Fehling Solution "B" MSDS: Section 1: Chemical Product and Company Identification
Fehling Solution "B" MSDS: Section 1: Chemical Product and Company Identification
Fehling Solution "B" MSDS: Section 1: Chemical Product and Company Identification
0 0
Fire
2 1
Re a c t iv it y 2
P e rs o n a l
P ro t e c t io n
Toxicological Data on Ingredients: Potassium sodium tartrate LD50: Not available. LC50: Not available. Sodium hydroxide
LD50: Not available. LC50: Not available.
p. 1
available. The substance is toxic to lungs, mucous membranes. Repeated or prolonged exposure to the substance can
produce target organs damage. Repeated or prolonged contact with spray mist may produce chronic eye irritation and severe
skin irritation. Repeated or prolonged exposure to spray mist may produce respiratory tract irritation leading to frequent attacks
of bronchial infection.
Eye Contact:
Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids
open. Cold water may be used. Do not use an eye ointment. Seek medical attention.
Skin Contact:
If the chemical got onto the clothed portion of the body, remove the contaminated clothes as quickly as possible, protecting
your own hands and body. Place the victim under a deluge shower. If the chemical got on the victim's exposed skin, such
as the hands : Gently and thoroughly wash the contaminated skin with running water and non-abrasive soap. Be particularly
careful to clean folds, crevices, creases and groin. Cold water may be used. If irritation persists, seek medical attention. Wash
contaminated clothing before reusing.
Serious Skin Contact:
Wash with a disinfectant soap and cover the contaminated skin with an anti-bacterial cream. Seek medical attention.
Inhalation: Allow the victim to rest in a well ventilated area. Seek immediate medical attention.
Serious Inhalation:
Evacuate the victim to a safe area as soon as possible. Loosen tight clothing such as a collar, tie, belt or waistband. If
breathing is difficult, administer oxygen. If the victim is not breathing, perform mouth-to-mouth resuscitation. WARNING: It may
be hazardous to the person providing aid to give mouth-to-mouth resuscitation when the inhaled material is toxic, infectious or
corrosive. Seek immediate medical attention.
Ingestion:
Do not induce vomiting. Loosen tight clothing such as a collar, tie, belt or waistband. If the victim is not breathing, perform
mouth-to-mouth resuscitation. Seek immediate medical attention.
Serious Ingestion: Not available.
p. 2
Small Spill:
Dilute with water and mop up, or absorb with an inert dry material and place in an appropriate waste disposal container. If
necessary: Neutralize the residue with a dilute solution of acetic acid.
Large Spill:
Corrosive liquid. Stop leak if without risk. Absorb with DRY earth, sand or other non-combustible material. Do not get water
inside container. Do not touch spilled material. Use water spray curtain to divert vapor drift. Prevent entry into sewers,
basements or confined areas; dike if needed. Call for assistance on disposal. Neutralize the residue with a dilute solution of
acetic acid. Be careful that the product is not present at a concentration level above TLV. Check TLV on the MSDS and with
local authorities.
Precautions:
Keep container dry. Do not breathe gas/fumes/ vapour/spray. Never add water to this product In case of insufficient ventilation,
wear suitable respiratory equipment If you feel unwell, seek medical attention and show the label when possible. Avoid contact
with skin and eyes Keep away from incompatibles such as moisture.
Storage: Corrosive materials should be stored in a separate safety storage cabinet or room.
Engineering Controls:
Provide exhaust ventilation or other engineering controls to keep the airborne concentrations of vapors below their respective
threshold limit value.
Personal Protection:
Face shield. Full suit. Vapor respirator. Be sure to use an approved/certified respirator or equivalent. Gloves. Boots.
Personal Protection in Case of a Large Spill:
Splash goggles. Full suit. Vapor respirator. Boots. Gloves. A self contained breathing apparatus should be used to avoid
inhalation of the product. Suggested protective clothing might not be sufficient; consult a specialist BEFORE handling this
product.
Exposure Limits:
Sodium hydroxide CEIL: 2 (mg/m3) from ACGIH [1995] Consult local authorities for acceptable exposure limits.
p. 3
Vapor Density: The highest known value is 0.62 (Air = 1) (Water).
Volatility: Not available.
Odor Threshold: Not available.
Water/Oil Dist. Coeff.: Not available.
Ionicity (in Water): Not available.
Dispersion Properties: See solubility in water.
Solubility: Easily soluble in cold water.
p. 4
Waste Disposal:
The information above is believed to be accurate and represents the best information currently available to us. However, we
make no warranty of merchantability or any other warranty, express or implied, with respect to such information, and we assume
no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for
their particular purposes. In no event shall ScienceLab.com be liable for any claims, losses, or damages of any third party or for
p. 5
lost profits or any special, indirect, incidental, consequential or exemplary damages, howsoever arising, even if ScienceLab.com
has been advised of the possibility of such damages.
p. 6