Scribd Logo
Upload

Welcome to Scribd!

  • 68 views

    Fiat

    Uploaded by

    ligia
    This document provides instructions for resetting odometers on various Fiat models using a Tacho Universal device. It describes the necessary steps which include removing clusters, identifying processor chips, cutting tracks or joining contacts, connecting cables and clips, selecting the appropriate menu option, entering a new odometer value, and verifying. Instructions are provided for 11 different Fiat models: Bravo/Brava, Marea, Tipo, Tempra, Punto 2000, Ulysse, and Multipla.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Fiat

    Uploaded by

    ligia
    68 views12 pages
    This document provides instructions for resetting odometers on various Fiat models using a Tacho Universal device. It describes the necessary steps which include removing clusters, identifying processor chips, cutting tracks or joining contacts, connecting cables and clips, selecting the appropriate menu option, entering a new odometer value, and verifying. Instructions are provided for 11 different Fiat models: Bravo/Brava, Marea, Tipo, Tempra, Punto 2000, Ulysse, and Multipla.

    Original Description:

    esquema de tablero de fiat

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for resetting odometers on various Fiat models using a Tacho Universal device. It describes the necessary steps which include removing clusters, identifying processor chips, cutting tracks or joining contacts, connecting cables and clips, selecting the appropriate menu option, entering a new odometer value, and verifying. Instructions are provided for 11 different Fiat models: Bravo/Brava, Marea, Tipo, Tempra, Punto 2000, Ulysse, and Multipla.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    68 views12 pages

    Fiat

    Uploaded by

    ligia
    This document provides instructions for resetting odometers on various Fiat models using a Tacho Universal device. It describes the necessary steps which include removing clusters, identifying processor chips, cutting tracks or joining contacts, connecting cables and clips, selecting the appropriate menu option, entering a new odometer value, and verifying. Instructions are provided for 11 different Fiat models: Bravo/Brava, Marea, Tipo, Tempra, Punto 2000, Ulysse, and Multipla.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 12

    Fiat

    Select the model:

    Model Bravo / Brava version with ST-board


    Model Bravo / Brava version custom
    Model Bravo / Brava version 908
    Model Bravo / Brava UK NSI
    Fiat Model Marea version MM3S
    Model Marea version QAF, OPT and 68H
    Model Tipo Borg / Veglia
    Model Tempra Borg / Veglia
    Model Punto 2000
    Model Ulysse
    Model Multipla

    page 1
    Model Bravo / Brava version with ST-board
    Use the Alfa 145/146 / Renault Twingo-plug:

    • Remove the cluster and open it.


    • Look for the Magneti Marelli processor. It is on a small circuit board that
    has not to be removed.
    • Cut the pin for the red cable.
    • Connect the cables as shown in the picture.
    • Connect the plug to the Tacho Universal.
    • Select the menu: Fiat-Bravo/Brava-ST-Modul
    • The Tacho Universal shows you the old value.
    • Enter the new value.
    • Verify the new value with OK.

    page 2
    Model Bravo / Brava version custom
    Only for Zc9939... and Zc501... processors
    Use the Peugeot 406-plug:

    • Remove the cluster and open it.


    • Look for the processor.
    • Cut the track and connect the 2 pins as shown.
    • Connect the cables as shown in the picture (the data-cables are connected
    as a pair, so you can recognize them).
    • Connect the plug to the Tacho Universal.
    • Select the menu: Fiat-Bravo/Brava-Custom
    • The Tacho Universal does not show you the old value.
    • Enter the new value.
    • Verify the new value with OK.

    page 3
    Model Bravo / Brava version 908
    Use the 908-plug:

    • Remove the cluster and open it.


    • Connect the cables as shown in the picture.
    • Connect the plug to the Tacho Universal.
    • Select the menu: Fiat-Bravo/Brava-908 V1 or V2
    • The Tacho Universal displays you the old value. Only program with the
    version that gives you the correct value.
    • Enter the new value. Verify the new value with OK.

    page 4
    Model Bravo / Brava UK NSI
    Use this board and clip:

    • Remove the cluster and open it.


    • Connect the cables as shown in the picture.
    • Connect the clip to Port 1.
    • Select the menu: Fiat-Bravo UKNSI
    • The Tacho Universal shows you the old value.
    • Select the menu Adjust KM.
    • Enter the new value.
    • Verify the new value with OK.
    Note:
    If the Tacho Universal displays you the double of the original value, you have
    to program the double of the desired value!

    page 5
    Model Marea version MM3S
    Use the Scorpio-Plug:

    • Remove the cluster and open it.


    • Cut the black marked track.
    • Connect the cables as shown in the picture.
    • Select the menu: - MM3S
    • The Tacho Universal shows you the old value.
    • Enter the new value.
    • Verify the new value with OK.
    • Repair the track that you have cut before.

    page 6
    Model Marea version QAF, OPT and 68H
    Use the Peugeot 406 plug:

    • Remove the cluster and open it.


    • Look for the processor.
    • Connect the cables as shown in the picture (the data-cables are
    connected as a pair, so you can recognize them).
    • Connect the plug to the Tacho Universal.
    • Select the menu: Fiat-Marea- QAF/OPT oder 68H
    • The Tacho Universal does not show you the old value.
    • Enter the new value.
    • Verify the new value with OK.

    page 7
    Model Tipo Borg / Veglia
    Use this board and clip:

    • Remove the cluster and open it.


    • Look for the 8 pin chip 93C06.
    • Look for the silver chrystal and join its contacts.
    • Connect the clip to Port 1.
    • Put the clip on the chip 93C06 (red on pin 1).
    • Select the menu: Fiat-Tipo Borg oder Tipo Veglia
    • The Tacho Universal shows you the old value.
    • Select the menu Adjust KM.
    • Enter the new value.
    • Verify the new value with OK.

    page 8
    Model Tempra Borg / Veglia

    Use this board and clip:

    • Remove the cluster and open it.


    • Look for the 8 pin chip 93C06.
    • Look for the silver chrystal and join its contacts.
    • Connect the clip to Port 1.
    • Put the clip on the chip 93C06 (red on pin 1).
    • Select the menu: Fiat-Tempra Borg oder Tipo Veglia
    • The Tacho Universal shows you the old value.
    • Select the menu Adjust KM.
    • Enter the new value.
    • Verify the new value with OK.

    page 9
    Model Punto 2000
    Use the 908 plug:

    • Remove the cluster and open it.


    • Look, what processor it is to be able to select the correct program.
    • Connect the cables as shown in the picture.
    • Select the menu: Fiat-Punto 2000- 68HC or XC44 or XC52
    • The Tacho Universal shows you the old value.
    • Enter the new value.
    • Verify the new value with OK.

    Note:
    There are several shapes of the circuit board. Important for programming are
    only the 3 points on the left side of the board!

    page 10
    Model Ulysse
    Use the Megane / Peugeot 206 plug:

    • Remove the cluster and open it.


    • Connect the cables as shown in the picture.
    • Select the menu: Fiat-Ulysse
    • The Tacho Universal shows you the old value.
    • Enter the new value.
    • Verify the new value with OK.

    page 11
    Model Multipla
    Use this board and clip:

    • Remove the cluster and open it.


    • Look for the 8 pin chip 93C56.
    • Look for the silver chrystal and join its contacts.
    • Connect the clip to Port 1.
    • Put the clip on the chip 93C56 (red on pin 1).
    • Select the menu: Fiat- Multipla
    • The Tacho Universal shows you the old value.
    • Select the menu Adjust KM.
    • Enter the new value.
    • Verify the new value with OK.

    page 12

    You might also like