T2600G Series Datasheet
T2600G Series Datasheet
T2600G Series Datasheet
Networking Security
The T2600G series provide IP-MAC-Port Binding, Port Security, Storm control and DHCP Snooping which protect against broadcast storms, ARP attacks, etc.
It integrates some typical DoS attacks to select. You can protect these attacks more easily ever than before. In addition, the Access Control Lists (ACL, L2 to
L4) feature restricts access to sensitive network resources by denying packets based on source and destination MAC address, IP address, TCP/UDP ports
and even VLAN ID. Moreover, the switch supports 802.1X authentication, which is used in conjunction with a RADIUS/TACACS+ server to require some
authentication information before access to the network is allowed.
ISP Features
The T2600G series support a bundle of ISP features such as 802.3ah OAM*, DDM*, sFlow, QinQ, L2PT PPPoE ID Insertion, IGMP authentication etc. 802.3ah
OAM and Device Link Detection Protocol (DLDP) functions improve monitor and troubleshoot Ethernet networks, help facilitate network management.
DDM(Digital Diagnostic Monitoring) function helps view the status of SFP modules inserting to the Switch and to configure alarm settings, warning settings,
temperature threshold settings, voltage threshold settings, bias current threshold settings, TX power threshold settings, and Rx power threshold settings.
IPv6 Support
The T2600G series support various IPv6 functions such as Dual IPv4/IPv6 Stack, MLD Snooping, IPv6 ACL, DHCPv6 Snooping, IPv6 Interface, Path
Maximum Transmission Unit (PMTU) Discovery and IPv6 Neighbor Discovery, which guarantees your network is ready for the Next Generation Network
(NGN) without upgrading your network equipment.
Product Pictures
24 Gigabit SFP
16 10/100/1000Mbps Slots, 4 Combo 48 10/100/1000Mbps
Interfaces RJ45 Ports, 2 Gigabit 24 10/100/1000Mbps RJ45 Ports, 4 Gigabit SFP Slots 10/100/1000Mbps RJ45 Ports, 4 Gigabit
General SFP Slots RJ45 Ports, 4 10G SFP Slots
SFP+ Slots
Switching
36Gbps 56Gbps 128Gbps 104Gbps
Capacity
Forwarding
26.8Mpps 41.7Mpps 95.2Mpps 77.4Mpps
Rate
PoE
802.3at/af
Standards
PoE Power
384W
Budget
Hardware Specifications & Performance
Product Pictures
18.26W (220V/50Hz)
(no PD connected)
Max Power
11.47W (220V/50Hz) 15.33W (220V/50HZ) 15.33W 450.80W (110V/60HZ) 29.67W (220V/50Hz) 33.52W (220V/50Hz)
Consumption
(with 384W PD
connected)
62.30 BTU/h
(no PD connected)
Max Heat
39.14 BTU/h 52.30 BTU/h 52.30 BTU/h 1536.68 BTU/h 101.23 BTU/h 114.37 BTU/h
Dissipation
(with 384W PD
connected)
Operating
0°C~40°C (32°F~104°F)
Temperature
Storage
-40°C~70°C (-40°F~158°F)
Temperature
Operating
10% ~ 90%RH, non-condensing
Humidity
Storage
5%~90%RH, non-condensing
Humidity
CE, FCC
Software Features
• Link Aggregation - Port based
- static link aggregation - VLAN based
- 802.3ad LACP • Flow Control
- Up to 14 aggregation groups, containing 8 ports per group - 802.3x Flow Control
(T2600G-18TS, T2600G-28TS, T2600G-28TS-DC and T2600G-28MPS support 8 groups) - HOL Blocking Prevention
• Spanning Tree Protocol • Mirroring
L2 Features
- 802.1D STP - Port Mirroring
- 802.1w RSTP - CPU Mirroring
- 802.1s MSTP - One-to-One
- STP Security: TC Protect, BPDU Filter, Root Protect - Many-to-One
• Loopback Detection - Flow-Based
- Tx/Rx/Both
Host Switch
www.tp-link.com
Specifications are subject to change without notice. TP-Link is a registered trademark of TP-Link Technologies Co., Ltd. Other brands and product names are trademarks or
registered trademarks of their respective holders. Copyright © 2019 TP-Link Technologies Co., Ltd. All rights reserved.