Parts 900-2009 - Eng PDF

Download as pdf or txt
Download as pdf or txt
You are on page 1of 396

BELARUS

900/900.2/900.3
920/920.2/920.3
950/950.2/950.3
952/952.2/952.3
900-0000010 KDS

CATALOGUE OF PARTS AND


ASSEMBLY UNITS
The Catalogue has been compiled by Engineer of the Department for Designing and Experi-
mental Works 1 E. N. Bogdanovich. The initial data were provided by the leading specialists
of the Chief Specialized Design Department of the Minsk Tractor Works (MTZ) Republican
Unitary Enterprise.

Editor-in-chief: Chief Designer of the MTZ Production Group – Director of the Scientific and
Technical Centre of the MTZ Republican Unitary Enterprise I.N. Uss.

Editor in charge: Chief Designer for Tractor Production: A.G.Stasilevich

Responsible for the issue: Chief of the Design Department for Maintenance Documentation
O.N.Natalevich

The MTZ Republican Unitary Enterprise carries out continual work for improving the products be-
ing manufactured and reserves the right of modification of the design and specifications without
notifying preliminarily the customers.
Some designations, names and illustrations may differ from those appearing on your tractor. For
detailed information, please, contact your dealer and use the information bulletins being issued by
the MTZ Production Group and distributed to the customers on a regular basis.

© Minsk Tractor Works Republican Unitary Enterprise, 2009


All rights reserves. This book shall not be reproduced or copied fully or partially without written authoriza-
tion of the Minsk Tractor Works Republican Unitary Enterprise.

-2-
CONTENTS

Introduction...................................................................................................................... 4
How to Use the Catalogue .............................................................................................. 4
Purpose ........................................................................................................................... 5
Index of the Groups, Subgroups of Assembly Units and Parts of the Catalogue ........... 7
Assembly Units and Parts ............................................................................................... 12

-3-
INTRODUCTION

The present Catalogue contains the complete spectrum of assembly units and parts of
Belarus 900/900.2/900.3/920/920.2/920.3/950/950.2/950.3/952/ 952.2/952.3 tractors. The
Catalogue is intended for organizations and firms carrying out the sales, operation and repair
of the tractors; it may be used for calculating and drawing up the applications for spare parts
and as a reference book for disassembling and reassembling a tractor.
Any modifications related to the improvement of the design of the tractors are reflected
in appropriate data sheets.

HOW TO USE THE CATALOGUE

The Catalogue includes the assembly units and parts of the tractor:

The assembly units and parts are divided into groups and subgroups according to the
functional sign. This section is well illustrated with exploded axonometric images of compo-
nent parts of the tractor. All the parts on the figures are provided with position numbers. To
make the use of the catalogue more convenient when searching the required part, the same
position numbers are given in the column “Position Nos.” in the textual part of the Catalogue in
the increasing order top-down. Being thoroughly elaborated in the artistic aspect, the figures
provided in the catalogue allow the user to get familiar with the design of the parts and subas-
semblies and their configuration as well as can be a reference for carrying out the dismantling
and re-mounting operations.
For example, the Catalogue contains the following entry:

“...240-1004100-А 4 Connecting rod (13, 20, 21, 37-39)”.

It means that the assembly unit named “connecting rod” in the quantity of four units per
engine consists of the following parts: bush (pos. 21), connecting rod (pos. 20), connecting
rod bolt (pos. 13), connecting rod cap (pos. 39), washer (pos. 38) and nut (pos. 37). The col-
umn “Quantity” specifies the number of assembly units and parts used in this subgroup
(1004) per tractor.
For the tractors, the traditional seven-digit system of designation of assembly units and
parts (to the right from the prefix) is adopted.
The suffices A1, A2, A3 after the seven-digit number of the part mean that the design of
these parts or assembly units has been modified, but remains interchangeable with the pre-
viously released design. The suffices Б, Б1, Б2, В, Г, Д, etc. mean that the new designs of the
parts will not be interchangeable with the parts of the previously released designs, but mu-
tually interchangeable within the same symbol.
The digital suffices after the number of the part or assembly unit, for example, 01, 02,
03, etc. characterize the design of the part or assembly unit (either embodiment or climatic
solution) and these parts are not interchangeable.
For example, the parts “240-1104300-01 (shell of the 1st cylinder)” and “240-1104300-
02 (shell of the 2nd cylinder)” have different embodiment and are not interchangeable.
Some parts adapted from the tractors of previous models have alphanumerical num-
bers. For example, “Д18-055-А-01 Seal ring”.

-4-
PURPOSE

The BELARUS-900/900.2/900.3/920/920.2/920.3/950/950.2/950.3/952/952.2/952.3
wheeled universal tilling tractors belong to drawbar category 1.4 and are designed to perform
a wide range of agricultural works: from soil preparation for sowing to harvesting and trans-
porting operations; they can be used in forestry, municipal servicing, construction and indus-
try.
BELARUS-900 (4х2) with the Д-243 diesel engine (59.6 kW/2200 rpm) and synchronized
gearbox;
BELARUS-900.2 (4х2) with the Д-243 diesel engine (59.6 kW/2200 rpm), synchronized
gearbox and updated design;
BELARUS-900.3 (4х2) with the Д-243.43 S2 diesel engine (62 kW/1800 rpm), synchronized
gearbox and updated design;
BELARUS-920 (4х4) with the Д-243 diesel engine (59.6 kW/2200 rpm), synchronized gear-
box and FDA (72-);
BELARUS-920.2 (4х4) with the Д-243 diesel engine (59.6 kW/2200 rpm), synchronized
gearbox, FDA (822-) and updated design; BELARUS-920.3 (4х4) with the Д-245.43 S2 diesel en-
gine (62 kW/1800 rpm), synchronized gearbox, FDA (822-) and updated design;
BELARUS-950 (4х2) with the Д-245.5 diesel engine (65 kW/1800 rpm), synchronized gear-
box;
BELARUS-950.2 (4х2) with the Д-245.5 diesel engine (65 kW/1800 rpm), synchronized
gearbox and updated design;
BELARUS-950.3 (4х2) with the Д-245.5 S2 diesel engine (65 kW/1800 rpm), synchronized
gearbox and updated design;
BELARUS-952 (4х4) with the Д-245.5 diesel engine (65 kW/1800 rpm), synchronized gear-
box and FDA (72-);
BELARUS-952.2 (4х4) with the Д-245.5 diesel engine (65 kW/1800 rpm), synchronized
gearbox, FDA (822-) and updated design;
BELARUS-952.3 (4х4) with the Д-245.5 S2 diesel engine (70 kW/1800 rpm), synchronized
gearbox, FDA (822-) and updated design.

The index “.2” means upgrading of the respective model by installing one or several
units of higher engineering level:
- Front driving axle with planetary reduction gears (for 4x4 tractors);
- Hydraulic lift-based hook-up;
- Bonnet, roof, cab fender of updated design.

The index “.3” means the equipment of the tractors with diesel engines with index S2
certified in accordance with the 2nd stage of the ecological regulation of Directive 2000/25/EC,
hydrostatic power steering (HPS) system with an independent oil tank, as well as the bonnet,
roof and cab fenders of an updated design.

The distinctive features of the tractors presented in the Manual:


- Transmission with the synchronized gearbox (7/2) and synchronized reduction gear
(step-up gear): 14 forward and 4 reverse gears.
- Hydrostatic power steering (HPS) with the Danfoss metering pump, cylinder in steer-
ing trapezium and steering tie rod.
- Unified rear driving axle with more convenient external readjustment of planetary gear
brake bands.

-5-
- Hydraulic system with a power regulator completely controlling the rear attachment
cylinder. Three sections of the distributor ensure the control of external cylinders of machines
and tools.
- Safe comfortable cab complies with the requirements of the EC and OECD directives
and is featured by the improved interior, heating and ventilation system.

-6-
INDEX OF GROUPS, SUBGROUPS, ASSEMBLY UNITS AND PARTS OF THE CATA-
LOGUE
Group Subgroup Fig. No. Description Page
11 Feeding system
1101 11.1 Fuel tanks (metallic) 12
1101 11.2 Fuel tanks (plastic) 14
1101 11.3 Fuel tank (if the tractor is equipped with a hydraulic host) 16
1108 11.4 Fuel feeding control 18
1108 11.5 Fuel feeding control (if the tractor is equipped with a hydraulic 20
host)
1108 11.6 Fuel feeding control (with the Joystick-type control of hydraulic 24
mounted system)
1109 11.7 Donaldson air cleaner assembly 26
(for Д-245.5S2/Д-245.43S2)
12 Exhaust system
1205 12.1 Silencer 28
13 Cooling system
1301, 1302 13.1 Cooling unit 30
(for Belarus -900/900.2/920/920.2/950/950.2/952/952.2)
1306 13.2 Cooling unit (for Д-245.5S2/Д-245.43S2) 34
1309 13.3 Fan guard 36
1310 13.4 Shutter 38
1317 13.5 Charge air cooler 40
(for Д-245.5S2/Д-245.43S2)
16 Clutch
1601 16.1 Clutch assembly 240-1005009-03 42
1601 16.1а Clutch assembly 240-1005009-06 44
1601 16.2 Clutch casing 46
1601 16.3 Clutch casing. Shifter 50
1601 16.4 Clutch casing (PTO drive, mounted attachment hydraulic sys- 52
tem pump drive)
1601 16.5 Clutch casing. PTO drive. (neng=2200 rpm) 54
1601 16.5а Clutch casing. PTO drive. (neng=1800 rpm) 54
1602 16.6 Clutch control 56
17 Gearbox
1721 17.1 Mechanical splitter/ mechanical multiplier 58
1721 17.2 Synchronized splitter/ synchronized multiplier 60
1723 17.3 Mechanical (synchronized) splitter/multiplier control 62
Table of equipment of the tractor models with gearboxes 64
1721 17.4 Synchronized reverse gear 68
1723 17.5 Synchronized reverse gear control 70
1701 17.6 Gearbox casing. FDA drive. 72
1701 17.7 Input and output shafts of the mechanical gearbox 74
1701 17.8 Input shaft of the synchronized gearbox 76
1701 17.9 Output shaft of the synchronized gearbox 78
1701 17.10 Shaft of the first gear and reverse 80
1701 17.11 Intermediate shaft. Internal shaft. 82
1702 17.12 Mechanical gearbox control mechanism. Fork body. 84
1702 17.13 Synchronized gearbox control mechanism. 86
Fork body.
1703 17.14 Right single-lever gearbox control mechanism 88
1703 17.15 Right two-lever gearbox control mechanism 90

-7-
INDEX OF GROUPS, SUBGROUPS, ASSEMBLY UNITS AND PARTS OF THE CATA-
LOGUE
Group Subgroup Fig. No. Description Page
18 Transfer gearbox
1802 18.1 Transfer gearbox (for Belarus-920/920.2/920.3/952/952.2/952.3) 92
1802 18.2 Transfer gearbox control (for single-lever gearbox control mech- 96
anism)
1802 18.3 Transfer gearbox control (for two-lever gearbox control mecha- 98
nism)
Cardan drive
Cardan shaft. Intermediate cardan shaft bearing (for Belarus-
2203, 2209 22.1 98
22 920/920.2/920.3/952/952.2/952.3)
1802 18.2 Transfer gearbox control (for single-lever gearbox control mech- 94
anism)
23 Front driving axle
2300 23.1 Front driving axle 72-2300020-А. 102
2300 23.2 Front driving axle 822-2300020 104
2302 23.3 Front driving axle final drive 106
2303 23.4 Differential 108
Final drive reduction gear of the front driving axle (for FDA 72-
2308 23.5 110
2300020-А)
Final drive reduction gear of the front driving axle
2308 23.6 114
(for FDA 822-2300020)
24 Rear axle
2401, 2407 24.1 Rear axle casing. Final drive 118
2403 24.2 Differential. Bearing cage 120
2409 24.3 Differential lock mechanism 122
2409 24.4 Wet-type differential lock mechanism 124
27 Traction hitch mechanism
2707 27.1 Hitch. Hook version (optional). 126
2707 27.2 Hitch. “Pendulum” or “trailer” version (optional). 128
2707 27.3 Traction hitch mechanism 132
2707 27.4 Traction hitch mechanism (equipment versions) 134
28 Frame
2801 28.1 Semiframe 136
2805 28.2 Towing arrangement 138
2807 28.3 Hydroficated drawbar 140
30 Front axle
3000 30.1 Front axle and steering link 142
31 Wheels and hubs
Front guide wheels. Front wheel hubs. (for tractors with front
3101, 3103 31.1 144
axle)
3101 31.2 Front driving wheels 146,
31.3 148
31.4
3104, 3107 31.5 Rear driving wheels. Rear wheel hubs 150
34 Steering
3401 34.1 Steering column 152
3407 34.2 Steering fittings 154
HPS hydraulic cylinder and fittings
3405, 3407 34.3 158
(version with front axles)
HPS hydraulic cylinder and fittings
3405,3407 34.4 160
(FDA 72-2300020-A-04)
3405 34.5 Hydraulic cylinder 50x25-200 162
Hydraulic cylinder Ц63 and HPS fittings
3405,3407 34.6 164
(FDA 822-2300020-04 or FDA 822-2300020-02/-04)
3405 34.7 Hydraulic cylinder Ц63 (63x30-200) 166
3407 34.8 Steering with the FDA 822-2300020-04 and separate tank 168
3407 34.9 Tank 172

-8-
INDEX OF GROUPS, SUBGROUPS, ASSEMBLY UNITS AND PARTS OF THE CATA-
LOGUE
Group Subgroup Fig. No. Description Page
35 Brakes
3502, 3503 35.1 Service brakes. Brake control (dry friction) 174
3502 35.2 Brakes (design version) 176
3502 35.3 Wet brakes (left/right) 178
3504, 3507 35.6 Parking brake. Parking brake control (for wet brakes) 186
Pipelines and fittings of the single-line pneumatic actuator of
3506 35.7 190
the trailer brakes
Pipelines and fittings of the two-line pneumatic actuator of the
3506 35.8 192
trailer brakes
3513 35.9 Bottle 194
3512 35.10 Brake valve (for single-line pneumatic actuator) 194
3509 35.11 Compressor 196
3509 35.12 Choke assembly (for tractors without pneumatic compressor) 198
37 Electric equipment
3709, 3710 37.1 Electric equipment for the engine 200
Electric equipment for the engine (for Belarus tractors -
3709,3710 37.2 202
900.3/920.3/950.3/952.3)
3700 37.3 Electric equipment for the transmission 204
3700 37.4 Electric equipment for the cab 206
3701 37.5 Alternator 210
3703 37.6 Storage battery pack (starting system 12 V) 212
3703 37.7 Storage battery pack (starting system 24 V) 212
3703 37.8 Storage battery pack 214
3707 37.9 Electric torch pre-heater 216
3708 37.10 Starter 218
3711 37.11 Road headlight assembly 220
3712 37.12 Front light assembly 220
3712 37.13 Front light assembly 222
3716 37.14 Rear light assembly 224
38 Instrumentation
3805 38.1 Base, instruments 226
3805 38.2 Wall, cover 230
39 Tools and accessories
3901 39.1 Operator tools 232
3912 39.2 First-aid kit 232
42 Power take-off
4202 42.1 Rear power take-off shaft 234
4202 42.2 Rear power take-off shaft 238
4211 42.3 Driving pulley 242
4204 42.4 Side power take-off shaft 244
4216 42.5 Rear power take-off shaft control 246
Rear power take-off shaft control (for tractors with hydraulic
4216 42.6 248
lift and lift hitch mechanism)
4235 42.7 Ballast 250
4235 42.8 Front ballast 252
46 Hydraulic system
4605 46.1 Rear mounted attachment (for tractors with power governor) 254
4605 46.2 Rear mounted attachment (for tractors with power governor) 260
4605 46.3 Rear mounted attachment (for tractors with hydraulic lift) 266
4605 46.4 External interlock of the lower rods 272

-9-
INDEX OF GROUPS, SUBGROUPS, ASSEMBLY UNITS AND PARTS OF THE CATA-
LOGUE
Group Subgroup Fig. No. Description Page
46 4605 46.5 Telescopic drawbar 274
4607 46.6 Hydraulic system Р85-4600015 276
4607 46.7 Hydraulic system Р90-4600010 280
4607 46.8 Hydraulic system Р1221-4600010 282
4607 46.9 Hydraulic system casing Р1221-4600010 284
4607 46.10 Hydraulic system 80-4600010-Б 288
4607 46.11 Hydraulic units and fittings (with power governor). 290
Hydraulic units and fittings (with hydraulic lift and distributor RS
4607 46.12 292
213 MITA)
Hydraulic units and fittings (if the tractor is equipped with a hy-
4607 46.13 294
draulic host)
Hydraulic units and fittings of the hydraulic system with rope
4607 46.14 296
control of the distributor (Joystick type)
4607 46.15 Hydraulic system casing and filter 298
4604 46.16 Pump drive 302
Ц 100 46.17 Hydraulic cylinder Ц 100x200 304
Р80 46.18 Hydraulic distributor Р80-3/4-222-ЗГг 306
4607 46.19 Hydraulic distributor control Р80 309
РП70 46.20 Hydraulic distributor РП70 312
Hydraulic distributor control RS213 Mita, RS 213 Belarus, РП
4607 46.21 316
70
М036.50Б 46.22 Quick-connection coupling 318
4619 46.23 Retention mechanism 320
4614 46.24 Governor 322
4616 46.25 Governor control 326
Governor control (Hydraulic mounted system with combined
4616 46.26 328
adjustment)
4616 46.27 Switch (Hydraulic mounted system with combined adjustment) 330
4618 46.28 Mixer 332
4625 46.29 Hydraulic lift cylinder 334
4634 46.30 Hydraulic lift distributor 336
4635 46.31 Hydraulic lift control 338
4635 46.32 Hydraulic lift 340
48 Differential lock control
4801 48.1 Differential lock control of the rear axle 342
67 Tractor cab
6700 67.1 Tractor cab. Rear fenders 344
6700 67.2 Tractor cab. Rear fenders 348
6700 67.3, Roof 352
67.4
6700 67.5 Canopy framework. Base 354
6702 67.6 Cab floor 356
6708 67.7 Cab doors 358
68 Seat
6800 68.1 Operator seat 360
6804 68.2 Operator seat 364
6801 68.3 Seat suspension 366
6809 68.4 Additional seat 370
81 Heater
8101 81.1 Heater 372
82 Cab accessories
8201 82.1 Internal rear-view mirror 376
8201 82.2 Side rear-view mirror 376
8204 82.3 Sun visor 376

- 10 -
INDEX OF GROUPS, SUBGROUPS, ASSEMBLY UNITS AND PARTS OF THE CATA-
LOGUE
Group Subgroup Fig. No. Description Page
84 Empennage
8400 84.1 Facing 378
8400 84.2а Facing (left-side view) 382
8400 84.2б Facing (right-side view) 383
8400 84.2в Facing (sections) 384
8405 84.3 Footstep 387
8403 84.4 Front fenders (with FDA 72-2300020-А) 388
8403 84.5 Front fenders (for FDA 822-2300020-02) 390
8403 84.6 Front fenders (for FDA 822-2300020-04 with short tubes) 392
Control system
87 Differential lock and PTO control (electrical part) for Belarus-
8700 87.1 394
920.2/920.3/952.2/952.3

- 11 -
Fig.11.1. Fuel tanks (metallic)

- 12 -
Group 11. Feeding system
Subgroup 1101. Fuel tanks (metallic)

Fig. No Pos.
Designation Q-ty Description
No.
11.1 70-1101005 1 Tanks
1 70-1101020 1 Tank (metallic)
2 70-1101070 4 Clamp
3 70-1101035-Б 1 Hose pipe
4 ХС-66 2 Clamp
5 70-1101010 1 Tank
80-1101520 1 Plastic tank
6 В.М5-6gх12.58.019 ГОСТ 17473-80 5 Screw
7 80-1101067 5 Washer
АР70.3827 or
8 1 Fuel level sensor
ДУМП-21М
9 200-3806026 1 Gasket
10 80-1101250-Б 2 Right bracket
11 М10-6gх25.88.35.019 ГОСТ 7796-70 12 Bolt
12 10 ОТ ОСТ 37.001.115-75 12 Washer
13 М10-6Н.6.019 ГОСТ 5915-70 12 Nut
14 80-1101012-Б 8 Gasket
15 ПР-36-01 8 Gasket
16 85-1101002-02 1 Tube
17 822-1101081 2 Connecting pipe
18 ПП6-1 2 Cock
19 70-1101042 2 Cramp
20 50-1111102-01 2 Gasket
21 920П-1101210 1 Fuel pipeline
22 12 ОТ ОСТ 37.001.115-75 8 Washer
23 М12-6gх30.88.35.019 ГОСТ 7796-70 8 Bolt
24 80-1101280-Б 2 Left bracket
25 36-1101070 1 Chain
26 082-1103010 1 Plug
27 36-1104787 1 Bolt
28 36-1104788 2 Gasket
29 920-1101160-01 1 Fuel pipeline
30 11,113-100 ГОСТ 3722-81 1 Ball
31 920П-1101240-05 1 Fuel pipeline
32 Д18-051 1 Bolt
33 Д18-055А-01 2 Seal ring

ГОСТ – State Standard (translator’s note)


ОСТ – Industrial branch standard (translator’s note)

- 13 -
Fig.11.2. Fuel tanks (plastic)

- 14 -
Group 11. Feeding system
Subgroup 1101. Fuel tanks (plastic)
Fig. No Pos.
Designation Q-ty Description
No.
11.2 70-1101005 1 Tanks
1 80-1101510 1 Plastic tank
2 70-1101070 4 Clamp
3 70-1101035-Б 1 Hose pipe
4 ХС-66 2 Clamp
5 80-1101520 1 Plastic tank
6 В.М5-6gх12.58.019 ГОСТ 17473-80 5 Screw
7 80-1101067 5 Washer
АР70.3827 or
8 1 Fuel level sensor
ДУМП-21М
9 200-3806026 1 Gasket
10 80-1101250-Б 2 Right bracket
11 М10-6gх25.88.35.019 ГОСТ 7796-70 12 Bolt
12 10 ОТ ОСТ 37.001.115-75 12 Washer
13 М10-6Н.6.019 ГОСТ 5915-70 12 Nut
14 80-1101012-Б 8 Gasket
15 ПР-36-01 8 Gasket
16 80-8101015-02 1 Tube
17 822-1101081 1 Connecting pipe
18 ПП6-1 2 Cock
19 70-1101042 2 Cramp
20 50-1111102-01 2 Gasket
21 920П-1101210 1 Fuel pipeline
22 12 ОТ ОСТ 37.001.115-75 8 Washer
23 М12-6gх30.88.35.019 ГОСТ 7796-70 8 Bolt
24 80-1101280-Б 2 Left bracket
25 36-1101070 1 Chain
26 082-1103010 1 Plug
27 36-1104787 1 Bolt
28 36-1104788 2 Gasket
29 920-1101160-05 1 Fuel pipeline
30 11,113-100 ГОСТ 3722-81 1 Ball
31 920П-1101240-05 1 Fuel pipeline
32 Д18-051 1 Bolt
33 Д18-055А-01 2 Seal ring

- 15 -
Fig.11.3. Fuel tanks

- 16 -
Subgroup 1101. Fuel tank
(if the tractor is equipped with a hydraulic host)

Fig. No Pos.
Designation Q-ty Description
No.
11.3 1 1221-1101690-01 2 Clamp
2 М6-6gx10.58.019 ГОСТ 17473-80 4 Screw
3 6Т ОСТ 37.001.115-75 4 Washer
4 М6-6Н.6.019 ГОСТ 5915-70 4 Nut
5 ДУМП-21М 1 Fuel level gauge sensor
6 200-3806026 1 Gasket
7 80-1101067 5 Washer
8 В.М5-6gх16.58.019 ГОСТ 17473-80 5 Screw
9 920-1101160-05 1 Tube
10 36-1104788 2 Gasket
11 36-1104787 1 Connecting pipe bolt
12 920П-1101240-05 1 Fuel pipeline
12а 920П-1101240-08 1 Fuel pipeline
13 1221-1101530 2 Fuel intake
14 Д18-055А-01 4 Seal ring
15 ПР-43-03 4 Seal УМ6
16 1221-1101690 2 Clamp
17 1221-1101510 1 Tank
18 1221-1101620 1 Angle piece
19 082-1103010 1 Plug
20 85-1101002-03 1 Tube
21 36-1101070 1 Chain
22 С 8.01.019 ГОСТ 11371-78 1 Washer
23 8Т ОСТ 37.001.115-75 1 Washer
24 М8-6gх20.88.35.019 ГОСТ 7796-70 1 Bolt
25 11,112-100 ГОСТ 3722-81 1 Ball
26 822-1101081 1 Connecting pipe
27 920-1101280 1 Filler neck
28 XC-66 2 Clamp
29 70-1101035-Б 1 Hose pipe
30 М12-6gх45.88.35.019 ГОСТ 7796-70 8 Bolt
31 12 ОТ ОСТ 37.001.115-75 8 Washer
32 1221-1101130 4 Bracket
33 М10-6Н.04.019 ГОСТ 5916-70 12 Nut
34 10 ОТ ОСТ 37.001.115-75 8 Washer
35 С 10.01.019 ГОСТ 11371-78 12 Washer
36 М10-6gх25.88.35.019 ГОСТ 7796-70 8 Bolt

- 17 -
Bracket

Fig.11.4. Fuel feeding control

- 18 -
Subgroup 1108. Fuel feeding control
Fig. No. Pos.
Designation Q-ty Description
No.
11.4 1 80В-1108545 1 Bracket
2 2х12.019 ГОСТ 397-79 9 Cotter pin
3 80B-1108506 4 Lever
4 3,2х18.019 ГОСТ 397-79 9 Cotter pin
5 80B-1108542 2 Rod tip
6 70-1601109-01 9 Pin
7 80B-1108503 1 Rod
8 80B-1108365 1 Lever
9 80B-1108360 1 Shaft
10 М8-6Н.6.019 ГОСТ 5915-70 6 Nut
11 70-1108317 1 Boss
12 80B-1108537 1 Rod
13 80B-1108343 1 Rod
14 80B-1108344 1 Rod
15 80B-1108380 1 Bracket
16 М6-6gх20.88.35.019 ГОСТ 7798-70 4 Bolt
17 6Т ОСТ 37.001.115-75 8 Washer
18 М6-6Н.6.019 ГОСТ 5915-70 5 Nut
19 80B-1108341 1 Plate
20 8Т ОСТ 37.001.115-75 1 Washer
21 С 10.01.019 ГОСТ 11371-78 1 Washer
22 80-1108028 2 Washer
23 80-1108178 1 Friction washer
24 A13.11.000 1 Handle
25 80B-1108350 1 Handle
26 80B-1108347 1 Disk spring
27 М14х1,5-6Н.6.019 ГОСТ 5915-70 2 Nut
28 80B-1108370 1 Bracket
29 A13.36.001 1 Boot
30 М10-6gх25.88.35.019 ГОСТ 7796-70 2 Bolt
31 10 ОТ ОСТ 37.001.115-75 2 Washer
32 М6-6gх12.88.35.019 ГОСТ 7798-70 2 Bolt
33 80B-1108346 1 Bracket
34 50-1108044 1 Key
35 М6-6gх30.88.35.019 ГОСТ 7798-70 1 Bolt
36 М8-6gх25.88.35.019 ГОСТ 7796-70 1 Bolt
37 70-4803019 1 Spring
38 С 8.01.019 ГОСТ 11371-78 4 Washer
39 80B-1108510 1 Pedal
40 80B-1108526-01 1 Rod
41 8х30 ОСТ 37.001.163-75 1 Pin
42 80В-1108344-01 1 Rod
1220-1108344-А*/**
43 80В-1108530 1 Bracket
800-1108530-А*/**
44 80В-1108541 1 Rod
1025-1108541-01**/(-02,-03)*
45 В.М4-6gх10.58.019 ГОСТ 17473-80 1 Screw
46 70-1310441 1 Catch
47 80-1108317 1 Boss
48 80-1108126 1 Bracket
49 80-1108630-А-01 1 Cable
50 М12х1,25-6Н.6.019 ГОСТ 5915-70 1 Nut
51 С 12.01.019 ГОСТ 11371-78 1 Washer
52 80-1024211 1 Shield
53 А30.04.017 2 Cap
54 М6-6gх12.88.35.019 ГОСТ 7798-70 2 Bolt
* 900.2/920.2/950.2/952.2
** 900.3/920.3/950.3/952.3

- 19 -
Fig.11.5. Fuel feeding control (if the tractor is equipped with a hydraulic host)

- 20 -
Group 11. Feeding system
Subgroup 1108. Fuel feeding control (if the tractor is equipped with a hydraulic host)
Fig. No. Pos.
Designation Q-ty Description
No.
11.5 1 80В-1108570 1 Bracket
2 2х12.019 ГОСТ 397-79 4 Cotter pin
3 80B-1108506 2 Lever
4 3,2х18.019 ГОСТ 397-79 9 Cotter pin
5 80B-1108542 2 Rod tip
6 70-1601109-01 4 Pin (6х22)
7 80B-1108503 1 Rod
8 80B-1108365 1 Lever
9 80B-1108360 1 Shaft
10 М6-6Н.6.019 ГОСТ 5915-70 10 Nut
11 75-1108333 1 Coupling
12 600-1108017 1 Boss
13 75-1108313 1 Rod
14 75-1108312 1 Coupling
15 1021-1108509 1 Bracket
16 6Т ОСТ 37.001.115-75 8 Washer
17 1021-1108508 1 Bracket
18 М6-6gх20.88.35.019 ГОСТ 7798-70 6 Bolt
19 М8-6gх20.88.35.019 ГОСТ 7796-70 3 Bolt
20 8Т ОСТ 37.001.115-75 4 Washer
21 1221-1108105 1 Bracket
22 80-1108028 2 Washer
23 80-1108178 1 Friction washer
24 A13.11.000 1 Handle
25 1021-1108350 1 Handle
26 80B-1108347 1 Disk spring
27 М14х1,5-6Н.6.019 ГОСТ 5915-70 2 Nut
28 80B-1108317 1 Boss
29 80B-1108300-А-05 1 Cable
30 М6-6gх12.88.35.019 ГОСТ 7798-70 2 Bolt
31 50-1108044 1 Key
32 М6-6gх30.88.35.019 ГОСТ 7798-70 1 Bolt
33 A13.36.001 1 Boot
34 М10-6gх25.88.35.019 ГОСТ 7796-70 2 Bolt
35 10 ОТ ОСТ 37.001.115-75 2 Washer
36 80B-1108510 1 Pedal
37 80B-1108526-01 1 Rod
38 8х30 ОСТ 37.001.163-75 1 Pin
39 1220-1108344-А 1 Rod
40 800-1108530-А 1 Bracket
41 М8-6Н.6.019 ГОСТ 5915-70 4 Nut
1025-1108541 1 Rod
42
1025-1108541-01**/(-02,-03)*
43 С 8.01.019 ГОСТ 11371-78 4 Washer
44 М8-6gх25.88.35.019 ГОСТ 7796-70 1 Bolt
45 В.М4-6gх10.58.019 ГОСТ 17473-80 1 Screw
46 70-1310441 1 Catch
47 80-1108317 1 Boss
48 80-1108126 1 Bracket
49 80-1108630-А-01 1 Cable
50 М12х1,25-6Н.6.019 ГОСТ 5915-70 1 Nut
51 С 12.01.019 ГОСТ 11371-78 1 Washer
52 80-1024211 1 Shield
53 А30.04.017 2 Cap
* 900.2/920.2/950.2/952.2
** 900.3/920.3/950.3/952.3

- 21 -
Fig.11.5. Fuel feeding control (if the tractor is equipped with a hydraulic host)

- 22 -
Group 11. Feeding system
Subgroup 1108. Fuel feeding control (if the tractor is equipped with a hydraulic host)
Fig. No. Pos.
Designation Q-ty Description
No.
11.5 54 М6-6gх12.88.35.019 ГОСТ 7798-70 2 Bolt
56 70-3723023 1 Bush
57 70-4803019 1 Spring
58 80В-1108341 1 Plate
59 С 10.01.019 ГОСТ 11371-78 1 Washer

- 23 -
Stop lever

Fuel feeding control lever

Fuel pump

Fig.11.6. Fuel feeding control


(with the Joystick-type control of hydraulic mounted system)

- 24 -
Group 11. Feeding system
Subgroup 1108. Fuel feeding control
(with the Joystick-type control of hydraulic mounted system)
Fig. No. Pos.
Designation Q-ty Description
No.
11.6 1221-1108070 1 Rod (5, 9, 11)
1221-1108080 1 Rod (5, 7, 9)
1 80В-1108545 1 Bracket
2 2х12.019 ГОСТ 397-79 6 Cotter pin
3 80В-1108506 3 Lever
4 3,2х18.019 ГОСТ 397-79 7 Cotter pin
5 80В-1108542 4 Rod tip
6 70-1601109-01 6 Pin
7 1221-1108029 1 Rod
8 1221-1108045 1 Bracket
9 М8-6Н.6.019 ГОСТ 5915-70 10 Nut
10 8Т ОСТ 37.001.115-75 5 Washer
11 1221-1108073 1 Rod
12 М8-6gх25.88.35.019 ГОСТ 7796-70 2 Bolt
13 1221-1108020 1 Bracket
14 922-1108146 1 Rod
15 А13.11.00 1 Handle
16 М14х1,5-6Н.6.019 ГОСТ 5915-70 2 Nut
17 80В-1108347 2 Disk spring
18 80-1108178 2 Friction washer
19 822-1108028 1 Washer
20 1221-1108035 1 Roller
21 70-1108317 1 Boss
22 А13.36.001 1 Boot
23 М10-6gх25.88.35.019 ГОСТ 7796-70 2 Bolt
24 10 ОТ ОСТ 37.001.115-75 2 Washer
25 М6-6gх30.88.35.019 ГОСТ 7798-70 1 Bolt
26 М6-6Н.6.019 ГОСТ 5915-70 1 Nut
27 70-4803019 1 Spring
28 С 8.01.019 ГОСТ 11371-78 4 Washer
29 80В-1108510 1 Pedal
30 80В-1108526 1 Rod
31 8х30 ОСТ 37.001.163-75 1 Pin
32 80В-1108344-01 1 Rod
1220-1108344-А*/**
33 80В-1108530 1 Bracket
800-1108530-А*/**
34 80В-1108541 1 Rod
1025-1108541-01**/(-02,-03)*
35 А30.04.017 2 Cap
36 6Т ОСТ 37.001.115-75 2 Washer
37 М6-6gх12.88.35.019 ГОСТ 7798-70 2 Bolt
38 80-1108630-А-01 1 Cable
39 80-1108126 1 Bracket
40 80-1108317 1 Boss
42 70-1310441 1 Catch
43 В.М4-6gх10.58.019 ГОСТ 17475-80 1 Screw
* 900.2/920.2/950.2/952.2
** 900.3/920.3/950.3/952.3

- 25 -
2 or 12 or 16

Fig.11.7. Donaldson air cleaner assembly (Д-245.5S2/Д-245.43S2)

- 26 -
Subgroup 1109. Donaldson air cleaner assembly
(Д-245.5S2/Д-245.43S2)

Fig. No. Pos.


Designation Q-ty Description
No.
11.7 1 1025-1109010 1 Pipe
2 1025-1109006 1 Branch pipe (allowed substitution for pos.
12 or 16)
3 245-1008029 1 Branch pipe
6 М8-6gx25.88.35.019 ГОСТ 7796-70 2 Bolt
7 М8-6Н.6.019 ГОСТ 5915-70 2 Nut
8 С8.01.019 ГОСТ 6958-78 4 Washer
9 8Т ОСТ 37.001.115-75 2 Washer
11 Р78-0532 1 Bracket
12 "Sico Rubena"270 003 151-А ТУ TPD 1 Silicon branch pipe
282 (allowed substitution for pos. 2 or 16)
13 FPG 09-0219 1 Air filter (Donaldson)
14 “NORMA” TORRO 90-110/9-C6W 2 Clamp
15 “NORMA” TORRO 70-90/9-C6W 2 Clamp
16 PR001-60-80-PES 1 Heat-resistant branch pipe
(allowed substitution for pos. 2 or 12)

- 27 -
Fig.12.1. Silencer

- 28 -
Group 12. Exhaust system
Subgroup 1205. Silencer

(For Belarus-900/900.2/900.3/950/950.2/950.3/952/952.2/952.3)
Fig. No. Pos.
Designation Q-ty Description
No.
12.1 245-1205015 1 Silencer (1-5)
245-1205130 1 Clamp (2-5)
1 245-1205020 1 Silencer
2 245-1205131 1 Cramp
3 245-1205132 1 Clamp
4 С 10.01.019 ГОСТ 11371-78 2 Washer
5 М10-6Н.6.019 ГОСТ 5915-70 2 Nut

(For Belarus-920/920.2/920.3)
Fig. No. Pos.
Designation Q-ty Description
No.
12.1 60-1205015 1 Silencer (1-5)
60-1205105 1 Clamp (2-5)
1 60-1205015 1 Silencer
2 60-1205101 1 Cramp
3 60-1205103 1 Clamp
4 С 10.01.019 ГОСТ 11371-78 2 Washer
5 80-1205136 2 Nut

- 29 -
Fig.13.1. Cooling unit (for Belarus-900/900.2/920./920.2/950./950.2/952/952.2)
- 30 -
Group 13. Cooling system
1301. Cooling unit
(For Belarus-900/900.2/920./920.2/950./950.2/952/952.2)
Fig. No. Pos.
Designation Q-ty Description
No.
13.1 90-1301009 1 Cooling unit
3 900-1405120 1 Oil pipeline
5 70-1309080 1 Fan cover
6 80-1310020* 1 Bracket
8 70-1310010-А* 1 Shutter
9 70-1405110 1 Oil pipeline
10 70-1405230 1 Filter
11 ХС-21 or 8 Clamp
“NORMA” TORRO 16-25/9-C6W
12 ХС-46 or 4 Clamp
“NORMA” TORRO 32-50/9-C6W
15 90-1301233 1 Seal
16 1321-1311008 1 Tube
17 90-1302003-А 1 Brace
18 922-1311001 1 Bracket
19 90-1302004 2 Tube
20 85-1302071 2 Shock-absorber
21 70-1303001 1 Hose
22 50-1303062-Б2 1 Hose
23 80-1302012-А 1 Bracket
24 80-1311002 1 Clamp
25 80-1311003 1 Bush
26 80-1311004 1 Plate
27 80-1311006 1 Disk
28 80В-1310007* 1 Cable shell
29 80П-1311010 1 Expansion tank
30 80П-1311011 1 Plug
31 80-1405089 1 Male pipe adapter
32 1520-1302072 1 Bracket
33 70Л-1024216* 1 Clamp
34 70-1115012-03 1 Buckle
35 70-1310016* 1 Slat
36 70-1310121-А* 1 Control cord
37 70-1310441* 2 Catch
38 70-1405013 4 Hose
40 70-3506027 1 Bush
41 40-4607032 1 Clamping bolt
42 40-4607038-А 3 Washer
43 54.06.413 1 Spring
44 50-4605069 1 Bush
46 М6-6gх40.88.35.019 ГОСТ 7795-70 1 Bolt
48 М8-6gх30.88.35.019 ГОСТ 7796-70 4 Bolt
49 М8-6gх16.88.35.019 ГОСТ 7796-70 8 (1*) Bolt
50 М6-6gх16.88.35.019 ГОСТ 7798-70 1 Bolt
51 В.М4-6gх8.58.019 ГОСТ 17473-80* 2 Screw
52 В.М6-6gх12.58.019 ГОСТ 17473-80* 1 Screw
53 М6-6Н.6.019 ГОСТ 5915-70* 3 Nut
54 М8-6Н.6.019 ГОСТ 5915-70 4 Nut
55 С 8.01.019 ГОСТ 6958-78 4 Washer
56 С 8.01.019 ГОСТ 11371-78 4 Washer
57 3,2х18.019 ГОСТ 397-79 4 Cotter pin
58 6Т ОСТ 37.001.115-75 2 (1*) Washer
59 8Т ОСТ 37.001.115-75 12 (1*) Washer
60 КГ 1/4". А12.019 ТУ 23.1.506-91 1 Plug
* optionally (jointly with pos.8)
ТУ – Technical Specifications (translator’s note)

- 31 -
Fig.13.1. Cooling unit (for Belarus-900/900.2/920./920.2/950./950.2/952/952.2)
- 32 -
Group 13. Cooling system
1301. Cooling unit
(For Belarus-900/900.2/920./920.2/950./950.2/952/952.2)
Fig. No. Pos.
Designation Q-ty Description
No.
13.1 67 70У.13.01.015** or 1 Water radiator
90-1301015** or
161.1301010-15**
70У.13.01.010-01
70У.13.01.010 or
90-1301010 or
161.1301010
69 245-1405010А 1 Oil radiator
73 “NORMA” TORRO 12-20/9-C6W 2 Clamp
** for tropics

- 33 -
Fig.13.2. Cooling unit (for Д-245.5S2/Д-245.43S2)

- 34 -
Group 13. Cooling system
Subgroup 1301. Cooling unit (for Д-245.5S2/Д-245.43S2)
Fig. No. Pos.
Designation Q-ty Description
No.
13.2 1 85-1309080 1 Fan cover
2 1025.13.01.010Б 1 Water radiator
3 1025.3-1301340 1 Seal
4 1 Plug А21.01.270-1
5 2 Clamp “NORMA” TORRO 16-25/9-C6W
6 400 mm Hose pipe 14х23-1,6 ГОСТ 10362-76
7 4 Clamp “NORMA” TORRO 32-50/9-C6W
8 85-1303010 1 Hose
9 1520-1302072 1 Bracket
10 85-1302071 2 Shock-absorber
11 С 8.01.019 ГОСТ 6958-78 4 Washer
12 1025-1302003-Б 1 Brace
13 3,2х18.019 ГОСТ 397-79 4 Cotter pin
14 80-1302011 1 Bracket
15 80-1311002 1 Clamp
16 80П-1311010-А 1 Expansion tank
17 80П-1311011 1 Plug
18 М6-6Н.6.019 ГОСТ 5915-70 2 Nut
19 6Т ОСТ 37.001.115-75 2 Washer
20 М6-6gх16.88.35.019 ГОСТ 7798-70 1 Bolt
21 923-1311001 1 Bracket
22 80-1311004 1 Plate
23 М6-6gх40.88.35.019 ГОСТ 7795-70 1 Bolt
24 80-1311003 1 Bush
25 54.06.413 1 Spring
26 80-1311006 1 Disk
27 М8-6gх16.88.35.019 ГОСТ 7796-70 13 Bolt
28 8Т ОСТ 37.001.115-75 13 Washer
29 М8-6Н.6.019 ГОСТ 5915-70 12 Nut
30 85-1303001 1 Hose
31 1 Plug – КГ 1/4".А12.019
32 1025.3-1301230 1 Seal

- 35 -
Fig.13.3. Fan guard

- 36 -
Group 13. Cooling system
Subgroup 1309. Fan guard
Fig. No. Pos.
Designation Q-ty Description
No.
13.3 1025-1309300 1 Fan guard
1 1025-1309070 1 Bracket
2 1025-1309075 2 Bracket
3 1025-1309075-01 1 Bracket
4 1025-1309075-02 1 Bracket
5 1025-1309080 1 Bracket
6 1025-1309080-01 1 Bracket
7 1025-1309085 1 Bracket
8 1025-1309090 1 Bracket
10 1025-1309041 1 Left guard
11 1025-1309051-Б 1 Right guard
13 М8-6gх20.88.35.019 ГОСТ 7796-70 1 Bolt
14 М6-6gх14.88.35.019 ГОСТ 7798-70 9 Bolt

- 37 -
Fig.13.4. Shutter

- 38 -
Group 13. Cooling system
Subgroup 1310. Shutter
Fig. No. Pos.
Designation Q-ty Description
No.
13.4 70-1310010-A 1 Shutter (1-29)
1 70-1310016 1 Slat
2 A09.01.001 1 Shutter
3 A09.01.015 1 Drum
4 С 6.01.019 ГОСТ 11371-78 1 Washer
5 2х12.019 ГОСТ 397-79 2 Cotter pin
6 A09.01.005 1 Spring
7 70-1310441 2 Catch
8 В.М4-6gх8.58.019 ГОСТ 17473-80 2 Screw
9 80-1310020 1 Bracket
10 80B-1310007 1 Shell
11 70-4803027 1 Bracket
12 70-1310121-A 1 Control cord
13 М6-6Н.6.019 ГОСТ 5915-70 2 Nut
14 6Т ОСТ 37.001.115-75 2 Washer
15 70-1310411 1 Cramp
16 A09.01.023 1 Spring
17 70-1310450 1 Drum
18 70-1310412 1 Slat
19 70-1310130-A 1 Handle
20 С 5.01.019 ГОСТ 11371-78 1 Washer
21 5Т ОСТ 37.001.115-75 1 Washer
22 В.М5-6gх12.58.019 ГОСТ 17473-80 1 Screw
23 В.М6-6gх20.58.019 ГОСТ 17473-80 2 Screw
24 80-4803026 1 Bracket
25 70-4803022 1 Bush
26 70Л-1024216 1 Clamp
27 70-1310013-A 1 Slat
28 A09.01.004 1 Rod
29 A09.01.011 1 Tip

- 39 -
Fig.13.5. Charge air cooler (Д-245.5S2/Д-245.43S2)

- 40 -
Group 13. Cooling system
Subgroup 1317. Charge air cooler
(Д-245.5S2/Д-245.43S2)
Fig. No. Pos.
Designation Q-ty Description
No.
13.5 1 1025-1317100 1 Charge air cooler
2 “NORMA” GBS 71/25 W2 8 Clamp
3 2 Silicon branch pipe 60х80, blue
4 1025П-1317600 1 Air duct
5 1025-1317735 2 Bracket
6 1 Silicon branch pipe 60х80, red
7 1025-1317610 1 Air duct
8 “NORMA” GBS 61/20 W2 2 Clamp
9 1 Silicon branch pipe 50х100, red
10 1025П-1317620 1 Air duct
11 М8-6Н.6.019 ГОСТ 5915-70 2 Nut
12 С 8.01.019 ГОСТ 6958-78 4 Washer
13 8Т ОСТ 37.001.115-75 4 Washer
14 М8-6gх16.88.35.019 ГОСТ 7796-70 4 Bolt
15 КГ 1/4".А12.019 ТУ 23.1.506-91 2 Plug
16 1 Silicon branch pipe 63х80, blue

- 41 -
Fig.16.1. Clutch assembly 240-1005009-03
(without pos.27а: 240-1005009)

- 42 -
Group 16. Clutch
Subgroup 1601. Clutch assembly
Q-ty
900 900.3/920.3
920 950/952
920.2 952.2/952.3

240-1005009-06*
240-1005009-03
Pos.
Fig. No Designation Description

240-1005009
No.

16.1, 80-1601090-А - 1 - Clutch plate (5-15, 18-31)


16.1а 80-1601090 1 - 1 Clutch plate (5-15, 18-27, 28-31)
85-1601120-Б 1 1 1 Backing plate (12-15, 23)
1 85-1601130-01 or 1 1 - Driven plate (includes 2, 3)
85-1601130-02
1а 80-1601130-А - - 1 Driven plate (includes 2а, 3а)
2 70-1601138-01 or 2 2 - Friction lining (included in 1)
70-1601138-02
2а 566528 - - 12 Segment GBV 156400 (7650861d) (in-
cluded in 1а)
3 2-4х8.32 ГОСТ 12642-80 24 24 - Rivet (included in 1)
3а 566529 - - 12 Rivet TT2 7050914 (included in 1а)
4 70-1601074 6 6 6 Bush
5 80-1601093 1 1 1 Pressure plate
6 3,2х18.019 ГОСТ 397-79 12 12 12 Cotter pin
7 85-1601108 12 12 12 Washer
8 85-1601096 6 6 6 Pin
9 85-1601094 3 3 3 Clutch lever
10 85-1601083 3 3 3 Spring
11 85-1601097 3 3 3 Fork
12 70-1601062 2 2 2 Washer
13 70-1601091 12 12 12 Damper
14 70-1601053 1 1 1 Bush
15 85-1601125-Б 1 1 1 Backing plate (assembled with 16 and 17)
16 70-1601051 1 1 1 Hub (included in 15)
17 8х22.01 ГОСТ 10299-80 6 6 6 Rivet (included in 15)
18 85-1601109-A 3 3 3 Adjusting nut
19 85-1601086 3 3 3 Retaining washer
20 С 8.01.019 ГОСТ 11371-78 6 6 6 Washer
21 8Т ОСТ 37.001.115-75 6 6 6 Washer
22 М8-6gх16.88.35.019 6 6 6 Bolt
ГОСТ 7796-70
23 6х30.01 ГОСТ 10299-80 3 3 3 Rivet
24 М12х1,25-6Н.6.019 9 9 9 Nut
ГОСТ 5915-70
25 12 ОТ ОСТ 37.001.115-75 9 9 9 Washer
26 85-1601072-Б 9 9 9 Cage
27 85-1601115 9 9 9 Spring
27a 77.55.121-1 - 6 - Spring
28 85-1601118-Б 9 9 9 Insulating washer
29 85-1601124 9 9 9 Plate
30 85-1601121 6 6 6 Washer
31 85-1601126 6 6 6 Bolt
*optionally

- 43 -
Fig.16.1a. Clutch assembly 240-1005009-06

- 44 -
Group 16. Clutch
Subgroup 1601. Clutch assembly
Q-ty
900 900.3/920.3
920 950/952
920.2 952.2/952.3

240-1005009-06*
240-1005009-03
Pos.
Fig. No Designation Description

240-1005009
No.

16.1, 80-1601090-А - 1 - Clutch plate (5-15, 18-31)


16.1а 80-1601090 1 - 1 Clutch plate (5-15, 18-27, 28-31)
85-1601120-Б 1 1 1 Backing plate (12-15, 23)
1 85-1601130-01 or 1 1 - Driven plate (includes 2, 3)
85-1601130-02
1а 80-1601130-А - - 1 Driven plate (includes 2а, 3а)
2 70-1601138-01 or 2 2 - Friction lining (included in 1)
70-1601138-02
2а 566528 - - 12 Segment GBV 156400 (7650861d) (in-
cluded in 1а)
3 2-4х8.32 ГОСТ 12642-80 24 24 - Rivet (included in 1)
3а 566529 - - 12 Rivet TT2 7050914 (included in 1а)
4 70-1601074 6 6 6 Bush
5 80-1601093 1 1 1 Pressure plate
6 3,2х18.019 ГОСТ 397-79 12 12 12 Cotter pin
7 85-1601108 12 12 12 Washer
8 85-1601096 6 6 6 Pin
9 85-1601094 3 3 3 Clutch lever
10 85-1601083 3 3 3 Spring
11 85-1601097 3 3 3 Fork
12 70-1601062 2 2 2 Washer
13 70-1601091 12 12 12 Damper
14 70-1601053 1 1 1 Bush
15 85-1601125-Б 1 1 1 Backing plate (assembled with 16 and 17)
16 70-1601051 1 1 1 Hub (included in 15)
17 8х22.01 ГОСТ 10299-80 6 6 6 Rivet (included in 15)
18 85-1601109-A 3 3 3 Adjusting nut
19 85-1601086 3 3 3 Retaining washer
20 С 8.01.019 ГОСТ 11371-78 6 6 6 Washer
21 8Т ОСТ 37.001.115-75 6 6 6 Washer
22 М8-6gх16.88.35.019 6 6 6 Bolt
ГОСТ 7796-70
23 6х30.01 ГОСТ 10299-80 3 3 3 Rivet
24 М12х1,25-6Н.6.019 9 9 9 Nut
ГОСТ 5915-70
25 12 ОТ ОСТ 37.001.115-75 9 9 9 Washer
26 85-1601072-Б 9 9 9 Cage
27 85-1601115 9 9 9 Spring
27a 77.55.121-1 - 6 - Spring
28 85-1601118-Б 9 9 9 Insulating washer
29 85-1601124 9 9 9 Plate
30 85-1601121 6 6 6 Washer
31 85-1601126 6 6 6 Bolt
*optionally

- 45 -
Version code
stamping place

Fig.16.2. Clutch casing


- 46 -
Group 16. Clutch
Subgroup 1601. Clutch casing

Q-ty
Fig. Pos. 900 900.3 950/
Designation 920/ 920.3 952 Description Remarks
No. No.
920.2 952.2/
952.3
16.2 74-1600010 1 - - Clutch casing Version
(neng=2200rpm, synchronized splitter) code 10
Fig.16.2: 1, 3-7, 10-25; Fig.16.3: 3-8;
Fig.16.4: 1-32; Fig.16.5: 1-8;
Fig.17.2: 1-7, 8, 9.
74-1600010-02 - 1* 1 Clutch casing Version
(neng=1800rpm, synchronized splitter) code 12
Fig.16.2: 1, 3-7, 10-25; Fig.16.3: 3-8;
Fig.16.4: 1-5, 6а, 7-10, 11а, 12-26, 27а, 28а,
29а,30а, 31а, 32; Fig.16.5а: 1а, 2а, 3-8;
Fig.17.2: 1-,7, 8, 9.
74-1600010-03 - 1 1* Clutch casing Version
(neng=1800rpm, synchronized multiplier) code 13
Fig.16.2: 1, 3-7, 10-25; Fig.16.3: 3-8;
Fig.16.4: 1-5, 6а, 7-10, 11а, 12-26, 27а, 28а,
29а,30а, 31а, 32; Fig.16.5а: 1а, 2а, 3-8.
Fig.17.2: 1-7, 8а, 9.
70-1600010 1* - - Clutch casing Version
(neng=2200rpm, mechanical splitter) code -
Fig.16.2: 1, 3-7, 10-25; Fig.16.3: 3-8;
Fig.16.4: 1-32; Fig.16.5: 1-8;
Fig.17.1: 1-7, 8, 9, 10.
50-1600010-06 - 1* 1* Clutch casing Version
(neng=1800rpm, mechanical splitter) code 06
Fig.16.2: 1, 3-7, 10-25; Fig.16.3: 3-8;
Fig.16.4: 1-5, 6а, 7-10, 11а, 12-26, 27а, 28а,
29а,30а, 31а, 32; Fig.16.5а: 1а, 2а, 3-8;
Fig.17.1: 1-7, 8, 9, 10.
50-1600010-08 - 1* 1* Clutch casing Version
(neng=1800rpm, mechanical multiplier) code 08
Fig.16.2: 1, 3-7, 10-25; Fig.16.3: 3-8;
Fig.16.4: 1-5, 6а, 7-10, 11а, 12-26, 27а, 28а,
29а,30а, 31а, 32; Fig.16.5а: 1а, 2а, 3-8;
Fig.17.1: 1-7, 8а, 9, 10.
Р70-1600010 1* - - Clutch casing Version
(neng=2200rpm, reverse gear) code 20
Fig.16.2: 1, 3-7, 10-25; Fig.16.3: 3-8;
Fig.16.4: 1-5, 6а, 7-10, 11а, 12-26, 27а, 28а,
29а,30а, 31а, 32; Fig.16.5: 1-8;
Fig.17.4: 1-10, 17-19, 25-27.
Р70-1600010-02 - 1* 1* Clutch casing Version
(neng=1800rpm, reverse gear) code 22
Fig.16.2: 1, 3-7, 10-25; Fig.16.3: 3-8;
Fig.16.4: 1-5, 6а, 7-10, 11а, 12-26, 27а, 28а,
29а,30а, 31а, 32; Fig.16.5а: 1а, 2а, 3-8;
Fig.17.4: 1-10, 17-19, 25-27.
* Optionally

- 47 -
Version code
stamping place

Fig.16.2. Clutch casing


- 48 -
Group 16. Clutch
Subgroup 1601. Clutch casing

Q-ty
Fig. Pos.
Designation 900 900.3 950/952 Description Remarks
No. No.
920/920.2 920.3 952.2/952.3
16.2 1 70-1601015 1 1 1 Clutch casing
70-1601015-03 1** 1** 1** Clutch casing
70-1601015-04 1*** 1*** 1*** Clutch casing
2 Д01-015 2 2 2 Setting pin
3 ШЦК 10х25 2 2 2 Pin
4 50-1601345 1 1 1 Gasket
5 70-1601344 1 1 1 Cover
6 8Т ОСТ 37.001.115-75 11 11 11 Washer
7 М8-6gх20.88.35.019 7 7 7 Bolt
ГОСТ 7796-70
8 16 ОТ 10 10 10 Washer
ОСТ 37.001.115-75
9 М16-6gх50.88.35.019 10 10 10 Bolt
ГОСТ 7796-70
10 ПК КГ 1¼" 1 1 1 Plug
11 80-4608024 1 1 1 Ring
12 36-1601016 1 1 1 Dust deflector body
13 50-1601215 1 1 1 Shaft
14 СШ-611 1 1 1 Key 6х11
15 70-1601140 1 1 1 Roller
16 020-025-30-1-4 2 2 2 Ring
ГОСТ 18829-73/
ГОСТ 9833-73
17 80-1601099 1 1 1 Plate
18 С 10.01.019 1 1 1 Washer
ГОСТ 11371-78
19 10 ОТ 9 9 9 Washer
ОСТ 37.001.115-75
20 М10-6gх20.88.35.019 1 1 1 Bolt
ГОСТ 7796-70
21 М10-6gх25.88.35.019 8 8 8 Bolt
ГОСТ 7796-70
22 50-1601315 1 1 1 Cover
23 70-1601314 2 2 2 Gasket
24 М8-6gх16.88.35.019 4 4 4 Bolt
ГОСТ 7796-70
25 50-1601341 1 1 1 Cover
26 50-1601352 2 2 2 Setting pin
27 50-1601022 1 1 1 Choke
**Optionally (except for versions with reverse gear)
***For versions with reverse gear

- 49 -
Fig.16.3. Clutch casing. Shifter.
- 50 -
Group 16. Clutch
Subgroup 1601. Clutch casing. Shifter.

Pos.
Fig. No Designation Q-ty Description
No.
16.3 1 986714К1С23 1 Bearing
2 50-1601185-А 1 Shifter
3 М10-6gх25.88.35.019 ГОСТ 7796-70 3 Bolt
4 10 ОТ ОСТ 37.001.115-75 5 Washer
5 60210 АУШ1 ГОСТ 7242-81 1 Bearing
6 240-1002055 1 Cuff (included in 8)
7 110-115-30-1-4 Ring
1
ГОСТ 18829-73/9833-73
8 50-1601172-А 1 Shifter bracket (assembled with 6)
9 1.1.Ц9.хр ГОСТ 19853-74 1 Greaser
10 50-1601218 2 Key
11 50-1601203 2 Fork
12 М10-6gх30.88.35.019 ГОСТ 7796-70 2 Bolt

- 51 -
Fig.16.4. Clutch casing (PTO drive, mounted attachment hydraulic system pump drive)

- 52 -
Group 16. Clutch
Subgroup 1601. Clutch casing
(PTO drive, mounted attachment hydraulic system pump drive)

Quantity
Pos. 900 900.3
Fig. No Designation 920/920.2 920.3 Description
No.
950/952
952.2/952.3
16.4 70-1601240-Б 1 - PTO gear block (5-11)
50-1601240 - 1 PTO gear block (5,6а,7-10,11а)
70-1601330 1 - Gear (27-30)
50-1601330-А - 1 Gear (27а, 28а, 29а, 30а)
1 942/40 ГОСТ 4060-78 1 1 Bearing
2 70-1601021-Б 1 1 Driven shaft
3 70-1601076 1 1 Ring
4 70-1601081 1 1 Clutch
5 2С50 ГОСТ 13940-86 1 1 Ring
6 70-1601086-Б 1 - PTO drive gear
6а 50-1601086 - 1 PTO drive gear
7 210 АУШ1 ГОСТ 8338-75 2 2 Bearing
8 70-1601083 1 1 Spacer washer
9 2С90 ГОСТ 13941-86 1 1 Ring
10 943/30 ГОСТ 4060-78 2 2 Bearing
11 70-1601088-Б 1 - PTO drive gear
11а 50-1601088-Б - 1 PTO drive gear
12 70-1601082 1 1 Washer
13 6-50306К 1 1 Bearing
GOST8338-75/GOST2893-82
14 72 ГОСТ 2893-82 1 1 Ring
15 М8-6gх16.88.35.019 4 4 Bolt
ГОСТ 7796-70
16 8Т ОСТ 37.001.115-75 4 4 Washer
17 50-1601089 1 1 Cover
18 50-1601091 1 1 Gasket
19 М12-6gх35.88.35.019 1 1 Bolt
ГОСТ 7796-70
20 12 ОТ ОСТ 37.001.115-75 1 1 Washer
21 50-1601038 1 1 Washer
22 М10-6gх30.88.35.019 1 1 Bolt
ГОСТ 7796-70
23 10 ОТ ОСТ 37.001.115-75 1 1 Washer
24 С 10х6.01.019 ГОСТ 6958-78 1 1 Washer
25 025-030-30-1-4 1 1 Ring
ГОСТ 18829-73/9833-73
26 50-1601336 1 1 Bush
27 305А ГОСТ 8338-75 2 - Bearing
27а 304А ГОСТ 8338-75 - 2 Bearing
28 70-1601333 1 - Ring
28а 50-1601333 - 1 Spacer washer
29 2С62 ГОСТ 13941-86 1 - Ring
29а 50-1701464 - 2 Spring ring
30 70-1601331 1 - Gear
30а 50-1601331-А - 1 Intermediate gear
31 70-1601335 1 - Shaft
31а 50-1601335 - 1 Gear shaft
32 В.М12-6gх25.14Н.019 1 1 Screw
ГОСТ 1478-93

- 53 -
Fig.16.5. Clutch casing. PTO drive. (neng=2200 rpm)

Fig.16.5a. Clutch casing. PTO drive. (neng=1800 rpm)

- 54 -
Group 16. Clutch
Subgroup 1601. Clutch casing. PTO drive.

Q-ty
Pos. 900.3
Fig. No Designation 900 Description
No. 920.3
920/920.2
950/952
952.2/952.3
16.5, 1 70-1601026 1 - PTO drive shaft
16.5а 1а 50-1601023 - 1 Shaft
1б 50-1601024 - 1 Gear
2 50-1601321 1 1 Seal ring
3 210 АУШ1 GOST8338-75 1 1 Bearing
4 50-1601027 1 1 Thrust washer
5 307А ГОСТ 8338-75 1 1 Bearing
6 70-1601028 1 1 Bracket
7 10 ОТ ОСТ 37.001.115-75 3 3 Washer
8 М10-6gх25.88.35.019 3 3 Bolt
ГОСТ 7796-70

- 55 -
Fig.16.6. Clutch control

- 56 -
Group 16. Clutch
Subgroup 1602. Clutch control

Fig. No. Pos.


Designation Q-ty Description
No.
16.6 80-1602010-Б 1 Clutch control (1-19)
85-1602110-Б 1 Rod (5.7,8)
1 М12-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
2 12 ОТ ОСТ 37.001.115-75 2 Washer
3 80-1601219-Б 1 Lever
4 12х32 ОСТ 37.001.163-75 3 Pin
5 50-3502203 2 Fork
6 3,2х18.019 ГОСТ 397-79 3 Cotter pin
7 М12х1,25-6Н.6.019 ГОСТ 5915-70 2 Nut
8 85-1602112-Б 1 Rod
9 М12-6gх30.88.35.019 ГОСТ 7796-70 1 Bolt
10 80-3503158-А 1 Seal
11 80-1602040-Б 1 Pad rod
12 А13.33.002 1 Boot
13 80-1602020-Б1 1 Pedal
14 50-1602027 1 Stop
15 50-1602032 1 Spring
16 50-1602029 1 Stop
17 80-1602033 1 Stop bolt
18 М16-6Н.6.019 ГОСТ 5915-70 1 Nut
19 80-1602075-Б 1 Bracket

- 57 -
Fig.17.1. Mechanical splitter/ mechanical multiplier

- 58 -
Group 17. Gearbox
Subgroup 1721. Mechanical splitter/
mechanical multiplier
Q-ty

Multiplier*
Pos.

Splitter*
Fig. No Designation Description
No.

17.1 70-1721020 1 - Clutch shaft with cover (1-4,7,8-10)


50-1721020 - 1 Clutch shaft with cover (1-4,7,8а-10)
70-1721040 1 - Gear (13-16)
50-1721040 - 1 Gear (13-16а)
1 2С55 ГОСТ 13940-86 2 2 Ring
2 2С100 ГОСТ 13941-86 1 1 Ring
3 211 АУШ1 GOST8338-75 1 1 Bearing
4 70-1721022 1 1 Bearing cap
5 10 ОТ ОСТ 37.001.115-75 4 4 Washer
6 М10-6gх25.88.35.019 ГОСТ 7796-70 4 4 Bolt
7 70-1721023 1 1 Washer
8 70-1721031 1 - Gear
8а 50-1721031 - 1 Gear
9 4х34,8А3 ГОСТ 6870-81 47 47 Roller
10 70-1721113-А 1 1 Clutch shaft
11 70-1721045 1 1 Gear clutch
12 70-1721025 1 - Gear
12а 50-1721025 - 1 Gear
13 212 АУШ1 ГОСТ 8338-75 2 2 Bearing
14 70-1721318 2 2 Washer
15 2С110 ГОСТ 13941-86 2 2 Ring
16 70-1721041 1 - Gear
16а 50-1721041 - 1 Gear
* see Table to the figure 16.2

- 59 -
Fig.17.2. Synchronized splitter/ synchronized multiplier

- 60 -
Group 17. Gearbox
Subgroup 1721. Synchronized splitter/
synchronized multiplier
Q-ty

Multiplier*
Pos.

Splitter*
Fig. No Designation Description
No.

17.2 74-1721020 1 - Shaft assembly (1-3,5,8,9)


74-1721020-01 - 1 Shaft assembly (1-3,5,8а,9)
70-1721040 1 - Gear (16-19)
50-1721040 - 1 Gear (16-19а)
1 2С55 ГОСТ 13940-86 1 1 Ring
2 2С110 ГОСТ 13941-86 1 1 Ring
3 211 АУШ1 ГОСТ 8338-75 1 1 Bearing
4 74-1721023 1..4 1..4 Gasket 0.5 mm
74-1721023-01 1..4 1..4 Gasket 0.5 mm
5 70-1721022 1 1 Bearing cap
6 10 ОТ ОСТ 37.001.115-75 4 4 Washer
7 М10-6gх25.88.35.019 ГОСТ 7796-70 4 4 Bolt
8 74-1721090 1 - Gear
8а 74-1721090-01 - 1 Gear
9 74-1721113 1 1 Shaft
10 74-1701060-А 1 1 Synchronizer
11 С40 ГОСТ 13940-86 1 1 Ring
12 74-1721028 1 1 Bush
13 74-1721080 1 - Gear
13а 74-1721080-01 - 1 Gear
14 3КК 50х57х36Е ТУ РБ 00234873.003-99 1 1 Bearing
15 74-1701026 1 1 Ring
16 212 АУШ1 ГОСТ 8338-75 2 2 Bearing
17 70-1721318 2 2 Washer
18 2С110 ГОСТ 13941-86 2 2 Ring
19 70-1721041 1 - Gear
19а 50-1721041 - 1 Gear
* see Table to the figure 16.2

ТУ РБ – Technical Specifications of the Republic of Belarus (translator’s note)

- 61 -
Fig.17.3. Mechanical* (synchronized**) splitter/multiplier control

- 62 -
Group 17. Clutch
Subgroup 1723. Splitter/multiplier control

Pos.
Fig. No Designation Q-ty Description
No.
17.3 80-1723010-Б 1* Splitter control
(1, 2, 3, 5, 6, 21, 23-26)
74-1723030 1** Splitter cover
(2а, 3а, 5, 6, 22, 23)
80-1723065 1 Lever (7, 12, 13, 18-20)
1 80-1721021 1 Fork
1а 74-1723020-Б 1 Fork
2 70-1723020 1 Shaft with lever
2а 70-1723140 1 Lever
3 50-1702148-А 1 Spring
3а 020-025-30-1-4 1 Ring
4 50-1601347 1 Gasket
5 70-1723012 1 Pin
6 70-1723024 1 Rod
7 70-1723063 1 Wedge
8 80-6700370 1 Casing
9 80-6702291 1 Liner
10 70-3723024 2 Bush
11 70-4605308-Б 1 Bush
12 80-1723060 1 Lever
13 А61-01-014 1 Handle
14 М6-6gх20.88.35.019 ГОСТ 7798-70 3 Bolt
15 6Т ОСТ 37.001.115-75 5 Washer
16 М6-6gх14.88.35.019 ГОСТ 7798-70 2 Bolt
17 С 6.01.019 ГОСТ 11371-78 2 Washer
18 С 10.01.019 ГОСТ 11371-78 1 Washer
19 10 ОТ ОСТ 37.001.115-75 7 Washer
20 М10-6Н.6.019 ГОСТ 5915-70 1 Nut
21 70-1723032 1 Bush
22 М10-6gх30.88.35.019 ГОСТ 7796-70 6 Bolt
23 70-1723015 1 Cover
24 025-030-30-2-2 ГОСТ 18829-73/9833-73 1 Ring
25 10,0-60 ГОСТ 3722-81 1 Ball
26 С16 ГОСТ 13940-86 1 Ring
* Mechanical splitter/multiplicator control
** Synchronized splitter/multiplicator control

- 63 -
Group 17. Gearbox

Table – Equipment of the tractor models


Gear- Availability for the BELARUS tractor model
Gearbox des- box Figure Gearbox version de-
ignation mark- 900 900.3 920 920.2 920.3 950 952 952.2 952.3 numbers scription
ing
17.6,17.8, - synchronized gearbox;
17.9, - synchronized splitter;
17.10, - without FDA drive;
1021-1700010 1000
17.11, - with HSR drive;
17.13, - right two-lever control
17.15
17.6,17.8, - synchronized gearbox;
17.9, - synchronized splitter;
1021-1700010- 17.10, - with FDA drive;
1001
01 17.11, - with HSR drive;
17.13, - right two-lever control
17.15
17.6,17.8, - synchronized gearbox;
17.9, - synchronized multipli-
1021-1700010- 17.10, er;
1004
04 17.11, - without FDA drive;
17.13, - with HSR drive;
17.15 - right two-lever control
17.6,17.8, - synchronized gearbox;
17.9, - synchronized multipli-
1021-1700010- 17.10, er;
1005
05 17.11, - with FDA drive;
17.13, - with HSR drive;
17.15 - right two-lever control
17.4,17.5, - synchronized gearbox;
17.8,17.9, - synchronized reverse;
1021-1700010-
1007 17.10, - with FDA drive;
07
17.11, - with HSR drive;
17.15 - right two-lever control
17.6,17.7, - mechanical gearbox;
17.10, -mechanical splitter;
17.11, - without FDA drive;
70-1700010-Б1 70600
17.12, -with HSR drive;
17.14 - right single-lever con-
trol
17.6,17.7, - mechanical gearbox;
17.10, -mechanical multiplier;
70-1700010-Б1- 17.11, - without FDA drive;
70601
01 17.12, - with HSR drive;
17.14 - right single-lever con-
trol

- 64 -
Group 17. Gearbox

Continuation of the Table – Equipment of the tractor models


Gear- Availability for the BELARUS tractor model
Gearbox des- box Figure Gearbox version de-
ignation mark- 900 900.3 920 920.2 920.3 950 952 952.2 952.3 numbers scription
ing
17.6,17.7, - mechanical gearbox;
17.10, - mechanical splitter;
17.11, - with FDA drive;
72-1700010-Б1 72600
17.12, - with HSR drive;
17.14 - right single-lever con-
trol
17.6,17.7, - mechanical gearbox;
17.10, -mechanical multiplier;
72-1700010-Б1- 17.11, - with FDA drive;
72601
01 17.12, - with HSR drive;
17.14 - right single-lever con-
trol
17.4,17.5, - mechanical gearbox;
17.6,17.7, - synchronized reverse;
72-1700010-Б1- 17.10, - with FDA drive;
72603
03 17.11, - with HSR drive;
17.12, - right single-lever con-
17.14 trol
17.6,17.7, - mechanical gearbox;
17.10, - mechanical splitter;
72-1700010-Б1- 17.11, - with FDA drive;
72607
07 17.12, - without HSR drive;
17.14 - right single-lever con-
trol
17.6,17.7, - mechanical gearbox;
17.10, - synchronized splitter;
72-1700010-Б1- 17.11, - with FDA drive;
72608
08 17.12, - with HSR drive;
17.14 - right single-lever con-
trol
17.6,17.8, - synchronized gearbox;
17.9, - synchronized splitter;
17.10, - without FDA drive;
74-1700010 7400
17.11, - with HSR drive;
17.13, - right single-lever con-
17.14 trol

- 65 -
Group 17. Gearbox

Continuation of the Table – Equipment of the tractor models


Gear- Availability for the BELARUS tractor model
Gearbox des- box Figure Gearbox version de-
ignation mark- 900 900.3 920 920.2 920.3 950 952 952.2 952.3 numbers scription
ing
17.6,17.8, - synchronized gearbox;
17.9, - synchronized splitter;
17.10, - with FDA drive;
74-1700010-01 7401
17.11, - with HSR drive;
17.13, - right single-lever con-
17.14 trol
17.6,17.7, - synchronized gearbox;
17.9, - synchronized splitter;
17.10, - with the top gear lock;
74-1700010-03 7403 17.11, - with FDA drive;
17.13, - with HSR drive;
17.14 - right single-lever con-
trol
17.6,17.8, - synchronized gearbox;
17.9, - synchronized multipli-
17.10, er;
74-1700010-04 7404 17.11, - without FDA drive;
17.13, - with HSR drive;
17.14 - right single-lever con-
trol
17.6,17.8, - synchronized gearbox;
17.9, - synchronized multipli-
17.10, er;
74-1700010-05 7405 17.11, - with FDA drive;
17.13, - with HSR drive;
17.14 - right single-lever con-
trol
17.4,17.5, - synchronized gearbox;
17.6,17.8, - synchronized reverse;
17.9, - without FDA drive;
74-1700010-06 7406 17.10, - with HSR drive;
17.11, - right single-lever con-
17.13, trol
17.14
17.4,17.5, - synchronized gearbox;
17.6,17.8, - synchronized reverse;
17.9, - with FDA drive;
74-1700010-07 7407 17.10, - with HSR drive;
17.11, - right single-lever con-
17.13, trol
17.14
17.6,17.7, - mechanical gearbox;
17.10, -mechanical multiplier;
82-1700010-01 8201 17.11, - with FDA drive;
17.12, -with HSR drive;
17.15 - right two-lever control

- 66 -
Group 17. Gearbox

Continuation of the Table – Equipment of the tractor models


Gear- Availability for the BELARUS tractor model
Gearbox des- box Figure Gearbox version de-
ignation mark- 900 900.3 920 920.2 920.3 950 952 952.2 952.3 numbers scription
ing

Note:
The availability of equipment of a BELARUS tractor with this gearbox (GB) for each model of the series is
marked with shaded highlighting.

The variant of equipment of a tractor with a particular gearbox is determined defined by the GB version
marking made on a pad in the left top corner of the GB casing window as seen in the direction of the tractor motion by the
impact method.
(see the figure)

Figure: GB version marking

- 67 -
Fig.17.4. Synchronized reverse gear

- 68 -
Group 17. Gearbox
Subgroup 1721. Synchronized reverse gear

74-1700010-06/-07
72-1700010-Б1-03

1021-1700010-07
Fig. Pos.
Designation Description
No. No.

17.4 Р70-1721020 Clutch shaft (1-4, 7, 9, 10, 18, 19,


1
24-27)
50-1721040 1 Gear (20-23)
1 2С55 ГОСТ 13940-86 1 Ring
2 2С100 ГОСТ 13941-86 1 Ring
3 211АУШ1 ГОСТ 8338-75 1 Bearing
4 74-1721023 4* Gasket 0.5 mm
74-1721023-01 4* Gasket 0.2 mm
5 10 ОТ ОСТ 37.001.115-75 4 Washer
6 М10-6gх25.88.35.019 ГОСТ 7796-70 3 Bolt
7 Р70-1721022 1 Bearing cap
8 М10-6gх75.88.35.019 ГОСТ 7796-70 1 Bolt
9 Р70-1721090 1 Gear
10 74-1721113 1 Shaft
11 74-1701060-А 1 Synchronizer
12 С40 ГОСТ 13940-86 1 Ring
13 74-1721028 1 Bush
14 74-1721080-01 1 Gear
15 3КК50х57х36Е ТУ РБ 00234873.003-99 1 Bearing
16 74-1701026 1 Ring
17 70-1723012 1 Pin
18 Р70-1721023 1 Shaft
19 Р70-1721021 2 Ring
20 212АУШ1 ГОСТ 8338-75 2 Bearing
21 70-1721318 2 Washer
22 2С110 ГОСТ 13941-86 2 Ring
23 50-1721041 1 Gear
24 864906Е ТУ РБ 00234873.003-99 1 Roller bearing
25 Р70-1721024 1 Gear
26 12-12-306 1 Ring
27 52-2308094 1 Pin
* Maximum quantity. Selection

- 69 -
Fig.17.5. Synchronized reverse gear control

- 70 -
Group 17. Gearbox
Subgroup 1723. Synchronized reverse gear control

74-1700010-06/-07
72-1700010-Б1-03

1021-1700010-07
Fig.
Pos. No. Designation Description
No.

17.5 Р70-1723010 1 Cover (1-11)


Р70-1723065* 1 Lever
1 74-1723140 1 Lever
2 020-025-30-1-4 ГОСТ 18829-73/9833-73 2 Ring
3 Р70-1723015 1 Cover
4 70-1723032 2 Bush
5 70-1723012 2 Pin
6 Р70-1723030 1 Lever
7 10х28 ОСТ 37.001.163-75 2 Pin
8 Р70-1723013 1 Slat
9 3,2х18.019 ГОСТ 397-79 2 Cotter pin
10 Р70-1723020 1 Shaft
11 Р70-1723011 1 Lever axle
12 50-1601347 1 Gasket
* Consists of the control lever Р70-1723060 (not shown) and parts 7, 13, 18-20 Fig. 17.3.

- 71 -
Fig.17.6. Gearbox casing. FDA drive.

- 72 -
Group 17. Gearbox
Subgroup 1701. Gearbox casing. FDA drive.

74-1700010-01/-03/-05/-07
1021-1700010-01/-05/-07
72-1700010-Б1/-01/-03/-

74-1700010/-04/-06
70-1700010-Б1/-01

1021-1700010/-04
07/-08
Fig. Pos.
Designation Description
No. No.

17.6 52-1802095-Б - 1 - 1 Gear (11-16)


1 50-4605027 2 2 2 2 Pin
2 50-1701026 1 1 1 1 Gasket
3 50-1701025-А 1 1 - - Gearbox casing
50-1701025-А-01 - - 1 1 Gearbox casing
4 70-1701300 1 1 1 1 Plug
5 ПК КГ 3/8˝ 1 1 1 1 Plug
6 50-1701459 1 1 1 1 Gasket
7 50-1701458 1 - 1 - Cover
8 М10-6gх35.88.35.019 ГОСТ 7796-70 8 8 8 8 Bolt
9 10 ОТ ОСТ 37.001.115-75 8 8 8 8 Washer
10 М16-6gх100.88.35.019 ГОСТ 7795-70 2 2 2 2 Bolt
11 52-1802094 - 1 - 1 Shaft
12 7306А ГОСТ 27365-87 - 2 - 2 Bearing
13 52-1802097-А - 1 - 1 Ring
14 52-1802091 - 1 - 1 Gear
15 52-1802092-Б - 1 - 1 Bush
16 52-1802128 - 1 - 1 Nut
17 12 ОТ ОСТ 37.001.115-75 7 8 7 8 Washer
18 52-1802093 - 1 - 1 Screw
19 16 ОТ ОСТ 37.001.115-75 11 11 11 11 Washer
20 М16-6gх60.88.35.019 ГОСТ 7795-70 2 2 2 2 Bolt
21 М16-6gх50.88.35.019 ГОСТ 7796-70 2 2 2 2 Bolt
22 Д01-015 2 4 2 4 Setting pin
23 50-1701456-А 1 1 1 1 Gasket
24* 70-1701415-А 1 1 1 1 Oil gauge
25* 70-1701454-А2 1 1 1 1 Cover
26 М12-6gх35.88.35.019 ГОСТ 7796-70 5 5 5 5 Bolt
27 М12-6gх35.88.35.019 ГОСТ 7796-70 2 2 2 2 Bolt
011-015-25-2-4 ГОСТ 18829-73/
28 2 2 2 2 Ring
ГОСТ 9833-73
29 М16-6g х55.88.35.019 ГОСТ 7796-70 5 5 5 5 Bolt
* Not installed on the tractors equipped with speed reducer or hydraulic speed reducer

- 73 -
Fig.17.7. Input and output shafts of the mechanical gearbox

- 74 -
Group 17. Gearbox
Subgroup 1701. Input and output shafts of the mechanical gearbox

72-1700010-Б1/-01/-07/

72-1700010-Б1-03/-08
70-1700010-Б1/-01
Fig. Pos.
Designation Description
No. No.

17.7 48-1701030-А 1 - Input shaft (1, 3, 4, 5-9)


822-1701030 - 1 Input shaft (3а, 4а, 5-9)
50-1701040 1 1 Output shaft (10-13)
1 2C60 ГОСТ 13940-86 1 1 Ring
2 74-1723020-Б - 1 Fork
3 50-1701034 1 - Cage
3а 74-1701034-Б - 1 Cage
4 48-1701032-А 1 - Input shaft
4а Р70-1701032 - 1 Input shaft
5 210АУШ1 ГОСТ 8338-75 1 1 Bearing
6 2С50 ГОСТ 13940-86 1 2 Ring
7 2С90 ГОСТ 13941-86 1 1 Ring
8 50-1701048-А 1 1 Gear
9 50-1701045 1 1 Gear
10 208А ГОСТ 8338-75 1 1 Bearing
11 50-1701252 1 1 Output shaft
12 6-67512 АШ2 ГОСТ 27365-87 1 1 Bearing
13 50-1701312 1 1 Bush
14 50-1701314 1 1 Gear
15 50-1701255 1 1 Cage
16 6-7610 АШ2 ГОСТ 27365-87 1 1 Bearing
17 50-1701105-Б 1 1 Gear
18 50-1701253 1 1 Nut
19 5х45.019 ГОСТ 397-79 1 1 Cotter pin
20 50-1701254-А 1 1 Washer
М12-6g х35.88.35.019 Bolt
21 4 4
ГОСТ 7796-70
22 12 ОТ ОСТ 37.001.115-75 4 4 Washer
23 50-1701258 8* 8* Gasket 0.2 mm
24 50-1701259 2* 2* Gasket 0.5 mm
25 10 ОТ ОСТ 37.001.115-75 4 4 Washer
М10-6g х25.88.35.019
26 4 4 Bolt
ГОСТ 7796-70
27 10,0-60 ГОСТ 3722-81 - 1 Ball
28 50-1701184-А - 1 Spring
* Maximum quantity. Selection

- 75 -
Fig.17.8. Input shaft of the synchronized gearbox

- 76 -
Group 17. Gearbox
Subgroup 1701. Input shaft of the synchronized gearbox

74-1700010-03/-06/-07

1021-1700010-04/-05
74-1700010-04/-05
1021-1700010/-01

1021-1700010-07
74-1700010/-01
Fig. Pos.
Designation Description
No. No.

17.8 74-1701030 1 1 1 Input shaft (1-3, 6-8, 11-18)


74-1723020-Б1 - - 1 Fork (19-22)
1 С40 ГОСТ 13940-86 2 2 2 Ring
2 2С50 ГОСТ 13940- 2 2 2 Ring
3 210 АУШ1 ГОСТ 8338-75 1 1 1 Bearing
4 50-1702148-А 1 1 1 Spring
5 10,0-60 ГОСТ 3722-81 1 1 1 Ball
6 2С90 ГОСТ 13941-86 1 1 1 Ring
7 74-1701026 1 1 1 Washer
8 74-1701034-Б 1 1 1 Cage
9 10 ОТ ОСТ 37.001.115-75 4 4 4 Washer
10 М10-6gх25.88.35.019 ГОСТ 7796-70 4 4 4 Bolt
11 3КК50х57х36 ТУ РБ 00234873.003-99 2 2 2 Bearing
12 74-1701110 1 1 1 Gear
13 74-1701032 1 1 1 Shaft
14 74-1701060-А 2 2 2 Synchronizer
15 74-1701100 1 1 1 Gear
16 74-1701045 1 1 1 Gear
17 74-1701029 1 1 1 Ring
18 822707Д 1 1 1 Bearing
19 74-1723043-Б - - 1 Fork
20 1,6-О-С ГОСТ 3282-74 - - 1 Wire (L=200 mm)
21 220-1702061 - - 1 Bolt
22 74-1723044-Б1 - - 1 Roller
23 74-1723020-Б 1 - - Fork
23а 74-1723020-Б-01 - 1 - Fork

- 77 -
Fig.17.9. Output shaft of the synchronized gearbox

- 78 -
Group 17. Gearbox
Subgroup 1701. Output shaft of the synchronized gearbox

1021-1700010/-01/-04/
74-1700010/-01/-03/
-04/-05/-06/-07

-05/-07
Fig. Pos.
Designation Description
No. No.

17.9 1 74-1701260 1 Output shaft


2 6-67512 АШ2 ГОСТ 27365-87 1 Bearing
3 50-1701312 1 Bush
4 50-1701314 1 Gear
5 50-1701258 10* Gasket 0.2 mm
6 50-1701259 6* Gasket 0.5 mm
7 50-1701255 1 Cage
8 6-7610 АШ2 ГОСТ 27365-87 1 Bearing
9 50-1701254-А 1 Washer
10 50-1701105-Б** 1 Gear
11 50-1701253 1 Nut
12 5х45.019 ГОСТ 397-79 1 Cotter pin
13 М12-6g х35.88.35.019 ГОСТ 7796-70 4 Bolt
14 12ОТ ОСТ 37.001.115-75 4 Washer
* Maximum quantity. Selection
** The gear 50-1701105-Б is only delivered as a spare part complete with gear 50-2403021-Б

- 79 -
Without speed reducer

Fig.17.10. Shaft of the first gear and reverse

- 80 -
Group 17. Gearbox
Subgroup 1701. Shaft of the first gear and reverse

74-1700010/-01/-03/-04/-05/-06/-07
1021-1700010/-01/-04/-05/-07
72-1700010-Б1/-01/-08
70-1700010-Б1/-01
72-1700010-Б1-03

72-1700010-Б1-07
Fig. Pos.
Designation Description
No. No.

17.10 70-1701080 - 1 1 Gear (1, 2)


Shaft of the first gear and re-
50-1701380-А - 1 -
verse (7-9, 14-19)
Shaft of the first gear and re-
70-1701380 1 - 1
verse (7-17)
1 70-1701082 - 1 1 Gear
3КК30х35х46Е
2 - 1 1 Bearing
ТУ РБ 00234873.003-99
3 50-1701434-А - 1 1 Shaft
4 50-1702082-А 1 1 1 Slat
5 10 ОТ ОСТ 37.001.115-75 2 2 2 Washer
М10-6g х25.88.35.019
6 2 2 2 Slat
ГОСТ 7796-70
7 ХЧМ-1701163 2 2 2 Ring
8 208А ГОСТ 8338-75 1 1 1 Bearing
9 2С65 ГОСТ 13940-86 1 1 1 Ring
10 70-1701072 1 - 1 Gear
11 70-1701224 1 - 1 Gear
70-1701382 Shaft of the first gear and re-
12 1 - 1
verse
13 70-1701226 1 - 1 Washer
14 2С50 ГОСТ 13940-86 1 2 1 Ring
15 50-1701212-А 1 1 1 Gear
50308А ГОСТ 8338-75/
16 1 1 1 Bearing
ГОСТ 2893-82
17 90 ГОСТ 2893-82 1 1 1 Ring
50-1701382-А Shaft of the first gear and re-
18 - 1 -
verse
19 Ф50-1701224 - 1 - Gear

- 81 -
Synchronized GB

Mechanizal GB

Fig.17.11. Intermediate shaft. Internal shaft.

- 82 -
Group 17. Gearbox
Subgroup 1701. Intermediate shaft. Internal shaft

1021-1700010/-01/-04/
72-1700010-Б1/-01/-

74-1700010/-01/-03/
70-1700010-Б1/-01

72-1700010-Б1-03

-04/-05/-06/-07

-05/-07
07/-08
Fig. Pos.
Designation Description
No. No.

17.11 Ф50-1701065* 1 1 - Gear (7-10)


74-1701070* - - 1 Gear (8, 30-32)
50-1701190-А 1 1 1 Gear (14-19)
1 50-1701181 1 1 1 Nut
2 60210АУШ1 ГОСТ 7242-81 1 1 1 Bearing
3 50-1701184 1 1 1 Bearing housing
4 50-1701218 1 1 1 Gear
5 50-1701216 1 1 1 Gear
6 70-1701182-Б 1 - - Intermediate shaft
70-1701182-Б-01 - 1 1 Intermediate shaft
7 50-1701214 1 1 - Gear
3КК72х82х45Е
8 1 1 1 Bearing
ТУ РБ 00234873.003-99
9 Ф50-1701056-Б 1 1 - Gear
10 50-1701183 1 1 1 Washer
11 50-1701187 1 1 1 Stop
12 70-1701196 1 1 1 Gear
13 50-1701185 1 1 1 Internal shaft
14 2С75 ГОСТ 13940-86 1 1 1 Ring
15 50-1701401 1 1 1 Impeller
16 2С115 ГОСТ 13941-86 1 1 2 Ring
6-12115ЕМУШ1
17 1 1 2 Bearing
ГОСТ 8328-75
18 50-1701198-А 1 1 1 Gear
19 50-1701195 1 1 1 Cage
20 12 ОТ ОСТ 37.001.115-75 1 1 4 Washer
М12-6g х35.88.35.019
21 4 4 4 Bolt
ГОСТ 7796-70
22 2С80 ГОСТ 13941-86 1 1 1 Ring
23 307А ГОСТ 8338-75 1 1 1 Bearing
24 50-1701188 1 1 1 Bush
25 А.8х45.65Г ГОСТ 14229-93 1 1 1 Spring pin
26 70-1701186 1 1 1 Front housing
27 10 ОТ ОСТ 37.001.115-75 1 1 3 Washer
М10-6g х35.88.35.019
28 3 3 3 Bolt
ГОСТ 7796-70
29 2С60 ГОСТ 13940-86 1 1 1 Ring
30 74-1701055-Б - - 1 Bush
31 74-1701057-Б - - 1 Bush
32 74-1701056-Б - - 1 Gear
* For ordering as spare parts

- 83 -
Fig.17.12. Mechanical gearbox control mechanism. Fork body.

- 84 -
Group 17. Gearbox
Subgroup 1702. Mechanical gearbox control mechanism. Fork body.

GB 70/72-1700010-Б1-02
with limiting the maxi-
72-1700010-Б1/-01/
70-1700010-Б1/-01

82-1700010-01
mum speed
-03/-07/-08

(optional)
Fig. Pos.
Designation Description
No. No.

17.12 50-1702080-А 1 - - Fork body (5-13, 16-19)


50-1702080-А-01 - 1 - Fork body (5-13, 16-27)
822-1702080 - - 1 Fork body (5-13, 16-19)
1 50-1702063 1 1 1 Roller
2 50-1702028 1 1 1 Fork
3 36-1702110 1 1 1 Screw
4 1,6-О-С ГОСТ 3282-74 1 1 1 Wire (L=200 mm)
5 50-1702095-А1 1 1 - Arm
922-1702095 - - 1 Arm
6 50-1702116 1 1 1 Fork of the 4th and 5th gears
7 50-1702081 3 2 3 Slat of the forks
8 10ОТ ОСТ 37.001.115-75 2 2 2 Washer
М10-6g х35.88.35.019 ГОСТ
9 2 2 2 Bolt
7796-70
10 10,0-60 ГОСТ 3722-81 4 4 4 Ball
11 50-1702107-А 3 2 3 Tightening plate
М10-6g х25.88.35.019 ГОСТ
12 6 6 6 Bolt
7796-70
13 50-1702083 3 3 3 Locking slat
14 50-1702092 2 2 2 Bolt
15 12ОТ ОСТ 37.001.115-75 2 2 2 Washer
16 50-1702085 1 1 1 Fork body
17 50-1702148-А 4 4 4 Spring
18 50-1702096 1 1 1 Fork of the 3rd and 6th gears
Fork of the first gear and re-
19 74-1702086 1 1 1
verse
20 70-1702073 - 1 - Rod
21 70-1702077 - 1 - Spring
22 70-4605163 - 1 - Washer
23 2х20 ГОСТ 397-79 - 1 - Cotter pin
24 7,938-100 ГОСТ 3722-81 - 1 - Ball
25 50-1702107 - 2 - Retaining washer
26 70-1702072 - 1 - Bracket
27 70-1702071 - 1 - Rod

- 85 -
Fig.17.13. Synchronized gearbox control mechanism. Fork body.

- 86 -
Group 17. Gearbox
Subgroup 1702. Synchronized gearbox control mechanism. Fork body.

74-1700010-06/-07
1021-1700010-07

74-1700010/-01/

74-1700010-03
1021-1700010/
-01/-04/-05

-04/-05
Pos.
Fig. No. Designation Description
No.

17.13 Fork body (2-5, 8-13, 15,


922-1702080 1 - - - -
19-21)
922-1702080-02 Fork body (2-5, 8-13, 15,
- 1 - - -
19-20, 22-24)
74-1702080 Fork body (2-5, 8-12, 15,
- - 1 - -
19, 20)
74-1702080-01 Fork body (2-5, 8-12, 15,
- - - 1 -
19, 20, 22-24)
74-1702080-02 Fork body (2-5, 8-12, 15,
- - - - 1
19, 20, 22-24)
1 50-1702063 1 1 1 1 1 Roller
2 74-1702096 1 1 1 1 1 Fork of the 4th (direct) gear
3 922-1702095 1 1 - - - Arm
74-1702095 - - 1 1 1 Arm
4 10,0-60 ГОСТ 3722-81 5 6 5 6 6 Ball
5 50-1702085 1 1 1 1 1 Fork body
10 ОТ
6 2 2 2 2 2 Washer
ОСТ 37.001.115-75
М10-6g х30.88.35.019
7 2 2 2 2 2 Bolt
ГОСТ 7796-70
8 50-1702148-А 4 4 4 4 4 Spring
9 50-1702081 2 2 3 2 2 Slat of the forks
10 50-1702107-А 3 2 3 2 2 Tightening plate
М10-6g х25.88.35.019
11 6 6 6 6 6 Bolt
ГОСТ 7796-70
12 74-1702040 1 1 1 1 1 Slat
13 50-1702092 2 2 2 2 2 Bolt
12ОТ
14 2 2 2 2 2 Washer
ОСТ 37.001.115-75
15 50-1702083 2 2 2 2 2 Locking slat
16 36-1702110 1 1 1 1 1 Screw
17 1,6-О-С ГОСТ 3282-74 1 1 1 1 1 Wire (L=200 mm)
18 50-1702028 1 1 1 1 1 Fork
19 74-1702116 1 1 1 1 1 Fork of 2nd and 3rd gears
Fork of the first gear and
20 74-1702086 1 1 1 1 1
reverse
21 74-1702081 1 - - - - Slat
22 50-1702107 - 2 - 2 2 Retaining washer
23 74-1702201 - 1 - 1 1 Casing
24 74-1702202 - - - 1 - Arm
74-1702202-01 - 1 - - 1 Arm

- 87 -
Fig.17.14. Right single-lever gearbox control mechanism.

- 88 -
Group 17. Gearbox
Subgroup 1703. Right single-lever gearbox control mechanism.

72-1700010-Б1-01/
70-1700010-Б1/-01

74-1700010-01/
72-1700010-Б1

74-1700010/
-03/-07/-08

-03/-05/-07
-04/-06
Fig. Pos.
Designation Description
No. No.

17.14 70-1703010-А1 1 - - - Gearbox cover (1-39)


70-1703010-А1-01 - 1 - - Gearbox cover (1-39)
70-1703010-А1-02 - - 1 - Gearbox cover (1-39)
70-1703010-А1-03 - - - 1 Gearbox cover (1-39)
1 70-1703025-Б 1 1 1 1 Cover
2 50Л-3724050 1 1 1 1 Boot
3 ВК 12-51 ТУ РБ 37334210.015-97 1 1 1 1 Switch
4 70-1703201-Б-01 1 1 1 1 Shaft
5 СШ-611 1 1 1 1 Key
6 70-1703210-Б 1 1 1 1 Support
030-034-25-1-4
7 1 1 1 1 Ring
ГОСТ 18829-73/9833-73
8 С12.01.019 ГОСТ 6958-78 2 2 2 2 Washer
9 50-2403034-01 1 1 1 1 Bolt
10 ШЦК 8х20 1 1 1 1 Pin
11 35-10кл.Ц9.Хр ГОСТ 3111-81 1 1 1 1 Choke
12 70-1703220-А 1 1 1 1 Lever
13 70-1702125 1 1 1 1 Handle
14 70-1703203-А 1 1 1 1 Boot
15 70-1703202-А 1 1 1 1 Arm
16 ШЦК 8х25 1 1 1 1 Pin
17 3,2х25.019 ГОСТ 397-79 1 1 1 1 Cotter pin
18 М12-6Н.04.019 ГОСТ 5919-73 1 1 1 1 Nut
19 70-1703205 1 1 1 1 Stop
20 80-3503048 1 - 1 - Bracket
952-1802030 - 1 - 1 Bracket
21 М12-6g х20.88.35.019 ГОСТ 7796-70 2 2 2 2 Bolt
22 12 ОТ ОСТ 37.001.115-75 2 2 2 2 Washer
23 70-1702053 1 1 1 1 Plug
24 70-1703204 1 1 1 1 Bolt
25 М16-6H.04.019 ГОСТ 5916-70 1 1 1 1 Nut
26 50-1702148-А 1 1 1 1 Spring
27 ПК КГ 11/4˝ 1 1 1 1 Plug
28 13,8-60 1 1 1 1 Ball
29 М10-6g х60.88.35.019 ГОСТ 7795-70 2 2 2 2 Bolt
30 10 ОТ ОСТ 37.001.115-75 13 13 13 13 Washer
31 28-10кп.Ц9.хр ГОСТ 3111-81 1 1 1 1 Choke
32 М10-6g х35.88.35.019 ГОСТ 7796-70 10 10 10 10 Bolt
33 М10-6g х30.88.35.019 ГОСТ 7796-70 1 1 1 1 Bolt
34 70-1703011 1 1 1 1 Lever
35 М10-6g х18.88.35.019 ГОСТ 7796-70 4 4 4 4 Bolt
36 50-1702107-А 2 2 2 2 Tightening plate
37 70-1703084 1 1 - - Plate
74-1702084 - - 1 1 Plate
38 70-1703057 1 1 1 1 Spring
39 70-1703058 1 1 1 1 Washer
40 50-1702026 1 1 1 1 Gasket

- 89 -
Fig.17.15. Right two-lever gearbox control mechanism

- 90 -
Group 17. Gearbox
Subgroup 1703. Right two-lever gearbox control mechanism.

82-1700010-01
1021-1700010/
-01/-04/-05/07
Fig. Pos.
Designation Description
No. No.

17.15 920-1702010 1 - Gearbox control (1-18, 21-34, 38-46)


920-1702010-03 - 1 Gearbox control (1-18, 21-34, 38-46)
920-1702090 1 1 Casing (1-18, 21-24, 27, 30, 45, 46)
1 922-1702021 2 2 Bolt
2 50-1702107 2 2 Plate
3 922-1702017 1 1 Lever
4 920-1702020 1 1 Shaft
5 М12-6Н.04.019 ГОСТ 5919-73 1 1 Nut
6 3,2х18.019 ГОСТ 397-79 3 3 Cotter pin
7 80-1702108 1 1 Bolt
8 922-1702018 1 1 Fork
9 12х32 ОСТ 37.001.163-75 2 2 Pin
10 80С-1702074 2 2 Fork
11 77.37.117 2 2 Spring
12 142-1702032 2 2 Sphere
13 В.М6-6g х20.58.019 ГОСТ 17473-80 4 4 Screw
14 6Т ОСТ 37.001.115-75 5 5 Washer
15 920-1702023 1 1 Cover
16 922-1702024 1 1 Gasket
17 922-1702011-01 1 1 Casing
18 922-1702019 1 1 Boot
19 920-1702060/-01 1 1 Lever
20 920-1702050 1 1 Lever
21 10 ОТ ОСТ 37.001.115-75 11 11 Washer
22 М10-6g х30.88.35.019 ГОСТ 7796-70 11 11 Bolt
23 ШЦК 10х25 4 4 Pin
24 922-1702026 2 2 Gasket
25 ВК 12-41 ТУ РБ 37334210.015-97 1 1 Switch
26 923-1702023 - 4 Choke
27 920-1702012 1 1 Spacer
28 922-1702025 1 1 Cover
29 50-1701130 1 1 Breather
30 В.М6-6g х50.58.019 ГОСТ 17473-80 1 1 Screw
31 С12.01.019 ГОСТ 11371-78 2 2 Washer
32 920-1702313 1 1 Spring
33 50-1702048 3* 3* Adjusting spacer
34 920-1702314 1 1 Screw
38 80-1702098 1 1 Washer
39 80С-1702302 1 1 Casing
40 70-1703011 1 1 Lever
41 М10-6gх18.88.35.019 ГОСТ 7796-70 4 4 Bolt
42 50-1702107-А 2 2 Tightening plate
43 922-1702084 1 - Plate
822-1702084 - 1 Plate
44 920-1702016 1 1 Lever
45 СШ-611 1 1 Key
46 920-1702015 1 1 Pipe
* Maximum quantity. Selection

- 91 -
Fig.18.1. Transfer gearbox (for Belarus-920/920.2/920.3/952/952.2/952.3)

- 92 -
Group 18. Transfer gearbox
Subgroup 1802. Transfer gearbox
(for Belarus-920/920.2/920.3/952/952.2/952.3)
Fig. No. Pos.
Designation Q-ty Description
No.
18.1 72-1802020 1 Transfer gearbox (1-27,36-41)
72-1802060 Gear with free-wheeling clutch (19-21,
1
23-27,36,37)
72-1802062-А1 1 Bush (24,25)
52-1802094РН 1 Shaft (28,35)
52-1802095-Б 1 Intermediate gear (32-34)
52-1802100-А 1 Casing (5,6,9)
52-1802110-А 1 Roller set (19-21,24)
72-1802125РБ 1 Gear (12,19-27,36-38)
1 4х25.019 ГОСТ 397-79 2 Cotter pin
2 70-3003032 2 Nut
3 52-1802079 1 Washer
4 52-1802078-А 1 Flange
2.2-38х58-1 Cuff
5 1
ГОСТ 8752-79/ОСТ 3805146-78
6 72-1802108 1 Fixture
7 М8-6gх25.88.35.019 ГОСТ 7796-70 4 Bolt
8 8Т ОСТ 37.001.115-75 4 Washer
9 52-1802073 1 Casing
10 52-1802074 1 Gasket
11 306А ГОСТ 8338-75 1 Bearing
12 72-1802063 1 Shaft
13 72-1802082 1 Lever
14 А.10х40.65Г 1 Pin
Chemical phosphate oil-impregnated coat-
ing ГОСТ 14229-93
15 52-1602065-А 1 Casing
16 305А ГОСТ 8338-75 1 Bearing
17 72-1802064 1 Washer
18 52-1802076 1 Cover
19 52-1802069-Б 16 Pin
20 52-1802066-А 16 Spring
21 52-1802111 16 Plug
22 70-1601082 2 Washer
52-1802077 or 8 Roller
23
52-1802077РН 8 Roller
24 72-1802131-Б 1 Bush
25 943/30 ГОСТ 4060-78 2 Bearing
26 115К5 ГОСТ 8338-75 2 Bearing
27 52-1802102-А 2 Ring
28 52-1802128 1 Nut
29 52-1802093 1 Screw
30 12 ОТ ОСТ 37.001.115-75 1 Washer
31 52-1802092-Б 1 Bush
32 7306А ГОСТ 27365-87 2 Bearing
33 52-1802091 1 Gear
34 52-1802097 1 Ring
35 52-1802094 1 Shaft
36 52-1802061-А 1 Gear
37 52-1802067 2 Fixture
38 72-1802068 1 Clutch
39 52-1802084 1 Fork
40 52-1802080-Б1 1 Roller with lever
41 020-025-30-1-4 ГОСТ 18829-73/9833-73 1 Ring

- 93 -
Fig.18.2. Transfer gearbox control (for single-lever gearbox control mechanism)

- 94 -
Group 18. Transfer gearbox
Subgroup 1802. Transfer gearbox control (for single-lever gearbox control mechanism)

Fig. No. Pos.


Designation Q-ty Description
No.
18.2 1 8х30 ОСТ 37.001.163-75 1 Pin
2 952-1802012 1 Fork
3 М12х1,25-6Н.6.019 ГОСТ 5915-70 1 Nut
4 952-1802026 1 Rod
5 952-1802032 1 Bush
6 952-1802031-А 1 Bracket
7 С20 ГОСТ 13940-86 1 Ring
8 952-1802027 1 Guide
9 М8-6Н.6.019 ГОСТ 5915-70 2 Nut
10 952-1802011 1 Rod
11 3,2х18.019 ГОСТ 397-79 2 Cotter pin
12 50-4607082-А 1 Bush
13 952-1802020 1 Bracket
14 С 8.01.019 ГОСТ 6958-78 3 Washer
15 8Т ОСТ 37.001.115-75 3 Washer
16 М8-6gх30.88.35.019 ГОСТ 7796-70 2 Bolt
17 А13.11.000 1 Handle
18 952-1802015 1 Lever
19 10,0-60 ГОСТ 3722-81 1 Ball
20 50-1702148-А 1 Spring

- 95 -
Fig.18.3. Transfer gearbox control (for two-lever gearbox control mechanism)
- 96 -
Group 18. Transfer gearbox
Subgroup 1802. Transfer gearbox control (for two-lever gearbox control mechanism)

Fig. No. Pos.


Designation Q-ty Description
No.
18.3 1 8х30 ОСТ 37.001.163-75 1 Pin
2 952-1802012 1 Fork
3 М12х1,25-6Н.6.019 ГОСТ 5915-70 1 Nut
4 920-1802026 1 Rod
5 952-1802027 1 Guide
6 М8-6Н.6.019 ГОСТ 5915-70 1 Nut
7 952-1802011 1 Rod
8 А13.11.000 1 Handle
9 С 14.01.019 ГОСТ 11371-78 1 Washer
10 3,2х18.019 ГОСТ 397-79 2 Cotter pin
11 920-1802015 1 Lever
12 920-1802012 1 Housing
13 70-4605308-Б 1 Bush
14 3,2х20.019 ГОСТ 397-79 1 Cotter pin
15 920-1802020 1 Bracket
16 М8-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
17 8Т ОСТ 37.001.115-75 2 Washer
18 С 8.01.019 ГОСТ 6958-78 2 Washer
19 С.6.01.019 ГОСТ 6958-78 2 Washer
20 6Т ОСТ 37.001.115-75 2 Washer
21 В.М6-6gx14.58.019 ГОСТ 17473-80 2 Screw
22 10,0-60 ГОСТ 3722-81 1 Ball
23 50-1702148-А 1 Spring
24 С20 ГОСТ 13940-86 1 Ring
25 920-1802031-А 1 Bracket
26 952-1802032 1 Bush

- 97 -
Fig. 22.1. Cardan shaft. Intermediate cardan shaft bearing. (for Belarus-
920/920.2/920.3/952/952.2/952.3)

- 98 -
Group 22. Cardan drive
Subgroup 2203, 2209. Cardan shaft. Intermediate cardan shaft bearing
(for Belarus-920/920.2/920.3/952/952.2/952.3)
Fig. No. Pos.
Designation Q-ty Description
No.
22.1 Front and intermediate cardan shaft (34,
72-2203010-А2 2
36-42)
Cross with glands and bearings (36, 37,
72-2203025РН 4
39, 40)
72-2209100 1 Packing gland (6, 8)
72-2209010-А 1 Intermediate bearing (1-18, 21-30)
1 72-2209014 1 Flange
2 055-065-58-1-4 ГОСТ 18829-73/9833-73 1 Ring
3 8-6gx30.88.35.019 ГОСТ 7796-70 5 Bolt
4 8Т ОСТ 37.001.115-75 5 Washer
5 72-2209028 1 Dirt pocket
6 72-2209022 1 Casing
7 72-2209023 1 Gasket
8 2.2-75x100-1 ГОСТ 8752-79 2 Cuff
9 72-2209013 1 Shaft
10 72-2209017 1 Bush
11 72-2209019 3 Disk
12 72-2209025 10-11 Disk
13 72-2209027 10 Disk
14 115К5 ГОСТ 8338-75 2 Bearing
15 72-2209012 1 Bush
16 72-2209018 2 Fixture
17 ПК КГ 3/8" 2 Plug
18 72-2209011 1 Bracket
19 М10х1-8 DIN EN ISO 10511-98 16 Nut
21 4x25.019 ГОСТ 397-79 1 Cotter pin
22 70-3003032 1 Nut
23 52-1802079 1 Washer
24 52-1802078-А 1 Flange
25 72-2209016-Б 1 Washer
26 038-046-46-1-4 ГОСТ 18829-73/9833-73 1 Ring
27 72-2209021 6 Spring
28 72-2209031 1 Fixture
29 52-2308094 2 Pin
30 12-12-306 2 Ring
31 16ОТ ОСТ 37.001.115-75 3 Washer
32 72-2203011 3 Bolt
33 20-2201024 4 Gasket
34 72-2203023 4 Flange
35 52-2203012 16 Bolt М10x1
36 72-2203030-01 4 Cross
37 3102-2201037 16 Deflector
38 72-2203043 16 Locking ring
39 69-2201031-А 16 Cuff
40 704702К3С10 ТУ 37.006.065-90 16 Bearing
41 72-2201018-02 2 Pipe
42 72-2203022 4 Fork

- 99 -
Fig.22.2. Cardan drive guard
(for Belarus-920/920.2/920.3/952/952.2/952.3)
- 100 -
Group 22. Cardan drive
Subgroup 2210. Cardan drive guard
(for Belarus-920/920.2/920.3/952/952.2/952.3)
Fig. No. Pos.
Designation Q-ty Description
No.
22.2 72-2203040 1 Cardan drive guard (1-11)
1 52-2210040 1 Supporting bracket
2 72-2210013 1 Rear guard
3 8Т ОСТ 37.001.115-75 7 Washer
4 М8-6Н.6.019 ГОСТ 5915-70 2 Nut
5 72-2210030 1 Clamp
6 М8-6gx40.88.35.019 ГОСТ 7796-70 1 Bolt
7 52-2210015 1 Bracket
8 М8-6gх16.88.35.019 ГОСТ 7796-70 5 Bolt
9 52-2210012-А 1 Front guard
10 52-2210017-А 1 Guard
11 72-2210020-А 1 Bracket

- 101 -
Fig.23.1. Front driving axle 72-2300020-А

- 102 -
Group 23. Front driving axle
Subgroup 2300. Front driving axle 72-2300020-А.

Fig. No. Pos.


Designation Q-ty Description
No.
23.1 72-2300020-А-05 Front driving axle assembly
1
(8 pins)
А 52-2302010 1 Gear (Fig.23.3)
Б 52-2303010-Б 1 Differential (Fig.23.4)
Reduction gear of the left final drive of the
В 72-2308005-08 1
front driving axle (Fig.23.5)
Reduction gear of the right final drive of
Г 72-2308010-07 1
the front driving axle (Fig.23.5)
52-2301040-Б1 2 Fixture with cuffs (11,12)
1 82-2301051 2 Cover
2 6-7212А ГОСТ 27365-87 2 Bearing
3 52-2302019 1 Driven gear
4 52-2302038-A1 1 Nut
5 СУ 1/8"-А 1 Breather
6 72-2301055 1 Casing
7 ПК КГ 3/4" 2 Plug
8 Д01-015 6 Pin
9 52-2303027 16(mах) Adjusting spacer В=0.5 mm
10 52-2303028 16(mах) Adjusting spacer В=0.2 mm
11 52-2301062-Б1 2 Fixture
12 2.2-45х65-1 4 Cuff
ГОСТ 8752-79/ОСТ 3805146-78
13 150-155-36-1-4 ГОСТ 18829-73/9833-73 2 Ring
14 М8-6gх16.88.35.019 ГОСТ 7796-70 8 Bolt
15 8Т ОСТ 37.001.115-75 8 Washer
16 50-3104051 2 Cover
17 52-2301052 2 Screw
18 16 ОТ ОСТ 37.001.115-75 21 Washer
19 М16-6gх40.88.35.019 ГОСТ 7796-70 17 Bolt
20 52-2301054-А 2 Shaft
21 52-2301067 2 Choke
22 82-2301069 2 Pin
23 5х45.019 ГОСТ 397-79 2 Cotter pin
24 82-2301074 2 Plug
25 102-2301023-01 1 Hydraulic cylinder bracket
26 М12-6gх30.88.35.019 ГОСТ 7796-70 6 Bolt
27 12 ОТ ОСТ 37.001.115-75 10 Washer
28 52-2302021 6(mах) Adjusting spacer В=0.5 mm
29 52-2302022 10(mах) Adjusting spacer В=0.2 mm
30 089-095-36-1-4 ГОСТ 18829-73/9833-73 1 Ring
31 М12-6gх25.88.35.019 ГОСТ 7796-70 4 Bolt
32 72-2301059-А1 2 Slat
33 52-2301058-А4 2 Shaft
34 52-2301056 4 Wedge
35 52-2301065 4 Washer
36 М16х1,5-6Н.6.019 ГОСТ 5915-70 4 Nut

- 103 -
Fig.23.2. Front driving axle 822-2300020

- 104 -
Group 23. Front driving axle
Subgroup 2300. Front driving axle 822-2300020
Fig. No. Pos.
Designation Q-ty Description
No.
23.2 822-2300020-02*
1 Front driving axle assembly
822-2300020-04
А 52-2302010 1 Gear (seeFig.23.3)
Б 52-2303010-Б-01 1 Differential(seeFig.23.4)
Reduction gear of the left final drive of the
В 822-2308005 1
front driving axle(seeFig.23.6)
Reduction gear of the right final drive of the
Г 822-2308005-01 1
front driving axle (seeFig.23.6)
822-2301051-01*
1 1 Hose pipe left
822-2301051
2 263212А ТУ РБ 00234873.002-97 2 Bearing
3 52-2302019 1 Driven gear
4 52-2302038-A1 1 Nut
5 "MINTOR" TSS0G-1/8" 1 Breather
6 72-2301055 1 Casing
7 ПК КГ 3/4" 2 Plug
8 Д01-015 6 Setting pin
9 52-2303027 16(mах) Adjusting spacer В=0.5 mm
10 52-2303028 16(mах) Adjusting spacer В=0.2 mm
11 150-155-36-1-4 ГОСТ 18829-73/9833-73 2 Ring
822-2301053-01*
12 1 Hose pipe right
822-2301053
13 16 ОТ ОСТ 37.001.115-75 33 Washer
14 М16-6gх45.88.35.019 ГОСТ 7796-70 14 Bolt
15 1520-2308039 4 Cage
16 1027307А (31307) ГОСТ 27365-87 4 Bearing
17 822-2308100 2 Fixture
18 1.2-38х58-1 ГОСТ 8752-79/ОСТ 3805146-78 2 Cuff
19 2.2-38х58-1 ГОСТ 8752-79/ОСТ 3805146-78 2 Cuff
20 075-080-30-1-4 ГОСТ 18829-73/9833-73 2 Ring
21 85-3407113 2 Nut
22 1520-2308009 2 Screw
23 ПК КГ 3/8" 2 Plug
24 52-2302021 6(mах) Adjusting spacer В=0.5 mm
25 52-2302022 10(mах) Adjusting spacer В=0.2 mm
26 055-063-46-1-4 ГОСТ 18829-73/9833-73 4 Ring
27 1520-2308037 3 Shaft
28 1520-2308037-01 1 Shaft
29 М16-6gх40.88.35.019 ГОСТ 7796-70 16 Bolt
30 85-4607447 4 Cap
31 1.3.Ц9.хр ГОСТ 19853-74 4 Greaser
822-2308065-01*
32 2 Shaft
822-2308065
33 М16-6Н.6.019 ГОСТ 5915-70 3 Nut
34 1520-2308077 3 Bush
35 1520-2308079 3 Pin
922-2301023-Б-01*
36 1 Cylinder bracket
822-2301023-Б-01
37 1520-2308042 8(mах) Adjusting spacer В=0.2 mm
38 1520-2308042-01 20(mах) Adjusting spacer В=0.5 mm
39 089-095-36-1-4 ГОСТ 18829-73/9833-73 1 Ring
40 12 ОТ ОСТ 37.001.115-75 6 Washer
41 М12-6gх30.88.35.019 ГОСТ 7796-70 6 Bolt
42 М12-6gх25.88.35.019 ГОСТ 7796-70 4 Bolt
43 72-2301059-A1 2 Slat
43 52-2301058-A4 2 Shaft
* optionally (FDA with elongated tubes)

- 105 -
Fig. 23.3. Gear

- 106 -
Group 23. Front driving axle
Subgroup 2302. Front driving axle final drive

Fig. No. Pos.


Designation Q-ty Description
No.
23.3 52-2302010-Р 1 Gear set (1-12, 3(Fig.23.1,23.2))
Driven gear complete with the driving
52-2302030 1
one (1, 3(Fig.23.1,23.2))
1 52-2302015-А 1 Driving gear
7607А ГОСТ 27365-87 or
2 1 Bearing
6-7607АУ ГОСТ 27365-87
3 52-2302016-А 1 Cage
4 52-2302026 2* Adjusting washer В=2.65 mm
52-2302026-01 2* Adjusting washer В=2.70 mm
52-2302026-02 2* Adjusting washer В=2.75 mm
52-2302026-03 2* Adjusting washer В=2.90 mm
52-2302026-04 2* Adjusting washer В=3.05 mm
52-2302026-05 2* Adjusting washer В=3.20 mm
52-2302026-06 2* Adjusting washer В=3.30 mm
52-2302026-07 2* Adjusting washer В=3.35 mm
52-2302026-08 2* Adjusting washer В=3.40 mm
5 7506А ГОСТ 27365-87 1 Bearing
6 52-2302018 1 Ring
2.2-38х62-1/4
7 2 Cuff
ГОСТ 8752-79/ОСТ 3805146-78
8 82-2302031 1 Choke
9 52-1802078-А 1 Flange
10 52-1802079 1 Washer
11 70-3003032 1 Nut
12 4х25.019 ГОСТ 397-79 1 Cotter pin
* To be selected when adjusting the bearings

- 107 -
Fig. 23.4. Differential

- 108 -
Group 23. Front driving axle
Subgroup 2303. Differential

Fig. No. Pos.


Designation Q-ty Description
No.
23.4 52-2303010-Б 1 Differential (1-14)
(for FDA 72-2300020-А(Fig.23.1))
52-2303010-Б-01 Differential (1-14)
(for FDA 822-2300020(Fig.23.2))
52-2303030 2 Gear (5-7)
1 52-2303014-Б 1 Compensating case
2 52-2303015-Б 1 Compensating case
3 52-2303018 4 Pinion
4 52-2303019 2 Shaft
5 52-2303017 2 Gear
6 52-2303034 2 Gasket
7 35-10кп.Ц9.хр ГОСТ 3111-81 2 Choke
8 52-2303021 2 Cup
9 52-2303023-А1-01 2 Disk
10 52-2303024-01 2 Disk
11 52-2303023-А1 2 Disk
12 52-2303032 4 Plate
13 52-2303013 8 Nut
14 52-2303026-Б 8 Bolt

- 109 -
Fig. 23.5. Final drive reduction gear of the front driving axle
(for FDA 72-2300020-А (Fig.23.1))

- 110 -
Group 23. Front driving axle
Subgroup 2308. Final drive reduction gear
of the front driving axle (for FDA 72-2300020-А (Fig.23.1))

Fig. No. Pos.


Designation Q-ty Description
No.
23.5 72-2308005-08 1 Left reduction gear (1-69)
72-2308010-07 1 Right reduction gear (1-69)
72-2308020-Б 2 Cover (3, 43, 61)
72-2308030-А 2 Pipe (18,19, 66)
82-2308050-03 2 Gear (3, 7, 43-49, 52-61)
52-2308060 2 Gear (35-37)
72-2308070-01 2 Flange (48, 49)
72-2308090-Б 2 Casing (45, 46)
Upper bevel gear and pinion
52-2308100-03 2
(1-19,23,66,68,69)
52-2308110-А2 1 Right reduction gear casing (32-34, 62-64)
52-2308115-А2 1 Left reduction gear casing (32-34, 62-64)
52-2308135 2 Shaft with bearings (1-4)
52-2308135-01 2 Shaft with bearings (1-3, 5)
1 52-2308097 4 Nut
2 7507А ГОСТ 27365-87 8 Bearing
3 72-2308121 2* Adjusting ring В=5.8 mm
72-2308121-01 2* Adjusting ring В=5.95 mm
72-2308121-02 2* Adjusting ring В=6.10 mm
72-2308121-03 2* Adjusting ring В=6.25 mm
72-2308121-04 2* Adjusting ring В=6.40 mm
72-2308121-05 2* Adjusting ring В=6.55 mm
72-2308121-06 2* Adjusting ring В=6.70 mm
72-2308121-07 2* Adjusting ring В=6.85 mm
72-2308121-08 2* Adjusting ring В=7.00 mm
72-2308121-09 2* Adjusting ring В=7.15 mm
72-2308121-10 2* Adjusting ring В=7.30 mm
72-2308121-11 2* Adjusting ring В=7.45 mm
4 52-2308063 2 Shaft
5 52-2308065 2 Semiring
6 М8-6gх14.88.35.019 ГОСТ 7798-70 12 Bolt
7 8Т ОСТ 37.001.115-75 12 Washer
8 52-2308030-А 2 Cover
9 52-2308028-А1 4 Gasket
10 52-2308025 2 Casing
11 М10-6Н.6.019 ГОСТ 5915-70 2 Nut
12 72-2308046 2 Screw
14 52-2308038 8(max) Adjusting spacer В=0.5 mm
15 52-2308039 8(max) Adjusting spacer В=0.2 mm
16 095-100-30-1-4 ГОСТ 18829-73/9833-73 2 Ring
17 2.2-30х52-1 8 Cuff
ГОСТ 8752-79/ОСТ 3805146-78
18 52-2308054-А 2 Gasket
19 52-2308089-А 2 Fixture
20 50-3001022-А1 2 Spring
21 72-2308098-А 2 Washer
22 8208 ГОСТ 7872-89 2 Bearing
23 12 ОТ ОСТ 37.001.115-75 18 Washer
24 М12-6gх40.88.35.019 ГОСТ 7796-70 8 Bolt
25 М12х1,25-6Н.6.019 ГОСТ 5915-70 6 Nut
26 72-2308004 6 Pin
27 72-2308009 6 Bush
28 72-2308074 1 Lever right
* To be selected when adjusting the bearings

- 111 -
Fig. 23.5. Final drive reduction gear of the front driving axle
(for FDA 72-2300020-А (Fig.23.1))

- 112 -
Group 23. Front driving axle
Subgroup 2308. Final drive reduction gear
of the front driving axle (for 72-2300020-А (Fig.23.1))

Fig. No. Pos.


Designation Q-ty Description
No.
23.5 29 М12-6gх35.88.35.019 ГОСТ 7796-70 4 Bolt
30 72-2308075-01 1 Lever left
31 ПК КГ 3/4" 2 Plug
32 011-014-19-1-4 ГОСТ 18829-73/9833-73 2 Ring
33 52-2308099 2 Pin
34 52-2308014-А2 1 Right casing
52-2308015-А2 1 Left casing
35 208А ГОСТ 8338-75 2 Bearing
36 52-2308061 2 Gear
37 209А ГОСТ 8338-75 2 Bearing
38 52-2308024 2 Gasket
39 52-2308035 2 Cover
40 ПК КГ 3/8" 4 Plug
41 М10-6gх25.88.35.019 ГОСТ 7796-70 28 Bolt
42 10 ОТ ОСТ 37.001.115-75 28 Washer
43 6-7212А ГОСТ 27365-87 4 Bearing
44 72-2308023-Б 2 Gasket
45 72-2308066-Б 2 Casing
46 2.2-75х100-1 2 Cuff
ГОСТ 8752-79/ОСТ 3805146-78
47 72-2308029-Б 2 Dirt pocket
48 40-3103016 16 Bolt
49 82-2308017 2 Flange (8 pins)
50 40-3103017 16 Nut
51 70-3104019-01 2 Special (auxiliary) nut
52 М8-6gх25.88.35.019 ГОСТ 7796-70 10 Bolt
53 72-2308021-Б 16(max) Adjusting spacer В=0.5 mm
54 72-2308021-Б-01 8(max) Adjusting spacer В=0,8 mm
55 290-300-58-1-4 ГОСТ 18829-73/9833-73 2 Ring
56 72-2308018 4 Bolt
57 72-2308013 2 Plate
58 72-2308031 2 Washer
59 2310КМ ГОСТ 8328-75 2 Bearing
60 72-2308062 2 Gear
61 72-2308016-Б 2 Cover
62 М10-6gх30.88.35.019 ГОСТ 7796-70 20 Bolt
63 52-2308101 2 Casing
64 72-2308044 2 Washer
65 52-2308084-А1 2 Carriage
66 52-2308091-А 4 Ring
67 72-2308030-А 2 Pivot tube
68 52-2308096 2 Gasket
69 М12-6gх55.88.35.019 ГОСТ 7796-70 8 Bolt
70 72-2308011 4 Screw

- 113 -
Fig. 23.6. Final drive reduction gear of the front driving axle (for FDA 822-
2300020(Fig.23.2))

- 114 -
Group 23. Front driving axle
Subgroup 2308. Final drive reduction gear
of the front driving axle (for FDA 822-2300020(Fig.23.2))

Fig. No. Pos.


Designation Q-ty Description
No.
23.6 822-2308005 1 Left reduction gear (1-60)
822-2308005-01 1 Right reduction gear (1-60)
1520-2308024-20 2 Double universal joint (43-50)
1520-2308040-01 2 Casing (27, 29, 31-50)
1520-2308080 2 Cage (36, 37, 40)
1521-2308020 2 Cover (12-14)
1521-2308030 2 Carrier (6-11)
1521-2308050-01 2 Hub (1-20)
1 2С100 ГОСТ 13941-86 2 Ring
2 С45 ГОСТ 13940-86 2 Ring
3 53609 ГОСТ 24696-81 2 Bearing
4 1520-2308038 2 Ring
5 1520-2308062-01 2 Gear block (z=39)
6 1520-2308053 6 Shaft
7 1520-2308054 12 Washer
8 4х34,8А3 ГОСТ 6870-81 156 Roller
9 1520-2308059 6 Pinion
10 1521-2308056 2 Carrier
11 1520-2308011 6 Screw
12 2.8х25 ГОСТ 3128-70 6 Pin
13 1520-2308064 2 Gear
14 1521-2308016 2 Cover
15 М10-6gх35.88.35.019 ГОСТ 7796-70 20 Bolt
16 10 ОТ ОСТ 37.001.115-75 20 Washer
17 7514А GOST27365-87 2 Bearing
18 2.2-100х125-1 2 Cuff
ГОСТ 8752-79/ОСТ 3805146-78
19 1521-2308017-01 2 Flange
20 40-3103016 16 Front wheel bolt
21 М16-6Н.6.019 ГОСТ 5915-70 16 Nut
22 16 ОТ ОСТ 37.001.115-75 16 Washer
23 1520-2308077 12 Bush
24 822-2308074 1 Lever left
822-2308075 1 Lever right
25 1520-2308079 11 Pin
26 1520-2308079-02 1 Pin
27 1520-2308015 2 Casing
28 1520-2308034 2 Gasket
29 "MINTOR" TSS0G-1/8" 2 Breather
30 1021-2308076 1 Bracket
31 1521-2308012 2 Bolt
32 1521-2308031 2 Tightening plate
33 1521-2308013 2 Washer
34 2007109 ГОСТ 27365-87 4 Bearing
35 1520-2308061-01 2 Gear (z=20)
36 2.2-45х65-1 2 Cuff
ГОСТ 8752-79/ОСТ 3805146-78
37 100-105-30-2-4 2 Ring
ГОСТ 18829-73/ГОСТ 9833-73
38 1520-2308021 20(max) Adjusting spacer В=0.2 mm
39 1520-2308021-01 8(max) Adjusting spacer В=0.5 mm
40 1520-2308035 2 Cage
41 М8-6gх35.88.35.019 ГОСТ 7796-70 8 Bolt
42 8Т ОСТ 37.001.115-75 16 Washer

- 115 -
Fig. 23.6. Final drive reduction gear of the front driving axle (for FDA 822-
2300020(Fig.23.2))

- 116 -
Group 23. Front driving axle
Subgroup 2308. Final drive reduction gear
of the front driving axle (for 822-2300020(Fig.23.2))

Fig. No. Pos.


Designation Q-ty Description
No.
23.6 43 032-036-25-2-4 2 Ring
ОСТ 18829-73/ГОСТ 9833-73
44 1520-2308063-10 2 Fork
45 72-2203026-11 4 Cross
46 15.22.01.013-10 2 Double universal joint fork
47 704702К3С10 ТУ 37.006.065-90 16 Bearing
48 24-2201043-01 16(max) Locking ring
24-2201043-10 16(max) Locking ring
24-2201043-20 16(max) Locking ring
24-2201043-30 16(max) Locking ring
49 32 2 Choke
50 1520-2308048 2 Fork
51 М8-6gх25.88.35.019 ГОСТ 7796-70 8 Bolt
52 1520-2308004 2 Cover
53 1520-2308003 2 Gasket
54 80-1701045 2 Nut
55 80-1701056 2 Washer
56 7509А ГОСТ 27365-87 2 Bearing
57 1520-2308002 2 Cage
58 095-100-30-1-4 ГОСТ 18829-73/9833-73 2 Ring
59 ПК КГ 3/8" 2 Plug
60 ПК КГ 3/4" 2 Plug

- 117 -
Fig.24.1. Rear axle casing. Final drive

- 118 -
Group 24. Rear axle
Subgroup 2401, 2407. Rear axle casing. Final drive

Fig. No. Pos.


Designation Q-ty Description
No.
24.1 70-2401010-01 1 Rear axle (1-37)(twin-disk brake)
70-2401010-04 1 Rear axle (1-37)(three-disk brake)
Rear axle (1-39)(twin-disk brake, hy-
70-2401010-05 1
draulic lift)
Rear axle (1-39)(three-disk brake, hy-
70-2401010-06 1
draulic lift)
50-2407020-А-01 2 Half-axle tube (1-6, 21, 22)
50-2401040 1 Control roller (18-20)
50-2407030 2 Tube cover (1, 3)
1 50-2407028 2 Cover
2 50-2407029 2 Gasket
3 2.2-80х105-1 2 Cuff
ГОСТ 8752-79/ОСТ 3805146-78
4 217 А ГОСТ 8338-75 4 Bearing
5 50-2407082-А-01 2 Semiring
6 50-2407018-А-01 2 Half-axle tube
7 50-2407031-Б 4 Gasket
8 50-2407122 2 Gear
11 50-2401016-Б 2 Gasket
12 1,6-О-С ГОСТ 3282-74 1 Wire (200 mm)
13 36-1702110 2 Screw
14 50-2401020 1 Arm
15 80-2401050* 1 Lever
74-2401050** 1 Lever
16 50-2401025-А 1 Gasket
17 70-2401024* 1 Cover
70-2401024-01** 1 Cover
18 50-2401019-Б 1 Roller
19 020-025-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
20 50-2401031 2 Washer
21 12 ОТ ОСТ 37.001.115-75 19 Washer
22 М12-6gх30.88.35.019 ГОСТ 7796-70 19 Bolt
23 50-2401027-А 1 Gasket
24 50-2401060-А* 1 Cover with breather
1221-2401026** 1 Cover
28 М8-6gх16.88.35.019 ГОСТ 7796-70 4 Bolt
29 8Т ОСТ 37.001.115-75 4 Washer
30 Д01-015 2 Pin
32 50-2401015-01* 1 Casing
50-2401015-07** 1 Casing
33 70-1701300 1 Plug 1 1/4"
34 16 ОТ ОСТ 37.001.115-75 18 Washer
35 М16-6gх50.88.35.019 ГОСТ 7796-70 17 Bolt
36 85-2401080-A 1 Lever
37 М8-6gх55.88.35.019 ГОСТ 7795-70 1 Bolt
38 600-2401026** 1 Bolt
39 600-2401014** 1 Plate
* the tractor is equipped with power governor
**the tractor is equipped with hydraulic lift

- 119 -
Fig.24.2. Differential. Bearing cage
- 120 -
Group 24. Rear axle
Subgroup 2403. Differential. Bearing cage

Fig. No. Pos.


Designation Q-ty Description
No.
24.2 85-2403020 1 Differential (1-5, 9-15)
50-2403014 1 Final drive gears in pair (6, 7)
50-2407050-А-01 2 Cage cover (19, 21, 22)
85-2403015 1 Differential casing (10,15)
70-2407060 Left cage (24-29) (twin-disk brake)
1
70-2406060-04 Left cage (24-29) (three-disk brake)
70-2407060-01 Right cage (24-27, 29, 30) (24-29) (twin-
disk brake)
1
70-2407060-05 Right cage (24-27, 29, 30) (24-29)
(three-disk brake)
1 12 ОТ ОСТ 37.001.115-75 8 Washer
2 50-2403034-А 8 Bolt
3 50-2403049-Б 2 Bolster
4 85-2403055-01 4 Pinion with bush
5 85-2403025 4 Pinion washer
6 50-1701105-Б 1 Driving gear
7 50-2403021-Б or Driven gear
1
50-2403021-Б-01
8 7515А ГОСТ 27365-87 1 Bearing
9 50-1702092 12 Fitter bolt
10 85-2403018 1 Casing
11 50-2403023 6 Tightening plate
12 М12-6Н.6.019 ГОСТ 5915-70 12 Nut
13 50-2403048 2 Half-axle gear
14 50-2403062-А2 1 Cross
15 85-2403019 1 Cover
16 7215А ГОСТ 27365-87 1 Bearing
17 50-2407056 14 Gasket 0.5 mm
18 50-2407057 10 Gasket 0.2 mm
19 КФА-50х70 4 Cuff
20 М12-6gх25.88.35.019 ГОСТ 7796-70 4 Bolt
21 85-2407059 2 Cage cover
22 ЦС110-1414045-4 2 Ring
(104-110-40-1-4 ГОСТ 18829-73/9833-73)
23 50-1601352 4 Pin
24 50Х-2407042 2 Cage
25 160-165-36-1-4 ГОСТ 18829-73/9833-73 2 Ring
26 6-42212КМ ГОСТ 8328-75 4 Bearing
27 035-040-30-1-4 ГОСТ 18829-73/9833-73 4 Ring
28 70-2407053 1 Left gear (twin-disk brake)
70-2407053-04 Left gear (three-disk brake)
29 85-2407043 2 Ring
30 70-2407053-01 Right gear (twin-disk brake)
1
70-2407053-05 Right gear (three-disk brake)

- 121 -
Fig. 24.3. Differential lock mechanism

- 122 -
Group 24. Rear axle
Subgroup 2409. Differential lock mechanism

Fig. No. Pos.


Designation Q-ty Description
No.
24.3 70-2409010-Б
1 Lock-up clutch (1-9)
70-2409010-Б-01*
82P-2409050 1 Adapter (10, 13-20)
1 70-2409015-A 1 Clutch casing
70-3502040-01 or Brake disk
2 2
70-3502040-04
3 70-2409028 2 Throw-out disk
70-2409020
4 1 Lock-up shaft
70-2409020-01*
5 70-2409018 1 Pressure plate
6 70-2409021 1 Diaphragm
7 70-2409030-Б 1 Diaphragm cover
8 8Т ОСТ 37.001.115-75 8 Washer
9 М8-6gх40.88.35.019 ГОСТ 7795-70 8 Bolt
10 70-2409035-A6 1 Cover
11 12 ОТ ОСТ 37.001.115-75 5 Washer
М12-6gх200.58.019 ГОСТ 7795-70
12 5 Bolt
1522-2409034*
13 70-2409037 1 Connecting pipe
14 С40 ГОСТ 13940-86 1 Ring
15 82P-2409036A 1 Seal
16 70-2409026-Б 1 Adapter
020-025-30-1-4 ГОСТ 18829-73/ГОСТ Ring
17 1
9833-73
18 54-06-448-A 1 Spring
19 70-2409027-A 1 Bush
20 70-2409033-Б 1 Ring
*
Variant for three-disk brakes

- 123 -
Fig.24.4. Wet-type differential lock mechanism

- 124 -
Group 24. Rear axle
Subgroup 2409. Wet-type differential lock mechanism

Fig. No. Pos.


Designation Q-ty Description
No.
24.4 Lock-up clutch
80М-2409010 1
(1-3, 6, 7, 19, 20, 23-28)
1221М-2409050 1 Adapter (5,8-18,21)
1 80М-2409002 4 Pin
2 50-1702148-А 4 Spring
80М-2409028 1 Throw-out disk (S=4.7 mm)
80М-2409028-01 * Throw-out disk (S=4.4 mm)
80М-2409028-02 * Throw-out disk (S=4.1 mm)
80М-2409028-03 * Throw-out disk (S=3.8 mm)
3
80М-2409028-04 * Throw-out disk (S=3.5 mm)
80М-2409028-05 * Throw-out disk (S=3.2 mm)
80М-2409028-06 * Throw-out disk (S=3.0 mm)
4 1221М-3502039 5 Bolt
5 1221М-2409034 1 Cover
6 70-2409030-Б 1 Diaphragm cover
7 70-2409021 1 Diaphragm
8 В.М6-6gх10.58.019 ГОСТ 17473-80 8 Screw
9 6Т ОСТ 37.001.115-75 8 Washer
10 80М-2409037 1 Ring
11 80М-2409036 1 Seal
12 70-2409033-Б 1 Ring
13 70-2409027-А 1 Bush
14 54-06-448-А 1 Spring
15 70-2409026-Б 1 Adapter
16 020-025-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
17 70-2409037 1 Connecting pipe
18 32-50/9С6W 1 Clamp “NORMA”
19 70-2409020-02 1 Lock-up shaft
20 80М-2409018 1 Pressure plate
21 205-215-58-2-2 ГОСТ 18829-73/9833- 1 Ring
73
22 1221М-2409051 1 Gasket
23 М8-6gх40.88.35.019 ГОСТ 7795-70 8 Bolt
24 8Т ОСТ 37.001.115-75 8 Washer
25 80М-2409016 5 Intermediate disk
26 2522-1802035-А 6 Driving disk
27 80М-2409015 1 Clutch casing
28 80М-2409001 1 Hub
29 14 ОТ ОСТ 37.001.115-75 5 Washer
* To be selected for ensuring the necessary gap during the assembling

- 125 -
Fig.27.1. Hitch. Hook version (optional)

- 126 -
Group 27. Hitch
Subgroup 2707. Hitch. Hook version (optional).

Fig. No. Pos.


Designation Q-ty Description
No.
27.1 80-2707110-03 1 Hitch (1-45)
1 3,2х18.019 ГОСТ 397-79 3 Cotter pin
2 80-2807077 2 Gripping device
3 80-2707118 1 Bolt
4 80-2707137 4 Bolt
5 80-2707153 2 Washer
6 80-2707133-Б 1 Rod
7 12х32 ОСТ 37.001.163-75 1 Pin
8 3,2х25.019 ГОСТ 397-79 1 Cotter pin
9 70-2807079 1 Lever
10 50-3502203 1 Fork
11 М12х1,25-6Н.04.019 ГОСТ 5916-70 1 Nut
12 80-4619019 1 Pin
13 40-3104021 4 Bolt
14 70-2807044 4 Washer
15 50-1310136-А 1 Handle
16 М8-6Н.6.019 ГОСТ 5915-70 1 Nut
17 80-2807080-Б 1 Handle
18 85-2807092 1 Bracket
19 С 16.01.019 ГОСТ 11371-78 1 Washer
20 10 ОТ ОСТ 37.001.115-75 1 Washer
21 70-1602120-Б 1 Axle flange
22 М10-6gх16.88.35.019 ГОСТ 7796-70 1 Bolt
23 50-1605152 1 Spring
24 70-2807081 1 Bracket
25 80-2707120-Б1 1 Bracket
26 80-2707116 1 Side piece
27 М16-6gх50.88.35.019 ГОСТ 7796-70 8 Bolt
28 16 ОТ ОСТ 37.001.115-75 12 Washer
29 80-2707116-01 1 Side piece
30 80-2707141 1 Shaft
31 М16-6gх32.88.35.019 ГОСТ 7796-70 4 Bolt
32 6,3х36.019 ГОСТ 397-79 1 Cotter pin
33 70-4619042 1 Washer
34 70-2807039 2 Plate 1 mm
70-2807039-01 1 Plate 0.5 mm
70-2807039-02 2 Plate 0.2 mm
35 70-2807051 2 Shackle
36 70-2807052-Б 2 Screw
37 40-3405062 2 Nut
38 80-2707138 2 Washer
39 70-2807053-Б 2 Nut
40 80-2707130-Б 1 Cross-bar
41 80-2707123 2 Shaft
42 80-2707111-Б 1 Hook
43 5х36.019 ГОСТ 397-79 2 Cotter pin
44 80-2807026-01 2 Bolt
45 18 ОТ ОСТ 37.001.115-75 2 Washer

- 127 -
Fig.27.2. Hitch. “Pendulum” or “trailer” version (optional)

- 128 -
Group 27. Hitch.
Subgroup 2707. Hitch. “Pendulum” or “trailer” version

Fig. No. Pos.


Designation Q-ty Description
No.
27.2 80-2707110-01/-05 Hitch
1 80-4619019 1 Pin
2 80-2707133-Б 1 Rod
3 М12х1,25-6Н.04.019 ГОСТ 5916-70 1 Nut
4 50-3502203 1 Fork
5 12х32 ОСТ 37.001.163-75 1 Pin
6 3,2х18.019 ГОСТ 397-79 3 Cotter pin
7 3,2х25.019 ГОСТ 397-79 1 Cotter pin
8 С 16.01.019 ГОСТ 11371-78 2 Washer
80-2807080-Б 1 Handle
9
М8-6Н.6.019 ГОСТ 5915-70 1 Nut
10 50-1310136-А 1 Handle
11 85-2807092 1 Bracket
12 М10-6gх16.88.35.019 ГОСТ 7796-70 1 Bolt
13 8Т ОСТ 37.001.115-75 1 Washer
14 70-1602120-Б 1 Axle flange
15 70-2807079 1 Lever
16 50-1605152 1 Spring
17 70-2807081 1 Bracket
80-2707129 1 Left plate
18
80-2707129-01 1 Right plate
19 70-2807044 4 Washer
20 80-2707120-Б 1 Bracket
21 80-2707116 1 Side piece
22 80-2707141 1 Shaft
23 80-2707116-01 1 Side piece
24 16 ОТ ОСТ 37.001.115-75 14 Washer
25 М16-6gх50.88.35.019 ГОСТ 7796-70 8 Bolt
26 М16-6gх32.88.35.019 ГОСТ 7796-70 4 Bolt
27 70-4619042 1 Washer
28 6,3х36.019 ГОСТ 397-79 1 Cotter pin
29 70-2807039 2 Plate 1 mm
70-2807039-01 1 Plate 0.5 mm
70-2807039-02 2 Plate 0.2 mm
30 80-2707128 2 Pin
31 80-2707137 4 Bolt
32 80-2707153 2 Washer
33 80-2707077 2 Gripping device
34 А61.07.001 2 Cotter pin
35 80-2707130-Б 1 Cross-bar
36 80-2707149 3 Bolt
37 70-2807051 2 Shackle
38 70-2807052-Б 2 Screw
39 40-3405062 2 Nut
40 80-2707137 4 Bolt
41 80-2707138 2 Washer
42 70-2807053-Б 2 Nut
43 50-4605079-Б 1 Pin assembly
44 80-2707143 1 Liner
45 80-2707144-Б1 1 Rod (for assembly 80-2707110-А1-01)
46 80-2707123 2 Shaft
47 20 ОТ ОСТ 37.001.115-75 3 Washer
48 М20х1,5-6Н.6.019 ГОСТ 5915-70 3 Nut
49 80-2707126 2 Pin
50 5х36.019 ГОСТ 397-79 2 Cotter pin

- 129 -
Fig.27.2. Hitch. “Pendulum” or “trailer” version (optional)

- 130 -
Group 27. Hitch.
Subgroup 2707. Hitch. “Pendulum” or “trailer” version

Fig. No. Pos.


Designation Q-ty Description
No.
27.2 51 80-2807026-01 2 Bolt
52 18 ОТ ОСТ 37.001.115-75 2 Washer
53 80-2707124 1 Shackle
54 80-2707127 1 Pin
55 40-3104021 4 Bolt
56 80-2707118 1 Bolt
57 80-2707177 1 Plate
58 А61.05.004 2 Ring

- 131 -
Fig.27.3 Traction hitch mechanism

- 132 -
Group 27. Hitch
Subgroup 2707. Traction hitch mechanism

Fig. No. Pos.


Designation Q-ty Description
No.
27.3 1322-2707210 1 Traction hitch mechanism
1 1321-2707014 4 Bolt
2 1222-2707137 2 Plate
3 1321-2707011-Б 1 Plate
4 1321-2707030 1 Pin
5 16 ОТ ОГСТ 37.001.115-75 4 Washer
6 1220-4605506 4 Bolt
7 М6-6gх18.88.35.019 ГОСТ 7798-70 1 Bolt
8 С 6.01.019 ГОСТ 11371-78 1 Washer
9 6Т ОСТ 37.001.115-75 9 Washer
10 М6-6Н.6.019 ГОСТ 5915-70 1 Nut
11 921-2707068-02 2 Pin
12 М20-6Н.6.019 ГОСТ 5915-70 6 Nut
13 20 ОТ ОСТ 37.001.115-75 6 Washer
14 1321-2707083-Б 2 Cramp
15 921-2707068 2 Pin
16 М6-6gх12.88.35.019 ГОСТ 7798-70 4 Bolt
17 921-2707068-03 2 Pin
18 1322-2707274 1 Brace
19 1322-2707211 1 Bush
20 1322-2707280 1 Shield assembly
21 А.6х30.65Г ГОСТ 14229-93 1 Pin
22 А61.05.005 1 Locking pin
23 А61.05.004 1 Ring
24 1522-2707244 1 Brace
25 6,3х63.019 ГОСТ 397-79 1 Cotter pin
26 1321-2707070-Б-01 1 Plate
27 16 ОТ ОСТ 37.001.115-75 2 Washer
28 М16-6Н.6.019 ГОСТ 5915-70 4 Nut
29 1522-2707243 1 Nut
30 1522-2707242 1 Washer
31 1522-2707079-А 1 Pin assembly
32 921-2707055 1 Fork
33 А61.07.001-А 1 Cotter pin
34 1321-2707051-Б 1 Bracket
35 20 ОТ ОСТ 37.001.115-75 8 Washer
36 680-2707024 8 Bolt
37 1321-2707070-Б 1 Plate
38 1322-2707261 1 Side piece
39 900-2707135 2 (not more) Plate
40 900-2707135-01 2 (not more) Plate
41 900-2707135-02 2 (not more) Plate
42 1322-2707261-01 1 Side piece
43 1322-2707262-01 1 Bracket
44 М6-6gх16.88.35.019 ГОСТ 7798-70 4 Bolt
45 1322-2707262 1 Bracket

- 133 -
Fig.27.4. Traction hitch mechanism (equipment versions)

- 134 -
Group 27. Hitch
Subgroup 2707. Traction hitch mechanism (equipment versions)

Fig. No. Pos.


Designation Q-ty Description
No.
27.4 1321-2707150-Б 1 Rod (9-18,21)
1322-2707160 1 Python (28-33)
1 1322-2707130-Б 1 Cross-bar
2 1322-2707133 4 Bolt
3 1322-2707120-Б 1 Cramp
4 М20-6Н.6.019 ГОСТ 5915-70 4 Nut
5 М10-6gх20.88.35.019 ГОСТ 7796-70 2 Bolt
6 10 ОТ ОСТ 37.001.115-75 2 Washer
7 1522-2707126 1 Plate
8 1522-2707127 1 Axle
9 20 ОТ ОСТ 37.001.115-75 6 Washer
11 1523-2707149-Б 2 Bolt
12 А61.07.001-А 1 Cotter pin
13 Н50-4202146 1 Ring
14 1523-2707143 1 Liner
15 3,2х25.019 ГОСТ 397-79 1 Cotter pin
16 1522-2707079-А 1 Pin assembly
17 1523-2707142 1 Cramp
18 70-4235035 2 Chain
19 М16-6Н.6.019 ГОСТ 5915-70 2 Nut
20 16 ОТ ОСТ 37.001.115-75 2 Washer
21 1321-2707144-Б 1 Rod
22 1321-2707140-Б 1 Pin assembly
23 1321-2707042 1 Cotter pin
24 А61.05.004 1 Ring
25 А61.05.005 1 Locking pin
26 1522-2707030 1 Pin
1321-2707113-А or 1 Fork (EURO) L=110 mm
27
1321-2707111-А 1 Fork (ГОСТ) L=160 mm
28 1322-2707165 1 Plate with python
29 1322-2707162-01 1 Pin
30 1322-2707180 1 Pin
31 1322-2707161 1 Stop
32 А61. 07.001 1 Cotter pin
33 4х36.019 ГОСТ 397-79 1 Cotter pin
L – distance from the PTO end to the pin assembly axis.

- 135 -
Fig. 28.1. Semiframe

- 136 -
Group 28. Frame
Subgroup 2801. Semiframe

Fig. No. Pos.


Designation Q-ty Description
No.
28.1 80-2800010-02 1 Semiframe (1, 2, 11-14, 17)
1025-2800010-01*
70-2801120-A1-01 1 Front bar (1,17)
1025-2801120*
80-2806010-01** 1 Front towing arrangement (15,16,18,19)
1 50-2801124-A2-01 1 Front bar
1025-2801124*
2 80-2801050 1 Right-side member
80-2801050-01*
3 М16х6gx60.88.35.019 ГОСТ 7796-70 6 Bolt
4 16 ОТ ОСТ 37.001.115-75 25 Washer
5 70-2800016-01 2 Bolt
6 М16-6Н.6.019 ГОСТ 5915-70 1 Nut
7 70-2800016 2 Bolt
70-2800016-01*
8 50-3913214 2 Clamp
9 М16-6gx32.88.35.019 ГОСТ 7796-70 2 Bolt
10 80-3919106 2 Bracket
11 М16-6gx32.88.35.019 ГОСТ 7796-70 8 Bolt
12 М16-6gx45.88.35.019 ГОСТ 7796-70 4 Bolt
13 50-2800011 4 Bush
14 80-2801060 1 Left side member
80-2801060-01*
15 М20-6Н.6.019 ГОСТ 5915-70** 2 Nut
16 20 ОТ ОСТ 37.001.115-75** 2 Washer
17 40-3001022 2 Bush
18 80-2806011** 1 Front towing arrangement
19 70-4605036** 2 Bolt
20 A61.07.001** 2 Cotter pin
21 50-4605079-Б** 1 Pin assembly
* 900.3/920.3/950.3/952.3 (Euro-2)
** to be mounted in the absence of the front ballast

- 137 -
Fig.28.2. Towing arrangement

- 138 -
Group 28. Frame
Subgroup 2805. Towing arrangement

Fig. No. Pos. Number of the assembly Q-ty Description


No. unit or part
28.2 1 1 Bracket 550 0364-2
2 1 Towing arrangement ACV-40

- 139 -
Fig.28.3. Hydroficated drawbar

- 140 -
Group 28. Frame
Subgroup 2807. Hydroficated drawbar

Fig. No. Pos.


Designation Q-ty Description
No.
28.3 80-2807010 1 Drawbar (1-39)
80-2807040 1 Rod (31-33)
80-2807070 1 Hook (24, 25)
1 80-2807180-Б 1 Handle with catch
2 3,2х18.019 ГОСТ 397-79 3 Cotter pin
3 70-2807079 1 Lever
4 М10-6gх20.88.35.019 ГОСТ 7796-70 1 Bolt
5 10 ОТ ОСТ 37.001.115-75 1 Washer
6 50-1605152 1 Spring
7 70-1602120-Б 1 Axle flange
8 М16-6gх50.88.35.019 ГОСТ 7796-70 2 Bolt
9 16 ОТ ОСТ 37.001.115-75 2 Washer
10 70-2807081 1 Bracket
11 40-3104021 4 Bolt
12 70-2807044 4 Washer
13 80-2807014 1 Bracket
14 70-2807039 2 Plate 1.0 mm
70-2807039-01 1 Plate 0.5 mm
70-2807039-02 2 Plate 0.2 mm
15 70-2807051 2 Shackle
16 70-2807052-Б-01 2 Bar screw
17 40-3405062 2 Nut
18 70-2807053-Б 2 Bar nut
19 М20х1,5-6Н.04.019 ГОСТ 5919-73 2 Nut
20 4х36.019 ГОСТ 397-79 2 Cotter pin
21 С 20.01.019 ГОСТ 11371-78 2 Washer
22 18 ОТ ОСТ 37.001.115-75 2 Washer
23 80-2807026 2 Bolt
24 80-2807011 1 Hook
25 50-2807016 1 Hook axle
26 70-2807047 1 Axle
27 80-2807077 2 Gripping device
28 50-2807013-Б 1 Axle
29 36-3503018 2 Washer
30 6,3х36.019 ГОСТ 397-79 2 Cotter pin
31 80-2807043-Б 1 Rod
32 М12х1,25-6Н.04.019 ГОСТ 5916-70 2 Nut
33 50-3502203 1 Fork
34 12х32 ОСТ 37.001.163-75 1 Pin
35 3,2х25.019 ГОСТ 397-79 1 Cotter pin
36 С 16.01.019 ГОСТ 11371-78 1 Washer
37 85-2807092 1 Bracket
38 М8-6Н.6.019 ГОСТ 5915-70 1 Nut
39 50-1310136-А 1 Handle

- 141 -
Fig. 30.1. Front axle and steering link

- 142 -
Group 30. Front axle
Subgroup 3000. Front axle and steering link

Fig. No. Pos.


Designation Q-ty Description
No.
30.1 80-3000030-03 1 Front axle (1-7, 15, 18, 19, 22-35)
1220-3003010 1 Steering link (8-14, 16, 17, 20, 21)
1 80-3001065-01 1 Right journal with semiring
2 070-080-58-1-4 ГОСТ 18829-73/9833-73 2 Ring
3 70-3001101-А 2 Bush
4 80-3001070 2 Extensible knuckle
5 70-3001102-А 2 Bush
6 80-3001032 4 Washer
7 80-3001031 2 Washer
8 50-3003018-Б 2 Plug
9 1220-3003028 2 Lower bushing
10 1220-3003027 2 Bushing
11 1220-3003021 2 Ball pin
12 1220-3003023 2 Upper bushing
Universal joint housing with right-hand
13 1220-3003022 1
thread
Universal joint housing with left-hand
1220-3003022-01 1
thread
14 1220-3003029 2 Ring
15 70-3001040 1 Lever right
16 М20х1,5-6Н.04.019 ГОСТ 5919-73 4 Nut
17 4х36.019 ГОСТ 397-79 7 Cotter pin
18 50-3001087 2 Nut
19 27 Л ОСТ 37.001.115-75 2 Washer
20 1220-3003013 1 Locknut with right-hand thread
1220-3003013-01 1 Locknut with left-hand thread
21 1220-3003011 1 Pipe
22 50-3001010-А-01 1 Front axle
23 70-3001040-01 1 Lever left
24 80-3001065 1 left journal with semiring
25 50-3000011 1 Pivot pin
26 16х80 ОСТ 37.001.163-75 1 Pin
27 Ф80-3001011 1 Bracket
28 М16-6gх40.88.35.019 ГОСТ 7796-70 4 Bolt
29 Ф80-3001013 2 Plate
30 Д01-015 2 Pin
31 6-20h11х120.40Х.2.40 ГОСТ 9650-80 2 Axle
32 М18х1,5-6gх100.88.35.019 ГОСТ 7795-70 4 Bolt
33 18 ОТ ОСТ 37.001.115-75 4 Washer
34 М18х1,5-6Н.6.019 ГОСТ 5915-70 4 Nut
35 1.3.Ц9.хр ГОСТ 19853-74 2 Greaser
36 2,0-О-С ГОСТ 3282-74 2 Wire (270 mm)
37 1220-3003025-А 2 Boot

- 143 -
Fig. 31.1. Front guide wheels. Front wheel hubs. (For tractors with front axle)

- 144 -
Group 31. Wheels and hubs
Subgroup 3101, 3103. Front guide wheels.
Front wheel hubs. (For tractors with front axle)

Fig. No. Pos.


Designation Q-ty Description
No.
31.1 70-3103010-А 2 Front wheel hub (1-6)
1 2.2-80х105-1 2 Cuff
ГОСТ 8752-79/ОСТ 3805146-78
2 А04.03.020 2 Washer
3 7609А ГОСТ 27365-87 2 Bearing
4 А04.03.21 2 Hub
5 40-3103016 10 Bolt
6 7608А1 ГОСТ 27365-87 2 Bearing
7 А04.03.019 2 Washer
8 50-1701253-01 2 Nut
9 5х45.019 ГОСТ 397-79 2 Cotter pin
10 А04.03.014 2 Gasket
11 А04.03.013-А 2 Cover
12 8Т ОСТ 37.001.115-75 6 Washer
13 М8-6gх16.88.35.019 ГОСТ 7796-70 6 Bolt
16 70-3104019-01 2 Special (auxiliary) nut
17 40-3103017-01 8 Nut

50-3100110 2 Wheel 7.50-20 (fitted with tyre) (14, 15)


14 5.50F-20-3101020 or 2 Wheel 5.50Fx20 (disk and rim)
40-3101010-АЗ
15 2 Tyre 7.50-20

70-3100210-02 2 Wheel 9.00-20 (fitted with tyre) (14, 15)


5.50F-20-3101020 or
14 2 Wheel 5.50Fх20 (disk and rim)
40-3101010-АЗ
Tyre 9.00R20 model Бел-31 or
15 2 9.00-20 model ВФ-223 or
9.00R20 model Бел-311

- 145 -
Fig.31.2. Front driving wheels

- 146 -
Group 3101. Wheels and hubs
Subgroup 3101. Front driving wheels

Fig. No. Pos.


Designation Q-ty Description
No.
31.2 82-3101015-01 2 Wheel 11.2-20 (fitted with tyre) (1,2)
1 CW9-20-3101020-А 2 Wheel W9x20 (rim, wheel disk with 8
holes, protective visor)
2 2 Tyre 11.2-20

82-3101015-02 2 Wheel 11.2-20 (fitted with tyre) (1,2)


W9-20-3101020-А-01 Wheel W9x20 (rim, wheel disk with 5
1 2
holes, protective visor)
2 2 Tyre 11.2-20

86-3101020 2 Wheel 13.6-20 (fitted with tyre) (1,2)


1 CW12-20-3101015-А 2 Wheel W12x20 (rim, disk, protective visor)
2 2 Tyre 13.6-20 or
13.6R20 or
360/70R20
3 40-3103017-01 16 Nut

- 147 -
Fig.31.3. Front driving wheels

Fig.31.4. Front driving wheels

- 148 -
Group 3101. Wheels and hubs
Subgroup 3101. Front driving wheels

Fig. No. Pos.


Designation Q-ty Description
No.
31.3 822-3101010 2 Wheel 360/70R24 (fitted with tyre) (1-6)
W12-24-3101020-01 or
2 Wheel W12x24 (1,2,3,4,5)
880.3101012-01
1 W12-24-3101035 2 Rim W12x24 with brackets
2 W12-24-3101017 2 Disk
3 52-2301065 12 Washer
4 1221-3101011 12 Bolt
5 1221-3101013 or 12 Nut
М16х1,5-6Н.10.019 ГОСТ 5915-70
6 2 Tyre 360/70R24
7 40-3103017-01 16 Nut

Fig. No. Pos.


Designation Q-ty Description
No.
31.4 822-3101015 2 Wheel 11.2R24* (fitted with tyre) (1,2)
1 8133.3101012 2 Wheel W10x24
2 2 Tyre 11.2R24
3 40-3103017-01 16 Nut
* additional equipment

- 149 -
Fig. 31.5. Rear driving wheels. Rear wheel hubs

- 150 -
Group 31. Wheels and hubs
Subgroup 3104, 3107. Rear wheels. Rear wheel hubs

Fig. No. Pos. Number of the assembly unit


Q-ty Description
No. or part
31.5 70-3100220-А 2 Wheel 15.5R38 (fitted with tyre) (4, 8)
4 С70-3107012 2 Wheel DW14Lх38 (disk, rim, protective visor)
8 2 Tyre 15.5R38

72-3107010* 2 Wheel 16.9R38 (fitted with tyre) (4, 8)


DW15Lx38-3107020 or
4 2 Wheel DW15Lx38 (disk, rim, protective visor)
8746.3107012П3
8 2 Tyre 16.9R38

72-3107010-05* 2 Wheel 16.9R38 (fitted with tyre) (4, 8)


4 С70-3107012 2 Wheel DW14Lх38 (disk, rim, protective visor)
8 2 Tyre 16.9R38

80-3107010 2 Wheel 18.4R34 (fitted with tyre) (4, 8)


4 С885.3107012 2 Wheel DW16х34 (disk, rim, protective visor)
8 2 Tyre 18.4R34 (model Ф-11)

50-3100030 2 Wheel 9.5-42 (fitted with tyre) (4, 8)


4 50-3107050 2 Wheel DW8x42 (disk and rim)
8 2 Tyre 9.5-42

85-3107020 2 Wheel (fitted with tyre) (4, 8)


4 50-3107050 2 Wheel DW8x42 (disk and rim)
8 2 Tyre 11.2R42

50-3100160 2 Wheel (fitted with tyre) (4, 8)


4 С50-3107020 2 Wheel DW14x30 (disk, rim, protective visor)
Tyre 18.4R30 or
8 2
18.4/78-30

50-3104010-А1 2 Rear wheel hub (1-3, 9, 10, 12-14)


1 70-3104025 2 Bushing
2 50-3104015 2 Hub
3 40-3104021 16 Bolt
5 М16-6Н.6.019 ГОСТ 5915-70 8 Nut
6 16 ОТ ОСТ 37.001.115-75 8 Washer
7 50-3107018-А 4 Weight (optional)
9 70-3104019 2 Special (auxiliary) nut
10 36-3104019 14 Nut
11 7-34-108 8 Bolt
12 50-3104028 8 Bolt
13 27 Л ОСТ 37.001.115-75 8 Washer
14 50-3104029 8 Spherical washer
15 50-3104016 2 Key
* with ballast weight

- 151 -
Variant

Fig. 34.1. Steering column

- 152 -
Group 34. Steering
Subgroup 3401. Steering column

Fig. No. Pos.


Designation Q-ty Description
No.
34.1 Steering column
85-3401010 1
(1-21, 32-37, 39, 40, 42, 44, 45)
70-3401050-Б 1 Shaft (15-17)
85-3401150 1 Cardan joint (5-9, 12, 36, 37)
1 85-3401120 1 Bracket
2 85-3401016 1 Bush
3 С20 ГОСТ 13940-86 1 Ring
4 80-3401019 1 Washer
5 85-3401156-Б 1 Fork
6 С19 ГОСТ 13943-86 8 Ring
7 904700 УС17 ТУ 37.006.065-90 8 Bearing
8 50-3401064 8 Gland
9 50-3401063 8 Fixture
10 М10-6Н.04.019 ГОСТ 5916-70 1 Nut
11 80-3401013 2 Washer
12 50-3401061-A 1 Fork
13 М10-6gх45.88.35.019 ГОСТ 7795-70 1 Bolt
14 СШ-510 1 Key 5х10
15 70-3401055 1 Intermediate shaft
16 70-3401054-Б 1 Shank
17 ШЦК 8х36 1 Pin
18 70-3401077-Б 2 Shock-absorber
19 70-3401076 2 Bush
20 70-3401078 1 Nut
21 70-3401079 1 Locknut
22 80-3401082 1 Cover
23 80-3401140 1 Clamp
24 М16х1,5-6Н.6.019 ГОСТ 5915-70 1 Nut
25 50-3401091 1 Washer
26 80-3402015 1 Steering wheel
27 80-3709025 1 Bush
28 80-3709026-Б 1 Bush
29 80-3709024 1 Boot
30 50-4608057 1 Spring
31 85-3401175 1 Shaft
32 600-3401012 1 Washer
33 70-3003032 2 Nut
34 8х28.01.019 ГОСТ 10299-80 2 Rivet
35 600-3401160 1 Sector
36 50-3401062 2 Cross
37 85-3401067 1 Fork
38 70-3709012-A 1 Handle
39 4х25.019 ГОСТ 397-79 2 Cotter pin
40 85-3401011 2 Screw
41 80-3401001 1 Rod
42 50-1310158-Б 1 Spring
43 1,6х12.019 ГОСТ 397-79 1 Cotter pin
44 С18 ГОСТ 13940-86 1 Ring
45 85-3401014 1 Catch
46 822-3401140-А1 1 Clamp
47 16 ОТ ОСТ 37.001.115-75 1 Washer
48 70-3402015-А 1 Steering wheel

- 153 -
Fig. 34.2. Steering fittings

- 154 -
Group 34. Steering
Subgroup 3407. Steering fittings

Fig. No. Pos.


Designation Q-ty Description
No.
34.2 1 “NORMA” TORRO 16-25/9-C6W 2 Clamp
2 85-3407332 1 Connecting hose
3 1021-4802062 1 Hose pipe
4 80-4801200-Б 1 Lock-up cock
5 Д18-055-А-01 6 Washer
6 Д18-051 3 Bolt
7 Ф80-3407720 3 Oil pipeline
8 950-480262-01 1 Hose
9 “NORMA” TORRO 12-20/9-C6W 4 Clamp
OSPC100 ON 150-1155
or Metering pump
10 SUB100-140.200-1 or 1 (in case of installation of the FDA with
LAGC100-10/200-140М01-100S or bevel gear speed reducers)
Д100-14.20-02
OSPC 160 ON 150G030 or Metering pump (in case of installation of
10а LAGC160-10/200-140М01-100S or 1 the FDA with planetary-cylindrical gear
SUB 160.140-200-1 or Д100-14.20-02 speed reducers Ц63)
11 Ф80-3407157 5 Washer
12 Ф80-3407134 3 Connecting pipe
13 680-4607140-05 2 High-pressure hose pipe
14 890-3407131 1 Bracket
15 70-3506027 5 Bush
16 70-6804011 1 Holder
17 8Т ОСТ 37.001.115-75 16 Washer
18 М8-6gх20.88.35.019 ГОСТ 7796-70 1 Bolt
19 М8-6gх30.88.35.019 ГОСТ 7796-70 5 Bolt
20 900-3407030 1 Oil pipeline
21 70-3407146 3 Slat
22 900-3407040 1 Oil pipeline
23 952-3407013 1 Bracket
24 70-4607158 3 Gasket
25 952-3407100 1 High-pressure hose pipe
25а 952-3407100-04 1 High-pressure hose pipe
26 102-3407010 1 Bracket
27 М16-6gх40.88.35.019 ГОСТ 7796-70 2 Bolt
28 16 ОТ ОСТ 37.001.115-75 2 Washer
29 50-4607041 1 Bracket
30 85-3407102 1 Bracket
31 1522В-3407100-06 1 High-pressure hose pipe
32 Ф80-3407760 1 Oil pipeline
33 “NORMA” TORRO 20-32/9-C6W 2 Clamp
34 952-3407014 1 Hose
35 10 ОТ ОСТ 37.001.115-75 1 Washer
36 М10-6gх25.88.35.019 ГОСТ 7796-70 1 Bolt
37 Ф80-3407510 1 Oil pipeline
38 017-022-30-1-4 ГОСТ 18829-73/9833- 2 Ring
73
40 М8-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
41 952-3407050 1 Connecting pipe
42 021-025-25-1-4 ГОСТ 18829-73/9833-73 1 Ring
43 М8-6gх25.88.35.019 ГОСТ 7796-70 8 Bolt
44 85-3407101 2 Branch pipe

- 155 -
Fig. 34.2. Steering fittings

- 156 -
Group 34. Steering
Subgroup 3407. Steering fittings

Fig. No. Pos.


Designation Q-ty Description
No.
34.2 45 70-4608033 2 Gasket
46 Н036.83.140 1 High-pressure hose pipe
47 530-4614029 2 Angle piece
48 40-4607038-А-01 4 Washer
49 40-4607032 2 Bolt
50 1221-3407090 1 Oil pipeline
51 70-4802040 1 Oil pipeline
52 600-3407080-01 1 Oil pipeline
53 85-3407105-02 1 Bolt
54 ДАДМ-03М 1 Sensor
55 40-4607037 1 Bolt
56 40-4607033-А-01 2 Washer
НШ10Ж-ЗЛ or
57 1 Gear pump
НШ10Г-3Л

- 157 -
Fig. 34.3. HPS hydraulic cylinder and fittings (version with front axles)

- 158 -
Group 34. Steering
Subgroup 3405, 3407. HPS hydraulic cylinder and fittings
(version with front axles)
Fig. No. Pos.
Designation Q-ty Description
No.
34.3 1 70-3001040 1 Lever right
2 952-3407100 1 High-pressure hose pipe
3 1220-3003010 1 Link assembly
4 50-3001087 2 Nut
5 27 Л ОСТ 37.001.115-75 2 Washer
6 70-3001040-01 1 Lever left
7 4х36.019 ГОСТ 397-79 2 Cotter pin
8 М20х1,5-6Н.6.019 ГОСТ 5915-70 2 Nut
9 Ф80-3405101Б 2 Pin
10 Ф80-3405108 4 Seal cup
11 Ф80-3405109 4 Joint seal
12 Ф80-3405107 4 Spherical bush
13 Ц50-3405215-А 1 Hydraulic cylinder Ц50х25-200
14 Ф80-3405102В 2 Bush
15 С 20.01.019 ГОСТ 11371-78 2 Washer
16 Ф80-3405103 2 Washer
17 1.1.Ц9.хр ГОСТ 19853-74 2 Greaser
18 М20-6Н.6.019 ГОСТ 5915-70 2 Nut
19 Ф80-3407201 2 Bolt
20 Ф80-3407114 4 Washer
21 952-3407020 2 Adapter
22 Ф80-3001011 1 Bracket
23 Ф80-3001013 2 Plate
24 М16-6gх40.88.35.019 ГОСТ 7796-70 4 Bolt
25 Д01-015 2 Pin
26 50-3001010А-01 1 Front axle
27 Ф80-3405112 1 Reducing sleeve
28 952-3407100-04 1 High-pressure hose pipe

- 159 -
Fig. 34.4. HPS hydraulic cylinder and fittings (FDA 72-2300020-A-04)
- 160 -
Group 34. Steering
Subgroup 3405, 3407. HPS hydraulic cylinder and fittings (FDA 72-2300020-A-04)

Fig. No. Pos.


Designation Q-ty Description
No.
34.4 1 102-3405103 1 Pin
2 Ф80-3405108 4 Sealing cup
3 Ф80-3405109 4 Joint seal
4 Ф80-3405107 4 Spherical bush
5 Ф80-3405102-В 2 Bush
6 С 20.01.019 ГОСТ 11371-78 3 Washer
7 Ф80-3405103 2 Retaining washer
8 М20х1,5-6Н.6.019 ГОСТ 5915-70 2 Nut
9 1.1.Ц9.хр ГОСТ 19853-74 2 Greaser
10 952-3407100 2 High-pressure hose pipe
11 Ф80-3407201 2 Bolt
12 Ф80-3407114 4 Washer
13 952-3407020 2 Adapter
14 Ц50-3405215-А-01 1 Hydraulic cylinder 50x25-200
15 102-3405103-Б 1 Pin
16 72-2308075-01 1 Lever left
17 1220-3003010 1 Steering link
18 М16-6gх40.88.35.019 ГОСТ 7796-70 3 Bolt
19 16 ОТ ОСТ 37.001.115-75 3 Washer
20 Д01-015 2 Pin
21 102-2301023-01 1 Bracket
22 4х36.019 ГОСТ 397-79 2 Cotter pin
23 70-4605316 2 Nut
24 72-2300020-А-04 1 Front driving axle
25 72-2308074 1 Lever right

- 161 -
Fig. 34.5. Hydraulic cylinder 50x25-200

- 162 -
Group 34. Steering
Subgroup 3405. Hydraulic cylinder 50x25-200

Fig. No. Pos.


Designation Q-ty Description
No.
34.5 Ц50-3405215-А* 1 Hydraulic cylinder 50x25-200 (2-18)
Ц50-3405215-А-01** 1 Hydraulic cylinder 50x25-200 (1, 3-18)
1 Ц50-3405220-01** 1 Cylinder body
2 Ц50-3405220* 1 Cylinder body
3 ШС-25 ГОСТ 3635-78 2 Bearing
4 С42 ГОСТ 13941-86 4 Ring
5 Ц50-3405218-Б 1 Front cover
6 045-050-30-1-4 ГОСТ 18829-73/9833-73 2 Ring
7 Ц50-3405223-Б 1 Piston
8 Ц50-3405222 1 Piston nut
9 24251797 1 Piston seal L43 50-34-20,5
10 025-028-19-1-4 ГОСТ 18829-73/9833-73 1 Ring
11 Ц50-3405228 1 Protective ring
12 24223269 1 Rod seal Т20 25-33-5.7
13 24004792 1 Rod cuff PU6 25-33,6-6,5
14 А.М8-6gх10.45Н.40Х.05 ГОСТ 8878-93 1 Screw
15 Ц50-3405224 1 Sleeve nut
16 Ц50-3405221-Б 1 Rod
17 24223123 1 Rod seal OMS-MR 25-32,3-3
18 24226044 2 Rod guide SB 25-28-5,5
* for tractors with front axle
** for tractors with FDA 72-2300010

- 163 -
Fig. 34.6. Hydraulic cylinder Ц63 and HPS fittings (FDA 822-2300020-02/-04)

- 164 -
Group 34. Steering
Subgroup 3405, 3407. Hydraulic cylinder Ц63 and HPS fittings
(FDA 822-2300020-02/-04)
Fig. No. Pos.
Designation Q-ty Description
No.
34.6 1 Ф80-3407201 2 Bolt
2,3 Ф80-3407114 4 Washer
4 1.1.Ц9.хр ГОСТ 19853-74 2 Greaser
5 М20х1,5-6Н.6.019 ГОСТ 5915-70 2 Nut
6 Ф80-3405103 2 Retaining washer
7 С 20.01.019 ГОСТ 11371-78 2 Washer
8 Ц63-3405115-А-02 1 Hydraulic cylinder
9 102-3405111 1 Pin
9а М16-6Н.6.019 ГОСТ 5915-70 3 Nut
9б 16 ОТ ОСТ 37.001.115-75 3 Washer
9в 1520-2308077 3 Bush
9г 1520-2308079 3 Pin
10 952-3407100-04 2 High-pressure hose pipe
11 822-2301023-Б-01 1 Cylinder bracket
12 4х36.019 ГОСТ 397-79 2 Cotter pin
13 102-3405113 2 Pin nut
14 1021-2308076 1 Bracket
15 822-2300020-04 1 FDA (with cylinder Ц63)
16 102-3405112-01 1 Pin
17 952-3407020 2 Adapter
18 Д01-015 2 Pin
19 1220-3003010 1 Steering link

- 165 -
Fig. 34.7. Hydraulic cylinder Ц63 (63x30-200)

- 166 -
Group 34. Steering
Subgroup 3405. Hydraulic cylinder Ц63 (63x30-200)

Fig. No. Pos.


Designation Q-ty Description
No.
34.7 Ц63-3405115-А-02 1 Hydraulic cylinder assembly
1 В.М5-6gх10.58.019 ГОСТ 17473-80 16 Screw
2 82.6-4713337 4 Fit ring
3 Ц63-3405134 4 Boot
4 Ц63-3405127 4 Bush
5 С47 ГОСТ 13941-86 4 Ring
6 ШС-30 ГОСТ 3635-78 2 Bearing
7 24004799 1 Rod cuff PU6 30-38,6-6,5
8 24236861 1 Rod seal Т20 30-38-5.7
9 Ц63-3405118-Б 1 Front cover
10 Ц63-3405120-02 1 Casing
11 Ц50-3405222 1 Piston nut
12 24251803 1 Piston seal L43 63-47-20,5
13 Ц63-3405123 1 Piston
14 030-034-25-1-4 ГОСТ 18829-73/9833-73 1 Ring
15 055-063-46-1-4 ГОСТ 18829-73/9833-73 2 Ring
16 Ц63-3405128 or 1 Protective ring
82.6-4713327
17 Ц63-3405121 1 Rod
18 Ц63-3405124 1 Sleeve nut
19 А.М8-6gх10.45Н.40Х.05 ГОСТ 8878-93 1 Screw
20 24223129 1 Rod seal OMS-MR 30-37,3-3
21 24226046 2 Rod guide SB 30-33-5,5

- 167 -
Fig.34.8. Steering with the FDA 822-2300020-04 and separate tank
- 168 -
Group 34. Steering
Subgroup 3407. Steering with the FDA 822-2300020-04
and separate tank
Fig. No. Pos.
Designation Q-ty Description
No.
34.8 1 16 ОТ ОСТ 37.001.115-75 2 Washer
2 М16-6gх25.88.35.019 ГОСТ 7796-70 2 Bolt
3 1221-3407012-03 1 Hose
4 “NORMA” TORRO 25-40/9-C6W 2 Clamp
5 М8-6gх40.88.35.019 ГОСТ 7795-70 2 Bolt
6 8Т ОСТ 37.001.115-75 13 Washer
7 1025-3407030 1 Oil pipeline
8 017-022-30-1-4 ГОСТ 18829-73/9833-73 2 Ring
9 М8-6gх35.88.35.019 ГОСТ 7796-70 9 Bolt
10 1025-3407020 1 Oil pipeline
11 “NORMA” TORRO 16-25/9-C6W 4 Clamp
12 952-3407014-06 1 Hose
13 85-3407105-03 1 Bolt
14 Ф80-3407157 2 Washer
15 922-3407080 1 Oil pipeline
16 2522-6703034 1 Gasket
17 1522-3407011 1 Cover
18 6Т ОСТ 37.001.115-75 4 Washer
19 М6-6gх16.88.35.019 ГОСТ 7798-70 4 Bolt
20 680-4607140-06 1 High-pressure hose pipe
21 680-4607140-05 1 High-pressure hose pipe
22 1522-3407016 3 Connecting pipe
23 025-029-25-2-2 ГОСТ 18829-73/9833-73 3 Ring
24 70-3506027 9 Bush
25 1025-3407012 1 Bracket
26 703407146 6 Slat
27 OSPC 160-ON150G0030 or LAGC 1 Metering pump
160-10/200-140 M01-100S
or SUB 160-140.200-1
28 1025-3407040 2 Oil pipeline
29 1025-3407060 1 Oil pipeline
30 М8-6gх20.88.35.019 ГОСТ 7796-70 3 Bolt
31 1025-3407013 2 Bracket
32 923-3407050 1 T-branch
33 600-3407083 1 Hose
34 Ф80-3407111-01 1 Valve cover
35 12,0-60 ГОСТ 3722-81 1 Ball
36 923-3407100-01 1 Tank
37 НШ14Д-3Л or 1 Gear pump
НШ14Г-3Л or
20А14х126
38 952-3407100-02 2 High-pressure hose pipe
39 952-3407100-04 2 High-pressure hose pipe
40 40-4607033-А 2 Washer
41 1221-3407140-01 1 Valve
41а ДАДМ-03 1 Oil emergency pressure sensor
42 Ф80-3407113 1 Guide
43 80-3407221 1 Spring
44 Ф80-3407114 5 Washer
45 822-3407095 1 Valve body
46 40-4607032 1 Bolt
47 40-4607038-А 2 Washer

- 169 -
Fig.34.8. Steering with the FDA 822-2300020-04 and separate tank
- 170 -
Group 34. Steering
Subgroup 3407. Steering with the FDA 822-2300020-04
and separate tank

Fig. No. Pos.


Designation Q-ty Description
No.
34.8 48 4х36.019 ГОСТ 397-79 2 Cotter pin
49 102-3405113 2 Pin nut
50 102-3405112-01 1 Pin
51 Ф80-3407301 2 Bolt
52 2022-3407202 2 Adapter
53 С 20.01.019 ГОСТ 11371-78 2 Washer
54 Ф80-3405103 2 Retaining washer
55 М20х1,5-6Н.04.019 ГОСТ 15522-70 2 Nut
56 1.1.Ц9.хр ГОСТ 19853-74 2 Greaser
57 Ц63-3405115-А-02 1 Hydraulic cylinder
58 102-3405111 1 Pin

- 171 -
Fig.34.9. Tank

- 172 -
Group 34. Steering
Subgroup 3407. Tank

Fig. No. Pos.


Designation Q-ty Description
No.
34.9 923-3407100-01 1 Tank (1-21)
1 50-4608027-В 1 Plug
2 017-021-25-2-2 ГОСТ 18829-73/9833-73 1 Ring
3 923-3407120-01 1 Tank
4 А61-С06-А3 1 Filter
5 240-3707200 1 Plug
6 082-4608130 1 Oil gauge
7 011-015-25-2-4 ГОСТ 18829-73/9833-73 2 Ring
8 М6-6gх16.88.35.019 ГОСТ 7798-70 2 Bolt
9 М6-6gх25.88.35.019 ГОСТ 7798-70 4 Bolt
10 6Т ОСТ 37.001.115-75 4 Washer
11 220-4608051-01 1 Cover
12 50-4608057 1 Spring
13 1,6х12.019 ГОСТ 397-79 1 Cotter pin
14 320-4608081 2 Bolster
15 80-3405044 1 Spring
16 320-4608085 1 Valve body
17 320-4608083 1 Spherical valve
18 320-4608082 1 Rod
19 80-4608024 2 Ring
20 601T-1-06 1 Filtering element
21 075-080-30-1-4 ГОСТ 18829-73/9833-73 2 Ring
22 220-4608060 1 Cage

- 173 -
Fig. 35.1. Brakes. Brake control (dry friction)

- 174 -
Group 35. Brakes
Subgroup 3502, 3503. Brakes. Brake control (dry friction)

Pos.
Fig. No. Number of the assembly unit or part Q-ty Description
No.
35.1 85-3502010 2 Brake (1-11,36,37)
85-3502030 2 Pressure plate (3-11)
70-3503080 2 Rod brakes (16,19, 20)
80-3503080 1 Right pedal (32, 33)
80-3503090 1 Left pedal (30, 31)
1 85-3502035 2 Housing
85-3502040-01 or
2 4 Brake disk
85-3502040-04
3 85-3502036 4 Pressure plate
4 77.38.163 6 Spring
5 22,225-100 ГОСТ 3722-81 10 Ball
6 М8-6Н.6.019 ГОСТ 5915-70 4 Nut
7 85-3502196 4 Rod
8 3,2х18.019 ГОСТ 397-79 2 Cotter pin
9 50-3502203 2 Fork
10 12х32 ОСТ 37.001.163-75 2 Pin
11 50-3502198 4 Pin
12 12 ОТ ОСТ 37.001.115-75 4 Washer
13 2.2-25x42-1 2 Cuff
14 50-3503071 3 Washer
15 М12-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
16 М12х1,25-6Н.04.019 ГОСТ 5916-70 2 Nut
17 СШ-611 2 Key 6x11
18 70-3503017-A 1 Lever
19 70-3503019 2 Bolt
20 70-3503018 2 Washer
21 5х36.019 ГОСТ 397-79 2 Cotter pin
22 50-3503015 1 Roller
27 50-1605152 2 Spring
28 80-3503110 1 Lever
29 80-3503120 1 Lever
30 A13.34.001 1 Liner
31 80-3503140 1 Left pedal
32 80-3503130 1 Right pedal
33 A13.33.002 1 Liner
34 80-3503158-A 2 Seal
35 М12-6gх30.88.35.019 ГОСТ 7796-70 2 Bolt
36 50-3502202 2 Boot
37 1,6-О-С ГОСТ 3282-74 2 Wire

- 175 -
Fig. 35.2. Brakes (design version)

- 176 -
Group 35. Brakes
Subgroup 3502. Brakes (design version)

Pos.
Fig. No. Number of the assembly unit or part Q-ty Description
No.
35.2 1522-3502010 2 Brake (1-8, 12-17)
70-3503080 2 Rod brakes (9,10,11)
85-3502030 2 Pressure plate (3-8,12-14)
1 1522-3502035 2 Housing
85-3502040-01 or
2 6 Disk
85-3502040-04
3 85-3502036 4 Pressure plate
4 77.38.163 6 Spring
5 50-3502198 4 Pin
6 85-3502196 4 Rod
7 50-3502203 2 Fork
8 12х32 ОСТ 37.001.163-75 2 Pin
9 М12х1,25-6Н.04.019 ГОСТ 5916-70 2 Nut
10 70-3503018 2 Washer
11 70-3503019 2 Bolt
12 3,2х18.019 ГОСТ 397-79 2 Cotter pin
13 М8-6Н.6.019 ГОСТ 5915-70 4 Nut
14 22,225-100 ГОСТ 3722-81 10 Ball
15 1522-3502037-Б 2 Disk
16 1,6-О-С ГОСТ 3282-74 300 mm 2 Wire
17 50-3502202 2 Boot

- 177 -
Right brake

Left brake

Fig.35.3. Wet brakes (left/right)

- 178 -
Group 35.Brakes
Subgroup 3502. Wet brakes (left/right)

Fig. No. Pos. Number of the assembly unit or part Q-ty Description
No.
35.3 1221М-3502010 1 Brake right (2-14, 16-20, 22, 23)
1221М-3502020 1 Brake left (1-20)
85-3502030-01 2 Pressure plate (2, 3, 4, 7, 11, 14, 17-19)
1 1221М-2409035 1 Casing
2 М8-6Н.6.019 ГОСТ 5915-70 4 Nut
3 50-3502198 4 Pin
4 85-3502196 4 Rod
5 1522-3502015-07 16 Disk
6 80М-3502037 12 Intermediate disk (S=3.0 mm)
80М-3502037-01 * Intermediate disk (S=3.2 mm)
80М-3502037-02 * Intermediate disk (S=3.4 mm)
80М-3502037-03 * Intermediate disk (S=3.6 mm)
80М-3502037-04 * Intermediate disk (S=3.8 mm)
80М-3502037-05 * Intermediate disk (S=4.0 mm)
80М-3502037-06 * Intermediate disk (S=4.2 mm)
80М-3502037-07 * Intermediate disk (S=4.4 mm)
7 12х32 ОСТ 37.001.163-75 2 Pin
8 М6-6gx12.88.35.019 ГОСТ 7798-70 8 Bolt
9 6Т ОСТ 37.001.115-75 8 Washer
10 80М-3502202 2 Boot
11 50-3502203 2 Fork
12 80М-3502204 2 Plate
13 1221М-3502051 2 Gasket
14 3,2х18.019 ГОСТ 397-79 2 Cotter pin
15 85М-2407059 1 Cage cover (left)
16 Ц-110-1414045 2 Ring
17 22,225-100 ГОСТ 3722-81 10 Ball
18 85-3502036-01 4 Pressure plate
19 77.38.163 6 Spring
20 В.М8-6gх25.58.019 ГОСТ 17475-80 6 Screw
21 ПК КГ3/8” 4 Plug
22 1221М-3502035 1 Casing
23 85М-2407059-01 1 Cage cover (right)
24 1221-1802091 2 Plug
25 Д18-055-А 2 Seal ring
* To be selected for ensuring the necessary gap during the assembling

- 179 -
Fig. 35.4. Brakes. “Wet” brake control

- 180 -
Group 35. Brakes
Subgroup 3503. Brakes. “Wet” brake control

Fig. Pos.
Number of the assembly unit or part Q-ty Description
No. No.
35.4 70-3503080 3 Rod (1-3)
1 М12х1,25-6Н.04.019 ГОСТ 5916-70 2 Nut
2 70-3503018 2 Washer
3 70-3503019 2 Bolt
4 50-1605152 2 Spring
5 80-3503158-А 2 Seal
6 М12-6gх30.88.35.019 ГОСТ 7796-70 2 Bolt
7 12 ОТ ОСТ 37.001.115-75 4 Washer
1221М-3503015*
8 1 Roller
1221М-3503015-01**
9 М12-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
10 1221М-3503016-01 2 Bush
11 70-3503017-А 1 Lever
12 СШ-611 2 Key 6х11
13 50-3503071 4 Washer
14 80-3503120 1 Lever
15 80-3503140 1 Left pedal
16 80-3503130 1 Right pedal
17 80М-3503110 1 Lever
18 1221М-3503016 1 Bush
21 5х36.019 ГОСТ 397-79 2 Cotter pin
* In case of installation of hydraulic control of the PTO
** In case of installation of mechanical control of the PTO

- 181 -
Fig. 35.5. Parking brake. Parking brake control

- 182 -
Group 35. Brakes
Subgroup 3504, 3507. Parking brake. Parking brake control

Fig. No. Pos.


Designation Q-ty Description
No.
35.5 50-3502010 1 Brake (2-4, 6-14, 43, 44)
50-3502030-А 1 Pressure plate (4, 6-11, 43, 44)
70-3503080 1 Rod brakes (15, 17, 18)
85-3507120-01 1 Lever (19-23, 29-32)
900-3507140*
1 Rod (9, 15, 38)
80-3507240**
85-3507150-02 1 Bracket (16, 24-27, 39-41)
М12-6gх180.58.019 ГОСТ 7795-70*
1 3 Bolt
М12-6gх200.58.019 ГОСТ 7795-70**
2 50-3502035 1 Housing
70-3502040-01 or
3 2 Disk
70-3502040-04
4 50-3502036-Б 2 Pressure plate
70-3504055*
5 1 Shaft
70-3504055-01**
6 М8-6Н.6.019 ГОСТ 5915-70 2 Nut
7 50-3502196 2 Rod
8 3,2х18.019 ГОСТ 397-79 3 Cotter pin
9 50-3502203 2 Fork
10 12х32 ОСТ 37.001.163-75 3 Pin
11 50-3502198 2 Pin
12 1,6-О-С ГОСТ 3282-74 1 Wire 300 mm
13 50-3502202 1 Boot
14 36-1702358 1 Spring ring
15 М12х1,25-6Н.6.019 ГОСТ 5915-70 3 Nut
16 70-3503017-А 1 Lever
17 70-3503018 1 Washer
18 70-3503019 1 Bolt
19 70-3507122-01 1 Rod
20 С 5.01.019 ГОСТ 11371-78 1 Washer
21 55-17-27 1 Spring
22 А13.19.002 1 Button
23 А13.19.001-А 1 Handle
24 М12-6gх40.88.35.019 ГОСТ 7796-70 1 Bolt
25 12 ОТ ОСТ 37.001.115-75 7 Washer
70-3514107*
26 1 Lever
80-3514107**
27 СШ-611 1 Key
28 С15 ГОСТ 13940-86 1 Ring
29 85-3507130-01 1 Lever
30 50-1606026 1 Latch
31 2х12.019 ГОСТ 397-79 1 Cotter pin
32 70-3507024 1 Axle
33 70-3507021 –Б 1 Sector
34 10 ОТ ОСТ 37.001.115-75 2 Washer
35 М10-6Н.6.019 ГОСТ 5915-70 2 Nut
36 М10-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
37 70-3507132-Б-01 1 Axle
900-3507141*
38 1 Rod
80-3507241**
39 85-3507060 1 Lever
* In case of installation of twin-disk brakes
** In case of installation of three-disk brakes

- 183 -
Fig. 35.5. Parking brake. Parking brake control

- 184 -
Group 35. Brakes
Subgroup 3504, 3507. Parking brake. Parking brake control

Fig. No. Pos.


Designation Q-ty Description
No.
( )
35.5 80-4216050* ***
40 1 Hub
80-4216050-Б**(***)
1221-3507072**** 1 Bush
70-3507070***
41 1 Bracket
70-3507070-01****
М12-6gх200.58.019 ГОСТ 7795-70*
42 2 Bolt
1522-2409034-03**
43 77.38.163 3 Spring
44 22,225-100 ГОСТ 3722-81 3 Ball
* In case of installation of twin-disk brakes
** In case of installation of three-disk brakes
*** Mechanical control of the PTO
**** Hydraulic control of the PTO

- 185 -
Design version

Fig.35.6. Parking brake. Parking brake control (for wet brakes)

- 186 -
Group 35. Brakes
Subgroup 3504, 3507. Parking brake.
Parking brake control (for wet brakes)
Pos. Number of the assembly unit or
Fig. No. Q-ty Description
No. part
35.6 952М-3507140** 1 Rod (7, 8, 48)
85-3502030-01 1 Pressure plate (3-7, 29, 44, 46, 47)
952М-3507040* 1 Rod (30-34)
70-3503080 1 Rod brakes (8-10)
85-3507120-01 1 Lever (13-14,17-23)
1 1221М-3502039-01 5 Bolt
2 14 ОТ ОСТ 37.001.115-75 5 Washer
3 М8-6Н.6.019 ГОСТ 5915-70 2 Nut
4 50-3502198 2 Pin
5 85-3502196 2 Rod
6 12х32 ОСТ 37.001.163-75 2*/3** Pin
7 50-3502203 1*/2** Fork
8 М12х1,25-6Н.6.019 ГОСТ 5916-70 2*/3** Nut
9 70-3503018 1 Washer
10 70-3503019 1 Bolt
12 1221М-3507060 1 Lever
13 2х12.019 ГОСТ 397-79 1 Cotter pin
14 70-3507122-01 1 Rod
15 70-3507132-Б-01 1 Axle
16 С15 ГОСТ 13942-86 1 Ring
17 С 5.01.019 ГОСТ 6958-78 1 Washer
18 55-17-27 1 Spring
19 А13.19.002 1 Button
20 А13.19.001-А 1 Handle
21 85-3507130-01 1 Lever
22 50-1606026 1 Latch
23 70-3507024 1 Axle
24 М10-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
25 70-3507021-Б 1 Sector
26 10 ОТ ОСТ 37.001.115-75 2 Washer
27 М10-6Н.6.019 ГОСТ 5915-70 2 Nut
28 12 ОТ ОСТ 37.001.115-75 1 Washer
29 3,2х18.019 ГОСТ 397-79 3 Cotter pin
30 952М-3507041* 1 Rod
31 М12-6Н.6.019 ГОСТ 5915-70* 1 Nut
32 Р50-4616043* 1 Coupling
33 Р50-4616038* 1 Nut
34 952М-3507240* 1 Rod
35 1221М-3504055 1 Shaft
36 М6-6gх12.88.35.019 ГОСТ 7798-70 4 Bolt
37 6Т ОСТ 37.001.115-75 4 Washer
38 80М-3502202 1 Boot
39 80М-3502204 1 Plate
40 1221М-3502051 1 Gasket
41 50-1601352 2 Setting pin
80М-3502037 2 Intermediate disk (S=3.0 mm)
80М-3502037-01 *** Intermediate disk (S=3.2 mm)
80М-3502037-02 *** Intermediate disk (S=3.4 mm)
80М-3502037-03 *** Intermediate disk (S=3.6 mm)
42
80М-3502037-04 *** Intermediate disk (S=3.8 mm)
80М-3502037-05 *** Intermediate disk (S=4.0 mm)
80М-3502037-06 *** Intermediate disk (S=4.2 mm)
80М-3502037-07 *** Intermediate disk (S=4.4 mm)
* In case of installation of the two-lever gearbox
** In case of installation of the single-lever gearbox
*** To be selected for ensuring the necessary gap during the assembling
- 187 -
Design version

Fig.35.6. Parking brake. Parking brake control (for wet brakes)

- 188 -
Group 35. Brakes
Subgroup 3504, 3507. Parking brake.
Parking brake control (for wet brakes)

Pos. Number of the assembly


Fig. No. Q-ty Description
No. unit or part
35.6 43 1522-3502015-07 4 Disk
44 22,225-100 ГОСТ 3722-81 5 Ball
45 1221М-3502034 1 Cover
46 77.38.163 3 Spring
47 85-3502036-01 2 Pressure plate
48 952М-3507141** 1 Rod
* In case of installation of the two-lever gearbox
** In case of installation of the single-lever gearbox

- 189 -
Fig. 35.7. Pipelines and fittings of the single-line pneumatic actuator of the trailer brakes

- 190 -
Group 35. Brakes
Subgroup 3506. Pipelines and fittings for single-line pneumatic actuator of the trailer
brakes

Fig. No. Pos.


Number of the assembly unit or part Q-ty Description
No.
35.7 1021-3506020-01 1 Pipeline (2, 35-37)
80-3506455 1 Pipeline (31, 35-37)
80-3506220 1 Pipeline (19, 21, 22)
923-3506020** 1 Pipeline (25, 35-37)
А29.3514010 or
1 1 Brake valve
80-3514010
2 1021-3506021-01 1 Tube
3 5000.02 8 Clamp with worm thread 16-27
4 1522-3521012 1 Connecting pipe
А29.76.000 or
5 80-3521010 1 Connecting head
6 М10-6Н.6.019 ГОСТ 5915-70 2 Nut
7 10 ОТ ОСТ 37.001.115-75 2 Washer
8 70-3521012 1 Bracket
9 М10-6gх25.88.35.019 ГОСТ 7796-70 2 Bolt
10 70-1405013 2 Hose
11 70-3506027 2 Bush
12 М8-6gх16.88.35.019 ГОСТ 7796-70 1 (2*) Bolt
13 8Т ОСТ 37.001.115-75 2 (3*) Washer
14 70-6804011 2 Holder
15 80-3506041 1 Pipeline
16 М80-4607018 1 Bracket
17 М8-6gх20.88.35.019 ГОСТ 7796-70 1 Bolt
18 С 8.01.019 ГОСТ 11371-78 1 Washer
19 80-3506221 1 Pipeline
20 70-3513015 1 Angle piece
21 70-3506023 1 Sleeve nut
22 80-3506024 1 Coupling
23 70-3506022 1 Connecting pipe
24 80-3513050** 1 T-branch
25 923-3506021** 1 Tube
26 50-3513015-А** 1 Bottle
А29.51.000 Б or 1
27 80-3512010 Pressure control
1
28 80-3512006 1 Locknut
29 80-3513010 1 Bottle
30 80-3513025 1 T-branch
31 80-3506454 1 Tube
32 ДД10-01-Е 1 Air pressure sensor
33 ДАДВ 1 Emergency air pressure sensor
34 012-015-19-2-4 ГОСТ 18829-73/9833-73 4 (6**) Ring
35 1522-3506024 4 (6**) Coupling
36 1522-3506023 4 (6**) Sleeve nut
37 1522-3506022 4 (6**) Nipple
38 1522-3514033** 1 Angle piece
39 80-3723045-01 2 Cuff
40 70-4802046* 1 Clamp
* “Wet” brakes.
** Optionally.

- 191 -
Version for EURO-2

Fig. 35.8. Pipelines and fittings of the two-line pneumatic actuator of the trailer brakes

- 192 -
Group 35. Brakes
Subgroup 3506. Pipelines and fittings of the two-line pneumatic actuator of the trailer
brakes
Fig. No. Pos.
Number of the assembly unit or part Q-ty Description
No.
35.8 1025-3506560-01 1 Pipeline (5, 44-46)
1025-3506560-02 1 Pipeline (16, 44-46)
80-3506220 1 Pipeline (27, 28, 33)
1021-350602-06 1 Pipeline (41, 44-46)
1025-3506540 1 Pipeline (27, 28, 42)
А29.351.4010-02 or
1 1 Brake valve
80-3514010-02
2 М8-6gх16.88.35.019 ГОСТ 7796-70 1 (2*) Bolt
3 8Т ОСТ 37.001.115-75 2 (3*) Washer
4 70-4802046* 1 Clamp
5 1025-3506561-01 1 Tube
6 1522-3521513 2 Connecting pipe
7 64226-3521110 1 Connecting head
8 1025-3521511 1 Bracket
9 10 ОТ ОСТ 37.001.115-75 4 Washer
10 М10-6Н.6.019 ГОСТ 5915-70 4 Nut
11 М10-6gх25.88.35.019 ГОСТ 7796-70 2 Bolt
12 80-3723045-01 4 Cuff
13 64226-3521111 1 Connecting head
14 1025-3521512 1 Bracket
15 В.М8-6gх25.58.019 ГОСТ 17475-80 2 Screw
16 1025-3506561-02 1 Tube
17 80-3513025 1 T-branch
18 1025-3506620** 1 Pipeline
19 1025-3506610** 1 Pipeline
20 70-3506027 3 (1**) Bush
21 70-6804011 1 Holder
22 40-4607038А** 2 Washer
23 1025-3506623** 1 Nut
24 1025-3506622** 1 Connecting pipe
25 5000.04 2 Clamp with worm thread 25-40
26 1025-3506624 1 Hose
27 70-3506023 2 (1**) Nut
28 80-3506024 1 Coupling
29 70-3506022 1 Connecting pipe
30 70-3513015 1 Angle piece
31 5000.02 4 Clamp with worm thread 16-27
32 А29.01.000 or А29.05.000-В 1 Compressor
33 80-3506221 1 Pipeline
34 М8-6gх30.88.35.019 ГОСТ 7796-70 1 Bolt
35 70-3407146 1 Slat
36 70-3407144 1 Threaded slat
37 70-1405013 4 Hose
38 80-3506041 1 Pipeline
39 А29.51.000 Б or 80-3512010 1 Pressure control
40 80-3513010 1 Bottle
41 1021-3506021-06 1 Tube
42 1025-3506550 1 Pipeline
43 012-015-19-2-4 ГОСТ 18829-73/9833-73 6 Ring
44 1522-3506022 6 Nipple
45 1522-3506024 6 Coupling
46 1522-3506023 6 Sleeve nut
47 014-017-19-2-4 ГОСТ 18829-73/9833-73 1 Ring
48 70-3506028 1 Coupling
* “Wet” brakes
** Version for EURO-2
- 193 -
Fig. 35.9. Bottle

Fig. 35.10. Brake valve (for single-line pneumatic actuator)

- 194 -
Group 35. Brakes
Subgroup 3513. Bottle

Fig. No. Pos.


Number of the assembly unit or part Q-ty Description
No.
35.9 1 85-3513010 1 Bottle
2 80-3513025 1 T-branch
3 В50-3513032 2 (4*) Clamp
4 М16-6gх32.88.35.019 ГОСТ 7796-70 4 (8*) Bolt
5 80-3513040 1 (2*) Bracket
6 16 ОТ ОСТ 37.001.115-75 4 (8*) Washer
7 С 16.01.019 ГОСТ 11371-78 1 (2*) Washer
8 6Т ОСТ 37.001.115-75 2 (4*) Washer
9 М6-6Н.6.019 ГОСТ 5915-70 2 (4*) Nut
10 В50-3513025-А 1 (2*) Bracket
11 ПР-43-01 4 (8*) Seal
12 В50-3522023 1 (2*) Gasket
13 85-3513110 1 (2*) Valve
14 H50-4202146 1 (2*) Ring
* Optionally

Group 35. Brakes


Subgroup 3514. Brake valve (for single-line pneumatic actuator)

Fig. No. Pos.


Number of the assembly unit or part Q-ty Description
No.
35.10 1 1522-3514033 2 (1***) Angle piece
2 70-3506033 1*** Angle piece
3 10 ОТ ОСТ 37.001.115-75 4 Washer
4 М10-6gх40.88.35.019 ГОСТ 7796-70 2 Bolt
5 80-3514109 1 Bracket
80М-3514109** 1 Bracket
6 М10-6gх70.88.35.019 ГОСТ 7795-70 2 Bolt
7 3,2х18.019 ГОСТ 397-79 2 Cotter pin
8 С 8.01.019 ГОСТ 11371-78 1 Washer
9 80-3514130 1 Rod
10 А29.3514010 or
1 Brake valve
80-3514010
А29.351.4010-01* or
1 Brake valve
80-3514010-01*
А29.3514010-02*** or
1 Brake valve
80-3514010-02***
11 12х48 ОСТ 37.001.163-75 1 Pin
12 С 12.01.019 ГОСТ 11371-78 2 Washer
*Optionally
** “Wet” brakes
*** For two-line pneumatic actuator

- 195 -
Fig.35.11. Compressor

- 196 -
Group 35. Brakes
Subgroup 3509. Compressor

Fig. No. Pos. Number of the assembly


Q-ty Description
No. unit or part
35.11 240-3509030-A 1 Pneumatic compressor assembly
1 А29.05.000-БЗА 1 Pneumatic compressor
2 М10-6gх45 1 Bolt
3 М10-6Н 3 Nut
4 10 65Г 06 3 Washer
5 36-1104788 3 Gasket
6 240-3509037-А 1 Gasket
7 240-3509150 1 Oil pipeline (L=352 mm)
8 36-1104787 1 Connecting pipe bolt
9 240-3509232 1 Connecting pipe
10 240-3509158 1 Clamp
11 240-3509159 1 Cramp
12 М6-6gх16 1 Bolt
13 М6-6Н 1 Nut
14 6 65Г 06 1 Washer
15 РД 18-29-300-1,3 1 Hose pipe piece
16 ХС-26.019 2 Binding screw clamp
17 80-3509010 * 1 Valve
18 920-3509020 ** 1 Angle piece
19 40-4607038-А ** 2 Washer
20 1025-3506623 ** 1 Nut
21 1025-3506622 ** 1 Connecting pipe
* The valve for inflating the tyres is installed in case of absence of the pneumatic actuator.
** In case of absence of the pneumatic actuator and air-conditioner compressor.

- 197 -
Fig. 35.12. Choke assembly (for tractors without pneumatic compressor)

- 198 -
Group 35. Brakes
Subgroup 3509. Choke assembly
(For tractors without pneumatic compressor)

Fig. No. Pos. Number of the assembly


Q-ty Description
No. unit or part
35.12 240-3509020 1 Choke assembly
1 240-3509037-А 1 Gasket
2 240-3509041 1 Cover
3 36-1104788 1 Gasket
4 М10-6Н.6.016(S16) 3 Nut
5 М10х20 1 Bolt
6 М10х30 3 Bolt
7 10 65Г 06 3 Washer

- 199 -
Fig. 37.1 Electric equipment for the engine

- 200 -
Group 37. Electric equipment
Subgroup 3709, 3710. Electric equipment for the engine

Fig. No. Pos.


Designation Q-ty Description
No.
37.1 Electric equipment for the engine as-
80-3700030-Г
sembly
1 80-3723045-01 21 Cuff
2 80-3724345-В* 1 Bundle
3 3844.10 1 Emergency temperature sensor
4 3845.10 1 Air cleaner clogging sensor
5 3828.10 1 Temperature indicator sensor
6 3722.40 1 Fuse box
7 80-3724368-Б 1 Wire
8 80-3747021 1 Bracket
9 80-3723016 1 Bracket
10 80-3724360-Ж 1 Bundle
11 В.М6-6gх20.58.019 ГОСТ 17473-80 2 Screw
12 М6-6Н.6.019 ГОСТ 5915-70 2/4* Nut
13 6Т ОСТ 37.001.115-75 2/4* Washer
14 822-3723044 1 Buckle
15 М8-6gх16.88.35.019 ГОСТ 7796-70 2 Bolt
16 8Т ОСТ 37.001.115-75 2 Washer
17 70-4802060 1 Bracket with nut
18 М6-6gх16.88.35.019 ГОСТ 7798-70* 2 Bolt
19 70-3723035* 2 Tip
20 3859.10* 1 Voltage transducer
21 3829.10 1 Sensor of oil pressure in the engine
22 80-3829002 1 Connecting pipe
23 3829.15 1 Oil emergency pressure sensor
24 ТМ-59-6000-38 1 Rubber tip
25 М2-14.13.238 2 Boot
26 3708.10 1 Starter 12 V, up to 3 kW
3708.15 1* Starter 24 V, up to 4 kW
27 М12-6gх45.88.35.019 ГОСТ 7796-70 1 Bolt
28 12 ОТ ОСТ 37.001.115-75 1 Washer
29 М12-6gх30.88.35.019 ГОСТ 7796-70 1 Bolt
* With the starting system rated at 24 V.

- 201 -
Fig. 37.2 Electric equipment for the engine (for Belarus-900.3/920.3/950.3/952.3 trac-
tors)
- 202 -
Group 37. Electric equipment
Subgroup 3709, 3710. Electric equipment for the engine
(For Belarus-900.3/920.3/950.3/952.3 tractors)
Fig. No. Pos.
Designation Q-ty Description
No.
37.2 920-3700030-Б Electric equipment of the engine
1 80В-3724310-02 1* Wire
2 822-3723044 1 Buckle
3 70-3723035 4*/2** Tip
4 80-3829002 1 Connecting pipe
5 80-3723045-01 17 Cuff
7 80-3747021 1 Bracket
8 50Л-3724050 2 Boot
9 М2-14-13.238 3 Boot
12 М8-6gх20.88.35.019 ГОСТ 7796-70 2 Bolt
14 М6-6gх20.88.35.019 ГОСТ 7798-70 3* Bolt
16 В.М6-6gх20.58.019 ГОСТ 17473-80 4 Screw
18 М6-6Н.6.019 ГОСТ 5915-70 5*/4** Nut
19 М8-6Н.6.019 ГОСТ 5915-70 2 Nut
20 М5-6Н.6.019 ГОСТ 5915-70 4 Nut
21 С 6.01.019 ГОСТ 6958-78 2 Washer
25 80-3724345-В 1* Bundle
26 920-3724360-Б 1 Bundle
27 80-3724380-А 1 Bundle
28 920-3724367 1* Wire
29 920-3724368-Б 1* Wire
30 80-3724381 1 Wire
31 80-3724368-Б 1 Wire
36 5Т ОСТ 37.001.115-75 4 Washer
37 6Т ОСТ 37.001.115-75 7 Washer
38 8Т ОСТ 37.001.115-75 2 Washer
41 3722.40 1 Fuse box
42 3829.15 2 Oil emergency pressure sensor
43 3844.10 1 Emergency temperature sensor
44 3829.10 1 Sensor of oil pressure in the engine
45 3845.10 1 Air cleaner clogging sensor
47 3828.10 1 Temperature indicator sensor
48 3747.35 1 Relay of the glow plugs
49 3721.10 1 Horn
50 3759.10 1* Voltage transducer
* With the starting system rated at 24 V
** With the starting system rated at 12 V

- 203 -
Fig. 37.3. Electric equipment for the transmission

- 204 -
Note to Fig. 37.3

Designation Remarks
80-3700040-Б Variant with pneumatic system
80-3700040-Б-01 Variant without pneumatic system

Group 37. Electric equipment


Subgroup 3700. Electric equipment for the transmission

Quantity per version


Fig. Pos. Number of the assembly unit
80-3700040-Б- Description
No. No. or part
- 01
37.3 Electric equipment for the
80-3700040-Б 1
transmission
Electric equipment for the
80-3700040-Б-01 1
transmission
1 70-1115012-03 1 1 Buckle
2 70-3506027 1 1 Bush
3 80-3723045-01 10 11 Cuff
4 80-3724317 1 1 Bundle
5 80-3724002-Б 1 Wire
6 305-ТВ-40-35 1 Tube (190 mm)
7 85-1702051 1 Washer
8 3829.25 1 Emergency air pressure
sensor
9 3829.20 1 Air pressure sensor
10 Д18-055-А 1 Seal ring
11 3843.10 2 2 Rotational speed sensor
12 М8-6gх25.88.35.019 ГОСТ 4 4 Bolt
7796-70
13 8Т ОСТ 37.001.115-75 4 4 Washer
14 80-3843001 10 10 Gasket
15 822-3723001 2 2 Cramp

- 205 -
Fig.37.4. Electric equipment for the cab

- 206 -
Group 37. Electric equipment
Subgroup 3700. Electric equipment for the cab

Fig. No. Pos.


Designation Q-ty Description
No.
37.4 1 70-3723042-01 5 Bush
2 80-3724351-Г1 1 Bundle
3 80-3723015 1 Chute
4 80-3723020 1 Chute
5 5205.10 1 Pantograph-type windscreen wiper
5а 5205.25 1 Brush with lever 660/600
6 С 6.01.019 ГОСТ 11371-78 5 Washer
7 В.М6-6gх12.58.019 ГОСТ 17474-80 9 Screw
8 80-3723010 1 Chute
9 8724.31.06 4 Working light
10 М8-6gх14.88.35.019 ГОСТ 7796-70 1 Bolt
11 8Т ОСТ 37.001.115-75 1 Washer
12 М8-6Н.6.019 ГОСТ 5915-70 1 Nut
13 80В-3724310-14 1 Wire
14 80-3801342 1 Shield
15 3710.40 1 Road train sign switch
16 80-3801327 2 Choke
17 80-3724035-Б 2 Wire
18 3714.10 1 Cab lighting lamp 105х95
19 3710.30 2 Working light switch
20 3709.15 1 Fan switch
21 3709.25 1 Windscreen wiper switch
22 4х10.01.019 ГОСТ 10621-80 1 Screw
23 11.3729 1 Additional resistor
24 80В-3724010 1 Bundle
25 5205.20 1 Windscreen wiper
25а 5205.30 1 Windscreen wiper lever 420
25б 5205.35 1 Windscreen wiper brush 460
26 80-5205031 1 Bracket
27 6Т ОСТ 37.001.115-75 5 Washer
28 М6-6gх16.88.35.019 ГОСТ 7798-70 2 Bolt
29 80-3724232-Б 1 Bundle
30 2-4х16.019 ГОСТ 1144-80 4 Wood screw
31 А37.10.031 4 Boss
32 85-3723041-01 4 Cramp
33 80-3724300-Г1 1 Bundle
35 М5-6Н.6.019 ГОСТ 5927-70 11 Nut
36 5Т ОСТ 37.001.115-75 11 Washer
37 80-3723038 3 Cramp
38 В.М5-6gх16.58.019 ГОСТ 17473-80 3 Screw
39 85-3710032 1 Lever
40 85-3710025 1 Nut
41 14 Л ГОСТ 6402-70 1 Washer
42 3720.10 1 Stop-light switch
43 3829.15 1 Oil emergency pressure sensor
44 1321-8700029 2 Clamp
45 В.М8-6gх25.58.019 ГОСТ 17475-80 1 Screw
46 В.М6-6gх25.58.019 ГОСТ 17473-80 1 Screw
47 С 8.01.019 ГОСТ 11371-78 1 Washer
48 М6-6Н.6.019 ГОСТ 5915-70 3 Nut
49 5208.25 1 Electrical windscreen washer
49а 5208.20 1 Bracket
49б 5208.10 1 Jet nozzle

- 207 -
Fig.37.4 Electric equipment for the cab

- 208 -
Group 37. Electric equipment
Subgroup 3700. Electric equipment for the cab

Fig. No. Pos.


Designation Q-ty Description
No.
37.4 50 80-3710012 1 Bracket
51 3710.60 1 Parking brake lamp switch
52 С 5.01.019 ГОСТ 11371-78 2 Washer
53 3738.10 3 Road train light
54 80-3738001 1 Bracket
55 80-6708904 4 Gasket
56 М6-6gх20.58.35.019 ГОСТ 7798-70 1 Bolt
57 80-3724231-Б 2 Bundle
58 80-3724353-Г 1 Bundle
59 80-3724233-Б 1 Bundle

- 209 -
Fig.37.5. Alternator

- 210 -
Group 37. Electric equipment
Subgroup 3701. Alternator
Fig. No. Pos.
Designation Q-ty Description
No.
37.5 Г964.3701-1 1 Alternator (1-28, 34-44, 52, 54, 57)
1 ИЖКС 725325.002-03 1 Regulator cover
2 В.М4-6gх16.58.019 ГОСТ 17473-80 3 Screw
3 4 ОСТ 37.001.115-75 9 Washer
4 М5-6Н.6.019 ГОСТ 5915-70 7 Nut
5 5Т ОСТ 37.001.115-75 12 Washer
6 М6-6H.6.019 ГОСТ 5915-70 3 Nut
7 6Т ОСТ 37.001.115-75 3 Washer
8 ИЖКС 758491.032 2 Washer
9 ИЖКС 754152.003 1 Insulating washer
10 ИЖКС 757542.004 1 Insulator
11 С 5.01.019 ГОСТ 11371-78 7 Washer
12 ИЖКС 301261.037 1 Rear cover
13 ИЖКС 685158.002 1 Terminal board
14 ИЖКС 435214.002 1 Rectifier
15 ИЖКС 758165.001 1 Bolt М6
16 6-180502К1С9 1 Ball bearing
17 ИЖКС 713141.044 1 Spacing bush
18 ИЖКС 711143.007 1 Split bush
19 ИЖКС 757513.004 6 Phase insulator
20 ИЖКС 758121.001 3 Bolt М4х25
21 ИЖКС 713141.041 1 Spacing bush
22 СТ14 1 Regulator
23 ИЖКС 754152.004 1 Insulating washer
24 К73-21В 1 Capacitor
25 С 4.01.019 ГОСТ 11371-78 9 Washer
26 ИЖКС 758161.002 3 Screw ВМ4х28
27 ИЖКС 684214.005 1 Stator
28 ИЖКС 684241.006-02 1 Rotor
29 240-3701063-02 1 Slat
30 М8-6gх20.88.35.019 ГОСТ 7796-70 1 Bolt
31 С 8.01.019 ГОСТ 11371-78 2 Washer
32 50-1002073 1 Thrust washer
33 240-3701060-Б 1 Shield
34 ИЖКС 758191.001 3 Clamping bolt
35 ИЖКС 758151.003 3 Screw ВМ5х14,5
36 16 ОТ ОСТ 37.001.115-75 1 Washer
37 М16х1,5-6Н.6.019 ГОСТ 5915-70 1 Nut
38 ИЖКС 712645.001 1 Pulley
39 ИЖКС 723526.001 1 Fan
40 ИЖКС 758151.003-01 3 Screw ВМ5х26
41 ИЖКС 725117.001 1 Bearing cap
42 6-180603КС9 1 Ball bearing
43 М10-6gх30.88.35.019 ГОСТ 7796-70 1 Bolt
44 ИЖКС 301261.035 1 Front cover
45 М12-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
46 245-3701069 2 Washer
47 М8-6Н.6.019 ГОСТ 5915-70 1 Nut
48 С 10.01.019 ГОСТ 11371-78 2 Washer
49 М10-6Н.6.019 ГОСТ 5915-70 3 Nut
50 М8-6gх100.88.35.019 ГОСТ 7795-70 1 Bolt
51 М10-6gх55.88.35.019 ГОСТ 7795-70 1 Bolt
52 ИЖКС 713141.039 1 Rotor bush
53 240-3701056-В 1 Alternator bracket
54 ИЖКС 685442.035 1 Field coil
55 240-3701068-Б 1 Brace
56 М10-6gx20.88.35.019 ГОСТ 7796-70 1 Bolt
57 М4-6Н.6.019 ГОСТ 5927-70 3 Nut

- 211 -
Fig.37.6. Storage battery pack (starting system 12 V)

Fig.37.7. Storage battery pack (starting system 24 V)

- 212 -
Group 37. Electric equipment
Subgroup 3703. Storage battery pack (starting system 12 V)

Fig. No. Pos.


Designation Q-ty Description
No.
37.6 80-3700080-Б Storage battery pack
1 3703.16 2 Storage battery 12/88
2 80-3724042 1 Wire
3 70-3723042-02 1 Bush
4 80-3703061 1 Bracket
5 М6-6gх20.58.35.019 ГОСТ 7798-70 5 Bolt
6 80-3703062 1 Plate
7 3737.20 1 Manual switch of batteries 12 V
8 ТМ-59-6000-38 2 Boot
9 6Т ОСТ 37.001.115-75 5 Washer
10 М6-6Н.6.019 ГОСТ 5915-70 5 Nut
11 80-3724043-Б 1 Wire
12 80В-3703020 2 Clamp
13 80-3724039 1 Wire
14 80-3724038 1 Wire
15 М8-6gх30.88.35.019 ГОСТ 7796-70 4 Bolt
16 М8-6Н.6.019 ГОСТ 5915-70 4 Nut
17 70-3724041-В 1 Wire
18 8Т ОСТ 37.001.115-75 4 Washer

Group 37. Electric equipment


Subgroup 3703. Storage battery pack (starting system 24 V)

Fig. No. Pos.


Designation Q-ty Description
No.
37.7 80-3700085-Б Storage battery pack
1 3703.16 2 Storage battery 12/88
2 1221B-3724075 2 Wire
3 70-3723042-02 1 Bush
4 80-3703061 1 Bracket
5 М6-6gх20.58.35.019 ГОСТ 7798-70 5 Bolt
6 80-3703062 1 Plate
7 3737.25 1 Manual switch of batteries 24 V
8 54.24.445-Б 1 Tip
9 6Т ОСТ 37.001.115-7 5 Washer 5
10 М6-6Н.6.019 ГОСТ 5915-70 5 Nut
11 80B-3703020 2 Clamp
12 1025-3724044 1 Wire
13 М8-6gх30.88.35.019 ГОСТ 7796-70 4 Bolt
14 М8-6Н.6.019 ГОСТ 5915-70 8 Nut
15 70-3724041-В 1 Wire
16 8Т ОСТ 37.001.115-75 4 Washer
17 80-3724367 1 Wire

- 213 -
For the starting system rated at 24 V

For the starting system rated at 12 V

Fig.37.8. Storage battery pack


- 214 -
Group 37. Electric equipment
Subgroup 3703. Storage battery pack

Fig. No. Pos.


Designation Q-ty Description
No.
37.8 920-3700080 1 Storage battery pack
1 920-3703010-Б 1 Base
2 80В-3703020 1 Clamp
3 80В-3703012-01 1 Clamp
4 822-3723044 2 Buckle
5 923-3723012 1 Buckle
6 ТМ-59-6000-38 2 Rubber tip
7 54.24.445-Б 1*/2** Tip
13 М8-6gх20.88.35.019 ГОСТ 7796-70 10 Bolt
14 М8-6gх30.88.35.019 ГОСТ 7796-70 4 Bolt
15 М10-6gх30.88.35.019 ГОСТ 7796-70 1 Bolt
16 М12-6gх30.88.35.019 ГОСТ 7796-70 3 Bolt
17 М12-6gх45.88.35.019 ГОСТ 7796-70 1 Bolt
18 М6-6gх20.58.35.019 ГОСТ 7798-70 2 Bolt
20 М6-6Н.6.019 ГОСТ 5915-70 2 Nut
21 М8-6Н.6.019 ГОСТ 5915-70 6 Nut
23 С 6.01.019 ГОСТ 11371-78 2 Washer
24 С 8.01.019 ГОСТ 11371-78 6 Washer
25 822-3724041-Б 1* Wire
26 923-3724041 1** Wire
27 923-3724042 1*/2** Wire
28 1221В-3724041 1* Wire
29 1221В-3724044-Б 1 Wire
30 1221В-3724075 1* Wire
31 6Т ОСТ 37.001.115-75 2 Washer
32 8Т ОСТ 37.001.115-75 10 Washer
33 10 ОТ ОСТ 37.001.115-75 1 Washer
34 12 ОТ ОСТ 37.001.115-75 4 Washer
36 3703.16 2 Storage battery 12/88
37 3737.10 1* Remote switch of batteries 12 V
3737.15 1** Remote switch of batteries 24 V
39 3708.25 1* Starter 12 V, 2.7 kW
3708.15 1** Starter 24 V, 4 kW
*With the starting system rated at 12 V
**With the starting system rated at 24 V

- 215 -
Fig.37.9. Electric torch pre-heater

- 216 -
Group 37. Electric equipment
Subgroup 3707. Electric torch pre-heater

Fig. No. Pos.


Designation Q-ty Description
No.
37.9 ЭФП-8101500-01 1 Electric torch pre-heater
(1, 5-12, 17-21)
1 ЭФП-8101563-Б 1 Casing with coil
ЭФП-8101570 1 Coil
2 240-3707115-A1 1 Gasket
3 6Т ОСТ 37.001.115-75 2 Washer
4 М6-6gх20.88.35.016 ГОСТ 7798-70 2 Bolt
5 С 4.01.019 ГОСТ 11371-78 1 Washer
6 4 ОСТ 37.001.115-75 1 Washer
7 М4-6Н.6.019 ГОСТ 5927-70 1 Nut
8 ЭФП-8101610 1 Valve body
9 ЭФП -8101605-B 1 Valve
10 16-057 1 Valve spring
11 ЭФП -8101628-Б 1 Connecting pipe
12 ЭФП -8101627-В 1 Connecting pipe bolt
13 36-1104787 1 Connecting pipe bolt
14 36-1104788 1 Gasket
15 36-1104788-01 1 Gasket
16 242-3701130-Б 1 Pipeline
17 240-1007209 2 Gasket
18 М5-6Н.6.019 ГОСТ 5915-70 1 Nut
19 5 ОСТ 37.001.115-75 1 Washer
20 С 5.01.019 ГОСТ 11371-78 1 Washer
21 ЭФП -8101696 1 Insulator

- 217 -
Fig.37.10. Starter

- 218 -
Group 37. Electric equipment
Subgroup 3708. Starter

Fig. No. Pos.


Designation Q-ty Description
No.
37.10 1 16.281.793 1 Front cover
2 16.670.154-01 1/3 1 Solenoid switch assembly
16.670.155-01 2/4
16.670.262 1/3 1 Solenoid switch
16.670.263 2/4
16.150.007 1 Core
15.200.058 1 Spring
707.002.275 1 Ring
16.300.126 3 Screw
3 16.901.700 1 Lever
15.300.191 1 Screw
4 15.120.243 1 Bearing bush
5 16.901.700 1/2 1 Winding
16.500.664 3
16.500.773 4
15.300.191 1/2 4 Screw
15.300.166 3/4
6 16.903.908 1 1 Brush holder
16.903.773 2
16.901.954 3
16.901.626 4
7 16.770.083 1 4 Brush
16.770.119 2
16.770.378 3
16.770.121 4
15.200.243 4 Spring
8 16.283.449 1 Rear cover
15.120.155 1 Bush
15.400.249 1 Insert
15.900.140 1 Cover
15.400.056 1 Ring
15.300.710 2 Screw
9 15.120.155 1 Bearing bush
10 16.360.402 1 1 Rotor
15.120.155 2
16.361.499 3
16.361.820 4
11 16.903.550 1 One-way clutch
12 16.281.299 1 Intermediate cover
15.120.154 1 Bush
13 15.200.007 1 Ring
15.300.042 1 Ring
15.300.057 1/2 2 Pin
15.300.594 3/4
D6 1 Washer
M6 1 Nut
15.401.009 1 Washer
15.300.027 1 Washer
15.300.028 2 Washer
15.900.204 1 Washer
1
starter AZJ 3124(12 V)
2
starter AZJ 3353(24 V)
3
starter AZJ 3385 (12 V)
4
starter AZJ 3381 (24 V)

- 219 -
Fig.37.11. Road headlight assembly

Fig.37.12. Front light assembly

- 220 -
Group 37. Electric equipment
Subgroup 3711. Road headlight assembly.

Fig. No. Pos.


Designation Q-ty Description
No.
37.11 1 М5-6Н.6.019 ГОСТ 5927-70 6 Nut
2 5Т ОСТ 37.001.115-75 4 Washer
3 3723.15 2 Two-contact back plane
4 80-3723056 4 Slat
5 В.М5-6gх22.58.019 ГОСТ 17473-80 4 Screw
6 70-3723036-01 2 Cover
7 80-3724025-Г 2 Bundle
8 70-3723042-01 2 Bush
9 087101000 1 Headlight
10 М6-6Н.6.019 ГОСТ 5915-70 8 Nut
11 6Т ОСТ 37.001.115-75 8 Washer

Group 37. Electric equipment


Subgroup 3712. Front light assembly.

Fig. No. Pos.


Designation Q-ty Description
No.
37.12 1 85-3712045 1 Cover
2 А30.04.017-01 4 Cap
3 М8-6gх20.88.35.019 ГОСТ 7796-70 4 Bolt
4 8Т ОСТ 37.001.115-75 4 Washer
5 70-3723042-01 2 Bush
6 Н80-3724131 1 Bundle
7 Н80-3712040 1 Bracket
8 85-3712045-01 1 Cover
9 М6-6Н.6.019 ГОСТ 5915-70 4 Nut
10 6Т ОСТ 37.001.115-75 4 Washer
11 3712.10 2 Front light with side repeater signal
12 С 6.01.019 ГОСТ 11371-78 4 Washer
13 В.М6-6gх18.58.019 ГОСТ 17473-80 4 Screw
14 70-3723042-02 1 Bush
15 80-3723040 1 Bracket

- 221 -
Fig.37.13. Front light assembly

- 222 -
Group 37. Electric equipment
Subgroup 3712. Front light assembly.

Fig. No. Pos.


Designation Q-ty Description
No.
37.13 1 8703.302/1-01 1 Right road headlight
2 8703.302/01-01 1 Left road headlight
3 А30.04.017-01 4 Cap
4 36-4603079-Б2 2 Choke
5 920-3724141 2 Bundle
6 3712.10 1 Front light with side repeater signal
7 М8-6gх20.88.35.019 ГОСТ 7796-70 8 Bolt
8 С 8.01.019 ГОСТ 6958-78 4 Washer
9 8Т ОСТ 37.001.115-75 8 Washer
10 920-3712025-Б 1 Bracket
11 70-3723042-02 3 Bush
12 920-3724131-А 1 Bundle
13 8724.304/011 2 Working light
14 920-3711011 2 Bracket
15 А30.04.017 4 Cap
16 В.М6-6gх18.58.019 ГОСТ 17473-80 4 Screw
17 М6-6Н.6.019 ГОСТ 5915-70 8 Nut
18 С 6.01.019 ГОСТ 11371-78 4 Washer
19 6Т ОСТ 37.001.115-75 8 Washer
20 920-3712012 2 Bracket
21 М6-6gх18.88.35.019 ГОСТ 7798-70 4 Bolt
22 В.М6-6gх20.58.019 ГОСТ 17475-80 4 Screw
23 4х10.019 ТУ РБ 400024166.001-2000 8 Wood screw
24 920-3712021 2 Cover
25 920-3712013 2 Cramp
26 920-3712010 2 Bracket
27 920-3712022 2 Cover
28 602604 1 Female connector
29 502604 1 Male connector
30 920-3724132-А ГОСТ 23544-84 1 Bundle
31 920-3712025-Б-01 1 Bracket

- 223 -
Fig.37.14. Rear light assembly

- 224 -
Group 37. Electric equipment
Subgroup 3716. Rear light assembly

Fig. No. Pos.


Designation Q-ty Description
No.
37.14 1 3716.10 2 Rear light
2 85-3724163 1 Bundle (with metallic shells)
920-3724163 1 Bundle (with plastic shells)
3 3717.10 1 Number plate light
4 70-3723042-02 4 Bush
5 85-3724162 1 Bundle (with metallic shells)
920-3724162 1 Bundle (with plastic shells)
6 3723.10 1 Trailer socket
7 М10-6gх25.88.35.019 ГОСТ 7796-70 2 Bolt
8 М10-6Н.6.019 ГОСТ 5915-70 2 Nut
9 С 10.01.019 ГОСТ 6958-78 2 Washer
10 10 ОТ ОСТ 37.001.115-75 2 Washer
11 Ф50-3731011 2 Bracket
12 3731.10 2 Cat’s eye
13 М12-6gх25.88.35.019 ГОСТ 7796-70 1 Bolt
14 М12-6Н.6.019 ГОСТ 5915-70 1 Nut
15 12 ОТ ОСТ 37.001.115-75 1 Washer
16 В.М6-6gх18.58.019 ГОСТ 17473-80 8 Screw
17 М6-6Н.6.019 ГОСТ 5915-70 10 Nut
18 6Т ОСТ 37.001.115-75 10 Washer
19 85-3716012 2 Bracket
20 С 6.01.019 ГОСТ 11371-78 4 Washer
21 85-3716015 2 Cover
22 80-3724005 1 Bundle
23 8724.31/2021 2 Working light
24 В.М6-6gх16.58.019 ГОСТ 17473-80 2 Screw
25 80В-3710010 1 Panel
26 80-3724036 1 Wire
27 80В-3716020-Б 1 Bracket
28 80-3723043 3 Cramp
29 В.М5-6gх12.58.019 ГОСТ 17473-80 3 Screw
30 М5-6Н.6.019 ГОСТ 5927-70 3 Nut
31 С 5.01.019 ГОСТ 11371-78 3 Washer
32 5Т ОСТ 37.001.115-75 3 Washer

- 225 -
Fig. 38.1. Base, instruments
- 226 -
Group 38. Instrumentation
Subgroup 3805. Base, instruments

Fig. No. Pos.


Designation Q-ty Description
No.
38.1 80-3805010-Д1 1 Dashboard (1-52)
1 М10-6Н.6.019 ГОСТ 5915-70 2 Nut
2 10 ОТ ОСТ 37.001.115-75 2 Washer
3 80-3805030 2 Bracket
4 М6-6Н.6.019 ГОСТ 5915-70 11 Nut
5 6Т ОСТ 37.001.115-75 13 Washer
6 8Т ОСТ 37.001.115-75 2 Washer
7 М8-6gх16.88.35.019 ГОСТ 7796-70 2 Bolt
8 В.М6-6gх12.58.019 ГОСТ 17473-80 9 Screw
9 80-3724395-Г 1 Bundle
10 80-3724512-В1 1 Bundle
80-3724517-В1* 1 Bundle
82П-3724317** 1 Bundle
11 70-3723042-01 1 Bush
12 80-3805043 1 Bracket
13 3747.15 1 Parking brake lamp relay
14 С 6.01.019 ГОСТ 11371-78 6 Washer
15 М6-6gх16.88.35.019 ГОСТ 7798-70 4 Bolt
16 4х10.019 ТУ РБ 400024166.001-2000 4 Wood screw
17 80-3723026 4 Cramp
18 С 5.01.019 ГОСТ 11371-78 1 Washer
19 3747.20 1 Signalling relay
20 80-3805064 1 Choke
21 4х16.019 ТУ РБ 400024166.001-2000 7 Wood screw
22 В.М6-6gх18.58.019 ГОСТ 17473-80 2 Screw
23 80-3805035-01 1 Bracket
24 3803.15 1 Pilot lamp block
25 80-3805015 1 Bracket
26 3803.10 1 Pilot lamp block
27 3801.15 1 Combination meter КП-5
28 3813.10 1 Tachospeedimeter
Housing (with the switch ПКП-1 or ПКП-
29 80-3709023-В 1
1А)
Housing (with the switch 3912.3769 or
80-3709023 1
3912.3769-01)
30 В.М5-6gх12.58.019 ГОСТ 17473-80 2 Screw
Steering-wheel-mounted switch
31 ПКП-1 or ПКП-1А*** 1
(with housing 80-3709023-В)
Steering-wheel-mounted switch
3912.3769 or 3912.3769-01*** 1
(with housing 80-3709023)
32 М5-6Н.6.019 ГОСТ 5927-70 2 Nut
33 5Т ОСТ 37.001.115-75 2 Washer
34 В.М6-6gх12.58.019 ГОСТ 17473-80 4 Screw
35 80-3805035 1 Bracket
36 3813.15 1 Control panel
37 80-3805014 1 Nut
38 3710.45 1 Starter and instrumentation switch
38а 822-3805013 1 Nameplate
39 80-3805021-Б 1 Shield
40 80-3805012-Б 1 Seal
41 80-3801327 1 Choke
3710.55* 1 Battery disconnection switch
* With the storage battery located outside the cab
** With electric torch pre-heater
*** With steering column 85П-3401100

- 227 -
Fig. 38.1. Base, instruments
- 228 -
Group 38. Instrumentation
Subgroup 3805. Base, instruments

Fig. No. Pos.


Designation Q-ty Description
No.
38.1 42 3710.50** 1 Starting aid switch
80-3801327 1 Choke
43 3710.50 1 Windscreen washer switch
44 3709.20 1 Light switch
45 3710.10 1 Fault signalling switch
46 С 8.01.019 ГОСТ 11371-78 1 Washer
47 80-3805050-Б1-02 1 Base
48 50-4607064 1 Bush
49 3741.20** 1 Additional resistor
50 80-3723036 1 Cramp
51 3747.50 2 NO relay 30А
52 80-3724610-Б** 1 Bundle
* With the storage battery located outside the cab
** With electric torch pre-heater

- 229 -
Fig. 38.2. Wall, cover

- 230 -
Group 38. Instrumentation
Subgroup 3805. Wall, cover

Fig. No. Pos.


Designation Q-ty Description
No.
38.2 1 В.М6-6gх12.58.019 ГОСТ 17473-80 5 Screw
2 6Т ОСТ 37.001.115-75 6 Washer
3 М6-6Н.6.019 ГОСТ 5915-70 4 Nut
4 3747.25 1 Starter relay
5 3747.40 1 NC relay 20 А
6 80-3805025-Г 1 Nameplate
7 3747.50 2* NO relay 30 А
3747.50 1 NO relay 30 А
8 80-3805070 1 Panel
9 М5-6Н.6.019 ГОСТ 5927-70 1 Nut
10 В.М6-6gх18.58.019 ГОСТ 17473-80 1 Screw
11 С 6.01.019 ГОСТ 11371-78 1 Washer
12 3747.10 1 Turn indicator flasher
13 5Т ОСТ 37.001.115-75 1 Washer
14 В.М5-6gх16.58.019 ГОСТ 17473-80 1 Screw
15 80-3805041 1 Wall
16 3722.15 1 Fuse box
17 80-3805061 1 Cover
18 80-3805027-В 1 Nameplate
19 80-3805065 1 Screw
20 80-3805037-Г 1 Nameplate
21 006-010-25-1-4 ГОСТ 18829-73/9833-73 1 Ring
22 80-3805026 1 Nameplate
23 ИКСУ 741134.002 1 Holder
24 3722.10 1 Fuse box
25 3722.35 1 Fuse box
26 4х10.019 ТУ РБ 400024166.001-2000 2 Wood screw
27 80-3805043 1 Bracket
28 70-3723042-01 1 Bush
29 70-3723042-02 1 Bush
30 80-3724395-Г 1 Bundle
31 80-3724512-В1 1 Bundle
80-3724517-В1** 1 Bundle
32 3747.30 1 Instrumentation supply relay
33 3741.15* 1 Pre-heater control unit
3741.10 1 Block of glow plugs
* With electric torch pre-heater
** With the storage battery located outside the cab

- 231 -
Fig.39.1. Operator tools

Fig.39.2. First-aid kit

- 232 -
Group 39. Tools and accessories
Subgroup 3901. Operator tools

Fig. No. Pos. Number of the assembly


Q-ty Description
No. unit or part
39.1 1 70-3901038 1 Wrench 41x46
2 70-3901027 1 Socket wrench S=27х32
3 МД214 1 Pressure gauge

Group 39. Tools and accessories


Subgroup 3912. First-aid kit

Fig. No. Pos. Number of the assembly Q-ty Description


No. unit or part
39.2 1 70-3912153-A 1 Bracket
2 70-3912152 1 Case
3 70-3912151 1 Cover
4 С 6.01.019 ГОСТ 11371-78 3 Washer
5 70-3723033 3 Cramp
Optionally

- 233 -
Fig.42.1. Rear power take-off shaft

- 234 -
Group 42. Power take-off shaft
Subgroup 4202. Rear power take-off shaft

Fig. No. Pos.


Designation Q-ty Description
No.
42.1 85-4202010 1 Rear power take-off shaft
85-4202020 1 Cover (1-16,20,21,25-31,34-37,46-56)
70-4202030-А 1 Crown gear (36, 38-45)
1 209А ГОСТ 8338-75 2 Bearing
2 50-4202078 2 Pin
3 50-4202074 1 Lever
4 50-4202058 1 Bracket
5 85-4202074 1 Lever
6 ШЦК 8х36 2 Pin
7 80-4202076 1 Shaft
8 54.38.619 1 Ring
9 70-4202072-Б 1 Shaft
10 А.8х20.65Г Chemical phosphate oil- 1 Pin
impregnated coating ГОСТ 14229-93
11 014-018-25-2-2 ГОСТ 18829-73/9833-73 1 Ring
12 80-4202082 1 Bush
13 С18 ГОСТ 13940-86 1 Ring
14 85-4202079 1 Plate
15 10 ОТ ОСТ 37.001.115-75 12 Washer
16 М10-6gх40.88.35.019 ГОСТ 7796-70 1 Bolt
17 Ф70-4202095 1 Hosing
18 Ф70-4202092 1 Cover
19 М8-6gх16.88.35.019 ГОСТ 7796-70 4 Bolt
М8-6Н.6.019 ГОСТ 5915-70 4 Nut
8Т ОСТ 37.001.115-75 4 Washer
С 8.01.019 ГОСТ 11371-78 4 Washer
20 80-4202081-А 1 Plate
21 80-4202019-Б 1 Shank (8 splines)
80-4202019-Б-01 1 Shank (6 splines) (optional)
80-4202019-Б-02 1 Shank (21 splines) (optional)
22 50-4202065-А 1 Cap
23 М8-6gх16.88.35.019 ГОСТ 7796-70 2 Bolt
24 8Т ОСТ 37.001.115-75 2 Washer
25 М10-6gх18.88.35.019 ГОСТ 7796-70 6 Bolt
26 80-4202042-Б 1 Cover
27 50-4202092А 1 Gasket
28 80-4202017-Б 1 Shaft
29 2.2-80х105-1 ГОСТ 8752-79/ 1 Cuff
ОСТ 3805146-78
30 60310А ГОСТ 7242-81 1 Bearing
31 2С110 ГОСТ 13941-86 2 Ring
32 М12х1,25-6Н.6.019 ГОСТ 5915-70 1 Nut
33 50-4202068 1 Setting screw
34 85-4202100-01 or 1 Tape with strap 85-4202057
(ТИИР 430) or
85-4020100-02 tape with strap 85-4202057-А7
(ITB 2842)
35 85-4202100 1 Tape with strap 85-4202056
(ТИИР 430)
36 2С50 ГОСТ 13940-86 2 Ring
37 2С85 ГОСТ 13941-86 1 Ring
38 7,938-100 ГОСТ 3722-81 1 Ball
39 50-4202046-Б 1 Shift collar
40 А61.03.002 1 Ring

- 235 -
Fig.42.1. Rear power take-off shaft

- 236 -
Group 42. Power take-off shaft
Subgroup 4202. Rear power take-off shaft

Fig. No. Pos.


Designation Q-ty Description
No.
42.1 41 70-4202044-Б 1 Shaft
42 2С90 ГОСТ 13941-86 1 Ring
43 210 АУШ1 GOST8338-75 1 Bearing
44 50-4702066-А 1 Cage
45 70-4202043 1 Crown gear
46 70-4202083-А 1 Nut
47 208А ГОСТ 8338-75 1 Bearing
48 КК20х26х34Е ГОСТ 24310-80 3 Bearing
49 70-4202024 3 Pinion
40 85-4202065 1 Carrier
51 70-4202431 3 Pin
52 70-4202026 3 Pinion shaft
53 70-4202032 1 Sun gear
54 85-4202033 1 Drum
55 2С68 ГОСТ 13940-86 1 Ring
56 70-4202077 1 Bush
57 М10-6gх35.88.35.019 ГОСТ 7796-70 5 Bolt
58 М16х1,5-6Н.6.019 ГОСТ 5915-70 4 Nut
59 16 ОТ ОСТ 37.001.115-75 4 Washer
60 С 16.01.019 ГОСТ 6958-78 2 Washer

- 237 -
Fig.42.2. Rear power take-off shaft

- 238 -
Group 42. Power take-off shaft
Subgroup 4202. Rear power take-off shaft

Fig. Pos. Number of the assembly unit or part Q-ty Description


No. No.
42.2 1221-4202010-А 1 Rear PTO shaft
1221-4202020-A 1 Cover (1-16, 20, 21, 25-31, 35-37, 47-56)
70-4202030-A 1 Crown gear (38-46)
1 209А ГОСТ 8338-75 2 Bearing
2 1221-4202077 1 Bush
3 50-4202078 2 Pin
4 50-4202074 1 Lever
5 50-4202058 1 Bracket
6 85-4202074 1 Lever
7 ШЦК 8х36 2 Pin
8 80-4202076 1 Shaft
9 54.38.619 1 Ring
10 70-4202072-Б 1 Ось
11 А.8х20.65Г 1 Pin
12 014-018-25-2-2 ГОСТ 18829-73/9833-73 1 Ring
13 80-4202082 1 Bush
14 С18 ГОСТ 13940-86 1 Ring
15 85-4202079 1 Plate
16 10 ОТ ОСТ 37.001.115-75 12 Washer
17 М10-6gх40.88.35.019 ГОСТ 7796-70 1 Bolt
18 80-4202081-A 1 Plate
80-4202019-Б 1 Shank (with 8 splines)
19 80-4202019-Б-01* 1 Shank (with 6 splines)
80-4202019-Б-02* 1 Shank (with 21 splines)
20 1321-4202180 1 Plate
21 50-4202065-A 1 Cap
22 М8-6gх16.88.35.019 ГОСТ 7796-70 2 Bolt
23 8Т ОСТ 37.001.115-75 2 Washer
24 М10-6gх18.88.35.019 ГОСТ 7796-70 6 Bolt
25 1221-4202042 1 Cover
26 50-4202092-A 1 Gasket
27 1221-4202017 1 Shaft
28 2.2-80х105-1 2 Cuff
ГОСТ 8752-79/ОСТ 3805146-78
29 60310А ГОСТ 7242-81 1 Bearing
30 2С110 ГОСТ 13941-86 1 Ring
31 M12x1,25-6Н.6.019 ГОСТ 5915-70 1 Nut
32 50-4202130 1 Screw
33 85-4202100-01 or 1 Tape with strap 85-4202057
(ТИИР 430)
85-4202100-02 Tape with strap 85-4202057-А7
(ITB 2842)
34 85-4202100 1 Tape with strap 85-4202056
(ТИИР 430)
35 2С50 ГОСТ 13940-86 2 Ring
36 2С85 ГОСТ 13941-86 1 Ring
37 7,938-100 ГОСТ 3722-81 1 Ball
38 50-4202046-Б 1 Shift collar
39 A61.03.002 1 Ring
40 70-4202044-Б 1 Shaft
41 2С90 ГОСТ 13941-86 1 Ring
42 210 АУШ1 GOST8338-75 1 Bearing
43 50-4202066-A 1 Cage
44 70-4202043 1 Crown gear
45 70-4202083-A 1 Nut
* Optionally
- 239 -
Fig.42.2. Rear power take-off shaft

- 240 -
Group 42. Power take-off shaft
Subgroup 4202. Rear power take-off shaft

Fig. Pos. Number of the assembly unit or part Q-ty Description


No. No.
42.2 46 208А ГОСТ 8338-75 1 Bearing
47 КК20х26х34Е ГОСТ 24310-80 3 Bearing
48 70-4202024 3 Pinion
49 85-4202065 1 Carrier
50 70-4202431 3 Pin
51 70-4202026 3 Pinion shaft
52 70-4202032 1 Sun gear
53 85-4202033 1 Drum
54 2С68 ГОСТ 13940-86 1 Ring
55 70-4202077 1 Bush
56 М10-6gх50.88.35.019 ГОСТ 7795-70 5 Bolt
57 16 ОТ ОСТ 37.001.115-75 4 Washer
58 М16х1,5-6Н.6.019 ГОСТ 5915-70 4 Nut
59 1221-4202028 4 Pin

- 241 -
Fig.42.3. Driving pulley

- 242 -
Group 42. Power take-off shaft
Subgroup 4211. Driving pulley

Fig. No. Pos.


Designation Q-ty Description
No.
42.3 40-4211010-01 1 Driving pulley to be mounted on the
eight-spline PTO shank (1-34)
40-4211035 1 Casing (12-22, 30-34)
Driving shaft with 8 splines (3-6, 8, 10,
40-4211040 1
11)
40-4211050 1 Hose pipe with 8 splines (1-6, 8, 10, 11)
40-4211065 1 Shaft (16-13, 22)
1 40-4211052 1 Hose pipe
2 КФА-50x70 1 Cuff 50х70
3 40-4211043 1 Nut
4 36-1701061 1 Washer
5 211 АУШ1 ГОСТ 8338-75 1 Bearing
6 40-4211047 1 Bush
7 40-4211079 1 Gasket
8 311А ГОСТ 8338-75 1 Bearing
9 40-4211081 1 Gasket
10 40-4211045 1 Shaft with eight-spline socket
11 40-4211082 1 Choke
12 ПК КГ 3/8" 1 Plug
13 ПК КГ 3/4" 2 Plug
14 40-4211037 1 Casing
15 CУ-1/8"-A 1 Breather
16 40-4211071 1 Shaft-gear
17 408 ГОСТ 8338-75 2 Bearing
18 40-4211072 1 Spacing bush
19 120-125-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
20 36-4211054-Б 6 Gasket (0.5 mm)
21 36-4211055 8 Gasket (0.2 mm)
22 36-4211048 1 Cage
23 4х36.019 ГОСТ 397-79 1 Cotter pin
24 М20х1,5-6Н.04.019 ГОСТ 15522-70 1 Nut
25 40-3502084 1 Washer
26 40-3502083 1 Gasket
27 40-4211075 1 Pulley assembly
28 М12-6gх40.88.35.019 ГОСТ 7796-70 6 Bolt
29 2.2-65х90-1 ГОСТ 8752-79/ 1 Cuff
ОСТ 38 05146-78
30 12 ОТ ОСТ 37.001.115-75 10 Washer
31 36-4211073 1 Socket
32 36-4211057 1 Gasket

- 243 -
Fig.42.4. Side power take-off shaft

- 244 -
Group 42. Power take-off shaft
Subgroup 4204. Side power take-off shaft

Fig. No. Pos.


Designation Q-ty Description
No.
42.4 Side power take-off shaft with 8-spline
50-4204010 1
shank (1-28)
1 50-4204022 1 Side shaft with 8-spline shank
2 Ф50-4204026 1 Gear (Z=37)
3 020-025-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
4 50-4204040-А 1 Roller
5 50-4204015-Б 1 Casing
6 208А ГОСТ 8338-75 1 Bearing
7 72 ГОСТ 2893-82 1 Ring
8 50-1601038 1 Washer
9 12 ОТ ОСТ 37.001.115-75 1 Washer
10 М12-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
11 50-1601091 2 Gasket
12 50-1601089 1 Cover
13 50-1310136-А 1 Handle
14 М8-6Н.6.019 ГОСТ 5915-70 1 Nut
15 80-4204042 1 Rod
16 3,2х18.019 ГОСТ 397-79 1 Cotter pin
17 50-4204034 1 Control lever
18 А.10х40.65Г Chemical phosphate oil- 1 Pin
impregnated coating
ГОСТ 14229-93
19 1,6-О-С ГОСТ 3282-74 1 Wire (L=200 mm)
20 50-4204036-Б 1 Plate
21 50-4204038 1 Plate
22 6-50306К GOST8338-75/2893-82 1 Bearing
23 50-4204024 1 Cover
24 8Т ОСТ 37.001.115-75 10 Washer
25 М8-6gх25.88.35.019 ГОСТ 7796-70 4 Bolt
26 2.2-38х58-1 ГОСТ 8752-79/ 1 Cuff
ОСТ 3805146-78
27 С 8.01.019 ГОСТ 11371-78 2 Washer
28 М8-6gх16.88.35.019 ГОСТ 7796-70 8 Bolt
29 50-4202065-А 1 Cap

- 245 -
Fig.42.5. Rear power take-off shaft control

- 246 -
Group 42. Power take-off shaft
Subgroup 4216. Rear power take-off shaft control

Fig. No. Pos.


Designation Q-ty Description
No.
42.5 80В-4216010 1 Rear PTO control
80-4216060 1 Lever rod (24, 25, 28)
50-4216070-Б 1 Control roller (9, 10)
80В-4216095-А 1 Rod (23-25)
1 70-4216023-А 1 Bolt
2 М16-6Н.6.019 ГОСТ 5915-70 1 Nut
3 М12-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
4 12 ОТ ОСТ 37.001.115-75 1 Washer
5 50-4216022-А 1 Lever
6 025-030-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
7 50-4216024 1 Control roller bush
8 СШ-611 1 Key 6х11
9 50-4216018 1 Control roller
10 50-4216034 2 Screw axis
11 3,2х18.019 ГОСТ 397-79 6 Cotter pin
12 70-4216028 2 Screw
13 80-4216039 1 Stop
14 80В-4216105 1 Bracket
15 А13.17.000-01 1 Handle
16 85-4216100-Б 1 Lever
17 70-4216015 1 Cover
18 М10-6gх60.88.35.019 ГОСТ 7795-70 1 Bolt (auxiliary)
19 4х36.019 ГОСТ 397-79 1 Cotter pin
20 М8-6gх16.88.35.019 ГОСТ 7796-70 3 Bolt
21 8Т ОСТ 37.001.115-75 3 Washer
22 М8-6Н.6.019 ГОСТ 5915-70 3 Nut
23 80-4216091А 1 Rod
24 М12х1,25-6Н.6.019 ГОСТ 5915-70 3 Nut
25 50-3502203 3 Fork
26 80-4216050 1 Hub
27 12х32 ОСТ 37.001.163-75 3 Pin
28 80-4216043 1 Rod
29 70-4216048-Б 1 Bolt
30 16 ОТ ОСТ 37.001.115-75 1 Washer
31 70-4216013 1 Eye
32 70-4216011 1 Spring

- 247 -
Fig.42.6. Rear power take-off shaft control (for tractors with hydraulic lift and lift hitch
mechanism)

- 248 -
Group 42. Power take-off shaft
Subgroup 4216. Rear power take-off shaft control

Fig. No. Pos.


Designation Q-ty Description
No.
42.6 Hydraulic drive of the differential lock
920-4803150 1
clutch and PTO
80-4216100 1 Cylinder (8-16)
1 821-4216048 1 Bolt
2 С 16.01.019 ГОСТ 11371-78 1 Washer
3 4х36.019 ГОСТ 397-79 1 Cotter pin
4 85-4216125 1 Oil pipeline
5 Д18-051 8 Bolt
6 Д18-055-А 16 Seal ring
7 85-4216130 1 Oil pipeline
8 80-4216115 1 Casing
9 М12-6Н.6.019 ГОСТ 5915-70 1 Nut
10 10 ОТ ОСТ 37.001.115-75 1 Washer
11 80-4216118 1 Piston
12 045-050-30-2-2 ГОСТ 18829-73/9833-73 2 Ring
15.54х2.62 DBS/AS MS 29513
13 3 Ring
ГОСТ 18829-73/9833-73
14 80-4216116 1 Front cover
15 80-4216119 1 Rod
16 80-4216121 1 Tip
17 80-4216039 1 Stop
18 70-4216028 2 Screw
19 3,2х18.019 ГОСТ 397-79 3 Cotter pin
20 50-4216070-Б 1 Roller
21 СШ-611 1 Key 6х11
22 М12-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
23 12 ОТ ОСТ 37.001.115-75 2 Washer
24 821-4216020 1 Lever
25 С 12.01.019 ГОСТ 11371-78 1 Washer
26 50-1605152 1 Spring
27 70-3514094 1 Hook
28 80-1602116 1 Eye
29 1221-2412026 4 Hose pipe
30 822-4801190 1 Oil pipeline (PTO)
31 822-4801195 2 Oil pipeline (PTO)
32 923-4803165 1 Oil pipeline (differential lock clutch)
33 920-4803155 1 Oil pressure line
34 822-4801180-Б-01 1 Hydraulic drive plate
Hydraulic distributor (differential lock
35 РГ822-6/1.2 СЕ.В.574А.Г12.О1 1
clutch)
36 РГ822-6/1.2 СЕ.В.574А.Г12.О1 1 Hydraulic distributor (PTO)
37 “NORMA” TORRO 12-20/9-C6W 8 Clamp
38 80-4216117 1 Pin
39 025-030-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
40 8Т ОСТ 37.001.115-75 1 Washer
41 М8-6gх40.88.35.019 ГОСТ 7795-70 1 Bolt
42 1021-4803158 1 Adapter
43 017-022-30-1-4 ГОСТ 18829-73/9833-73 1 Ring

- 249 -
Fig.42.7. Ballast

- 250 -
Group 42. Power take-off shaft
Subgroup 4235. Ballast

Fig. No. Pos.


Designation Q-ty Description
No.
42.7 1 80-4235011-A 8 Weight
2 1025-4235012 2 Bolt
3 85-4235025-Б 1 Lug
4 70-4235030 1 Pin assembly
5 М16-6gх45.88.35.019 ГОСТ 7796-70 2 Bolt
6 16 ОТ ОСТ 37.001.115-75 46 Washer
7 С 16.01.019 ГОСТ 11371-78 2 Washer
8 1521-4235011-A 2 Weight
9 1025-4235015-01 1 String
10 М16-6gх32.88.35.019 ГОСТ 7796-70 24 Bolt
11 822-4235028 1 Strip
12 54.38.619 2 Locking ring
13 50-4605027 2 Pin
14 20 ОТ ОСТ 37.001.115-75 2 Washer
15 М20-6Н.6.019 ГОСТ 5915-70 2 Nut
16 М16-6gх40.88.35.019 ГОСТ 7796-70 20 Bolt
17 М16-6Н.6.019 ГОСТ 5915-70 11 Nut
18 923-4235016 1 Bracket
19 822-4235028-01 1 Strip
20 70-4605036 2 Bolt

- 251 -
Fig.42.8. Front ballast

- 252 -
Group 42. Power take-off shaft
Subgroup 4235. Front ballast

Fig. No. Pos.


Designation Q-ty Description
No.
42.8 1 70-4235011 10 Weight
2 С16.01.019 ГОСТ 6958-78 1 Washer
3 16 ОТ ОСТ 37.001.115-75 3 Washer
4 М16-6Н.6.019 ГОСТ 5915-70 1 Nut
5 70-4235020 1 Bracket
6 М16-6gx32.88.019 ГОСТ 7796-70 2 Bolt
7 М20-6Н.6.019 ГОСТ 5915-70 2 Nut
8 20 ОТ ОСТ 37.001.115-75 2 Washer
9 70-4605036 2 Bolt
10 80-4235015 1 String
11 50-4605079-Б 1 Pin assembly
12 А61.07.001 1 Cotter pin

- 253 -
b = joint
width

Fig. 46.1. Rear mounted attachment

- 254 -
Group 46. Hydraulic system
Subgroup 4605. Rear mounted attachment
(For tractors with power governor)
Fig. No. Pos.
Designation Q-ty Description
No.
46.1 Р70-4605010 1 Rear mounted attachment (1-105)
50-4605012 2 Brace (1, 36, 76, 82)
80-4605150-02 1 Brace (28-33, 42-51, 99-105) L=475 mm
А61.05.100-01 1 Locking pin (39, 41)
А61.03.000 1 Upper rod (36-41, 87-89)
А61.03.200 1 Screw (37-41, pin А61.03.001-02 Ø22)
А61.03.200-01 1 Screw (37-41, pin А61.03.001-01 Ø25)
А61.04.000 2 Brace (57-60)
70-4605340 1 Lever (16, 17)
80-4605025 1 Cross-bar (64-68)
50-4605030-АЗ 1 Right rod (54, 55, 64, 70-73, 86)
50-4605035-A3 1 Left rod (55, 64, 69, 70-74)
50-4605105-А 1 Trailer pin assembly (64, 66)
50-4605115 2 Brace (52-53, 56-62, 84, 85)
1 А61.02.100 1 Screw
2 4х36.019 ГОСТ 397-79 1 Cotter pin
3 70-3003032 2 Nut М18x1,5-6Н.6.019
4 50-4605076 2 Pin
5 70-4605317 2 Restraint
6 21А-1601150 4 Spring
7 50-4605027 2 Pin
8 54.38.619 2 Ring
9 М12-6gх25.88.35.019 ГОСТ 7796-70 6 Bolt
10 12 ОТ ОСТ 37.001.115-75 7 Washer
11 40-4605023-А2 2 Washer
12 80-4605021 1 Lever
13 70-4605032 2 Bush
14 70-4605308-Б 2 Bush
15 70-4605016-Б 1 Bracket
16 70-4605313 1 Pin
17 70-4605024-А 1 Pivot lever
18 2С65 ГОСТ 13940-86 1 Ring
19 50-4605069 1 Bush
20 А61.07.002 1 Spring
21 М12-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
22 С 12.01.019 ГОСТ 11371-78 1 Washer
23 70-4605240-А 1 Bracket
24 М12-6Н.6.019 ГОСТ 5915-70 1 Nut
25 70-4605023 1 Pivoting shaft
26 80-4605022 1 Lever
27 70-4605168 1 Shackle
28 А61.01.016-Б 1 Shaft
29 А61.01.400 1 Fork
30 А61.01.600 1 Shaft
31 А61.01.014 1 Handle
32 А61.01.017 2 Bush
33 016-021-30-2-4 ГОСТ 18829-73/9833-73 1 Ring
34 А.8х45.65Г ГОСТ 14229-93 1 Pin
35 А61.01.004 1 Pin
36 А61.02.003 1 Locknut
37 А61.03.002 2 Ring
38 А61.03.001-01 1 Pin Ø 25
А61.03.001-02 1 Pin Ø 22 (optional)
39 А61.08.001-01 1 Chain (9 links)

- 255 -
b = joint
width

Fig. 46.1. Rear mounted attachment

- 256 -
Group 46. Hydraulic system
Subgroup 4605. Rear mounted attachment
(For tractors with power governor)
Fig. No. Pos.
Designation Q-ty Description
No.
46.1 40 А61.02.100-04 1 Screw (joint hole Ø 22.5)
А61.02.100-05 1 Screw (joint hole Ø 25.7)
41 А61.05.000 1 Locking pin with ring
42 А61.01.001 1 Gear
43 А61.01.005 1 Axle
44 А61.01.003 1 Gasket
45 1.3.Ц9.хр ГОСТ 19853-74 3 Greaser
46 А61.01.104 1 Casing
47 А61.01.013 1 Bush
48 А61.01.008 1 Pipe
49 А61.01.011 1 Cap
50 А61.01.009 1 Restraint
51 70-4605100 1 Fork
52 50-4605086 4 Bolt
53 М12-6Н.04.019 ГОСТ 5919-73 4 Nut
54 С50-4605040-А 1 Rod (b=45)
80-4605040 1 Rod (b=38 optionally)
55 70-4605048-А 2 Lug
56 3,2х18.019 ГОСТ 397-79 Cotter pin
57 А61.04.002-01 2 Screw (right thread)
58 М18-6Н.04.019 ГОСТ 5916-70 2 Nut
59 А61.04.003 2 Brace
60 А61.04.002 2 Screw (left thread)
61 А61.09.002 4 Shackle
62 50-4605033-Б1 2 Bracket
63 Ф50-4605084 2 Pin
64 А61.07.001 4 Cotter pin
65 А61.10.002 2 Pin
66 50-4605079-Б 1 Pin assembly
67 А61.11.001 1 Fork
68 80-4605046 1 Cross-bar
69 С50-4605045-А 1 Rod (b=45)
80-4605040-01 1 Rod (b=38 optionally)
70 А61.05.004 4 Ring
71 А61.05.005 4 Locking pin
72 50-4605049-Б 2 Pin
73 5х36.019 ГОСТ 397-79 3 Cotter pin
74 70-4605055 1 Rod
75 С18.01.019 ГОСТ 11371-78 2 Washer
76 50-4605100-Б 1 Fork
77 А04.02.020 2 Nut
78 5х45.019 ГОСТ 397-79 2 Cotter pin
79 70-4605047 2 Bush
80 50-4605068-Б1 2 Washer
81 70-4605026 1 Shaft
82 А61.02.001 1 Brace
83 50-4605018-Б 1 Bush
84 М16-6Н.6.019 ГОСТ 5915-70 2 Nut
85 50-4605019 2 Bolt
86 70-4605050 1 Rod
87 А61.03.102 1 Handle
88 А61.03.101 1 Pipe
89 А61.02.100-03 1 Screw (left thread)

- 257 -
b = joint
width

Fig. 46.1. Rear mounted attachment

- 258 -
Group 46. Hydraulic system
Subgroup 4605. Rear mounted attachment
(For tractors with power governor)
Fig. No. Pos.
Designation Q-ty Description
No.
46.1 90 А61.10.001-02 1 Pin
91 70-4605330-Б 1 Shackle
92 70-4605302-Б 1 Spring
93 А61.10.001 1 Pin
94 70-4605320 1 Bolt
95 70-4605036 5 Bolt
96 20 ОТ ОСТ 37.001.115-75 5 Washer
97 70-4605304-Б 1 Washer
98 70-4605316 1 Nut
99 А61.01.006 2 Bolt
100 М14-6gх40.88.35.019 ГОСТ 7796-70 2 Bolt
101 14 ОТ ОСТ 37.001.115-75 4 Washer
102 А61.01.204 1 Cover
103 А61.01.012 1 Restraint
104 А61.01.300 1 Pipe
105 8109 ГОСТ 7872-89 1 Bearing

- 259 -
Fig. 46.2. Rear mounted attachment

- 260 -
Group 46. Hydraulic system
Subgroup 4605. Rear mounted attachment
(For tractors with power governor)
Fig. No. Pos.
Designation Q-ty Description
No.
46.2 Р80-4605010 1 Rear mounted attachment (1-101)
1220-4605012 2 Brace (1,74-76)
1220-4605030-01 b=38
1 Rod (49,50,58-60)
1220-4605030-03 b=45
1220-4605030-02 b=38
1 Rod with chain (49,50,58-60,73)
1220-4605030-04 b=45
1220-4605150 1 Brace (27-48,51-53,72,90-92) L=515 mm
1220-4605580 2 Brace (65-68)
70-4605145-01 1 Bracket (9,10,17-22)
70-4605340 1 Lever (16,17)
822-4605085 1 Cross-bar (54,96-101)
А61.05.100-01 1 Locking pin (39, 41)
А61.03.000 1 Upper rod (36-41, 77-79)
А61.03.200 1 Screw (37-41, pin А61.03.001-02 Ø22)
А61.03.200-01 1 Screw (37-41, pin А61.03.001-01 Ø25)
1 1220-4605075 1 Screw
2 4х36.019 ГОСТ 397-79 1 Cotter pin
3 М20х1,5-6Н.04.019 ГОСТ 5919-73 2 Nut
4 142-4605076 2 Pin
5 70-4605317 2 Restraint
6 21А-1601150 4 Spring
7 50-4605027 2 Pin
8 54.38.619 2 Ring
9 М12-6gх25.88.35.019 ГОСТ 7796-70 6 Bolt
10 12 ОТ ОСТ 37.001.115-75 7 Washer
11 40-4605023-А2 2 Washer
12 80-4605021-01 1 Lever
13 70-4605032 2 Bush
14 70-4605308-Б 2 Bush
15 70-4605016-Б 1 Bracket
16 70-4605313 1 Pin
17 70-4605024-А 1 Pivot lever
18 2С65 ГОСТ 13940-86 1 Ring
19 50-4605069 1 Bush
20 А61.07.002 1 Spring
21 М12-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
22 С 12.01.019 ГОСТ 11371-78 1 Washer
23 70-4605240-А 1 Bracket
24 М12-6Н.6.019 ГОСТ 5915-70 1 Nut
25 70-4605023 1 Pivoting shaft
26 80-4605022-01 1 Lever
27 1220-4605168-Б 1 Shackle
28 А61.01.016-Б 1 Axle
29 А61.01.400 1 Fork
30 А61.01.600 1 Shaft
31 А61.01.014 1 Handle
32 А61.01.017 2 Bush
33 016-021-30-2-4 ГОСТ 18829-73/9833-73 1 Ring
34 142-4605431 2 Ring
35 142-4605404-Б 1 Pin
36 А61.02.003 1 Locknut
37 А61.03.002 2 Ring
А61.03.001-01 1 Pin Ø 25
38
А61.03.001-02 1 Pin Ø 22 (optional)

- 261 -
Fig. 46.2. Rear mounted attachment

- 262 -
Group 46. Hydraulic system
Subgroup 4605. Rear mounted attachment
(For tractors with power governor)
Fig. No. Pos.
Designation Q-ty Description
No.
46.2 39 А61.08.001-01 1 Chain (9 links)
А61.02.100-04 1 Screw (joint hole Ø 22.5)
40
А61.02.100-05 1 Screw (joint hole Ø 25.7)
41 А61.05.000 1 Locking pin with ring
42 142-4605413 1 Gear
43 А61.01.005 1 Axle
44 142-4605421 1 Gasket
45 1.3.Ц9.хр ГОСТ 19853-74 3 Greaser
46 142-4605415 1 Casing
47 142-4605402 1 Bush
48 142-4605407 1 Pipe
1220-4605050 or Rod
49 2
1220-4605050-01 Rod (with chain)
1220-4605040 or Rod (joint b=38 mm)
50 2
1220-4605040-02 Rod (joint b=45 mm)
51 142-4605406 1 Cap
52 142-4605401 1 Restraint
53 1220-4605100 1 Fork
54 А61.07.001 3 Cotter pin
55 50-3503071 2 Washer
56 1220-4605025 1 Cross-bar
57 1220-4605084 2 Pin
58 5х36.019 ГОСТ 397-79 2 Cotter pin
59 70-4605316 2 Nut
60 1220-4605108-01 2 Lug
61 3,2х18.019 ГОСТ 397-79 8 Cotter pin
62 М12-6Н.04.019 ГОСТ 5919-73 8 Nut
63 50-4605086 8 Bolt
64 А61.09.002 8 Shackle
65 1220-4605058 2 Screw (М20)
66 М20-6Н.6.019 ГОСТ 5915-70 2 Nut
67 А61.04.003-01 2 Brace
68 1220-4605058-01 2 Screw (М20 – left thread)
69 40-4605098 2 Ring
80-4605091 Right bracket
70 1
80-4605091-01 Left bracket
71 М16х1,5-6Н.6.019 ГОСТ 5915-70 16 Nut
72 16 ОТ ОСТ 37.001.115-75 12 Washer
73 Н50-4605060 1 Chain with ring
74 1220-4605200 1 Fork
75 142-4605424 1 Locknut
76 142-4605422 1 Brace
77 А61.03.102 1 Handle
78 А61.03.101 1 Pipe
79 А61.02.100-02 1 Screw (left thread)
80 А61.10.001-02 1 Pin
81 70-4605330-Б 1 Shackle
82 70-4605302-Б 1 Spring
83 А61.10.001 1 Pin
84 70-4605320 1 Bolt
85 70-4605036 5 Bolt
86 20 ОТ ОСТ 37.001.115-75 5 Washer
87 70-4605304-Б 1 Washer
88 А61.05.005 2 Locking pin
89 А61.05.004 2 Ring

- 263 -
Fig. 46.2. Rear mounted attachment

- 264 -
Group 46. Hydraulic system
Subgroup 4605. Rear mounted attachment
(For tractors with power governor)
Fig. No. Pos.
Designation Q-ty Description
No.
46.2 90 142-4605408 2 Bolt
М16-6gх40.88.35.019 ГОСТ 7796-70 2 Bolt
92 142-4605418-Б 1 Cover
93 142-4605403 1 Restraint
94 142-4605425 1 Pipe
95 8210 ГОСТ 7872-89 1 Bearing
96 5х45.019 ГОСТ 397-79 2 Cotter pin
97 А04.02.020 2 Nut
98 80-4605068 2 Washer
99 822-4605060 2 Tip
100 822-4605065 1 Cross-bar
101 822-4605070 1 Pin assembly

- 265 -
Fig.46.3. Rear mounted attachment (if the tractor is equipped with a hydraulic host)

- 266 -
Group 46. Hydraulic mounted system
Subgroup 4605. Rear mounted attachment (if the tractor is equipped with a hydraulic
host)

Fig. No. Pos.


Designation Q-ty Description
No.
46.3 822-4605010 1 Mounted system (1-66,68-79)
А61.03.000 1 Upper rod (28,52-57)
Pin pos.54 22 mm
А61.03.000-01* 1 Upper rod (28,52-57)
Pin pos.54 25 mm
80-4605690* 1 Upper rod (28,52-56,67)
1220-4605150-Б-01 1 Adjustable brace (13,21-26,49-51,
58-74)
1220-4605610-01 1 Adjustable brace (for solid rod)
1220-4605012-Б 1 Brace (17-20)
1220-4605612-01* 1 Screwed brace (for solid rod)
1220-4605030-Б-02 2 Rod (1,15,16,78,79) b=38 mm
1220-4605030-Б-04* 2 Rod (1,15,16,78,79) b=45 mm
1220-4605580 2 Brace (6-9)
822-4605085 1 Cross-bar (75,81-86)
80-4605280 2 Telescopic drawbar (89-91)
1 1220-4605108-01 2 Lug
2 3,2х25.019 ГОСТ 397-79 8 Cotter pin
3 М12-6Н.04.019 ГОСТ 5919-73 8 Nut
4 50-4605086 8 Bolt
5 А61.09.002 8 Shackle
6 1220-4605058 2 Screw
7 М20-6Н.04.019 ГОСТ 5916-70 2 Nut
8 А61.04.003-01 2 Brace
9 1220-4605058-01 2 Screw
10 40-4605098 2 Ring
11 80-4605091 1 Right bracket
80-4605091-01 1 Left bracket
12 М16х1,5-6Н.6.019 ГОСТ 5915-70 8 Nut
13 16 ОТ ОСТ 37.001.115-75 16 Washer
14 Н50-4605060 2 Chain with ring
15 1220-4605050-Б-01 2 Rod (with chain)
16 1220-4605040 2 Rod (joint b=38 mm)
1220-4605040-02* 2 Rod (joint b=45 mm)
17 1220-4605200-Б 1 Fork
1220-4605620-Б* 1 Fork (for solid rod)
18 142-4605424 1 Locknut
19 142-4605422 1 Brace
20 1220-4605075 1 Screw
21 142-4605403 1 Restraint
22 А61.01.005 1 Axle
23 142-4605421 1 Gasket
24 142-4605418-Б 1 Cover
25 142-4605408 2 Bolt
26 1220-4605668-Б 1 Shackle
27 1220-4605501 1 Right bracket
28 А61.02.100-03 1 Screw
29 А61.05.005 1 Locking pin
30 А61.05.004 1 Ring
31 А61.10.001-02 1 Pin
32 1220-4605502 2 Bush
33 1220-4605504 2 Plate
34 12 ОТ ОСТ 37.001.115-75 4 Washer
35 М12-6gх25.88.35.019 ГОСТ 7796-70 4 Bolt
36 1220-4605503 2 Pin
37 70-2800016-01 2 Bolt
* optionally

- 267 -
Fig.46.3. Rear mounted attachment (if the tractor is equipped with a hydraulic host)

- 268 -
Group 46. Hydraulic mounted system
Subgroup 4605. Rear mounted attachment (if the tractor is equipped with a hydraulic
host)

Fig. No. Pos.


Designation Q-ty Description
No.
46.3 38 1220-4605506 6 Bolt
1220-4605507 2 Pin
40 1220-4605501-01 1 Left bracket
41 М20х1,5-6Н.04.019 ГОСТ 5919-73 2 Nut
42 142-4605076 2 Pin
43 1220-4605675 1 Bracket
44 50-4605069 1 Bush
45 М12-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
46 С 12.01.019 ГОСТ 11371-78 1 Washer
47 А61.07.002 1 Spring
48 М12-6Н.6.019 ГОСТ 5915-70 1 Nut
49 А61.01.016 1 Axle
50 А.61.01.600 1 Shaft
51 А61.01.400 1 Fork
52 А61.03.100 1 Pipe
53 А61.02.003 1 Locknut
54 А61.03.001-02 1 Pin 22 mm
А61.03.001-01* 1 Pin 25 mm
55 А61.03.002 2 Ring
56 А61.02.100-04 1 Screw with a hole in the joint 22 mm
А61.02.100-05* 1 Screw with a hole in the joint 25 mm
57 А61.05.100 1 Locking pin (9 links)
58 А61.01.014 1 Handle
59 М16-6gх40.88.35.019 ГОСТ 7796-70 2 Bolt
60 А61.01.017 2 Bush
61 016-021-30-2-4 ГОСТ 18829-73/9833-73 1 Ring
62 142-4605431 2 Ring
63 142-4605404-Б 1 Pin
64 142-4605413 1 Gear
65 142-4605425 1 Pipe
66 8210 ГОСТ 7872-89 1 Bearing
67 80-4605685* 1 Gripping device
68 1.3.Ц9.хр ГОСТ 19853-74 1 Greaser
69 142-4605415 1 Casing
70 142-4605402 1 Bush
71 142-4605407 1 Pipe
72 142-4605406 1 Cap
73 142-4605401 1 Restraint
74 1220-4605100-Б 1 Fork
1220-4605615 1 Fork (for solid rod)
75 А61.07.001 3 Cotter pin
76 50-3503071 2 Washer
77 1220-4605084 2 Pin L=130 mm
1220-4605084-01 2 Pin L=100 mm (for solid rod)
78 5х36.019 ГОСТ 397-79 2 Cotter pin
79 70-4605316 2 Nut
80 1220-4605025 1 Cross-bar
81 5х45.019 ГОСТ 397-79* 2 Cotter pin
82 А04.02.020* 2 Nut
83 80-4605068* 2 Washer
84 822-4605060* 2 Tip
85 822-4605065* 1 Cross-bar
86 822-4605070* 1 Pin assembly
* Optionally

- 269 -
Fig.46.3. Rear mounted attachment (if the tractor is equipped with a hydraulic host)

- 270 -
Group 46. Hydraulic mounted system
Subgroup 4605. Rear mounted attachment (if the tractor is equipped with a hydraulic
host)

Fig. No. Pos.


Designation Q-ty Description
No.
46.3 87 1220-4605630-04* 1 Right rod without chain
1220-4605630-05* 1 Right rod with chain with gripping devices
1220-4605635-04* 1 Left rod without chain
1220-4605635-05* 1 Left rod with chain
88 1220-4605108* 2 Lug
89 80-4605285-Б* 2 Pipe
90 80-4605284* 2 Screw
91 80-4605292* 2 Latch
92 1220-4605530-04* 2 Rod without chain b=38 mm
1220-4605530-05* 2 Rod with chain b=38 mm
1220-4605530-06* 2 Rod without chain b=45 mm
1220-4605530-07* 2 Rod with chain b=45 mm
* Optionally

- 271 -
Fig. 46.4. External interlock of the lower rods
- 272 -
Group 46. Hydraulic mounted system
Subgroup 4605. External interlock of the lower rods

Fig. No. Pos.


Designation Q-ty Description
No.
46.4 А61.04.000 2 Brace (17-20)
40-4605098 2 Ring
2 Ф50-4605026 1 Axle
3 Ф50-4605097 2 Bush
4 Ф50-4605020 2 Bracket
5 80-4605091 1 Left bracket
80-4605091-01 1 Right bracket
6 50-4609082 8 Pin
7 М16х1,5-6H.6.019 ГОСТ 5918-73 16 Nut
8 М16-6gх40.88.35.019 ГОСТ 7796-70 8 Bolt
9 16 ОТ ОСТ 37.001.115-75 16 Washer
10 А61 07 001 2 Cotter pin
11 Ф50-4605084 2 Pin
12 С 18.01.019 ГОСТ 11371-78 4 Washer
13 Ф50-4605047-А2 2 Bush
14 3,2х18.019 ГОСТ 397-79 8 Cotter pin
15 М12-6Н.04.019 ГОСТ 5919-73 8 Nut
16 50-4605086 8 Bolt
17 А61.04.002 2 Screw
18 М18-6Н.04.019 ГОСТ 5916-70 2 Nut
19 А61.04.003 2 Brace
20 А61.04.002-01 2 Screw
21 А61.09.002 8 Shackle

- 273 -
Fig. 46.5. Telescopic drawbar

- 274 -
Group 46. Hydraulic mounted system
Subgroup 4605. Telescopic drawbar

Fig. No. Pos. Number of the assembly


Q-ty Description
No. unit or part
46.5 80-4605280 2 Telescopic drawbar (1-13)
1 80-4605281 2 Fork
80-4605283 or 2 Axle (L=75 mm)
2
16х80 ОСТ 37.001.163-75 2 Pin
3 80-4605282 2 Shackle
4 50-4609018 2 Spring
5 80-4605293 2 Plate
6 80-4605289 2 Handle
7 80-4605290 2 Locking pin
8 80-4605285-Б 2 Pipe
9 80-4605288-Б 2 Slider
10 С 12.01.019 ГОСТ 11371-78 2 Washer
11 80-4605284 2 Screw
12 3,2х25.019 ГОСТ 397-79 2 Cotter pin
13 16 ОТ ОСТ 37.001.115-75 2 Washer

- 275 -
Fig.46.6. Hydraulic system Р85-4600015
- 276 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic system Р85-4600015

Fig. Pos. Number of the assembly unit or part Q-ty Description


No. No.
46.6 Р85-4600015-02 Hydraulic system
1 Р85-4607110 1 Pipe
2 Р85-4607425 1 Pipe
4 Р1221-4607030 1 Bracket
7 Р1221-4607260 1 Rod
8 Р1221-4607260-01 2 Rod
10 952-4607080 1 Connecting pipe
11 952-4607140 1 High-pressure hose pipe 16х2 reinforced
13 680-4607140-04 1 High-pressure hose pipe 10 х1 reinforced
15 80-4604010 1 Pump drive
16 85-4604030 1 Fork
17 85-4604040-Б 1 Shaft
18 85-4607435 1 Bracket
19 85-4608010 1 Hydraulic system casing
20 85-4607060-Б 1 Pipe
21 85-4607080-Б 1 Pipe
23 80-4607040-04 1 Bracket
24 Д80-4607100 1 Branch pipe
29 А61-030-А1 3 Pin
30 Н.036.12.010 5 Choke
31 ПН.036.83.040 3 High-pressure hose pipe 10х1 reinforced
32 М036.50Б.10 4 Left casing
34 НШ32Д-3 or 1 Gear pump
НШ32УКФ-3
35 РП70-1221 С 1 Distributor
36 ХС-31 2 Clamp
39 Р85-4607063 1 Hose pipe 25х35-1,6 GOST10362-76
(L=90±1)mm
41 952-4607061 2 Connecting pipe
43 36-1022054-А 1 Gasket
44 1221-1802091 3 Threaded plug
45 70-3401093 3 Lever tip
46 85-3407101 2 Branch pipe
49 70-4604037 1 Gasket
55 70-4607144 6 Washer
57 50-4607032-Б 1 Bracket
58 50-4607096-А 1 Branch pipe
59 50-4607097 4 Gasket
60 50-4607099 1 Cover
63 40-4607032 4 Clamping bolt
65 40-4607037 1 Bolt
69 80-4608019 1 Cover
70 85-4608021 2 Plug
71 70-1405089 1 Male pipe adapter
72 70-4608033 3 Gasket
77 530-4614029 4 Angle piece
79 Д18-051 2 Bolt
84 Н.036.04.011 1 Screw-in connecting pipe
90 М8-6gх16.88.35.019 ГОСТ 7796-70 2 Bolt
91 М8-6gх20.88.35.019 ГОСТ 7796-70 4 Bolt
92 М8-6gх25.88.35.019 ГОСТ 7796-70 18 Bolt

- 277 -
Fig.46.6. Hydraulic system Р85-4600015
- 278 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic system Р85-4600015

Fig. Pos. Number of the assembly unit or part Q-ty Description


No. No.
46.6 93 М8-6gх30.88.35.019 ГОСТ 7796-70 6 Bolt
97 М10-6gх20.88.35.019 ГОСТ 7796-70 3 Bolt
98 М10-6gх30.88.35.019 ГОСТ 7796-70 1 Bolt
99 М10-6gх40.88.35.019 ГОСТ 7796-70 2 Bolt
101 М12-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
103 М8-6Н.6.019 ГОСТ 5915-70 4 Nut
104 М10-6Н.6.019 ГОСТ 5915-70 5 Nut
106 С 8.01.019 ГОСТ 11371-78 4 Washer
107 М10 3р/6gх20.66.019 ГОСТ 22034-76 3 Pin
108 М10 3р/6gх35.66.019 ГОСТ 22034-76 2 Pin
112 013-017-25-1-4 ГОСТ 18829-73/9833-73 1 Ring
113 017-022-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
114 021-024-19-2-2 ГОСТ 18829-73/9833-73 1 Ring
115 021-025-25-1-4 ГОСТ 18829-73/9833-73 2 Ring
117 035-040-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
120 3,2х18.019 ГОСТ 397-79 6 Cotter pin
123 8Т ОСТ 37.001.115-75 30 Washer
124 10 ОТ ОСТ 37.001.115-75 11 Washer
125 12 ОТ ОСТ 37.001.115-75 2 Washer
128 1,0-О-С ГОСТ 3282-74 1 Wire (250х3) mm
133 4600.18 4 Washer РМ14
134 4600.20 12 Washer РМ1/2
135 4600.22 2 Washer РМ24

- 279 -
Fig.46.7. Hydraulic system Р90-4600010
- 280 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic system Р90-4600010
Fig. Pos. Number of the assembly unit or part Q-ty Description
No. No.
46.7 Р90-4600010-04 Hydraulic system
1 Р85-4600015-02 1 Hydraulic system casing
2 Р85-4607010 1 Pipe
3 1221-3407090 1 Oil pipeline
4 80-4607200 1 Pipe
8 680-4607140-05 3 High-pressure hose pipe ф10 х1 reinforced
9 П100-4607140-01 2 High-pressure hose pipe ф10х1 reinforced
10 70-4607270-А 1 Bracket
11 С80-4607380 1 Pipe
12 80-4607455 1 Bolt
13 М036.50Б.10 2 Left casing
14 Н.036.65.000-А2-06 1 Slowing-down valve
15 Ц100х200-3 1 Hydraulic cylinder Ц100х200-3
16 ХС-21 2 Clamp
18 Д80-4607063 1 Hose
23 С80-4607204 1 Connecting pipe
24 М80-4607014 1 Bracket
26 М80-4607017 2 Bracket
27 М80-4607018 1 Bracket
28 Е1021-4607044 1 Bush
30 70-4607156 1 Slat
31 70-4607168 2 Plates
32 40-4607032 1 Clamping bolt
35 50-4608049 2 Gasket
36 40-4607029-А 4 Slat
39 70-4607161-А 1 Slat
40 70-4608072 1 Plate
43 70-3506027 1 Bush
44 70-1405089 1 Male pipe adapter
46 Д18-051 2 Bolt
48 М8-6gх40.88.35.019 ГОСТ 7795-70 2 Bolt
49 М8-6gх45.88.35.019 ГОСТ 7795-70 1 Bolt
51 М8-6gх30.88.35.019 ГОСТ 7796-70 1 Bolt
52 М8-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
53 М10-6gх25.88.35.019 ГОСТ 7796-70 3 Bolt
55 М12-6gх30.88.35.019 ГОСТ 7796-70 1 Bolt
56 М14х1,5-6gх45.88.35.019 ГОСТ 7796-70 4 Bolt
58 М8-6Н.6.019 ГОСТ 5915-70 3 Nut
59 М10-6Н.6.019 ГОСТ 5915-70 3 Nut
61 017-022-30-1-4 ГОСТ 18829-73/9833-73 2 Ring
62 024-028-25-1-4 ГОСТ 18829-73/9833-73 1 Ring
66 8Т ОСТ 37.001.115-75 5 Washer
67 10 ОТ ОСТ 37.001.115-75 3 Washer
68 12 ОТ ОСТ 37.001.115-75 1 Washer
85 4600.18 4 Washer РМ14
86 4600.20 4 Washer РМ1/2
М036.50Б.20 6 Right casing (to be put into the spare parts
and accessories kit)

- 281 -
Fig.46.8. Hydraulic system Р1221-4600010

- 282 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic units and fittings

Fig. Pos. Number of the assembly unit or part Q-ty Description


No. No.
46.8 Р1221-4600010-02 1 Hydraulic system
1 Р1221-4600015-02 1 Hydraulic system casing
3 85-4607034 1 Connecting pipe
5 К1221-4607125 1 Pipe
6 680-4607140-03 2 High-pressure hose pipe 10 х1 reinforced
7 952-4607140-04 1 High-pressure hose pipe 16х2 reinforced
8 С80-4607380 1 Pipe
10 80-4607455 1 Bolt
12 М036.50Б.10 5 Left casing
13 П100-4607140-01 2 High-pressure hose pipe 10х1 reinforced
15 ХС-21 2 Clamp
16 ХС-31 2 Clamp
18 К1221-4607011 1 Hose
20 П80-4607012 1 Hose
21 П80-4607013 3 Clamp
22 П80-4607013-01 1 Clamp
24 М80-4607014 2 Bracket
26 П80-4607016 1 Connecting pipe
27 М80-4607017 2 Bracket
28 М80-4607018 2 Bracket
29 Е1021-4607044 1 Bush
30 85-4607431 1 Bracket
31 70-4607156 2 Slat
37 40-4607029-А 5 Slat
38 40-4607038-А-01 or 2 Washer
РМ 1/2
40 1321-3407022 1 Bracket
42 70-3407163-01 1 Cramp
43 70-3506027 1 Bush
47 М8-6gх40.88.35.019 ГОСТ 7795-70 2 Bolt
48 М8-6gх45.88.35.019 ГОСТ 7795-70 2 Bolt
50 М8-6gх25.88.35.019 ГОСТ 7796-70 1 Bolt
51 М8-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
53 М10-6gх25.88.35.019 ГОСТ 7796-70 5 Bolt
54 М10-6gх30.88.35.019 ГОСТ 7796-70 1 Bolt
55 М12-6gх30.88.35.019 ГОСТ 7795-70 1 Bolt
58 М8-6Н.6.019 ГОСТ 5915-70 5 Nut
59 М10-6Н.6.019 ГОСТ 5915-70 6 Nut
61 021-024-19-2-2 ГОСТ 18829-73/9833-73 1 Ring
62 027-032-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
64 С 10.01.019 ГОСТ 11371-78 1 Washer
66 8Т ОСТ 37.001.115-75 7 Washer
67 10 ОТ ОСТ 37.001.115-75 6 Washer
68 12 ОТ ОСТ 37.001.115-75 1 Washer
М036.50Б.20 6 Right casing (to be delivered complete with
the tractor)

- 283 -
Fig.46.9. Hydraulic system casing Р1221-4600010

- 284 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic units and fittings

Fig. No. Pos. Number of the assembly unit or part Q-ty Description
No.
46.9 Р1221-4600015-02 1 Hydraulic system casing
1 80-4604010 1 Pump drive
2 85-4604030 1 Fork
3 85-4604040 1 Switch-off handle
5 Р1221-4607030 1 Bracket
6 80-4607040-04 1 Bracket
8 Р1221-4607050 1 Pipe
9 85-4607060-Б 1 Pipe
10 85-4607080-Б 1 Pipe
12 952-4607080 2 Connecting pipe
14 Д80-4607100 1 Branch pipe
16 680-4607140-04 1 High-pressure hose pipe 10х1 reinforced
18 952-4607140 1 High-pressure hose pipe 16х2 reinforced
20 Р1221-4607260 1 Rod
21 Р1221-4607260-01 2 Rod
23 80В-4607375 1 Pipe
25 85-4608010 1 Hydraulic system casing
26 А61-030-А1 3 Pin
27 Н.036.12.010 4 Choke
28 М036.50Б.10 4 Left casing
29 ПН.036.83.040 3 High-pressure hose pipe 10х1 reinforced
НШ32М-3 1 Gear pump (additionally substituted for
31
pos.123 or pos.124 or pos.125)
32 РП70-1221 1 Distributor
33 ХС-26 2 Clamp
35 36-1022054-А 1 Gasket
37 70-3401093 3 Lever tip
38 85-3407101 2 Branch pipe
40 70-4604037 1 Gasket
41 50-4604044 1 Plate
42 50-4604046 1 Fork bolt
45 40-4607033-А-01 or 6 Washer
РМ 24
46 40-4607037 3 Bolt
47 40-4607038-А-01 or 12 Washer
РМ 1/2
50 50-4607032-Б 1 Bracket
53 50-4607096-А 1 Branch pipe
54 50-4607097 4 Gasket
55 50-4607099 1 Cover
56 70-4607144 6 Washer
57 М80-4607011 1 Hose
59 952-4607061 2 Connecting pipe
64 70-4608019 1 Cover
65 85-4608021 2 Plug
66 70-4608033 3 Gasket
68 50-4608027-В 1 Plug
70 530-4614029 4 Angle piece
73 Н.036.04.011 1 Screw-in connecting pipe
80 М8-6gх16.88.35.019 ГОСТ 7796-70 2 Bolt
81 М8-6gх20.88.35.019 ГОСТ 7796-70 4 Bolt
82 М8-6gх25.88.35.019 ГОСТ 7796-70 20 Bolt
83 М8-6gх30.88.35.019 ГОСТ 7796-70 4 Bolt

- 285 -
Fig.46.9. Hydraulic system casing Р1221-4600010
- 286 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic units and fittings

Fig. No. Pos. Number of the assembly unit or part Q-ty Description
No.
46.9 89 М10-6gх20.88.35.019 ГОСТ 7796-70 4 Bolt
90 М10-6gх30.88.35.019 ГОСТ 7796-70 1 Bolt
91 М10-6gх40.88.35.019 ГОСТ 7796-70 2 Bolt
93 М12-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
95 М8-6Н.6.019 ГОСТ 5915-70 4 Nut
96 М10-6Н.6.019 ГОСТ 5915-70 5 Nut
98 М10 3р/6gх20.66.019 ГОСТ 22034-76 3 Pin
99 М10 3р/6gх35.66.019 ГОСТ 22034-76 2 Pin
101 3,2х18.019 ГОСТ 397-79 6 Cotter pin
103 013-017-25-1-4 ГОСТ 18829-73/9833-73 1 Ring
104 017-022-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
105 021-024-19-2-2 ГОСТ 18829-73/9833-73 1 Ring
106 021-025-25-1-4 ГОСТ 18829-73/9833-73 2 Ring
108 035-040-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
111 С 8.01.019 ГОСТ 11371-78 4 Washer
114 8Т ОСТ 37.001.115-75 30 Washer
115 10 ОТ ОСТ 37.001.115-75 12 Washer
116 12 ОТ ОСТ 37.001.115-75 2 Washer
120 1,0-О-С ГОСТ 3282-74 3 Wire (250 mm)
НШ32МА-3 1 Gear pump (additionally substituted for
123
pos.31 or pos.124 or pos.125)
НШ32Д-3 1 Gear pump (additionally substituted for
124
pos. 31 or pos.123 or pos.125)
НШ32УКФ-3 1 Gear pump (additionally substituted for
125
pos.31 or pos.123 or pos.124)

- 287 -
Fig.46.10. Hydraulic system 80-4600010-Б

- 288 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic units and fittings

Fig. No. Pos.


Designation Q-ty Description
No.
46.10 1 М8-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
2 8Т ОСТ 37.001.115-75 23 Washer
3 М8-6gх30.88.35.019 ГОСТ 7796-70 5 Bolt
4 80-4608019-01 1 Cover
5 70-4608033-01 1 Gasket
6 М8-6Н.6.019 ГОСТ 5915-70 3 Nut
7 80Х-4607120 1 Pipe
8 40-4607032 6 Bolt
9 40-4607038-А-01 or 12 Washer
РМ 1/2
10 80-4607165 1 Pipe
11 40-4607018-01 1 Gasket
12 М8х110 3 Bolt
13 ХС-31 or
2 Clamp
“NORMA” TORRO 25-40/9-C6W
14 85-4607063 1 Draining hose
15 85-4607425 1 Angle piece with a connecting pipe
16 80-4607142 1 Connecting pipe
17 Д18-055А-01 or Seal ring
4
РМ 14 Washer
18 Д18-051 2 Bolt
19 80-4607119 1 Bracket
20 80-1607110 1 Pipe
21 80-4607115-Б 1 Pipe
22 80-4607175 1 Pipe
23 1221-1802091 1 Plug (auxiliary)
24 80-4607320-Б 1 Bracket
25 80-4607310-А 1 Pipe
26 80-4607075А 1 Pipe (for the pump НШ32А-3)
80-4607075Б 1 Pipe (for the pump НШ32М-3, etc.)
27 М8-6gх25.88.35.019 ГОСТ 7796-70 17 Bolt
28 035-040-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
НШ32А-3 or НШ32М-3 or НШ32МА-3
29 or НШ32Д-3 or НШ32УВ-3 or 1 Pump
НШ32УКФ-3
30 50-4607097-01 4 Gasket
31 70-4607096-А 1 Branch pipe (for the pump НШ32А-3)
Branch pipe (for the pump НШ32М-3,
50-4607096-А 1
etc.)
32 80Х-4607130 1 Pipe
33 М8-6gх20.88.35.019 ГОСТ 7796-70 2 Bolt
34 017-022-30-1-4 ГОСТ 18829-73/9833-73 4 Ring
35 3057-4616330-А 4 Locking device valve (Ø12), left
36 50-4607039-А 4 Cap
37 40-4607033-А-01 or 2 Washer
РМ 24
38 40-4607037 1 Bolt
39 Р80-3/4-222-ЗГг 1 Distributor

- 289 -
Fig.46.11. Hydraulic units and fittings (with power governor).

- 290 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic units and fittings.
(with power governor)
Fig. No. Pos.
Designation Q-ty Description
No.
46.11 40-4607065-А 2 Hitch hose (37-39)
1 Н80-4607160 1 Oil pipeline
2 Н80-4607170 1 Oil pipeline
3 Н80-4607206 1 Bracket
4 70-3407146 4 Slat
5 80-4607180 1 Pipe (with the pump НШ32А-3)
80-4607180-Б 1 Pipe (with the pump НШ32М-3, etc.)
6 70-3506027 9 Bush
7 80-4607169 1 Bracket
8 70-4607270-А 1 Bracket
9 Н80-4607150 1 Oil pipeline
10 80-4607200 1 Pipe
11 М8-6Н.6.019 ГОСТ 5915-70 2 Nut
12 8Т ОСТ 37.001.115-75 10 Washer
13 М8-6gх40.88.35.019 ГОСТ 7795-70 2 Bolt
14 70-4607156 1 Slat
15 М8-6gх45.88.35.019 ГОСТ 7795-70 2 Bolt
16 70-4607400-Б 1 Pipe
17 70-4607395-Б 1 Pipe
18 80-4614020 1 Governor
19 85-4607440 1 Bracket
20 017-022-30-1-4 ГОСТ 18829-73/9833-73 10 Ring
21 3057-4616330-А 2 Locking device valve
22 50-4607039-А 2 Cap
23 М8-6gх20.88.35.019 ГОСТ 7796-70 2 Bolt
24 70-1405089 3 Connecting pipe
25 Н.036.65-000-06-А2 1 Valve
26 680-4607140-05 2 Hose pipe (to be used with Ц100)
680-4607140-12 2 Hose pipe (to be used with Ц110)
27 40-4607038-А or 12 Washer
РМ 1/2
28 40-4607032 6 Bolt
29 Д18-055А-01 or 4 Ring
РМ 14 Washer
30 Д18-051-01 2 Bolt
31 М8-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
32 80-4607190-Б 1 Pipe
33 80-4607175 1 Pipe
34 80-4607310-А 1 Pipe
35 80-4607110 1 Pipe
36 80-4607115-Б 1 Pipe
37 Н.036.83.090 2 Hose pipe (optional)
38 Н. 036.02.002 2 Connecting pipe (optional)
39 Н.036.83.110 2 Hose pipe (optional)

- 291 -
Fig.46.12. Hydraulic units and fittings (with hydraulic lift and distributor RS 213 MITA)

- 292 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic units and fittings
(with hydraulic lift and distributor RS 213 MITA)

Fig. No. Pos.


Designation Q-ty Description
No.
46.12 1 C80-4607130 1 Pipe
2 С80-4607120 1 Pipe
3 017-022-30-1-4 ГОСТ 18829-73/9833-73 5 Ring
4 М036.506.10 4 Left casing
5 М8-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
6 М8-6gх30.88.35.019 ГОСТ 7796-70 3 Bolt
7 8Т ОСТ 37.001.115-75 32 Washer
8 М8-6gх20.88.35.019 ГОСТ 7796-70 3 Bolt
9 80-4608019-01 1 Cover
10 70-4608033-01 1 Gasket
11 М8-6Н.6.019 ГОСТ 5915-70 7 Nut
12 40-4607037 2 Bolt
13 40-4607033-А-01 or 4 Washer
РМ 24
С80-4607075-Б or Pipe (for НШ32А-3)
14 1
С80-4607075-Г Pipe (for НШ32М-3)
15 С80-4607165 1 Pipe
16 С80-4607030 1 Bracket
17 50-4607032-Б 1 Bracket
18 С80-4607063 1 Hose
ХС-21 or
19 2 Clamp
“NORMA” TORRO 16-25/9-C6W
20 С80-4607375 1 Pipe
21 М10-6gх20.88.35.019 ГОСТ 7796-70 4 Bolt
22 10 ОТ ОСТ 37.001.115-75 12 Washer
23 М8-6gх65.88.35.019 ГОСТ 7796-70 4 Bolt
24 С 8.01.019 ГОСТ 11371-78 4 Washer
25 40-4607038А-01 or 14 Washer
РМ 1/2
26 40-4607032 6 Bolt
27 С80-4607110 1 Pipe
28 1021-4607115 1 Pipe
29 С80-4607175 1 Pipe
30 80В-1108570 1 Bracket
31 50-4607031 1 Bolt
32 М8-6gх25.88.35.019 ГОСТ 7796-70 20 Bolt
33 035-040-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
34 НШ 32А-3 or 1 Gear pump
НШ 32М-3 or
НШ 32МА-3 or
НШ 32УКФ-3 or
НШ 32Д-3 or
НШ 32УВ-3
35 50-4607097-01 4 Gasket
70-4607096-А (for НШ 32А-3 only) or
36 1 Branch pipe
50-4607096-А
37 С80-4607380 1 Pipe
38 952-4607080* 1 Connecting pipe
39 50-4608027-В* 1 Plug
40 Д80-4607100* 1 Branch pipe
41 952-4607140* 1 High-pressure hose pipe
* Variant

- 293 -
Fig.46.13. Hydraulic units and fittings (if the tractor is equipped with a hydraulic host)

- 294 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic units and fittings
(if the tractor is equipped with a hydraulic host)
Fig. No. Pos.
Designation Q-ty Description
No.
46.13 1 Н80-4607206 1 Bracket
2 8Т ОСТ 37.001.115-75 7 Washer
3 М8-6gх30.88.35.019 ГОСТ 7796-70 1 Bolt
4 М14х1,5-6gх45.88.35.019 ГОСТ 7796-70 4 Bolt
5 70-4607168 2 Plate
6 50-4608049-01 2 Gasket
7 70-4608072 1 Plate
8 П80-4607012 1 Hose
9 RS 213 MITA 1 Hydraulic distributor
10 80-4607040-04 1 Hydraulic distributor control
11 40-4607037 1 Bolt
12 40-4607033-А-01 or 2 Washer
РМ 24
13 952-4607080 1 Connecting pipe
14 Н80-4607170 1 Oil pipeline
15 П80-4607120 1 Hose pipe
16 40-4607038-А-01 or 2 Washer
РМ 1/2
17 С80-4607380 1 Pipe
18 П80-4607013 3 Clamp
19 К1221-4607011 1 Hose
ХС-21 or
20 2 Clamp
“NORMA” TORRO 16-25/9-C6W
21 К1221-4607125 1 Pipe
22 70-3407163-01 1 Cramp
23 70-3506027 7 Bush
24 1321-3407022 1 Bracket
25 С 10.01.019 ГОСТ 11371-78 1 Washer
26 М10-6gх30.88.35.019 ГОСТ 7796-70 1 Bolt
27 М8-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
28 М036.50Б.10 3 Left casing
29 85-4607431 1 Bracket
30 М8-6Н.6.019 ГОСТ 5915-70 3 Nut
31 М10-6Н.6.019 ГОСТ 5915-70 1 Nut
32 10 ОТ ОСТ 37.001.115-75 1 Washer
33 М8-6gх25.88.35.019 ГОСТ 7796-70 1 Bolt
34 П80-4607016 1 Connecting pipe
35 021-024-19-1-4 ГОСТ 18829-73/9833-73 1 Ring
ХС-31 or
36 2 Clamp
“NORMA” TORRO 25-40/9-C6W
37 027-032-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
38 85-4607034 1 Connecting pipe
39 40-4607029-А 1 Slat
40 70-4607156 1 Slat
41 М8-6gх45.88.35.019 ГОСТ 7795-70 1 Bolt
42 Н80-4607150 1 Oil pipeline
43 70-3407146 2 Slat
44 М8-6gх40.88.35.019 ГОСТ 7795-70 1 Bolt
45 П80-4607013-01 1 Clamp
46 Н80-4607160 1 Oil pipeline
47 80-4607439 1 Bolt
48 КГ 1/4".А12.019 1 Plug

- 295 -
Fig.46.14. Hydraulic units and fittings of the hydraulic system with rope control of the
distributor (Joystick type)

- 296 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic units and fittings
of the hydraulic system with rope control of the distributor (Joystick type)

Fig. No. Pos.


Designation Q-ty Description
No.
46.14 1 680-4607140-04 4 Hose pipe left
2 952-4607140-01 1 Hose pipe
3 952-4607080 1 Connecting pipe
4 RS-213 “Belarus” 1 Sectional distributor
5 952-4607040 1 Bracket
6 Н.036.04.011 1 Connecting pipe
7 85-4608010 1 Hydraulic system casing
8 С80-4607425 1 Branch pipe
9 952-4607063 1 Hose
10 85-4607034 1 Connecting pipe
11 40-4607032 1 Bolt
12 952-4607310 1 Pipe
13 М80-4607017 2 Bracket
14 80-4607320-Б 1 Bracket
15 D80-4607100 1 Branch pipe
WL-1500 or
16 3 Cable
132-001
WK-20 or
17 1 Joystick
ТАИС.303654.001
18 С90-4607120 2 Plate
19 С90-4607026 1 Screw
20 С90-4607130 1 Lever
21 80-4614020 1 Governor
22 80-4607200 1 Pipe
23 80-4607190-Б 1 Pipe
24 680-4607140-06 1 Hose pipe
25 680-4607140-03 2 Hose pipe
26 80-4604010 1 Pump drive
27 3 Cage
28 3 Shell
29 М036.50Б.010 6 Left casing
30 40-4607038-А or 4 Washer
РМ 1/2
31 D18-055А or 8 Seal ring
РМ 14 Washer
32 D18-051 4 Bolt

- 297 -
Fig.46.15. Hydraulic system casing and filter

- 298 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic system casing and filter

Fig. No. Pos.


Designation Q-ty Description
No.
46.15 85-4608010 1 Hydraulic system casing (1-49, 53, 54)
85-4608090 1 Valve (22-26)
A28.04.10.000 1 Valve (4-9)
1 A28.04.20.000-A1 1 Casing
2 042-050-46-2-4 ГОСТ 18829-73/9833-73 2 Ring
3 4600.30 1 Filtering element Regotmas 635-1
4 В.М6-6gх40.58.019 ГОСТ 17475-80 1 Screw
5 8.20.004 1 Valve
6 A28.04.10.001 1 Valve body
7 8.20.002 1 Spring
8 8.20.005 1 Washer
9 М6-6Н.6.019 ГОСТ 5915-70 2 Nut
10 A28.04.00.001 1 Restraint
11 М6-6Н.6.019 ГОСТ 5915-70 4 Nut
12 021-025-25-1-4 ГОСТ 18829-73/9833-73 1 Ring
13 85-4608021 1 Plug
14 85-4608089 1 Gasket
15 85-4607034 1 Connecting pipe
16 85-4608057 1 Spring
17 50-4608059 1 Breather plug
18 50-4608063 1 Filter
19 50-4608062 2 Breather washer
20 КГ 1 1/4" 1 Plug
21 A61-C06-A3 1 Filter
22 85-4608091 1 Valve
23 50-1002450 1 Chain
24 011-015-25-2-4 ГОСТ 18829-73/9833-73 2 Ring
25 36-1101067 2 Ring
26 50-3407069 1 Locking pin
29 85-4608086-A 1 Gasket
30 85-4608087 1 Indicator
31 85-4608088 1 Plate
32 6Т ОСТ 37.001.115-75 6 Washer
33 М6-6gх16.88.35.019 ГОСТ 7798-70 6 Bolt
34 М10 3р/6gх20.66.019 ГОСТ 2203 4-76 3 Pin
35 М8-6gх80.88.35.019 ГОСТ 7795-70 1 Bolt
36 М8-6gх25.88.35.019 ГОСТ 7796-70 5 Bolt
37 8Т ОСТ 37.001.115-75 30 Washer
38 85-4608022 1 Cover
39 130-135-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
40 85-4608018 1 Cage
41 027-032-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
42 М8-6gх20.88.35.019 ГОСТ 7796-70 23 Bolt
43 85-4608025 1 Cover
44 80-4608073 1 Bracket
45 85-4608031-Б 1 Gasket
46 85-4608016-A 1 Hydraulic system casing

- 299 -
Fig.46.15. Hydraulic system casing and filter
- 300 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic system casing and filter

Fig. No. Pos.


Designation Q-ty Description
No.
46.15 47 017-022-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
48 50-4608027-B 1 Plug
49 М10 3р/6gх35.66.019 ГОСТ 22034-76 2 Pin
М10-6Н.6.019 ГОСТ 5915-70 2 Nut
50 М10-6gх40.88.35.019 ГОСТ 7796-70 2 Bolt
10 ОТ ОСТ 37.001.115-75 4 Washer
51 50-4608049-01 1 Gasket
52 70-4608033 1 Gasket
53 80-4608019-01 1 Cover

- 301 -
Fig.46.16. Pump drive

- 302 -
Group 46. Hydraulic system
Subgroup 4604. Pump drive

Fig. No. Pos.


Designation Q-ty Description
No.
46.16 80-4604010 1 Pump drive (1-5, 11-14, 16-24)
36-1022070-Б (85-4604040) 1 Handle (6-10)
1 210 АУШ1 GOST8338-75 2 Bearing
2 85-4604017 1 Coupling
3 С40 ГОСТ 13943-86 2 Ring
4 70-1108179 1 Washer
5 11,112-100 ГОСТ 3722-81 3 Ball
6 4С3х16 1 Pin
7 36-1022074 1 Spring
8 36-1022073 1 Catch
9 36-1022072 1 Cage
10 36-1022071-Б 1 Handle
11 М8-6gх16.88.35.019 ГОСТ 7796-70 2 Bolt
12 8Т ОСТ 37.001.115-75 2 Washer
13 50-4604044 1 Plate
14 013-017-25-1-4 ГОСТ 18829-73/9833-73 1 Ring
16 85-4604012 1 Bush
17 50-4604036-А 1 Cage
18 36-1022054-А 1 Gasket
19 2С90 ГОСТ 13941-86 1 Ring
20 70-4604037 1 Gasket
21 80-4604032 1 Gear
22 1-0-С 1 Wire L=150 mm
23 50-4604046 1 Bolt
24 85-4604030 1 Fork

- 303 -
Fig.46.17. Hydraulic cylinder Ц 100x200

- 304 -
Group 46. Hydraulic system
Subgroup Ц 100. Hydraulic cylinder Ц 100x200

Fig. No. Pos.


Designation Q-ty Description
No.
46.17 1 70-4605041 2 Bush
2 С 20.01.019 ГОСТ 11371-78 2 Washer
3 70-4605036-01 2 Bolt
4 70-4605017-А 1 Bracket
5 70-4605034 2 Plate
6 70-4605036 2 Bolt
7 Ц100x200-3 1 Hydraulic cylinder
8 5х36.019 ГОСТ 397-79 1 Cotter pin
9 70-4619042 1 Washer
10 Ц90-1212037М 1 Pin
11 50-34 06022А 1 Ring

- 305 -
Fig.46.18. Hydraulic distributor Р80-3/4-222-ЗГг

- 306 -
Group 46. Hydraulic system
Subgroup Р80-3/4-222-З Гг. Hydraulic distributor Р80-3/4-222-З Гг

Fig. No. Pos.


Designation Q-ty Description
No.
46.18 Р80-3/4-222-З Гг 1 Hydraulic distributor (1-74)
P80-23.20.030 1 Sliding valve (60-74)
1 P80-23.30.421-А 1 Casing
2 P75-B-028-A 7 Gasket
3 P80-23.20.063 1 Socket
4 МКПВ-16/3Ф-101 1 Needle
5 МКПВ-16/ЗФ-104 1 Spring
6 P80-049 Б 1 Adjusting screw
7 017-022-30-2-2 ГОСТ 18829-73/9833-73 3 Ring
8 Р75-058-Б 1 Nut
9 Р75-051-В 1 Cap
10 8Т ОСТ 37.001.115-75 25 Washer
11 М8-6gх110.88.35.019 ГОСТ 7796-70 3 Bolt
12 М8-6gх100.88.35.019 ГОСТ 7796-70 6 Bolt
13 P80-23.20.123-Б 1 Bottom cover
14 P40/75-0808039-Б 1 Gasket
15 КГ 1/4".А12.019 ТУ 23.1.506-91 1 Plug
16 50-4608027-B 4 Choke
17 14,288-60 ГОСТ 3722-81 3 Ball
18 P80-23.20.007 3 Guide
19 P80-23.20.002 3 Spring
20 P80-23.20.003 3 Washer
21 024-028-25-1-4 ГОСТ 18829-73/9833-73 3 Ring
22 P80-23.20.004 2 Adapter
23 P75-090A 6 Choke (auxiliary)
24 P75-3-038 1 Gasket
25 P75-3-057 1 Plate of rings
26 М8-6gх20.88.35.019 ГОСТ 7796-70 8 Bolt
27 Р75-3-055-Б 1 Dust cap plate
28 Р75-056М 3 Dust cap
29 Р80-23.20.353-Г1 1 Nameplate
30 28.00-3,00 72 NBR 872 or 3 Ring
OR NBR 70 02750300 ISO 3601 or
028-033-30-2-2 ГОСТ 18829-73/9833-73
31 М12х1,25-6Н.04.019 ГОСТ 5916-70 3 Nut
32 12 ОТ ОСТ 37.001.115-75 3 Washer
33 Р75-054-Б 3 Lever
34 3x6,5 ГОСТ 24071-80 3 Key
35 Р80-23.20.065 3 Ring
36 Р80-23.20.064 3 Ring
37 2х6.01 ГОСТ 10299-80 2 Rivet
38 М8-6gх55.88.35.019 ГОСТ 7795-70 8 Bolt
39 М10-6gх25.88.35.019 ГОСТ 7796-70 2 Bolt
40 14 ОТ ОСТ 37.001.115-75 9 Washer
41 Р80-23.20.071.Б 1 Stop
42 Р80-23.20.022-А 1 Upper cover
43 31,42-2,62 88 NBR 156 or 1 Ring
032-037-30-2-2 ГОСТ 18829-73/9833-73
44 Р80-23.20.073 1 Guide
45 025-030-30-2-3 ГОСТ 18829-73/9833-73 1 Ring
46 P75-072 1 Spring
47 P75-B3BP-081-A 1 Valve
48 P75-B3BP-082 1 Spring

- 307 -
Fig.46.18. Hydraulic distributor Р80-3/4-222-ЗГг

- 308 -
Group 46. Hydraulic system
Subgroup Р80-3/4-222-ЗГг. Hydraulic distributor Р80-3/4-222-ЗГг

Fig. No. Pos.


Designation Q-ty Description
No.
46.18 49 P80-23P.20.085 1 Washer
50 P80-23P.20.084 1 Overflow valve
51 1,6.65Г.08.1 ГОСТ 11648-75 1 Washer
52 P80-23.20.043 1 Valve socket
53 85-4608021-Б 1 Plug
54 025-029-25-2-2 ГОСТ 18829-73/9833-73 1 Ring
55 М10-6Н.6.019 ГОСТ 5915-70 3 Nut
56 50-4607032-Б 1 Bracket
57 М10-6gх20.88.35.019 ГОСТ 7796-70 4 Bolt
58 P40/75-0808076 1 Seal
59 0,8-II-L250 ГОСТ 3282-74 1 Wire
60 P80-23.20.137 3 Plug
61 P75-033 3 Lower cage
62 P80-23.20.035 3 Spring
63 P75-034 3 Upper cage
64 P80-23.20.031 3 Fixture
65 P75-B-032 3 Spring
66 P75-B-029 3 Bush
67 6,350-100 ГОСТ 3722-81 9 Ball
68 P80-23.20-025 3 Booster
69 Р80.23.20.046-Б 3 Liner
70 P80-23.20.045 3 Plunger
71 P80-23.20.036 3 Spring
72 P80-23.20.027 3 Socket
73 P80-23.20.224 3 Sliding valve

- 309 -
Fig.46.19. Hydraulic distributor control Р80
- 310 -
Group 46. Hydraulic system
Subgroup 4607. Hydraulic distributor control Р80

Fig. No. Pos.


Designation Q-ty Description
No.
46.19 80-4607040 1 Bracket (1-23)
80-4607260-03 2 Rod (13, 16, 17) L=178mm
80-4607260-04 1 Rod (16-18) L=227 mm
1 85-4607017 1 Bracket
2 50-4607078-A 4 Bush
3 С18 ГОСТ 13940-86 3 Ring
4 С32 ГОСТ 13940-86 1 Ring
5 A61.01.014 3 Handle
6 85-4607041-A 1 Lever
7 85-4607042-A 1 Lever
8 85-4607041-A-01 1 Lever
9 А.8х30.65Г Chemical phosphate oil- 2 Pin
impregnated coating ГОСТ 14229-93
10 80-4607220 1 Shaft
11 70-4607144 6 Washer
12 3,2х18.019 ГОСТ 397-79 6 Cotter pin
13 80-4607087-01 2 Rod L=102 mm
14 A61-030-A1 6 Pin
15 50-4607086-A 3 Lever
16 A20.213-A 6 Fork
17 М8-6Н.6.019 ГОСТ 5915-70 6 Nut
18 80-4607087-02 1 Rod L=148 mm
19 80-4607230 1 Shaft
20 80-4607250 1 Shaft
21 М12-6gх30.88.35.019 ГОСТ 7796-70 2 Bolt
22 12 ОТ ОСТ 37.001.115-75 2 Washer
23 50-4607079-A1 2 Bush
24 М10-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
25 10 ОТ ОСТ 37.001.115-75 1 Washer

- 311 -
* Variant

Fig.46.20. Hydraulic distributor РП70

- 312 -
Group 46. Remote-cylinder hydraulic system
Subgroup РП70. Hydraulic distributor РП70

Fig. No. Pos.


Designation Q-ty Description
No.
46.20 РП70-888-000-MMM-20Р2 1 Hydraulic distributor
РП70-8-0-M 3 Distributor section (1-25, 45, 52, 53)
РП70-Р2 1 Cover (РП70-080, 26, 47, 50)
РП70-20 1 Cover (РП70-050, 46, 48, 49)
РП70-050 1 Pressure-relief valve (27-44)
РП70-060* 1 Bypass valve (8, 28, 29, 48, 61-63)
РП70-080 1 Choke (27, 48, 54, 55)
1 РП70-090 1 Pipe
2 Р16.3.10.10 1 Spring
3 РП70-026 1 Screw
4 РП70-018-01 1 Disk
5 РП70-033 1 Spring
6 5,556-100 ГОСТ 3722-81 3 Ball
8 017-020-19-2-2 ГОСТ 18829-73/9833-73 1(2*) Ring
9 РП70-024 1 Plug
10 РП70-027 1 Spring
11 РП70-023 1 Gate
12 РП70-031 1 Ring
13 РП70-042 2 Slat
14 6х18 ОСТ 37.001.163-75 2 Pin
15 2х40.019 ГОСТ 397-79 3 Cotter pin
16 РП70-032 1 Ring
17 РП70-011 1 Body
18 РП70-013 1 Sliding valve
19 030-034-25-2-2 ГОСТ 18829-73/9833-73 1 Ring
20 9,525-100 ГОСТ 3722-81 1 Ball
21 РП70-014 1 Fixture
22 016-020-25-2-2 ГОСТ 18829-73/9833-73 1 Ring
23 009-012-19-1-4 ГОСТ 18829-73/9833-73 1 Ring
24 РП70-016 1 Threaded fitting
25 РП70-018 1 Disk
26 РП70-012 1 Cover
27 018-021-19-2-4 GOST18829-73/9833-73 2 Ring
28 РП70-058 1 Ring
29 70-4609037 1 Spring
30 РП70-052-Б 1 Valve
31 РП70-054 1 Seat
32 РП70-051 1 Body
33 016-020-25-2-4 ГОСТ 18829-73/9833-73 1 Ring
34 МКПВ-16/3Ф-103 1 Spring
35 РП70-059 1 Screw
36 РП70-053 1 Connecting pipe
37 РП70-076 1 Nut
38 РП70-057 1 Cap
39 С 6.01.019 ГОСТ 11371-78 1 Washer
40 013-016-19-2-2 GOST18829-73/9833-73 3 Ring
41 РП70-058-02 1 Ring
42 МКПВ-16/3Ф-101 1 Needle
43 028-032-25-2-2 GOST18829-73/9833-73 1 Ring
* Variant for tractors equipped with power governor

- 313 -
*Variant

Fig.46.20. Hydraulic distributor РП70

- 314 -
Group 46. Remote-cylinder hydraulic system
Subgroup РП70. Hydraulic distributor РП70

Fig. No. Pos.


Designation Q-ty Description
No.
46.20 44 РП70-058-01 1 Ring
45 РП70-070 1 Bracket
46 РП70-012-01 1 Cover
47 036-040-25-2-2 ГОСТ 18829-73/9833-73 2 Ring
48 021-024-19-2-4 GOST18829-73/9833-73 2(1*) Ring
49 РП70-036 1 Plug
50 060-066-36-2-2 ГОСТ 18829-73/9833-73 2 Ring
or 60,00-3,50 SIMRIT 72 NBR 872
52 В.М5-6gх12.58.019 ГОСТ 17473-80 4 Screw
53 5Т ОСТ 37.001.115-75 4 Washer
54 РП70-081 1 Choke
55 РП70-058 1 Ring
56 РП70-037-02 4 Pin
57 М10-6Н.6.019 ГОСТ 5915-70 8 Nut
58 10 ОТ ОСТ 37.001.115-75 8 Washer
59 РП70-038 1 Nameplate
60 2х6.01.10кп.05 ГОСТ 10299-80 2 Rivet
61 РП70-062 1 Connecting pipe
62 РП70-061 1 Body
63 РП70-065 1 Valve
* Variant for tractors equipped with power governor

- 315 -
Fig.46.21. Hydraulic distributor control RS213 Mita, RS 213 Belarus, РП 70

- 316 -
Group 46. Hydraulic system
Subgroup 4607. Control of the hydraulic distributor RS 213 Mita, RS 213 Belarus, РП 70
Fig. No. Pos.
Designation Q-ty Description
No.
46.21 1 3,2х18.019 ГОСТ 397-79 9 Cotter pin
2 70-4607144 9 Washer
3 C80-4607086 3 Lever
4 М8-6Н.6.019 ГОСТ 5915-70 3 Nut
5 A20-213A 3 Fork
6 A61-030-A1 3 Pin
7 80-4607250 1 Shaft
8 50-4607078-A 4 Bush
9 80-4607230 1 Shaft
10 М12-6gх30.88.35.019 ГОСТ 7796-70 2 Bolt
11 12 ОТ ОСТ 37.001.115-75 2 Washer
12 М10-6gх35.88.35.019 ГОСТ 7796-70 1 Bolt
13 10 ОТ ОСТ 37.001.115-75 1 Washer
14 С18 ГОСТ 13940-86 3 Ring
15 85-4607017 1 Bracket
16 50-4607079-A1 2 Bush
17 А.8х30.65Г Chemical phosphate oil- 2 Pin
impregnated coating
ГОСТ 14229-93
18 C80-4607080-01 1 Lever
19 С32 ГОСТ 13940-86 1 Ring
20 70-3401093 3 Lever tip
21 C80-4607090 1 Lever
22 C80-4607080 1 Lever
23 80-4607220 1 Shaft
24 C80-4607261 2 Rod
Р1221-4607261*
25 C80-4607261-01 1 Rod
Р1221-46007261-01*
26 C80-4607088 3 Pin
* With the distributor РП 70

- 317 -
Fig.46.22. Quick-connection coupling

- 318 -
Subgroup М036.50Б. Quick-connection coupling

Fig. No. Pos. Number of the assembly Q-ty Description


No. unit or part
46.22 1 М036.50Б.20 or 1 Right casing
0.653.00 or
PPV3.1320.712
2 М036.50Б.10 or 1 Left casing
0.693.10 or
PPV3.1320.703

- 319 -
Fig. 46.23. Retention mechanism

- 320 -
Group 46. Hydraulic system
Subgroup 4619. Retention mechanism

Fig. No. Pos.


Designation Q-ty Description
No.
46.23 80-4619110 1 Retention mechanism (1-31)
М12-6gх30.88.35.019 ГОСТ 7796-70 5 Bolt
2 70-4619016 2 Locking plate
3 85-4619017-01 2 Pin
4 80-4619012-Б-01 1 Rod
5 3,2х18.019 ГОСТ 397-79 5 Cotter pin
6 12х48 ОСТ 37.001.163-75 1 Pin
7 70-4619033 1 Bracket
8 50-4605069-01 1 Bush
9 12х32 ОСТ 37.001.163-75 1 Pin
10 70-4619029-Б 1 Lever
11 80-4619019 1 Pin
12 80-4619134 1 Rod
13 85-4619035 1 Lever
14 С 8.01.019 ГОСТ 11371-78 1 Washer
15 85-4619036 1 Handle
16 70-3401093 1 Lever tip
17 М6-6gх14.88.35.019 ГОСТ 7798-70 1 Bolt
18 6Т ОСТ 37.001.115-75 1 Washer
19 С 6.01.019 ГОСТ 6958-78 1 Washer
20 50-4607082-А 1 Bush
21 А61.07.001 1 Cotter pin
22 70-4619042 2 Washer
23 85-4619014 2 Washer S=15 mm
24 80-4619128 1 Lever
25 50-1310158-Б 1 Spring
26 80-4619105 1 Rod
27 80-4619011 1 Gripping device
28 5х36.019 ГОСТ 397-79 1 Cotter pin
29 80-4619020 1 Plate
30 8Т ОСТ 37.001.115-75 2 Washer
31 М8-6gх16.88.35.019 ГОСТ 7796-70 2 Bolt

- 321 -
Fig. 46.24. Governor

- 322 -
Group 46. Hydraulic system
Subgroup 4614. Governor

Fig. No. Pos.


Designation Q-ty Description
No.
46.24 80П-4614210 1 Governor with bracket (1-68)
80-4614020 1 Governor (1-35, 47-62, 64-69)
80-4614030 1 Liner screw (54, 68)
80-4614040 1 Slide valve screw (50, 51, 53, 55-61)
80-4614070 1 Plunger (22-26)
80-4614090 1 Shutoff valve (8-13)
1 М10-6Н.6.019 ГОСТ 5915-70 2 Nut
2 10 ОТ ОСТ 37.001.115-75 12 Washer
3 011-016-30-2-4 ГОСТ 18829-73/9833-73 2 Ring
4 КГ 1/4".А12.019 1 Plug
5 80-4614087 1 Plug
6 018-022-25-2-3 ГОСТ 18829-73/9833-73 4 Ring
7 80-4614011-01 1 Body
8 80-4614091 1 Seat
9 7,938-100 ГОСТ 3722-81 1 Ball
10 80-4614093 1 Guide
11 80-4614094 1 Protective ring
12 014-017-19-2-4 ГОСТ 18829-73/9833-73 1 Ring
13 80-4614092 1 Spring
14 70-1405089 2 Connecting pipe
15 017-022-30-1-4 ГОСТ 18829-73/9833-73 2 Ring
16 Р50-4614019-Б 1 Valve body
17 022-027-30-2-2 ГОСТ 18829-73/9833-73 1 Ring
18 А61-072 1 Spring
19 14,288-60 ГОСТ 3722-81 1 Ball
20 Р50-4614018 1 Seat
21 КГ 1/8". А12.019 4 Plug
22 80-4614085 1 Plug
23 6,350-100 ГОСТ 3722-81 1 Ball
24 80-4614058 1 Spring
25 80-4614065 1 Washer
26 80-4614064 1 Plunger
27 80-4614086 1 Spring
28 80-4614063 1 Screw
29 005-008-19-1-4 ГОСТ 18829-73/9833-73 1 Ring
30 80-4614037 1 Choke
31 80-4614071 1 Handwheel
32 В8 ГОСТ 13940-86 1 Ring
33 С36 ГОСТ 13943-86 1 Ring
34 Р50-4614017 1 Washer
35 М10-6gх20.88.35.019 ГОСТ 7796-70 12 Bolt
36 Р50-4614052 1 Washer
37 Р50-4614080-А 1 Lever
38 Р50-41614048-Б1 1 Coupling
39 Р50-4614049-Б 1 Catch
40 Р50-4614054 1 Handle
41 Р50-4614072 1 Spring
42 5,556-60 ГОСТ 3722-81 2 Ball
43 2х12.019 ГОСТ 397-79 1 Cotter pin
44 Р50-4614051 1 Shaft
45 Р50-4614053 1 Washer
46 Р50-4614090 1 Lever
47 80-4614060 1 Left cover
48 80-4614014 1 Spring
49 80-4614012 1 Liner

- 323 -
Fig. 46.24. Governor

- 324 -
Group 46. Hydraulic system
Subgroup 4614. Governor

Fig. No. Pos.


Designation Q-ty Description
No.
46.24 50 80-4614041 1 Slide valve screw
51 3,969-100 ГОСТ 3722-81 5 Ball
52 80-4614027 1 Washer
53 80-4614043 1 Bush
54 056-060-25-2-2 ГОСТ 18829-73/9833-73 2 Ring
55 А.4х20.65Г ГОСТ 14229-93 1 Pin
56 80-4614044 1 Washer
57 С15 ГОСТ 13942-86 1 Ring
58 С25 ГОСТ 13941-86 2 Ring
59 80-4614046 1 Bush
60 80-4614042 1 Slide valve nut
61 80-4614045 1 Bush
62 80-4614013 1 Sliding valve
63 70-4614032-А 1 Bracket
65 80-4614024 1 Liner nut
66 С38 ГОСТ 13941-86 1 Ring
67 80-4614022 1 Liner screw
68 Р50-4614015-Б-01 1 Right cover

- 325 -
Fig.46.25. Governor control

- 326 -
Group 46. Hydraulic system
Subgroup 4616. Governor control

Fig. No. Pos.


Designation Q-ty Description
No.
46.25 Governor control
80П-4616210 1
(without switch)
1 70-4616140 1 Rod
2 10 ОТ ОСТ 37.001.115-75 1 Washer
3 М10-6Н.6.019 ГОСТ 5915-70 1 Nut
4 85-4616053 1 Boot
5 80-4616050-В 1 Shaft
6 80В-4616050 1 Bracket
7 М8-6Н.6.019 ГОСТ 5915-70 9 Nut
8 8Т ОСТ 37.001.115-75 10 Washer
9 С 8.01.016 ГОСТ 11371-78 7 Washer
10 С 6.01.016 ГОСТ 11371-78 1 Washer
11 6Т ОСТ 37.001.115-75 4 Washer
12 М6-6gх12.88.35.019 ГОСТ 7798-70 1 Bolt
13 80-4616044-Б 1 Rod
14 С 10.01.016 ГОСТ 11371-78 2 Washer
15 80-4616051 3 Slider
16 М6-6Н.6.019 ГОСТ 5915-70 1 Nut
17 80-4616034 1 Stop
18 80-4616070 1 Screw
19 50-1605152 1 Spring
20 А13.17.000 1 Handle
21 80-4616020-Б 1 Lever
22 80-4616035 1 Lever
23 85-4616090-Б1 1 Sector
24 80-4616017 1 Roller
25 80-4616155 1 Pin
26 М6-6gх14.88.35.019 ГОСТ 7798-70 3 Bolt
27 3,2х18.019 ГОСТ 397-79 8 Cotter pin
28 80-4616016 1 Bush
29 М8-6gх16.88.35.019 ГОСТ 7796-70 4 Bolt
30 80-4616150 1 Bracket
31 80В-4616040 1 Lever
32 80В-4616023 1 Bush
33 80В-4616022 1 Sphere
34 70-4616150 1 Rod
35 70-8405114 1 Bush
36 70-4616051 1 Roller
37 Р50-4616053 2 Key
38 С15 ГОСТ 13942-86 2 Ring
39 Р50-4616054 1 Plate
40 Р50-4616130-Б 1 Lever
41 70-4616110 1 Lever
42 М8-6gх25.88.35.019 ГОСТ 7796-70 2 Bolt

- 327 -
Fig.46.26. Governor control (Hydraulic mounted system with combined adjustment)

- 328 -
Group 46. Hydraulic system
Subgroup 4616. Governor control
(Hydraulic mounted system with combined adjustment)

Fig. No. Pos.


Designation Q-ty Description
No.
46.26 80-4616210 Governor control
01 80-4616140 1 Handle (2-4)
1 80-4616095-Б 1 Pulley
2 А13.11.000 1 Handle
3 80-4616048 1 Pin
4 80-4616041 1 Flywheel
5 В.М6-6gх12.58.019 ГОСТ 17473-80 1 Screw
6 6Т ОСТ 37.001.115-75 5 Washer
7 С 6.01.016 ГОСТ 11371-78 5 Washer
8 80-4616115-Б 1 Bracket
9 85-4616125-Б 2 Cable
10 С 10.01.016 ГОСТ 11371-78 8 Washer
11 3,2х18.019 ГОСТ 397-79 13 Cotter pin
12 80-4616075 2 Slider
13 М12-6gх75.88.35.019 ГОСТ 7795-70 2 Bolt
14 12 ОТ ОСТ 37.001.115-75 4 Washer
15 80-4616046-Б 1 Spring
16 80-4616090-Б 1 Rod
17 С 8.01.019 ГОСТ 11371-78 9 Washer
18 М8-6Н.6.019 ГОСТ 5915-70 3 Nut
19 80-4616051 3 Slider
20 80-4616040 1 Lever
21 80-4616057 1 Bracket
22 80-4616080 1 Lever
23 80-4616059 1 Shaft
24 50-4607082-А 4 Bush
25 80-4616061 1 Lever
26 80-4616072 1 Block
27 М8-6gх14.88.35.019 ГОСТ 7796-70 3 Bolt
28 80-4616065 1 Rod
29 80-4616065-01 1 Rod
30 М6-6gх12.88.35.019 ГОСТ 7798-70 1 Screw
31 80-4616068 1 Casing
32 80-4616069 1 Pulley
33 80-4616071 1 Cover
34 85-4614130 1 Lever

- 329 -
Fig.46.27. Switch (Hydraulic mounted system with combined adjustment)

- 330 -
Group 46. Hydraulic system
Subgroup 4616. Switch
(Hydraulic mounted system with combined adjustment)
Fig. No. Pos.
Designation Q-ty Description
No.
46.27 80-4618005 1 Switch (1-47)
01 80-4618025 1 Stop (1,27,32)
1 80-4618014 2 Washer
2 С 6.01.019 ГОСТ 11371-78 9 Washer
3 М6-6gх12.88.35.019 ГОСТ 7798-70 9 Bolt
4 6Т ОСТ 37.001.115-75 9 Washer
5 6х18 ОСТ 37.001.163-75 2 Pin
6 2х12.019 ГОСТ 397-79 2 Cotter pin
7 80-4618051 1 Lever
8 941/12 ГОСТ 4060-78 2 Bearing
9 80-4618061 1 Bush
10 012-015-19-2-4 ГОСТ 18829-73/9833-73 3 Ring
11 80-4618055 1 Fork
12 80-4618037 1 Roller
13 80-4618052 1 Shaft
14 80-4618060 1 Lever
15 80-4618065 1 Lever
16 80-4618041 1 Cover
17 024-028-25-2-4 ГОСТ 18829-73/9833-73 3 Ring
18 80-4618011 1 Casing
19 М8-6Н.6.019 ГОСТ 5915-70 1 Nut
20 8Т ОСТ 37.001.115-75 1 Washer
21 80-4618042 2 Plate
22 101 ГОСТ 8338-75 1 Bearing
23 С12 ГОСТ 13940-86 1 Ring
24 80-4618064 1 Bush
25 80-4618036 1 Key
26 80-4618032 1 Clutch
27 1000095 ГОСТ 8338-75 2 Bearing
28 80-4618019 1 Stop
29 80-4618030 1 Lever
30 3х5 ГОСТ 24071-97 1 Key
31 80-4618034 1 Rocking arm
32 80-4618013 2 Stop
33 80-4618018 1 Roller
34 80-4618035 1 Lever
35 80-4618047 1 Screw
36 80-4618062 1 Spring
37 80-4618070 1 Lever
38 80-4618046 1 Cover
39 80-4618044 4 Gasket
40 80-4618063 1 Roller
41 72-2308100 2 Screw
42 80-4618038 1 Fork
43 80-4618039-А 1 Pin
44 80-4618050 1 Lever
45 80-4618040 1 Lever
46 80-4618054 1 Bush
47 80-4618045 1 Lever

- 331 -
Fig.46.28. Mixer

- 332 -
Group 46. Hydraulic system
Subgroup 4618. Mixer

Fig. No. Pos.


Designation Q-ty Description
No.
46.28 85-4618010 1 Mixer (6-12, 15-20)
85-4618050 1 Mixer (1-20)
1 М6-6gх12.88.35.019 ГОСТ 7798-70 1 Bolt
2 6Т ОСТ 37.001.115-75 1 Washer
3 С 6.01.019 ГОСТ 6958-78 1 Washer
4 85-4618040 1 Lever
5 85-4618035 1 Lever
6 85-4618012 2 Cover
7 85-4618011 1 Casing
8 85-4618025 2 Lever
9 80-4618044 2 Gasket
10 012-016-25-2-2 ГОСТ 18829-73/9833-73 2 Ring
11 60105(80105) ГОСТ 7242-81 2 Bearing
12 С47 ГОСТ 13943-86 2 Ring
13 85-4618045 1 Lever
14 В.М5-6gх10.58.019 ГОСТ 17473-80 1 Screw
5Т ОСТ 37.001.115-75 1 Washer
15 941/12 ГОСТ 4060-78 4 Bearing
16 85-4618014 2 Bush
17 85-4618013 1 Roller
18 85-4618021 1 Stop
19 85-4618020 1 Lever
20 80-4618034 1 Rocking arm

- 333 -
Fig.46.29. Hydraulic lift cylinder

- 334 -
Subgroup 4625. Hydraulic lift cylinder

Fig. No. Pos.


Designation Q-ty Description
No.
46.29 820-4625010-Б or 1 Cylinder assembly (1-6)
(820Е-4625010-Б)
1 820-4625020 1 Cylinder
(820E-4625020)
2 820-4625015 1 Locking ring
(820E-4625015)
3 DFI 80-85-9,5 Simrit 2 Guide ring
PF48
4 NI300 80-90-12 1 Cuff
T94AU925
5 AUASOB 80-90-6,1-8,3 1 Scraper
T94AU925
6 820-4625014-Б 1 Plunger
(820E-4625014-Б)

820Н-4625010-Б 1 Cylinder assembly (1-6)


1 820H-4625020 1 Cylinder
2 820H-4625015 1 Ring
3 GR6900800-Z61 2 Guide
4 LI-CUP 1 Cuff
RU 2300800 WUAQ3
5 DA22 1 Scraper
WD-2200800 WUAQ3
6 820H-4625014-Б 1 Plunger

- 335 -
Fig.46.30. Hydraulic lift distributor

- 336 -
Subgroup 4634. Hydraulic lift distributor

Fig. No. Pos.


Designation Q-ty Description
No.
46.30 820-4634010 1 Distributor
820-4634020A 1 Valve (25-30)
1 820-4634021 1 Plug
2 017-020-19-2-6 ГОСТ 18829-73/9833-73 2 Ring
or 17,00-2,00 SIMRIT 72 NBR 872 2 Ring
3 A61-072 1 Spring
4 14,288-60 ГОСТ 3722-81 1 Ball
5 820-4634017 1 Seat
6 820-4634025A 2 Ring
7 820-4634025-A-01 2 Ring
8 068-072-25-2-6 ГОСТ 18829-73/9833-73 2 Ring
or 65,00-2.50 SIMRIT 72 NBR 872 2 Ring
9 820-4634022 2 Plug
10 013-016-19-2-6 ГОСТ 18829-73/9833-73 2 Ring
or 13,00-2,00 SIMRIT 72 NBR 872 2 Ring
11 6,350-100 ГОСТ 3722-81 1 Ball
12 80-4614058 1 Spring
13 КГ 1/8". А12.019 ТУ 23.1.506-91 1 Plug
14 820-4634013-Б 1 Cover
15 2-10 ГОСТ 24811-81 1 Scraper
16 М6-6gх16.88.35.019 ГОСТ 7798-70 2 Bolt
17 6Т ОСТ 37.001.115-75 2 Washer
18 820-4634039 1 Bush
19 010-014-25-2-2 ГОСТ 18829-73/9833-73 1 Ring
20 820-4634038 1 Tappet
21 021-024-19-2-6 ГОСТ 18829-73/9833-73 1 Ring
or 21,00-2,00 SIMRIT 72 NBR 872 1 Ring
22 820-4634036 1 Locking ring
23 820-46340111 1 Body
24 064-068-25-2-6 ГОСТ 18829-73/9833-73 2 Ring
or 63,00-2.50 SIMRIT 72 NBR 872 1 Ring
25 820-4634014 1 Valve
26 820-4634018-Б 1 Seat
27 2.3х14 ГОСТ 3128-70 1 Pin
28 5,556-60 ГОСТ 3722-81 1 Ball
29 Р75-ВЗВР-082 1 Spring
30 820-4634033 1 Stop
31 820-4634012 1 Sliding valve
32 820-4634024 1 Spring
33 820-4634026-Б 1 Valve
34 820-4634019 1 Plug
35 820-4634037 1 Stop
36 820-4634028 1 Spring
37 820-4634029 1 Stop
38 820-4634027 1 Pin
39 820-4634016 1 Spring

- 337 -
Fig.46.31. Hydraulic lift control

- 338 -
Subgroup 4635. Hydraulic lift control
Fig. No. Pos.
Designation Q-ty Description
No.
46.31 820-4635020A 1 Force sensor (38-42, 44, 49)
820-4635060 1 Adder stage (16, 29, 30, 36, 37)
820-4635090-Б 1 Bracket (3, 6,7, 11, 17)
1 820-4635025 1 Link
2 3,2х25.019 ГОСТ 397-79 1 Cotter pin
3 820-4635095-Б 1 Bracket
4 8Т ОСТ 37.001.115-75 4 Washer
5 М8-6gх20.88.35.019 ГОСТ 7796-70 4 Bolt
6 М14х1,5-6Н.6.019 ГОСТ 5915-70 4 Nut
7 80B-1108347 2 Disk spring
8 80B-1108317 4 Boss
9 М6-6Н.6.019 ГОСТ 5915-70 8 Nut
10 С 6.01.019 ГОСТ 6958-78 4 Washer
11 820-4635100-Б 2 Lever
12 A13.11.000 2 Handle
13 80-4616070 1 Screw
14 820-4635082 1 Stop
15 М6-6H.019 ТУ 23.1.505-91 1 Nut
16 3,2х18.019 ГОСТ 397-79 7 Cotter pin
17 80-1108028 2 Washer
18 80-1108178 2 Friction washer
19 Morse 900 or 2 Cable
23.588.1.1.2.00.01-01
20 М6-6gх16.88.35.019 ГОСТ 7798-70 6 Bolt
21 6Т ОСТ 37.001.115-75 6 Washer
22 820-4635080 1 Lever
23 820-4635075 1 Lever
24 011-015-25-2-4 ГОСТ 18829-73/9833-73 2 Ring
25 820-4635034 1 Roller
26 820-4635033-Б 1 Bush
27 019-023-25-2-4 ГОСТ 18829-73/9833-73 1 Ring
28 820-4635046 1 Cramp
29 820-4635070 1 Lever
30 820-4635069 1 Catch
31 820-4635030 1 Link
32 820-4635015-Б 1 Lever
33 820-4635016-B 1 Roller
34 820-4635032-Б 1 Bush
35 820-4635049 1 Cotter pin
36 820-4635063 1 Spring
37 820-4635065 1 Bracket
38 4х22.019 ГОСТ 397-79 1 Cotter pin
39 820-4635024 1 Nut
40 820-4635023 1 Washer
41 820-4635022 1 Spring
42 820-4635026-Б 1 Bush
43 820-4635044-Б 4 Gasket
44 820-4635043-Б 1 Cover
45 12 ОТ ОСТ 37.001.115-75 4 Washer
46 М12-6gх30.88.35.019 ГОСТ 7796-70 4 Bolt
47 С22 ГОСТ 13940-86 2 Ring
48 820-4635018 1 Pin
49 820-4635021 1 Rod
50 820-4635019 1 Shackle
51 820-4635048 1 Rod
52 027-032-30-1-4 ГОСТ 18829-73/9833-73 2 Ring

- 339 -
Fig.46.32. Hydraulic lift

- 340 -
Subgroup 4635. Hydraulic lift

Fig. No. Pos.


Designation Q-ty Description
No.
46.32 1221-4635010 1 Hydraulic lift
1 16 ОТ ОСТ 37.001.115-75 2 Washer
2 М16-6gх75.88.35.019 ГОСТ 7795-70 2 Bolt
3 5х36.019 ГОСТ 397-79 2 Cotter pin
4 12 ОТ ОСТ 37.001.115-75 4 Washer
5 М12-6gх30.88.35.019 ГОСТ 7796-70 4 Bolt
6 40-4605023-A2 2 Washer
7 1221-4635013 1 Lever left
8 1221-4635016 2 Pin
9 1221-4635014 1 Shaft
10 079-085-36-2-2 ГОСТ 18829-73/9833-73 2 Ring
11 820-4635091 2 Cage
12 BABSL 60-72-7 SIMRIT 72 NBR 902 2 Cuff
13 820-4635115 2 Hose
14 820-4635083 2 Connecting pipe
15 012-015-19-2-4 ГОСТ 18829-73/9833-73 2 Ring
16 1221-4635011 1 Casing
17 8Т ОСТ 37.001.115-75 14 Washer
18 М8-6gх40.88.35.019 ГОСТ 7795-70 2 Bolt
19 820-4634010 1 Distributor
20 1221-4635012 1 Lever right
21 820-4635085 1 Bracket
22 М8-6gх30.88.35.019 ГОСТ 7796-70 2 Bolt
23 М8-6gх20.88.35.019 ГОСТ 7796-70 10 Bolt
24 820-4635125 1 Cover
25 820-4635039 1 Gasket
26 820-4635088 4 Bush
27 A61.05.005 1 Locking pin
28 A61.05.004 1 Ring
29 027-032-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
30 80-4608021 1 Choke
31 M80-4616011 4 Pin
32 20 ОТ ОСТ 37.001.115-75 4 Washer
33 М20-6Н.6.019 ГОСТ 5915-70 4 Nut
34 A61.10.001 1 Pin
35 ПК КГ 3/8" 1 Plug
36 820-4625010-Б or 2 Cylinder
820Н-4625010-Б
820Е-4625010-Б
37 820-4635084 2 Angle piece

- 341 -
Fig.48.1 Differential lock control of the rear axle

- 342 -
Subgroup 4801. Differential lock control of the rear axle

Fig. No. Pos.


Designation Q-ty Description
No.
48.1 80-4801200-Б 1 Cock assembly (2, 7,8, 15, 16, 19-35)
1 80-4801222-Б 1 Plug
2 80-4801211-Б 1 Cock body
3 50-4607082-A 2 Bush
4 80-4802020 1 Bracket
5 12 ОТ ОСТ 37.001.115-75 1 Washer
6 2.5х16.019 ГОСТ 397-79 1 Cotter pin
7 С 6.01.019 ГОСТ 6958-78 3 Washer
8 6Т ОСТ 37.001.115-75 3 Washer
9 М6-6gх14.88.35.019 ГОСТ 7798-70 2 Bolt
10 80-4803170 1 Pedal
11 М8-6gх16.88.35.019 ГОСТ 7796-70 2 Bolt
12 8Т ОСТ 37.001.115-75 4 Washer
13 С 8.01.019 ГОСТ 11371-78 4 Washer
14 70-4616033 1 Spring
15 50-3502068 1 Spring
16 М6-6gх16.88.35.019 ГОСТ 7798-70 1 Bolt
17 80-4801216-Б 1 Lever
18 М8-6gх20.88.35.019 ГОСТ 7796-70 2 Bolt
19 80-4803151 1 Bracket
20 В.М5-6gх10.58.019 ГОСТ 17473-80 2 Screw
21 5Т ОСТ 37.001.115-75 2 Washer
22 С 5.01.019 ГОСТ 11371-78 6 Washer
23 80-4801217-Б 1 Stop
24 80-4801213-Б 1 Valve
25 50-4609054 1 Spring
26 017-022-30-1-4 ГОСТ 18829-73/9833-73 1 Ring
27 80-4801221-Б 1 Stop
28 80-4801223 1 Guide
29 70-4609037 1 Spring
30 80-4801226 1 Valve
31 80-4801212-Б 1 Cock slide
32 012-016-25-2-4 1 Ring
ГОСТ 18829-73/ОСТ 9833-73
33 A13.38.002 1 Liner
34 7,938-100 ГОСТ 3722-81 1 Ball
35 007-011-25-2-2 ГОСТ 18829-73/9833-73 1 Ring
36 80-4801224 1 Stop
37 80-4801214-Б 1 Plug

- 343 -
Fig. 67.1. Tractor cab. Rear fenders

- 344 -
Group 67. Tractor cab
Subgroup 6700. Tractor cab. Rear fenders

Fig. No. Pos.


Designation Q-ty Description
No.
67.1 80-6700010-Б 1 Cab assembly
80-6708210 1 Rear frame (32-35)
80-6708900-03 2 Glass assembly (13, 14, 19, 24, 45, 47-50)
1 3,2х18.019 ГОСТ 397-79 8 Cotter pin
2 6700.01 4 Air-lift
3 М6-6Н.6.019 ГОСТ 5915-70 22 Nut
4 80-6708225 6 Bracket
5 С 6.01.019 ГОСТ 11371-78 20 Washer
6 М6-6gх20.88.35.019 ГОСТ 7798-70 28 Bolt
7 А30.04.017 8 Cap
8 80-6700031-Б-01 1 Right bracket
9 85-6703056 1 Insert
10 80-6703012-А or 2 Glass
80-6703012-А1
11 А37.08.043 2 Seal
12 М8-6gх20.88.35.019 ГОСТ 7796-70 4 Bolt
13 А30.04.017-01 4 Cap
14 8Т ОСТ 37.001.115-75 26 Washer
15 С 8.01.019 ГОСТ 11371-78 24 Washer
16 80-3805030 2 Bracket
17 80-6703011-А or 1 Glass
80-6703011-А1
18 А37.08.043-01 1 Seal L=4200 mm
19 80-6703112-А 1 Right handrail
20 М8-6Н.6.019 ГОСТ 5915-70 8 Nut
21 М8-6gх40.88.35.019 ГОСТ 7795-70 2 Bolt
22 А30.04.051 2 Clamp
23 80-8201050 2 Mirror assembly
24 80-8201106-А 2 Pipe
25 А30.04.017-02 4 Cap
26 80-8201107 4 Washer
27, 48 М8-6gх30.88.35.019 ГОСТ 7796-70 8 Bolt
28 А37.08.040 or 1 Seal
А37.08.045
29 80-6707010-Б 2 Loop
30 80-6707025-Б4 1 Roof assembly (plastic)
31 80-6700020-Б-01 1 Cab (welded framework)
32 80-6708211-А or 1 Glass
80-6708211-А1
33 80-6708215 1 Frame
34 А34.08.043-05 1 Seal
35 80-6700021-01 1 Seal
36 549А-1305044 2 Ring
37 80-6707082 1 Facing
38 В.М6-6gх12.58.019 ГОСТ 17473-80 2 Screw
39 С 6.01.019 ГОСТ 6958-78 10 Washer
40 80-6707075 1 Bracket
41 А37.09.010 1 Latch
42 80-6707080 1 Handrail
43 В.М6-6gх20.58.019 ГОСТ 17473-80 1 Screw
44 В.М5-6gх50.58.019 ГОСТ 17473-80 1 Screw
45 80-6708903 4 Bush
46 8х65 ОСТ 37.001.163-75 4 Pin
47 80-6708902 4 Loop
49 F-202 2 Seal

- 345 -
Fig. 67.1. Tractor cab. Rear fenders

- 346 -
Group 67. Tractor cab
Subgroup 6700. Tractor cab. Rear fenders

Fig. No. Pos.


Designation Q-ty Description
No.
67.1 50 1221-6708901-А or 2 Glass
1221-6708901-А1
51 А37.05.025 1 Catch
52 В.М6-6gх25.58.019 ГОСТ 17473-80 2 Screw
53 А37.05.021-Б 1 Bracket
54 80-8404020-Б 1 Flap
80-8404020-Б-01 1 Flap
55 80-8404014-А 2 Seal
56 М6-6gх20.88.35.019 ГОСТ 7798-70 12 Bolt
57 85-8404040-А 2 Splash guard
58 80-8404032 4 Plate
59 80-8404031-Б 2 Spring
60 В.М6-6gх16.58.019 ГОСТ 17473-80 4 Screw
61 80-8404034-А 2 Plate
62 80-6708975 2 Screw
63 80-6708904 2 Gasket
64 А37.01.041 2 Bush
65 А37.04.053 2 Nut
66 А37.04.051 2 Handle
67 А37.04.052 2 Lever
68 М8-6gх20.88.35.019 ГОСТ 7796-70 18 Bolt
80-8404011-Б 1 Fender
69
80-8404011-Б-01 1 Fender
70 80-8404013-А 2 Seal
71 М12-6gх35.88.35.019 ГОСТ 7796-70 14 Bolt
72 А37.04.050 2 Bracket
73 С 12.01.019 ГОСТ 11371-78 6 Washer
74 12 ОТ ОСТ 37.001.115-75 6 Washer
75 М12-6Н.6.019 ГОСТ 5915-70 6 Nut
76 80-6700029 4 Bolt
77 С 16.01.019 ГОСТ 11371-78 12 Washer
78 80-6700037-Б 1 Left support
80-6700037-Б-01 1 Right support
79 80-6700163 4 Fixture
80 80-6700160 4 Vibration insulator
81 80-6703112-А 1 Handrail left
82 130-5001364-В 4 Cushion
83 М16-6Н.6.019 ГОСТ 5915-70 4 Nut
84 4х36.019 ГОСТ 397-79 4 Cotter pin
85 М18х1,5-6Н.6.019 ГОСТ 5915-70 4 Nut
86 80-6702022 2 Clamp (variant)
87 М20х75 4 Bolt (variant)
88 20 ОТ ОСТ 37.001.115-75 4 Washer
89 18 ОТ ОСТ 37.001.115-75 4 Washer
90 70-6702300-01 1 Right bracket
70-6702300-02 1 Left bracket
91 М16-6gх45.88.35.019 ГОСТ 7796-70 6 Bolt
92 80-6702068 1 Left bracket
80-6702069 1 Right bracket
93 80-6700031-Б 1 Left bracket
94 80-6708209 1 Handle
95 80-6707013 2 Loop
96 70-6708189 2 Shaft
97 А30.04.017-02 4 Cap

- 347 -
For 952.3

Fig.67.2. Tractor cab. Rear fenders

- 348 -
Group 67. Tractor cab
Subgroup 6700. Tractor cab. Rear fenders

Fig. No. Pos.


Designation Q-ty Description
No.
67.2 80-6708210 1 Rear frame (32-35)
80-6708900/-01 1/1 Glass assembly (13, 14, 19, 24, 45, 47-50)
1 3,2х18.019 ГОСТ 397-79 10 Cotter pin
2 21054 4 Air-lift
3 М6-6Н.6.019 ГОСТ 5915-70 22 Nut
4 80-6708225 6 Bracket
5 С 6.01.016 ГОСТ 11371-78 24 Washer
6 М6-6gх16.88.35.019 ГОСТ 7798-70 32 Bolt
7 A30.04.017 10 Cap
8 80-6700031-Б-01 1 Right bracket
9 85-6703056 1 Insert
10 80-6703012-А or 2 Glass
80-6703012-А1
11 A37.08.043 or 2 Seal
A37.08.043-01 1 Seal
12 М8-6gх25.88.35.019 ГОСТ 7796-70 4 Bolt
13 8Т ОСТ 37.001.115-75 36 Washer
14 С 8.01.019 ГОСТ 11371-78 34 Washer
15 80-3805030 2 Bracket
16 80-6703011-А or 1 Glass
80-6703011-А1
17 80-6700018 1 Seal L=4200 mm
18 80-6703105-01 1 Right handrail
19 М8-6Н.6.019 ГОСТ 5915-70 8 Nut
20 М8-6gх40.88.35.019 ГОСТ 7795-70 2 Bolt
21 A30.04.051 2 Clamp
22 80-8201055 2 Mirror
23 80-8201106 2 Pipe
24 A30.04.017-02 4 Cap
25 80-8201107 4 Washer
26 М8-6gх16.88.35.019 ГОСТ 7796-70 4 Bolt
27 A30.04.017-01 10 Cap
28 A37.08.017 1 Seal
30 Д82-6707005 1 Roof assembly
31 80-6700020-Б 1 Cab (welded framework)
32 80-6708211-А 1 Glass
80-6708211-А1
33 80-6708215 1 Frame
34 A37.08.043-05 1 Seal
35 80-6700021-01* 1 Seal
38 В.М6-6gх12.58.019 ГОСТ 17473-80 2 Screw
39 8Т ОСТ 37.001.115-75 14 Washer
45 80-6708903 4 Bush
46 8х65 ОСТ 37.001.163-75 4 Pin
47 80-6708902 4 Loop
48 М8-6gх30.88.35.019 ГОСТ 7796-70 4 Bolt
49 Ф-202 2 Seal
50 1221-6708901-А or 2 Glass
1221-6708901-А1
51 A37.05.025 1 Catch
52 В.М6-6gх25.58.019 ГОСТ 17473-80 2 Screw
53 A37.05.021 1 Bracket
54 80-8404020-Б 1 Flap left
80-8404020-Б-01 1 Flap right
55 80-8404014-A 2 Seal
* Allowed substitution for 80-6700026-02
** For 952.3

- 349 -
For 952.3

Fig.67.2. Tractor cab. Rear fenders

- 350 -
Group 67. Tractor cab
Subgroup 6700. Tractor cab. Rear fenders

Fig. No. Pos.


Designation Q-ty Description
No.
67.2 56 М6-6gх25.88.35.019 ГОСТ 7798-70 10 Bolt
57 85-8404040-A 2 Splash guard
58 80-8404032 4 Plate
59 80-8404031-Б 2 Spring
60 В.М6-6gх16.58.019 ГОСТ 17473-80 6 Screw
61 80-8404034-A 2 Plate
62 80-6708975 2 Screw
63 80-6708904 2 Gasket
64 А37.01.041 2 Bush
65 80-6708961 4 Washer
66 М8-6gх20.88.35.019 ГОСТ 7796-70 22 Bolt
67 Д82-8404020-А or 1 Fender
80-8404011-Б or
Д82-8404020
Д82-8404020-А-01 or 1 Fender
80-8404011-Б-01 or
Д82-8404020-01**
68 80-8404013-А or 2 Seal
80-8404013-Б**
69 80-6708970 2 Handle
70 М12-6gх25.88.35.019 ГОСТ 7796-70 6 Bolt
71 С 12.01.019 ГОСТ 11371-78 6 Washer
72 М12-6Н.6.019 ГОСТ 5915-70 6 Nut
73 12 ОТ ОСТ 37.001.115-75 6 Washer
74 80-6700029 4 Bolt
75 16 ОТ ОСТ 37.001.115-75 12 Washer
76 80-6700037-Б 1 Left support
80-6700037-Б-01 1 Right support
77 80-6700163 4 Fixture
78 80-6700160 4 Vibration insulator
79 80-6703105 1 Handrail left
80 130-5001364-B 4 Cushion
81 М16-6Н.6.019 ГОСТ 5918-73 4 Nut
82 4х36.019 ГОСТ 397-79 4 Cotter pin
83 M20х75 4 Bolt
84 20 ОТ ОСТ 37.001.115-75 4 Washer
85 1221-6702300 1 Right bracket
1221-6702300-01 1 Left bracket
86 М16-6gх50.88.35.019 ГОСТ 7796-70 4 Bolt
87 16 ОТ ОСТ 37.001.115-75 6 Washer
88 80-6702068 1 Left bracket
80-6702069 1 Right bracket
89 80-6700031-Б 1 Left bracket
90 М12-6gх35.88.35.019 ГОСТ 7796-70 8 Bolt
** For 952.3

- 351 -
Fig. 67.3. Roof

Fig.67.4. Roof

- 352 -
Group 67. Tractor cab
Subgroup 6700. Roof

Fig. No. Pos.


Designation Q-ty Description
No.
67.3 1 80-6707020-01 2 Hinge
2 Д82-6707030 1 Upholstery
3 80-6707080 1 Handrail
4 А37.09.010 1 Latch
5 80-6708225 2 Bracket
10 549А-1305044 2 Ring
11 А30.04.017 6 Cap
12 80х-8400026 2 Ring
20 М6-6gх45.88.35.019 ГОСТ 7795-70 2 Bolt
21 М8-6gх25.88.35.019 ГОСТ 7796-70 6 Bolt
22 М6-6gх18.88.35.019 ГОСТ 7798-70 4 Bolt
23 М6-6gх25.88.35.019 ГОСТ 7798-70 2 Bolt
24 В.М6-6gх25.58.019 ГОСТ 17473-80 6 Screw
25 М6-6Н.6.019 ГОСТ 5915-70 6 Nut
26 С 6.01.019 ГОСТ 11371-78 10 Washer
27 С 8.01.019 ГОСТ 11371-78 6 Washer
28 6Т ОСТ 37.001.115-75 6 Washer
29 8Т ОСТ 37.001.115-75 6 Washer
35 Д82-6707035 1 Roof

Group 67. Tractor cab


Subgroup 6700. Roof

Fig. No. Pos.


Designation Q-ty Description
No.
67.4 1 Д82-6707025 1 Roof
2 A37.08.045 1 Seal
5 80-6700027 1 Cover
10 М8-6gх30.88.35.019 ГОСТ 7796-70 2 Bolt
11, 12 С 8.01.019 ГОСТ 11371-78 6 Washer
13 3,2х18.019 ГОСТ 397-79 4 Cotter pin
14 8Т ОСТ 37.001.115-75 2 Washer
20 6700.01 2 Air-lift

- 353 -
Fig. 67.5. Canopy framework. Base

- 354 -
Group 67. Cab
Subgroup 6700. Canopy framework. Base

Fig. No. Pos.


Designation Q-ty Description
No.
67.5 Canopy framework with the base as-
80-6700510 1
sembly
1 85-6703056 1 Insert
2 80-6702510 1 Base
3 80-6700511 1 Liner
4 М12-6gх25.88.35.019 ГОСТ 7796-70 22 Bolt
5 12 ОТ ОСТ 37.001.115-75 24 Washer
6 С 12.01.019 ГОСТ 11371-78 22 Washer
7 80-6700511-01 1 Liner
8 80-6701505 1 Framework
9 М6-6gх16.88.35.019 ГОСТ 7798-70 10 Bolt
10 С 6.01.019 ГОСТ 11371-78 25 Washer
11 80-8404020-Б 1 Flap
80-8404020-Б-01 1 Flap
12 80-8404014-A 2 Seal
13 М6-6gх25.88.35.019 ГОСТ 7798-70 10 Bolt
14 85-8404040-A 2 Splash guard
15 80-8404032 2 Plate
16 М6-6Н.6.019 ГОСТ 5915-70 22 Nut
17 80-8404031-Б 2 Spring
18 М6-6gх16.88.35.019 ГОСТ 7798-70 10 Bolt
19 80-8404034-A 2 Plate
20 A37.01 022 6 Washer
21 М8-6gх20.88.35.019 ГОСТ 7796-70 18 Bolt
22 8Т ОСТ 37.001.115-75 18 Washer
23 С 8.01.019 ГОСТ 11371-78 18 Washer
24 80-8404011-Б 1 Fender
80-8404011-Б 1 Fender
25 80-8404013-A 2 Seal
26 85-3712041 1 Right bracket
85-3712041-01 1 Left bracket
27 М8-6gх14.88.35.019 ГОСТ 7796-70 4 Bolt
28 М8-6Н.6.019 ГОСТ 5915-70 4 Nut
29 85-3712045 1 Right bracket
85-3712045-01 1 Left bracket
30 В.М6-6gх18.58.019 ГОСТ 17473-80 4 Bandage
31 6Т ОСТ 37.001.115-75 4 Washer

- 355 -
Fig. 67.6. Cab floor

- 356 -
Group 67. Tractor cab
Subgroup 6702. Cab floor

Fig. No. Pos.


Designation Q-ty Description
No.
67.6 1 80-6700300 1 Panel
2 80-6702330 1 Liner
3 80-6702328-01 1 Side piece
4 85-6700330 1 Panel
5 85-6700340 1 Panel
6 С 6.01.019 ГОСТ 11371-78 16 Washer
7 6Т ОСТ 37.001.115-75 20 Washer
8 М8-6gх25.88.35.019 ГОСТ 7796-70 14 Bolt
9 80-6702333-Б2 1 Right mat
10 85-6700036-Б 1 Cover
11 1-4х25.019 ГОСТ 1144-80 28 Wood screw
12 А37.10.031 28 Boss
13 80-6702111 2 Clamp
14 1221-6700060-01 1 Liner
15 80-8100100 1 Panel
16 1221-6700065 1 Liner
17 80-6700205 1 Liner
18 1221-6700050 1 Liner
19 1221-6700060 1 Liner
20 85-6700040-Б 1 Panel
21 85-6702130-Б 1 Panel
22 80-6702190-Б 1 Cover
23 85-6702390-Б 1 Cover
24 М6-6gх16.88.35.019 ГОСТ 7798-70 16 Bolt
25 70-6702111 2 Angle piece
26 80-6702332 1 Left mat
27 80-6702469-А 1 Gasket
28 80-6702468-А 1 Gasket
29 80-6702315-Б 1 Panel
30 С 6.01.019 ГОСТ 11371-78 10 Washer
31 М8-6gх16.88.35.019 ГОСТ 7796-70 4 Bolt
32 80-6702310 1 Bar
33 80-6702348 1 Clamp left
80-6702348-01 1 Clamp right
34 В.М6-6gх12.58.019 ГОСТ 17473-80 4 Screw
35 80-6702085 1 Cover
80-6702243 or 1 Boot (rubber)
36
80П-6702270 1 Boot (vinyl artificial leather)
37 80-6702820 1 Liner (tractors with FDA)
80-6702817 1 Liner (tractors without FDA)
38 80-6700370-Б 1 Cover
39 80-6702328 1 Side piece
40 80-6702320 1 Liner
41 М8-6gх40.88.35.019 ГОСТ 7795-70 2 Bolt
42 80-6700320 1 Panel

- 357 -
Fig. 67.7. Cab doors

- 358 -
Group 67. Tractor cab
Subgroup 6708. Cab doors
Fig. No. Pos.
Designation Q-ty Description
No.
67.7 80-6708010-Б 1 Left door (1, 2, 5-7, 9-14)
80-6708010-Б-01 1 Right door (1-3, 5, 7, 9-14)
80-6105300-А1 Left handle (29-36)
80-6105330-А1 Right handle (33-36, 45-47)
80-6708013-А or
1 2 Glass
80-6708013-А1
2 А37.08.043-02 2 Seal L=2720 mm
3 80-6708020-Б-03 1 Right door
4 8х22 ОСТ 37.001.163-75 2 Pin
5 80-6700021-А 2 Profile
6 80-6708020-Б-02 1 Left door
7 А37.03.022-Б 2 Upper hinge
8 822-6700011-01 10 Pin
5Т ОСТ 37.001.115-75 10 Washer
9 А37.03.022-Б-01 2 Lower hinge
10 М8-6gх25.88.35.019 ГОСТ 7796-70 12 Bolt
11 8Т ОСТ 37.001.115-75 12 Washer
12 С 8.01.019 ГОСТ 11371-78 12 Washer
80-6708014-А or
13 2 Glass
80-6708014-А
14 А37.08.043-03 2 Seal
15 1-4х40.019 ГОСТ 1144-80 2 Wood screw
16 М6-6gх35.88.35.019 ГОСТ 7798-70 2 Bolt
17 С 6.01.019 ГОСТ 11371-78 6 Washer
18 80-6708610 2 Handrail
19 80-6708619 4 Buffer
20 80-6708618 2 Spring
21 80-6708602 2 Liner
22 М6-6H.019 ТУ 23.1.505-91 2 Nut
23 80-6708616 2 Lever
24 3,2х18.019 ГОСТ 397-79 2 Cotter pin
25 6Т ОСТ 37.001.115-75 6 Washer
26 М6-6gх16.88.35.019 ГОСТ 7798-70 2 Bolt
27 80-6708603 2 Liner
28 1-4х25.019 ГОСТ 1144-80 2 Wood screw
29 80-6105301-Б 2 Button
30 80-6105304-Б1 1 Bush
31 945.025.11.01.00 1 Cylinder mechanism
32 2x11,8В3 2 Roller
33 80-6105302 2 Spring
34 80-6105305 2 Handle
35 80-6105303 2 Tappet
36 4х10.019 ТУ РБ 400024166.001-2000 2 Wood screw
37 В.М8-6gх25.58.019 ГОСТ 17475-80 4 Screw
38 М8-6gх16.88.35.019 ГОСТ 7796-70 4 Bolt
39 80-6105170-Б 2 Hook end
40 80-6708812 1 Left cover
80-6708812-01 1 Right cover
41 В.М6-6gх16.58.019 ГОСТ 17475-80 2 Screw
42 80-6105050 1 Left lock
80-6105050-01 1 Right lock
43 В.М6-6gх45.58.019 ГОСТ 17473-80 2 Screw
44 80-6708813 2 Bush
45 С 4.01.019 ГОСТ 6958-78 2 Washer
46 80-6105331-Б 1 Choke

- 359 -
Fig.68.1. Operator seat

- 360 -
Group 68. Driver seat
Subgroup 6800. Operator seat

Fig. No. Pos.


Designation Q-ty Description
No.
68.1 80-6800010 1 Seat (1-64)
80-6800010-01 1 Seat (1-64)
“Grammer MSG85/721”* 1 Seat
1 80В-6800108 1 Boot
2 А61.01.014 1 Handle
3 80В-6801560 1 Base
4 80В-6801240 1 Cable
5 В.М5-6gх16.58.019 ГОСТ 17473-80 2 Screw
6 70-4803023 1 Coupling
7 80В-6801590-Б 1 Frame
8 80В-6801521 4 Stop
9 80В-6801512 4 Bush
10 К12х16х13Е ГОСТ 24310-80 8 Bearing
11 80В-6801033-01 2 Washer
12 80В-6801508 1 Axle
13 80В-6801519 2 Foot
14 80В-6801518 2 Liner
15 80В-6801530-Б 2 Spring
16 12 ОТ ОСТ 37.001.115-75 6 Washer
17 М10-6Н.04.019 ГОСТ 5919-73 6 Nut
18 80В-6801581 2 Pawl
19 80В-6801570 1 Frame
20 4х22.019 ГОСТ 397-79 2 Cotter pin
21 80В-6801012 1 Axle
22 80В-6801004-01 1 Hook
23 80В-6801001 1 Bracket
24 80В-6801003 1 Axle
25 80В-6801004 1 Hook
26 80В-6801002 1 Spring
27 80В-6801507 1 Sector
28 80В-6801033 2 Washer
29 80В-6801506 1 Axle
30 70-6801307 5 Washer
31 80В-6801023 1 Nut
32 80В-6801008 1 Washer
33 3,0-100 ГОСТ 3722-81 22 Ball
34 80В-6801152 1 Screw
35 80-6801550 1 Panel
36 80-6800104 1 Guide
37 70-6804394-Б 4 Rod
38 70-6804391 4 Roller
39 010-015-30-2-3 ГОСТ 18829-73/9833-73 4 Ring
40 80-6800110-01 1 Rack
41 СТ-154Т.6800010 1 Seat
СТ-154ТМ.6800010 1 Seat
42 М8-6gх20.88.35.019 ГОСТ 7796-70 11 Bolt
43 80В-6801031 1 Booster
44 В.М8-6gх25.58.019 ГОСТ 1491-80 4 Screw
45 8Т ОСТ 37.001.115-75 15 Washer
46 80-6800110 1 Rack
47 С 8.01.019 ГОСТ 11371-78 10 Washer
48 80-6800120 1 Guide
49 80-6800103 1 Spring
* Optionally

- 361 -
Fig.68.1. Operator seat

- 362 -
Group 68. Driver seat
Subgroup 6800. Operator seat

Fig. No. Pos.


Designation Q-ty Description
No.
68.1 50 80-6800102 1 Stop
51 70-4202431-01 2 Pin
52 80-6800101 1 Handle
53 70-6801082 1 Handle
54 80В-6801150 1 Handle
55 М8-6Н.04.019 ГОСТ 5916-70 1 Nut
56 80-6801531 6 Buffer
57 80-6809100-11 1 Shock-absorber
58 80В-6801505 1 Roller
59 80В-6801002-01 1 Spring
60 80В-6801507-01 1 Sector
61 80В-6801526 4 Bush
62 80В-6801528 6 Axle
63 80В-6801032 4 Roller
64 80-6800006 20 Button
65 М8-6gх30.88.35.019 ГОСТ 7796-70 4 Bolt
66 80В-6807200 1 Bracket

- 363 -
Fig.68.2. Operator seat.

- 364 -
Group 68. Driver seat
Subgroup 6804. Operator seat

Fig. No. Pos.


Designation Q-ty Description
No.
68.2 80В-6804000 1 Seat (1-27)
1 80В-6804500 1 Boot
2 80В-6804003 1 Rod
3 80В-6804009 1 Axle
4 80В-6800106 2 Bolt
5 80В-6804015 2 Bush
6 80В-6805001 1 Cushion
7 80В-6805002 1 Frame
8 80В-6805500 1 Boot
9 ППР26-04 1 Profile
10 80В-6805010 1 Base
11 80В-6804040 1 Support
12 В.М8-6gх16.58.019 ГОСТ 17475-80 7 Screw
13 С 6.01.019 ГОСТ 11371-78 2 Washer
14 6Т ОСТ 37.001.115-75 2 Washer
15 М6-6gх14.88.35.019 ГОСТ 7798-70 2 Bolt
16 80В-6804001 1 Hook end
17 80В-6804013-Б 2 Spring
18 80В-6804011 1 Comb
19 50-1310158-Б 1 Spring
20 80В-6804080 1 Lever
21 80-6708011 1 Loop
22 4х25.019 ГОСТ 397-79 1 Cotter pin
23 70-6708189-01 1 Axle
24 80В-6804020 1 Panel
25 80В-6804007 1 Cushion
26 80В-6804005 1 Frame
27 ППР26-03 1 Profile

- 365 -
Fig.68.3. Seat suspension.

- 366 -
Group 68. Driver seat
Subgroup 6801. Seat suspension

Fig. No. Pos.


Designation Q-ty Description
No.
68.3 80-6801500 1 Suspension
1 80В-6800108 1 Boot
2 А61.01.014 1 Handle
3 80В-6801560 1 Base
4 80В-6801240 1 Cable
5 В.М5-6gх16.58.019 ГОСТ 17473-80 2 Screw
6 70-4803023 1 Coupling
7 80В-6801590-Б 1 Frame
8 80В-6801521 4 Stop
9 80В-6801512 4 Bush
10 К12х16х13Е ГОСТ 24310-80 8 Bearing
11 80В-6801033 4 Washer
12 80В-6801508 1 Axle
13 80В-6801519 2 Foot
14 80В-6801518 2 Liner
15 80В-6801530-Б 2 Spring
16 10 ОТ ОСТ 37.001.115-75 6 Washer
17 М10-6Н.04.019 ГОСТ 5919-73 6 Nut
18 80В-6801581 2 Pawl
19 80В-6801570 1 Frame
20 4х22.019 ГОСТ 397-79 2 Cotter pin
21 80В-6801012 1 Axle
22 80В-6801004-01 1 Hook
23 80В-6801001 1 Bracket
24 80В-6801003 1 Axle
25 80В-6801004 1 Hook
26 80В-6801002 1 Spring
27 80В-6801507 1 Sector
28 80В-6801506 1 Axle
29 70-6801307 5 Washer
30 80В-6801023 1 Nut
31 80В-6801008 1 Washer
32 3,0-100 ГОСТ 3722-81 22 Ball
33 80В-6801152 1 Screw
34 80-6801550 1 Panel
35 80-6800104 1 Guide
36 70-6804394-Б 4 Rod
37 70-6804391 4 Roller
38 010-015-30-2-3 ГОСТ 18829-73/9833-73 4 Ring
39 80-6800110-01 1 Rack
40 М8-6gх20.88.35.019 ГОСТ 7796-70 15 Bolt
41 80В-6801031 1 Booster
42 М8-6Н.04.019 ГОСТ 5916-70 5 Nut
43 8Т ОСТ 37.001.115-75 19 Washer
44 С 8.01.019 ГОСТ 11371-78 14 Washer
45 80-6800110 1 Rack
46 80-6800120 1 Guide
47 80-6800103 1 Spring
48 80-6800102 1 Stop
49 70-4202431-01 2 Pin
50 80-6800101 1 Handle
51 70-6801082 1 Handle

- 367 -
Fig.68.3. Seat suspension.

- 368 -
Group 68. Driver seat
Subgroup 6801. Seat suspension

Fig. No. Pos.


Designation Q-ty Description
No.
68.3 52 80В-6801150 1 Handle
53 80-6801531 6 Buffer
54 80-6809100-11 1 Shock-absorber
55 80В-6801505 1 Roller
56 80В-6801002-01 1 Spring
57 80В-6801507-01 1 Sector
58 80В-6801526 4 Bush
59 80В-6801528 6 Axle
60 80В-6801032 4 Roller
61 80-6800006 20 Button
62 М8-6gх30.88.35.019 ГОСТ 7796-70 4 Bolt
63 80В-6807200 1 Bracket

- 369 -
Fig.68.4. Additional seat.

- 370 -
Group 68. Driver seat
Subgroup 6809. Additional seat

Fig. No. Pos.


Designation Q-ty Description
No.
68.4 1 М6-6Н.6.019 ГОСТ 5915-70 6 Nut
2 6Т ОСТ 37.001.115-75 6 Washer
3 С 6.01.019 ГОСТ 11371-78 10 Washer
4 М6-6gх30.88.35.019 ГОСТ 7798-70 4 Bolt
5 1221-6809020 1 Base
6 2522-6809012 20 Clamp
7 В.М8-6gх16.58.019 ГОСТ 17475-80 8 Screw
8 2522-6809030 2 Framework
9 2522-6809011 2 Cushion
10 2522-6809040 2 Boot
11 А30.04.017 2 Cap
12 М6-6gх16.88.35.019 ГОСТ 7798-70 2 Bolt
13 А37.08.019-01 1 Handrail seal
14 А37.07.011 1 Band
15 2522-6809060 1 Base
16 2522-6809006 1 Framework
17 8Т ОСТ 37.001.115-75 6 Washer
18 М8-6gх16.88.35.019 ГОСТ 7796-70 6 Bolt
19 10 ОТ ОСТ 37.001.115-75 2 Washer
20 70-6700031 2 Holder
21 70-6700116 2 Liner
22 50-3711038 2 Headlight support

- 371 -
*Variant

Fig.81.1. Heater

- 372 -
Group 81. Heater
Subgroup 8101. Heater

Fig. No. Pos.


Designation Q-ty Description
No.
81.1 80-8101720 Heater (16-22, 26, 29-36)
80-8101810 Panel (1-8, 27, 37-40, 46, 47-49)
80-8101830 Heater fitting (9-15, 43,51,52)
1 6х18 ОСТ 37.001.163-75 2 Pin
2 150.95.301 2 Air distributor
3 80-8100013 2 Liner
4 2х12.019 ГОСТ 397-79 2 Cotter pin
5 50-8400031 2 Axle
6 80-8100048 2 Loop
7 80-8101714-07 1 Seal
8 2х12.019 ГОСТ 397-79 2 Cotter pin
9 80-8100052 2 Plug
10 80-8100051 2 T-branch
11 XC-23 8 Clamp
12 80-8100023 1 Connecting pipe
13 80-3723045-01 3 Cuff
14 80-8102015-02 1 Hose L=1740 mm
15 80-8101015 1 Hose L=2080 mm
16 XC-76 1 Clamp
17 9742.3730 1 Electric motor
18 80-8104034 1 Rotor
19 М4-6Н.6.019 ГОСТ 5927-70 1 Nut
20 80-8104039 1 Ring
21 В.М4-6gх10.58.019 ГОСТ 17473-80 1 Screw
22 80-8101721 1 Brace
23 80-8101714-04 2 Seal
24 80-8101760 1 Cover
25 М6-6gх20.88.35.019 ГОСТ 7798-70 2 Bolt
26 6Т ОСТ 37.001.115-75 11 Washer
27 С 6.01.019 ГОСТ 6958-78 4 Washer
28 80-8104070 2 Filter
29 80-8101820 1 Suspension
30 М6-6Н.6.019 ГОСТ 5915-70 10 Nut
31 С 6.01.019 ГОСТ 11371-78 3 Washer
32 70У-8101070-А or 1 Heater radiator
РО-8101070 or 1 Heater radiator
41.035-1013010 or 1 Heater radiator
1216-8101060 1 Heater radiator
33 80-8101730-A 1 Cover
34 ПР32-06 2 Seal
35 80-8101800 1 Case
36 80-3703046-A 1 Pin
37 80-8100014 1 Rod
38 В.М6-6gх20.58.019 ГОСТ 17474-80 6 Screw
39 80-8100011-Б 1 Cover
40 80-8100012 2 Shutter
41 М8-6Н.6.019 ГОСТ 5915-70 4 Nut
42 С 8.01.019 ГОСТ 6958-78 2 Washer
43 80-8102015 1 Hose L=2230 mm
44 М8-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
45 A30.04.017-01 2 Cap
46 80-8100100 1 Panel
47 70-6702111 2 Angle piece

- 373 -
*Variant

Fig.81.1. Heater

- 374 -
Subgroup 8101. Heater

Fig. No. Pos.


Designation Q-ty Description
No.
81.1 48 М6-6gх16.88.35.019 ГОСТ 7798-70 2 Bolt
49 80-8101713 1 Upholstery
50 8Т ОСТ 37.001.115-75 2 Washer
51 BC-11 1 Cock
52 80-8102015-03 1 Hose L=450 mm

- 375 -
Fig.82.1. Internal rear-view mirror

Fig.82.2. Side rear-view mirror

Fig.82.3. Sun visor

- 376 -
Group 82. Cab accessories
Subgroup 8201. Internal rear-view mirror

Fig. No. Pos.


Designation Q-ty Description
No.
82.1 1 80-8201035 1 Mirror
2 М8-6gх25.88.35.019 ГОСТ 7796-70 1 Bolt
3 АЗО.04.071 1 Buckle
4 80П-8201025 1 Bracket
5 В.М6-6gх16.58.019 ГОСТ 17473-80 2 Screw
6 С 8.01.019 ГОСТ 11371-78 1 Washer
7 8Т ОСТ 37.001.115-75 1 Washer
8 М8-6Н.6.019 ГОСТ 5915-70 1 Nut

Group 82. Cab accessories


Subgroup 8201. Side rear-view mirror

Fig. No. Pos.


Designation Q-ty Description
No.
82.2 1 80-8201055 2 Side rear-view mirror
2 М8-6Н.6.019 ГОСТ 5915-70 2 Nut
3 8Т ОСТ 37.001.115-75 2 Washer
4 С 8.01.019 ГОСТ 11371-78 2 Washer
5 А30.04.051 2 Clamp
6 М8-6gх40.88.35.019 ГОСТ 7795-70 2 Bolt

Group 82. Cab accessories


Subgroup 8204. Sun visor

Fig. No. Pos.


Designation Q-ty Description
No.
82.3 80П-8204010 1 Sun visor (4-8)
1 М6-6Н.6.019 ГОСТ 5915-70 2 Nut
2 6Т ОСТ 37.001.115-75 2 Washer
3 С 6.01.019 ГОСТ 6958-78 2 Washer
4 70-8204011-А 1 Visor
5 В.М4-6gх10.58.019 ГОСТ 17473-80 5 Screw
6 70-8204015 1 Holder
7 70-8204014 1 Holder
8 80П-8204011-01 1 Axle

- 377 -
Fig.84.1. Facing

- 378 -
Group 84. Empennage
Subgroup 8400. Facing

Q-ty
Pos.
Fig. No Designation 900/900.2 950/950.2 Description
No.
920/920.2 952/952.2
84.1 90-8402030 1 1 Frame
1
90-8402030-01**
2 90-8402025-01 1 1 Right side piece
3 М10-6gх25.88.35.019 ГОСТ 7796-70 4 4 Bolt
С 10.01.019 ГОСТ 6958-78 4 4 Washer
10 ОТ ОСТ 37.001.115-75 4 4 Washer
4 90-8401080 1 1 Grill
5 С 6.01.019 ГОСТ 6958-78 34(26*) 34(26*) Washer
6 М6-6gх35.88.35.019 ГОСТ 7798-70 4 4 Bolt
7 6Т ОСТ 37.001.115-75 34(26*) 34(26*) Washer
8 90-8401120 1 1 Grill
9 М6-6gх20.88.35.019 ГОСТ 7798-70 2 2 Bolt
10 90-8402020 1 - Bonnet
90-8402020-01* 1 - Bonnet
90-8402020-02 - 1 Bonnet
90-8402020-03* - 1 Bonnet
11 90-8402320 1 Right side piece
90-8402320-01 - 1 Right side piece
12 90-8400021 1 1 Clamp
13 90-8402410 2 2 Left lock
90-8402410-01 2 2 Right lock
14 М6-6gх16.88.35.019 ГОСТ 7798-70 28(20*) 28(20*) Bolt
15 90-8401065 1 1 Support
16 90-8401040-01 1 1 Right bracket
90-8401040 1 1 Left bracket
17 М8-6gх20.88.35.019 ГОСТ 7796-70 8 8 Bolt
18 8Т ОСТ 37.001.115-75 8 8 Washer
19 90-8402310 1 1 Left side piece
20 90-8401060 1 1 Support
21 М12-6gх55.88.35.019 ГОСТ 7795-70 1 1 Bolt
М12-6Н.6.019 ГОСТ 5915-70 1 1 Nut
12 ОТ ОСТ 37.001.115-75 2 2 Washer
С 12.01.019 ГОСТ 6958-78 1 1 Washer
23 90-8401031 1 1 Left bracket
90-8401031-01 1 1 Right bracket
24 90-8401050-01 1 1 Left bracket
90-8401050 1 1 Right bracket
90-8401055* 1 1 Left bracket
90-8401055-01* 1 1 Right bracket
25 90-8402025 1 1 Left side piece
26 90-8400056-01 6(2*) 6(2*) Bush
27 4х10.019 ТУ РБ 400024166.001-2000 1 1 Wood screw
28 80-6105056 1 1 Handle
29 549А-1305044 1 1 Ring
30 80-8402410 1 1 Lock
31 М6-6Н.6.019 ГОСТ 5915-70 2 2 Nut
32 90-8402420-Б 1 1 Cramp
33 90-8400070 1 1 Rod
34 С 8.01.019 ГОСТ 6958-78 1 1 Washer
35 3,2х25.019 ГОСТ 397-79 1 1 Cotter pin
* Variant without side piece 90-8402310 and 90-8402320
** For external headlights

- 379 -
Fig.84.1. Facing

- 380 -
Group 84. Empennage
Subgroup 8400. Facing

Q-ty
Pos.
Fig. No Designation 900/900.2 950/950.2 Description
No.
920/920.2 952/952.2
84.1 36 90-8400012-Б 1 1 Bracket
37 90-8402075 2 2 Catch
38 90-8401020-Б** 1 1 Grill
39 70-6702111 1 1 Angle piece
40 С 4.01.019 ГОСТ 11371-78 1 1 Washer
41 90-8402050 1 1 Cable
42 70-4803023 1 1 Coupling
43 В.М5-6gх12.58.019 ГОСТ 17473-80 2 2 Screw
44 800-1109002 1 - Adapter
* Variant without side piece 90-8402310 and 90-8402320
** For external headlights

- 381 -
Fig.84.2а Facing (left-side view)

- 382 -
Fig.84.2b Facing (right-side view)

- 383 -
Fig.84.2c Facing (sections)

- 384 -
Group 84. Empennage
Subgroup 8400. Facing

Fig. No. Pos.


Designation Q-ty Description
No.
84.2а 1 950.3-8400015 1 Mask
84.2б 2 8Т ОСТ 37.001.115-75 45 Washer
84.2в 3 С 8.01.019 ГОСТ 6958-78 48 Washer
4 950.3-8400060 1 Bracket
5 923-8400060 1 Bracket
6 923-8400031 4 Axle
7 950.3-8400012-01 3 Mount
8 90-8400070-01 2 Rod
9 923-8400045 4 Loop
10 950.3-8400040 2 Support
11 М8-6gх25.88.35.019 ГОСТ 7796-70 16 Bolt
12 950.3-8400011 2 Mount
13 11.6.6308010 or 1 Gas spring
14 21054 1 Air-lift
15 950.3-8402020 1 Bonnet
16 90-8400012-Б 1 Bracket
17 1025-8402040-01 2 Brace
18 80-6708225 1 Bracket
19 80-8402410 1 Lock
20 920-8400190 1 Support
21 М6-6gх16.88.35.019 ГОСТ 7798-70 16 Bolt
22 С 6.01.019 ГОСТ 6958-78 44 Washer
23 6Т ОСТ 37.001.115-75 44 Washer
24 М8-6gх20.88.35.019 ГОСТ 7796-70 30 Bolt
25 70-4803023 1 Coupling
26 В.М5-6gх12.58.019 ГОСТ 17473-80 2 Screw
27 1021-8401065 1 Bracket
29 950.3-8401060 1 Pillar
30 822-8400080 1 Control cable
31 М12х1,25-6Н.6.019 ГОСТ 5915-70 1 Nut
32 70-3401093 6 Lever tip
33 М10-6Н.6.019 ГОСТ 5915-70 6 Nut
34 М10 3р/6gх35.66.019 ГОСТ 22034-76 4 Pin
35 950.3-8402310 1 Side piece
36 950.3-8402025-А 1 Frame
37 950.3-8400150 1 Bracket
39 950.3-8400035 2 Bracket
40 М10-6gх18.88.35.019 ГОСТ 7796-70 4 Bolt
41 С 10.01.019 ГОСТ 11371-78 4 Washer
42 10 ОТ ОСТ 37.001.115-75 4 Washer
43 950.3-8401050-01 1 Bracket
44 950.3-8400140-01 1 Support
45 950.3-8402320 1 Side piece
46 950.3-8401065 1 Pillar
47 1021-8401060 1 Bracket
48 923-8400033-02 2 Rod
49 950.3-8401050 1 Bracket
50 950.3-8400056-02 2 Bush
51 950.3-8400140 1 Support
52 С 16.01.019 ГОСТ 11371-78 4 Washer
53 3,2х25.019 ГОСТ 397-79 8 Cotter pin
54 80-6707096 1 Axle
55 1321-8402095-Б-01 4 Catch
56 923-8402095-Б 2 Catch

- 385 -
Group 84. Empennage
Subgroup 8400. Facing

Fig. No. Pos.


Designation Q-ty Description
No.
84.2а 57 549А-1305044 2 Ring
84.2б 58 950.3-8400056-01 2 Bush
84.2в 61 950.3-8400012 12 Mount
62 923-8402410 3
Lock
63 923-8402410-01 2
64 950.3-8402313 2
Hook end
65 950.3-8402313-01 2
66 950.3-8402318 1
67 950.3-8402318-01 1
Grill
68 950.3-8402319 1
69 950.3-8402322 1
70 950.3-8400050 1
Clamp
71 950.3-8400050-01 1
72 950.3-8400095 1 Grill
73 1221-8402420 1 Cramp
74 950.3-8400101 1 Bracket
75 950.3-8400102 1 Bracket
76 950.3-8401090 1 Grill
77 950.3-8400017 1
Grill
78 950.3-8400017-01 1
79 М6-6gх20.88.35.019 ГОСТ 7798-70 28 Bolt
80 М8-6Н.6.019 ГОСТ 5915-70 1 Nut (not shown in the figure)
81 WFS-4213 6 Self-tapping screw
82 950.3-8401087 1 Grill

- 386 -
84.3. Footstep

- 387 -
Group 84. Empennage
Subgroup 8405. Footstep
Fig. No. Pos.
Designation Q-ty Description
No.
84.3 80-8405005-Б 1 Left footstep (1-16)
80-8405005-Б-01 1 Right footstep (1-16)
1 80-8405020-А2 1 Footstep
2 С 10.01.019 ГОСТ 11371-78 8 Washer
3 М10-6gх50.88.35.019 ГОСТ 7795-70 4 Bolt
4 10 ОТ ОСТ 37.001.115-75 8 Washer
5 М10-6Н.6.019 ГОСТ 5915-70 6 Nut
6 80-8405010-АЗ 1 Footstep
7 М10-6gх25.88.35.019 ГОСТ 7796-70 2 Bolt
8 С 12.01.019 ГОСТ 11371-78 2 Washer
9 М12-6gх60.88.35.019 ГОСТ 7796-70 2 Bolt
10 80-8405031-Б 1 Bracket
11 12 ОТ ОСТ 37.001.115-75 4 Washer
12 М12-6gх30.88.35.019 ГОСТ 7796-70 2 Bolt
13 М12-6Н.6.019 ГОСТ 5915-70 3 Nut
14 923-6700111 2 Bush
15 80-8405030-Б 1 Bracket
80-8405030-Б-01 1 Bracket (of the right footstep – optionally)
16 80-8405032-Б 1 Bracket
17 М10-6gх30.88.35.019 ГОСТ 7796-70 2 Bolt

- 388 -
Fig.84.4. Front fenders (with FDA 72-2300020-А)

- 389 -
Group 84. Empennage
Subgroup 8403. Front fenders (with FDA 72-2300020-А)

Fig. No. Pos.


Designation Q-ty Description
No.
84.4 82-8403010-03/-04 1 Fender (1-25)
1 52-8403018 2 U-bolt
2 М12-6gх35.88.35.019 ГОСТ 7796-70 6 Bolt
3 12 ОТ ОСТ 37.001.115-75 7 Washer
4 52-8403011 1 Plate
5 82-8403021 1 Bracket
6 С 12.01.019 ГОСТ 11371-78 1 Washer
7 М12-6gх45.88.35.019 ГОСТ 7796-70 1 Bolt
8 М10-6Н.6.019 ГОСТ 5915-70 12 Nut
9 10 ОТ ОСТ 37.001.115-75 4 Washer
10 82-8403016 1 Bracket
11 80-8403041 2 Fender (metallic)
12 10Л ОСТ 37.001.115-75 8 Washer
13 С 10.01.019 ГОСТ 11371-78 8 Washer
14 80-8403030 2 Shutter
15 С 10.01.019 ГОСТ 6958-78 8 Washer
16 М10-6gх35.88.35.019 ГОСТ 7796-70 8 Bolt
17 500А-8507096 8 Choke
18 50-8400018 2 Choke
19 В.М6-6gх16.58.019 ГОСТ 17473-80 8 Screw
20 С 6.01.019 ГОСТ 11371-78 8 Washer
21 М6-6Н.6.019 ГОСТ 5915-70 8 Nut
22 80-8403013 2 Slat
23 50-1301165 8 Gasket
24 82-8403020 1 Bracket
25 82-8403016-Б 1 Bracket
Variant (plastic fenders)
82-8403010-А/-01 1 Fender (1-13, 15, 16, 24, 25)
1 52-8403018 2 U-bolt
2 М12-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
3 12 ОТ ОСТ 37.001.115-75 7 Washer
4 52-8403011 1 Plate
5 82-8403021 1 Bracket
6 С 12.01.019 ГОСТ 11371-78 1 Washer
7 М12-6gх45.88.35.019 ГОСТ 7796-70 1 Bolt
8 М10-6Н.6.019 ГОСТ 5915-70 12 Nut
9 10 ОТ ОСТ 37.001.115-75 4 Washer
10 82-8403016 1 Bracket
11 80-8403041-А-01 2 Fender (plastic)
12 10 ОСТ 37.001.115-75 8 Washer
13 С 10.01.019 ГОСТ 11371-78 8 Washer
15 С 10.01.019 ГОСТ 6958-78 8 Washer
16 М10-6gх35.88.35.019 ГОСТ 7796-70 8 Bolt
24 82-8403020 1 Bracket
25 82-8403016-Б 1 Bracket

- 390 -
Fig.84.5. Front fenders (for FDA 822-2300020-02 with elongated tubes)

- 391 -
Group 84. Empennage
Subgroup 8403. Front fenders (for FDA 822-2300020-02)

Fig. No. Pos.


Designation Q-ty Description
No.
84.5 822-8403010-02/-03 1 Fender (1-13)
1 822-8403011-Б 2 Base
2 М12-6gх60.88.35.019 ГОСТ 7796-70 8 Bolt
3 12 ОТ ОСТ 37.001.115-75 14 Washer
4 М12-6gх30.88.35.019 ГОСТ 7796-70 6 Bolt
5 822-8403015-01 1 Right pillar
6 М10-6Н.6.019 ГОСТ 5915-70 10 Nut
7 10Л ОСТ 37.001.115-75 10 Washer
8 С 10.01.019 ГОСТ 11371-78 10 Washer
9 80-4616017 10 Roller
10 С 10.01.019 ГОСТ 6958-78 10 Washer
11 М10-6gх40.88.35.019 ГОСТ 7796-70 10 Bolt
12 822-8403020* or 2 Fender
822-8403020-Б* or
1221-8403014-Б-02** or
1221-8403014-Б1-02**
13 822-8403015 1 Left pillar
* In case of fitting the tyres 13,6-20 or 13,6R20
** In case of fitting the tyres 360/70R24

- 392 -
Fig.84.6. Front fenders (for FDA 822-2300020-04 with short tubes)

- 393 -
Group 84. Empennage
Subgroup 8403. Front fenders
(for FDA 822-2300020-04 with short tubes)
Fig. No. Pos.
Designation Q-ty Description
No.
84.6 822-8403100/-01 1 Fender
1 822-8403110-01 1 Bracket
2 822-8403115-01 1 Pillar
3 822-8403120 1 Stop
4 М10-6gх40.88.35.019 ГОСТ 7796-70 20 Bolt
5 С 10.01.019 ГОСТ 6958-78 12 Washer
6 822-8403114 2 Fender
7 80-4616017 12 Roller
8 С 10.01.019 ГОСТ 11371-78 24 Washer
9 М10-6Н.6.019 ГОСТ 5915-70 18 Nut
10 10 ОТ ОСТ 37.001.115-75 16 Washer
11 822-8403109 2 Choke
12 822-8403107 2 Axle
13 822-8403106 1 Bracket
14 822-8403130 2 Stop
15 М12-6Н.6.019 ГОСТ 5915-70 4 Nut
16 822-8403101 4 Pin
17 М12-6gх60.88.35.019 ГОСТ 7796-70 8 Bolt
18 12 ОТ ОСТ 37.001.115-75 8 Washer
19 822-8403108 2 Base
20 822-8403129 2 Bush
21 20 ОТ ОСТ 37.001.115-75 2 Washer
22 М20-6Н.6.019 ГОСТ 5915-70 2 Nut
23 822-8403110 1 Bracket
24 М10-6gх35.88.35.019 ГОСТ 7796-70 2 Bolt
25 822-8403102 2 Spring
26 М12-6gх50.88.35.019 ГОСТ 7795-70 2 Bolt
27 822-8403120-01 1 Stop
28 822-8403115 1 Pillar
29 822-8403104 6 Strip
30 М10-6gх30.88.35.019 ГОСТ 7796-70 6 Bolt

- 394 -
Fig.87.1. Differential lock and PTO control (electrical part)
for Belarus- 920.2/920.3/952.2/952.3

- 395 -
Group 87. Control system
Subgroup 8700. Differential lock and PTO control (electrical part)
for Belarus- 920.2/920.3/952.2/952.3

Fig. No. Pos.


Designation Q-ty Description
No.
87.1 1 50-1702048 10 (max) Adjusting spacer
2 ВК 12-51 1 Switch
3 822-8700021 1 Pipe
4 1221-3724840-В 1 Bundle
5 1221-8700022 2 Clamp
6 8Т ОСТ 37.001.115-75 2 Washer
7 М8-6gх16.88.35.019 ГОСТ 7796-70 2 Bolt
8 80-3723045 14 Cuff
9 602602 1 Female connector
10 822-3724825 1 Bundle
11 1021-3724820 1 Bundle
12 1021-8700316 1 Panel
13 1221-6700411 1 Cover
14 ВМ6-6gx12.58.019 ГОСТ 17473-80 4 Screw
15 6Т ОСТ 37.001.115-75 8 Washer
16 1221-6700420 1 Base
17 М6-6Н.6.019 ГОСТ 5915-70 4 Nut
18 С6.01.019 ГОСТ 11371-78 2 Washer
19 М6-6gх35.88.35.019 ГОСТ 7798-70 2 Bolt
20 70-3723042-01 1 Bush
21 М5-6Н.6.019 ГОСТ 5927-70 4 Nut
22 5Т ОСТ 37.001.115-75 6 Washer
23 ВМ5-6gx16.58.019 ГОСТ 17475-80 4 Screw
24 2202.3603-34 or 2 Pilot lamp
12.3803-31
25 П150-06.17 or 1 Switch
П150М-06.14
26 П147-01.17 or 1 Switch
П147М-01.17
27 ВК12-1 1 Switch
28 ВМ6-6gx16.58.019 ГОСТ 17473-80 2 Screw
29 1522-8700221 1 Bracket
30 90.3747 2 Relay
31 80-3801021 2 Switch socket
32 1021-3724830-Д 1 Bundle

- 396 -

You might also like