Learning from Past: Case study of Gohar Mahal

Ar. Amrita Shukla1, Ar. Amandeep Kaur2

1
Department of Architecture, Lovely School of Architecture and Design, L.P.U., Phagwara, Punjab
2
Department of Architecture, Lovely School of Architecture and Design, L.P.U., Phagwara, Punjab

ABSTRACT
Passive solar technique is a method of collecting, storing and radiating heat energy in winter
and rejects solar heat in summer. The concept is to maintain thermal comfort in the building.
Adaptation of such technique is not new in India; many historical buildings are example of the
same. The case taken into consideration is a heritage building- Gohar Mahal at Bhopal in
Madhya Pradesh. The Gohar Mahal was built by the first women ruler of Bhopal- Gohar Begum
in 1820. The paper discuss about the analysis of passive solar technique adopted in Gohar
Mahal. The argument focus on effect of solar orientation, the use of thermal mass, proper
ventilation and appropriate placement of window in the built envelope and its microclimate to
achieve thermal comfort for the user. The Gohar Mahal is an appropriate example to explain
effective utilization of site and intelligent planning for adverse climatic condition to decrease
down the dependency on mechanical means. The analysis will help in catering the demand of
sustainable building, which can be a measure to overcome the dependency on mechanical
systems.

Keywords: Solar passive techniques, ventilation, solar orientation, sustainable, thermal mass,
climate.

1. INTRODUCTION
Now a day green building or sustainable architecture is in demand. The reason for the same is to
cut down the energy demand of building from non-renewable resources. Therefore there is demand
of building which are less dependent on energy for their successful operation, and answer comes in
the mind is Passive Solar Design. Solar passive design is a technique of collecting, storing and
radiating heat energy in winter and rejects solar heat in summer. Because of the heat radiation in
sun light, it creates temperature difference and results in airflow. In response to solar heat shading
elements is designed, material section, orientation and opening is done to have heating and cooling
effect within the built mass. India is having so many historical buildings, which was constructed by
taking climate responsive as prime goal. Bhopal also known as “The city of Lakes” is situated in
the central India and has humid subtropical climate, cold and dry winters, hot summer and humid
monsoon. The city has great history behind.

Sustainable Constructivism: Traditional vis-à-vis Modern Architecture ISBN: 978-93-83083-76-3 41

Ar. Amrita Shukla, Ar. Amandeep Kaur

The Gohar Mahal is situated in the upper bank of lake. The first women ruler of Bhopal named
Gohar Begum in 1820 built it. It’s a magnificent example of blend of Hindu and Islamic
architecture. The ministry of textile and Madhya Pradesh handloom and handicrafts vikas nigam
has taken initiative for maintaining the glorious historic building. INTACH has worked in its
renovation and reuse purpose of the Mahal by maintaining its original fabric and construction
details with new function imparted. The complex is converted into urban haat.

Gohar Mahal: The splendid three storied structure, built on a contoured site having approach from
road to the building at every floor. The site has the entrance from the south-east direction, where as
building has an entry from lake side i-e eastern corner of the Mahal. It is having two courtyards,
which divides it into three transverse mass. The total floor area of the Gohar Mahal is 650 sqm.
with massive load bearing wall of brick. The top floor is enclosed with wooden frame of mansard
roof covered with slate tile. The interior is finished with lath and plaster, and verandhas all around
the courtyards along with direct and indirect opening in the structure. The paper discuss about
various climate responsive feature of Gohar Mahal and thrust area is to analyze various passive
solar techniques inculcated in the planning of Gohar Mahal. The analysis will help in learning the
indigenous techniques adapted in past and its result, which is answer of now a day energy crises
and sustainable solution for better future. The various passive solar features of magnificent Gohar
Mahal are discussed as following:

Fig1: The Gohar Mahal Source: wikipedia.org

Sustainable Constructivism: Traditional vis-à-vis Modern Architecture ISBN: 978-93-83083-76-3 42

 Learning from Past: Case study of Gohar Mahal

Courtyard- the breathing space: The Gohar Mahal is divided into three part with two central
courtyard. Courtyard is an affective technique of shading, and also allowing light to enter inside the
building. It helps in maintaining pressure difference between hot air and cool air, which results in
air flow. To humidify the air, water sprinkler was used, hence thermal comfort is achieved. To
minimize the heating of external wall verandhas were used, which helps in attaining thermal buffer
by cutting off the heat and glare. The arcade along the periphery of courtyard helps in maintaining
the inside temperature by cutting the direct sunlight to enter the building. The parapet along the
courtyard are of low height and roof slope inward, towards courtyard for better Hence the
courtyards act as prime area for air exchange and day light which contributes in maintaining the
temperature cooler with proper lighting of interior space.

Fig2: Deep Verandahs around courtyard to cut direct sunlight Source: www.flickriver.com
Building envelop: Building envelop contributes primarily for the heat exchange of built up mass.
The first and most important thing to be considered is the heat loss and gain in a built up mass is
the material used. The effectiveness depends on decapitation of heat from wall and roof.

Wall: The massive wall of Gohar Mahal is made up of adobe bricks with some space made of
stone. The mud construction is an indigenous technique adopted in central India. As availability of
mud is in abundant and respond to the climatic condition of the site, it was basicly used as prime
construction material. The thickness of walls of gohar Mahal varies from 1500cm to 60cm
depending upon the location and purpose on the space. The adobe construction is very energy
efficient being warm in winter and cool in summer. The thick solid adobe walls posses the property
of thermal mass, because of which the adobe brick are heated by sun light it holds heat and
decapitate it slowly at night which is preferred in winter. To prevent from vive versa, sun is kept

Sustainable Constructivism: Traditional vis-à-vis Modern Architecture ISBN: 978-93-83083-76-3 43

Ar. Amrita Shukla, Ar. Amandeep Kaur

off from adobe wall by means of over hangs, shading device, verandas, and proper orientation, so
that they stay cool during the day and night of summer.

Low parapet

Shading device in form of

over hang

Shaded verandah

Water body

Fig3: The courtyard of Gohar Mahal with water body and arcade verandahs as shading
element. Source: www.indiamike.com
The Gohar Mahal is oriented in east-west direction, with courtyards and verandahs all around to
achieve the thermal mass property of adobe. Adobe wall also absorb sound and reduces echo,
which helps in maintaining the privacy of space.

Roof and floor: The rooms placed at the lake side are double roof. The secondary roof or false
ceiling provided below the structural roof is provided by gap. This gap between the two ceiling
comprises of air, which is a non conductor of heat, hence reduces the transmission of heat from
roof to interior of building. Few rooms are provided with high ceiling and small opening near roof.
As warm air rise up because of its light weight and escapes from the opening at the top, at the same
time cold air is replaced. The repetition of phenomenon results in good airflow within the space.
Hence the desired thermal comfort is achieved in interior.

Sustainable Constructivism: Traditional vis-à-vis Modern Architecture ISBN: 978-93-83083-76-3 44

 Learning from Past: Case study of Gohar Mahal

Openings: The openings are provided in form of door, window and ventilators for adequate
ventilation. Ventilation refers to exchange of air from outside, as well as flow of air within the
building. Natural ventilation is done by pressure difference between indoor and out-door air and
with effective opening for the escape for warm air. To achieve this ventilators are placed near the
roof. To cut off the direct sunlight the ventilators are inclined from outside to inside because of
which indoor space temperature is maintained cool. To enhance air circulation/ flow numbers of
Jharokhas are provided.

Fig4: The wind catchers of Gohar Mahal Source: http://www.tripadvisor.com

For better pressure difference for flow of air, hexagonal wind catchers are provided. Windows are
oriented according to prevalent wind direction. The window openings are placed in the exterior as
well as in the interior wall towards the verandahs and courtyards.

Sustainable Constructivism: Traditional vis-à-vis Modern Architecture ISBN: 978-93-83083-76-3 45

Ar. Amrita Shukla, Ar. Amandeep Kaur

Fig5: Ground floor plan of the Gohar Mahal showing wind movement Source: Report on
Gohar Mahal (INTACH Delhi)

Over hangs
Decorative Brackets

Fig6: The shading device supported with decorative stone brackets. Source: www.flickriver.com

Sustainable Constructivism: Traditional vis-à-vis Modern Architecture ISBN: 978-93-83083-76-3 46

 Learning from Past: Case study of Gohar Mahal

Shading device: Shading devices helps by facilitating in control of sunlight required in interior, by
cutting off the harsh summer sun and to gain direct solar radiation in winter. The over hangs are
provided on all the four side of the Gohar Mahal. The shading devices are 900mm wide with slight
slope towards outside of the building for easy run-off of rainwater and curtail the undesired
sunlight. Decorative stone brackets support the shading devices in form of overhangs. Hence the
only desired sun light is allowed within the built up mass to achieve the thermal comfort.

Building materials: The building material selected for the construction of building plays a vital
role. The material contributes in heat exchange and the thermal mass of building, which helps in
cutting down energy requirement as well as maintains indoor human comfort. The building
material used in various building component of the Gohar Mahal are: Adobe sun dried bricks,
stone, timber, lime, surkhi. The materials are intelligently used according to its thermal
conductivity like massive adobe sun dried brick for walls, at some places stones are also used.
Timber is used for door and window frame, floor joist and roof joist as timber is having low
thermal conductivity, good tensile strength and restrict no air and light to enter the space. To attain
smooth finish and acoustics plastering with mud and lime surkhi is done.

2. CONCLUSION
The Gohar Mahal is an appropriate example to learn effective utilization of site and intelligent
planning for varying climatic condition to decrease down the dependency on mechanical means.
The Gohar Mahal is having perfect east-west orientation to avoid direct sunlight, heat and glare.
The use of thermal mass in form of adobe walls, proper ventilation and appropriate placement of
window for entry of cold air and escape of hot air in the built envelope. The microclimate is
maintained by providing water body at the center of courtyard for the thermal comfort of user. The
appropriate uses of low thermal conductive material for construction add to achieve the required
comfort level. This gives us inspiration to respect the site and its surrounding with strong
consideration for climatic condition will help to make a building energy efficient with low
maintenance cost. The material selection for the construction work should be according to the need
of thermal comfort neither based on the materials that are in fashion. Now a day the buildings are
made, keeping aesthetics in consideration and sacrificing light, ventilation and solar orientation,
which results in increased dependency on mechanical means for heating and cooling. There are
many such historical buildings are available in India, which gives us the lesson to learn from the
past techniques adopted to conserve non-renewable resources.

REFERENCES
[1] Climate of Bhopal
http://en.wikipedia.org/wiki/Bhopal
[2] Gohar Mahal

Sustainable Constructivism: Traditional vis-à-vis Modern Architecture ISBN: 978-93-83083-76-3 47

Ar. Amrita Shukla, Ar. Amandeep Kaur

http://www.khojiworld.com/Default2.aspx
[3] Passive solar cooling techniques
http://architecturerevived.blogspot.in/2013/10/designing-passive-solar-heating-and.html
[4] Shading devices
http://www.wbdg.org/resources/suncontrol.php?r=sustainable
[5] Wind direction
http://www.theweatherprediction.com/habyhints2/432/ ,
[6] Bhopal Weather
http://www.mapsofindia.com/bhopal/weather.html
[7] Passive solar design
http://passivesolar.sustainablesources.com/#Consider
[8] Passive solar heating and cooling design
http://architecturerevived.blogspot.in/2013/10/designing-passive-solar-heating-and.html
[9] Passive solar design
http://www.teachengineering.org/view_lesson.php?url=collection/cub_/lessons/cub_housing/cub_hou
sing_lesson05.xml

Sustainable Constructivism: Traditional vis-à-vis Modern Architecture ISBN: 978-93-83083-76-3 48