SSH Cheat Sheet

SSH Cheat Sheet
SSH has several features that are useful during pentesting and auditing. This page
aims to remind us of the syntax for the most useful features.
NB: This page does not attempt to replace the man page for pentesters, only to
supplement it with some pertinent examples.
SOCKS Proxy
Set up a SOCKS proxy on 127.0.0.1:1080 that lets you pivot through the remote host
(10.0.0.1):
Command line:
ssh -D 127.0.0.1:1080 10.0.0.1

~/.ssh/config:
Host 10.0.0.1
DynamicForward 127.0.0.1:1080
You can then use tsocks or similar to use non-SOCKS-aware tools on hosts accessible
from 10.0.0.1:
tsocks rdesktop 10.0.0.2

Local Forwarding
Make services on the remote network accessible to your host via a local listener.
NB: Remember that you need to be root to bind to TCP port <1024. Higher ports are
used in the examples below.
Example 1
The service running on the remote host on TCP port 1521 is accessible by connecting
to 10521 on the SSH client system.
Command line:
ssh -L 127.0.0.1:10521:127.0.0.1:1521 [email protected]

~/.ssh/config:
LocalForward 127.0.0.1:10521 127.0.0.1:1521

Example 2
Same thing, but other hosts on the same network as the SSH client can also connect
to the remote service (can be insecure).
Command line:
ssh -L 0.0.0.0:10521:127.0.0.1:1521 10.0.0.1

~/.ssh/config:
LocalForward 0.0.0.0:10521 127.0.0.1:1521

Example 3
In this example, 10.0.0.99 is a host that’s accessible from the SSH server. We can
access the service it’s running on TCP port 1521 by connecting to 10521 on the SSH
client.
Command line:
ssh -L 127.0.0.1:10521:10.0.0.99:1521 10.0.0.1

~/.ssh/config:
LocalForward 127.0.0.1:10521 10.0.0.99:1521

Remote Forwarding
Make services on your local system / local network accessible to the remote host
via a remote listener. This sounds like an odd thing to want to do, but perhaps
you want to expose a services that lets you download your tools.
NB: Remember that you need to be root to bind to TCP port <1024. Higher ports are
used in the examples below.
Example 1
The SSH server will be able to access TCP port 80 on the SSH client by connecting
to 127.0.0.1:8000 on the SSH server.
Command line:
ssh -R 127.0.0.1:8000:127.0.0.1:80 10.0.0.1

~/.ssh/config:
RemoteForward 127.0.0.1:8000 127.0.0.1:80

Example 2
The SSH server will be able to access TCP port 80 on 172.16.0.99 (a host accessible
from the SSH client) by connecting to 127.0.0.1:8000 on the SSH server.
Command line:
ssh -R 127.0.0.1:8000:172.16.0.99:80 10.0.0.1

~/.ssh/config:
RemoteForward 127.0.0.1:8000 172.16.0.99:80

Example 3
The SSH server will be able to access TCP port 80 on 172.16.0.99 (a host accessible
from the SSH client) by connecting to TCP port 8000 on the SSH server. Any other
hosts able to connect to TCP port 8000 on the SSH server will also be able to
access 172.16.0.99:80. This can sometimes be insecure.
Command line:
ssh -R 0.0.0.0:8000:172.16.0.99:80 10.0.0.1

~/.ssh/config:
RemoteForward 0.0.0.0:8000 172.16.0.99:80

Configuration Files
~/.ssh/config
It’s sometimes easier to configure options on your SSH client system in
~/.ssh/config for hosts you use a lot rather than having to type out long command
lines.
Using ~/.ssh/config also makes it easier to use other tools that use SSH (e.g. scp
and rsync). It’s possible to tell other tools that SSH listens on a different
port, but it’s a pain.
Host 10.0.0.1
Port 2222
User ptm
ForwardX11 yes
DynamicForward 127.0.0.1:1080
RemoteForward 80 127.0.0.1:8000
LocalForward 1521 10.0.0.99:1521
The above lines are explained more fully in the other subsection on this page.
~/.ssh/authozied_keys
During a pentest or audit, you might want to add an authorized_keys file to let you
log in using an SSH key.
The authorized_keys file lives in a user’s home directory on the SSH server. It
holds the public keys of the users allowed to log into that user’s account.
Generate a public/private key pair like this:
ssh-keygen -f mykey
cat mykey.pub # you can copy this to authorized_keys
If you want to shortest possible key (because your arbitrary-file-write vector is
limited), do this:
ssh-keygen -f mykey -t rsa -b 768

cat mykey.pub # copy to authorized_key. Omit the trailing user@host if you need a
shorter key.
Connect to the target system like this (you need to know the username of the user
you added an authorized key for):
ssh -i mykey [email protected]

Caveat: The authorized_keys file might not work if it’s writable by other users.
If you already have shell access you can “chmod 600 ~/.ssh/authorized_keys”.
However, if you’re remotely exploiting an arbitrary file-write vulnerability and
happen to have a weak umask, you may have problems.
X11 Forwarding
If your SSH client is also an X-Server then you can launch X-clients (e.g. Firefox)
inside your SSH session and display them on your X-Server. This works well with
from Linux X-Servers and from cygwin‘s X-server on Windows.
Command Line:
SSH -X 10.0.0.1
SSH -Y 10.0.0.1 # less secure alternative - but faster
~/.ssh/config:
ForwardX11 yes
ForwardX11Trusted yes # less secure alternative - but faster
SSH Agents
SSH agents can be used to hold your private SSH keys in memory. The agent will
then authenticate you to any hosts that trust your SSH key.
This has the following advantages:
You don’t have to keep entering your passphrase (if you chose to encrypt your
private key)
But you still get to store your private SSH key in an encrypted format on disk.
Using an SSH agent is probably more secure than storing your key in cleartext, but
agents can be hijacked.
Using an SSH Agent

First start your agent:
eval `ssh-agent`
Then add your keys to it – you’ll need to enter your passphrase for any encrypted
keys:
ssh-add ~/dir/mykey
Hijacking SSH Agents
If you see SSH agents running on a pentest (process called “ssh-agent”), you might
be able to use it to authenticate you to other hosts – or other accounts on that
host. Check out ~/.ssh/known_hosts for some ideas of where you might be able to
connect to.
You can use any agents running under the account you compromised. If you’re root
you can use any SSH agent.
SSH agents listen on a unix socket. You need to figure where this is for each
agent (e.g. /tmp/ssh-tqiEl28473/agent.28473). You can then use the agent like this:
export SSH_AUTH_SOCK=/tmp/ssh-tqiEl28473/agent.28473
ssh-add -l # lists the keys loaded into the agent
ssh user@host # will authenticate you if server trusts key in agent
This command illustrates how you could inspect the environment of every ssh-agent
process on a Linux system. It should yield a list of unix sockets for SSH agents.
ps auxeww | grep ssh-agent | grep SSH_AUTH_SOCK | sed 's/.*SSH_AUTH_SOCK=//' | cut

-f 1 -d ' '
Agent Forwarding
If you enable SSH agent forwarding then you’ll be able to carry on using the SSH
agent on your SSH client during your session on the SSH server. This is
potentially insecure because so will anyone else who is root on the SSH server
you’re connected to. Avoid using this feature with any keys you care about
Ref: http://pentestmonkey.net/cheat-sheet/ssh-cheat-sheet

SSH Cheat Sheet

Uploaded by

Copyright:

Available Formats

SSH Cheat Sheet

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

SSH Cheat Sheet

Uploaded by

Copyright:

Available Formats

What are some useful SSH features covered?

What are some useful SSH features covered?

How can you set up port forwarding with SSH?

How can you set up port forwarding with SSH?

SSH Cheat Sheet

ssh -D 127.0.0.1:1080 10.0.0.1

tsocks rdesktop 10.0.0.2

ssh -L 127.0.0.1:10521:127.0.0.1:1521 [email protected]

LocalForward 127.0.0.1:10521 127.0.0.1:1521

ssh -L 0.0.0.0:10521:127.0.0.1:1521 10.0.0.1

LocalForward 0.0.0.0:10521 127.0.0.1:1521

ssh -L 127.0.0.1:10521:10.0.0.99:1521 10.0.0.1

LocalForward 127.0.0.1:10521 10.0.0.99:1521

ssh -R 127.0.0.1:8000:127.0.0.1:80 10.0.0.1

RemoteForward 127.0.0.1:8000 127.0.0.1:80

ssh -R 127.0.0.1:8000:172.16.0.99:80 10.0.0.1

RemoteForward 127.0.0.1:8000 172.16.0.99:80

ssh -R 0.0.0.0:8000:172.16.0.99:80 10.0.0.1

RemoteForward 0.0.0.0:8000 172.16.0.99:80

Generate a public/private key pair like this:

ssh-keygen -f mykey -t rsa -b 768

ssh -i mykey [email protected]

This has the following advantages:

Using an SSH Agent

ps auxeww | grep ssh-agent | grep SSH_AUTH_SOCK | sed 's/.*SSH_AUTH_SOCK=//' | cut

You might also like