CAC-Curewell WB: Water Based, Wax Emulsion Concrete Curing Compound

CAC-Curewell WB
Water based, wax emulsion concrete curing compound
Uses Application instructions

As a spray applied membrane to retain moisture in concrete Application
for effective curing.
Pigmented grades should be stirred before use to ensure
Suitable for all general concrete applications and of particular even dispersion of pigment.
benefit for large area concrete surfaces, such as airport
CAC-Curewell WB must be spray applied to the surface of fresh
runways, roads and bridgeworks.
concrete. Application should begin as soon as the concrete
Advantages is free from surface water. Do not apply if bleed water is
forming or present on the concrete surface.
Improved curing of concrete enhances cement hydration
* and provides a more durable concrete
The spray nozzle should be held approximately 450mm from
the concrete surface and passed back and forth to ensure
Control of moisture loss improves surface quality, reducing
* permeability, producing a hard-wearing, dust free surface
complete coverage. Pump pressure should be maintained
to give an even, fine spray.
and minimising potential for surface cracking and
shrinkage After spraying, no further application of water or other material
is necessary to ensure continued curing. The concrete
* Light reflective grades minimise solar temperature gain surface should not be disturbed until it has sufficient strength
* Spray application reduces labour costs and eliminates the
need for alternative curing systems.
to bear surface loads. The applied film should not be walked
on before it is fully dry and care should be taken to ensure
that the film is not broken.
Description
CAC-Curewell WB may also be applied to the surface of newly
CAC-Curewell WB concrete curing compound is water based hardened concrete immediately after demoulding. In such
wax emulsion film forming curing compound and is supplied cases the concrete surface should be sprayed with water to
with white pigmented. saturate it prior to the application of CAC-Curewell WB.Dry
surfaces may prevent correct film formation and cause
Aspect : Milky white liquid
absorption of the CAC-Curewell WB which may lead to get
Specific Gravity : 1.00 - 1.01 staining and difficulty in later removal.
Coverage rate
When first applied to a fresh cementitious surface the product
forms a continuous, non-penetrating coating. This coating The recommended coverage rate is between 3.5 and 5.0 m2
dries to a form a continuous film which provides a barrier to / litre (0.200 to 0.285 litres/m)2 . Coverage rates outside this
moisture loss ensuring more efficient cement hydration, recommended range may be used if necessary and suitable
improved durability and reduced shrinkage. to meet specific requirements. Contact local CAC office for any
advice in such cases.
Technical Support
Equipment
CAC provides a technical advisory service to the specifiers, Spray equipment producing a fine mist may be used for CAC-
end-users and contractors as well as on-site technical Curewell WB, such as knapsack or motorised sprayers. The
assistance in locations all over the country. suitability of equipment should be ensured by an application
Standards compliance trial.
CAC-Curewell WB gives 75% or greater curing efficiency Equipment cleaning

when tested as per ASTM C 309. Spray equipment should be cleaned immediately after use
by flushing throughly with clean water.
CAC-Curewell WB
Overcoating and removal Suitable protective gloves and goggles should be worn. Some
people are sensitive to resins and solvents. Resin Barrier
CAC-Curewell WB need not be removed from a concrete surface
creams provide additional skin protection.
before application of a subsequent coating.
Should accidental skin contact occur, remove immediately
Limitations with a resin removing cream followed by washing with soap
and water - do not use solvent.
Specifications calling for wax or water based curing
membranes can be met using CAC-Curewell WB. Incase of contact with eyes rinse immediately with plenty of
water and seek medical advice. If swallowed seek medical
Estimating attention immediately - do not induce vomiting.
Fire
Packaging
CAC-Curewell WB is non flammable.
CAC-Curewell WB is supplied in 20 and 200 ltrs containers.
Storage
CAC-Curewell WB has a minimum shelf life of 12 months, Cleaning and disposal

when stored in the original unopened containers under
normal warehouse conditions. Spillages of CAC-Curewell WB should be absorbed onto sand,
earth or vermiculite and transferred to suitable containers.
Precautions
The disposal of excess of waste material should be carried
out in accordance with local legislation under the guidance
Health and Safety
of the local waste regulatory authority.
CAC-Curewell WB should not be swallowed or allowed to come
into contact with skin and eyes. Avoid inhalation of vapours
and ensure adequate ventilation.

CAC-Curewell WB: Water Based, Wax Emulsion Concrete Curing Compound

Uploaded by

Copyright:

Available Formats

CAC-Curewell WB: Water Based, Wax Emulsion Concrete Curing Compound

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

CAC-Curewell WB: Water Based, Wax Emulsion Concrete Curing Compound

Uploaded by

Copyright:

Available Formats

CAC-Curewell WB

Water based, wax emulsion concrete curing compound

Uses Application instructions

CAC-Curewell WB gives 75% or greater curing efficiency Equipment cleaning

CAC-Curewell WB has a minimum shelf life of 12 months, Cleaning and disposal

You might also like