Mobile Comm - Worksheet2

Work sheet- 2
1. In IEEE 802.11, a station with ______ mobility is either stationary (not moving) or
moving only inside a BSS.
A) no-ransition
B) BSS-transition
C) ESS-transition
D) none of the above
2. In IEEE 802.11, a station with ______ mobility can move from one ESS to
another.
A) no-transition
B) BSS-transition
C) ESS-transition
3. In IEEE 802.11, ____ _ is an optional access method that can be implemented in

an infrastructure network (not in an ad hoc network).
A) CF
B) pCF
C) either (a) or (b)
D) neither (a) nor (b)
4. In IEEE 802.11, when a frame is going from one station in a BSS to another without passing
through the distribution system, the address flag is _____
A) 00
B) 01
C) 10
D) 11
5. The RTS and CTS frames in CSMA/CA ____ solve the hidden station problem. The RTS
and CTS frames in CSMA/CA ____ solve the exposed station problem.
A) can; cannot
B) cannot; c an
C)can; can
D)cannot; cannot
6. In Bluetooth, the _______ layer is roughly equivalent to the physical layer of the Internet
model.
A) radio
B) baseband
C) L2CAP
7. In Bluetooth, the _____layer is roughly equivalent to the MAC sublayer in LANs.

A) radio
B) baseband
C) L2CAP
8. In Bluetooth, the L2CAP sublayer, is roughly equivalent to the LLC sublayer in LANs.
A) radio
B) baseband
C) L2CAP
9. The access method in Bluetooth is ________.

A) FDMA
B) TDD-TDMA
C) CDMA
10. In Bluetooth, the _____ link is used when avoiding latency (delay in data delivery) is more
important than integrity (error-free delivery).
A) SCO
B) ACL
C) ACO
D) SCL
11. In Bluetooth, the _____ link is used when data integrity is more important than avoiding
latency.
A) SCO
B) ACL
C) ACO
D) SCL
12. Bluetooth uses ____ method in the physical layer to avoid interference from other
devices or other networks.
A) DSSS
B) FHSS
C) FDMA
13. Some examples for wireless communication system are:

(a) Cordless phones,
(b) handheld walkie-talkies,
(c) pagers
(d) all of
these
14. The terms “data” and “information” mean the same thing.
(a) True
(b) False
(c) Same
(d) None of these
15. What is the frequency range of the IEEE 802.11a

standard? A.2.4Gbps B.5Gbps
C.2.4GHz D.5GHz
16. What is the maximum distance running the lowest data rate for 802.11b?
A. About 100 feet
B. About 175 feet
C. About 300 feet
D. About 350
feet
17. What is the maximum distance with maximum data rate for
802.11a? A. About 65-75 feet
B. About 90-100 feet
C. About 150 feet
D. Over 200 feet
18. What is the frequency range of the IEEE 802.11b

standard? A.2.4Gbps B.5Gbps
C.2.4GHz
D.5GHz
19. You have a Cisco mesh network. What protocol allows multiple APs to connect with
many redundant connections between nodes?
A.LWAPP
B.AWPP C.STP
D.IEEE
20. The sharing of a medium and its link by two or more devices is called _______.
(a) modulation
(b) encoding
(c) line disciple
(d) multiplexing
21. Which multiplexing technique transmits analog

signals? (a) FDM
(b) TDM
(c) WDM
(d) a&c
22. What is the frequency reuse factor in

CDMA? (a). 0
(b). 1
(c). 10
(d). infinity
23. In CDMA, Reduction of co channel interference due to processing gain allows

frequency reuse factor of _____ _.
(a). zero
(b). one
(c). ten
(d). infinity
24. Transmission media are usually categorized as _____

A) Fixed or unfixed
B) Guided or unguided
C) Determinate or indeterminate
D) Metallic or nonmetallic
25. Transmission media lie below the _______

layer. A) physical
B) Network
C) Transport
D) Application
26. ____ _ cable consists of an inner copper core and a second conducting outer
Sheath.
A) Twisted-pair
B) Coaxial
C) Fiber-optic
D) Shielded twisted-pair
27. In fiber optics, the signal is _______

waves. A) Light
B) Radio
C) infrared
D) Very low-frequency
28. Which of the following primarily uses guided

media? A) Cellular telephone system
B) Local telephone system
C) Satellite communications
D) Radio broadcasting
29. Which of the following is not a guided

medium? A) twisted-pair cable
B) Coaxial cable
C) fiber-optic cable
D) Atmosphere
30. What is the major factor that makes coaxial cable less susceptible to noise
than? Twisted-pair cable?
A) Inner conductor
B) Diameter of cable
C) Outer conductor
D) Insulating material

Mobile Comm - Worksheet2

Uploaded by

Copyright:

Available Formats

Mobile Comm - Worksheet2

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Mobile Comm - Worksheet2

Uploaded by

Copyright:

Available Formats

Work sheet- 2

3. In IEEE 802.11, ____ _ is an optional access method that can be implemented in

7. In Bluetooth, the _____layer is roughly equivalent to the MAC sublayer in LANs.

9. The access method in Bluetooth is ________.

13. Some examples for wireless communication system are:

15. What is the frequency range of the IEEE 802.11a

18. What is the frequency range of the IEEE 802.11b

21. Which multiplexing technique transmits analog

22. What is the frequency reuse factor in

23. In CDMA, Reduction of co channel interference due to processing gain allows

24. Transmission media are usually categorized as _____

25. Transmission media lie below the _______

27. In fiber optics, the signal is _______

28. Which of the following primarily uses guided

29. Which of the following is not a guided

You might also like