Narendar Singh-Resume-Mold Designer-3.5 Years Experience

Resume
NARENDAR SINGH
ADD. –FLAT NO. 406, ALFA BLOCK, TEMPLE GREEN VELLAKOTTAI, ORAGADAM, SRIPERUMBUDUR
DIST. KANCHIPURAM STATE- TAMILNADU_(CHENNAI) 602105
CONTACT NO- 9003368573, 9456459823
Email Id- [email protected]
Career Overview:
A professional, with overall 3.2 Years of experiences in Plastics Injection Mold Design,
Modification & 2D drafting as per STD documentation.
Design Engineer (Mold Designer).
Ability to communicate and motivate team members to enhance strategic goal and
bottom-line objective.
An effective communicator with strong analytical and relationship building
Looking for a challenging career development in the area of Mechanical Engineering and
would like to be a part of the dynamic team and contribute my skills and services to the
organizational growth as well as personal growth.
CurrentEmployer:
CTM India Ltd(from MAY 2016 to Present)

Design Engineer, Location: Chennai
CENTER TOOLING MOTHERSON INDIA LTD (CTMIL): -CENTER TOOLING
MOTHERSON INDIA LTD. (also known as CTMIL) is a part of SAMVARDHNA
MOTHERSON GROUP. CTMIL is in the business of manufacturing large Size Moulds
(from 05 - 35 tones). Since past 16 years and is specialized in AUTOMOTIVE MOULDS for
INTERIOR PARTS, EXTERIOR PARTS & LIGHTING SYSTEM. Company is ISO 9001–2008
Certificated. Customers of CTMIL are GENERAL MOTORS, TOYOTA, HONDA, MERCEDES-
BENZ,BMW, AUDI, SKODA, RENAULT, NISSAN, BHARATBENZ, MARUTI SUZUKI, FORD,
ASHOK LEYLAND, HYUNDAI and MAHINDRA etc.
Profession Credentials:
 Check DFM study of component by using CAD Tool Delcam software.

 3D assembly, Model and drawing quality checking.
 Check tooling feasibility of component & Electrode planning.
 Suggest product design changes wherever necessary as per plastic material
requirements.
 Good knowledge of Design & Development and Sign-Off Sheet activities.
 Researching the best possible components, materials and options fordesigning the
products.
 Tool Design- Core & Cavity layout design, Mold base design & Assembly.
 Design and created part drawing, assembly drawing including bill of materials and
detail drawings with application of GD & T for manufacturing.
 Designed Fixture to avoid Warpage, Assembly & Testing.
 Followed project from beginning to the end of the manufacturing processes to
ensure there were no conflicts.
 Present at the time of first Trial of Product on Molding Machine & Observe various
difficulties and solved on next Trial.
 Participating in design & project reviews internally as well as with customer.
 Follow up & track the present status of projects in Manufacturing Department on
the weekly development meeting.
 To perform the engineering change request analyses and implementation of
engineering change note.
 To update all related documents related to Moulddesign. ForExample, Data confirm
sheet, shrinkage sign-off sheet, ejection Sign-off etc.
 Preparation of general arrangement drawings, Bill of Materials.
 Good Knowledge of GD & T and different Drawings standards.
 Well-developed and effective Communication and Problem-Solving Techniques.
 Input review & feasibility study for all products development including ECN
implementations.
 Co-ordination with the clients regarding designs, 3D models, Modifications & new
development.
 Making RFQ (ready for quotation) for new part development and modifications.
 Making a Process Plan, Method plan for design & manufacturing injection Mould for new
Components.
Major Roles & Responsibilities
 Study the input for project, Understanding the requirements of customer, concept building
& Estimating the job.
 Worked for different projects, with different capacities in close association with designing
and engineering team.
 Handling for cavity & core full Mould and total Mould detailing & my Responsibly Mould tiles
injection Mould customer approves no of cavity (top plate electrode design type plate types
operation total feedback customer &Mould type tool cost etc.
 Concept design from customer input data.
 Final 3D modeling and detailing as per the customer requirement.
 Model and drawing quality checkup.
 Tool and product design planning
 Material selection as per the performance of the part.
 Managing product database as per CTMIL STD. and customers’ requirements.
 Complete wall thickness verification on the plastics front cover critical sections accordance
with input Drawing.
 Complete runner layout and Mould flow analysis in plastics adviser.
 Complete Mould cooling layout.
 Preparation of Sign off sheet as per the CTMIL standards.
 Design review meeting with the onsite team (CTMIL) for design clarifications.
 Preparation of Bill of Material, Material Indent, Issue of documentation and releasing to
manufacturing department.
 Hands on experience on designing of injection Moulds.
 Two plates and three plates Moulds with sliders and side core mechanisms.
 Knowledge on plastic material.
 Good knowledge on engineering drawings.
 Concept Making, Design Modification & Tool Design:
Major Project Details:
 Quarter trim (TOYOTA)

 Door console (TATA & MARUTI SUZUKI)
 Door trim (DAIMLER)
 Soporte adicional (BMW_SMP SPAIN)
 Befesttiungsschiene hi-li-re-v (MERCEDES BENZ_SMP GERMANY)
 Grundtraer f-spossfanger vo-li-re (MERCEDES BENZ_SMP GERMANY)
 Stutzteil stossfanger (VOLKSWAEN_SMP GERMANY)
 Glove box (IAC_MAHINDRA & MAHINDRA)
 Front bumper (DAIMLER INDIA CCOMMERIAL VEHICLES)
 Instrumenntal panel(ip) design support (RENAULT RBC PROJECT)
 Garnish upper & lower (TATA)
 A pillar(FORD)
 Lens cover (INDIAN JAPAN LIGHTING PVT LTD)
 Grill bar outer (FORD)
Software Proficiency:
 Delcam (AUTODESK-2019)
 AutoCAD (AUTODESK-2014)
 Unigraphics NX 9.0_(BASICS)
 Creo 2.0 _(BASIC)
 Microsoft Office Word, Microsoft Office Excel, Microsoft Office Power Point
 Tolerance study, GD&T, Stack up analysis
Strengths:
 Good communication & presentation skill

 Very flexible and adaptable to change
 Result focus & detail oriented
 Learning attitude, logical approach & hard working
 Responsible, operate with integrity and team work
 Ability to independently define problems, collect data, establish facts and draw conclusion
 Self-driven Attitude
Academic Credentials:
 Completed Post Diploma in Tool Design & manufacturing with CAD/CAM from CTTC
BHUBANESWAR with 70% marks in 2016.
 Completed Diploma in plastic mold design with CAD/CAM from CIPET AMRITSAR
with 68% marks in 2014.
 Completed 10th from U.P. BOARD with 55% marks in 2010.
PersonalProfile:
 NAME : NARENDAR SINGH

 FATHER’S NAME : SH. SURESH CHANDRA
 DOB : 14-06-1996
 SEX : MALE
 NATIONALITY : INDIAN
 LANGUAGE KNOWS : HINDI, ENGLISH
 PERMANENT ADD : VILL.- MURAITHA, POST-BAISOLI GHAT,
DISTRICT - ETAWAH, U.P. 206126.
 MARITAL STATUS : SINGLE

 NATIONALITY : INDIAN
Declaration:
I hereby declare that the particulars endowed above are true to the best of myknowledge and
belief.
Date:
Place: Chennai NARENDAR SINGH

Narendar Singh-Resume-Mold Designer-3.5 Years Experience

Uploaded by

Copyright:

Available Formats

Narendar Singh-Resume-Mold Designer-3.5 Years Experience

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Narendar Singh-Resume-Mold Designer-3.5 Years Experience

Uploaded by

Copyright:

Available Formats

Resume

CTM India Ltd(from MAY 2016 to Present)

 Check DFM study of component by using CAD Tool Delcam software.

 Quarter trim (TOYOTA)

 Good communication & presentation skill

 Completed 10th from U.P. BOARD with 55% marks in 2010.

 NAME : NARENDAR SINGH

 MARITAL STATUS : SINGLE

You might also like