Scribd Logo
Upload

Welcome to Scribd!

  • 35 views

    Test Project Electrical Installations: WSC2017 - TP18 - KNX - Functions - Actual

    Uploaded by

    Doc Bry
    This document describes the functions of different KNX switches and thermostats. A 2-gang switch has functions for on/off control of light H1 and feedback LEDs. A 4-gang switch acts as a master on/off, includes short and long press functions, and controls lights and shutters. An additional thermostat switch allows adjusting temperature setpoints and includes heating, cooling, and on/off/dim toggle functions for lights H2 and H4.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Test Project Electrical Installations: WSC2017 - TP18 - KNX - Functions - Actual

    Uploaded by

    Doc Bry
    35 views3 pages
    This document describes the functions of different KNX switches and thermostats. A 2-gang switch has functions for on/off control of light H1 and feedback LEDs. A 4-gang switch acts as a master on/off, includes short and long press functions, and controls lights and shutters. An additional thermostat switch allows adjusting temperature setpoints and includes heating, cooling, and on/off/dim toggle functions for lights H2 and H4.

    Original Title

    WSC2017_TP18_KNX_functions_actual.docx

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document describes the functions of different KNX switches and thermostats. A 2-gang switch has functions for on/off control of light H1 and feedback LEDs. A 4-gang switch acts as a master on/off, includes short and long press functions, and controls lights and shutters. An additional thermostat switch allows adjusting temperature setpoints and includes heating, cooling, and on/off/dim toggle functions for lights H2 and H4.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    35 views3 pages

    Test Project Electrical Installations: WSC2017 - TP18 - KNX - Functions - Actual

    Uploaded by

    Doc Bry
    This document describes the functions of different KNX switches and thermostats. A 2-gang switch has functions for on/off control of light H1 and feedback LEDs. A 4-gang switch acts as a master on/off, includes short and long press functions, and controls lights and shutters. An additional thermostat switch allows adjusting temperature setpoints and includes heating, cooling, and on/off/dim toggle functions for lights H2 and H4.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 3

    TEST PROJECT

    ELECTRICAL
    INSTALLATIONS
    WSC2017_TP18_KNX_functions_actual

    WSC2017_TP18
    S5: 2 GANG KNX
    FUNCTION 1: ON/OFF
    ROCKER 1:
    Left: ON H1 Right: OFF H1

    FUNCTION 2: FEEDBACK LED


    Left LED: H1 ON = BLUE, H1 OFF = LED OFF
    Right LED: H1 ON = LED OFF, H1 OFF = LED
    OFF

    FUNCTION 3: ON/OFF/DIM
    ROCKER 2:
    Left: ON/DIM UP H2 Right: OFF/DIM DOWN H2
    LED FEDDBACK:
    Left LED: H2 ON =GREEN, H2 OFF = LED OFF
    FUNCTION 4: FEEDBACK LED
    Right LED: H2 ON = LED OFF, H2 OFF = RED
    Left LED: H2 ON =GREEN, H2 OFF = LED OFF
    Right LED: H2 ON = LED OFF, H2 OFF = RED

    S6: 4 GANG KNX


    FUNCTION 5: MASTER ON/OFF
    Rocker 1: Left = On, Right = OFF (H1, H2, H3, H4)

    FUNCTION 6: SHORT PRESS/LONG PRESS


    Rocker 2: Left: Long press (more than 3 seconds) = H1 On
    Right: Short press (less than 3 seconds) = H3 On

    FUNCTION 7: SHUTTER
    Rocker 3: (Travel time shutter (H5) = 10 seconds)
    Left: short press = stop/step UP, Long press = UP
    Right: short press = stop/step DOWN, Long press = DOWN

    FUNCTION 8: LIGHT SCENES


    Rocker 4:
    Left: H1=ON, H2=10%, H3=Off, H4=100%, H5=DOWN
    Right: H1=OFF, H2=100%, H3=ON, H4=10%, H5=UP

    Version: 1.0
    WSC2017_TP18_KNX_functions _actual 2 of 3
    Date: 28.09.17
    S7: THERMOSTAT FUNCTION 9: THERMOSTAT
    Thermostats controls heating (H7) and cooling (H8).
    When actual temperature is below setpoint:
    Heating ON (H7), Cooling OFF (H8)
    When actual temperature is above setpoint:
    Heating OFF (H7), Cooling ON (H8)
    Heating and cooling should never be on at the same time.
    ROCKER 1: It should be possible to change the setpoint up to
    9 degrees each direction.
    Left: Setpoint lower (-)
    Right Setpoint higher (+)

    FUNCTION 10: ON/OFF/DIM TOGGLE


    Rocker 2:
    Left: Toggle ON/OFF/DIM H2
    Right: Toggle ON/OFF/DIM H4
    The button should always know the status of the lamp. When
    pressing the button, the lamp should always change from one
    state to another.

    Version: 1.0
    WSC2017_TP18_KNX_functions _actual 3 of 3
    Date: 28.09.17

    You might also like