Scribd Logo
Upload

Welcome to Scribd!

  • 89 views

    IFYUI

    Uploaded by

    jude
    This 3-sentence summary provides the key details from the document: The document presents the design calculations for a 3-pile group foundation with 300mm diameter piles spaced 900mm apart and embedded 800mm into the ground to support a working load of 900kN. Moment and shear capacity calculations are shown to check that the pile cap and pile reinforcement sizes are adequate to resist the bending and shear stresses from the applied load.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd

    IFYUI

    Uploaded by

    jude
    89 views2 pages
    This 3-sentence summary provides the key details from the document: The document presents the design calculations for a 3-pile group foundation with 300mm diameter piles spaced 900mm apart and embedded 800mm into the ground to support a working load of 900kN. Moment and shear capacity calculations are shown to check that the pile cap and pile reinforcement sizes are adequate to resist the bending and shear stresses from the applied load.

    Original Description:

    TWERTQ

    Copyright

    © © All Rights Reserved

    Available Formats

    XLS, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This 3-sentence summary provides the key details from the document: The document presents the design calculations for a 3-pile group foundation with 300mm diameter piles spaced 900mm apart and embedded 800mm into the ground to support a working load of 900kN. Moment and shear capacity calculations are shown to check that the pile cap and pile reinforcement sizes are adequate to resist the bending and shear stresses from the applied load.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    89 views2 pages

    IFYUI

    Uploaded by

    jude
    This 3-sentence summary provides the key details from the document: The document presents the design calculations for a 3-pile group foundation with 300mm diameter piles spaced 900mm apart and embedded 800mm into the ground to support a working load of 900kN. Moment and shear capacity calculations are shown to check that the pile cap and pile reinforcement sizes are adequate to resist the bending and shear stresses from the applied load.

    Copyright:

    © All Rights Reserved
    Download as XLS, PDF, TXT or read online from Scribd
    Download as xls, pdf, or txt
    of 2

    Sheet1

    WRX CONSULTANTS
    DESIGN CALCULATION Page No :

    Project : PROJECT TNB.415 Structure : 3-PILE GROUP


    Computed By : HSLIM Date : ### Checked By : Date :

    S = 900 3-PILE-GROUP B

    C = 600 PILE SIZE ( dia. ) = 300 mm.sq.


    AS3 C/2
    Y PILE SPACING ( S) = 900 mm

    AS2 a= 300 mm
    E=
    814 b= 400 mm
    e a
    fcu = 30 N/mm2
    X b X
    fy = 460 N/mm2
    f AS3 AS3
    F= B= AS1 use 20 mm dia. bar
    557 550
    AS2 use 20 mm dia. bar
    Y
    A/2 AS1 AS3 use 20 mm dia. bar
    A = 1500
    e = 522 PILE WORKING lOAD ( WL ) = 900 KN
    f = 261
    ( D ) Minimum 700 mm
    Soffit of beam or slab D use 950 mm

    AS1 & AS3


    d D use
    950
    COL

    100
    AS2 150

    T13 - 250 Binders 50 Lean Concrete

    3-PILE-GROUP
    400 d= 800 mm

    MINIMUM DEPTH OF PILE CAP ( D )

    IF dia. < = 550 mm than D = 2.dia + 100 = 700 mm


    IF dia. > 550 mm than D = 1/3 ( 8.dia. - 600 ) = NA mm

    A = ( S / dia. + 1 )dia. + 300 = 1500 mm

    B = dia. + 250 = 550 mm

    C = dia. + 300 = 600 mm

    E = (( S/dia x 6/7 + 1 ) x dia. + 300 ) - F = 814 mm

    F = ( S/dia. x 2/7 + 1/2 ) x dia + 150 = 557 mm

    FILE : 3PILEGM
    Sheet2

    WRX CONSULTANTS
    DESIGN CALCULATION Page No :

    Project : PROJECT TNB.415 Structure : 3-PILE GROUP


    Computed By : HSLIM Date : ### Checked By : Date :

    MOMENT METHOD
    3-PILE-GROUP B
    ULTIMATE LOAD ( N ) = 3 x 1.5WL = 4050 KN

    PARALLEL TO X - X AXIS
    Moment ( M )= 1.5WL( e - b/2 ) = 435 KN.M
    M/C.d2 = 1.13
    K = M/C.d2.fcu 0.04
    Lever arm factor ( la ) = 0.5 + 0.25 - k / 0.9 = 0.95
    AS1 minimum = 0.15%B.D = 784 mm2
    AS1 required = M / 0.87.fy.la.d = 1429 mm2
    OK - more than AS1 minimum
    Required 4.55 NOS. T 20

    AS1 use 5 T 20

    PARALLEL TO Y-Y AXIS


    Moment ( M )= 1.5WL( S/2 - a/2 ) = 405 KN.M
    M/B.d2 = 1.15
    K = M/B.d2.fcu 0.04
    Lever arm factor ( la ) = 0.5 + 0.25 - K / 0.9 = 0.95
    AS2 minimum = 0.15%C.D = 855 mm2
    AS2 required = T / 0.87.fy = 1332 mm2
    OK - more than AS1 minimum
    Required 4.24 NOS. T 20

    AS2 use 5 T 20

    Minimum AS3 = 0.15% x 1000 x D = 1425 mm2


    T 20 at 220 mm

    AS3 use T 20 at 200

    Punching shear stress = N / ( 2(a+b)).d = 3.62 N/mm2


    OK - Less than 4.38 N/mm2

    X -X AXIS

    Shear v = 1.5WL / C.d = 2.81 N/mm2


    av = e - b/2 - dia/2 + dia/5 = 232 mm
    100AS2/C.d = 0.33
    vc = 0.46 N/mm2
    Enchanced shear stress = vc.2d / av = 3.19 N/mm2
    shear check Ok

    Shear v = 2 x 1.5WL / C.d = 5.63 N/mm2


    av = f - b/2 - dia/2 + dia/5 = -29 mm
    100AS2/C.d = 0.33
    vc = 0.46 N/mm2
    Enchanced shear stress = vc.2d / av = -25.53 N/mm2
    av negative value, shear OK

    Y -Y AXIS

    Shear v = 1.5WL / B.d = 3.07 N/mm2


    av = S/2 - a/2 - dia/2 + dia/5 = 210 mm
    100AS1/B.d = 0.36
    vc = 0.48 N/mm2
    Enchanced shear stress = vc.2d / av = 3.63 N/mm2
    shear check Ok

    You might also like