Catalog No.

EWM108

Engineered Workholding Mechanisms

EXPERIENCE AND CAPABILITY

Speedgrip Chuck, Inc. has been designing and

building precision workholding products for
customers for nearly sixty years. Although
we have often been copied, we have not been
equalled in the experience or capability we

offer our customers in addressing their needs.

Whether you are looking for standard I.D. collet

workholding components or special design

and build Collet Chucks, Diaphragm Chucks,

Mechanical or Hydraulic Arbors, Speedgrip is

prepared to meet your requirements. Our sales
and engineering departments look forward to

reviewing your machining or inspection

applications and providing you with quality

Workholding Solutions.

QUALITY
Speedgrip manufactures workholding mechanisms and
components to meet customers exacting specifications.
After manufacture and during assembly our Quality Control
Inspectors evaluate every part and chucking mechanism to
insure that customers receive products that meet their
workholding needs every time.

2 Phone: (574)294-1506 Fax: (574)294-2465

 SPECIALS, DESIGN AND BUILD WORKHOLDING

Whether your parts require workholding for high volume production or they are just special enough

that they exceed our standards capability, Speedgrip’s sales and engineering departments have the

experience to provide you with the solutions to your workholding applications.

SALES ESTIMATORS
Our Sales Estimators are not just people who calculate costs
and take orders, they are project managers involved from your
request for quotation to final assembly and shipping. All our
estimators have hands-on shop manufacturing experience.
They use this experience in reviewing operations and
processes to insure the best possible pricing and expedient
delivery of your workholding assemblies.

ENGINEERING
With a full time staff of experienced Engineers and
state-of-the-art 3D CAD design hardware and software to
support and enhance their capabilities, Speedgrip is able to
offer customers complete engineering and design service. No
matter what the challenge, a speciality part, modified standard
or special design chuck, Speedgrip Engineers are directly
accessible to assist customers in creating Workholding
Solutions to meet their needs.

MANUFACTURING
Speedgrip is a 50,000 Sq. Ft. facility fully staffed and equipped
to provide customers with workholding products on site and on
time. We maintain a large inventory of raw material in stock
sizes to 17˝ and full machining capability of turning, milling and
grinding up to 48˝ diameter. With this size, inventory, and
capabilities, no jobs are delayed for lack of material or
production capacity.

E-mail: [email protected] Web Site: www.speedgrip.com 3

TABLE OF CONTENTS

Process Capability and

Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

6 Internal Diameter Workholding. . . . . . . . . . . . . . . . . . 6

External Diameter Collet Workholding. . . . . . . . . . . . 8

Diaphragm Chucks
Internal and External Gripping . . . . . . . . . . . . . . 10

8 Clamp and Finger Chucks . . . . . . . . . . . . . . . . . . . . 12

Expanding Mandrels for

Machining, Balancing, and Inspection . . . . . . 14

Gear Application Workholding . . . . . . . . . . . . . . . . . 16

10 Fixturing Applications. . . . . . . . . . . . . . . . . . . . . . . . 18

Special Use Workholding . . . . . . . . . . . . . . . . . . . . . 20

Thru-Hole Collet Chuck. . . . . . . . . . . . . . . . . . . . . . . 22

Collet Actuators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Air and Hydraulic Rotating Cylinders. . . . . . . . . 24-25

12 Standard Chucking Components . . . . . . . . . . . . . . . 26

15
18
16 20
4 Phone: (574) 294-1506 Fax: (574) 294-2465
 CAPABLE AND EXPERIENCED

Capable of addressing
your process needs—
Whether you are a small, medium, or large Production Facility,
a Product Manufacturer, an Outsource Supplier, an Original
Equipment Manufacturer or a Machine Tool Distributor,
Speedgrip Chuck can service your needs.

Engineered workholding solutions for:

• Turning • Milling • Grinding • Hobbing
• Shaving • Welding • Balancing • Inspection
• Fixture Building • Your Unique Use

Experienced in
Industry’s Applications
Automotive Industry:
Dealing with Engine, Transmission, or Drive Train components…
Aerospace Industry:
Parts relating to Turbines, Landing Gear, or Armament components…
Electric Motor Industry:
Holding tools for Strators, Armatures, or Housings…
Gear Industry, Manufacturing Gears, Inspecting Gears, or
Manufacturing and Selling Machines for those tasks…
Whatever your needs, Speedgrip Chuck offers you the
experience and expertise to provide you with

Engineered
Workholding
Solutions
E-mail: [email protected] Web Site: www.speedgrip.com 5
INTERNAL DIAMETER WORKHOLDING

Speedgrip experience in internal workholding goes far beyond our line of standard product
components. Engineered workholding mechanisms using single, double taper, split from one
end and other collet configurations can be designed and engineered to meet your
workholding needs.

SELF CONTAINED DOUBLE COLLET

Automotive disk brake rotors require machining accuracy to
establish good concentricity, squareness and satisfactory
“in-balance” condition. All too often, rotors are totally
machined and the remaining non-functional cast surfaces
cause balance problems.
REF# B-15961
A leading rotor manufacturer instituted an inspection process
for the balance problem. Out-of-balance castings could be
recognized prior to the machining operation by using a self-
contained double collet chuck.

The chuck, produced by Speedgrip, grips one end of the rotor

for certain checks and then can be reversed and gripped on
the opposite end. This end-to-end check then allows
determination of casting quality prior to the investment of
expensive machining operations.

REF# B-22184 REF# B-32367

Split From One End Collet Chuck used by an automotive engine Self Contained Balancing Chuck Assembly with alternately
manufacturer in a gear cutting operation. slotted collet produced for a balancing machine manufacturer
dealing with a transmission component balancing operation.

6 Phone: (574)294-1506 Fax: (574)294-2465

 REF# B-33006
Split From One End Collet Chuck used by an ˝off road˝
automotive equipment manufacturer in a face milling operation
of frame castings.

REF# B-33533
Reverse Taper Collet Chuck for dead length positioning and
drawbar actuation is used by an O.E.M. manufacturer for use on
parts where pull-back is not desired due to possible distortion.

REF# 7A-EWM
Dual I.D. Collet Chuck Part Ejector w/ Stir-Around feature for
drawbar actuation. This chuck was designed for manufacture
of a part requiring holding on two bores simultaneously.

REF# B-33153
REF# B-33581 Split From One End Collet Chuck for drawtube mount to
Double Taper Collet Chuck with auxiliary and manual swing Okuma Turning Center. It is used by an electric motor
Clamp for Manual Actuation. It is used in a Casting and machining manufacturer in a grooving operation on step end motor caps.
operation for use on long blind, or stepped bored parts.

E-mail: [email protected] Web Site: www.speedgrip.com 7

EXTERNAL DIAMETER COLLET WORK HOLDING

When you need to grip the O.D. surface for I.D. machining applications, Speedgrip provides External

diameter Collet Chucks in a variety of configurations to meet your specifications.

REF# B-30286 REF# B-33198

Split From One End Collet Chuck with internal workstop used Split From One End Collet Chuck drawbar actuated, with flush
in a turning operation. slots for chip removal used in a turning operation.

REF# B-33226 REF# B-30629

Split From One End Collet Chuck with Adjustable Throw used Split From One End Collet Chuck with Radial Load Pin and
by a major small engine manufacturer in a crankshaft grinding access slots for an autoloader. This collet is used by an air
operation conditioner compressor manufacturer in a turning operation.

8 Phone: (574)294-1506 Fax: (574)294-2465

 REF# C-9124
Split From One End Collet Chuck for clutch/hub transmission
part used by an auto manufacturer in a turning, facing and
boring operation.
REF# B-33494
Split From One End Collet Chuck
for drawbar actuation used by a
major heavy equipment
manufacturer in shaping I.D. and
O.D. of teeth for a ring gear.

REF# Q-33562
Single Taper O.D. Collet Chuck with interchangeable collets to
REF# B-27975 address a family of parts for second operation machining.
Single Taper Collet Chuck for drawbar actuation built for an
O.E.M. machine manufacturer for boring and facing gear
components.

E-mail: [email protected] Web Site: www.speedgrip.com 9

DIAPHRAGM CHUCKS

The diaphragm principle of chucking can be used for many different applications.

Parts can be held internally or externally. Depending on the design of the diaphragm, parts can be
chucked lightly or with extreme pressure. In all applications it is necessary to chuck on a machined
surface. In many applications the natural spring tension of the diaphragm material provides the grip

force for chucking the work piece. In some applications the use of drawbar pressure can provide

additional grip force. Many chucks are self-contained, having a built-in air cylinder. Air usually

reaches the cylinder by means of a rotary coupling and an air line.

REF# 10A-EWE
O.D. Diaphragm Chuck used on a gear shaver in the production of
automotive gears. Drawbar action is used to open the chuck and to provide
additional power for chucking. The chuck is equipped with replaceable,
hardened, ground pads. A hardened ground ring is used to rest the work
part on. Mounting holes are capped to keep out dirt.

REF# B-15553
REF# B-15553 (unloaded)
Gear Pitch Diaphragm Chuck used for Grinding Transmission
Gears. Many transmission parts require that inner bearing
diameters be ground concentric to outer gear pitch diameters.
When helical outer gear configurations are involved, it is difficult
to allow gripping jaws to travel toward the chuck center and
simultaneously follow the helical angles of the piece part teeth.
Speedgrip design engineers elected to utilize a 3 jaw diaphragm
type chuck due to its inherent high degree of accuracy. Each
jaw contained a rotating pitch pin which could turn slightly to
match the helix as it traveled in toward the center to grip the
part, thus concentricity within tenths of a thousandth, could be
held within the desired specifications.

10 Phone: (574)294-1506 Fax: (574)294-2465

 QUALITY CRAFTED, COST EFFICIENT AND CAPABLE . . .

REF# 33286
Double Diaphragm Chuck with combination
spring and drawbar assist used to grip O.D. for
I.D. machining operation.

REF# B4380
O.D. Diaphragm Chuck w/Self Contained Actuation for use in
grinding aircraft engine parts. The gauge shown in chuck was
REF# 32903 used to check accuracy and chucking power before shipping.
O.D. Diaphragm Chuck w/ jaw inserts, spring assist to grip
and a drawbar for release. This chuck is used by a major
gear manufacturer for face drilling of holes in a gear blank.

E-mail: [email protected] Web Site: www.speedgrip.com 11

CLAMP AND FINGER CHUCKS

When gripping a part on the diameter means that stress will be induced, creating distortion, Clamp
Finger Chucks allow for linear holding so that these parts can be machined in their relaxed state.

REF# Q-25152
Face Clamping Chuck with I.D. Collet for Centralizing Part.
Used by an electric motor manufacturer for a turning and
facing operation on aluminum end bell housings.

REF# B-15771
Pull Back Clamp Chuck with Center Face Driver. REF# Q-33866
It is used by a truck transmission manufacturer for a shaft Finger Chuck with Drawbar Actuation. It is designed to grip a
turning operation. sleeve component. The part is loaded on center plug when the
fingers engage and the plug retreats.

12 Phone: (574)294-1506 Fax: (574)294-2465

 QUALITY CRAFTED, COST EFFICIENT AND CAPABLE . . .

REF# B-32178
This Chuck was built for a machine tool manufacturer who was
supplying tooling to a steering assembly manufacturer. It
REF# B-32180 centralizes the steering knuckle with a collet, then has a swing
Face Clamping Chuck with Radial Locator Mechanism. Used clamp actuated by a drawbar to grip the part for an O.D.
by a truck engine manufacturer to locate part radially and face machining operation.
clamp for wrist pin bore cross drill.

REF# Q-33173
This mechanism was designed to grip I.D. bore and with extended clamping arms to dampen casting for I.D. machining operation.

E-mail: [email protected] Web Site: www.speedgrip.com 13

EXPANDING MANDRELS FOR MACHINING...

Speedgrip mandrels are fast, accurate, and are used for inspection as well as the machining of parts.

Expandable mandrels often eliminate the necessity of holding close tolerances in a bore just to
accommodate old style solid mandrels.

DOUBLE TAPER MANDRELS AND CHUCKS

REF# 14A-EWE

REF# 14B-EWE REF# 14C-EWE

REF# 14A-EWE REF# 14C-EWE

Draw bar actuated No. 4 double taper, Speedgrip Chuck. The Tailstock actuated special double taper mandrel with the collet
double taper collet is sealed to protect bearing surfaces, and is removed, thus two of the four husky keys that are used for
5 1/2˝ in diameter and 8˝ long. The top end of the collet is driving the collet can be seen. The keys are inserted in milled
chamfered for ease of loading. pockets in the mandrel. The large hole through the shank
accommodates a driving pin. These features are used on
applications where heavy cuts require greater driving power.
REF# 14B-EWE This particular mandrel is used on an automatic lathe where
Manually actuated No. 3, double taper mandrel that was designed
several tools are cutting simultaneously. The double taper collet
to meet the requirements of a specific job. The work-parts are
is expanded with pressure from an air operated tailstock.
positioned against the ground flange face of the mandrel to insure
machined surfaces are square with the bore.

14 Phone: (574)294-1506 Fax: (574)294-2465

 ...BALANCING AND INSPECTION

SPECIAL SINGLE TAPER MANDRELS

REF# 15A-EWE
Balancing mandrel. Speedgrip designs hundreds of mandrels
and chucks for manufacturers and users of dynamic and static
balancing equipment. REF# 15D-EWS
Machining mandrel. The above figure shows a 22˝ long
mandrel that is used in machining pump components.

REF# B-33476
Machining mandrel for a 12˝ x 60˝ cylinder housing for an In-
line piston pump manufacturer. The mandrel has the part
loaded at a separate station. It would then be placed between
centers of a lathe for O.D. turn operations.
REF# 15B-EWE
REF# 15C-EWE
Inspection mandrels. The above figures show special mandrels
used to inspect tractor parts.

E-mail: [email protected] Web Site: www.speedgrip.com 15

GEAR APPLICATION WORKHOLDING

Whether you need to grip on the pitch diameter, the major or minor diameter, Speedgrip can provide
you with the collets and tooling to produce qualified gear components.

REF# B-33187
REF# B-33187 (unloaded) REF# B-33492
Upper/ Lower clamp Hobbing Arbor used by a hobbing machine This Drawbar Operated Hobbing Arbor using a double taper
manufacturer to centralize gear with collet and grip part Collet and upper/lower clamp assembly was made for an
between upper and lower clamp. O.E.M. machine manufacturer to produce automotive gears.

REF# B-33475
Push on Collet Hobbing Arbor used by a major heavy equipment manufacturer.
Upper assembly guided by lower. Collet expands centralizing part and then clamp.

16 Phone: (574)294-1506 Fax: (574)294-2465

 QUALITY CRAFTED, COST EFFICIENT AND CAPABLE . . .

REF# B-1845
Large 23˝ Diameter Spline Collets for
gripping on the pitch diameter of a part.

REF# 17A-EWE-2
I.D. Gripping Chuck for gripping on the
pitch diameter of a part.

REF# Q-32750
Spring Clamp/Collet Chuck w/Air Release used by a truck
transmission manufacturer. The ring gear is centralized on the
internal diameter collet then gripped by spring clamps for REF# B-33468
turning and facing. I.D. Collet chuck w/Manual Actuation & Tailstock Clamp Top
Plate used by a heavy equipment manufacturer in shaping O.D.
gear teeth.

E-mail: [email protected] Web Site: www.speedgrip.com 17

FIXTURING APPLICATIONS

When workholding needs go beyond a chucking mechanism, Speedgrip has the capability to

incorporate fixturing concepts into tooling to address specific machining requirements.

REF# Q-33512
Fixture Assembly with I.D. Collet Chuck using a segmented
collet. Hydraulic cylinder integrated for actuation. Used by an
original equipment machine builder in a facing operation.

REF# 18C-EWE
REF# 18D-EWE
In order to grip a universal joint yoke while boring its (2) cross
trunnion holes, a problem of loading was encountered. Machine
space and necessary clamping area prohibited the piece part
from being loaded straight into the collet. The problem was
solved by tilting the collet assembly at an upward angle as
shown in 18C. The piece part was easily loaded into the collet
then pivoted downward to horizontal position, as shown in 18D.
REF# Q-32108 The collet was activated and the clamp secured to provide a
Tailstock Chuck Assembly with built-in actuation
rigid and accurate means for part holding.
used by a hydraulic cylinder manufacturer for use
in a headstock/tailstock chucking application.

18 Phone: (574)294-1506 Fax: (574)294-2465

 QUALITY CRAFTED, COST EFFICIENT AND CAPABLE . . .

REF# Q-33213 REF# 19C-EWE

Fixture using Two I.D. Collet chucks, one round, one diamond
8 Station Tombstone for Manual Actuation on a Horizontal
and hydraulic swing clamp. Actuation is hydraulic/spring
Machining Center. Ideal for multi-load and presentation of parts
release. Used by a marine engine manufacturer for holding
to the cutting tool.
engine block and boring crankshaft holes.

REF# B-16446
Sub-Plate Fixture w/ Two I.D. Diaphragm Chucks mounted
for piston application. This arrangement is ideal for a
horizontal machining center with a shuttle pallet or vertical REF# B-33534
machining centers. Inspection Stand with Double Taper Collet mechanism and
self-contained actuator for hand spinning and checking part
concentricity.

E-mail: [email protected] Web Site: www.speedgrip.com 19

SPECIAL USE WORKHOLDING

Not all applications can be addressed by standard workholding concepts. Speedgrip has the
engineering capability and experience to look beyond conventional solutions to meet your particular
workholding needs.

REF# B-33370
This Chuck was designed for an automotive manufacturer to
REF# 20A-EWE locate the power steering rack off its teeth so that the internal
Finger Chuck used by a small engine manufacturer to locate worm could be form ground.
and grip pistons for an O-ring groove operation.

REF# B-15329
Key Chuck used by an auto engine
manufacturer to grip piston casting for
first operation machining.

20 Phone: (574)294-1506 Fax: (574)294-2465

 QUALITY CRAFTED, COST EFFICIENT AND CAPABLE . . .

REF# 21A-EWE
Compensating Cyl-Chuck designed for use on thin wall first
operation parts. An air bladder allows the jaws to float
independently so that the part can be gripped and machined
without inducing stress.

REF# Q-33230
A Special Chuck designed for a customer using centrifugal
REF# 21B-EWE casting in their manufacturing process. The mold is gripped
Self-Centering Cyl-Chuck used by an aircraft manufacturer to and spun at 400 RPM then cast iron at 1500 degrees
perform second turning on turbine rings. centigrade is poured into it.

E-mail: [email protected] Web Site: www.speedgrip.com 21

THRU-HOLE COLLET CHUCK

The Thru-Hole Collet Chuck is designed primarily

for gripping of bar or tube stock. It features a QUICK CHANGE CAPABILITY

master collet with interchangeable collet pads to
accommodate a wide range of bar sizes.

Actuation can be accomplished by drawtube or through spindle

hydraulics. The chuck utilizes this draw force plus spring
pressure to securely grip the part. In the event of system
failure, springs continue applying holding force, resulting in a
fail-safe feature.

This chuck is designed for quick-changeover, maximum

freedom from chip and coolant entry, high RPM operation and
close tolerance repeatability.

The Thru-Hole Collet Chuck emphasizes quick and easy

serviceability and is built to traditionally high levels of
workmanship and quality. Part sizes available from 1⁄2 ˝ to 3˝
and 41⁄2 ˝ to 6˝ using standard pads.
LARGE BAR CAPACITY
Speedgrip inspection standards call for T.I.R. reading of within
.0005 prior to shipment. This repeatability is measured at the
insert pad mounting seat. Final accuracy is
dependent upon the accuracy inherent in
the collet pads.

Specials Quoted Pending Application…

22 Phone: (574)294-1506 Fax: (574)294-2465
 COLLET ACTUATORS

SPRING CHUCKING AIR OR HYDRAULIC RELEASE

Standard, Self-contained Speedgrip Actuators are practical for hundreds of applications. Spring pressure
is utilized for chucking the work, thus minimizing the possibility of part loss resulting from air failure. Air

or hydraulic pressure releases the work. The actuator mounts to an intermediate ADAPTER which
mounts to the spindle nose. Prices for intermediate adapters will be quoted upon application.

Actuators for AIR chucking and SPRING release can also be supplied if desired. Special actuators
larger or smaller than standard sizes listed, are available. Special front plates can also be supplied for
standard Actuators to accept our JF locators or other special chucks. Various size chuck assemblies

that cover a range of sizes from 1⁄2˝ to 17˝ can be mounted in the four different size actuators.

DRAWSCREW
ADAPTER SIZES
ACTUATOR ADAPTER THD.
NO. NO. SIZE
D-8416 #10-32
D-8417 1/4-20
C-8358 D-8418 3/8-16
& C-8360 D-8419 1/2-13
D-8420 3/8-11
D-8421 3/4-16
D-8424 3/8-16
C-8369 D-8425 1/2-13
D-8426 5/8-11
C-8369 D-8427 3/4-16
& C-8370 D-6428 1˝-8

FLANGE ACTUATOR A B C D E F G H J K L M N P Q
SIZE NO. MIN MAX
4˝ C-8358 7-3/4 2-7/32 9/16 2-3/4 3-7/16 3/8-16 4-3/8 1-5/8 1-3/4 3/8-16 1/2 3 7/16 19/32 5/8 5/8
6˝ C-8360 7-3/4 2-15/16 9/16 2-3/4 3-7/16 3/8-16 6-3/8 1-5/8 2-1/2 1/2-13 1/2 4 7/16 19/32 5/8 5/8
10˝ C-8369 11-1/2 3-27/32 13/16 3-3/4 5 1/2-13 10 2-7/8 3-3/4 5/8-11 15/16 4 9/16 3/4 1-1/2 7/8
13˝ C-8370 14-1/2 3-27/32 13/16 3-3/4 6 1/2-13 13 2-7/8 4-7/8 5/8-11 1˝ 4 9/16 3/4 1-1/2 7/8

NOTE—WHEN ORDERING, SPECIFY: 1) ACTUATOR NO. 2) DRAWSCREW ADAPTER NO. 3) AIR OR HYDRAULIC RELEASE
ACTUATOR WILL ACCEPT ANY STANDARD SINGLE, DOUBLE, OR REVERSE TAPER SPEEDGRIP CHUCK HAVING THE CORRESPONDING FLANGE SIZE.
SPRING COMBINATION CAN BE ALTERED IF NEEDED DUE TO AVAILABLE RELEASE PRESSURE.

E-mail: [email protected] Web Site: www.speedgrip.com 23

AIR AND HYDRAULIC ROTATING CYLINDERS
Speedgrip Chuck introduces…

The New Generation

of rotating air and hydraulic cylinders.
Features:
• High speed rotation up to 7000 RPMs
• Higher operating pressure up to 1000 PSI (hyd)
• Directly interchangeable with most existing
cylinder models
• Enhanced reliability with accompanying
limited warranty.
Options:
• Third port for fluid distribution
• Tail rod
• Safety check valves
• Proximity switches/trip dogs
• Special stroke lengths
• Special piston rods
Service available for most competitors’ models
The New Generation of rotating cylinders is built to the highest quality
standards with expanded service for complete customer satisfaction.

MODEL DESIGNATION (ordering example)

SG 4-1/2 A W P B
Develop
model Feature Description Symbol
number by Bore Specify in inches
selecting the
symbols that
Style Air A
represent the
cylinder with Hydraulic H
the features Safety With W
and options
required. Checks Without O
Place them in Third Porting P
the sequence Tail Rod R
as shown. Options
Proximity Brackets B
(available with third port and tail rod models only)

24 Phone: (574)294-1506 Fax: (574)294-2465

 QUALITY CRAFTED, COST EFFICIENT AND CAPABLE . . .

AIR WITH SAFETY CHECKS (B+.25)

E B 1.00 RETRACTED
HYD WITH SAFETY CHECKS (B+.38)
.31

.250-18 NTP
˝P˝ Only

+.001
Ø .500 'F' THREAD -.000
˝R˝ Only 'G' DEPTH ØD

ØC
Ø3.80

ØA
L
(Li)
1.0 MIN
1.0 MAX + STROKE
˝R ONLY˝

P DRAIN (HYD) VENT (AIR) 'H' THREAD

'J' DEPTH
R EXTENDED PORT 'K' (EQ) SP
S RETRACT PORT

DIMENSIONAL DATA
Ø BORE E M
(in) A B C D F G H J K L Li
˝O˝ MODEL ˝W˝ MODEL ˝P˝ MODEL ˝R˝ MODEL ˝P˝ MODEL ˝R˝ MODEL
*3 5.75 9.25 1.00 3.000 2.91 2.91 3.09 3.03 .750-16 1.80 .500-13 1.0 4 1.875 n/a 1.23 .63
HYDRAULIC

4-1/2 5.75 9.25 1.25 3.000 2.91 2.91 3.09 3.03 .750-16 1.80 .500-13 1.0 4 1.875 n/a 1.23 .63
6 7.40 9.76 1.50 4.500 2.91 2.91 3.09 3.03 1.000-14 2.00 .500-13 1.0 4 2.75 n/a 1.23 .63
8 9.40 9.76 1.75 4.500 2.91 2.91 3.09 3.03 1.250-12 2.30 .500-13 1.0 8 2.75 n/a 1.23 .63
10 11.40 9.76 2.0 6.000 2.91 2.91 3.09 3.03 1.500-14 2.30 .625-11 1.1 8 4.75 n/a 1.23 .63
*3 4.60 8.33 1.00 3.000 2.91 2.91 3.09 3.03 .750-16 1.75 .375-16 .75 4 1.875 n/a 1.23 .63
4-1/2 5.80 8.33 1.00 3.000 2.91 2.91 3.09 3.03 .750-16 1.75 .375-16 .75 4 1.875 n/a 1.23 .63
6 7.40 8.83 1.25 4.500 2.91 2.91 3.09 3.03 .750-16 1.75 .500-13 1.00 4 2.75 n/a 1.23 .63
AIR

8 9.60 8.83 1.25 4.500 2.91 2.91 3.09 3.03 .750-16 1.75 .500-13 1.00 4 2.75 n/a 1.23 .63
10 11.60 8.83 1.50 6.000 2.91 2.91 3.09 3.03 1.000-14 2.00 .625-1 11.00 6 3.50 4.75 1.23 .63
12 13.50 8.83 1.50 6.000 2.91 2.91 3.09 3.03 1.000-14 2.00 .625-18 1.12 6 3.50 4.75 1.23 .63

DIMENSIONAL DATA PORTING DATA

Ø BORE DRAIN VENT RETRACTED EXTENDED SPEED PRESSURE STROKE
(in) P R S EXTEND PORT RETRACT PORT PORT AREA (sq in) AREA (sq in) (rpm) (psi) (in)
*3 1.56 1.56 2.09 SAE #10 SAE #10 SAE #6 6.1 6.8 7,000 1,000 1.0
HYDRAULIC

4-1/2 1.56 1.56 2.09 SAE #10 SAE #10 SAE #6 14.3 15.5 7,000 1,000 1.5
6 1.56 1.56 2.09 SAE #10 SAE #10 SAE #6 25.9 27.7 7,000 1,000 2.0
8 1.56 1.56 2.09 SAE #10 SAE #10 SAE #6 47.3 49.6 7,000 1,000 2.0
10 1.56 1.56 2.09 SAE #10 SAE #10 SAE #6 74.8 77.9 7,000 1,000 2.0
*3 .63 1.13 1.69 SAE #8 SAE #8 SAE #8 6.3 7.1 7,000 150 1.0
4-1/2 .63 1.13 1.69 SAE #8 SAE #8 SAE #8 15.1 15.9 7,000 150 1.0
6 .63 1.13 1.69 SAE #8 SAE #8 SAE #8 27.0 28.3 7,000 150 1.5
AIR

8 .63 1.13 1.69 SAE #8 SAE #8 SAE #8 49.0 50.3 7,000 150 1.5
10 .63 1.13 1.69 SAE #8 SAE #8 SAE #8 76.8 78.5 7,000 150 1.5
12 .63 1.13 1.69 SAE #8 SAE #8 SAE #8 111.3 113.1 7,000 150 1.5
*Safety checks not available for 3˝ models.

E-mail: [email protected] Web Site: www.speedgrip.com 25

STANDARD CHUCKING COMPONENTS

Speedgrip manufactures a full line of standard

I.D. Collet Chucks and Locators for manual or
drawbar actuation, and Between Center
Mandrels, with many items in stock. Various
Single Taper, Double Taper, and Reverse Taper
collets in various sizes from .500 to 17˝ diameter
are standard with special sizes and
configurations available by quote.

Air and hydraulic actuators with spring chucking feature

available for stationary or rotating applications.

Spindle adapters for various machines

Nose Plates in 4˝, 6˝, 10˝, and 13˝ diameters.
Nose Plates drilled and tapped to accommodate workstops.

Collets in various tapers with .0005

repeatability standard.

Draw Screw for manual or

drawbar actuation.

26 Phone: (574)294-1506 Fax: (574)294-2465

 QUALITY CRAFTED, COST EFFICIENT AND CAPABLE . . .

STANDARD CHUCKING ASSEMBLY LOCATOR ASSEMBLY

For use with spindle adapters which provide the For use as a fixture component with its ground pilot, for
“stir-around” feature for accuracy. Supplied for manual or position accuracy. Designed for manual or drawbar actuation
drawbar actuation and applicable to turning, milling, on subplates, angle plates and tombstones.
grinding and many other uses.

BETWEEN CENTER MANDREL ASSEMBLIES

Primarily for between center workholding applications but
adaptable to hobbing, inspection and other applications.

SINGLE TAPERS DOUBLE TAPERS REVERSE TAPERS

Provide parts with radial grip force Ideal for bores with longer diameter to For parts that require ˝dead length˝
while pulling them back against a length ratios, stepped bores, or blind positioning or parts that may be
locating surface for zero position bores where radial grip force and ˝pull- subject to distortion, this taper only
accuracy. Ideal for bores with longer back˝ action for locating the part is provides radial grip force.
diameter to length ratios, stepped required.
bores or blind bores.

E-mail: [email protected] Web Site: www.speedgrip.com 27

 Engineered Workholding Mechanisms 2000 Industrial Parkway
Elkhart, IN 46515
(574) 294-1506 • FAX: (574) 294-2465
e-mail: [email protected]

Speedgrip Chuck
Standard Chucking Mechanisms
Speedgrip manufactures a full line of standard I.D. Collet Chucks and Locators for
manual or drawbar actuation, and Between Center Mandrels. Also available are
various Single Taper, Double Taper and Reverse Taper Collets.

Engineered Workholding Mechanisms

Whether your parts require workholding for high volume production or they are just
special enough that they exceed our standards capability, Speedgrip’s sales and
engineering departments have the experience to provide you with custom design
solutions for your workholding application.

The New Generation of Rotating Air and Hydraulic Cylinders

A fresh new approach utilizing the latest in Rotating Cylinder Technology. The New
Generation of Rotating Cylinders is built to the highest quality standards with
expanded service for complete customer satisfaction.
www.speedgrip.com

Cameron
Hydraulic Expanding Chucks and Arbors
Cameron produces a precision line of workholding Chucks and
Arbors based on a unique method of metal flexing. This principle
assures extended tool life, greatly improved concentricity and
tremendous gripping strength.

Sabertooth Standard and Special Engineered Expanding Mandrels

Another speciality product of the Cameron Company, Sabertooth
provides mechanical sleeve style expanding mandrels for parts that
require gripping force over the full length of the part.
www.cameron-workholding.com

Madison Face Driver

Complete O.D. Machining in One Operation
Madison Face Driver, builds a full line of Elastomer, Hydraulic and Quick
Change type Face Drivers for complete O.D. Machining in one clamping.

Hydra-Drive
The newest technology on the market in Face Driving has the convenience of
a Face Driver with the accuracy of a Hydraulic Arbor. The center point is held
on centerline within .0002 T.I.R. by the hydraulic shell. Lateral positioning of
the part is constant since the center point is locked into position.

www.facedrivers.com

05/13
HG010430 Cat#EWM108