www.swagelok.

com

G auge able SAF 2507™

Supe r D uplex Tube Fit tings

■ Excellent corrosion resistance in chloride-containing environments

■ Advanced-geometry back ferrule design enhances sealing action

■ Same gaugeability as traditional Swagelok® tube fittings

■ Easy installation using hand tools

■ Available in sizes from 1/4 to 3/4 in.

MS-01-174 Gaugeable SAF 2507 Super Duplex tube fittings.pdf

2 Gaugeable SAF 2507 Super Duplex Tube Fittings

Features Materials of Construction

Swagelok Company has worked with Sandvik®
Steel, the makers of SAF 2507 super duplex Component Material Marking
stainless steel, to create a tube fitting design for 1 SAF 2507 super Notched hex,
1 Nut
duplex SS “SAF 2507” on face
connecting SAF 2507 tube systems. This fitting
combines a patented, advanced-geometry shape 2 Back “254” or “6XN”
6-moly➀
ferrule on outer rim
for the back ferrule and a patented ferrule hardening
process. The result is a Swagelok tube fitting that 2 3 Front SAF 2507 super “2507”
ferrule duplex SS on outer rim
can reliably grip and seal on exceptionally hard
SAF 2507 super “2507”
SAF 2507 tube. 3 4 Body
duplex SS on neck
Swagelok SAF 2507 tube fittings are available in Wetted components listed in italics.
sizes from 1/4 to 3/4 in. and can be installed using ➀ Alloy 254—UNS S31254; alloy AL-6XN®—UNS N08367.
simple hand tools. All SAF 2507 and 6-moly tube
fitting components are manufactured from controlled 4  Do not mix components of other
chemistry material with a minimum pitting resistance materials with SAF 2507 tube fittings.
equivalent (PRE) value of 42.5. Each Swagelok
SAF 2507 tube fitting component is stamped with its
material type.

Pressure Ratings
Pressure ratings for a fluid system are determined by the end connection or system component with the
lowest pressure rating. Ratings for the end connections listed in this catalog are discussed below.

Swagelok Tube Fittings

Swagelok tube fittings listed in this catalog are rated to the pressure rating of the tubing (see table below).

Pressure Ratings for Swagelok SAF 2507 Tube Fittings Used with SAF 2507 Tubing
Pressure ratings are calculated from
Tube Wall Thickness, in.
S values (38 700 psi [266 MPa]), in Tube
accordance with ASME B31.3, Process 0.035 0.049 0.065 0.083 0.095
OD
Piping. Tubing pressure ratings are in. Working Pressure, psig (bar)
for metal temperatures from –20 to 1/4 10 000 (690) 15 000 (1040)➀ — — —
100°F (–28 to 37°C). SAF 2507 tubing, 3/8 6 500 (450) 10 100 (700)➀ 12 700 (880) — —
fully annealed, meets ASTM A789 or 1/2 5 000 (350) 7 200 (500) 10 100 (700)➀ 12 900 (890) —
equivalent. Hardness value is HRC 32
5/8 — 5 800 (400) 7 600 (530) 10 100 (700) —
or less.
3/4 — 4 700 (330) 6 300 (440) 8 500 (590) 10 000 (690)
For lower temperature use, see Low-
Temperature Ratings, page 3. For ➀ Pressure ratings based on special wall thickness tolerance for Swagelok SAF 2507 tubing.
gas service, use tube wall thicknesses
outside the shaded area.
Elevated Temperature Ratings
Male NPT End Connections Tube Fitting and NPT End Connections
Male NPT pipe end connections up to 1/2 in. are rated Multiply working pressure
from the table above by the Temperature
to 15 000 psig (1040 bar); sizes over 1/2 in. are rated to °F (°C) Factor
10 000 psig (690 bar). appropriate factor to obtain
working pressure at elevated 200 (93) 0.90
temperatures. 300 (148) 0.85
SAE/MS End Connections
Example: 1/4 in. tubing with 400 (204) 0.82
SAE/MS end connections up to 1/2 in. are rated to 4500 psig
(310 bar); sizes over 1/2 in. are rated to 3600 psig (250 bar), in 0.035 in. wall at 300°F (148°C): 482 (250) 0.81
accordance with SAE J1926. The working pressure at 100°F
(37°C) is 10 000 psig (690 bar).
Cone-and-Thread End Connections The temperature factor for 300°F (148°C) is 0.85.
Cone-and-thread end connections listed in this catalog are 10 000 psig (690 bar)  0.85 is 8500 psig (585 bar).
manufactured to API-6A “Specification for Wellhead and
Christmas Tree Equipment” tolerances, Autoclave Engineers, The working pressure for 1/4 in. tubing with 0.035 in. wall at
and Butech Pressure Systems catalog dimensions. Sizes 300°F (148°C) is 8500 psig (585 bar).
up to 9/16 in. are rated to 20 000 psig (1380 bar); sizes over Use of SAF 2507 super duplex stainless steel at temperatures
9/16 in. are rated to 10 000 psig (690 bar). above 482°F (250°C) causes microstructural changes that
lead to embrittlement and loss of corrosion resistance.

MS-01-174 Gaugeable SAF 2507 Super Duplex tube fittings.pdf

 Gaugeable SAF 2507 Super Duplex Tube Fittings 3

Pressure Ratings
Low-Temperature Ratings
Fitting pressure ratings are for metal temperatures from –50
to 100ºF (–46 to 37ºC), based on –50ºF (–46ºC) impact tests
performed on SAF 2507 bar and forgings. The tubing listed
in the table on page 2 has a minimum use temperature of
–20ºF (–28ºC) in accordance with ASME B31.3.
However, the NORSOK M-001 Materials Selection standard
allows this tubing to be used at a minimum temperature of
–50ºF (–46ºC). According to the NORSOK M-630 Material
Data Sheets for Piping, SAF 2507 tubing does not have to
undergo low-temperature impact testing so long as wall
thicknesses are below 0.236 in. (6 mm).

Ordering Information and Dimensions

■ Dimensions are for reference only and are subject to change.
■ Dimensions are shown with Swagelok tube fitting nuts finger-tight. For Swagelok nut dimensions, see page 7.
■ The E dimension is the minimum nominal opening.
■ CAD templates are available on www.swagelok.com.

Straight Fittings
Unions Tube
Dimensions, in. (mm)
OD Ordering
in. Number A D E
1/4 2507-400-6 1.61 (40.9) 0.60 (15.2) 0.19 (4.8)
3/8 2507-600-6 1.77 (45.0) 0.66 (16.8) 0.28 (7.1)
D E D 1/2 2507-810-6 2.02 (51.3) 0.90 (22.9) 0.41 (10.4)
A
5/8 2507-1010-6 2.11 (53.5) 0.96 (24.4) 0.50 (12.7)
3/4 2507-1210-6 2.11 (53.5) 0.96 (24.4) 0.62 (15.9)

Bulkhead Unions Dimensions, in. (mm)

F flat F flat Tube Panel Max
OD Ordering Hole Panel
in. Number A D E F Size Thickness
1/4 2507-400-61 2.27 (57.7) 0.60 (15.2) 0.19 (4.8) 5/8 29/64 0.40 (10.2)
3/8 2507-600-61 2.45 (62.2) 0.66 (16.8) 0.28 (7.1) 13/16 37/64 0.44 (11.2)
D E D
A 1/2 2507-810-61 2.80 (71.1) 0.90 (22.9) 0.41 (10.4) 1 1/16 49/64 0.50 (12.7)
5/8 2507-1010-61 3.11 (78.9) 0.96 (24.4) 0.50 (12.7) 1 3/16 1 1/64 0.66 (16.8)
3/4 2507-1210-61 3.33 (84.5) 0.96 (24.4) 0.62 (15.9) 1 3/8 1 9/64 0.75 (19.0)

Male Connectors NPT

F flat Tube
Dimensions, in. (mm)
OD NPT Ordering
in. Size Number A D E F
E
1/4 2507-400-1-4 1.49 (37.8) 9/16
1/4 0.60 (15.2) 0.19 (4.8)
1/2 2507-400-1-8 1.76 (44.7) 7/8
D 1/4 2507-600-1-4 1.57 (39.9) 5/8
A 3/8 3/8 2507-600-1-6 1.57 (39.9) 0.66 (16.8) 0.28 (7.1) 11/16
1/2 2507-600-1-8 1.82 (46.2) 7/8
1/4 2507-810-1-4 1.71 (43.4) 0.28 (7.1) 13/16
1/2 3/8 2507-810-1-6 1.71 (43.4) 0.90 (22.9) 0.38 (9.7) 13/16
1/2 2507-810-1-8 1.93 (49.0) 0.41 (10.4) 7/8
5/8 1/2 2507-1010-1-8 1.99 (50.5) 0.96 (24.4) 0.47 (11.9) 1 1/16
3/4 2507-1210-1-12 1.99 (50.5) 1 3/16
3/4 0.96 (24.4) 0.62 (15.9)
1 2507-1210-1-16 2.25 (57.1) 1 3/8

MS-01-174 Gaugeable SAF 2507 Super Duplex tube fittings.pdf

4 Gaugeable SAF 2507 Super Duplex Tube Fittings

Straight Fittings
Male Connectors SAE/MS Straight Thread (ST)
Tube SAE/MS Uniform
F flat Dimensions, in. (mm)
O-ring OD Thread Ordering O-ring
in. Size Number A D E➀ F Size➁
7/16-20 2507-400-1-4ST 1.34 (34.0) 9/16 904
1/4 0.60 (15.2) 0.19 (4.8)
9/16-18 2507-400-1-6ST 1.40 (35.6) 11/16 906
3/8 9/16-18 2507-600-1-6ST 1.46 (37.1) 0.66 (16.8) 0.28 (7.1) 11/16 906
D E
A 9/16-18 2507-810-1-6ST 1.54 (39.1) 0.28 (7.1) 13/16 906
1/2 0.90 (22.9)
3/4-16 2507-810-1-8ST 1.65 (41.9) 0.41 (10.3) 7/8 908
5/8 7/8-14 2507-1010-1-10ST 1.77 (44.9) 0.96 (24.4) 0.50 (12.7) 1 1/16 910
3/4 1 1/16-12 2507-1210-1-12ST 1.93 (49.0) 0.96 (24.4) 0.62 (15.6) 1 3/8 912
➀ May be back drilled to larger ID at straight thread end.
➁ Standard O-ring material is 90 durometer fluorocarbon FKM.

Cone-and-Thread

Medium-
F flat E 29° Tube Pressure
Dimensions, in. (mm)
OD Tube Size Ordering
in. in. Number A D E F G Thread Size
G 1.62 0.60 0.11 0.14
1/4 1/4 2507-400-1-4MP 1/2 7/16-20 UNF-2
(41.1) (15.2) (2.8) (3.6)
D
A 1.92 0.66 0.21 0.25
3/8 3/8 2507-600-1-6MP 5/8 9/16-18 UNF-2
(48.8) (16.8) (5.3) (6.4)
2.15 0.90 0.31 0.41
1/2 9/16 2507-810-1-9MP 7/8 13/16-16 UN-2
(54.6) (22.9) (7.9) (10.4)
2.24 0.96 0.31 0.41
5/8 9/16 2507-1010-1-9MP 1 1/16 13/16-16 UN-2
(56.8) (24.4) (7.9) (10.4)
2.53 0.96 0.45 0.56
3/4 3/4 2507-1210-1-12MP 1 3/16 3/4-14 NPSM-2
(64.2) (24.4) (11.5) (14.2)

Cone-and-Thread Medium-
Female Connectors Tube Pressure
Dimensions, in. (mm)
OD Tube Size Ordering
F flat
in. in. Number A D E F Thread Size
Weep hole 1.37 0.60 0.11
1/4 1/4 2507-400-7-4MP 11/16 7/16-20 UNF-2
(34.8) (15.2) (2.8)
1.57 0.66 0.20
3/8 3/8 2507-600-7-6MP 7/8 9/16-18 UNF-2
(39.9) (16.8) (5.1)
D E 1.96 0.90 0.36
A 1/2 9/16 2507-810-7-9MP 1 1/16 13/16-16 UN-2
(49.8) (22.9) (9.1)

Reducers
Tube OD, in. Dimensions, in. (mm)
F flat Ordering
T Tx Number A D E
3/8 2507-400-R-6 1.60 (40.6)
T Tx 1/4 0.60 (15.2) 0.19 (4.8)
1/2 2507-400-R-8 1.82 (46.2)
1/4 2507-600-R-4 1.63 (41.4) 0.17 (4.3)
E 3/8 0.66 (16.8)
D 1/2 2507-600-R-8 1.91 (48.5) 0.28 (7.1)
A
1/4 2507-810-R-4 1.77 (45.0) 0.17 (4.3)
1/2 3/8 2507-810-R-6 1.84 (46.7) 0.90 (22.9) 0.27 (6.9)
3/4 2507-810-R-12 2.12 (53.8) 0.41 (10.3)
3/4 1/2 2507-1210-R-8 2.20 (55.8) 0.96 (24.4) 0.37 (9.3)

MS-01-174 Gaugeable SAF 2507 Super Duplex tube fittings.pdf

 Gaugeable SAF 2507 Super Duplex Tube Fittings 5

Straight Fittings
Port Connectors Tube
Dimensions, in. (mm)
OD Ordering
in. Number E H
E
1/4 2507-401-PC 0.17 (4.3) 0.98 (24.9)
H 3/8 2507-601-PC 0.27 (6.9) 1.05 (26.7)
1/2 2507-811-PC 0.37 (9.3) 1.43 (36.3)
5/8 2507-1011-PC 0.47 (12.0) 1.49 (37.8)
3/4 2507-1211-PC 0.58 (14.7) 1.49 (37.8)

Caps Tube Plugs Tube

Dimensions, in. (mm)
OD Ordering OD Ordering
in. Number A D in. Number
1/4 2507-400-C 0.92 (23.4) 0.60 (15.2) 1/4 2507-400-P
3/8 2507-600-C 1.01 (25.7) 0.66 (16.8) 3/8 2507-600-P
D 1/2 2507-810-C 1.15 (29.2) 0.90 (22.9) 1/2 2507-810-P
A
5/8 2507-1010-C 1.24 (31.5) 0.96 (24.4) 5/8 2507-1010-P
3/4 2507-1210-C 1.34 (34.0) 0.96 (24.4) 3/4 2507-1210-P

Union Elbows Tube

Dimensions, in. (mm)
E OD Ordering
F flat in. Number A D E F
1/4 2507-400-9 1.06 (26.9) 0.60 (15.2) 0.19 (4.8) 1/2
3/8 2507-600-9 1.20 (30.5) 0.66 (16.8) 0.28 (7.1) 5/8
1/2 2507-810-9 1.42 (36.1) 0.90 (22.9) 0.41 (10.4) 13/16
D
A
5/8 2507-1010-9 1.57 (39.8) 0.96 (24.4) 0.50 (12.7) 1 1/16
3/4 2507-1210-9 1.70 (43.1) 0.96 (24.4) 0.62 (15.9) 1 3/16

Union Tees Tube

Dimensions, in. (mm)
E OD Ordering
in. Number A Ax D E F
1/4 2507-400-3 2.12 (53.8) 1.06 (26.9) 0.60 (15.2) 0.19 (4.8) 1/2
3/8 2507-600-3 2.40 (61.0) 1.20 (30.5) 0.66 (16.8) 0.28 (7.1) 5/8

D F flat 1/2 2507-810-3 2.84 (72.1) 1.42 (36.1) 0.90 (22.9) 0.41 (10.4) 13/16
Ax
5/8 2507-1010-3 3.14 (79.6) 1.57 (39.8) 0.96 (24.4) 0.50 (12.7) 1 1/16
3/4 2507-1210-3 3.40 (86.2) 1.70 (43.1) 0.96 (24.4) 0.62 (15.9) 1 3/16

Ax
A

Union Crosses Tube

Dimensions, in. (mm)
OD Ordering
in. Number A D E F
1/4 2507-400-4 2.12 (53.8) 0.60 (15.2) 0.19 (4.8) 1/2
E 3/8 2507-600-4 2.40 (61.0) 0.66 (16.8) 0.28 (7.1) 5/8
1/2 2507-810-4 2.84 (72.1) 0.90 (22.9) 0.41 (10.4) 13/16
A

F flat D

MS-01-174 Gaugeable SAF 2507 Super Duplex tube fittings.pdf

6 Gaugeable SAF 2507 Super Duplex Tube Fittings

Tube Adapters
Male Adapters NPT

F flat Tube NPT

Dimensions
OD Size Ordering
in. in. Number A E F
E 1/4 1/4 2507-4-TA-1-4 1.46 (37.1) 0.17 (4.3) 9/16
1/4 2507-6-TA-1-4 1.53 (38.9) 9/16
A 3/8 3/8 2507-6-TA-1-6 1.56 (39.6) 0.27 (6.9) 11/16
1/2 2507-6-TA-1-8 1.78 (45.2) 7/8
1/4 2507-8-TA-1-4 1.75 (44.4) 0.28 (7.1) 9/16
1/2
1/2 2507-8-TA-1-8 2.00 (50.8) 0.37 (9.4) 7/8
5/8 1/2 2507-10-TA-1-8 2.06 (52.3) 0.47 (11.9) 7/8
3/4 3/4 2507-12-TA-1-12 2.06 (52.3) 0.58 (14.7) 1 1/16

SAE/MS Straight Thread (ST)

F flat Tube SAE/MS Basic Uniform

Dimensions
O-ring OD Thread Ordering O-ring
in. Size Number A E F Size➀
E 1/4 7/16-20 2507-4-TA-1-4ST 1.39 (35.3) 0.17 (4.3) 9/16 904
7/16-20 2507-6-TA-1-4ST 1.46 (37.1) 0.20 (5.1) 9/16 904
3/8
A 9/16-18 2507-6-TA-1-6ST 1.52 (38.6)) 0.27 (6.9) 11/16 906
9/16-18 2507-8-TA-1-6ST 1.74 (44.2) 0.28 (7.1) 11/16 906
1/2
3/4-16 2507-8-TA-1-8ST 1.82 (46.2) 0.37 (9.4) 7/8 908
3/4 1 1/16-12 2507-12-TA-1-12ST 2.10 (53.3) 0.58 (14.7) 1 1/4 912
➀ Standard O-ring material is 90 durometer fluorocarbon FKM.

Cone-and-Thread Fitting

Medium-
F flat E 29° Tube Pressure
Dimensions, in. (mm)
OD Tube Size Ordering
in. in. Number A E F G Thread Size
1.56 0.11 0.14
G 1/4 1/4 2507-4-TA-1-4MP 1/2 7/16-20 UNF-2
(39.6) (2.8) (3.6)
A
1.86 0.21 0.25
3/8 3/8 2507-6-TA-1-6MP 5/8 9/16-18 UNF-2
(47.2) (5.3) (6.4)
2.24 0.31 0.41
1/2 9/16 2507-8-TA-1-9MP 7/8 13/16-16 UN-2
(56.9) (7.9) (10.4)
2.40 0.31 0.41
5/8 9/16 2507-10-TA-1-9MP 7/8 13/16-16 UN-2
(61.0) (7.9) (10.4)
2.68 0.45 0.56
3/4 3/4 2507-12-TA-1-12MP 1 1/8 3/4-14 NPSM-2
(68.1) (11.5) (14.2)

Cone-and-Thread Medium-
Female Adapters Tube Pressure
Dimensions, in. (mm)
OD Tube Size Ordering
F flat
in. in. Number A E F Thread Size
Weep hole
1.31 0.11
1/4 1/4 2507-4-TA-7-4MP 11/16 7/16-20 UNF-2
(33.3) (2.8)
1.51 0.20
3/8 3/8 2507-6-TA-7-6MP 7/8 9/16-18 UNF-2
(38.4) (5.1)

E 2.05 0.36
1/2 9/16 2507-8-TA-7-9MP 1 1/16 13/16-16 UN-2
A (52.1) (9.1)

MS-01-174 Gaugeable SAF 2507 Super Duplex tube fittings.pdf

 Gaugeable SAF 2507 Super Duplex Tube Fittings 7

Replacement Parts Cleaning and Packaging

Fitting components are cleaned to remove machine oil,
Nuts
G flat
grease, and loose particles. For more information, see
Swagelok Standard Cleaning and Packaging (SC-10),
MS‑06‑62.

L Tools for Use with SAF 2507 Tube Fittings

Dimensions Preswaging Tools
Tube
in. (mm)
OD Ordering
in. Number G L Tube
1/4 2507-402-1 9/16 0.50 (12.7) OD Ordering
in. Number
3/8 2507-602-1 11/16 0.56 (14.2)
1/4 MS-ST-400
1/2 2507-812-1 7/8 0.69 (17.4)
5/8 2507-1012-1 1 1/8 0.69 (17.4) 3/8 MS-ST-600
3/4 2507-1212-1 1 1/4 0.69 (17.4) 1/2 MS-ST-810
SWAGELOK FRONT FERRULE CUTAWAY-MS-01-140 C-PH-0056-BDM 5/8 MS-ST-2507-1010
For Swagelok tube fitting
3/4 MS-ST-2507-1210
Ferrules Front installations in close quarters,
the Swagelok preswaging tool is
Tube a convenient accessory.
OD Ordering
in. Number
1/4 2507-403-1
Multihead Hydraulic Swaging Unit (MHSU)
3/8 2507-603-1
1/2 2507-813-1
5/8 2507-1013-1
3/4 2507-1213-1

SWAGELOK BACK FERRULE CUTAWAY-MS-01-140 C-PH-0056-ADM

Back

Tube
OD Ordering
in. Number
1/4 6ML-404-1A ■ Preswages Swagelok ferrules onto 5/8 and 3/4 in. SAF 2507
3/8 6ML-604-1A tubing. For 5/8 and 3/4 in. SAF 2507 tubing, order the
1/2 6ML-814-1A 1 in./25 mm and over unit and SAF 2507 tooling. The MHSU
5/8 6ML-1014-1A cannot be used for SAF 2507 tubing 1/2 in. and under.
3/4 6ML-1214-1A ■ Provides Swagelok tube fittings that are 100 % gaugeable
when installed
■ Places no initial strain on nut or fitting body threads or on
body seal surfaces
■ Is standard with a tube marking feature to indicate when
tube is properly bottomed

Description Ordering Number

MHSU only
(1 in. and over unit) MS-MHSU-O-E
5/8 in. tooling MS-MHSUT-O-2507-1010-M
3/4 in. tooling MS-MHSUT-O-2507-1212-M

For additional information, see the Swagelok Gaugeable

Tube Fittings and Adapter Fittings catalog, MS‑01‑140. For
instructions, see Multihead Hydraulic Swaging Unit (MHSU)
Setup and Operation Instructions, MS‑12‑37.

MS-01-174 Gaugeable SAF 2507 Super Duplex tube fittings.pdf

8 Gaugeable SAF 2507 Super Duplex Tube Fittings

Tools for Use with SAF 2507 Tube Fittings Gaugeability

On initial installation, the Swagelok gap inspection gauge
Gap Inspection Gauges
assures the installer or inspector that a fitting has been
Swagelok gap inspection gauges assure the installer or sufficiently tightened.
inspector that the fitting has been sufficiently pulled up
on initial installation, whether using a multihead hydraulic
swaging unit (MHSU) or wrench tightening. Position the Swagelok gap inspection gauge next to the gap
between the nut and body.
For Installation Tube
Using a Wrench OD Ordering
in. Number
1/4 MS-IG-400
3/8 MS-IG-600
1/2 MS-IG-810
5/8 MS-IG-2507-1010
3/4 MS-IG-2507-1210

If the gauge will not enter If the gauge will enter the
For Installation Tube the gap, the fitting is gap, additional tightening
Using the MHSU OD Ordering sufficiently tightened. is required.
in. Number
5/8 MS-MHSU-IG-2507-1010  Always depressurize the system before adjusting
3/4 MS-MHSU-IG-2507-1210 the tightness of a tube fitting connection.

Interchangeability
Intermixing and interchanging tube fitting components
Depth Marking Tools of different manufacturers can be dangerous. Leak-tight
Swagelok depth marking tools help seals that will withstand high pressure, vibration, vacuum,
ensure that tubing is bottomed on the and temperature changes depend on close tolerances and
shoulder inside the Swagelok tube consistent, exacting quality control in conjunction with good
fitting body. design principles. The critical interaction of precision parts is
essential for reliability and safety.
Tube Components of other manufacturers may look like Swagelok
OD Ordering tube fitting components—but they cannot be manufactured
in. Number
in accordance with Swagelok engineering standards, nor
1/4 MS-DMT-400
do they benefit from innovations in design and manufacture
3/8 MS-DMT-600 defined by active Swagelok tube fitting patents.
1/2 MS-DMT-810
5/8 MS-DMT-1010 Installation Instructions
3/4 MS-DMT-1210 Swagelok SAF 2507 super duplex tube fittings can be
installed quickly, easily, and reliably.

Safety Precautions
■ Do not bleed system by loosening fitting nut or fitting plug.
■ Do not assemble or tighten fittings when system is
pressurized.
■ Make sure that the tube rests firmly on the shoulder of the
tube fitting body before tightening the nut.
■ Use the correct Swagelok gap inspection gauge to ensure
sufficient pull-up upon initial installation.
■ Always use proper thread sealants on tapered pipe
threads.
■ Do not mix materials or fitting components from various
manufacturers—ferrules, nuts, and fitting bodies.
■ Never turn fitting body. Instead, hold fitting body and turn nut.
■ Avoid unnecessary disassembly of unused fittings.

MS-01-174 Gaugeable SAF 2507 Super Duplex tube fittings.pdf

 Gaugeable SAF 2507 Super Duplex Tube Fittings 9

Installation Instructions
Swagelok Tube Fittings

Fully insert the tube into the fitting and Mark the nut at the 6 o’clock position. While holding the fitting body steady,
against the shoulder; rotate the nut tighten the nut one and one-quarter
finger-tight. turns to the 9 o’clock position.
High-pressure applications and high
safety-factor systems: Further tighten
the nut until the tube will not turn by
hand or move axially in the fitting.

Connections Preswaged with the MHSU

1. Preswage the ferrules onto the tube using a Swagelok 3. Mark the nut at the 6 o’clock position.
multihead hydraulic swaging unit (MHSU). 4. While holding the fitting body steady, tight the nut one-
2. Insert the tube with preswaged ferrules into the fitting half turn to the 12 o’clock position.
until the front ferrule seats against the fitting body; rotate
Use the Swagelok MHSU gap inspection gauge to ensure
the nut finger-tight.
that the fitting has been tightened sufficiently.

Reassembly
You may disassemble and reassemble Swagelok tube fittings many times.
 Always depressurize the system before disassembling a Swagelok tube fitting.

Prior to disassembly, mark the tube at Insert the tube with preswaged ferrules While holding the fitting body steady,
the back of the nut; mark a line along into the fitting until the front ferrule rotate the nut with a wrench to the
the nut and fitting body flats. seats against the fitting body. previously pulled-up position, as
Use these marks to ensure that you indicated by the marks on the tube
return the nut to the previously pulled-up and the flats. At this point, you will feel
position. a significant increase in resistance.
Tighten the nut slightly.
 Do not use the Swagelok gap inspection gauge with reassembled fittings.

Caps and Plugs

Caps Plugs
See Swagelok tube While holding fitting body steady, tighten the plug one-quarter turn from the
fitting installation and finger-tight position.
reassembly, above.
 Do not use the Swagelok gap inspection gauge with plug assemblies.
Reassembly
You may disassemble and reassemble Swagelok plugs many times. Make subsequent
connections by slightly tightening with a wrench after snugging the nut by hand.

MS-01-174 Gaugeable SAF 2507 Super Duplex tube fittings.pdf

 10 Gaugeable SAF 2507 Super Duplex Tube Fittings

Installation Instructions
Port Connectors
Connect the machined ferrule end before connecting the tube adapter end.

Machined Ferrule End Tube Adapter End

1. Remove the nut and ferrules from the Swagelok end 5. Insert the tube adapter until it rests firmly on the shoulder

KOLEGAWS
connection. Discard the ferrules. of the Swagelok tube fitting body. Finger-tighten the nut.
SWAGELOK

SWAGELOK

KOLEGAWS
Discard

6. Mark the nut at the 6 o’clock position. While holding

SWAGELOK
fitting body steady, tighten the nut one and one-quarter
turns to the 9 o’clock position.
2. Slip the nut over
SWAGELOK

the machined
ferrule end of the
port connector.
12
3. Insert the port
connector into the 9
SWAGELOK
SWAGELOK

end connection
and finger-tighten 3
the nut. 6
4. While holding
fitting body steady,
tighten the nut
one-quarter turn.
 Do not use the
Swagelok gap
inspection gauge
with machined Reassembly
ferrule ends. See Swagelok tube fitting reassembly, page 9.
Reassembly
You may disassemble
and reassemble
Swagelok port
connectors many times. Make subsequent connections by
slightly tightening with a wrench after snugging the nut by hand.

Tube Adapters
Fig. 1 1. Install the end opposite the tube 4. While holding fitting body steady,
adapter end (Fig. 1). tighten the nut one and one-
2. Insert the tube adapter into the quarter turns to the 9 o’clock
Swagelok tube fitting. Make sure position.
Female pipe port that the tube adapter rests firmly
on existing equipment on the shoulder of the tube fitting
Reassembly
Fig. 2 body and that the nut is finger-tight See Swagelok tube fitting reassembly,
(Fig. 2). page 9.
3. Mark the nut at the 6 o’clock
position.

MS-01-174 Gaugeable SAF 2507 Super Duplex tube fittings.pdf

 Gaugeable SAF 2507 Super Duplex Tube Fittings 11

Installation Instructions
Depth Marking Tool
Fig. 1 Fig. 2 1. Insert cleanly cut, fully deburred 3. While holding the fitting body
tube into the depth marking tool steady, follow Swagelok tube
(DMT) until the tube is against the fitting installation instructions,
shoulder of the tool. Using a pen or page 9.
pencil, mark the tube at the top of
the DMT (Fig. 1).
2. Remove the tube from the DMT and
insert it into the Swagelok fitting
until it is against the shoulder of
the fitting body (Fig. 2). Rotate the
nut finger-tight. If any portion of
the mark on the tube can be seen
above the fitting nut, the tube is not
fully inserted into the fitting.

Preswaging Tool
Fig. 1 1. Install the Swagelok nut and 7. Remove the tube with preswaged
ferrules onto the preswaging tool. ferrules from the preswaging tool.
2. Insert the tube into the preswaging If the tube sticks in the preswaging
tool. tool, remove the tube by gently
rocking it back and forth. Do not
3. Make sure that the tube rests firmly
turn the tube (Fig. 2).
on the shoulder of the preswaging
tool body and that the nut is finger- 8. Insert the tube with preswaged
tight. ferrules into the fitting until the front
Fig. 2 ferrule seats against the fitting body.
4. Mark the nut at the 6 o’clock
position. 9. While holding the fitting body
steady, rotate the nut with a
5. While holding the preswaging tool
wrench to the previously pulled-up
steady, tighten the nut one and
position; at this point, you will feel
one-quarter turns to the 9 o’clock
a significant increase in resistance.
position (Fig. 1).
Fig. 3 10. Tighten the nut slightly (Fig. 3).
6. Loosen the nut.
 Do not use the Swagelok gap
inspection gauge with fittings
that were assembled using the
preswaging tool.

MS-01-174 Gaugeable SAF 2507 Super Duplex tube fittings.pdf

SAF 2507 Tubing Tubing Tools and
Swagelok offers SAF 2507 tubing Accessories
in sizes of 1/4 to 1 in. outside For tube benders, wrenches,
diameter. See the Swagelok SAF cutters, liquid leak detectors, and
2507 Seamless Super Duplex more, see the Swagelok Tubing
Tubing—Fractional Sizes catalog, Tools and Accessories catalog,
MS-02-151, for more information. MS-01-179.

SAF 2507 Weld Fittings

See the Swagelok SAF 2507
Super Duplex Weld Fittings
catalog, MS‑01‑173, for more
information.

Safe Product Selection Warranty Information

When selecting a product, the total system design must Swagelok products are backed by The Swagelok Limited
be considered to ensure safe, trouble-free performance. Lifetime Warranty. For a copy, visit swagelok.com or contact
Function, material compatibility, adequate ratings, your authorized Swagelok representative.
proper installation, operation, and maintenance are the
responsibilities of the system designer and user.
Swagelok—TM Swagelok Company
AL-6XN—TM Allegheny Ludlum Corporation
Sandvik, SAF 2507—TM Sandvik AB
Caution: Do not mix or interchange parts with those of © 2002–2012 Swagelok Company
other manufacturers. Printed in U.S.A., AGS
MS-01-174, R7

MS-01-174 Gaugeable SAF 2507 Super Duplex tube fittings.pdf