HyperWorks Desktop 14.0.120 ReleaseNotes

HyperWorks 14.0.
120
Release Notes
HyperWorks is a division of Altair altairhyperworks.com

Altair® HyperWorks®
A Platform for Innovation®
Copyright© 1986-2015 Altair Engineering Inc. All Rights Reserved.
Copyright© Altair Engineering Inc. All Rights Reserved for:

HyperMesh® 1990-2015; HyperCrash® 2001-2015; OptiStruct® 1996-2015; RADIOSS® 1986-2015; HyperView® 1999-2015;
HyperView Player® 2001-2015; HyperStudy® 1999-2015; HyperGraph® 1995-2015; MotionView® 1993-2015; MotionSolve®
2002-2015; HyperForm® 1998-2015; HyperXtrude® 1999- 2015; Process Manager™ 2003-2015; Templex™ 1990-2015;
TextView™ 1996-2015; MediaView™ 1999-2015; TableView™ 2013-2015; BatchMesher™ 2003-2015; HyperMath® 2007-2015;
HyperWeld® 2009-2015; HyperMold® 2009-2015; Manufacturing Solutions™ 2005-2015; solidThinking® 1993-2015; solidThinking
Inspire® 2009-2015; solidThinking Evolve® 1993-2015; Durability Director™ 2009-2015; Suspension Director™ 2009-2015;
AcuSolve® 1997-2015; AcuConsole® 2006-2015; SimLab® 2004-2015; Virtual Wind Tunnel™ 2012-2015; MDS™ 2011-2015 and
FEKO™ (©1999-2014 Altair Development S.A. (Pty) Ltd.; ©2014-2015 Altair Engineering, Inc.); MDS™ 2011-2015 and VisSim™
1989-2015.
Other Altair software applications include:
Altair PBS Works™: Compute Manager™ 2007-2015; Display Manager™ 2007-2015; PBS™ 1994-2015; PBS Professional®
1994-2015; PBS Application Services™ 2008-2015; PBS Analytics™ 2007-2015; and PBS Desktop™ 2007-2012; PBS Portal™
2007-2011; e-BioChem™ 2007-2013; e-Compute™ 2000-2007; e-Render™ 2006-2010; OpenPBS® 1994-2003 and Personal
PBS® 2007-2012.
Altair Simulation Cloud Suite: Simulation Manager™ 2003-2015; Compute Manager™ 2003-2015; Display Manager™ 2003–
2015; and Process Manager™ 2003-2015.
Altair Packaged Solution Offerings (PSOs) Copyright© 2008-2015

Automated Reporting Director™ 2008-2015; Impact Simulation Director™ 2010-2015; Model Mesher Director™ 2010-2015; Model
Verification Director™ 2013-2015; Squeak and Rattle Director™ 2012-2015; Virtual Gauge Director™ 2012-2015; Weld
Certification Director™ 2014-2015
Altair intellectual property rights are protected under U.S. and international laws and treaties. Additionally, Altair software is
protected under patent #6,859,792 and other patents pending. All other marks are the property of their respective owners.
ALTAIR ENGINEERING INC. Proprietary and Confidential. Contains Trade Secret Information.
Not for use or disclosure outside of Altair and its licensed clients. Information contained in Altair software shall not be decompiled,
disassembled, “unlocked”, reverse translated, reverse engineered, or publicly displayed or publicly performed in any manner.
Usage of the software is only as explicitly permitted in the end user software license agreement. Copyright notice does not imply
publication.
Third party software licenses
Software Security Measures:

Altair Engineering Inc. and its subsidiaries and affiliates reserve the right to embed software security mechanisms in the Software
for the purpose of detecting the installation and/or use of illegal copies of the Software. The Software may collect and transmit non-
proprietary data about those illegal copies. Data collected will not include any customer data created by or used in connection with
the Software and will not be provided to any third party, except as may be required by law or legal process or to enforce our rights
with respect to the use of any illegal copies of the Software. By using the Software, each user consents to such detection and
collection of data, as well as its transmission and use if an illegal copy of the Software is detected. No steps may be taken to avoid
or detect the purpose of any such security mechanisms.
Altair® HyperWorks®
A Platform for Innovation®
Copyright© 1986-2015 Altair Engineering Inc. All Rights Reserved.
Copyright© Altair Engineering Inc. All Rights Reserved for:

HyperMesh® 1990-2015; HyperCrash® 2001-2015; OptiStruct® 1996-2015; RADIOSS® 1986-2015; HyperView® 1999-2015;
HyperView Player® 2001-2015; HyperStudy® 1999-2015; HyperGraph® 1995-2015; MotionView® 1993-2015; MotionSolve®
2002-2015; HyperForm® 1998-2015; HyperXtrude® 1999- 2015; Process Manager™ 2003-2015; Templex™ 1990-2015;
TextView™ 1996-2015; MediaView™ 1999-2015; TableView™ 2013-2015; BatchMesher™ 2003-2015; HyperMath® 2007-2015;
HyperWeld® 2009-2015; HyperMold® 2009-2015; Manufacturing Solutions™ 2005-2015; solidThinking® 1993-2015; solidThinking
Inspire® 2009-2015; solidThinking Evolve® 1993-2015; Durability Director™ 2009-2015; Suspension Director™ 2009-2015;
AcuSolve® 1997-2015; AcuConsole® 2006-2015; SimLab® 2004-2015; Virtual Wind Tunnel™ 2012-2015; MDS™ 2011-2015 and
FEKO™ (©1999-2014 Altair Development S.A. (Pty) Ltd.; ©2014-2015 Altair Engineering, Inc.); MDS™ 2011-2015 and VisSim™
1989-2015.
Other Altair software applications include:
Altair PBS Works™: Compute Manager™ 2007-2015; Display Manager™ 2007-2015; PBS™ 1994-2015; PBS Professional®
1994-2015; PBS Application Services™ 2008-2015; PBS Analytics™ 2007-2015; and PBS Desktop™ 2007-2012; PBS Portal™
2007-2011; e-BioChem™ 2007-2013; e-Compute™ 2000-2007; e-Render™ 2006-2010; OpenPBS® 1994-2003 and Personal
PBS® 2007-2012.
Altair Simulation Cloud Suite: Simulation Manager™ 2003-2015; Compute Manager™ 2003-2015; Display Manager™ 2003–
2015; and Process Manager™ 2003-2015.
Altair Packaged Solution Offerings (PSOs) Copyright© 2008-2015

Automated Reporting Director™ 2008-2015; Impact Simulation Director™ 2010-2015; Model Mesher Director™ 2010-2015; Model
Verification Director™ 2013-2015; Squeak and Rattle Director™ 2012-2015; Virtual Gauge Director™ 2012-2015; Weld
Certification Director™ 2014-2015
Altair intellectual property rights are protected under U.S. and international laws and treaties. Additionally, Altair software is
protected under patent #6,859,792 and other patents pending. All other marks are the property of their respective owners.
ALTAIR ENGINEERING INC. Proprietary and Confidential. Contains Trade Secret Information.
Not for use or disclosure outside of Altair and its licensed clients. Information contained in Altair software shall not be decompiled,
disassembled, “unlocked”, reverse translated, reverse engineered, or publicly displayed or publicly performed in any manner.
Usage of the software is only as explicitly permitted in the end user software license agreement. Copyright notice does not imply
publication.
Third party software licenses
Software Security Measures:

Altair Engineering Inc. and its subsidiaries and affiliates reserve the right to embed software security mechanisms in the Software
for the purpose of detecting the installation and/or use of illegal copies of the Software. The Software may collect and transmit non-
proprietary data about those illegal copies. Data collected will not include any customer data created by or used in connection with
the Software and will not be provided to any third party, except as may be required by law or legal process or to enforce our rights
with respect to the use of any illegal copies of the Software. By using the Software, each user consents to such detection and
collection of data, as well as its transmission and use if an illegal copy of the Software is detected. No steps may be taken to avoid
or detect the purpose of any such security mechanisms.
Introduction
HyperWorks 14.0.120 is the newest version of Altair’s CAE software suite. It includes a large number of
new functionalities to support optimization-driven product design and predictive multi-physics analysis,
combined with a strong focus on usability and performance.
See the release notes for the following products:
HyperWorks Desktop Solver Interfaces
HyperMesh Abaqus Interface
HyperView ANSYS Interface
HyperGraph CAD Interfaces
MotionView EXODUS Interface
HyperCrash LS-DYNA Interface
Nastran Interface
Manufacturing Solutions OptiStruct Interface
HyperForm PAM-CRASH Interface
RADIOSS Interface
Engineering Solutions
Aerospace Engineering SimLab 14.2
CFD
NVH
HyperWorks 14.0.120 Release Notes 1
Proprietary Information of Altair Engineering

HyperMesh 14.0.120 Release Notes
General
Mechanism Tool
The Mechanism Tool, available in the RADIOSS and LS-DYNA user profiles, enables the modeling of
kinematic systems by the definition of kinematic assemblies (bodies) and kinematic joints. The
definition of the mechanism is made in a dedicated browser, with the Entity Editor for the related
mechanism entities (Mechanism, Body, Joint, Constraint). The usage of manipulators offers a
powerful user interaction with the mechanism.
This tool is especially useful for seat mechanism application, for which a kinematic coupling with a
dummy is possible. The Mechanism Tool can also be used to model any kind of kinematic system.
Dummy Positioner
A new Dummy Positioner is available in the RADIOSS and LS-DYNA user profiles, to position a
dummy interactively. The dummy positioner is now integrated in a new browser, with interactive
manipulation of the joint from the graphics. The Dummy Positioner is compatible with all LS-DYNA
and RADIOSS Humanetics dummies (encrypted or not) and also with LSTC LS-DYNA dummies.

ID Manager Updates
• XML comments and CSV Support
Import and export of ID Manager rules as XML comments in the solver deck is now
supported. A new ‘ID Rules’ check box is added in both Import and Export browser
tabs as well as in the Include View when you export an include file or all includes.
The XML comments are written as a separate block at the end of a solver deck
similar to connectors XML comments export.

You can also save ‘ID Rules’ in a CSV file directly from the ID Manager dialog. This
new setup is available in the context menu of ID Manager Dialog. Both Import and
export of CSV file is supported.
• Filtering Includes and Hiding Excluded Entities
The ID Manager dialog has added a Filter include file button that enables you to set a
filter on the available includes. The filter button will dynamically update the status
from default OFF to ON when filtering is applied.
You can also now hide excluded entities in the ID Manager dialog. The check box
works across the includes and hide entities from the dialog if they are shown as
excluded entities.
Both Include Filtering and Hide Excluded Entities settings can be saved and read
using the HM model and the solver deck, respectively.

Before applying Filter Include and Hide Excluded Entities settings
After applying Filter Include and Hide Excluded Entities settings
• Ability to organize associated elements while organizing solids geometry
• Warning message setting inside Entity editor for change in card image is now off by
default

Undefined Entity Support
Undefined Entity support is extended to Sets and Curves for all applicable User Profiles. In addition,
a warning message is displayed in the Import Process Messages dialog on the import of a solver
deck containing referenced entities.
Undefined Entities
The import and export of referenced entities is fully supported for properties, materials, sets and
curves. HyperMesh creates the appropriate entities and assigns a default Card Image upon import
of a solver deck containing referenced entities. In addition, a warning message is displayed in the
Import Process Messages dialog on the import of a solver deck containing referenced entities.
Undefined entities exhibit the same behaviors as defined entities; they are visible in all relevant
browsers and in the Entity Editor. The defined state, attributes, and Card Image can be modified as
per requirements of the user.
The renumbering of undefined entities is restricted to ensure references to entities that reside in
external Include files will not be invalidated.
Undo/Redo
Enhanced Undo Redo support which now includes additional panels, browser operations and
improved messaging.
DDAM Support
DDAM interface has been enabled via the OptiStruct user profile.
Include Export Options
The ability to control comments – HM, ID Rules, Part Assembly/Part, Connectors – has been added
within the include export operation from within the Browser Include view. These same options are
available via the standard export.
"Move to Include"
The Move to Include capability is now supported for the RADIOSS user profile in addition to Ls-
DYNA. The capability enables the component and all of it’s referenced and cross referenced entities
to be organized (moved) to the selected include or new include.

Organize Associated Elements Related to Solids
In the Organize panel, you can now select to organize the solid elements associated with solid
geometry.
Part Replacement Updates
Several updates were added including improved handling of meshless welds (connectors), improved
messaging, better support for *PART_COMPOSITE replace plus the resolution of several issues
including the direct property assignment to solid elements being lost post part replace.
Miscellaneous
• Count panel
The Count panel now has new widgets for counting topo points (vertices) and topo lines
(surface edges). This is in addition to the existing widgets for counting free points
(points) and free lines (lines).
• Improved Accuracy for mass calculation
New FIND CONNECTIVITY tool available to identify portion of a model that are not connected
Resolved Issues
• Missing option related to connector’s comments while exporting an include file.
• Saved Views in the browser are getting messed up after renumbering and reordering
components.
• Preserved nodes are unexpectedly getting selected during any nodes selection operation.
• Organizing a component to an include is not working consistently.
• Deleting unused sets from delete panel also delete the rigid bodies.
• Application crashes while using hm_createmark API for curves.

• Model Checker rerun automatically if you clear the session and reload the model again in
the same session.
• Export an include with relative path crashes the session.
• Mass value of individual Include file imported with master is showing wrong value.
• Fixed a refresh problem in the Solver browser that was not listing a newly created
system.
Model Build & Assembly
The Common Model workflow has been significantly enhanced with respect to Representation
Management and Configuration Management.
Representation Management Enhancements include the one click generation of all
representations, the introduction of the Representation Settings dialog for organization of user defined
representations and an Add Representation workflow which allows automatic loading of added
representation added in bulk and the filtering of associated representation files.
Configuration Management Enhancements include the introduction of two new HyperMesh entities,
Part Sets and Configurations, the former facilitating the logical grouping of Part Assemblies and Parts
and the latter facilitating the creation of user defined configurations. In addition, the introduction of
multi-pane views and an intuitive drag and drop workflow in the Part browser simplifies the creation
and organization of multiple configurations in a single HyperMesh binary file. Figure 1 shows a sample
BIW subsystem with multiple configurations.
Figure X: BIW Configurations
The image below shows Configuration multi-pane view in Part Browser for the BIW model.

Figure 2: Part Browser – BIW model
Connectors
CWELD Visualization
On the visualization tab in the connector chapter a special CWELD visualization can be activated.
The graphical representations reflect the different CWELD definitions.

Link Option Closest vs. Opposite for Area Connectors
The opposite link option has been utilized for the area connector realization. If activated it
ensures, that to both sides of the connector the closest link candidates are connected. The
parallelism of the opposite links is check and controlled by the definable normal projection
deviation angle. This option helps to realize in the desired way, if the seam is not precisely
positioned in the middle of the connected parts.
Absorption Enhancements
The complete absorption has been performance improved. Along this update couple new
mechanisms have been implemented:
ACM (general):
All regular ACMs will be absorbed as ACM (general) now. During the absorption three versions are
differentiated (shell gap, equivalence (T1+T2)/2), constant thickness). The connector get the
appropriate attributes assigned, which allows the same rerealization.
For certain situations there isn’t a clear identifier between shell gap and equivalence (T1+T2)/2. The
new option If hexa thickness type is ambigous decides about the preference.

Solid seams and areas:
The absorption of solid seams and area connectors can be more precisely controlled. It is clearly
differentiated between seams and areas, as well as between with head and without head.
Convert Connector Style Enhancement
In the context menu of the Connector browser, connectors of one specific style can be converted
into another one. This has been enhanced in a way, that additionally any connector lines can be
converted to seam connector lines and vice versa.

Convert settings control, if line connectors should remain as line connectors after the conversion or
if they are going to be converted to single point connectors pro each connector point.
Combine Connectors
In the context menu of the connector browser aligned single point connectors can be combined into
line connectors of the same style or several aligned seam line connectors into larger one(s).
In the combine settings an angle and a distance is defined, which describe the conditions for
combining single point connectors.

Split Connectors
In the context menu of the Connector browser, spot or bolt line connectors can be split into
individual single point connectors.
In the Split settings, it can be decided if the connectors should be unrealized along with the split.

Position Connectors
In the context menu of the Connector browser spot or seam connectors can be positioned to the
center position between the defined link candidates. The source position is stored on each individual
connector; hence moving back to the source position is possible, too.
In the position settings the selected connectors can be filtered down with respect to certain
attributes.
The position function works for single point as well as for line connectors.

Automatic Number of Layer Detection
In the Spot panel for connector creation and realization the number of layers can be set to auto
now. The precise number of layers will be detected during the link detection process and saved onto
each individual connector. A reasonable tolerance is essential, when using auto for the number of
layers.
Consistent Connector ID Handling During Import
For connector import overwrite and ID offset is supported now.
Resolved Issues
• Looped seam connectors created by nodepath were only visually closed.
• Weighting factors for the ACM (general) realization with radius option and normal
distribution was wrongly calculated.
• Inactive components weren’t ignored during absorption.
• For CWELDs GS (point to face) the GS node wasn’t equivalenced to the link.
• The connector XML import for big area connectors led to a crash.
• Several attributes in the Connector Entity Editor were not available.
• In certain cases bad hexa elements have been created for adhesive seams in combination
with discontinuity.
• Seam snapping behaved wrong in some scenarios.

• For more complex shapes the area connector has been created wrongly.
Geometry
Dimensioning
The Dimensioning tool has undergone significant changes to improve the workflow and the usability.
A new Feature entity has been added, which allows defining, storing and manipulating relevant
geometric dimensions in the model from within the browser, and via Tcl APIs. In addition,
dimensions can also be parameterized via the parameter entity, as well as linked together via
parameter entity expressions. This allows for easy design optimization iterations with HyperStudy.
Previously, the dimensions only existed and could only be controlled within the Dimensions panel.
General improvements have also been made to the robustness of the tool.
Geometry Match Topology
This tool, accessed from the Geometry menu, fixes gaps between stitched edges and vertices to
make the actual geometry of the surfaces consistent with the model topology. It checks the topology
of the model for gaps that are larger than a given tolerance between shared, non-manifold, or
suppressed edges. If a gap is found to be bigger than the specified tolerance, then the surface and
edge geometries will be morphed parametrically and in 3D, if necessary, to make the gap smaller
than the tolerance. In addition, non-essential degenerate edges are removed.
Trim with Lines
In order to increase the performance of the Surface Edit > Trim with Lines > With Lines panel for
aerospace use cases where many free lines are being used to trim surfaces, a few improvements
have been made:
• Implemented choices for the type of line to use as input, so that the user can easily select
only free lines (default), only surface edges, or any lines.
• Changed the default maximum projection distance to match the geometry cleanup
tolerance (previously the default value was zero).
• General improvements to the trimming performance.
When utilizing these options together, improvements on the order of 30-40% may be seen.
Surfaces Normal from Edges
A new subpanel Surfaces > Normal from Edges has been added. This allows the creation of surfaces
by dragging lines along the normal of their adjacent surfaces. This is useful for creating ribs and
spars in aerospace models.

For shared and non-manifold edges, the surface normal is taken from the surface of the master
edge. In the event the neighbor surfaces are tangent enough to each other, the average normal is
instead used. Adjacent surfaces are properly trimmed and stitched together to allow for a simple
one-step process.
Miscellaneous
• The geometry feature angle can now be specified between 0-180 degrees for face
selection, instead of being limited to 0-90 degrees.
• The duplication of surfaces now properly maintains any suppression of fixed points from
the original surface to the duplicate.
• Metadata is now maintained and propagated when performing surface offset and
dimensioning.
• Suppressed lines are now supported for selection "by path".
• The Surfaces > Meshline subpanel has been fixed to resolve multiple issues and crashes.
Resolved Issues
• Resolved an issue with CAD metadata handling causing a crash on HyperMesh binary save
and/or load. After merging two or more CAD files containing metadata into the same
session, saving the HyperMesh binary file would potentially result in a crash. If the save
was successful, those files would potentially crash upon load. These issues have all been
resolved. Any existing binary files that exhibited the crash due to this issue can also now
be successfully loaded.
• Resolved an issue where under certain conditions, an invalid topology was created during
CATIA composites import. This would potentially lead to a crash upon saving or loading
the HyperMesh binary file. These issues have all been resolved. Any existing binary files
that exhibited the crash due to this issue can also now be successfully loaded.

• When trimming surfaces that had suppressed edges, sometimes the suppressed edges
would become unsuppressed, or would have vertices created at the trim line locations.
These issues have both been resolved.
Meshing
BatchMesher
• Updates have been made to improve the meshing of flanges. These include:
− Suppressing unnecessary input edges to improve mesh flow
− Preventing the addition of unnecessary trim lines that may disturb mesh flow
− Removal of narrow elements that disturb the mesh flow
− These enhancements do not require any changes to the param file
• The ability to defeature fillets has been added to the surface fillet table. This allows for
the removal of fillets that fall within certain ranges. Additionally, special geometry
cleanup is performed after defeaturing in order to cleanup any unstitched edges, and to
patch any holes or gaps.
• Plot elements associated to surface edges are now maintained and used for connectivity
within BatchMesher, instead of being deleted. Other 1D element configs were previously
supported.
• When the mesh type is set to trias, the meshing of rectangular surfaces no longer results
in a majority r-tria mesh.

• Miscellaneous minor bug fixes related to the feature recognition and capture of beads,
fillets and holes.
Geomechanics
A new detach capability, useful for creating faults for geomechanics, has been added which allows
detaching elements from the nodes of wall elements. This is available via the Detach > From Wall
subpanel.
The elements surrounding the wall must be one dimension higher than the wall elements. The
elements surrounding the wall can be classified as belonging to different clusters based on which
side of the wall elements they appear. For each cluster of elements attached to the wall, the shared
nodes are duplicated after detachment.
Options are also available for offsetting the nodes of the detached elements, as well as also
detaching the free ends of walls.
Seed Node Based Volume Selection
The Volume Selector in mesh controls allows you to select volumes based on enclosed seed node.
You can define fluid volume and solid volumes by selecting enclosed seed node. Also, you can define
which volume should be skipped by selection enclosed seed node.
You can also define index of the volume to be meshed as largest, 2nd largest, etc.
Elements Based Surface Deviation in Panel
The Surface Deviation method for element remeshing can be accessed now via the Automesh panel.
It captures curvature and provides smooth transition from small size elements to big size elements.
A new mesher internally identifies the elements features based on defined feature angle and
captures/refines them.

New Imprint Panel Options
• Option to create patch in imprint:
A new is available in the Imprint panel which creates a patch between imprinted edges.
This enables you to retain the inputs as they are and create patches in-between rather
than merging them.
• Option to select nodes as source:
You can now can select nodes as source in the Imprint panel. This enables you to imprint
nodes on edge to imprint on element faces without creating 1D elements.
Miscellaneous
• Added support for bar3 element creation in the Line Mesh and Linear 1D panels.
• The Preserve Edges tool can now be accessed directly from the Autocleanup panel and
the Automesh > batchmesh/QI subpanel.
• Element normals can now be adjusted using a reference vector direction within the
Normals panel.

• The connectivity between 2D element edges and 1D/3D elements can now optionally be
maintained in the Elem Cleanup panel.
Resolved Issues
• Mesh controls feature-based meshing issues related to several crashes,
incorrect/incomplete fillet meshes, and mesh connectivity problems when using
standalone feature-based meshing (without other HyperMesh mesh controls) have been
resolved.
• When creating a mesh in the Line Mesh panel and specifying an orientation node, all
beam elements in the model were being updated to have this orientation node. That has
been resolved.
• When using QI or BatchMesher meshing with the mesh type set to trias, the meshing of
rectangular surfaces no longer results in a majority r-tria mesh.
APIs
CAD Import and Export
All CAD import and export options can now be specified on the command line via the new
*geomimport and *geomexport commands, as well as within the respective .ini files. This allows
for complete customization of the CAD import/export behaviors from within a Tcl script.
When legacy commands *geomoutputdata, *geomoutputdata2, *iges_write or
*iges_write_units are executed via scripts, *geomexport will be written to the command file
instead.
Command File
The HM_COMMANDFILE_MODE environment variable has been enhanced. When using UNIQUE
mode, the user name is now also included in the command file name, to further guarantee
uniqueness and to allow for better traceability.
Face/Edge Selection and Node Lists
New options have been added to *createmarkpanel and *editmarkpanel:
• New node face/edge selection modes free edges ext (6) and edge ext (7) for
face_edge_mode.
• New filter option for specifying only specific selection modes to allow.
In addition, hm_formnodelistsfrommark has been added for converting a mark of nodes into one or
more node lists.

Thin Solids
A new API hm_getgeometricthinsolidinfo has been added for finding thin solid geometries, and
returning information such as the estimated thickness and the master, slave and thickness surfaces.
Decimation
Decimation APIs has been added to this version. Decimation APIs enables you to decimate (coarsen
mesh) while retaining topological shape as it is while reducing element count. It will automatically
detects curvatures and retain them. A new capability to define localized wrap settings via the Mesh
Control browser is available. Local controls will take the precedent over global settings.
Resolved Issues
• Resolved an issue with the hm_framework removetab API in HyperMesh Desktop.

Previously, any user-created frame would be destroyed during this call. This was
inconsistent with HyperMesh standalone, where the frame would not be destroyed. An
additional flag has been added to support also keeping the frame for HyperMesh
Desktop.

HyperView 14.0.120 Release Notes
Highlights
Highlights of this release include an addition of a new measure type to compute shortest distance
between two entities, graphical in-place editing of legend, a new graphical slider on the legend for iso-
plots, and some general enhancements and bug fixes.
Minimum Distance Measure Type
A new measure to calculate the shortest (minimum) distance between any two entities during a
simulation is added. The entities can be nodes, elements, or components. If elements/components
are picked on the “To” side, HyperView will take into account the surface of the element when
calculating the shortest distance. As the animation is played, the graphics will be updated to show
the shortest distance. Additionally, users can plot this measure in a HyperGraph window similar to
other measure types.
For fastest calculation, use node sets. If more accuracy is desired, pick element or component sets
and in this case, the time taken to calculate distance through one cycle of animation is directly
proportional to the size of the sets.
General In-Place Legend Editing
The HyperView legend is enhanced to allow users to edit values and colors of the legend by just
clicking on it and changing it in-place instead of using the Edit legend dialog.
A context menu is also available on right clicking the legend, to let users modify other attributes of
the legend such as format, location etc.

Graphical Iso-Slider On Legend
This enhancement gives users a quick and convenient way to create & control iso-plots. Simply use
the legend context menu to add an iso-plot that is based on the contour settings and then move the
graphical slider on the left side of the legend up and down to control its display. The threshold value
and mode of the iso-plot can be changed in the Iso section of the legend.
General Enhancements
• HyperView Player is enhanced to allow users to change the animation mode (e.g.
transient to modal or transient to linear).
• Utility to extract assemblies from LS-Dyna input deck is enhanced to support include files.
• New report template parameters for parametrizing display attributes such as mesh mode
and views at a model level is provided.

• New preference menu option to retain the rotation center even when it is moved off the
screen is added.
Resolved Issues
• Differences in contour plot display between HyperView and HyperView player due to
absence of accelerated graphics option in the player. Accelerated graphics is now enabled
in HyperView player.
• Max of Window template expression in Note does not provide correct results when results
with corner data is plotted.
• Notes when exported in a H3D come back on top of each other on re-import.
• Time Synchronization information is not saved for videos.
• Graphics issue when section cut is created on solid elements.
• Edge lines are shown on wrongly connected Penta6 elements.
• Long time to open model files containing a large number of duplicate nodes.
• Application error when opening H3D files with non-English characters in the path or file
name
Solver Interfaces
• UNV reader enhanced to read Nodal Stress Results
• OP2 reader enhanced to read intermediate results from Nastran SOL400 analysis
• LS-Dyna reader option added to support decreasing time (e.g. Implicit Simulation)
• OP2 reader enhanced to read results from NX Nastran SOL111 analysis
Resolved Issues
• Incorrect values when plotting complex results on composites in OptiStruct op2 file.
• Application hang when plotting composite stress/strain results in OP2 Results file.
• Incorrect Composite strain results shown when plotting Abaqus ODB files

HyperGraph 14.0.120 Release Notes
Highlights
The HyperGraph Plot browser is updated with a new string-based filter, which supports keyword-based
searches and Boolean operations. This allows filtering using entity properties of curves, axis, etc. in
combination with newly introduced page and window properties. Particularly, the editing of large
session files will become much easier. Drag & drop has been added to the plot browser for faster
repositioning of curves, together with new context menus to isolate / reverse-isolate curves.
CSV files can be loaded as documents in TableView so that they appear as parameters in report
templates, similar to the open document feature in TextView. Using overlay areas in TableView allows
the user to append rows or columns with cell values from CSV files by overlaying report templates.
PowerPoint Publishing allows more control with respect to defining the size of the exported images or
movies on Windows. As was implemented for LINUX in the previous release, an algorithm was added to
keep the image aspect ratio when synchronizing modified PowerPoint presentations. New APIs are
added which allow customization of all PPT Publishing features.
Plot Browser
• String-Based Filtering: The string-based filter functionality allows the user to add
keyword-based searches and Boolean operations; braces can be used to modify the
search string. Keywords and search values for all entity properties can be graphically
added by using the context menu in the property tables. Previous searches are stored in
the drop down list and can be reused within the current session. The combination of
entity and page/window properties make it much easier to handle large files. Typical
examples would be searching for all horizontal axes in XY plots, and ignoring bar charts
and complex plots

• Drag & Drop: The Plot browser curve view now supports dragging and dropping of
curves, which is a faster way to perform the existing cut-paste feature. This allows easy
positioning of multiple curves behind a dedicated curve, which was previously only
possible for single curves in the Define Curves panel.
• Isolate/Reverse-Isolate: Similar to HyperView, the Plot browser now allows isolate /
reverse-isolate only in the curve view. Because the Plot browser allows selections over
multiple pages and windows, the options “per window”, “across pages” and “across
session” are added. Using “per window” will only isolate curves in windows where at least
one curve is selected; all the other windows will not be affected. “Across page” works
similarly for the entire page. If the user wants show only the selected curves for the
whole session, “across session” needs to be selected. Isolate only will show only the
curves; all other entities (notes, axes, headers etc.) will be hidden

• Page / Window Properties: The following new page and window properties are
accessible in all views of the Plot browser and can be used for filtering:
TableView - Support for Excel CSV Documents
By loading CSV files via File > Open > Document into TableView, a link to the Excel file is saved to
the session file or the report template. Changes to formatting (borders or fonts, for example) and
any conditional formatting rules that you have defined in TableView are restored when you reopen
the session file or report template; only the values will be updated from the linked CSV file. Using
overlay areas in report templates allow the user to overlay multiple times and append rows/columns
in which the cells are formatted according to the same rules used at the first import.

PowerPoint Publishing (Windows Only)
On Windows, two more options to define the picture resolution have been added. Using the newly-
added scale factor to the PPT Presentation resolution, which was the default in 14.0.110, makes it
easy to control the proportion of text/labels in axes and legends in relation to the images in the
PowerPoint presentation.
Using the Fixed Resolution allows the user to define either the image height or width and the aspect
ratio of the PPT master template. The PPT Publishing ensures that, for syncing, the image
dimensions will be the same in PPT as long as the user uses the same settings saved by HWD at the
time of the initial export.
The HyperWorks Desktop area resolution captures the images as they are displayed on the screen
and fits them proportionally into the PowerPoint window with the first export, maintaining the aspect
ratio.
Interfaces
• Support of NODOUTHF and ELOUTHF ASCII files from LS-DYNA
Resolved Issues
• The unit support for the HIC function in the VST Pedestrian Impact tool has been fixed;
the values are no longer zero.

• For some NASTRAN-generated PCH files with line numbers, the imaginary values were
wrong. This bug has been fixed.
• The filtering for horizontal or vertical axes in combination with the plot type has been
improved.
• The page title will now only be updated the first time a curve is loaded via the Build Plots
panel; in previous versions, changes made in the page title where overwritten.
• Line segments in Bar Chart lines are now displayed even when they are partly outside of
the GUI.
• PPT Publishing offers new features to control both the font size of legends/labels and the
aspect ratio of the exported images (see above for details).
• In PPT Publishing, broken links to images or text fields are again displayed in red when
using the “View Names” feature in the ALTAIR PowerPoint plug-in. This feature was
broken in previous versions.
• Reading SECFORC *DATABASE_CROSS_SECTION group results from LS-DYNA BINOUT
files no longer show random numbers instead of the section name as requests in the Build
Plots panel.
• Missing documentation for the Flexible Report APIs has been added.
• Copying and pasting pages or windows no longer changes the axis units for Dyna result
files.

MotionView 14.0.120 Release Notes
Highlights
Non-linear Finite Elements
Version 14.0 introduced the experimental feature “NLFE Body” which enables you to model non-
linearly flexible components in your multibody system. Version 14.0.120 marks the formal release of
the NLFE.
A generic NLFE Body can be created using either the BEAM or CABLE element. The NLFE Body is
based on the Absolute Nodal Coordinate Formulation (ANCF). Nonlinearity can occur for two main
reasons: (A) Geometric nonlinearity and (B) Material non-linearity. The NLFE body supports both.
Refer to MotionView User Guide and MotionSolve Reference Guide for more details.
The NLFE features available in earlier version have certain improvements.

• MotionView now supports providing number of fibres information for Cable elements
• An additional set of constraints CONN0 are introduced by default at NLFE grids that are
associated with markers to rigidify the grid. The constraints are of the form <CONN0 id =
“conn_id” gid = “grid_id” conn = “TTTTTT” />. The statement constrains the
gradient vector. First 3 keywords ‘T’ in the conn attribute represents constraint on the
gradients along X, Y & Z direction while the remaining 3 ‘T’ represent constraint in the
rotational (shear) direction. The form of these constraints can be changed using an
environment variable HW_NLFE_CONN_TYPE = ssssss, where s can be either ‘T’ or ‘F’
Subsystems
Version 14.0 introduced “NLFE Subsystems” in an experimental form along with the NLFE body. The
NLFE Subsystem contain tools to create an NLFE based stabilizer bar and helical spring. In this
version, the toolbar “NLFE Subsystems” has been renamed as “Subsystems”. Along with NLFE, the
experimental tag on the Subsystems is also removed. In addition, a belt pulley system creation tool
is made available.
Belt Pulley System

A belt-pulley system can now be assembled quickly using the Belt-Pulley Subsystem tool available
within the Subsystems toolbar
Two types of belt modeling methods are now available
1. NLFE – the belt is modeled as an NLFE Body

2. Discretized rigid bodies –the belt is approximated to a series of rigid bodies connected via
spring-damper forces

Known limitations
• NLFE Belt pulley currently can only be used where the belt-pulley plane is parallel to the
Global XZ plane
• Once the system is created, the belt modeling method cannot be toggled.
• Discretized rigid bodies Belt pulley system consists of a large set of entities. Creating or
working with this system could be slower
Unit Support to Material Properties
MotionView now handles unit conversions automatically on Material Properties. The properties in the
Materials dialog display the values in the Solver Units that are selected. Mass-inertia & CG properties
of rigid bodies that get their properties from primitive graphics or CADGraphics and NLFE Body get
updated automatically when units are changed.

Ellipsoid Graphics Support
It is now possible to define an ellipsoid graphics in MotionView that can be used with MotionSolve
and Adams.
Resolved Issues
• An app error with the expression builder when an entry field contains improper function is
fixed.
• An application crash associated with the usage of curly braces in the location function
loc_along_dir has been fixed.
• An issue with resolving point for orientation of tire graphics has been resolved.
• Mass-Inertia of CADGraphics (and thereby their parent body mass-inertia) were not being
updated immediately when property of materials referenced by CADGraphics were
changed. This issue has been fixed.
• An issue with components of inactive File Graphics not being read when they are
activated is resolved.
• While importing CAD, MotionView now uses the underscore (_) that might exist in the
component names while assigning a varname.
• An issue with the macro “Export MDL” in HyperMesh to generate an h3d has been
resolved.
• A regression in v14.0.110 in the 3D Cartesian Curve where the curve was being displayed
by default in the Global Frame has been resolved.
• An issue with CG inertia summary where the dialog closes when using the Return key
after an entry has been fixed.
• A crash while assigning material to a system attachment is resolved.
• The MNF to H3D conversion in flexprep has been enhanced to calculate inertia invariants
for MotionSolve. MotionView will now show FEM Inertia Properites for the flexible body
with the newly converted h3d from mnf.

• A minor enhancement to the Assembly Wizard GUI now provides the ability to skip the
Attachment Wizard after selection of systems.

HyperCrash 14.0.120 Release Notes
Highlights
GUI Enhancements
• Group Selected Rows – most of the panels allow you to pick parts in the display and
retrieve linked objects in the panel list. When several objects are found, right clicking in
the panel and selecting Group Selected Rows will move all found objects at the top of the
list.
• Advanced Search Option – Per default, search By ID is selected.
• Into selection capabilities list, involving part selection, Add and Remove selected parts
of Browser is now available (selection from part, subset, include, submodel, view)”
Model Browser
• Invert Selection for a single entity type – select entity, right mouse click and select
Invert Selection
• Find Connectivity for a selection of part or assembly. This option is also available from
the Part generic panel
Part Replacement
• Connection information like coordinate system for bolts or time history for all type of
connection are now kept and updated during replace process
Session Recording
• Support of mass balance operation
• Improvement on dummy positioning recording and positioning file export is now

supported
• Support of replace part options
• Support of Spit Part operations
• Support of move Node/Part operations.
Solver Conversion
• Improvements done for Nastran to RADIOSS conversion.

RADIOSS User Profile
• Model Browser – Ability to convert automatically any /GRNOD subtypes to a
/GRNOD/NODE
• Section panel – Default mode of creation set to “Simplified”
• Transform Panel – Matrix fields are now exposed for /TRANSFORM/MATRIX
• Sub-Modeling – Improvements in export process
• Transformations can now be deleted and toggled ON/OFF from the Model Browser
• Improvement of move and copy operation for child entities
Keyword Support
• RADIOSS 14.0
− /SURF/DSURF
Contact Check
• New contact check algorithm taking into account Irem_gag=2 in /INTER/TYPE7
Connections
• Improvement of BOLT connections information storing/reading/realization via M00 file
Model Checker
• General check to detect empty objects
• Improvement of Incompatible Kinematic Conditions detection when skew is used

• Check if Parameter and “&” in card title is used
• Check if card title start with “/”
• Check for missing master node in RBODY and RBE2 and reference slave node in RBE3
• Check ply thicknesses in /PROP/TYPE19 and /PROP/TYPE17
• Check function slope for /MAT/LAW59

LS-DYNA User Profile
• Mass calculation improvements
• Ability to automatically switch a shell PART to PART_COMPOSITE – right click on a part in

the part panel and select Change Subtype > PART_COMPOSITE
• Ability to select a nodal rigid body PID in *INITIAL_VELOCITY_RIGID
• Ability to switch a TETRA4 to a TET4TOTET10 from Solid element panel
Keyword Support
• MWD option in *ELEMENT_MASS_PART_SET
• POINT and POS6P in *DEFINE_TRANSFORMATION
• IPBACK parameter in CARD E of related *CONTACT_TIED
Contact Check
• New contact check algorithm taking into account SSTHK and SOFT=2
• New options for Check Thickness Collision of Tree Selection – with set-up in Options >
Preferences
− Default (if not specified in installation mcrash_preference file, uses “Automatic” option)
− Reduce thickness to 40% of element size (old behavior)
− Full thickness but ignore neighbors (in case thickness > element size)
• Automatic (combination of previous two options)
Safety Tools
• Seat Deformer – Ability to generate a LS-DYNA input deck for the pre-simulation and Pre-
simulation Parameters for Seat Deformer are updated accordingly.

HyperForm 14.0.120 Release Notes
Highlights
HF Director has been introduced in this release to complement the existing User process and Auto
process with a simplified interface to setup incremental forming model from CAD for RADIOSS
interface. It allows you to setup a model for single stage and multistage forming of the standard or
user defined process with minimal user interactions.
Multistage Manager
Support for modeling progressive die forming with option to translate the blanks between the
stages.
Option to define constraints on the blank in addition to symmetry.
Batch Nesting and Results Initializer
The HTML report has been enhanced with following new options:
• A summary page containing nesting results for all the parts submitted for batch nesting.
• Report for individual parts updated with new layout and additional information including
− Draw direction
− Formability results: % thinning and FLD
Export of nested shape, fitted shapes as a .iges file
Drawbead
Support for drawbead height in RADIOSS incremental model setup.
Option to delete drawbeads from the User Process browser.
Resolved Issues
• Blank nesting tool GUI not automatically adjusting to screen resolution.
• Triple action drawing process model step up using User Process.
• Gravity model setup using solid blank in User and Auto Process.

Aerospace 14.0.120 Release Notes
Bar/Beam 1D
Bar/Beam 1D source elements to 2D / 3D target element mapping.
Resulting thermal distribution on 2D elements
3D Source Elements
3D Source elements to 2D or 3D target elements including higher order source elements.

New Mapping Algorithms (for discrete/csv data only)
• Triangulation XYZ points based csv file based source data before mapping and using
linear shape functions mapping (2D/3D target elements)
• Inverse distance weighted mapping
• Mapping target nodes falling outside the source elements using close point approach and
the nodes falling inside the source elements using shape functions
Generic Field Mapping

Generic field mapping using matrix columns (source data) and mapping to a new HW table for the
target elements and exporting this table to Excel using matrix.
Transform/Review of Source Nodes/Elements Data
Transforming and reviewing of source nodes/elements data before mapping to the correct target
elements.

Nodal Force Balance
Nodal Force balance mapping using OptiStruct to ensure the mapped target nodal forces and source
nodal forces are in equilibrium.
Source model nodal and mapped using OptiStruct to a new target mesh with force balance

Target mesh nodal forces and moments from source nodal forces with equilibrium
Rutman Rivet Connection

A new connector type is added to Automate rivet creation from a CSV file.
This is an extension of the Hilock connection from connectors.
Renumbering Based on Element Adjacency
New element and nodal renumbering function is added.
This function requires users to select start element (or node) and adjacent connected elements (or nodes)
to indicate primary and secondary directions. These elements needs to be connected.
Limitation of this method: This method works only with quadrilateral elements (without any triangular
elements) and should have a mapped (regular) pattern.

HyperView Interface
An Aerospace Tools profile has been introduced to provide following functionalities:
• Composite
− Results On Stack
− Layer Book
• Report
− Result Configurator
• Matrix Browser
Loading the Aerospace Tools Profile
1. From the File menu, select File > Load > Preference File. The Preference dialog is displayed.

2. Select Aerospace Tools and click Load. The Aerospace menu is displayed on the menu bar.
Result on Stack
The Result on Stack tool allows the user to display layer based shell results along the real stacking
sequence of the selected element(s).

Result on Stack tool support the following solver profiles:
1. OptiStruct (zone and ply based)
2. RADIOSS
3. Nastran
4. Ls-Dyna
5. Abaqus
Report Configurator
The Report Configurator tool enables you to quickly create either a Word document or pictures.
This option will generate a new chapter for each selected results. Each chapter will have a
subchapter for each selected load case which then will have again a dedicated subchapter for each
selected parts.
Export Pictures
With this function, after selection of the configuration, you can input a destination directory in which
the tool will create a subfolder for results then a sub folder for each load case and then an image for
each selected part/set.
For example, this configuration:

Will generate the following folder structure:

CFD 14.0.120 Release Notes
General
Multiple Normal for Boundary Layer
Option to define multiple normal on sharp edges and baffles. Meshing engine will automatically
identify the candidates for multiple normal based on user given threshold angle.
Faster Intersection Check
Improved performance of intersections checks in CFD Tetramesh panels. The new enhancement
allows for checking intersections in the input efficiently. It also shows duplicate, folded and close
proximity elements. You can now perform intersection checks on per volume basis or on all inputs.
Resolved Issues
• Feature based meshing issues: Resolved issues related to fillet controls, number of layers
and connectivity.
• Wrapper projection issues: Fixed some projection issues in wrapper.

Abaqus Interface 14.0.120 Release Notes
Table Entity
• A new Distribution table to define the density in the material card is available. Similar to
other tables, this can be accessed via the Solver browser. You can import or export data
into the table.
• The *Material keyword is updated to accommodate the Density Table. This is not a default
option; you need to toggle on the Distribution Table option to pick a *Density Table.
• For the table entity, you can import/export external files by right clicking on the table
area.
NMAP Import Option
• New solver import option to resolve NMAP node type to coordinate. This is not default
option. If this option if OFF, all the data goes to unsupported.

New Keyword Support
• *Random Response
• *CORRELATION
• *PSD-DEFINITION
• *Hypoelastic
• *BOND
• *DAMAGE INITIATION
• *GLOBAL DAMPING
• *DAMPING CONTROLS
• *IMPEDANCE PROPERTY
• *INCIDENT WAVE INTERACTION PROPERTY
• *UNDEX CHARGE PROPERTY
• *CONWEP CHARGE PROPERTY
• *ACOUSTIC MEDIUM
• *ACOUSTIC WAVE FORMULATION
• *BEAM FLUID INERTIA
• *Potential
• *Deformation plasticity
• *Cast iron plasticity
• *Cast iron hardening
• *Cast iron compression hardening
New Element Support

• ACIN3D8
• ACIN3D6
• C3D4P
• C3D6P
• C3D8P
• EC3D8RT
• CPEG4R
• CPEG3
• CAXA8RH4

• CAXA8R4
Conversion Enhancements
Nastran to Abaqus Solver Conversion Enhancements
• Conversion of RBE3 to COUP_DIS.
• Conversion of .tic (velocity) to Abaqus (velocity)
• PBUSHT KN referencing TABLED1 is converted to CONNECTORSECTION &

CONNECTOR_BEHAVIOR and TABLED1 is mapped to CONNECTOR PLASTICITY.
• Multiple bug fixes
OptiStruct to Abaqus Solver Conversion Enhancements

• LOADADD card conversion and mapping of the load collector to respective load case.
• GRAV load conversion from OptiStruct to Abaqus

ANSYS Interface 14.0.120 Release Notes
Enhancements
• Ply based composite modeling is now available for ANSYS solid HEX8, PENTA6, HEX20 and
PENTA15 elements for element types: SOLID185,SOLID186,SOLID278,SOLID279 And
solsh190.
• POST: ANSYS result reader now supports results for SURF251 and SURF252 element types.
Resolved Issues
• Issue with performance of export of ANSYS models with “displayed” option is now fixed.

CAD Interfaces
Highlights
Import and Export Options
All CAD import and export options can now be specified on the command line via the new
*geomimport and *geomexport commands, as well as within the respective .ini files. This allows
for complete customization of the CAD import/export behaviors from within a Tcl script. Future work
will include exposing all of the options within the GUI.
SolidWorks and NX Third-party Reader Robustness
SolidWorks import, and NX import via the third-party reader, have been significantly improved via
the use of native Parasolid libraries.
Scaling of CATIA Infinite Planes

Infinite planes are now sized relative to the model size during import. The default sizing is 5%, and
this can be customized via the @InfinitePlaneSizeFactor option in the ct_reader.ini file.
NX Native Reader Improvements
• ExtAPI and cadassm are now supported for this reader.
• ORIGINAL_ID metadata creation is now supported. This is controlled by the

@OriginalIdAsMetadata option in the ug_reader.ini file.
• Geometry created via the WAVE geometry linker can now be imported. This is controlled
by the @ImportWaveLinkedGeometry option in the ug_reader.ini file.
Metadata Export
New options have been added for controlling which metadata is exported, based on a prefix
(@MetadataPrefixFilter), and whether that prefix should be removed during export
(@RemoveMetadataPrefix).
Resolved Issues
• Resolved an issue with CAD metadata handling causing a crash on HyperMesh binary save
and/or load. After merging two or more CAD files containing metadata into the same
session, saving the HyperMesh binary file would potentially result in a crash. If the save
was successful, those files would potentially crash upon load. These issues have all been
resolved. Any existing binary files that exhibited the crash due to this issue can also now
be successfully loaded.

• Resolved an issue where under certain conditions, an invalid topology was created during
CATIA composites import. This would potentially lead to a crash upon saving or loading
the HyperMesh binary file. These issues have all been resolved. Any existing binary files
that exhibited the crash due to this issue can also now be successfully loaded.

EXODUS Interface 14.0.120 Release Notes
Highlights
This release supports the EXODUS-Sierra_SD interface on the Linux 64 platform.
Resolved Issues:
• Review of loads in the BR3 browser is different than in the panel.
• "BC Entities" option is missing in the Count panel.
• Application crashes when exporting a file.

LS-DYNA Interface 14.0.120 Release Notes
Highlights
• A new entity is introduced to properly support the LS-DYNA *CONSTRAINED_RIOGID_BODY
Keyword in HM. In addition a dedicated browser was added for improved usability.
• HyperMesh can now create a seatbelt of only shell elements. No 1D elements will be created
at its end specifying 1D length = 0
• The support of Parameter is now extended to all the attributes used for LOADs, with the
exception of scale factor that when parametrized will be converted in import to its actual
value. Increased robustness in reading deck when the imported file has incorrectly less than
the expected number of lines as the manual requires
• Xtranode on non rigid part is now detected in model checker
• Support for MWD option of *ELEMENT_MASS_PART_SET IN LS-DYNA
• Add table option for Qi in *MAT_ADD_EROSION

• Define box and database cross sections are now properly translated according to the
translate option in *Define_Transformation.
• Update for SOFT card parameter entry in *MAT_ENHANCED_COMPOSITE_DAMAGE for LS-
DYNA
• New element formulation ELFORM = 45 in *SECTION_SOLID in LS-DYNA
• Better handling of Connectors (FE-Absorb) for Meshless welds during part replacement
support for encryption for the following LS-DYNA materials:
*MAT_MODIFIED_PIECEWISE_LINEAR_PLASTICITY ; *MAT_GURSON;
*MAT_MODIFIED_HONEYCOMB
• New check added to identify parts of *Constrained_Rigid_Body where the distance between
its part exceed a used defined value
• Mass from *PART_COMPOSITE is correctly calculated in the post summary component tool
• HM can now export models with more than 500 include files
New Entity for *CONSTRAINED_RIGID_BODIES
The keyword was originally mapped to a HM “group” entity that was shared with other keywords such
contact and rigid walls. It is now mapped to new independent entity with its own Icon and Graphic and
ID. The following behavior is implemented:
• Removed any ID renumbering that occurred when a constrained rigid bodies shared the same
ID with other “group entities”.
• Such keywords in import are now automatically mapped to the new entities without loss of
data

• When reading an HM file created in previous versions, these keywords will be mapped to the
new entity without loss of data.
A new graphical representation is added to facilitate the identification and selection of such entity in the
graphics. The new graphic shows the master and slave parts connected through a dotted line drown with
the color of the master. Moreover in the Solver Browser a specialized review is also provided.
From the Solver Browser the user also has access to a new CRB Hierarchy tool. To access the tool, right
click on the constrained rigid bodies folder.
CRB Hierarchy browser lists all the constrained rigid bodies available in the model, with information over
its master and all its slave parts. The tool will show all the slave parts associated to the same master rigid
under a single entity.
In addition all the rigid parts that are not linked to constrained rigid bodies entity are also listed in the
CRB Hierarchy tool to facilitate the creation and\or modification of such such entity. The CRB entity can
be modified through drag and drop of parts in such browser.
Right click on an existing constrained rigid body entity to add a rigid part from the master component.

A new constrained rigid body can be created by dragging the component(s) design as slave onto the
component that will become the master of the newly created constrained rigid body.
Removing a slave part(s) from a constrained rigid body is also possible by selecting the slave part(s) and
clicking on remove. You can also right click on the master part and remove all its slave part(s) from such
constrained rigid body.
New Keywords
• *MAT_LAMINATED_FRACTURE_DAIMLER_CAMANHO (MAT-262)
• *BOUNDARY_PRESCRIBED_ACCELEROMETER_RIGID
• *CONTROL_THERMAL_TIMESTEP
Resolved Issues
• Solved Issue in I/O for *ELEMENT_SEATBELT_SENSOR where the NID field was getting
lost.Fixed a problem in Transformation Tool where the Start ID for elements was not
honored.
• Fixed an issue with joints encountered updating 1d Elements. HM is no longer converting
all joints into joints of type spherical
• HM no longer export *SET_SEGMENT_GENERAL incorrectly. HM was not properly setting
the OPTION field before.
• The error check for constrained_joint_revolute was not detecting all cases of not
coincident nodes
• The transformation tool now correctly renumbers the ID of elements

Nastran Interface 14.0.120 Release Notes
Highlights
Solver Conversion Enhancements
LS-DYNA > Nastran(MSC)
• *SECTION_BEAM converted to PBAR/PBARL
• *ELEMENT_INERTIA converted to CONM2
Dyna to Nastran Solver Conversion Enhancements

• Conversion of *SECTION_BEAM to PBAR/PBARL
• Conversion of *ELEMENT_INERTIA to CONM2
PARAM Card Addition
• PARAM, CLOSE
• Remove blanks on GRID, CQUAD4 and CTRIA3
• Export material list as csv file in material table
• BCPROP can be referenced in BCBODY1
HyperView Reader Enhancements
• Composite stress and strain results support
• Intermediate results support from op2 file generated by SOL400
• Support of op2 results generated by SOL111 in NX-NASTRAN
Resolved Issues
• CBUSH vector lost while reading legacy HM files
• OFFT field in CBEAM card not updated correctly
• Assign property on element during import fails for CBEAM elements
• Analysis set to STATIC when it is NLSTATIC for SOL400
• BOUTPUT is not recognized in subcase section due STEP card


• Missing PID on CBUSH when importing .bdf as INCLUDE
• Issue with PDAMP definition in DVPREL
• Application error during RSSCON creation

OptiStruct Interface 14.0.120 Release Notes
Highlights
Optimization entities are supported in the Entity Editor. The Optimization view is enhanced to support
show/hide/isolate and cross reference features for optimization entities. Solver conversion from Abaqus
to OptiStruct has been enhanced to support element wise convection and thermal analysis cards for
powertrain applications. In this release most of the OptiStruct solver features in version 210 are
supported in the OptiStruct interface.
Structural Linear and Nonlinear Enhancements

• LGDISP option in NLPARM subcase
• All models (MOONEY, MOOR, RPOLY, NEOH, YEOH, ABOYCE and OGDEN) supported in
Nonlinear Hyperelastic Material
• SEPARATION option in contact property
• Incremental result output parameters for small displacement nonlinear analysis and large
displacement analysis
• Parameters for time-stepping and convergence criteria in Nonlinear Analysis, NLADAPT
bulk and subcase cards
• Retain Deformed Boundary for multiple continued Nonlinear Subcases, SPC with option F
• Plastic strain results supported for GPSTRAIN output request
• PLASTIC option supported in STRAIN output request
• Negative value on STIFF field to define the penalty scaling factor in CONTPRM, PGAP and
PCONT cards
• Support of material type MATX38
• Support for nonlinear penalty method in PCONT
• DLOAD subcase entry supported for analysis type NLSTAT
• Output results at GAUSS points added to STRESS and STRAIN IO cards
• NEUBER option added to STRESS and STRAIN IO cards
Fatigue Card Enhancements

• Multi-Axial fatigue support in FATPARM
• FOS and DAMAGE I/O cards are enhanced with type (SUB/EVENT) options
• DANG VAN criteria enhancement STHETA and SSHEAR in MATFAT card
• Torsion fatigue limit (Tfl) in MATFAT can now reference to ID of TABLES1 bulk card

Thermal Analysis Enhancements
• PCONTHT: Renamed field title KC to KCHTC and KO to KOHTC
• Support of Thermal expansion coefficient ALPHA field in RBE2 elements
• PCONV supports blank MID when element wise convection FTYPE=3 is defined
Optimization Card Enhancements

• Optimization cards are now supported in the Entity Editor
• Optimization view in Model browser is enhanced to create/edit optimization cards
• Show/Hide/Isolate and cross referencing now supports optimization cards
• FOS as new attribute for DRESP1, DTPL and DSIZE cards
• Topology discreteness TOPDISC option added to DOPTPRM
• CONTOL option added to DOPTPRM
• Vector based input in equations responses
• Surface stress added to response for static stress RTYPE
• CWELD/PWELD added to response for static force RTYPE
• Neuber correction added to response for static stress and strain RTYPE’s

Abaqus > OptiStruct
• Constant and temperature dependent conductivity are now supported in conversion

*CONDUCTIVITY converted to K in MAT4 and Temperature dependent conductivity
converted to MATT4 with TABLEM card
• *HEAT TRANSFER converted to ANALYSIS type HEAT and for nonlinear converted to
ANALYSIS type NLHEAT
• *INITIAL CONDITION, type=temperature converted to TEMP(INITIAL) and referenced in
Global case control
• *BOUNDRY (Temperature dof 11) converted to SPC with ambient temperature
• Reference temperature in Abaqus (defined in *EXPANSION card under ZERO filed),

mapped to TREF in MAT1
• Gap parameters defined in *SURFACE INTERACTION converted to PCONTHT with
TABLED1 referring to TCID for clearance vs conductivity curve or TPID for pressure vs
conductivity curve
• Element wise convection defined through *FILM converted to CHBDYE,CONV, PCONV and
SPC with ambient temperature
• *ELASTIC, type=ANISOTROPIC converted to MAT2/MAT9 based on element type

Solver Card Additions and Enhancements

• PARAM, ODS
• MATX38
• REGCOMPL in OUPUT card
• NLPARM(LGDISP) in subcase entry
• CONTOL and TOPDISC options in DOPTPRM
• MATHE - MOOR, RPOLY, NEOH, YEOH, ABOYCE and OGDEN
• ENDLOAD
• LOADADD
• DRESP1V in DRESP2/3
• DRESP2V in DRESP2/3
• DRESP1LV in DRESP2/3
• DRESP2LV in DRESP2/3
• HASH Failure Theory
• SEPARATION in PCONT
• IDRF in RFORCE
• STHETA and SSHEAR in MATFAT
• NLOUT
• NLADAPT
• STFQDR and STFEXP continuation lines in PCONT
• FRICT in CONTF
• VISC_INC and VISC_EXC in RESVEC
• ESID in EXCLUDE
• PRETPRM, INILOAD
• PRETPRM, PRTSW
• STATSUB(PRELOAD) supported for Frequency Response analysis
• LOAD card is replaced with LOADADD card
• EE option removed from UNITS card

• AUTOSPC2 option removed from PARAM card
• STATSUB(PRELOAD) supported in Frequency Response analysis
• LOAD card is replaced with LOADADD card

• Contact comparison tool
• Parameters for 1D and 3D Bolt Pretensioning
• Ability to set SAVEFILE=NONE in SYSSTETTING
• Grid set support for Pressure output request
• Remove comps and sets option from all Loads panel
Resolved Issues
• CBUSH vector lost while reading legacy HyperMesh files
• OFFT field in CBEAM card not updated correctly
• Not able to import Inspire-created .fem file in HyperMesh
• DRESP3 card with CELLIN and CELLOUT data read as unsupported card
• Tool tip does not appear for SECTION card
• Remove MAXRESP option in DRESP3
• PLASTIC option listed wrongly in TYPE field in STRAIN output request
• Node/Element reference in ATTi not updated when renumbering for DRESP1 type
SPCFORCE and GPFORCE
• Reader does not respond while reading fem file with unsupported material card
• Error while creating DCONTR with Modal frequency response subcase
• Default values issue in MATFAT card

PAM CRASH 2G Interface 14.0.120 Release Notes
Highlights
Newly Supported Keywords

• SECURE_NODE_VISU
• NLAVE
Updated Keywords
• SIGNAL
• MATER 105
• DAMP
Resolved Issues
• Enhancement on Import behavior:

− Avoiding import abort or error upon reading higher version input file into lower version
− Un supported keywords: Upon reading, moving the unsupported keywords into

UnsupportedCard and writing into HMX file. Export under $HMUNSUPPORTED CARDS without
data loss
− Un supported or missing fields: Avoiding import abort or error upon reading and providing
proper warning message
− Supported general MATER card3 as optional to avoid corruption of data
• PYVAR: Supported parameterization of Loads, Load Collectors and Elements
• Improved reading of the keyword FRAME with IDNOD flag by avoiding import abort
• RWALL is phased out from Pamcrash2G2013 and onward versions as per manual
• Fixed extra lines issue in the keyword CDATA

• Removed support of CNTAC 13 to 19 as these doesn’t exist anymore as per manual
• Providing Warning message in prior version and Error message in later version where
option or keyword is phased out for LEAKAGE_MODEL of FPCTRL
• TCTRL implicit Import / Export issues

RADIOSS Interface 14.0.120 Release Notes
Highlights
• Fixed an import issue RADIOSS for /MAT/LAW51 with Iform=3
• Support of fct_ID41 and Hscale1 for /PROP/SPRING and /PROP/SPR_GENE
• Added option PEXT in law51 with IFORM=2,4 and 5 in RADIOSS
• New keyword /ANIM/TITLE
• New option available for RADIOSS 14
• New option Gsh for law58

• Imass flag in law59 and 83
• True_thickness in property type 43
• IBFRAC in LAW5 and LAW51
• Iyield0 in /MAT/LAW32, /MAT/LAW43 and /MAT/LAW73
• New /ANIM options
• New flags in /PROP/SOLID
• Improved the Box trim functionality in RADIOSS that now also takes into account the /SECT
that are empty as a result of a trimming operation.
• Added support of fct_ID4i and Hscalei for /PROP/SPR_AXI card in RADIOSS
• Support of spring type 46 in RADIOSS
• Support /SURF/GRBRIC/EXT, /SURF/GRBRIC/FREE in RADIOSS
Abaqus to RADIOSS Solver Conversion Enhancements

• TIE contacts are converted to TYPE 2
• General Contact Conversion to TYPE24
• Contact Pair conversion to TYPE24
• M3D4R/M3D3 converted to /PROP/SHELL
• Marlow material conversion to /MAT/LAW/70

Resolved Issues
• Fixed a problem in RADIOSS where Systems were incorrectly reported as "empty"

NVH 14.0.120 Release Notes
Highlights
Performance and Robustness Improvements

• Assembly XML import
• LP templates rendering
• Connection realization
• Analysis Manager invoke and apply
Analysis Manager
• Option to run multiple analysis jobs in batch
• Enhancement to support use of module states w/o importing the detailed FE

representation
• Implementation of standard loadcase option for processing and use of road profile input
data
• Progress bar implementation
Edit Module
• Reposition support for modules
• Option to export rendered LP representation to a .dat/.fem
Custom Templates
• Enhancement in Preferences to specify custom template folder for
− Frequency Response
− Normal Modes
− LP Modules
− Full solver deck
• Option to access custom templates from respective feature list mentioned above

Prepare Module
• Auto creation of HM assembly definition to capture component information to

representation files, to allow modules be turned on/off easily during normal modes results
visualization in HyperView.
Analysis
• Default AMSES amplification factor increased in Analysis Manager, Process Manager, and
Batch Model Reduction tools for CMS SE residual runs
Transfer Path Analysis
• Provision to generate force input solver deck from force result file for body optimization
• Tagpoint mapping file support from force file directory
Resolved Issues
• Deleting jobs from Job Manager
• Connection realization issue in switching module rep between FE and LP in Analysis

Manager
• Issue in copying Job Attributes from ‘Job Details’ tab in Job Manager – Linux specific
• Cyclic dependency for LP LCS rendering while Assembly template csv import
• Deletion of Beam sections and its collectors on prepare module
• User messages related to tagpoint rendering on changing rep files for a module

SimLab 14.2 Release Notes
Highlights
SimLab 14.2 comes with various changes that improve performance and graphics rendering. In
addition to java scripting, python scripting is introduced. The enhancements, new features and critical
bug fixes are listed below.
System
• Added a filter in vertical tool list to select the RBE bodies.
• SimLab application setting contents are moved from System App data to .altair folder.
• Added cutting plane support for point cloud entity.
Import Enhancements
Parasolid
• Parasolid version updated to 28.1.194
CAD Translator
• Step to Parasolid translator version updated.
CATIA
• Added a support to read the points.
• CATIA direct import enhanced to read R25 models
ProE
• Support added to import Creo 3.0 models
Abaqus
• Supported reading of S8R and S8R5 elements.
Nastran/OptiStruct
• Reading of PLOTEL3 and PLOTEL4 element types supported.
• Reading of RFORCE supported.
• Supported reading of property and material names from HM comment cards $HMNAME
PROP and $HMNAME MAT.
• Supported create features option in solver import, to create planar and cylindrical
features while importing FEM model.

Graphics/User Interface
• Supported selection of all the groups by clicking on the group type header.
• Render Mode > Edge Display > Face Edge option is enhanced to Show/Hide the CAD
edges.
• Added an option to display the mesh control in a Group view or Sequential view. Group
view display the mesh controls based on type whereas sequential view display the mesh
controls in the creation order.
• Support added to set the user defined shortcut keys for bottom toolbar options.
• Render Mode > Edge Display > Free edge boundary option added to display the free and
non-manifold edge boundaries without displaying layers.
• Render Mode > Edge Display > Element Free Edge / Element Non-manifold Edge is
enhanced to visualize free edge and non-manifold edge in different color for visible
bodies.
• Option added in body right click to find and replace body names for selected bodies.
• File > Preferences > System > Reset System Settings option enhanced to have an user
control on reset options.
• Cutting plane > Cut layer display enhanced to draw boundary edges.
• Option added under mesh control right click to duplicate the mesh control.
• Support added to show/hide the orphan nodes only for visible model.
• File > Preferences > Application > Auto save option enhanced to specify user defined
location to save the database. Also, number of backup database can be specified.
Geometry
Face > Select Connected

• “Bodies inner surfaces” option added to identify the inner surfaces. This helps to extract
the wetted surfaces of fluid.
Meshing
Mesh > 2D Create > Mesh Controls

• Cylinder and Torus attributes information are considered while meshing the facet
geometry.
• Grading is supported on the surface where aligned mesh control is assigned.
• Option added to specify model name for surface mesh output.
• Grading, curvature angle and minimum element size are added for 1D bar meshing.

Mesh > 2D Create > Pipe Mesh
• Enhanced the tool to assign material to the pipe mesh. The density of the fluid inside the
pipe is dumped into the density of the pipe material.
Mesh > Verify > Crack

• Group connected elements option added to create separate failed element groups based
on connectivity.
Mesh > Verify > Quality

• OptiStruct error and warning checks are supported for Tri and Tet elements.
• Option added to generate element quality report in HTML format.
• Performance improved for hex and wedge warpage quality in case of one layer of
extruded elements.
Mesh > Modify > Fill Hole

• Performance improved for edge loop based filling.
Mesh > Modify > Grid Mesh
• Performance improved while modifying the mesh with fine mesh size.
Mesh > Modify > Hex Wedge > Local Refinement

• Option added to refine hex elements locally.
Mesh > Modify > Smoother
• Enhanced to support higher order elements
Mesh > 3D Create > Volume Mesh

• Option added to specify model name for volume mesh output.
• Volume Mesh performance improved for large models.
• Hard point mesh control is considered while generating volume elements.
Mesh > 3D Create > nFX Particles

• nFX particle creation for Fluid and Solid volumes is supported
Assembly
Imprint > Edges on Edges
• Robustness of this tool is increased

Features
Remove > Chamfer

• Enhanced to remove chamfer faces with non isomesh pattern.
Analysis
Loads and Constraints > Contact

• Supported frictional elastic slip and sliding type parameter in OptiStruct contact.
• Added surface to surface node under support type parameter in Permas contact.
• When Permas contacts are created with springs, the corresponding springs will be deleted
on contact deletion.
• Contact manager enhanced to modify elements in master or slave surfaces.
• Added option in Set dialog to create solid element set based on the number of layers
specified.
• The loads and constraints listed under load case will be arranged in alphabetical order.
• Supported creation of mapped data as temperature constraint load in mapping dialog.

• Toggle added in preference dialog “Create separate property for each selected bodies” to
create separate property for each body when multiple bodies are selected.
• Automatic toggle supported in Plot element dialog for fast creating of plot elements.
• The shear modulus value in the default material created by SimLab is changed to blank.
• The solution parameters and the output request options are supported in separate dialog
and this will be listed as items in loads and boundary conditions tree and also stored in
database.
• Added option to perform data check in OptiStruct, Abaqus and Permas solvers directly
from SimLab.
Export
Abaqus
• Modal frequency response analysis supported.
OptiStruct
• NLOUT, NLADAPT and CNTSTB parameters supported in OptiStruct nonlinear analysis.

• Option to include direct matrix inputs, stiffness matrix (K2GG), mass matrix (M2GG) and
load matrix (P2G) supported in Normal mode analysis.
• Supported STATSUB (STRUCTURE) writing in steady state heat transfer analysis to
determine the contact / gap status for heat transfer analysis.
• Supported distributed convection (CONV) table writing.
• Heat source (QVOL) writing supported.
• Supported Simpack analysis type to create condensed CMS super element formulation for
Simpack.
• Supported the following options in Excite analysis,
− Option to export the ASET as a separate file.
− Multiple file input support for ASSIGN card.
− GMOT, SMOT and GMOTR options supported in EXCEXB parameter.
− Recovery Matrix option supported in EXCEXB parameter.
− EXCOP2 and EXTOUT parameters supported.
• Supported the following symmetry types in topology design space dialog.

− 1 plane symmetry
• The following parameters are supported

− UNSYMSLV
− HASHASSM
− I64SLV
− PRETBOLT
OptiStruct/Nastran
• If any of the dependent RBE2 nodal DOF is constrained, then that DOF will be skipped in
constraint writing.
Ansys
• Supported pressure writing with amplitude table.
nanoFluidX
• Supported exporting hex meshed bodies as nanoFluidX particles. Also the configuration
file with the phase details will be exported.

Results
Animate
• Enhanced to support RBE elements.
Distortion > Bore

• Bug fix done on plotting of different bore distortion order.
• Crash is fixed on export of the selected distortion parameters
Right Click > Principal Stress

• Added support to view principal stress, by doing a right click on the UI. Principal stress
will be listed only if stress results are present.
Advanced
Bolt Modeling > 1D Bolt > 1D Bolt Pretension

• Previously, only positive pretension force can be specified. Now, negative pretension force
can also be given.
Crank Train
• In advanced and no break tools, shared faces present in the input body are preserved.
Power Train > Bearings

• Supported creation of following bearing profiles.
− Radial ball bearing
− Radial double ball bearing
− Angular contact ball bearing
− Angular contact double ball bearing
− 4-point contact ball bearing
− Roller bearing
Process Automation
• Group color is activated while opening the group mapping dialog. This helps in
visualization of groups to avoid adding duplicate entities.
Trials > Wedge thickness
• This option is useful after using layered elements option. It is used to identify the node
thickness along the extruded direction. It creates a contour plot using the nodes and its
corresponding thickness.
Trials > Layered Elements Validation

• Before creating the layered elements , this option is helpful in identifying elements which
would not be extruded for the defined thickness.Groups will be created for elements
which are less than the given thickness.
Scripting
• Project menu redesigned such that options are added to record, pause, stop, cancel and
playback the script. This new design helps in recording multiple scripts under same
project directory. Also, single script can be recorded by interrupting the process by
making use of pause option.
• Script recording supported in following formats in adding to Java script.
− Python (*.py)
− XML (Icons)

HyperWorks Desktop 14.0.120 ReleaseNotes

Uploaded by

Copyright:

Available Formats

HyperWorks Desktop 14.0.120 ReleaseNotes

Uploaded by

Document Information

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

HyperWorks Desktop 14.0.120 ReleaseNotes

Uploaded by

Copyright:

Available Formats

HyperWorks 14.0.

HyperWorks is a division of Altair altairhyperworks.com

Copyright© Altair Engineering Inc. All Rights Reserved for:

Other Altair software applications include:

Altair Packaged Solution Offerings (PSOs) Copyright© 2008-2015

Third party software licenses

Software Security Measures:

Copyright© Altair Engineering Inc. All Rights Reserved for:

Other Altair software applications include:

Altair Packaged Solution Offerings (PSOs) Copyright© 2008-2015

Third party software licenses

Software Security Measures:

See the release notes for the following products:

HyperWorks Desktop Solver Interfaces

HyperMesh Abaqus Interface

HyperView ANSYS Interface

HyperGraph CAD Interfaces

MotionView EXODUS Interface

HyperCrash LS-DYNA Interface

Manufacturing Solutions OptiStruct Interface

HyperForm PAM-CRASH Interface

Aerospace Engineering SimLab 14.2

HyperWorks 14.0.120 Release Notes 1

Proprietary Information of Altair Engineering

HyperWorks 14.0.120 Release Notes 2

Proprietary Information of Altair Engineering

• XML comments and CSV Support

HyperWorks 14.0.120 Release Notes 3

Proprietary Information of Altair Engineering

• Filtering Includes and Hiding Excluded Entities

HyperWorks 14.0.120 Release Notes 4

Proprietary Information of Altair Engineering

After applying Filter Include and Hide Excluded Entities settings

• Ability to organize associated elements while organizing solids geometry

HyperWorks 14.0.120 Release Notes 5

Proprietary Information of Altair Engineering

Include Export Options

HyperWorks 14.0.120 Release Notes 6

Proprietary Information of Altair Engineering

Part Replacement Updates

• Organizing a component to an include is not working consistently.

• Application crashes while using hm_createmark API for curves.

HyperWorks 14.0.120 Release Notes 7

Proprietary Information of Altair Engineering

Model Build & Assembly

Figure X: BIW Configurations

Proprietary Information of Altair Engineering

HyperWorks 14.0.120 Release Notes 9

Proprietary Information of Altair Engineering

HyperWorks 14.0.120 Release Notes 10

Proprietary Information of Altair Engineering

Convert Connector Style Enhancement

HyperWorks 14.0.120 Release Notes 11

Proprietary Information of Altair Engineering

HyperWorks 14.0.120 Release Notes 12

Proprietary Information of Altair Engineering

HyperWorks 14.0.120 Release Notes 13

Proprietary Information of Altair Engineering

HyperWorks 14.0.120 Release Notes 14

Proprietary Information of Altair Engineering

New options have been added to createmarkpanel and editmarkpanel: