Mitsubishi Fuso Canter Fb-Fe-Fg PDF

CONTENTS
■ GENERAL INFORMATION
1. MODEL CODING SYSTEM
2. BODY CODING SYSTEM
3. EXTERIOR COLOR & INTERIOR CODE
4. CLASSIFICATION OF EXPORT VEHICLE SPECIFICATIONS
5. WEIGHTS DEFINITION
6. SPECIFIC GRAVITY OF GOODS
7. CONVERSION TABLE
■ BASIC MODELS & SPECIFICATIONS

1. CAB & CHASSIS
FB
FB71A Series Spec. No. FB71, 1 / 9
FE
FE71P / FE73P Series Spec. No. FE71 / 73, 1 / 11
FE83P / FE84P Series Spec. No. FE83 / 84, 1 / 13
FE85P Series Spec. No. FE85P, 1 / 9
FE85C-Z Series Spec. No. FE85C, 1 / 9
FG
FG83P Series Spec. No. FG83, 1 / 9
2. CARGO & DUMP TRUCK

CARGO TRUCK
FB71A Series Spec. No. FB71-C, 1 / 2
FE71P Series Spec. No. FE71-C, 1 / 2
FE83P Series Spec. No. FE83-C, 1/ 2
FE83P-W Series Spec. No. FE83W-C, 1 / 2
FE85P Series Spec. No. FE85P-C, 1 / 2
FE85C-Z Series Spec. No. FE85C-C, 1 / 2
FG83P Series Spec. No. FG83-C, 1 / 2
FG83P-W Series Spec. No. FG83W-C, 1 / 2
DUMP TRUCK
FE71PBD4 Series Spec. No. FE71-D, 1 / 2
FE83PCD6 Series Spec. No. FE83-D, 1 / 2
NOTE
The information in this material is accurate as of the date of publication.
Mitsubishi Fuso Truck and Bus Corporation reserves the right to make
changes in the specification, equipment or design, or to discontinue
models or options without notice at any time.
8TG4K0E066
1
■ GENERAL INFORMATION
1. MODEL CODING SYSTEM
2
2. BODY CODING SYSTEM
The BODY CODE mentioned the specification sheets of MITSUBISHI FUSO truck is used for
MFTBC production arrangement, which is classified as mentioned below.
BODY CODE BODY TYPE

CA WOODEN CARGO
CARGO
CS ALL STEEL CARGO
DA DROP TAIL
DB DROP SIDE & TAIL
DUMP
DC DROP TAIL, U-SECTION
DD SCOOP END
You are kindly requested to use BODY TYPE (EX: WOODEN CARGO) and BODY CODE (EX: CA)
at your order, so that we can follow your requiment adequately.
NOTE: CODE of ” TRUCK CHASSIS WITH CAB”→ ” AA”
3. EXTERIOR COLOR & INTERIOR CODE
EXTERIOR FB, FE, FG

COLOR CODE PAINT NAME
Cab & Chassis / Cab & Chassis with Body
W31 Natural White Standard
B00 Sonic Blue Option
G58 Forest Green Option
T89 Shannon Blue Option
INTERIOR CODE 00G
3
4. CLASSIFICATION OF EXPORT VEHICLE SPECIFICATIONS
(1) Results of a detailed analysis of past export achievements conspicuously show features
by area, such as the adoption of snorkel-type air intake in the Middle East and Africa and the
adoption of two-speed rear axle in Latin America. Equipment and accessories show a similar
tendency.
Deciding specifications by country and order looks as if it satisfies the requirements of the
owners greatly. However, besides making production and sales control of the manufacturer
and the sales agents complex and increasing the cost burden of the manufacturer, it results
in unsatisfactory supply of accessorial parts arising from confusion in specification control
(parts picked erroneously or missing parts, delay in delivery), raising fears of betraying the
owners’ reliance on the vehicles in the
long run. There have been such instances. Fig.1 Export Specifications Established
Export specifications have been therefore, MODEL
established as shown in Fig. 1 on the basis
of results of inspection trips made by
Variation
MITSUBISHI FUSO engineers in various Regional
places overseas and experience acquired Basic Spec. Option
Spec.
through business talks conducted, field
Coping with market
service report and orders received so far. adaptability Coping with owners' needs
Production and supply activities have Covering merchandis-
been conducted in accordance with the ability overseas
classification of export specifications.
(2) The classification of export specifications and their details are as follows.
Basic Specifications 1. Equipment standards that form the basis of Details are shown in this
publicity material, parts catalogues, etc., book.
but do not include options.
2. Equipment level that becomes the standard
for cost and price calculations.
3. Standard specifications for design
arrangements.
Regional Specifications 1. Specifications established beforehand by To cope individually with
area. basic specifications plus
2. Specifications established beforehand by options.
principal destination.
Tentative Specifications 1. Special specifications when orders are To cope individually with
received intermittently for small numbers. basic specifications plus
2. Special specifications at time of spot deal options.
business.
Options 1. Drive line combinations. Details are shown in this
2. Equipment, accessories. book.
(3) The Export Vehicle Specifications in this material show the Basic Specifications and the
Regional Specifications are not described herein. The Regional Specifications are separately
established for market-by-market basic in order to comply with the respective laws, rules and
regulations such as for vehicular laws and traffic rules, to incorporate the specifications in
conformity with the service conditions, and to provide additional equipment and accessories
for meeting with the customers’ needs and market tendency. Thus, the Regional Specifications
are repeatedly revised in accordance with the needs from time to time.
(4) In the case of mounting the body on the cab & chassis, please refer to the ” BODY
BUILDER’S DRAWING” of the technical information for installation (which is compiled and
issued for the vehicles separately by class-by-class basis).
4
5. WEIGHTS DEFINITION
A. Kerb Weight
The sum of weights of cab and chassis with full tank of fuel, specified quantity of oil and
coolant, exclusive of spare-tire and tools. Spare tire carrier and tool box, however, are
included, if supplied. The truck must be in running order.
B. Empty Vehicle Weight

The sum of kerb weight and weight of body.
C. Gross Vehicle Weight (G.V.W.)

This is the empty vehicle weight plus weights of payload and crew. The actual G.V.W.
may be less than but must not exceed the max. G.V.W. rating because the weight on each
axle of the vehicle with load evenly distributed must not exceed the axle’s weight rating.
This is explained in detail in the next paragraph on ” payload capacity and weight distri-
bution.” The MITSUBISHI FUSO specifications for special types of vehicles, such as
tankers, which can carry only specified load will list only the actual G.V.W. figures,
omitting the maximum G.V.W.
D. Maximum Gross Vehicle Weight (Max. G.V.W.)

・The sum of the weight ratings of the front and rear axles. The gross axle weight rating
is defined as the lowest capacity of any load-carrying components-springs, tires and
brake capacity.
・Some models, however, have their G.V.W. suppressed to less than the sum of front and
rear weight ratings so as to secure the reliability upon the power line.
・The G.V.W. given in the upper part of each specification in this material represents the
maximum G.V.W.
E. Payload Capacity and Weight Distribution

In order to ensure good stability and ride, the weight of the payload (cargo) must be
properly distributed, so that the gross axle weight rating of neither front nor rear axle is
exceeded. Improper distribution of the load may cause over-loading of the front or rear
axle, even if the max. G.V.W. is not exceeded. The specification of payload capacity of
MITSUBISHI FUSO trucks has been established to be compatible with the requirements of
proper load distribution.
5
As illustrated in Fig. 1, when the load center coin-
cides with the center of rear axle, the payload
distribution on the front axle is zero. This would
make the weight on the front axle extremely light
and render steering difficult-if not impossible.
Furthermore, since total payload would be placed
on the rear axle, it cannot be greater than the capac-
ity of the rear axle. In other words, the payload
capacity of the vehicle would be less than when
the load is optimally distributed between the front Fig.1
and rear axles.
Fig.2
When the load is uniformly applied to the body, the load center will be at its center. The
distance between the load center and the rear axle center is the offset (O.S.). In this
example it is 670 mm:
O.S.＝ 670 mm
The distribution of payload on the front axle (Pf) and rear (Pr) can be readily calculated
from the following formulae-in accordance with the lever principle:
O.S.
Pf ＝ P × (1)
W.B.
W.B.– O.S.
Pr ＝ P × (2)
W.B.
From these two, the following equations are derived:
W.B.
P ＝ Pf × (1)’
O.S.
W.B.
P ＝ Pr × (2)’
W.B.– O.S.
F. Maximum Gross Combination Weight (Max. G.C.W.)

This gives the total weight allowance of tractor plus trailer, crew and cargo; it is deter-
mined by the tractor’s engine horsepower, running performance and hill-climbing ability.
The max. G.V.W. for each model of MITSUBISHI FUSO tractors is given in its specifi-
cations. It is important that this total weight limit not be exceeded.
G. Weight of Crew
The weight of each person of a crew is assumed to be 65 kg, unless otherwise specified
by local regulations. In Japan, Korea and Taiwan, it is assumed to be 55 kg.
H. Carrying Capacity
This term is not used by MITSUBISHI FUSO. Occasionally it can be found in the sales
literature of other manufacturers. It indicates the max. G.V.W. less the kerb weight.
6
6. SPECIFIC GRAVITY OF GOODS
Specific gravity or apparent specific weight of a cargo varies depending on its ambient
conditions (temperature, humidity, barometric pressure, etc.) and moisture content. For
practical purposes, MFTBC uses the figures given in the following table for the specific
gravity of cargoes, unless otherwise specified by local regulations or customer’s require-
ment. The table gives data only on cargoes commonly hauled.
In specifying dump vessel capacity, MFTBC assumes apparent specific gravity of cargo to be
1.5 ton/cu.m for medium and heavy-duty models, and 1.3 ton/cu.m for light duty models
(CANTER)-in accordance with Japanese Vehicle Inspection Rules.
Apparent
Weight Weight
Goods Goods
ton/cu.m ton/cu.m
Petrol 0.75 1.65-1.70
Gravel
Kerosene 0.80 (20-25ømm)
Gas Oil 0.85 1.50-1.65
Sand
Heavy Oil 0.93 (1.0-2.5ømm)
Lubricating Oil 0.95 Coal 0.75-0.87
Liquid Asphalt 0.90 Dry Soil 1.6
Alcohol 0.80 Wet Soil 2.0
Formalin 1.05 Dry Clay 1.8
Ready Mixed Concrete 2.4 Wet Clay 2.0
Bulk Cement Powder 1.0 Snow 0.2-0.8
Aggregate 2.2 Feed Stuffs 0.5
Carbon Black 0.32 Wheat Flour 0.5
Vinyl Powder 0.45
Water, Milk 1.0
7
7. CONVERSION TABLE
■ MEASURES AND WEIGHTS
cm in m ft yd km mile
Measure
1 0.39370 1 3.28084 1.09361 1 0.62137
2.540 1 0.30480 1 0.3333 1.60934 1
0.9144 3.0000 1
sq. cm sq. in sq. m sq. ft sq. yd sq. km sq. mile

Area
1 0.1550 1 10.7639 1.19599 1 0.38610
6.4516 1 0.092903 1 0.1111 2.58999 1
0.083613 9.00 1
cu. m cu. ft cu. yd L U.S. gal lmp. gal

Volume 1 35.3147 1.3079 1 0.26417 0.21997
0.02832 1 0.37037 3.78543 1 0.83327
0.76455 27.00 1 4.5460 1.20091 1
g ounce kg lb
Weight 1 0.03527 1 2.20459
28.350 1 0.45360 1
PS hp kW
Horse Power
1 0.9860 0.7355
1.0142 1 0.7459
1.3596 1.340 1
kgf・m lb・ft N・m

Torque
1 7.2329 9.8067
0.1383 1 1.3558
0.1020 0.7375 1
■ DEGREE A AC AC
tan.θ＝ %＝ x100 (%)
BC BC
(in tanθ)
AC
deg.θ sin.θ＝
C B AB
deg.θ sin.θ tan.θ % (in tanθ) deg.θ sin.θ tan.θ % (in tanθ)
1 0.01745 0.01746 1.746 19 0.32557 0.34433 34.433
2 0.03490 0.03492 3.492 20 0.34202 0.36397 36.397
3 0.05234 0.05241 5.241 21 0.35837 0.38386 38.386
4 0.06976 0.06993 6.993 22 0.37461 0.40403 40.403
5 0.08716 0.08749 8.749 23 0.39073 0.42447 42.447
6 0.10453 0.10510 10.510 24 0.40674 0.44523 44.523
7 0.12187 0.12278 12.278 25 0.42262 0.46631 46.631
8 0.13917 0.14054 14.054 26 0.43837 0.48773 48.773
9 0.15643 0.15838 15.838 27 0.45399 0.50953 50.953
10 0.17365 0.17633 17.633 28 0.46947 0.53171 53.171
11 0.19081 0.19438 19.438 29 0.48481 0.55431 55.431
12 0.20791 0.21256 21.256 30 0.50000 0.57735 57.735
13 0.22495 0.23087 23.087 31 0.51504 0.60086 60.086
14 0.24192 0.24933 24.933 32 0.52992 0.62487 62.487
15 0.25882 0.26795 26.795 33 0.54464 0.64941 64.941
16 0.27564 0.28675 28.675 34 0.55919 0.67451 67.451
17 0.29237 0.30573 30.573 35 0.57358 0.70021 70.021
18 0.30902 0.32492 32.492
8
1. CAB & CHASSIS
Max. ENGINE
SERIES MODEL CAB TYPE & DRIVE SYSTEM G.V.W. OUTPUT
ton MODEL
kW (PS)
Standard Cab
FB FB71AB8 Tilt 3.5 4M40-0A 69 (94)
4x2
FE71PB8 4.4
FE71PBN4 Standard Cab 4.7

Tilt
FE73PB6 4x2
5.7
FE73PE6
FE83PC6 Wide Cab

Tilt 4D34-3A 80 (109)
FE83PE6 4x2
6.0
FORWARD CONTROL
Wide Double Cab

FE83PE6W Fixed
FE 4x2
FE84PC6
6.5
FE84PE6
FE85PC6
Wide Cab
FE85PE6 Tilt 7.2 4D34-2A 89 (120)
4x2
FE85PG6
FE85CGZ
8.0 4D33-4A 96 (130)
FE85CHZ
FG83PC6 Wide Cab

Tilt
FG83PE6 4x4
FG 5.5 4D34-3A 80 (109)
Wide Double Cab
FG83PE6W Fixed
4x4
Spec. No. FB71, 1/9
1. Model of Chassis
MODEL FB71AB8
G.V.W.
3,500 (7,715)
kg (lb)
ENGINE
4M40-0A
(Model)
WHEELBASE
2,500 (98.4)
mm (in.)
ANNOTATION
(1) This model is primarily designed for rigid application.
2. Body applications classified by model of chassis (¡: recommendable)

MODEL
FB71AB8
TYPE
Cargo Truck ¡
Aluminum Van ¡
Refrigerated Van ¡
Spec. No. FB71, 2/9
MITSUBISHI FUSO TRUCK CHASSIS

TYPE: FORWARD CONTROL, TILT CAB
CANTER DRIVE SYSTEM: 4 x 2, CREW: 3
ENGINE: 4M40-0A, DIESEL, 69 kW (94 PS)/4,000rpm
FB71A SERIES G. V. W.: 3,500 kg (7,715 lb), TIRE: 7.00-15-6PR (Front)
G. V. W.: 3,500 kg (7,715 lb), TIRE: 7.00-15-10PR (Rear)
CHASSIS DIMENSIONS, WEIGHTS AND PERFORMANCE

R.H.D. FB71AB8R
MODEL
L.H.D. FB71AB8L
Dimensions mm (in.)
Wheelbase 2,500 ( 98.4)
Overall length 4,660 (183.5)
Overall width 1,695 ( 66.7)
Overall height, approx. 2,005 ( 78.9)
Tread, front 1,405 ( 55.3)
Tread, rear 1,360 ( 53.5)
Ground clearance, approx. 200 ( 7.9)
Cab to rear axle 2,030 ( 79.9)
Cab to end of frame 3,190 (125.6)
Frame width 700 ( 27.6)
Front overhang 1,000 ( 39.4)
Rear overhang 1,160 ( 45.7)
Weights kg (lb)
Kerb weight (1) 1,525 (3,360)
front 1,115 (2,460)
rear 410 ( 905)
Max. G. V. W. 3,500 (7,715)
front 1,680 (3,705)
rear 2,160 (4,760)
Calculated Performance
Max. speed km/h (mph) 120 (74.6)
Max. gradeability (tan θ ) %
36.0
(with Max. G. V. W.)
Min. turning radius m (ft) 5.0 (16.4)
ANNOTATION
(1) Kerb weights shown are subject to 2.5% variation to allow for production tolerances. Kerb weights include weight of oil,
fuel, coolant but exclude spare tire carrier & bracket, spare tire & disc wheel and standard tool set.
985 470 3190

2030
102
2005 (APPROX)
7.00-15-
7.00-15-6PR 10PR
1000 2500 1160
4660
Spec. No. FB71, 3/9
BASIC CHASSIS SPECIFICATIONS

SERIES FB71AB8
Clutch
Model C2W26
Type Hydraulic control, diaphragm spring, single dry plate
Facing material Woven (asbestos free)
Facing outside dia. 260 mm (10. 2 in.)
Facing thickness 3.5 mm (0. 14 in.)
Total frictional area 304 sq.cm x 2 (47.1 sq.in. x 2 )
Transmission
Model M015S5
Type 5 forward and 1 reverse speed, 1st to 5th synchromesh, Rev. constantmesh gears
Gear ratios 4.733-2.753-1.490-1.000-0.839, Rev. 4.733
Control In-dash gear shift, mechanical remote control
Recommended oil grade API GL-3, SAE80
Propeller Shaft
Model P2
Size Pipe outside dia. 63.5 mm (2.50 in.), Thickness 2.6mm (0.10 in.)
Type Tubular, forged steel ends
Joints Universal joints with needle roller bearing
Rear Axle
Model R015T
Type Full floating type
Capacity 2,400 kg (5,290 lb)
Final reduction gear Single reduction, hypoid gear
Model D1H
Ratio 5.285
Front Axle
Model F100T
Type Reverse Elliot, "Ι" beam
Tires and Disc Wheels Single front, single rear
Front 7.00-15-16PR11 11 1
Tire size
Tire size Rear 7.00-15-10PR 11
Tread pattern Rib
Disc wheel size
15 x 5.50F-25-4.5t, 6 studs, 2 pieces
Type-offset-thickness
Steering System
Type Ball-nut type. Telescopic and tilt steering column with steering lock
Gear ratio 28 ~ 33 : 1
Steering wheel dia 400 mm (15.7 in.)
Service Brake
Actuation Hydraulic with vacuum servo assistance, dual circuit
Size Drum dia. x Lining width x Lining thickness
Front 279 mm x 60 mm x 5.5 mm (11.0 in. x 2.36 in. x 0.22 in.)
Rear 300 mm x 60 mm x 7.0 mm (11.0 in. x 2.36 in. x 0.28 in.)
Total lining area 1,412 sq.cm (218.9 sq.in.)
Vacuum reservoir 4 lits. (dm3) (0.88 Imp.gals. or 1.06 U.S.gals.)
Parking Brake
Actuation Internal expanding type on propeller shaft at rear of transmission
Drum dia. x Lining width x Lining thickness
Size
180 mm x 35 mm x 5.3 mm (7.1 in. x 1.38 in. x 0.21 in. )
Total lining area 130 sq.cm (20.2 sq.in.)
Spec. No. FB71, 4/9
BASIC CHASSIS SPECIFICATIONS (continued)

SERIES FB71AB8
Suspensions
Springs
Type Semi-elliptic, laminated leaf springs
Rating, ground
Front 900 kg (1,985 lb), each
Rear 1,200 kg (2,645 lb), each
Dimensions Span x Width x Thickness-No. of leaves
9 mm- 2 ( 0.35 in.)
Front 1,200 mm x 70 mm x (47.2 in. x 2.76 in. x )
10 mm- 2 0.39 in.)
1,200 mm x 70 mm x (47.2 in. x 2.76in. x
11 mm-2 0.43 in.
Main 1,200 mm x 70 mm x 18 mm-1 (47.2 in. x 2.76 in. x 0.71 in.)
Rear
95 mm x 65 mm x 85 mm (3.74 in. x 2.56 in. x 3.35 in.)
Helper (Rubber)
Shock absorbers Hydraulic double acting telescopic type on front and rear axles
Cooling System
Radiator Corrugated fin type and condense tank
Rows of tubes 2
Height x Width
Core size
525 mm x 438 mm (20.7 in. x 17.2 in.)
Fan Outside dia. 450 mm (17.7 in.), 10 blade, P. P. with thermomodulating fan coupling
Ratio 1.12
Frame
Type Parallel, tapered channel section with reinforcement and crossmembers
Dimensions Depth x Flange x Thickness
Main side rails 140 mm x 50 mm x 4.0 mm (5.51 in. x 1.97 in. x 0.16 in.)
Material Hot rolled steel
Fuel System
Fuel tank 70 lits. (dm3) (15.4 Imp.gals. or 18.5 U.S.gals.)
Water separator Visible type
Exhaust System Conventional (horizontal) type muffler
Tail pipe Drop tail type, blowing to chassis rearward
Air Intake System Snorkel type at rear of cab (right side)
Air cleaner position At rear of cab (right side)
Electrical System 12 Volt, regulated control
12 Volt x 1, 110 Ah (396 kC) at 20 hr rate (115E41L)
Battery
80 Ah (317 kC) at 5 hr rate (115E41L)
Electrical Equipment
Head lamps Unique rectanguler 2 lamps, halogen semi sealed
Low beam 1155W-2 : White
High beam 1160W-2 : White
Position 115W-2 : White
Front combination lamps
Turn signal/Hazard 111121W-2 : Amber (Front)
Rear combination lamps
Turn signal/Hazard 1121W-2 : Amber
Tail 115W-2 : Red
Stop 1121W-2 : Red
Back-up 1121W-2 : White
Licence plate lamp 1110W-1 : White
Instruments
Meter cluster Fixed type
Meters ¡Speedometer (km/h) with odometer and trip meter ¡Fuel gauge ¡Water temp. gauge (°C)11
Warning lamps and ¡Turn signal/hazard ¡Brake fluid level/parking ¡Fuel filter warning lamp
¡High beam/passing brake ¡Glow plug indicator
indicators
¡Oil pressure/filter blockage ¡Alternator
Horn Single, electric type
Spec. No. FB71, 5/9

SERIES FB71AB8
Cab
Mounting Fixed type, isolated 4 points
Construction Tilt type with torsion bars, all steel welded construction
Windshield One piece type of laminated glass
Dual blades, high & low speeds and intermittent wiping with washer and water tank
Windshield wipers
3 lits. (dm3) (0.66 Imp.gals. or 0.79 U.S.gals.)
High back type (seat pan and urethane foam rubber cushioned),
Driver's seat
16-stage reclining, 19-stage sliding, vinyl leather
Center: Low back bench type (spring and urethane foam rubber cushioned), vinyl leather
Passenger seat
Window side: High back type combined with center seat
¡2 access handles ¡Coat hook ¡Front emblem
¡2 combination switches ¡Cup holder "MITSUBISHI FUSO" &
,
¡2 door switches ¡Driver s sun visor "CANTER"
¡2 exterior rear view mirrors ¡Duplicate key of starter, ¡Grip for cab tilt/down
Appointments ¡A4 document box fuel stop and door (assistseat side)
¡Access step, each side ¡Engine idling control ¡Insulator under cab floor
¡Armrest (each door) button ¡Multi pocket
¡Ashtray (each door) ¡Floor vinyl mat ¡Room lamp (10W x 1)
¡Box with lid ¡Forced ventilator ¡Ticket holder
¡Card holder ¡Tray (instrument panel)
Paint Finish coat, Natural White
Chassis Equipment ¡One hook each at front and rear ¡Tools for changing tire including 2 ton hydraulic jack
Caution Plate English
Measurement Metric
Spec. No. FB71, 6/9
BASIC ENGINE SPECIFICATIONS

CHASSIS MODEL FB71AB8
Engine Model MITSUBISHI FUSO 4M40-0A
Type 4 stroke-cycle, water-cooled diesel engine with swirl chamber
No. of Cylinders 4 in line
Bore x Stroke 95 mm x 100 mm (3.74 in. x 3.94 in.)
Piston Displacement 2.835 L (173.1 cu. in.)
Compression Ratio 21 : 1
69 kW (94 PS) (JIS)
66 kW (90 PS) (DIN)
Max. Output
64 kW (86 hp) (SAE, Gross)
at 4,000 rpm (66.7 r/s) (1)
191 N·m (19.5 kgf·m, 141 lb·ft ) (JIS)
188 N·m (19.2 kgf·m, 139 lb·ft ) (DIN)
Max. Torque
179 N·m (18.3 kgf·m, 132 lb·ft ) (SAE, Gross)
at 2,000 rpm (33.3 r/s) (1)
Weight 260 kg (573 lb) in wet
Oil System
Oil filter Full-flow filter with paper element, throwaway type
Oil cooler Water-cooled
Oil pan capacity 6.0 lits. (dm3) (1.32 Imp.gals. or 1.59 U.S.gals.)
Recommended oil grade API service classification CC or CD
Cooling System Pressure type with thermostat, forced circulation by centrifugal pump
Coolant capacity 11 lits. (dm3) (2.42 Imp.gals. or 2.91 U.S.gals.)
Fan P. P. blade
Fuel System
Fuel filter Full-flow filter with paper element, throwaway type
Injection pump Bosch VE type
Governor All-speed mechanical type
Fuel Diesel fuel oil (cetane number 45 and more)
Air Cleaner Dry paper element
Alternator 12 Volt, 75 Amp.
Starter DC 12Volt, 2.2 kW
Vacuum Pump Vane type
Displacement 60 cc (3.7 cu.in.)
Engine Dust-proof Includes dust-proof alternator, crankcase breather and dipstick
ANNOTATION
(1) Max. speed of 4M40-0A engine is 4,200 rpm (70.0 r/s).
REMARKS
(1) Output and torque represent performance of run-in engine operating under the standard ambient conditions and
accessories specified below.
(2) Rated output is guaranteed within 5% under the standard ambient conditions.
STANDARD BARO. PRESSURE TEMP. OF INLET AIR ACCESSORIES*

JIS JIS D1004 760 mmHg (101.3 kPa), dry 15.0 °C Fan**, Air cleaner
Fan**, Intake and
DIN DIN 70020 760 mmHg (101.3 kPa) 20.0 °C exhaust system of vehicle***
SAE, Gross SAE J1349 742.6 mmHg (99 kPa), dry 25.0 °C ──
* Other than built-in accessories essential to engine operation.

** 4M40-0A, 450 mm dia. 10 blades, P. P., fan ratio 1.12
*** Output (DIN) is based on the assumptions that max. inlet restriction is 350 mm H2O (3.4 kPa) and max. exhaust back
pressure is 150 mmHg (19.9 kPa).
Spec. No. FB71, 7/9
ENGINE PERFORMANCE CURVES

MITSUBISHI FUSO 4M40-0A DIESEL ENGINE
(kgf·m)
N·m
lb·ft
145 196
TORQUE
(20)
135 177
125 (18)
115 157
(16)
105
70
(95)
kW(hp): SAE, Gross
kW(PS): JIS & DIN
60
(82)
50 SAE
(68) DIN
BRAKE SPECIFIC FUEL CONSUMPTION

OUTPUT
JIS
40
(54)
(g/PS·h)
30
g/kW·h
lb/hp·h
(41)
326
20 B. S. F. C 0.50 (240)
(27) 299
(220)
0.45 272
(200)
0.40 245
(180)
1600 2000 2400 2800 3200 3600 4000 4200

ENGINE SPEED (rpm)
VEHICLE PERFORMANCE CURVES

FB71AB8
1400
ENGINE MODEL 4M40-0A
40% MAX. OUTPUT 69kW (94PS)/4000rpm
1300 MAX. TORQUE 191N·m (19.5 kgf·m)/2000rpm
GROSS WEIGHT 3500kg
TIRE SIZE 7.00-15-10
1200 35% TIRE RADIUS 0.355m
T/M G/RATIO
1st 4.733
1100 2nd 2.755
30% 3rd 1.490
4th 1.000
1000
1 5th 0.839
R
Rev. 4.733
RUNNING RESISTANCE AND TRACTION (kg)
900 FINAL G/RATIO 5.285

25%
×1000
800 8
20%
15%
700 7
600 6
10%
ENGINE SPEED (rpm)
2
500 5
R 2 5
1 3 4 5% 4
400
3%
300 3 3
4 0%
200 2
5
100 1
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140
VEHICLE SPEED (km/h)
Spec. No. FB71, 8/9
CHASSIS LAYOUT
FB71AB8L
1695
1360
700
985 470 3190
2030
102
2005 (APPROX)
7.00-15-
7.00-15-6PR 10PR
1405 1000 2500 1160
4660
NOTE :
These drawings show left hand drive model. For right hand drive model, exterior rear view mirror and windshield wiper on
left and right sides are symmetric with respect to the chassis center line.
Spec. No. FB71, 9/9
FB71A SERIES OPTIONAL EQUIPMENT

CAB
INTERIOR
AM radio DIN size radio fitted to instrument panel, electronic tuning type,
with digital clock and one speaker
AM/FM radio, stereo*1 DIN size radio fitted to instrument panel, electronic tuning type,
with digital clock and two speakers
DIN size radio fitted to instrument panel, electronic tuning type,
AM/FM radio & cassette stereo
with digital clock and cassette player with two speakers
Armrest for driver's seat Adjustable type
Cigarette lighter Electric type
Door pockets Driver and passenger side
Fabric seat Deluxe type seat
Floor mat Carpet type. Only for R.H.D. model
Full trim Side trim, rear pillar trim & rear panel trim. Installing "Seat belts" is necessary
Interior rear view mirror Flat type
Large room lamp 10W x 1
Overhead shelf Installed on right side
Seat back tray and Tray on window side and center passenger seat back,
back panel console console on back panel
Driver and window side passenger … 3 point type with ELR
Seat belts
Center … 2 point type
Sun visor For window side passenger
Urethane foam steering wheel Surface material: Urethane foam rubber
EXTERIOR
Fog lamps White (35W x 2), fitted to front bumper
Under view mirror Opposite to driver side
INSTRUMENT
4.18 kW (3,600 kcal/h, 15,070 kJ/h), manual control type, includes heater
Air conditioner
and defroster
Heater and defroster 4.47 kW (3,850 kcal/h, 16,116 kJ/h), manual control type
Power windows Driver and passenger side
Tachometer Electric driven type
2-DIN box with lid Total 5-DIN space is provided
CHASSIS
115 Ah (414 kC) at 20 hr rate (130E41L) x 1
Heavy duty battery
92 Ah (331 kC) at 5 hr rate (130E41L) x 1
Lockable fuel tank cap For protection from fuel thief
Power steering *2 Integral type hydraulic power booster
Radial tire With tube (Including spare tire carrier & spare tire)
Reverse warning buzzer Synchronized with reverse gear of transmission
Spare tire
Spare tire carrier
Stabilizer, front
Standard tool set
*1 Except for Central and South America

*2 Installing front stabilizer and changing front tire size (6.50-15-8PRb 7.00-15-6PR) are necessary.
ANNOTATION
SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
Spec. No. FE71/73, 1/11
1. Model of Chassis
MODEL FE71PB8 FE71PBN4 FE73PB6 FE73PE6
G.V.W.
4,400 (9,700) 4,700 (10,360) 5,700 (12,565)
kg (lb)
ENGINE
4D34-3A
(Model)
WHEELBASE
2,500 (98.4) 3,350 (131.9)
mm (in.)
ANNOTATION
(1) These models are primarily designed for rigid application.

MODEL
FE71PB8 FE71PBN4 FE73PB6 FE73PE6
TYPE
Cargo Truck ¡ ¡ ¡ ¡
Dump Truck (2) ¡ (1)(4) (2) (2)
Aluminum Van ¡ ¡ ¡
Refrigerated Van ¡ ¡ ¡
Cargo with Crane ¡ (3)(4) ¡(3)(4)
ANNOTATIONS
(1) The following optional equipments must be added when this chassis is used for dump body. (except for telescopic front end type)
・Transmission P.T.O. (on/off control lever type)
・Tire-lug pattern
・Heavy duty springs
(2) These models must not be used for dump or mixer application.
(3) Transmission P.T.O. and its control device are available as optional equipment.
(4) Suitable chassis reinforcement must be added for the cargo with crane or dump body.
Spec. No. FE71/73, 2/11

ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm
FE71P SERIES G. V. W. : 4,400 kg ( 9,700 lb), TIRE: 7.50-15-10PR
G. V. W. : 4,700 kg (10,360 lb), TIRE: 6.50-16-10PR

R.H.D. FE71PB8R FE71PBN4R
MODEL
L.H.D. FE71PB8L FE71PBN4L
Dimensions mm (in.)
Wheelbase 2,500 ( 98.4) 2,500 ( 98.4)
Overall length 4,660 ( 183.5) 4,630 ( 182.3)
Overall width 1,695 ( 66.7) 1,695 ( 66.7)
Overall height, approx. 2,005 ( 78.9) 1,995 ( 78.5)
Tread, front 1,390 ( 54.7) 1,390 ( 54.7)
Tread, rear 1,380 ( 54.3) 1,235 ( 48.6)
Ground clearance , approx. 1,200 ( 7.9) 1,190 ( 7.5)
Cab to rear axle 2,030 ( 79.9) 2,030 ( 79.9)
Cab to end of frame 3,095 ( 121.9) 3,105 ( 122.2)
Frame width 1,700 ( 27.6) 1,700 ( 27.6)
Front overhang 1,000 ( 39.4) 1,000 ( 39.4)
Rear overhang 1,065 ( 41.9) 1,075 ( 42.3)
Weights kg (lb)
Kerb weight (1) 1,735 ( 3,825) 1,845 ( 4,065)
front 1,270 ( 2,800) 1,285 ( 2,835)
rear 1,465 ( 1,025) 1,560 ( 1,235)
Max. G. V. W. 4,400 ( 9,700) 4,700 (10,360)
front 2,000 ( 4,410) 2,000 ( 4,410)
rear 2,560 ( 5,645) 3,300 ( 7,275)
Max. speed km/h (mph) 120 (74.6) 115 (71.5)
47.0 45.0
Min. turning radius m (ft) 5.1 (16.7) 5.1 (16.7)
ANNOTATION
985 470 3095

2030
102
2005 (APPROX)
7.50-15-10PR
1000 2500 1065 95
4660
Spec. No. FE71/73, 3/11

FE73P SERIES G. V. W. : 5,700 kg (12,565 lb), TIRE: 7.00-16-10PR

R.H.D. FE73PB6R FE73PE6R
MODEL
L.H.D. FE73PB6L FE73PE6L
Dimensions mm (in.)
Wheelbase 2,500 ( 98.4) 3,350 ( 131.9)
Overall length 4,575 ( 180.1) 5,885 ( 231.7)
Overall width 1,870 ( 73.6) 1,870 ( 73.6)
Tread, front 1,390 ( 54.7) 1,390 ( 54.7)
Tread, rear 1,435 ( 56.5) 1,435 ( 56.5)
Ground clearance , approx. 1,200 ( 7.9) 1,200 ( 7.9)
Cab to rear axle 2,030 ( 79.9) 2,880 ( 113.4)
Frame width 1,700 ( 27.6) 1,700 ( 27.6)
Front overhang 1,000 ( 39.4) 1,000 ( 39.4)
Rear overhang 1,075 ( 42.3) 1,480 ( 58.3)
Weights kg (lb)
Kerb weight (1) 1,890 ( 4,165) 1,960 ( 4,320)
front 1,305 ( 2,875) 1,360 ( 3,000)
rear 1,585 ( 1,290) 1,600 ( 1,325)
Max. G. V. W. 5,700 (12,565) 5,700 (12,565)
front 2,260 ( 4,980) 2,260 ( 4,980)
rear 4,100 ( 9,040) 4,100 ( 9,040)
Max. speed km/h (mph) 110 (68.4) 110 (68.4)
37.5 37.5
ANNOTATION
985 470 3105

2030
102
2055 (APPROX)
7.00-16-10PR
1000 2500 1075
4575
Spec. No. FE71/73, 4/11

SERIES FE71PB8 FE71PBN4 FE73PB6 FE73PE6
Clutch
Model C3W28
Facing outside dia. 275 mm (10.8 in.)
Facing thickness 3.8 mm (0.15 in.)
Total frictional area 353 sq.cm x 2 (54.7 sq.in. x 2)
Transmission
Model M025S5
Gear ratios 5.181-2.865-1.593-1.000-0.739, Rev. 5.181
Propeller Shaft
Model P2
Size Pipe outside dia. 63.5 mm (2.50 in.), Thickness 2.6 mm (0.10 in.)
Type Tubular, forged steel ends Tubular, forged steel ends with center bearing
Joints Universal joints with needle roller bearings
Rear Axle
Model R020T
Capacity 3,300 kg (7,275 lb) 4,100 kg (9,040 lb)
Model D2H
Ratio 5.714 6.166
Front Axle
Model F200T
Single front,
Tires and Disc Wheels Single front, dual rear
single rear1
Tire size 7.50-15-10PR 6.50-16-10PR 7.00-16-10PR
Tread pattern Rib
Disc wheel size 15 x 5.50F-50-4.5t,
16 x 5.50F-115-8t, 5 studs, 2 pieces
Type-offset-thickness 6 studs, 2 pieces
Steering System
Steering wheel dia. 400 mm (15.7 in.)
Service Brake
Front 300 mm x 70mm x 7 mm 320 mm x 75mm x 10 mm
(11.8 in. x 2.76 in. x 0.28 in.) (12.6 in. x 2.95 in. x 0.39 in.)
Rear 300 mm x 60mm x 7 mm 320 mm x 75mm x 10 mm
Total lining area 1,632 sq.cm (253.0 sq.in.) 2,088 sq.cm (323.6 sq.in.)
Parking Brake
Size
Spec. No. FE71/73, 5/11

SERIES FE71PB8 FE71PBN4 FE73PB6 FE73PE6
Suspensions
Springs
Rating, ground
1,100 kg (2,425 lb), 1,150 kg (2,535 lb), 1,200 kg (2,645 lb),
Front
each each each
1,400 kg (3,085 lb), 1,650 kg (3,635 lb), 2,100 kg (4,630 lb),
Rear
each each each
Dimensions mm (in.) Span x Width x Thickness-No. of leaves
10-2 10-1
1,200 x 70 x 1,200 x 70 x 1,200 x 70 x 10-5
11-2 11-3
Front 0.39 0.39
(47.2 x 2.76 x ) (47.2 x 2.76 x ) (42.7 x 2.76 x 0.39)
0.43 0.43
11-2
11-3 11-4
1,250 x 70 x 10-1 1,250 x 70 x 1,250 x 70 x
18-1 10-1
18-1
Main 0.43
0.43 0.43
(49.2 x 2.76 x 0.39 ) (49.2 x 2.76 x ) (49.2 x 2.76 x )
0.71 0.39
0.71
Rear
100 x 70 x 85 180 x 70 x 110
(3.9 x 2.76 x 3.35) (7.1 x 2.76 x 4.33) 990 x 70 x 8-4
Helper (39.0 x 2.76 x 0.31)
(Rubber) (Rubber)
Cooling System
Rows of tubes 2
Height x Width
Core size
525 mm x 438 mm (20.7 in. x 17.2 in.)
Fan Outside dia. 430 mm (16.9 in.), 8 blade, P.P. with thermomodulating fan coupling
Ratio 1.27
Frame
Fuel System
100 lits. (dm3)
Fuel tank 70 lits. (dm3) (15.4 Imp.gals. or 18.5 U.S.gals.) (22.0 Imp.gals.
or 26.4 U.S.gals.)
Air Intake System Snorkel type at rear of cab (left side)
Air cleaner position At rear of cab (left side)
12 Volt x 2, 65 Ah (234 kC) at 20 hr rate (75D26L)
Batteries
Tail 5W-2 : Red
Stop 21W-2 : Red
Instruments
Meters ¡Speedometer (km/h) with odometer and trip meter ¡Fuel gauge ¡Water temp. gauge (˚C)
¡Turn signal/hazard ¡Vacuum pressure ¡Brake fluid level/parking brake
Warning lamps and ¡High beam/passing ¡Alternator
indicators ¡Oil pressure/filter blockage
Spec. No. FE71/73, 6/11

SERIES FE71P, FE73P
Cab
Construction Tilt type torsion bar, all steel welded construction
Windshield wipers
Driver's seat
Center: Low back bench type (seat pan and urethane foam rubber cushioned), vinyl leather
Passenger seat
Window side: High back type combined with center seat
¡2 door switches ¡Driver's sun visor "CANTER"
¡2 exterior rear view mirrors ¡Duplicate key of starter, ¡Grip, for cab titl/down
¡A4 document box fuel stop and door (assistseat side)
Appointments
Measurement Metric
ANNOTATION
(1) FE71PBN4 spare tire carrier and bracket are not available in cab and chassis form.
Spec. No. FE71/73, 7/11

CHASSIS MODEL FE71P, FE73P
Engine Model MITSUBISHI FUSO 4D34-3A
Type 4 stroke-cycle, water-cooled direct injection diesel engine
Bore x Stroke 104 mm x 115 mm (4.09 in. x 4.53 in. )
Piston Displacement 3.907 L (238.4 cu.in.)
Compression Ratio 17.5 : 1
80 kW (109 PS) (JIS)
78 kW (106 PS) (DIN)
Max. Output
76 kW (102 hp) (SAE,Gross)
at 3,200 rpm (53.3 r/s) (1)
255 N·m (26.0 kgf·m, 188 lb·ft) (JIS)
251 N·m (25.6 kgf·m, 185 lb·ft) (DIN)
Max. Torque
240 N·m (24.5 kgf·m, 177 lb·ft) (SAE, Gross)
at 1,800 rpm (30.0 r/s)
Weight 325 kg (716 lb) in dry
Oil System
Oil pan capacity 9 lits. (dm3) (1.98 Imp.gals. or 2.38 U.S.gals.)
Coolant capacity 14.5 lits. (dm3) (3.19 Imp.gals. or 3.83 U.S.gals.)
Fan P. P. blade
Fuel System
Injection pump Bosch type, 4 plungers in line
Starter DC 24 Volt, 3.7 kW
ANNOTATION
(1) Max. speed of 4D34-3A engine is 3,400 rpm (56.6 r/s).
REMARKS

Fan**, Intake and
DIN DIN 70020 760 mmHg (101.3 kPa) 20.0 °C
exhaust system of vehicle***

** 4D34-3A, 430 mm dia. 8 blades, P. P., fan ratio 1.27
Spec. No. FE71/73, 8/11

MITSUBISHI FUSO 4D34-3A DIESEL ENGINE
(kgf·m)
N·m
lb·ft
255
185 (26)
TORQUE
175 235
(24)
165 216
155 (22)
80 145 196
(109) (20)
kW(hp): SAE, Gross
kW(PS): JIS & DIN
70
(95)
60
(82) SAE
DIN

OUTPUT
JIS
50
(68)
40
(54)
(g/PS·h)
g/kW·h
30 lb/hp·h
(41)
0.45 272
(200)
B. S. F. C 0.40 245
(180)
218
0.35 (160)
1400 1800 2200 2600 3000 3200 3400

ENGINE SPEED (rpm)

FE71PB8 FE73PB6／FE73PE6
2400 2400
ENGINE MODEL 4D34-3A ENGINE MODEL 4D34-3A
MAX. OUTPUT 80kW (109PS)/3200rpm MAX. OUTPUT 80kW (109PS)/3200rpm
2250 MAX. TORQUE 255N·m (26.0 kgf·m)/1800rpm 2250 MAX. TORQUE 255N·m (26.0 kgf·m)/1800rpm
GROSS WEIGHT 4400kg 40% GROSS WEIGHT 5700kg
2100 TIRE SIZE 7.50-15-10 TIRE SIZE 7.00-16-10
2100
TIRE RADIUS 0.367m TIRE RADIUS 0.368m
50%
T/M G/RATIO T/M G/RATIO
1950 1st 5.181 1950 1st 5.181
35%
45% 2nd 2.865 2nd 2.865
1800 3rd 1.593 1800 3rd 1.593
4th 1.000 4th 1.000
40% 5th 0.739 30% 5th 0.739
1650 1650
Rev. 5.181 Rev. 5.181

FINAL G/RATIO 5.714 FINAL G/RATIO 6.166
1500 35% 1500
25%
30% 1
R 20%
1350 1 1350
R 25%
×1000 ×1000
1200 8 1200 8
20% 15%
1050 7 1050 7
ENGINE SPEED (rpm)
ENGINE SPEED (rpm)
900 6 900 6
15%
10%
750 5 750 2 5
2
10%
600 1 4 4 600 4
R 2 3 5 R 2 3 4 5
1 5%
5% 3
450 3 450 3
3 3%
3%
300 2 300 2
4 0%
4 5 0% 5
150 1 150 1
0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 0 10 20 30 40 50 60 70 80 90 100 110 120 130
VEHICLE SPEED (km/h) VEHICLE SPEED (km/h)
Spec. No. FE71/73, 9/11
CHASSIS LAYOUT
FE71PB8L
1380
1695
700
985 470 3095
2030
102
2005 (APPROX)
7.50-15-10PR
1390 1000 2500 1065 95
4660
FE71PBN4L
1695
1235
700
985 470 3105

2030
102
1995 (APPROX)
6.50-16-10PR
1390 1000 2500 1075 55
4630
NOTE :
Spec. No. FE71/73, 10/11
CHASSIS LAYOUT
FE73PB6L
1695
1870
1435
700
985 470 3105
2030
102
2055 (APPROX)
7.00-16-10PR
1390 1000 2500 1075
4575
FE73PE6L
1695
1435
1870
700
985 470 4360

2880
102
2055 (APPROX)
7.00-16-10PR
1390 1000 3350 1480 55
5885
NOTE :
Spec. No. FE71/73, 11/11
FE71P/73P SERIES OPTIONAL EQUIPMENT

CAB
INTERIOR
AM radio
AM/FM radio, stereo
Seat belts
EXTERIOR
INSTRUMENT
Air conditioner
and defroster
CHASSIS
Exhaust brake Vacuum operated, butterfly valve type
80 Ah (288 kC) at 20 hr rate (95D31L) x 2
Heavy duty battery
Heavy duty spring, front 10 mm-2 0.39 in.
1,200 mm x 70 mm x 11 mm-3 (47.2 in. x 2.76 in. x 0.43 in. )
(only for FE73P)
Ground rating: 1,300 kg (2,865 lb)
11 mm-4 0.43 in.
Main: 1,250 mm x 70 mm x 10 mm-1 (49.2 in. x 2.76 in. x 0.39 in.)
Heavy duty spring, rear
8 mm-4 0.31 in.
(only for FE73P) Helper: 990 mm x 70 mm x 9 mm-2 (39.0 in. x 2.76 in. x 0.35 in.)
Power steering * Integral type hydraulic power booster
With tube (Including spare tire carrier & spare tire. Excluding spare
Radial tire
tire carrier for FE71PBN4)
Spare tire
Spare tire carrier Not available for FE71PBN4
Stabilizer, front Only for FE71PB8
Standard tool set
Tool box Fitted to side frame (only for FE73PE6)
Tool box with padlock Fitted to side frame (only for FE73PE6)
Output capacity: 147 N·m (15 kgf·m,108 Ib·ft)/2,000 rpm (33.3 r/s)
Transmission P.T.O. Output speed: 0.683 x Engine speed
Rotation: Opposite engine
Control: Cable remote control
ENGINE
Combine with fuel injection pump to reduce black-smoke at high altitude
Altitude fuel compensator
operation
Glow plugs with indicator To assist easy engine starting in cold season or area
Fuel/Oil filter Center bolt type, replaceable paper element
Transmission P.T.O. (on/off control lever type)
OTHER Dump chassis package
Tire–Lug pattern, Heavy duty springs
* In case of FE71PB8, installing front stabilizer and changing tire size(7.00-15-8 PRb 7.50-15-10 PR) are necessary.
ANNOTATION
Spec. No. FE83/84, 1/13
1. Model of Chassis
FE83PE6W
MODEL FE83PC6 FE83PE6 FE84PC6 FE84PE6
(Double cab)
G.V.W.
6,000 (13,230) 6,500 (14,330)
kg (Ib)
ENGINE
4D34-3A
(Model)
WHEELBASE 2,750 3,350 3,350 2,750 3,350

mm (in.) (108.3) (131.9) (131.9) (108.3) (131.9)
ANNOTATION

MODEL FE83PE6W
FE83PC6 FE83PE6 FE84PC6 FE84PE6
TYPE (Double cab)
Cargo Truck ¡ ¡ ¡ ¡ ¡
(2)(4) (1) (1) (1) (1)
Dump Truck ¡ ¡ ¡ ¡ ¡
Aluminum Van ¡ ¡ ¡ ¡ ¡
Refrigerated Van ¡ ¡ ¡ ¡ ¡
(3)(4) (3)(4) (3)(4) (3)(4)
Cargo with Crane ¡ ¡ ¡ ¡ ¡
ANNOTATIONS
(1) These models must not be used for dump or mixer applications.
(2) The following optional equipments must be added when this chassis is used for dump body. (except for telescopic front end type)
・Transmission P.T.O. (on/off control lever type)
・Tire-lug pattern
・Heavy duty springs
(4) Suitable chassis reinforcement must be added for the cargo with crane or dump body.
Spec. No. FE83/84, 2/13

TYPE: FORWARD CONTROL, TILT CAB (EXCEPT DOUBLE CAB)
CANTER DRIVE SYSTEM: 4 x 2, CREW: 3...SINGLE CAB
DRIVE SYSTEM: 4 x 2, CREW: 7...DOUBLE CAB
FE83P SERIES ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm
G.V.W.: 6,000 kg (13,230 lb), TIRE: 7.00-16-12PR

R.H.D. FE83PC6R FE83PE6R FE83PE6WR
MODEL
L.H.D. FE83PC6L FE83PE6L FE83PE6WL
Dimensions mm (in.)
Wheelbase 2,750 (108.3) 3,350 (131.9) 3,350 (131.9)
Overall length 5,215 (205.3) 6,030 (237.4) 6,030 (237.4)
Overall width 1,995 ( 78.5) 1,995 ( 78.5) 1,995 ( 78.5)
Overall height, approx. 2,200 ( 86.6) 2,200 ( 86.6) 2,260 ( 89.0)
Tread, front 1,655 ( 65.2) 1,655 ( 65.2) 1,655 ( 65.2)
Tread, rear 1,495 ( 58.9) 1,495 ( 58.9) 1,495 ( 58.9)
Ground clearance, approx. 200 ( 7.9) 200 ( 7.9) 200 ( 7.9)
Cab to rear axle 2,225 ( 87.6) 2,825 (111.2) 1,825 ( 71.9)
Cab to end of frame 3,490 (137.4) 4,305 (169.5) 3,305 (130.1)
Frame width 750 ( 29.5) 750 ( 29.5) 750 ( 29.5)
Front overhang 1,145 ( 45.1) 1,145 ( 45.1) 1,145 ( 45.1)
Rear overhang 1,265 ( 49.8) 1,480 ( 58.3) 1,480 ( 58.3)
Weights kg (lb)
Kerb weight (1) 2,045 ( 4,510) 2,075 ( 4,575) 2,285 ( 5,035)
front 1,440 ( 3,175) 1,470 ( 3,240) 1,575 ( 3,470)
rear 605 ( 1,335) 605 ( 1,335) 710 ( 1,565)
Max. G. V. W. 6,000 (13,230) 6,000 (13,230) 6,000 (13,230)
front 2,260 ( 4,980) 2,260 ( 4,980) 2,260 ( 4,980)
rear 4,200 ( 9,260) 4,200 ( 9,260) 4,200 ( 9,260)
Max. speed km/h (mph) 110 (68.4) 110 (68.4) 110 (68.4)
35.0 35.0 35.0
Min. turning radius m (ft) 5.1 (16.7) 6.0 (19.7) 6.0 (19.7)
ANNOTATION
1088 525 3490

2225
38
2200 (APPROX)
7.00-16-12PR
1145 2750 1265 55
5215
Spec. No. FE83/84, 3/13

FE84P SERIES G.V.W.: 6,500 kg (14,330 lb), TIRE: 7.00-16-12PR

R.H.D. FE84PC6R FE84PE6R
MODEL
L.H.D. FE84PC6L FE84PE6L
Dimensions mm (in.)
Wheelbase 2,750 ( 108.3) 3,350 ( 131.9)
Overall length 5,215 ( 205.3) 6,030 ( 237.4)
Overall width 1,995 ( 78.5) 1,995 ( 78.5)
Tread, front 1,665 ( 65.6) 1,665 ( 65.6)
Tread, rear 1,495 ( 58.9) 1,495 ( 58.9)
Ground clearance, approx. 200 ( 7.9) 200 ( 7.9)
Cab to rear axle 2,225 ( 87.6) 2,825 ( 111.2)
Frame width 753 ( 29.6) 753 ( 29.6)
Front overhang 1,145 ( 45.1) 1,145 ( 45.1)
Rear overhang 1,265 ( 49.8) 1,480 ( 58.3)
Weights kg (lb)
Kerb weight (1) 2,115 ( 4,665) 2,145 ( 4,730)
front 1,460 ( 3,220) 1,480 ( 3,265)
rear 655 ( 1,445) 665 ( 1,465)
Max. G. V. W. 6,500 (14,330) 6,500 (14,330)
front 2,460 ( 5,425) 2,460 ( 5,425)
rear 4,500 ( 9,920) 4,500 ( 9,920)
Max. speed km/h (mph) 110 (68.4) 110 (68.4)
32.0 32.0
ANNOTATION
1088 525 3490

2225
38
2200 (APPROX)
7.00-16-12PR
1145 2750 1265 55
5215
Spec. No. FE83/84, 4/13

SERIES FE83P FE84P
Clutch
Model C3W28
Transmission
Model M025S5
Gear ratios 5.181-2.865-1.593-1.000-0.739, Rev. 5.181
Propeller Shaft
Model P2
FE83PC/FE84PC: Pipe outside dia. 63.5 mm (2.50 in.), Thickness 2.3 mm (0.09 in.)
Size
FE83PE/FE84PE: Pipe outside dia. 63.5 mm (2.50 in.), Thickness 2.6 mm (0.10 in.)
Type Tubular, forged steel ends with center bearing
Rear Axle
Model R020T
Model D2H
Ratio 6.166
Front Axle
Model F200T
Tire size 7.00-16-12PR
Tread pattern Rib
Disc wheel size
16 x 5.50F-115-8t, 5 studs, 2 pieces
Steering System
Service Brake
Front 320 mm x 75 mm x 10 mm (12.6 in. x 2.95 in. x 0.39 in.)
Rear 320 mm x 75 mm x 10 mm (12.6 in. x 2.95 in. x 0.39 in.)
Parking Brake
Size
Exhaust Brake ── Vacuum operated, butterfly valve type
Spec. No. FE83/84, 5/13

SERIES FE83P FE84P
Suspensions
Springs
Rating, ground
Front 1,200 kg (2,645 lb), each
Rear 2,100 kg (4,630 lb), each 2,400 kg (5,290 lb), each
Front 1,200 mm x 70 mm x 10 mm-5
(47.2 in. x 2.76 in. x 0.39 in.)
11 mm-4 10 mm-1
1,250 mm x 70 mm x 1,250 mm x 70 mm x
10 mm-1 11 mm-5
Main
0.43 in. 0.39 in.
(49.2 in. x 2.76 in. x ) (49.2 in. x 2.76 in. x )
0.39 in. 0.43 in.
Rear
8 mm-4
990 mm x 70 mm x
990 mm x 70 mm x 8 mm-4 9 mm-2
Helper
(39.0 in. x 2.76 in. x 0.31 in.) 0.31 in.
(39.0 in. x 2.76 in. x )
0.35 in.
Cooling System
Rows of tubes 2
Height x Width
Core size
525 mm x 518 mm (20.7 in. x 20.4 in.)
Fan Outside dia. 430 mm (16.9 in.), 8 blade, P.P. with thermomodulating fan coupling
Ratio 1.27
Frame
190 mm x 60 mm x 4.5 mm 193 mm x 61.5 mm x 6.0 mm
Main side rails
Fuel System
Batteries
52 Ah (187 kC) at 5 hr rate (75D26L)
Tail 5W-2 : Red
Stop 21W-2 : Red
Instruments
Meters ¡Speedometer (km/h) with odometer and trip meter ¡Fuel gauge ¡Water temp. gauge (˚C)
Warning lamps and
¡High beam/passing ¡Exhaust brake ¡Alternator
indicators ¡Oil pressure/filter blockage (only for FE84)
Spec. No. FE83/84, 6/13

SERIES FE83P, FE84P
Cab
Mounting Fixed type, isolated 4 points (isolated 6 points for FE83PE6W)
Construction Tilt type with torsion bar, all steel welded construction (fixed cab for FE83PE6W)
Windshield wipers
Driver's seat
Passenger seat
Window side: High back type combined with center seat, 14-stage reclining
Only for FE83PE6W. Low back type (spring and urethane foam rubber cushioned),
Rear seat
vinyl leather
¡2 access handles ¡Cup holder ¡Grip, for cab tilt/down
¡2 combination switches ¡Driver's sun visor (assistseat side)
¡2 door switches ¡Duplicate key of starter, ¡Insulator under cab floor
¡2 exterior rear view mirrors fuel stop and door ¡Multi pocket
¡A4 document box ¡Engine idling control ¡Room lamp (10W x 1) /
Appointments
¡Access step, each side button Room lamp (10W + 10W,
¡Armrest (each door) ¡Floor vinyl mat only for FE83PE6W)
¡Ashtray (each door) ¡Forced ventilator ¡Ticket holder
¡Box with lid ¡Front emblem ¡Tray (instrument panel)
¡Card holder "MITSUBISHI FUSO" &
¡Coat hook "CANTER"
(except for FE83PE6W)
Measurement Metric
Spec. No. FE83/84, 7/13

CHASSIS MODEL FE83P, FE84P
80 kW (109 PS) (JIS)
78 kW (106 PS) (DIN)
Max. Output
at 3,200 rpm (53.3 r/s) (1)
255 N m (26.0 kgf.m, 188 lb.ft) (JIS)
.
251 N.m (25.6 kgf.m, 185 lb.ft) (DIN)
Max. Torque
240 N.m (24.5 kgf.m, 177 lb.ft) (SAE, Gross)
at 1,800 rpm (30.0 r/s)
Oil System
Fan P. P. blade
Fuel System
ANNOTATION
REMARKS

Fan**, Intake and
DIN DIN 70020 760 mmHg (101.3 kPa) 20.0 °C

Spec. No. FE83/84, 8/13

(kgf·m)
N·m
lb·ft
255
185 (26)
TORQUE
175 235
(24)
165 216
155 (22)
80 145 196
kW(hp): SAE, Gross (109) (20)
kW(PS): JIS & DIN
70
(95)
60
(82) SAE
DIN

OUTPUT
JIS
50
(68)
40
(54)
(g/PS·h)
g/kW·h
lb/hp·h
30
(41)
0.45 272
(200)
B. S. F. C 0.40 245
(180)
218
0.35 (160)
1400 1800 2200 2600 3000 3200 3400

ENGINE SPEED (rpm)
FE83PC6／FE83PE6／FE83PE6W FE84PC6／FE84PE6
2400 2400
ENGINE MODEL 4D34-3A ENGINE MODEL 4D34-3A
40% MAX. OUTPUT 80kW (109PS)/3200rpm MAX. OUTPUT 80kW (109PS)/3200rpm
2250 MAX. TORQUE 255N·m (26.0 kgf·m)/1800rpm 2250 MAX. TORQUE 255N·m (26.0 kgf·m)/1800rpm
35%
GROSS WEIGHT 6000kg GROSS WEIGHT 6500kg
2100 TIRE SIZE 7.00-16-12 TIRE SIZE 7.00-16-12
2100
35% TIRE RADIUS 0.368m TIRE RADIUS 0.368m
T/M G/RATIO T/M G/RATIO
1950 1st 5.181 1950 30% 1st 5.181
2nd 2.865 2nd 2.865
1800 3rd 1.593 1800 3rd 1.593
30%
4th 1.000 4th 1.000
5th 0.739 25% 5th 0.739
1650 1650
Rev. 5.181
Rev. 5.181
FINAL G/RATIO 6.166 FINAL G/RATIO 6.166
1500 25%
1500
20%
1 20% 1
1350 R R
1350
×1000 15% ×1000
1200 8 1200 8
15%
1050 7 1050 7
ENGINE SPEED (rpm)
ENGINE SPEED (rpm)
900 6 900 6
10%
10%
750 2 5 2 5
750
600 4 600 4
R 2 3 4 5 R 2 3 4 5 5%
1 5% 1
450 3 3 450 3 3
3% 3%
300 2 300 2
4 0% 4 0%
5 5
150 1 150 1
0 0 0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 0 10 20 30 40 50 60 70 80 90 100 110 120
VEHICLE SPEED (km/h) VEHICLE SPEED (km/h)
Spec. No. FE83/84, 9/13
CHASSIS LAYOUT
FE83PC6L
FE83PC6L
1995
1495
750
1088 525 3490
2225
38
2200 (APPROX)
7.00-16-12PR
1655 1145 2750 1265 55
5215
FE83PE6L
1495
1995
750
1088 525 4305

2825
38
2200 (APPROX)
7.00-16-12PR
1655 1145 3350 1480 55
6030
NOTE :
Spec. No. FE83/84, 10/13
CHASSIS LAYOUT
FE83PE6WL
FE83PE6WL
1995
1495
750
1088 1525 3305
1825
28
2260 (APPROX)
7.00-16-12PR
1655 1145 3350 1480 55
6030
NOTE :
Spec. No. FE83/84, 11/13
CHASSIS LAYOUT
FE84PC6L
FE84PC6L
1995
1495
753
1088 525 3490
2225
38
2200 (APPROX)
7.00-16-12PR
1665 1145 2750 1265 55
5215
FE84PE6L
FE84PE6L
1995
1495
753
1088 525 4305

2825
38
2200 (APPROX)
7.00-16-12PR
1665 1145 3350 1480 55
6030
NOTE :
Spec. No. FE83/84, 12/13
FE83P/84P SERIES OPTIONAL EQUIPMENT (1／2)

CAB
INTERIOR
AM radio
AM/FM radio, stereo
Fitted between driver seat and passenger seat, not available for standard
Floor console
double cab
Full trim Side trim, rear pillar trim & rear panel trim. Installing "Seat belt" is necessary
Seat back tray and Tray on window side and center passenger seat back, console on back panel.
back panel console Not available for double cab
Seat belts
EXTERIOR
INSTRUMENT
Air conditioner
and defroster
Dual air conditioner Includes heater and defroster. Only for L.H.D. model of double cab
Capacity: 1.0 kg
Fire extinguisher
Can't be installed with floor console
Power windows Driver and passenger side. Front windows only on double cab
Spec. No. FE83/84, 13/13
FE83P/84P SERIES OPTIONAL EQUIPMENT (2／2)

CHASSIS
Exhaust brake Vacuum operated, butterfly valve type, standard for FE84P series
Fuel tank, spare 70 lits. (dm3) with key Adds to main fuel tank 100 lits. (dm3), only for FE83PE, FE84PE
Heavy duty battery
10 mm-2 0.39 in.
1,200 mm x 70 mm x ( 47.2 in. x 2.76 in. x )
Heavy duty spring, front 11 mm-3 0.43 in.
11 mm-4 0.43 in.
Main: 1,250 mm x 70 mm x (49.2 in. x 2.76 in. x )
10 mm-1 0.39 in.
8 mm-4 0.31 in.
(For FE83PC6/E6/E6W) Helper: 990 mm x 70 mm x (39.0 in. x 2.76 in. x )
9 mm-2 0.35 in.
10 mm-1 0.39 in.
Main: 1,250 mm x 70 mm x (49.2 in. x 2.76 in. x )
11 mm-5 0.43 in.
8 mm-5 0.31 in.
(For FE84PC6/E6) Helper: 990 mm x 70 mm x (38.9 in. x 2.76 in. x )
9 mm-2 0.35 in.
Power steering Integral type hydraulic power booster
Spare tire
Spare tire carrier
Stabilizer, front
Standard tool set
Tool box Fitted to side frame
Tool box with padlock Fitted to side frame
Transmission P.T.O. Output speed: 0.683 x Engine speed
ENGINE
operation
Fuel/Oil filter Center bolt type with replaceable paper element
Transmission P.T.O. (on/off control lever type)
OTHER Dump chassis package
Tire–Lug pattern, Heavy duty springs
ANNOTATION
Spec. No. FE85P, 1/9
1. Model of Chassis
MODEL FE85PC6 FE85PE6 FE85PG6
G.V.W.
7,200 (15,875)
kg (Ib)
ENGINE
4D34-2A
(Model)
WHEELBASE
2,750 (108.3) 3,350 (131.9) 3,850 (151.6)
mm (in.)
ANNOTATION

MODEL
FE85PC6 FE85PE6 FE85PG6
TYPE
Cargo Truck ¡ ¡ ¡
(1) (1) (1)
Dump Truck
(2)(3) (2)(3) (2)(3)
Cargo with Crane ¡ ¡ ¡
ANNOTATIONS
(3) Suitable chassis reinforcement must be added for the cargo with crane.

CANTER TYPE: FORWARD CONTROL, TILT CAB
DRIVE SYSTEM: 4 x 2, CREW: 3
FE85P SERIES G. V. W.: 7,200 kg (15,875 lb), TIRE: 7.50-16-10PR

R.H.D. FE85PC6R FE85PE6R FE85PG6R
MODEL
L.H.D. FE85PC6L FE85PE6L FE85PG6L
Dimensions mm (in.)
Wheelbase 2,750 ( 108.3) 3,350 ( 131.9) 3,850 ( 151.6)
Overall length 5,215 ( 205.3) 6,030 ( 237.4) 6,750 ( 265.7)
Overall width 2,035 ( 80.1) 2,035 ( 80.1) 2,035 ( 80.1)
Tread, front 1,665 ( 65.6) 1,665 ( 65.6) 1,665 ( 65.6)
Tread, rear 1,560 ( 61.4) 1,560 ( 61.4) 1,560 ( 61.4)
Cab to rear axle 2,225 ( 87.6) 2,825 ( 111.2) 3,325 ( 130.9)
Cab to end of frame 3,490 ( 137.4) 4,305 ( 169.5) 5,025 ( 197.8)
Frame width 753 ( 29.6) 753 ( 29.6) 753 ( 29.6)
Front overhang 1,145 ( 45.1) 1,145 ( 45.1) 1,145 ( 45.1)
Rear overhang 1,265 ( 49.8) 1,480 ( 58.3) 1,700 ( 66.9)
Weights kg (lb)
Kerb weight (1) 2,255 ( 4,970) 2,300 ( 5,070) 2,320 ( 5,115)
front 1,520 ( 3,350) 1,550 ( 3,415) 1,565 ( 3,450)
rear 735 ( 1,620) 750 ( 1,655) 755 ( 1,665)
Max. G. V. W. 7,200 (15,875) 7,200 (15,875) 7,200 (15,875)
front 2,660 ( 5,865) 2,660 ( 5,865) 2,660 ( 5,865)
rear 5,060 (11,155) 5,060 (11,155) 5,060 (11,155)
Max. speed km/h (mph) 110 (68.4)11 110 (68.4)11 110 (68.4)11
33.0
33.0 33.0
33.0 33.0
33.0
Min. turning radius m (ft) 5.1 (16.7)11 6.0 (19.7)11 6.8 (22.3)11
ANNOTATION
1088 525 3490

2225
38
2210 (APPROX)
7.50-16-10PR
1145 2750 1265 55
5215

SERIES FE85P
Clutch
Model C4W30
Facing thickness 4.0 mm ( 0.15 in.)
Total frictional area 423 sq.cm x 2 (65.6 sq.in. x 2 )
Transmission
Model M035S5
Type 5 forward and 1 reverse speed, 2nd to 5th synchromesh, 1st and Rev. constantmesh gears
Gear ratios 5.380-3.028-1.700-1.000-0.722, Rev. 5.380
Recommended oil grade API GL–3, SAE80
Propeller Shaft
Model P3
FE85PC/FE85PG: Pipe outside dia. 82.6 mm (3.25 in.), Thickness 2.3 mm (0.09 in.)
Size
FE85PE: Pipe outside dia. 82.6 mm (3.25 in.), Thickness 3.5 mm (0.14 in.)
Rear Axle
Model R035T
Model D035H
Ratio 6.166
Front Axle
Model F350T
Tread pattern Rib
Disc wheel size
16 x 6.00GS-127-9t, 6 studs, 2 pieces
Steering System
Service Brake
Vacuum reservoir 4 lits. (0.88 Imp.gals. or 1.06 U.S.gals.)
Parking Brake
Size
Exhaust Brake Vacuum operated, butterfly valve type

SERIES FE85P
Suspensions
Springs
Type Semi-elliptic , laminated leaf springs
Rating, ground
1,200 mm x 70 mm x 11 mm-5
Front
(47.2 in. x 2.76 in. x 0.43 in.)
10 mm-1
1,250 mm x 70 mm x
11 mm-5
Main
0.39 in.
(49.2 in. x 2.76 in. x )
0.43 in.
Rear
9 mm-2
990 mm x 70 mm x 10 mm-4
9 mm-1
Helper
0.35 in.
(39.0 in. x 2.76 in. x 0.39 in.)
0.35 in.
Cooling System
Rows of tubes 2
Height x Width
Core size
525 mm x 518 mm (20.7 in. x 20.4 in.)
Ratio 1.27
Frame
Main side rails 193 mm x 61.5 mm x 6.0 mm (7.60 in. x 2.42 in. x 0.23 in.)
Fuel System
Batteries
Tail 5W-2 : Red
Stop 21W-2 : Red
Instruments
Meters ¡Speedometer (km/h) with odometer and trip meter ¡Fuel gauge ¡Water temp. gauge (˚C)111
Warning lamps and ¡Turn signal/hazard ¡Vacuum pressure ¡Brake fluid level/parking brake
indicators
¡Oil pressure/filter blockage

SERIES FE85P
Cab
Construction Tilt type with torsion bar, all steel welded construction
Windshield wipers
Driver's seat
Passenger seat
¡2 exterior rear view mirrors ¡Duplicate key of starter, ¡Grip, for cab tilt/down
Chassis Equipment ¡One hook each at front and rear ¡Tools for changing tire including 4 ton hydraulic jack11
Measurement Metric

CHASSIS MODEL FE85P
89 kW (120 PS) (JIS)
85 kW (115 PS) (DIN)
Max. Output
at 3,200 rpm (53.3 r/s) (1)
295 N m (30.0 kgf.m, 217 lb.ft) (JIS)
.
289 N.m (29.5 kgf.m, 213 lb.ft) (DIN)
Max. Torque
at 1,800 rpm (30.0 r/s)
Oil System
Fan P. P. blade
Fuel System
ANNOTATION
REMARKS

Fan**, Intake and
DIN DIN 70020 760 mmHg (101.3 kPa) 20.0 °C exhaust system of vehicle***

ENGINE PERFORMANCE CURVES VEHICLE PERFORMANCE CURVES
MITSUBISHI FUSO 4D34-2A DIESEL ENGINE FE85PC6／FE85PE6／FE85PG6

2800
(kgf·m)
ENGINE MODEL 4D34-2A
N·m
MAX. OUTPUT 89kW (120PS)/3200rpm
lb·ft
294 GROSS WEIGHT 7200kg
215 (30)
275 35% TIRE SIZE 7.50-16-10
205
TORQUE
(28) 2400 TIRE RADIUS 0.383m
195 255
(26) T/M G/RATIO
185
90 235 1st 5.380
175 (24) 2200
(122) 165 30%
2nd 3.028
216
(22) 3rd 1.700
kW(hp): SAE, Gross
4th 1.000
2000
kW(PS): JIS & DIN
80 5th 0.722
1

(109) Rev. 5.380
R
25% FINAL G/RATIO 6.166
1800
70 ×1000
(95) 1600 8
SAE 20%
DIN
OUTPUT
60 JIS 1400 7
15%
(82)
1200 6
ENGINE SPEED (rpm)

50
(68) 2 10%
1000 5
(g/PS·h)
g/kW·h
lb/hp·h
40 800 4
(54) R1 2 3 4 5
0.45 272 5%
(200) 600 3
30 B. S. F. C 0.40 245 3
(180) 3%
(41)
218
0.35 (160) 400 2
4
0%
1200 1600 1800 2000 2400 2800 3200 3600
200 5 1
ENGINE SPEED (rpm)
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130
CHASSIS LAYOUT
FE85PC6L
1995
1560
2035
753
1088 525 3490

2225
38
2210 (APPROX)
7.50-16-10PR
1665 1145 2750 1265 55
5215
CHASSIS LAYOUT
FE85PE6L
1995
2035
1560
753
1088 525 4305
2825
38
2210 (APPROX)
7.50-16-10PR
1665 1145 3350 1480 55
6030
FE85PG6L
FE85PG6L
1995
1560
2035
753
1088 525 5025

3325
38
2210 (APPROX)
7.50-16-10PR
1665 1145 3850 1700 55
6750
NOTE :
FE85P SERIES OPTIONAL EQUIPMENT

CAB
INTERIOR
AM radio
AM/FM radio, stereo
Floor console Fitted between driver seat and passenger seat
Seat belts
EXTERIOR
INSTRUMENT
Air conditioner*
and defroster
Capacity: 1.0 kg
Fire extinguisher
CHASSIS
Fuel tank, spare 70 lits.(dm3) with key Adds to main fuel tank 100 lits. (dm3), only for FE85PE, FE85PG
80 Ah (288 kC ) at 20 hr rate (95D31L) x 2
Heavy duty battery
64 Ah (230 kC ) at 5 hr rate (95D31L) x 2
Power steering Integral type hydraulic power booster
Radial tire With tube (Including spare tire carrier & spare tire )
Spare tire
Spare tire carrier
Stabilizer front
Standard tool set
Output capacity: 147 N·m (15 kgf·m, 108 Ib·ft)/2,000 rpm (33.3 r/s )
Output speed: 0.683 x Engine speed
Transmission P.T.O.
ENGINE
operation
* Engine idling up kit is mandatory, in case of installing air conditioner locally.
ANNOTATION
Spec. No. FE85C, 1/9
1. Model of Chassis
MODEL FE85CGZ FE85CHZ
G.V.W.
8,000 (17,635)
kg (Ib)
ENGINE
4D33-4A
(Model)
WHEELBASE
3,870 (152.4) 4,170 (164.2)
mm (in.)
ANNOTATION

MODEL
FE85CGZ FE85CHZ
TYPE
Cargo Truck ¡ ¡
(1) (1)
Dump Truck
Aluminum Van ¡ ¡
Refrigerated Van ¡ ¡
(2)(3) (2)(3)
Cargo with Crane ¡ ¡
ANNOTATIONS
(3) Suitable chassis reinforcement must be added for the cargo with crane.

FE85C-Z SERIES G. V. W. : 8,000 kg (17,635 lb), TIRE: 7.50-16-14PR

R.H.D. FE85CGZR FE85CHZR
MODEL
L.H.D. FE85CGZL FE85CHZL
Dimensions mm (in.)
Wheelbase 3,870 (152.4) 4,170 (164.2)
Overall length 6,735 (265.2) 7,210 (283.9)
Overall width 2,135 ( 84.1) 2,135 ( 84.1)
Tread, front 1,665 ( 65.6) 1,665 ( 65.6)
Tread, rear 1,660 ( 65.4) 1,660 ( 65.4)
Ground clearance, approx. 210 ( 8.3) 210 ( 8.3)
Cab to rear axle 3,345 (131.7) 3,645 (143.5)
Cab to end of frame 4,985 (196.3) 5,460 (215.0)
Frame width 840 ( 33.1) 840 ( 33.1)
Front overhang 1,145 ( 45.1) 1,145 ( 45.1)
Rear overhang 1,640 ( 64.6) 1,815 ( 71.5)
Weights kg (lb)
Kerb weight (1) 2,410 ( 5,315) 2,425 ( 5,345)
front 1,605 ( 3,540) 1,620 ( 3,570)
rear 805 ( 1,775) 805 ( 1,775)
Max. G. V. W. 8,000 (17,635) 8,000 (17,635)
front 3,020 ( 6,660) 3,020 ( 6,660)
rear 5,760 (12,700) 5,760 (12,700)
Max. speed km/h (mph) 110 (68.4) 110 (68.4)
31.0 31.0
ANNOTATION
1088 525 4985

3345
38
2220 (APPROX)
7.50-16-14PR
1145 3870 1640 80
6735

SERIES FE85C-Z
Clutch
Model C4W30
Transmission
Model M035S5
Type 5 forward and 1 reverse speed, 2nd to 5th synchromesh, 1st and Rev. constantmesh gears
Gear ratios 5.380-3.028-1.700-1.000-0.722, Rev. 5.380
Recommended oil grade API GL–3, SAE80
Propeller Shaft
Model P3
Rear Axle
Model R040T
Model D040H
Ratio 6.166
Front Axle
Model F350T
Tread pattern Rib
Disc wheel size
16 x 6.00GS-127-9t, 6 studs, 2 pieces
Steering System
Type Ball-nut type with integral type hydraulic power booster.
Telescopic and tilt steering column with steering lock
Gear ratio 22.7 : 1
Service Brake
Actuation Hydraulic with oil servo assistance, dual circuit
Vacuum reservoir -
Parking Brake
Size
Exhaust Brake Vacuum operated, butterfly valve type

SERIES FE85C-Z
Suspensions
Springs
Rating, ground
Front 1,400 kg (3,086 lb ), each
Rear 3,100 kg (6,800 lb ), each
Front 1,200 mm x 70 mm x 11 mm-5 (47.2 in. x 2.76 in. x 0.43 in.)
11 mm-1 0.43 in.
Main 1,300 mm x 70 mm x 14 mm-2 (51.2 in. x 2.76 in. x 0.55 in.)
11 mm-1 0.43 in.
Rear
10 mm-1 0.39 in.
900 mm x 70 mm x 12 mm-1 (35.4 in. x 2.76 in. x 0.47 in.)
Helper
13 mm-1 0.51 in.
11 mm-2 0.43 in.
Shock absorbers Hydraulic double acting telescopic type on front axle
Cooling System
Rows of tubes 2
Height x Width
Core size
525 mm x 518 mm (20.7 in. x 20.4 in.)
Ratio 1.27
Frame
Type Ladder type, channel section with crossmembers
Material Rolled high tensile steel
Fuel System
Batteries
Tail 5W-2 : Red
Stop 21W-2 : Red
Instruments
Meters ¡Speedometer (km/h) with odometer and trip meter ¡Fuel gauge ¡Water temp. gauge(˚C)
Warning lamps and ¡Turn signal/hazard ¡Vacuum pressure ¡Brake fluid level/parking brake
indicators
¡Oil pressure/filter blockage

SERIES FE85C-Z
Cab
Construction Tilt type with torsion bar, all steel welded construction
Windshield wipers
Driver's seat
Passenger seat
¡2 exterior rear view mirrors ¡Duplicate key of starter, ¡Grip, for cab tilt/down
Chassis Equipment ¡One hook each at front and rear ¡Tools for changing tire including 4 ton hydraulic jack11
Measurement Metric

CHASSIS MODEL FE85C-Z
Compression Ratio 18 : 1
96 kW (130 PS) (JIS)
92 kW (125 PS) (DIN)
Max. Output
at 3,200 rpm (53.3 r/s) (1)
304 N m (31.0 kgf.m, 224 lb.ft) (JIS)
.
299 N.m (30.5 kgf.m, 221 lb.ft) (DIN)
Max. Torque
at 1,800 rpm (30.0 r/s)
Oil System
Fan P. P. blade
Fuel System
ANNOTATION
REMARKS

DIN DIN 70020 760 mmHg (101.3 kPa) 20.0 °C Fan**, Intake and

(kgf·m)
N·m
lb·ft
314
(32)
220 294
TORQUE
100 210 (30)
275
(136) 200 (28)
190 255
(26)
180 235
90 170 (24)
(122)
kW(hp): SAE, Gross
kW(PS): JIS & DIN
80
(109)
70 SAE
(95)
DIN

OUTPUT
JIS
60
(82)
50
(68) lb/hp·h
(g/PS·h)
g/kW·h
40
(54)
0.45 272
30 B. S. F. C (200)
(41) 245
0.40 (180)
218
0.35 (160)
1400 1800 2200 2600 3000 3400

ENGINE SPEED (rpm)
FE85CGZ／FE85CHZ
2800
35%
GROSS WEIGHT 8000kg
TIRE SIZE 7.50-16-14
2400 30%
TIRE RADIUS 0.383m
1 T/M G/RATIO
R 1st 5.380
2200 2nd 3.028
3rd 1.700
25% 4th 1.000
2000
5th 0.722
Rev. 5.380
1800 FINAL G/RATIO 6.166
20% ×1000
1600 8
15%
1400 7
1200 6
2
ENGINE SPEED (rpm)
10%
1000 5
800 4
R1 2 3 5%
3 4 5
600 3
3%
400 4
2
5 0%
200 1
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120 130
CHASSIS LAYOUT
FE85CGZL
1995
1660
2135
840
1088 525 4985
3345
38
2220 (APPROX)
7.50-16-14PR
1665 1145 3870 1640 80
6735
FE85CHZL
1995
1660
2135
840
1088 525 5460

3645
38
2220 (APPROX)
7.50-16-14PR
1665 1145 4170 1815 80
7210
NOTE :
FE85C-Z SERIES OPTIONAL EQUIPMENT

CAB
INTERIOR
AM radio
AM/FM radio, stereo
Floor console Fitted between driver seat and passenger seat
Seat belts
EXTERIOR
INSTRUMENT
Air conditioner*
and defroster
Capacity: 1.0 kg
Fire extinguisher
CHASSIS
Fuel tank, spare 70 lits.(dm3) with key Adds to main fuel tank 100 lits. (dm3)
Heavy duty battery
Spare tire
Spare tire carrier
Standard tool set
Transmission P. T. O.
ENGINE
operation
* Engine idling up kit is mandatory, in case of installing air conditioner locally.
ANNOTATION
Spec. No. FG83, 1/9
1. Model of Chassis
MODEL FG83PC6 FG83PE6 FG83PE6W
(Double cab)
G.V.W.
5,500 (12,125)
kg (lb)
ENGINE
4D34-3A
(Model)
WHEELBASE
2,860 (112.6) 3,460 (136.2)
mm (in.)
ANNOTATION

MODEL FG83PE6W
FG83PC6 FG83PE6
TYPE (Double cab)
(1) (1) (1)

Cargo Truck ¡ ¡ ¡
ANNOTATION
Spec. No. FG83, 2/9

TYPE: FORWARD CONTROL, TILT CAB (EXCEPT DOUBLE CAB)
CANTER DRIVE SYSTEM: 4 x 4, CREW: 3…SINGLE CAB
DRIVE SYSTEM: 4 x 4, CREW: 7…DOUBLE CAB
FG83P SERIES ENGINE: 4D34-3A, DIESEL, 80 kW (109 PS)/3,200 rpm
G.V.W.: 5,500 kg (12,125 lb), TIRE: 7.50-16-10PR

R.H.D. FG83PC6R FG83PE6R FG83PE6WR
MODEL
L.H.D. FG83PC6L FG83PE6L FG83PE6WL
Dimensions mm (in.)
Wheelbase 2,860 (112.6) 3,460 (136.2) 3,460 (136.2)
Overall length 5,305 (208.9) 6,120 (240.9) 6,120 (240.9)
Overall width 2,035 ( 80.1) 2,035 ( 80.1) 2,035 ( 80.1)
Tread, front 1,665 ( 65.6) 1,665 ( 65.6) 1,665 ( 65.6)
Tread, rear 1,560 ( 61.4) 1,560 ( 61.4) 1,560 ( 61.4)
Cab to rear axle 2,320 ( 91.3) 2,920 (115.0) 1,920 ( 75.6)
Cab to end of frame 3,580 (140.9) 4,395 (173.0) 3,395 (133.7)
Frame width 750 ( 29.5) 750 ( 29.5) 750 ( 29.5)
Front overhang 1,130 ( 44.5) 1,130 ( 44.5) 1,130 ( 44.5)
Rear overhang 1,260 ( 49.6) 1,475 ( 58.1) 1,475 ( 58.1)
Weights kg (lb)
Kerb weight (1) 2,410 ( 5,315) 2,440 ( 5,380) 2,640 ( 5,820)
front 1,695 ( 3,735) 1,715 ( 3,780) 1,820 ( 4,010)
rear 715 ( 1,575) 725 ( 1,600) 820 ( 1,810)
Max. G. V. W. 5,500 (12,125) 5,500 (12,125) 5,500 (12,125)
front 2,500 ( 5,510) 2,500 ( 5,510) 2,500 ( 5,510)
rear 3,600 ( 7,935) 3,600 ( 7,935) 3,600 ( 7,935)
Max. speed km/h (mph) 107 (66.4) 107 (66.4) 107 (66.4)
60.0 60.0 60.0
ANNOTATION
1073 540 3580

2320
38
2435 (APPROX)
7.50-16-10PR
1130 2860 1260 55
5305
Spec. No. FG83, 3/9

SERIES FG83P
Clutch
Model C3W28
Transmission
Model M035S5
Type 5 forward and 1 reverse speed, 2nd to 5th synchromesh, 1st and Rev.constantmesh gears
Gear ratios 5.380-3.028-1.700-1.000-0.722, Rev. 5.380
Transfer
Model TF3
Type 2 speed, constantmesh gears
Gear ratios Low: 1.987, High: 1.090
Control Switch control vacuum assistant
Propeller Shaft
Model Front: P2, Rear: P3
FG83PC6: Tubular, forged steel ends
Type
FG83PE6/FG83PE6W: Tubular, forged steel ends with center bearing
Rear Axle
Model R030T
Model D3H
Ratio 6.166
Front Axle
Model F200TW
Type Full floating type with constant velocity universal joints
Model D1H
Ratio 6.166
Tread pattern Rib-Lug
Disc wheel size
16 x 6.00 GS-127-9t, 6 studs, 2 pieces
Steering System
Ball-nut type with integral type hydraulic power booster.
Type
Gear ratio 22.6 : 1
Service Brake
Parking Brake
Actuation Internal expanding type on propeller shaft at rear of transfer
Size
Spec. No. FG83, 4/9

SERIES FG83P
Suspensions
Springs
Type Semi–elliptic, laminated leaf springs
Rating, ground
10 mm-2 x 0.39 in.
Front 1,200 mm x 70 mm x 9 mm-2 ( 47.2 in. x 2.76 in. x 0.35 in. )
16 mm-1 x 0.63 in.
10 mm-1 0.39 in.
Main 1,250 mm x 70 mm x ( 49.2 in. x 2.76 in. x )
11 mm-5 0.43 in.
Rear
8 mm-4 0.31 in.
Helper 990 mm x 70 mm x ( 39.0 in. x 2.76 in. x )
9 mm-2 0.35 in.
Cooling System
Rows of tubes 2
Height x Width
Core size
525 mm x 518 mm (20.7 in. x 20.4 in.)
Ratio 1.27
Frame
Fuel System
Fuel tank 100 lits. (dm3) (22.0 Imp.gals. or 26.4 U.S.gals. )
Batteries 12 Volt x 2, 52 Ah (187 kC) at 5 hr rate (75D26L)
Turnsignal/Hazard 21W-2 : Amber
Tail 5W-2 : Red
Stop 21W-2 : Red
Instruments
Meters ¡Speedometer (km/h) with odometer and trip meter ¡Fuel gauge ¡Water temp.gauge (˚C)
Warning lamps and
¡High beam/passing ¡4WD ¡Alternator
indicators ¡Oil pressure/filter blockage
Spec. No. FG83, 5/9

SERIES FG83P
Cab
Mounting Fixed type, isolated 4 points (isolated 6 points for FG83PE6W)
Construction Tilt type with torsion bar, all steel welded construction (fixed cab for FG83PE6W)
Windshield wipers
Driver's seat
Passenger seat
Only for FG83PE6W. Low back type (spring and urethane
Rear seat
foam rubber cushioned), vinyl leather
¡2 access handles
¡Cup holder
¡2 combination switches ¡Grip, for cab tilt/down
¡Driver's sun visor
¡2 door switches (assistseat side)
¡Duplicate key of starter, ¡Insulator under cab floor
¡2 exterior rear view mirrors
fuel stop and door ¡Multi pocket
¡A4 document box
¡Engine idling control ¡Room lamp (10W x 1),
¡Access step, each side
Appointments button ¡Room lamp (10W + 10W,
¡Armrest (each door)
¡Floor vinyl mat only for FG83PE6W)
¡Ashtray (each door)
¡Forced ventilator ¡Ticket holder
¡Box with lid
¡Front emblem ¡Tray (instrument panel)
¡Card holder
"MITSUBISHI FUSO" &
¡Coat hook
"CANTER"
(except for FG83PE6W)
Measurement Metric
Spec. No. FG83, 6/9

CHASSIS MODEL FG83P
80 kW (109 PS) (JIS)
78 kW (106 PS) (DIN)
Max. Output
at 3,200 rpm (53.3 r/s) (1)
255 N·m (26.0 kgf·m, 188 lb·ft) (JIS)
251 N·m (25.6 kgf·m, 185 lb·ft) (DIN)
Max. Torque
240 N·m (24.5 kgf·m, 177 lb·ft) (SAE, Gross)
at 1,800 rpm (30.0 r/s)
Oil System
Fan P. P. blade
Fuel System
ANNOTATION
(1) Max. speed of 4D34–3A engine is 3,400 rpm (56.6 r/s).
REMARKS

Fan**, Intake and
DIN DIN 70020 760 mmHg (101.3 kPa) 20.0 °C

** 4D34-3A, 430 mm dia. 8 blade, P. P., fan ratio 1.27
Spec. No. FG83, 7/9
ENGINE PERFORMANCE CURVES VEHICLE PERFORMANCE CURVES
MITSUBISHI FUSO 4D34-3A DIESEL ENGINE FG83PC6／FG83PE6／FG83PE6W

4500
(kgf·m)
N·m
lb·ft
GROSS WEIGHT 5500kg
255 L1 TIRE SIZE 7.50-16-10
185 (26) 100%
3900
TORQUE
235 95% TIRE RADIUS 0.383m
175
(24) LR 90% T/M G/RATIO
165 216
(22) 3600 85% 1st 5.380
155
80 145 196 80% 2nd 3.028
(109) (20)
75% 3rd 1.700
3300 4th 1.000
kW(hp): SAE, Gross
70%
kW(PS): JIS & DIN
5th 0.722
70 65%

3000 Rev. 5.380
(95)
60% T/F G/RATIO
HIGH 1.090
55%
2700 LOW 1.987
60
(82) SAE FINAL G/RATIO 6.166
50% ×1000
DIN 2400 8
OUTPUT
45% 40%
JIS L2
50
(68) 2100 7
35%
H1
HR
1800 30% 6
ENGINE SPEED (rpm)

40
(54)
25%
(g/PS·h)
1500 5
g/kW·h
lb/hp·h
30 L3 20%
(41) 1200 H2 4
0.45 272 L5 H4 H5
(200) L1 L2 H1 H2 L4 15%
H3
B. S. F. C 0.40 245 L3
(180) 900 3
218 L4 10%
0.35 (160)
H3
600 2
1400 1800 2200 2600 3000 3200 3400 L5 5%
3%
ENGINE SPEED (rpm) H4
300 1
0%
H5
0 0
0 10 20 30 40 50 60 70 80 90 100 110 120
CHASSIS LAYOUT
FG83PC6L
1560
2035
1995
750
1073 540 3580

2320
38
2435 (APPROX)
7.50-16-10PR
1665 1130 2860 1260 55
5305
Spec. No. FG83, 8/9
CHASSIS LAYOUT
FG83PE6L
FG83PE6L
1995
1560
2035
750
1073 540 4395
2920
38
2435 (APPROX)
7.50-16-10PR
1665 1130 3460 1475 55
6120
FG83PE6WL
1995
1560
2035
750
1073 1540 3395

1920
28
2495 (APPROX)
7.50-16-10PR
1665 1130 3460 1475 55
6120
NOTE :
These drawings show left hand drive model. For right hand drive model, exterior rear view mirror and windsheld wiper on
Spec. No. FG83, 9/9
FG83P SERIES OPTIONAL EQUIPMENT

CAB
INTERIOR
AM radio
AM/FM radio, stereo
with digital clock and cassette player two speakers
Floor console Fitted between driver seat and passenger seat, not available for double cab
Floor mat Carpet type. Only for R.H.D model
Seat back tray and Tray on window side and center passenger seat back, console on back panel.
back panel console Not available for double cab
Seat belts
EXTERIOR
INSTRUMENT
Air conditioner
and defroster
Dual air conditioner Includes heater and defroster. Only for L.H.D. model of double cab
Capacity: 1.0 kg
Fire extinguisher
Power windows Driver and passenger side. Front windows only on double cab
CHASSIS
Exhaust brake Vacuum operated, butterfly valve type
Free-wheeling front hubs Manual setting for FREE-LOCK
Heavy duty battery
Main : 1,250 mm x 70 mm x 10 mm-1 (49.2 in. x 2.76 in. x 0.39 in. )
11 mm-5 0.43 in.
Heavy duty spring, rear Helper : 990 mm x 70 mm x 8 mm-5 (39.0 in. x 2.76 in. x 0.31 in. )
9 mm-2 0.35 in.
Limited slip differential Multi plate type, on rear axle
Spare tire
Spare tire carrier
Standard tool set
Tool box Fitted to side frame (Not available for FG83PC)
Tool box with padlock Fitted to side frame (Not available for FG83PC)
Output capacity: 147 N·m (15 kg·f,108 Ib·ft) /2,000 rpm (33.3 r/s)
Transmission P.T.O.
ENGINE
operation
ANNOTATION
2. CARGO & DUMP TRUCK
CARGO DUMP
Drop
Drop Drop Scoop
Wooden Steel Side &
Max. Tail Tail-U End
Tail
SERIES MODEL G.V.W.
ton
CA CS DA DB DC DD
Payload Body Capacity

kg cu.m
FB FB71AB8 3.5 1,570 — — — — —
FE71PB8 4.4 2,210 — — — — —
FE71PBD4 4.7 — — — 1.6 — —
FE73PB6 3,305 — — — — —
5.7
FE73PE6 3,160 — — — — —
FE83PC6 3,420 — — — — —
FE83PCD6 — — — 1.7 — —
6.0
FE83PE6 3,320 — — — — —
FE FE83PE6W 2,925 — — — — —
FE84PC6 3,850 — — — — —
6.5
FE84PE6 3,750 — — — — —
FE85PC6 4,400 — — — — —
FE85PE6 7.2 4,290 — — — — —
FE85PG6 4,220 — — — — —
FE85CGZ 4,895 — — — — —
8.0
FE85CHZ 4,825 — — — — —
FG83PC6 2,555 — — — — —
FG FG83PE6 5.5 2,465 — — — — —
FG83PE6W 2,065 — — — — —
Spec. No. FB71-C, 1/2
MITSUBISHI FUSO CARGO TRUCK

DRIVE SYSTEM:: 4 x 2, CREW: 3
ENGINE: 4M40-0A, DIESEL, 69 kW (94 PS)/4,000 rpm
FB71A SERIES G. V. W.: 3,500 kg (7,715 lb), TIRE: 7.00-15- 6PR (Front)
G. V. W.: 3,500 kg (7,715 lb), TIRE: 7.00-15-10PR (Rear)
1695mm
O.W.
B.W.
T.R.
T.F.
B.L.
O.S.
B.H.
H.
F.O.H. W.B. R.O.H.

O.A.L.
DIMENSIONS, WEIGHTS AND PERFORMANCE

R.H.D. FB71AB8R
MODEL
L.H.D. FB71AB8L
BODY TYPE Wooden cargo
PAYLOAD CAPACITY kg (Ib) 1,570 (3,460)
BODY CODE CA
Dimensions mm (in.)
Wheelbase (W.B.) 2,500 ( 98.4 )
Overall length (O.A.L.) 4,695 (184.8)
Overall width (O.W.) 1,695 ( 66.7 )
Overall height, approx. (H.) 2,000 ( 78.7 )
Tread, front (T.F.) 1,405 ( 55.3 )
Tread, rear (T.R.) 1,360 ( 53.5 )
Front overhang (F.O.H.) 1,000 ( 39.4 )
Rear overhang (R.O.H.) 1,170 ( 46.1 )
Body inside length (B.L.) 3,050 (120.1)
Body inside width (B.W.) 1,615 ( 63.6 )
Body inside height (B.H.) 380 ( 15.0 )
Body offset (O.S.) 365 ( 14.4 )
Shipping space, approx. cu.m (cu.ft.) 16.0 ( 565 )
Weights kg (lb)
Empty vehicle weight 1,735 (3,825)
front 1,150 (2,535)
rear 585 (1,290)
Max. G. V. W. 3,500 (7,715)
front 1,680 (3,705)
rear 2,160 (4,760)
Max. speed km/h (mph) 120 ( 74.6 )
36.0
Min. turning radius m (ft) 5.0 ( 16.4)
ANNOTATIONS
(1) Empty vehicle weight shown are subject to 2.5% variation to allow for production tolerances.
(2) Empty vehicle weight includes weight of oil, fuel, coolant but exclude spare tire carrier & bracket, spare tire & disc wheel
and standard tool set.
(3) Above drawings show left hand drive model. For right hand drive model, exterior rear view mirror and wiper on left and
right sides are symmetric with respect to the chassis center line.
(4) Three persons are excluded as payload capacity. One person’s weight is calculated by 65 kg.
Spec. No. FB71-C, 2/2
FB71A SERIES CARGO BODY SPECIFICATIONS

Floor
Cross sill height x width Plywood 72 mm x 40 mm or 35 mm (2.83 in. x 1.57 in. or 1.38 in.)
Floor board thickness Plywood 14 mm (0.55 in.)
Floor frame Form-rolled steel 2.3 mm (0.09 in.)
Guard Frame
Outside post thickness Form-rolled steel 2.3 mm (0.09 in.)
Upper rail thickness Bended steel 2.3 mm (0.09 in.)
Horizontal rail thickness Bended steel 2.3 mm (0.09 in.)
Vertical pillar thickness Bended steel 1.4 mm (0.06 in.)
Header panel thickness Plywood 11 mm (0.43 in.)
Side & Rear Gate
Top rail thickness Form-rolled steel 1.8 mm (0.07 in.)
Side post thickness Pressed steel 1.6 mm (0.06 in.)
Bottom rail thickness Form-rolled steel 1.6 mm (0.06 in.)
Board & panel thickness Plywood overlaid with steel metal 11.3 mm (0.44 in.)
Accessories
Rope hook diameter Steel rod 12.7 mmφ (Dia. 0.50 in.)
Rear fender thickness Plastic (P.P.) 3.0 mm (0.12 in.)
Side gate support 1 pair
FB71A SERIES CHASSIS SPECIFICATIONS

Engine
Model MITSUBISHI FUSO 4M40-0A
Type 4 stroke-cycle, water-cooled diesel engine with swirl chamber
No. of cylinders 4 in line
Bore x stroke 95 mm x 100 mm (3.74 in. x 3.94 in.)
Piston displacement 2.835 L (173.1 cu.in.)
Max. output (JIS) 69 kW (94 PS) / 4,000 rpm
Max. torque (JIS) 191 N·m (19.5 kgf·m, 141 lb·ft) / 2,000 rpm
Alternator 12 Volt, AC, 75 Amp.
Air cleaner Dry paper element type with snorkel
Clutch Hydraulic control, diaphragm spring, single dry plate
Facing material, diameter Woven (asbestos free), 260 mm (10.2 in.)
Transmission
Model M015S5
Type 5 forward and 1 reverse speed,
1st to 5th synchromesh, Rev. constantmesh gears
Gear ratios 4.733-2.753-1.490-1.000-0.839, Rev. 4.733
Front Axle Reverse Elliot, "Ι" beam
Rear Axle Full floating type
Model D1H
Ratio 5.285
Tire size 7.00-15-6PR front, 7.00-15-10PR rear
Tread pattern Rib
Disc wheel size 15 x 5.50F-25-4.5t, 6 studs, 2 pieces
Steering Ball-nut type. Telescopic and tilt steering column with steering lock
Suspensions
Semi-elliptic, laminated leaf springs
span x width x thickness
Front
Rear
–No. of leaves 1,200 mm x 70 mm x
9 mm-2 (
10 mm-2 (
47.2 in. x 2.76 in. x
)
0.35 in.)
0.39 in.)
1
span x width x thickness 11 mm-2 ( 0.43 in.)
Main
1 –No. of leaves
1,200 mm x 70 mm x
18 mm-1 (
47.2 in. x 2.76 in. x )
0.71 in.)
Helper 95 mm x 65 mm x 85 mm (3.74 in. x 2.56 in. x 3.35 in.) (Rubber)
Brakes
Service Hydraulic with vacuum servo assistance, dual circuit
Parking Internal expanding type on propeller shaft at rear of transmission
Frame Parallel, tapered channel section with reinforcement and crossmembers
12 Volt x 1, 110 Ah (396 kC) at 20 hr rate (115E41L)
Battery
88 Ah (317 kC) at 5 hr rate (115E41L)
Fuel Tank 70 lits. (dm3) (15.4 lmp.gals. or 18.5 U.S.gals.)
ANNOTATION
Spec. No. FE71-C, 1/2

ENGINE: 4D34-3A, DIESEL, 80 kW (109PS)/3,200 rpm
1695mm
O.W.
B.W.
T.R.
T.F.
B.L.
O.S.
B.H.
H.
F.O.H. W.B. R.O.H.

O.A.L.

R.H.D. FE71PB8R
MODEL
L.H.D. FE71PB8L
BODY CODE CA
Dimensions mm (in.)
Wheelbase (W.B.) 2,500 ( 98.4)
Overall length (O.A.L.) 4,695 ( 184.8)
Overall width (O.W.) 1,695 ( 66.7)
Overall height, approx. (H.) 2,000 ( 78.7)
Tread, front (T.F.) 1,390 ( 54.7)
Tread, rear (T.R.) 1,380 ( 54.3)
Front overhang (F.O.H.) 1,000 ( 39.4)
Rear overhang (R.O.H.) 1,170 ( 46.1)
Body inside length (B.L.) 3,050 ( 120.1)
Body inside width (B.W.) 1,615 ( 63.6)
Body inside height (B.H.) 1,380 ( 15.0)
Body offset (O.S.) 1,365 ( 14.4)
Shipping space, approx. cu.m (cu.ft.) 116.0 ( 565)
Weights kg (lb)
Empty vehicle weight 1,995 ( 4,400)
front 1,315 ( 2,900)
rear 1,680 ( 1,500)
Max. G. V. W. 4,400 ( 9,700)
front 2,000 ( 4,410)
rear 2,560 ( 5,645)
47.0
ANNOTATIONS
FE71P SERIES CARGO BODY SPECIFICATIONS

Floor
Main sill height x width x thickness Steel pipe 90 mm x 40 mm x 2.3 mm (3.54 in. x 1.57 in. x 0.09 in.)
Guard Frame
Outside post thickness Form-rolled steel 2.3 mm (0.09 in.)
Side & Rear Gate
Accessories
Rear fender thickness Plastic (P.P.) 3.0 mm(0.12 in.)
FE71P SERIES CHASSIS SPECIFICATIONS

Engine
Model MITSUBISHI FUSO 4D34-3A
Transmission
Model M025S5
5 forward and 1 reverse speed,
Type
Gear ratios 5.181-2.865-1.593-1.000-0.739, Rev. 5.181
Model D2H
Ratio 5.714
Tread pattern Rib
Disc wheel size 15 x 5.50F-50-4.5t, 6 studs, 2 pieces
Suspensions
Front
Rear
10 mm-2 (
11 mm-2 (
47.2 in. x 2.76 in. x
0.43 in.)
0.39 in.)
Main
Helper
–No. of leaves
1,250 mm x 70 mm x 10 mm-1
(
11 mm-2 49.2 in. x 2.76 in. x 0.43 in.
49.2 in. x 2.76 in. x 0.39 in.
18 mm-1 49.2 in. x 2.76 in. x 0.71 in.
100 mm x 70 mm x 85 mm (3.9 in. x 2.76 in. x 3.35 in.) (Rubber)
)
Brakes
Batteries
52 Ah (187 kC) at 5 hr rate (75D26L)
ANNOTATION

ENGINE: 4D34-3A, DIESEL, 80 kW (109PS)/3,200 rpm
1695mm
O.W.
B.W.
T.R.
T.F.
B.L.
O.S.
B.H.
H.
F.O.H. W.B. R.O.H.

O.A.L.

R.H.D. FE73PB6R FE73PE6R
MODEL
L.H.D. FE73PB6L FE73PE6L
PAYLOAD CAPACITY kg (Ib) 3,305 (7,285) 3,160 (6,965)
BODY CODE CA
Dimensions mm (in.)
Wheelbase (W.B.) 2,500 ( 98.4) 3,350 ( 131.9)
Overall length (O.A.L.) 4,765 ( 187.6) 5,995 ( 236.0)
Overall width (O.W.) 1,890 ( 74.4) 1,890 ( 74.4)
Overall height, approx. (H.) 2,050 ( 80.7) 2,050 ( 80.7)
Tread, front (T.F.) 1,390 ( 54.7) 1,390 ( 54.7)
Tread, rear (T.R.) 1,435 ( 56.5) 1,435 ( 56.5)
Front overhang (F.O.H.) 1,000 ( 39.4) 1,000 ( 39.4)
Rear overhang (R.O.H.) 1,235 ( 48.6) 1,620 ( 63.8)
Body inside length (B.L.) 3,120 ( 122.8) 4,350 ( 171.3)
Body inside width (B.W.) 1,790 ( 70.5) 1,790 ( 70.5)
Body inside height (B.H.) 380 ( 15.0) 380 ( 15.0)
Body offset (O.S.) 340 ( 13.4) 575 ( 22.6)
Shipping space, approx. cu.m (cu.ft.) 18.5 ( 653) 23.5 ( 830)
Weights kg (lb)
Empty vehicle weight 2,200 ( 4,850) 2,345 ( 5,170)
front 1,355 ( 2,985) 1,440 ( 3,175)
rear 845 ( 1,865) 905 ( 1,995)
Max. G. V. W. 5,700 (12,565) 5,700 (12,565)
front 2,260 ( 4,980) 2,260 ( 4,980)
rear 4,100 ( 9,040) 4,100 ( 9,040)
Max. speed km/h (mph) 110 (68.4) 110 (68.4)
37.5 37.5
ANNOTATIONS

FE73PB6 FE73PE6
Floor
Floor board thickness Plywood 14 mm(0.55 in.)
Floor frame Form-rolled steel 2.3 mm(0.09 in.)
Guard Frame
Outside post thickness Pressed steel 3.2 mm (0.13 in.)
Side & Rear Gate
Accessories
Rear fender thickness Plastic (P.P.) 3.0 mm(0.12 in.)

Engine
Transmission
Model M025S5
Type 5 forward and 1 reverse speed,
Gear ratios 5.181-2.865-1.593-1.000-0.739, Rev. 5.181
Model D2H
Ratio 6.166
Tread pattern Rib
Disc wheel size 16 x 5.50F-115-8t, 5 studs, 2 pieces
Suspensions
span x width x thickness Semi-elliptic, laminated leaf springs
Front 1,200 mm x 70 mm x 10 mm-5 (47.2 in. x 2.76 in. x 0.39 in.)
–No. of leaves
Rear Semi-elliptic, laminated leaf springs
Main
11 mm-4
10 mm-1 (49.2 in. x 2.76 in. x
0.39 in.)
0.43 in.)
Helper 990 mm x 70 mm x 8 mm-4 (39.0 in. x 2.76 in. x 0.31 in.)

Brakes
Batteries
52 Ah (187 kC) at 5 hr rate (75D26L)
Fuel Tank 70 lits. (dm3) (15.4 lmp.gals. or 18.5 U.S.gals.) 100 lits. (dm3) (22.0 lmp.gals. or 26.4 U.S.gals.)
ANNOTATION

1995mm
O.W.
B.W.
T.R.
T.F.
B.L.
O.S.
B.H.
H.
F.O.H. W.B. R.O.H.

O.A.L.

MODEL
BODY CODE CA
Dimensions mm (in.)
Wheelbase (W.B.) 2,750 ( 108.3) 3,350 ( 131.9)
Overall width (O.W.) 2,080 ( 81.9) 2,080 ( 81.9)
Tread, front (T.F.) 1,655 ( 65.2) 1,655 ( 65.2)
Tread, rear (T.R.) 1,495 ( 58.9) 1,495 ( 58.9)
Body offset (O.S.) 355 ( 14.0) 525 ( 20.7)
Shipping space, approx. cu.m (cu.ft.) 24.5 ( 865) 28.5 ( 1,006)
Weights kg (lb)
front 1,505 ( 3,320) 1,555 ( 3,430)
rear 880 ( 1,940) 930 ( 2,050)
Max. G. V. W. 6,000 (13,230) 6,000 (13,230)
front 2,260 ( 4,980) 2,260 ( 4,980)
rear 4,200 ( 9,260) 4,200 ( 9,260)
Max. speed km/h (mph) 110 (68.4) 110 (68.4)
Max. gradeability (tan θ ) % 35.0 35.0
ANNOTATIONS
(4) Above drawings show FE83PE6L.

Floor
Guard Frame
Side & Rear Gate
Accessories

Engine
Transmission
Model M025S5
Type
Gear ratios 5.181-2.865-1.593-1.000-0.739, Rev. 5.181
Model D2H
Ratio 6.166
Tread pattern Rib
Suspensions
Front
–No. of leaves 1,200 mm x 70 mm x 10 mm-5 (47.2 in. x 2.76 in. x 0.39 in.)
Main
Helper
–No. of leaves
1,250 mm x 70 mm x
11 mm-4
10 mm-1 ( 49.2 in. x 2.76 in. x

0.43 in.
0.39 in. )
Brakes
Batteries
52 Ah (187 kC) at 5 hr rate (75D26L)
ANNOTATION
Spec. No. FE83W-C, 1/2

CANTER TYPE: FORWARD CONTROL, FIXED DOUBLE CAB
FE83P-W SERIES G.V.W.: 6,000 kg (13,230 lb), TIRE: 7.00-16-12PR
1995mm
O.W.
B.W.
T.R.
T.F.
B.L.
O.S.
B.H.
H.
F.O.H. W.B. R.O.H.

O.A.L.

R.H.D. FE83PE6WR
MODEL
L.H.D. FE83PE6WL
BODY CODE CA
Dimensions mm (in.)
Wheelbase (W.B.) 3,350 ( 131.9)
Tread, front (T.F.) 1,655 ( 65.2)
Tread, rear (T.R.) 1,495 ( 58.9)
Body inside height (B.H.) 380 ( 15.0)
Body offset (O.S.) 50 ( 2.0)
Weights kg (lb)
front 1,595 ( 3,515)
rear 1,025 ( 2,260)
Max. G. V. W. 6,000 (13,230)
front 2,260 ( 4,980)
rear 4,200 ( 9,260)
35.0
ANNOTATIONS
Spec. No. FE83W-C, 2/2
FE83P-W SERIES CARGO BODY SPECIFICATIONS

Floor
Guard Frame
Side & Rear Gate
Accessories
FE83P-W SERIES CHASSIS SPECIFICATIONS

Engine
Transmission
Model M025S5
Type
Gear ratios 5.181-2.865-1.593-1.000-0.739, Rev. 5.181
Model D2H
Ratio 6.166
Tread pattern Rib
Suspensions
Front
Main
Helper
–No. of leaves
1,250 mm x 70 mm x
11 mm-4
10 mm-1 (
49.2 in. x 2.76 in. x
0.43 in.
0.39 in.
)
Brakes
Batteries
52 Ah (187 kC) at 5 hr rate (75D26L)
Fuel Tank 100 lits. (dm3) (22.0. lmp.gals. or 26.4 U.S.gals.)
ANNOTATION

1995mm
O.W.
B.W.
T.R.
T.F.
B.L.
O.S.
B.H.
H.
F.O.H. W.B. R.O.H.

O.A.L.

MODEL
BODY CODE CA
Dimensions mm (in.)
Wheelbase (W.B.) 2,750 ( 108.3) 3,350 ( 131.9)
Overall width (O.W.) 2,080 ( 81.9) 2,080 ( 81.9)
Tread, front (T.F.) 1,665 ( 65.6) 1,665 ( 65.6)
Tread, rear (T.R.) 1,495 ( 58.9) 1,495 ( 58.9)
Body offset (O.S.) 355 ( 14.0) 525 ( 20.7)
Weights kg (lb)
front 1,525 ( 3,360) 1,565 ( 3,450)
rear 930 ( 2,050) 990 ( 2,185)
Max. G. V. W. 6,500 (14,330) 6,500 (14,330)
front 2,400 ( 5,290) 2,400 ( 5,290)
rear 4,500 ( 9,920) 4,500 ( 9,920)
Max. speed km/h (mph) 110 (68.4) 110 (68.4)
32.0 32.0
ANNOTATIONS

Floor
Guard Frame
Side & Rear Gate
Accessories

Engine
Transmission
Model M025S5
Type
Gear ratios 5.181-2.865-1.593-1.000-0.739, Rev. 5.181
Model D2H
Ratio 6.166
Tread pattern Rib
Suspensions
Front
span x width x thickness 10 mm-1 0.39 in.
Main
–No. of leaves
1,250 mm x 70 mm x
11 mm-5 (
49.2 in. x 2.76 in. x
0.43 in. )
8 mm-4 0.31 in.
Helper 990 mm x 70 mm x
9 mm-2 (
39.0 in. x 2.76 in. x
0.35 in. )
Brakes
Exhaust Vacuum operated, butterfly valve type
Batteries
52 Ah (187 kC) at 5 hr rate (75D26L)
ANNOTATION
Spec. No. FE85P-C, 1/2

1995mm
O.W.
B.W.
T.R.
T.F.
B.L.
O.S.
B.H.
H.
F.O.H. W.B. R.O.H.

O.A.L.

R.H.D. FE85PC6R FE85PE6R FE85PG6R
MODEL
L.H.D. FE85PC6L FE85PE6L FE85PG6L
PAYLOAD CAPACITY kg (Ib) 4,400 (9,700) 4,290 (9,460) 4,220 (9,305)
BODY CODE CA
Dimensions mm (in.)
Wheelbase (W.B.) 2,750 ( 108.3) 3,350 ( 131.9) 3,850 ( 151.6)
Overall length (O.A.L.) 5,340 ( 210.2) 6,190 ( 243.7) 6,895 ( 271.5)
Overall width (O.W.) 2,080 ( 81.9) 2,080 ( 81.9) 2,080 ( 81.9)
Overall height, approx. (H.) 2,205 ( 86.8) 2,205 ( 86.8) 2,205 ( 86.8)
Tread, front (T.F.) 1,665 ( 65.6) 1,665 ( 65.6) 1,665 ( 65.6)
Tread, rear (T.R.) 1,560 ( 61.4) 1,560 ( 61.4) 1,560 ( 61.4)
Front overhang (F.O.H.) 1,145 ( 45.1) 1,145 ( 45.1) 1,145 ( 45.1)
Rear overhang (R.O.H.) 1,415 ( 55.7) 1,670 ( 65.7) 1,870 ( 73.6)
Body inside length (B.L.) 3,500 ( 137.8) 4,350 ( 171.3) 5,000 ( 196.9)
Body inside width (B.W.) 1,980 ( 78.0) 1,980 ( 78.0) 1,980 ( 78.0)
Body inside height (B.H.) 380 ( 15.0) 380 ( 15.0) 380 ( 15.0)
Body offset (O.S.) 355 ( 14.0) 525 ( 20.7) 650 ( 25.6)
Shipping space, approx. cu.m (cu.ft.) 24.5 ( 865) 28.5 ( 1,006) 32.0 ( 1,130)
Weights kg (lb)
Empty vehicle weight 2,605 ( 5,745) 2,715 ( 5,985) 2,785 ( 6,140)
front 1,585 ( 3,495) 1,630 ( 3,595) 1,650 ( 3,640)
rear 1,020 ( 2,250) 1,085 ( 2,390) 1,135 ( 2,500)
Max. G. V. W. 7,200 (15,875) 7,200 (15,875) 7,200 (15,875)
front 2,660 ( 5,865) 2,660 ( 5,865) 2,660 ( 5,865)
rear 5,060 (11,155) 5,060 (11,155) 5,060 (11,155)
Max. speed km/h (mph) 110 (68.4) 110 (68.4) 110 (68.4)
33.0 33.0 33.0
ANNOTATIONS
Spec. No. FE85P-C, 2/2

Floor
Guard Frame
Side & Rear Gate
Accessories

Engine
Transmission
Model M035S5
Type
2nd to 5th synchromesh, 1st and Rev. constantmesh gears
Gear ratios 5.380-3.028-1.700-1.000-0.722, Rev. 5.380
Front Axle Reverse Elliot, "I" beam
Model D035H
Ratio 6.166
Tread pattern Rib
Disc wheel size 16 x 6.00GS-127-9t, 6 studs, 2 pieces
Suspensions
Front
Main
–No. of leaves
1,250 mm x 70 mm x
11 mm-5 (
49.2 in. x 2.76 in. x
0.43 in. )
9 mm-2 0.35 in.
Helper
Brakes
(
990 mm x 70 mm x 10 mm-4 39.0 in. x 2.76 in. x 0.39 in.
9 mm-1 0.35 in. )
Batteries
52 Ah (187 kC) at 5 hr rate (75D26L)
ANNOTATION
Spec. No. FE85C-C, 1/2

FE85C-Z SERIES G.V.W.: 8,000 kg (17,635 lb), TIRE: 7.50-16-14PR
1995mm
O.W.
B.W.
T.R.
T.F.
B.L.
O.S.
B.H.
H.
F.O.H. W.B. R.O.H.

O.A.L.

R.H.D. FE85CGZR FE85CHZR
MODEL
L.H.D. FE85CGZL FE85CHZL
BODY CODE CA
Dimensions mm (in.)
Wheelbase (W.B.) 3,870 ( 152.4) 4,170 ( 164.2)
Overall width (O.W.) 2,180 ( 85.8) 2,180 ( 85.8)
Tread, front (T.F.) 1,665 ( 65.6) 1,665 ( 65.6)
Tread, rear (T.R.) 1,660 ( 65.4) 1,660 ( 65.4)
Body offset (O.S.) 670 ( 26.4) 745 ( 29.3)
Shipping space, approx. cu.m (cu.ft.) 32.5 ( 1,148) 34.5 ( 1,218)
Weights kg (lb)
front 1,700 ( 3,750) 1,730 ( 3,815)
rear 1,210 ( 2,670) 1,250 ( 2,755)
Max. G. V. W. 8,000 (17,635) 8,000 (17,635)
front 3,020 ( 6,660) 3,020 ( 6,660)
rear 5,760 (12,700) 5,760 (12,700)
Max. speed km/h (mph) 110 (68.4) 110 (68.4)
31.0 31.0
ANNOTATIONS
(4) Above drawings show FE85CGZL.
Spec. No. FE85C-C, 2/2
FE85C-Z SERIES CARGO BODY SPECIFICATIONS

Floor
Guard Frame
Side & Rear Gate
Accessories
FE85C-Z SERIES CHASSIS SPECIFICATIONS

Engine
Transmission
Model M035S5
Type
Gear ratios 5.380-3.028-1.700-1.000-0.722, Rev. 5.380
Model D040H
Ratio 6.166
Tread pattern Rib
Steering Telescopic and tilt steering column with steering lock
Suspensions
Front
Main
Main span x width x thickness
–No. of leaves
–No. of leaves
1,300
11mm
mm-2
11 mm-1
x 70 mm x 14 mm-2 51.2
(
0.43in.
0.43 in.
in.x 2.76 in. x 0.55 in.
1,300 mm x 70 mm x 11 mm-1 51.2 in. x 2.76 in. x 0.43 in.
14 mm-2
910
mm-2
0.55 in.
0.350.39
in. in.
)
( )
mm-1
Helper 990
900 mm
mm xx 70
70 mm 12 mm-4
mm xx 10 mm-1 39.0
35.4 in. x 2.76
2.76 in. 0.47in.
in. xx 0.39 in.
13 mm-1 0.51 in.
911
mm-1
mm-2 0.350.43
in. in.
Brakes
Service Hydraulic with oil servo assistance, dual circuit
Frame Ladder type, channel section with crossmembers
Batteries
52 Ah (187 kC) at 5 hr rate (75D26L)
ANNOTATION
Spec. No. FG83-C, 1/2

FG83P SERIES G.V.W.: 5,500 kg (12,125 lb), TIRE: 7.50-16-10PR
1995mm
O.W.
B.W.
T.R.
T.F.
B.L.
O.S.
B.H.
H.
F.O.H. W.B. R.O.H.

O.A.L.

R.H.D. FG83PC6R FG83PE6R
MODEL
L.H.D. FG83PC6L FG83PE6L
BODY CODE CA
Dimensions mm (in.)
Wheelbase (W.B.) 2,860 ( 112.6) 3,460 ( 136.2)
Overall width (O.W.) 2,080 ( 81.9) 2,080 ( 81.9)
Tread, front (T.F.) 1,665 ( 65.6) 1,665 ( 65.6)
Tread, rear (T.R.) 1,560 ( 61.4) 1,560 ( 61.4)
Body offset (O.S.) 415 ( 16.3) 590 ( 23.2)
Weights kg (lb)
front 1,730 ( 3,815) 1,790 ( 3,945)
rear 1,020 ( 2,250) 1,050 ( 2,315)
Max. G. V. W. 5,500 (12,125) 5,500 (12,125)
front 2,500 ( 5,510) 2,500 ( 5,510)
rear 3,600 ( 7,935) 3,600 ( 7,935)
Max. speed km/h (mph) 107 (66.5) 107 (66.5)
60.0 60.0
ANNOTATIONS
(4) Above drawings show FG83PE6L.
Spec. No. FG83-C, 2/2
FG83P SERIES CARGO BODY SPECIFICATIONS

Floor
Cross skill height x width Plywood 93 mm x 40 mm or 35 mm (3.66 in. x 1.57 in. or 1.38 in.)
Guard Frame
Side & Rear Gate
Accessories
FG83P SERIES CHASSIS SPECIFICATIONS

Engine
Transmission
Model M035S5
Type
Gear ratios 5.380-3.028-1.700-1.000-0.722, Rev. 5.380
Transfer Ratio Low : 1.987, High : 1.090
Front Axle Full floating type with constant velocity universal joints
Model D3H
Ratio 6.166
Steering Telescopic and tilt steering column with steering lock
Suspensions Semi-elliptic, laminated leaf springs
( )
10 mm-2 0.39 in.
Front 1,200 mm x 70 mm x 9 mm-2 47.2 in. x 2.76 in. x 0.35 in.
–No. of leaves
16 mm-1 0.63 in.
Main
–No. of leaves
1,250 mm x 70 mm x
10 mm-1
11 mm-5 (49.2 in. x 2.76 in. x
0.43 in.)
0.39 in.)
Helper
Brakes
990 mm x 70 mm x
8 mm-4
9 mm-2 (39.0 in. x 2.76 in. x
0.35 in.)
0.31 in.)

Parking Internal expanding type on propeller shaft at rear of transfer
Batteries 12 Volt x 2, 65 Ah (234 kC) at 20 hr rate (75D26L)
52 Ah (187 kC) at 5 hr rate (75D26L)
ANNOTATION
Spec. No. FG83W-C, 1/2

CANTER TYPE: FORWARD CONTROL, FIXED DOUBLE CAB
FG83P-W SERIES G.V.W.: 5,500 kg (12,125 lb), TIRE: 7.50-16-10PR
1995mm
O.W.
B.W.
T.R.
T.F.
B.L.
O.S.
H.
B.H.
F.O.H. W.B. R.O.H.

O.A.L.

R.H.D. FG83PE6WR
MODEL
L.H.D. FG83PE6WL
BODY CODE CA
Dimensions mm (in.)
Wheelbase (W.B.) 3,460 ( 136.2)
Tread, front (T.F.) 1,665 ( 65.6)
Tread, rear (T.R.) 1,560 ( 61.4)
Shipping space, approx. cu.m (cu.ft.) 32.5 ( 1,148)
Weights kg (lb)
front 1,830 ( 4,035)
rear 1,150 ( 2,535)
Max. G. V. W. 5,500 (12,125)
front 2,500 ( 5,510)
rear 3,600 ( 7,935)
60.0
ANNOTATIONS
Spec. No. FG83W-C, 2/2
FG83P-W SERIES CARGO BODY SPECIFICATIONS

Floor
Cross skill height x width Plywood 93 mm x 40 mm or 35 mm (3.66 in. x 1.57 in. or 1.38 in.)
Guard Frame
Side & Rear Gate
Accessories
FG83P-W SERIES CHASSIS SPECIFICATIONS

Engine
Transmission
Model M035S5
Type
Gear ratios 5.380-3.028-1.700-1.000-0.722, Rev. 5.380
Transfer Ratio Low : 1.987, High : 1.090
Front Axle Full floating type with constant velocity universal joints
Model D3H
Ratio 6.166
Steering
Suspensions Semi-elliptic, laminated leaf springs
10 mm-2 0.39 in.
Front
Rear
–No. of leaves 16 mm-1 (

0.63 in.)
Main
10 mm-1 (
11 mm-5 ( 49.2 in. x 2.76 in. x
0.43 in.)
0.39 in.)
Helper
Brakes
990 mm x 70 mm x
8 mm-4 (
9 mm-2 ( 39.0 in. x 2.76 in. x
0.35 in.)
0.31 in.)

Parking Internal expanding type on propeller shaft at rear of transfer
Batteries
52 Ah (187 kC) at 5 hr rate (75D26L)
ANNOTATION
Spec. No. FE71-D, 1/2
MITSUBISHI FUSO DUMP TRUCK

FE71PBD4 SERIES G.V.W.: 4,700 kg (10,360 lb), TIRE: 6.50-16-10PR
(1690)
O.W.
B.W.
T.F.
B.L.
60˚
O.S.
B.H.
H.
F.O.H. W.B. R.O.H. T.R.
O.A.L.

R.H.D. FE71PBD4R
MODEL
L.H.D. FE71PBD4L
BODY TYPE Drop side & tail
BODY CAPACITY cu.m (cu.yd) 1.6 (2.1)
BODY CODE DB
Dimensions mm (in.)
Wheelbase (W.B.) 2,500 ( 98.4)
Tread, front (T.F.) 1,390 ( 54.7)
Tread, rear (T.R.) 1,235 ( 48.6)
Weights kg (lb)
front 1,385 ( 3,055)
rear 1,070 ( 2,360)
Max. G. V. W. 4,700 (10,360)
front 2,000 ( 4,410)
rear 3,300 ( 7,275)
49.0
ANNOTATIONS
(2) Empty vehicle weight includes weight of oil, fuel, coolant but exclude spare tire carrier and bracket, spare tire & disc wheel
1and standard tool set.
1right sides are symmetric with respect to the chassis center line.
FE71PBD4 SERIES DUMP BODY SPECIFICATIONS

Body
Floor thickness 3.2 mm (0.13 in.)
Front panel thickness 2.3 mm (0.09 in.)
Side panel thickness 3.2 mm (0.13 in.)
Tail panel thickness 3.2 mm (0.13 in.)
Type of Tipping Gear Under body, hydraulic cylinder with link mechanism
Pump
Type Gear type (KPC-25)
Capacity 24.8 cc/rev (1.52 cu.in./rev)
Hoist
Type Single piston type with link
Tipping Performance
Angle of tip (approx.) 60 degree
Lifting time (approx.) 20 sec.
Lowering time (approx.) 20 sec.
FE71PBD4 SERIES CHASSIS SPECIFICATIONS

Engine
Piston displacement 3.907L (238.4 cu.in.)
Max. torque (JIS) 255 N·m (26.0 kgf·m / 188 lb·ft)
Facing material Woven (asbestos free), 275 mm (10.8 in.)
Transmission
Model M025S5
Type
Gear ratios 5.181-2.865-1.593-1.000-0.739, Rev. 5.181
Model D2H
Ratio 6.166
Tread pattern Lug
Suspensions
Front
Rear
10 mm-1 (
11 mm-3 (
47.2 in. x 2.76 in. x
0.39 in.)
0.43 in. )
12 mm-3 0.47 in.
Main
Helper
–No. of leaves
18 mm-1 (
0.71 in.
120 mm x 68 mm x 122 mm (4.72 in. x 2.68 in. x 4.8 in.) (Rubber)
)
Brakes
Batteries
52 Ah (187 kC) at 5 hr rate (75D26L)
ANNOTATION
MITSUBISHI FUSO DUMP TRUCK

FE83PCD6 SERIES G.V.W.: 6,000 kg (13,230 lb), TIRE: 7.00-16-12PR
(1990)
O.W.
B.W.
T.F.
B.L.
O.S.
55˚
B.H.
H.
F.O.H. W.B. R.O.H. T.R.
O.A.L.

R.H.D. FE83PCD6R
MODEL
L.H.D. FE83PCD6L
BODY CAPACITY cu.m (cu.yd) 1.7 (2.2)
BODY CODE DB
Dimensions mm (in.)
Wheelbase (W.B.) 2,750 ( 108.3)
Tread, front (T.F.) 1,655 ( 65.2)
Tread, rear (T.R.) 1,495 ( 58.9)
Weights kg (lb)
front 1,560 ( 3,440)
rear 1,175 ( 2,590)
Max. G. V. W. 6,000 (13,230)
front 2,260 ( 4,980)
rear 4,200 ( 9,260)
35.0
ANNOTATIONS
(2) Empty vehicle weight includes weight of oil, fuel, coolant but exclude spare tire carrier and bracket, spare tire & disc wheel
1and standard tool set.
1right sides are symmetric with respect to the chassis center line.
FE83PCD6 SERIES DUMP BODY SPECIFICATIONS

Body
Floor thickness 3.2 mm (0.13 in.)
Front panel thickness 2.3 mm (0.09 in.)
Side panel thickness 3.2 mm (0.13 in.)
Tail panel thickness 3.2 mm (0.13 in.)
Type of Tipping Gear Under body, hydraulic cylinder with link mechanism
Pump
Type Gear type (KPC-25)
Capacity 24.8 cc/rev (1.52 cu.in./rev)
Hoist
Type Single piston type with link
Tipping Performance
Angle of tip (approx.) 55 degree
Lifting time (approx.) 20 sec.
Lowering time (approx.) 20 sec.
FE83PCD6 SERIES CHASSIS SPECIFICATIONS

Engine
Max. torque (JIS) 255 N·m (26.0 kgf·m / 188 lb·ft)
Facing material Woven (asbestos free), 275 mm (10.8 in.)
Transmission
Model M025S5
Type
Gear ratios 5.181-2.865-1.593-1.000-0.739, Rev. 5.181
Model D2H
Ratio 6.166
Tread pattern Lug
Suspensions
Front
Main
–No. of leaves
1,250 mm x 70 mm x
11 mm-5 (
49.2 in. x 2.76 in. x )
0.43 in.
8 mm-4 0.31 in.
Helper 990 mm x 70 mm x
9 mm-2 (
39.0 in. x 2.76 in. x )
0.35 in.
Brakes
Batteries
52 Ah (187 kC) at 5 hr rate (75D26L)
ANNOTATION

Mitsubishi Fuso Canter Fb-Fe-Fg PDF

Uploaded by

Copyright:

Available Formats

Mitsubishi Fuso Canter Fb-Fe-Fg PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mitsubishi Fuso Canter Fb-Fe-Fg PDF

Uploaded by

Copyright:

Available Formats

CONTENTS

■ BASIC MODELS & SPECIFICATIONS

2. CARGO & DUMP TRUCK

BODY CODE BODY TYPE

3. EXTERIOR COLOR & INTERIOR CODE

EXTERIOR FB, FE, FG

INTERIOR CODE 00G

B. Empty Vehicle Weight

C. Gross Vehicle Weight (G.V.W.)

D. Maximum Gross Vehicle Weight (Max. G.V.W.)

E. Payload Capacity and Weight Distribution

F. Maximum Gross Combination Weight (Max. G.C.W.)

2.540 1 0.30480 1 0.3333 1.60934 1

sq. cm sq. in sq. m sq. ft sq. yd sq. km sq. mile

6.4516 1 0.092903 1 0.1111 2.58999 1

cu. m cu. ft cu. yd L U.S. gal lmp. gal

0.02832 1 0.37037 3.78543 1 0.83327

0.76455 27.00 1 4.5460 1.20091 1

kgf・m lb・ft N・m

FE71PBN4 Standard Cab 4.7

FE83PC6 Wide Cab

Wide Double Cab

FG83PC6 Wide Cab

2. Body applications classified by model of chassis (¡: recommendable)

MITSUBISHI FUSO TRUCK CHASSIS

CHASSIS DIMENSIONS, WEIGHTS AND PERFORMANCE

985 470 3190

BASIC CHASSIS SPECIFICATIONS

BASIC CHASSIS SPECIFICATIONS (continued)

BASIC CHASSIS SPECIFICATIONS (continued)

BASIC ENGINE SPECIFICATIONS

STANDARD BARO. PRESSURE TEMP. OF INLET AIR ACCESSORIES*

* Other than built-in accessories essential to engine operation.

ENGINE PERFORMANCE CURVES

BRAKE SPECIFIC FUEL CONSUMPTION

1600 2000 2400 2800 3200 3600 4000 4200

VEHICLE PERFORMANCE CURVES

900 FINAL G/RATIO 5.285

FB71A SERIES OPTIONAL EQUIPMENT

*1 Except for Central and South America

2. Body applications classified by model of chassis (¡: recommendable)

MITSUBISHI FUSO TRUCK CHASSIS

CHASSIS DIMENSIONS, WEIGHTS AND PERFORMANCE

985 470 3095

MITSUBISHI FUSO TRUCK CHASSIS

CHASSIS DIMENSIONS, WEIGHTS AND PERFORMANCE

985 470 3105

BASIC CHASSIS SPECIFICATIONS

BASIC CHASSIS SPECIFICATIONS (continued)

BASIC CHASSIS SPECIFICATIONS (continued)

BASIC ENGINE SPECIFICATIONS

STANDARD BARO. PRESSURE TEMP. OF INLET AIR ACCESSORIES*

* Other than built-in accessories essential to engine operation.

ENGINE PERFORMANCE CURVES

BRAKE SPECIFIC FUEL CONSUMPTION

1400 1800 2200 2600 3000 3200 3400

VEHICLE PERFORMANCE CURVES

RUNNING RESISTANCE AND TRACTION (kg)

Rev. 5.181 Rev. 5.181