Tarea Fluidos Solucionario

© 2014 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved.
This material is protected under all copyright laws as they currently

exist. No portion of this material may be reproduced, in any form or by any means, without permission in writing from the publisher.
1–1. Represent each of the following quantities with combi

nations of units in the correct SI form, using an appropriate
prefix: (a) GN # mm, (b) kg >mm, (c) N>ks2, (d) kN>ms.
Solution
a) GN # mm = (109)N(10-6)m = 103 N # m = kN # m Ans.
3 -6 9
b) kg>mm = (10 )g>(10 )m = 10 g>m = Gg>m Ans.
c) N>ks2 = N>(103 s)2 = 10-6 N>s2 = mN>s2 Ans.

3 -6 9
d) kN>ms = (10 )N>(10 )s = 10 N>s = GN>s Ans.
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
a) kN # m
b) Gg>m
c) µN>s2
d) GN>s
1
© 2014 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved. This material is protected under all copyright laws as they currently
1–2. Evaluate each of the following to three signifi

cant figures, and express each answer in SI units using
an appropriate prefix: (a) (425 mN)2, (b) (67 300 ms)2,
(c) 3 723 ( 106 ) 4 1>2 mm.
Solution
a) (425 mN)2 = 3 425 ( 10-3 ) N 4 2 = 0.181 N2 Ans.
b) (67 300 ms) = 3 67.3 ( 10

2 3
)( 10 ) s 4 = 4.53 ( 10 ) s
-3 2 3 2
Ans.
c) 3 723 ( 106 ) 4 1>2 mm = 3 723 ( 106 ) 4 1>2 ( 10-3 ) m = 26.9 m Ans.
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
a) 0.181 N2
b) 4.53 ( 103 ) s2
c) 26.9 m
2
1–3. Evaluate each of the following to three signifi

cant figures, and express each answer in SI units using
an appropriate prefix: (a) 749 mm>63 ms, (b) (34 mm)
(0.0763 Ms)>263 mg, (c) (4.78 mm)(263 Mg).
Solution
a) 749 mm>63 ms = 749 ( 10-6 ) m>63 ( 10-3 ) s = 11.88 ( 10-3 ) m>s
= 11.9 mm>s Ans.
b) (34 mm)(0.0763 Ms)>263 mg = 3 34 ( 10-3 ) m4 3 0.0763 ( 106 ) s4 > 3 263 ( 10-6 )( 103 ) g4
= 9.86 ( 106 ) m # s>kg = 9.86 Mm # s>kg Ans.
c) (4.78 mm)(263 Mg) = 3 4.78 ( 10 ) m 4 3 263 ( 10 ) g 4

-3 6
= 1.257 ( 106 ) g # m = 1.26 Mg # m Ans.
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
a) 11.9 mm>s
b) 9.86 Mm # s>kg
c) 1.26 Mg # m
3
*1–4. Convert the following temperatures: (a) 20°C to

degrees Fahrenheit, (b) 500 K to degrees Celsius, (c) 125°F
to degrees Rankine, (d) 215°F to degrees Celsius.
Solution
5
a) TC = (T - 32)
9 F
5
20°C = (T - 32)
9 F
TF = 68.0°F Ans.
b) TK = TC + 273
500 K = TC + 273
. We or
m W ina g
TC = 227°C Ans.
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
c) TR = TF + 460
an on in rs h
k g rn to rig
TR = 125°F + 460 = 585°R Ans.
or in a uc y
w d le tr p
er ld
5
e lu nt ns co
d) TC = (T - 32)
9 F
th inc de f i es
of rk ( stu e o tat
5
ity o g us d S
TC = (215°F - 32) = 102°C Ans.

9
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
4
1–5. Mercury has a specific weight of 133 kN>m3 when the

temperature is 20°C. Determine its density and specific
gravity at this temperature.
Solution
g = rg
133 ( 103 ) N>m3 = rHg ( 9.81 m>s2 )
rHg = 13 558 kg>m3 = 13.6 Mg>m3 Ans.

3
rHg 13 558 kg>m
SHg = = = 13.6 Ans.
rw 1000 kg>m3
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
rHg = 13.6 Mg>m3
SHg = 13.6
5
1–6. The fuel for a jet engine has a density of 1.32 slug>ft 3.
If the total volume of fuel tanks A is 50 ft3, determine the
weight of the fuel when the tanks are completely full.
Solution
The specific weight of the fuel is
g = rg = ( 1.32 slug>ft 3 )( 32.2 ft>s2 ) = 42.504 lb>ft 3
Then, the weight of the fuel is
W = g V = ( 42.504 lb>ft 3 )( 50 ft 3 ) = 2.13 ( 103 ) lb = 2.13 kip Ans.
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
g = 42.5 lb>ft 3
W = 2.13 kip
6
1–7. If air within the tank is at an absolute pressure of

680 kPa and a temperature of 70°C, determine the weight
of the air inside the tank. The tank has an interior volume
of 1.35 m3.
Solution
From the table in Appendix A, the gas constant for air is R = 286.9 J>kg # K.
p = rRT
680 ( 103
) N>m2 = r(286.9 J>kg # K)(70° + 273) K
r = 6.910 kg>m3
The weight of the air in the tank is
W = rg V = ( 6.910 kg>m3 )( 9.81 m>s2 )( 1.35 m3 )
. We or
= 91.5 N Ans.
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
91.5 N
7
*1–8. The bottle tank has a volume of 1.12 m3 and contains

oxygen at an absolute pressure of 12 MPa and a temperature
of 30°C. Determine the mass of oxygen in the tank.
Solution
From the table in Appendix A, the gas constant for oxygen is R = 259.8 J>kg # K.
p = rRT
12 ( 106
) N>m2 = r(259.8 J>kg # K)(30° + 273) K
r = 152.44 kg>m3
The mass of oxygen in the tank is
m = rV = ( 152.44 kg>m3 )( 0.12 m3 )
. We or
= 18.3 kg Ans.
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
8
1–9. The bottle tank has a volume of 0.12 m3 and contains

oxygen at an absolute pressure of 8 MPa and temperature of
20°C. Plot the variation of the pressure in the tank (vertical
axis) versus the temperature for 20°C … T … 80°C. Report
values in increments of ∆T = 10°C.
Solution
20 30 40 50 60 70 80 p(MPa)
TC (°C)
p(MPa) 8.00 8.27 8.55 8.82 9.09 9.37 9.64 10
9
From the table in Appendix A, the gas constant for oxygen is R = 259.8 J>(kg # K). 8
For T = (20°C + 273) K = 293 K,
7
p = rRT 6
8 ( 106 ) N>m2 = r3259.8 J>(kg # K) 4(293 K)
. We or
5
m W ina g
b)
r = 105.10 kg>m3
ed e n
in
no W iss ea s
itt id tio
is e D t w
4
t p or em ch
d th g. in t la
Since the mass and volume of the oxygen in the tank remain constant, its density will 3
an on in rs h
also be constant.
k g rn to rig
or in a uc y 2
w d le tr p
er ld
p = rRT
e lu nt ns co
1
p = ( 105.10 kg>m3 ) 3259.8 J>(kg # K) 4(TC + 273)
th inc de f i es
of rk ( stu e o tat
0 TC (ºC)
p = (0.02730 TC + 7.4539) ( 106 ) Pa 10 20 30 40 50 60 70 80
ity o g us d S
(a)
p = (0.02730TC + 7.4539) MPa where TC is in °C.
te is ss th ite
in f th se for Un
The plot of p vs TC is shown in Fig. a.

gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
p = (0.0273 Tc + 7.45) MPa, where Tc is in C°
9
1–10. Determine the specific weight of carbon dioxide

when the temperature is 100°C and the absolute pressure
is 400 kPa.
Solution
From the table in Appendix A, the gas constant for carbon dioxide is R = 188.9 J>kg # K.
p = rRT
400 ( 103
) N>m2 = r(188.9 J>kg # K)(100° + 273) K
r = 5.677 kg>m3
The specific weight of carbon dioxide is
g = rg = ( 5.677 kg>m3 )( 9.81 m>s2 )
. We or
= 55.7 N>m3 Ans.
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
55.7 N>m3
10
1–11. Determine the specific weight of air when the

temperature is 100°F and the absolute pressure is 80 psi.
Solution
From the table in Appendix A, the gas constant for the air is R = 1716 ft # lb>slug # R.
p = rRT
12 in. 2
80 lb>in2 a b = r(1716 ft # lb>slug # R)(100° + 460) R
1 ft
r = 0.01200 slug>ft 3
The specific weight of the air is
. We or
g = rg = ( 0.01200 slug>ft 3 )( 32.2 ft>s2 )
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
= 0.386 lb>ft 3 Ans.
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
0.386 lb>ft 3
11
*1–12. Dry air at 25°C has a density of 1.23 kg>m3. But if it

has 100% humidity at the same pressure, its density is
0.65% less. At what temperature would dry air produce this
same density?
Solution
For both cases, the pressures are the same. Applying the ideal gas law
with r1 = 1.23 kg>m3, r2 = ( 1.23 kg>m3 ) (1 - 0.0065) = 1.222005 kg>m3 and
T1 = (25°C + 273) = 298 K,
p = r1 RT1 = ( 1.23 kg>m3 ) R (298 K) = 366.54 R
Then
p = r2RT2; 366.54 R = ( 1.222005 kg>m3 ) R(TC + 273)

TC = 26.9°C Ans.
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
12
1–13. The tanker carries 1.5(106) barrels of crude oil in its

hold. Determine the weight of the oil if its specific gravity is
0.940. Each barrel contains 42 gallons, and there are
7.48 gal>ft 3.
Solution
The specific weight of the oil is
go = Sogw = 0.940 ( 62.4 lb>ft 3 ) = 58.656 lb>ft 3
Weight of one barrel of oil:
1 ft 3
Wb = goV = ( 58.656 lb>ft 3 ) (42 gal>bl) a b
7.48 gal
= 329.4 lb>bl
. We or
Total weight:
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
W = 1.5 ( 106 ) bl(329.4 lb>bl)
d th g. in t la

an on in rs h
= 494 ( 106 ) lb Ans.
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
494 (106 ) lb
13
1–14. Water in the swimming pool has a measured depth

of 3.03 m when the temperature is 5°C. Determine its 9m
approximate depth when the temperature becomes 35°C.
Neglect losses due to evaporation.
4m
Solution
From Appendix A, at T1 = 5°C, 1rw 2 1 = 1000.0 kg>m3. The volume of the water is
V = Ah. Thus, V1 = (9 m)(4 m)(3.03 m). Then
m m
(rw)1 = ; 1000.0 kg>m3 = 2
V1 36 m (3.03 m)
m = 109.08 ( 103 ) kg
At T2 = 35°C, (rw)2 = 994.0 kg>m3. Then
m 109.08 ( 103 )
; 994.0 kg>m3 =
. We or
(rw)2 =
V2 ( 36 m2 ) h
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
h = 3.048 m = 3.05 m Ans.
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
3.05 m
14
1–15. The tank contains air at a temperature of 15°C and

an absolute pressure of 210 kPa. If the volume of the tank is
5 m3 and the temperature rises to 30°C, determine the mass
of air that must be removed from the tank to maintain the
same pressure.
Solution
For T1 = (15 + 273) K = 288 K and R = 286.9 J>kg # K for air, the ideal gas
law gives
p1 = r1RT1; 210 ( 103 ) N>m2 = r1(286.9 J>kg # K)(288 K)

r1 = 2.5415 kg>m3
Thus, the mass of air at T1 is
m1 = r1V = ( 2.5415 kg>m3 )( 5 m3 ) = 12.70768 kg
For T2 = (273 + 30) K = 303 K and R = 286.9 J>kg # K
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
p2 = r1RT2; 210(103) N>m2 = r2(286.9 J>kg # K)(303 K)
is e D t w
t p or em ch
d th g. in t la
an on in rs h
r2 = 2.4157 kg>m3
k g rn to rig
or in a uc y
Thus, the mass of air at T2 is m2 = r2V = ( 2.4157 kg>m3 )( 5 m3 ) = 12.07886 kg
w d le tr p
er ld
e lu nt ns co
th inc de f i es
Finally, the mass of air that must be removed is

of rk ( stu e o tat
∆m = m1 - m2 = 12.70768 kg - 12.07886 kg = 0.629 kg Ans.

ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
0.629 kg
15
*1–16. The tank contains 2 kg of air at an absolute pressure

of 400 kPa and a temperature of 20°C. If 0.6 kg of air is added
to the tank and the temperature rises to 32°C, determine the
pressure in the tank.
Solution
For T1 = 20 + 273 = 293 K, p1 = 400 kPa and R = 286.9 J>kg # K for air, the ideal
gas law gives
p1 = r1RT1; 400(103) N>m2 = r1(286.9 J>kg # K)(293 K)
r1 = 4.7584 kg>m3
Since the volume is constant. Then

m1 m2 m2
V = = ;r = r1
r1 r2 2 m1
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
Here m1 = 2 kg and m2 = (2 + 0.6) kg = 2.6 kg
is e D t w
t p or em ch
d th g. in t la
2.6 kg
an on in rs h
r2 = a b ( 4.7584 kg>m3 ) = 6.1859 kg>m3
k g rn to rig
2 kg or in a uc y
w d le tr p
er ld
e lu nt ns co
Again applying the ideal gas law with T2 = (32 + 273) K = 305 K
th inc de f i es
p2 = r2RT2 = ( 6.1859 kg>m3 ) (286.9 J>kg # k)(305 K) = 541.30 ( 103 ) Pa

of rk ( stu e o tat
ity o g us d S
= 541 kPa Ans.

te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
16
1–17. The tank initially contains carbon dioxide at an

absolute pressure of 200 kPa and temperature of 50°C. As
more carbon dioxide is added, the pressure is increasing at
25 kPa>min. Plot the variation of the pressure in the tank
(vertical axis) versus the temperature for the first 10 minutes.
Report the values in increments of two minutes.
Solution
p(kPa) 200 225 250 275 300 325
TC(°C) 50.00 90.38 130.75 171.12 211.50 251.88
From the table in Appendix A, the gas constant for carbon dioxide is
R = 188.9 J>(kg # K). For T = (50°C + 273) K = 323 K,
p = rRT
200 ( 103 ) N>m2 = r3188.9 J>(kg # K) 4(323 K)
. We or
r = 3.2779 kg>m3
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
Since the mass and the volume of carbon dioxide in the tank remain constant, its
an on in rs h
density will also be constant.
k g rn to rig
or in a uc y
w d le tr p
p = rRT
er ld
e lu nt ns co
p = ( 3.2779 kg>m3) 3188.9 J>(kg # K)4(TC + 273) K

th inc de f i es
of rk ( stu e o tat
p = (0.6192 TC + 169.04) ( 103 ) Pa

ity o g us d S
p = (0.6192 TC + 169.04) kPa where TC is in °C

te is ss th ite
in f th se for Un
The plot of p vs TC is shown in Fig. a

gr w in e
th t o a ly by
y ar d le d
p(kPa)
ro p an o te
st ny s d s ec
350
de f a rse de ot
s
ill o u vi pr
300
w le co ro is
sa eir is p rk
250
th d wo
200
an his
e
T
150
100
50
0 TC (ºC)
50 100 150 200 250 300
(a)
Ans:
p = (0.619 Tc + 169) kPa, where Tc is in C°
17
1–18. Kerosene has a specific weight of gk = 50.5 lb>ft 3

and benzene has a specific weight of gb = 56.2 lb>ft 3.
Determine the amount of kerosene that should be mixed
with 8 lb of benzene so that the combined mixture has a
specific weight of g = 52.0 lb>ft 3.
Solution
The volumes of benzene and kerosene are given by
Wb 8 lb
gb = ; 56.2 lb>ft 3 = Vb = 0.1423 ft 3
Vb Vb
Wk Wk
gk = ; 50.5 lb>ft 3 = Vk = 0.019802 Wk
Vk Vk
The specific weight of mixture is
. We or
Wm Wk + 8 lb
; 52.0 lb>ft 3 =
m W ina g
g =
b)
ed e n
in
no W iss ea s
Vm 0.1423 ft 3 + 0.019802 Wk
itt id tio
is e D t w
t p or em ch
d th g. in t la
Wk = 20.13 lb = 20.1 lb Ans.
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
20.1 lb
18
1–19. The 8-m-diameter spherical balloon is filled with

helium that is at a temperature of 28°C and a pressure of
106 kPa. Determine the weight of the helium contained in the
4
balloon. The volume of a sphere is V = pr 3.
3
Solution
For Helium, the gas constant is R = 2077 J>kg # K. Applying the ideal gas law at
T = (28 + 273) K = 301 K,
p = rRT; 106(103) N>m2 = r(2077 J>kg # K)(301 K)

r = 0.1696 kg>m3
Here
4 3 4 256
V = pr = p(4 m)3 = p m3
3 3 3
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
Then, the mass of the helium is
is e D t w
t p or em ch
d th g. in t la
256
an on in rs h
M = r V = ( 0.1696 kg>m3 ) a p m3 b = 45.45 kg
k g rn to rig
3 or in a uc y
w d le tr p
er ld
e lu nt ns co
Thus,
th inc de f i es
of rk ( stu e o tat
W = mg = ( 45.45 kg )( 9.81 m>s2 ) = 445.90 N = 446 N Ans.

ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
446 N
19
*1–20. Kerosene is mixed with 10 ft3 of ethyl alcohol so

that the volume of the mixture in the tank becomes 14 ft3.
Determine the specific weight and the specific gravity of the
mixture.
Solution
From Appendix A,
rk = 1.58 slug>ft 3
rea = 1.53 slug>ft 3
The volume of kerosene is
Vk = 14 ft 3 - 10 ft 3 = 4 ft 3
Then the total weight of the mixture is therefore
. We or
m W ina g
b)
ed e n
W = rk g Vk + rea g Vea
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
= (1.58 slug>ft 3)(32.2 ft>s2)(4 ft 3) + (1.53 slug>ft 3)(32.2 ft>s2)(10 ft 3)
an on in rs h
= 696.16 lb
k g rn to rig
or in a uc y
w d le tr p
er ld
The specific weight and specific gravity of the mixture are
e lu nt ns co
th inc de f i es
W 696.16 lb
of rk ( stu e o tat
gm = = = 49.73 lb>ft 3 = 49.7 lb>ft 3 Ans.

V 14 ft 3
ity o g us d S
49.73 lb>ft 3
te is ss th ite
gm
Sm = = = 0.797 Ans.
in f th se for Un
gw 62.4 lb>ft 3
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
20
1–21. The tank is fabricated from steel that is 20 mm

thick. If it contains carbon dioxide at an absolute pressure
of 1.35 MPa and a temperature of 20°C, determine the total
weight of the tank. The density of steel is 7.85 Mg>m3, and
the inner diameter of the tank is 3 m. Hint: The volume of
4
a sphere is V = a bpr 3.
3
Solution
From the table in Appendix A, the gas constant for carbon dioxide is
R = 188.9 J>kg # K.
p = rRT
1.35 ( 10
6
) N>m2 = rco(188.9 J>kg # K)(20° + 273) K
rco = 24.39 kg>m3
Then, the total weight of the tank is
. We or
W = rst g Vst + rco g Vco
m W ina g
b)
ed e n
in
no W iss ea s
3 3
itt id tio
4 3.04 3.00
is e D t w
3 7.85 ( 103 ) kg>m3 4 ( 9.81 m>s2 ) a
t p or em ch
W = b(p) c a mb - a mb d
d th g. in t la
3 2 2
an on in rs h
3
4 3.00
k g rn to rig
+ ( 24.39 kg>m3 )( 9.81 m>s2 ) a b(p)a mb
or in a uc y
3 2
w d le tr p
er ld
e lu nt ns co
W = 47.5 kN Ans.
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
47.5 kN
21
1–22. What is the increase in the density of helium when

the pressure changes from 230 kPa to 450 kPa while the
temperature remains constant at 20°C? This is called an
isothermal process.
Solution
Applying the ideal gas law with T1 = (20 + 273) K = 293 K, p1 = 230 kPa and
R = 2077 J>(kg # k),
p1 = r1RT1; 230 ( 103 ) N>m2 = r1(2077 J>(kg # K))(293 K)

r1 = 0.3779 kg>m3
For p2 = 450 kPa and T2 = (20 + 273) K = 293 K,
p2 = r2RT2; 450 ( 103 ) N>m2 = r2(2077 J>(kg # k))(293 K)

r2 = 0.7394 kg>m3
. We or

m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
Thus, the change in density is
t p or em ch
d th g. in t la
an on in rs h
∆r = r2 - r1 = 0.7394 kg>m3 - 0.3779 kg>m3 = 0.3615 kg>m3
k g rn to rig
= 0.362 kg>m3
or in a uc y Ans.
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
0.362 kg>m3
22
1–23. The container is filled with water at a temperature 1m

of 25°C and a depth of 2.5 m. If the container has a mass of
30 kg, determine the combined weight of the container and
the water.
2.5 m
Solution
From Appendix A, rw = 997.1 kg>m3 at T = 25°C. Here the volume of water is
V = pr 2h = p(0.5 m)2(2.5 m) = 0.625p m3
Thus, the mass of water is
Mw = rwV = 997.1 kg>m3 ( 0.625p m3 ) = 1957.80 kg
The total mass is
MT = Mw + Mc = (1957.80 + 30) kg = 1987.80 kg
. We or
m W ina g
b)
ed e n
in
no W iss ea s
Then the total weight is
itt id tio
is e D t w
t p or em ch
d th g. in t la
WT = MT g = (1987.80 kg) ( 9.81 m>s2 ) = 19500 N = 19.5 kN Ans.
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
19.5 kN
23
*1–24. The rain cloud has an approximate volume of

6.50 mile3 and an average height, top to bottom, of 350 ft. If
a cylindrical container 6 ft in diameter collects 2 in. of
water after the rain falls out of the cloud, estimate the total 350 ft
weight of rain that fell from the cloud. 1 mile = 5280 ft.
Solution 6 ft
The volume of rain water collected is Vw = p(3 ft) 2
1 2
12 ft 2 3
= 1.5p ft . Then, the
weight of the rain water is Ww = gwVw = ( 62.4 lb>ft 3 )( 1.5p ft 3 ) = 93.6p lb. Here,
the volume of the overhead cloud that produced this amount of rain is
Vc ′ = p(3 ft)2(350 ft) = 3150p ft 3
Thus,
W 93.6p lb
gc = = = 0.02971 lb>ft 3
Vc ′ 3150p ft 3
. We or
m W ina g
b)
ed e n
Then
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
lb 52803 ft 3
Wc = gcVc = a0.02971 b c (6.50) a bd
an on in rs h
k g rn to rig
ft 3 1
or in a uc y
w d le tr p
= 28.4 ( 109 ) lb
er ld
Ans.
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
24
1–25. If 4 m3 of helium at 100 kPa of absolute pressure and

20°C is subjected to an absolute pressure of 600 kPa while
the temperature remains constant, determine the new
density and volume of the helium.
Solution
From the table in Appendix A, the gas constant for helium is R = 2077 J>kg # K,
p1 = r1RT1
100 ( 103
) N>m3 = r(2077 J>kg # K)(20° + 273) K
r1 = 0.1643 kg>m3
T1 = T2
p1 r1RT1
. We or
=
m W ina g
p2 r2RT2
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
p1 r1
d th g. in t la
=
p2 r2
an on in rs h
k g rn to rig
100 kPa 0.1643 kg>m3 or in a uc y
w d le tr p
er ld
=
e lu nt ns co
600 kPa r2
th inc de f i es
r2 = 0.9859 kg>m3 = 0.986 kg>m3 Ans.

of rk ( stu e o tat
ity o g us d S
The mass of the helium is

te is ss th ite
m = r1V1 = ( 0.1643 kg>m3 )( 4 m3 ) = 0.6573 kg

in f th se for Un
gr w in e
th t o a ly by
Since the mass of the helium is constant, regardless of the temperature and pressure,
y ar d le d
ro p an o te
m = r2V2
st ny s d s ec
de f a rse de ot
0.6573 kg = ( 0.9859 kg>m3 ) V2

s
ill o u vi pr
V2 = 0.667 m3 Ans.
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
r2 = 0.986 kg>m3, V2 = 0.667 m3
25
1–26. Water at 20°C is subjected to a pressure increase

of 44 MPa. Determine the percent increase in its density.
Take EV = 2.20 GPa.
Solution
∆r m>V2 - m>V1 V1
= = - 1
r1 m>V1 V2
To find V1 >V2, use EV = - d p > ( dV>V ) .
dV dp
= -
V EV
V2 p
LV1 V EV Lp1
dV 1 2
= - dp
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
V1
t p or em ch
1
d th g. in t la
ln a b = ∆p
V2 EV
an on in rs h
k g rn to rig
V1 or in a uc y
= e ∆p>EV
w d le tr p
er ld
e lu nt ns co
V2
th inc de f i es
So, since the bulk modulus of water at 20°C is EV = 2.20 GPa,

of rk ( stu e o tat
ity o g us d S
∆r
= e ∆p>EV - 1
te is ss th ite
r1
in f th se for Un
= e (44 MPa)>2.20 GPa) - 1

gr w in e
th t o a ly by
= 0.0202 = 2.02, Ans.

y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
2.02,
26
1–27. A solid has a specific weight of 280 lb > ft3. When a

pressure of 800 psi is applied, the specific weight increases to
295 lb > ft3. Determine the approximate bulk modulus.
Solution
g = 280 lb>ft 3
dp
EV = -
dV
V
Since
W dg
V = , dV = - W 2
g g
. We or
m W ina g
b)
Thus
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
- dp dp
d th g. in t la
EV = =
dg dg
an on in rs h
c - W 2 n( W>g ) d
k g rn to rig
g g
or in a uc y
w d le tr p
er ld
e lu nt ns co
Therefore
th inc de f i es
800 lb>in2
of rk ( stu e o tat
EV = = 14.9 ( 103 ) lb>in2 Ans.

295 lb>ft 3 - 280 lb>ft 3
ity o g us d S
a b
te is ss th ite
280 lb>ft 3
in f th se for Un
gr w in e
Note: The answer is approximate due to using g = gi. More precisely,

th t o a ly by
y ar d le d
L
ro p an o te
dp
st ny s d s ec
800
= 15.3 ( 103 ) lb>in2
de f a rse de ot
EV = =
s
dg
L g
ln (295>280)
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
14.9 ( 103 ) lb>in2
27
*1–28. If the bulk modulus for water at 70°F is 319 kip > in2,
determine the change in pressure required to reduce its
volume by 0.3%.
Solution
Use EV = - dp> ( dV>V ) .
dV
dp = -EV
V
pf Vf
Lpi LVi V
dV
∆p = dp = - EV
V - 0.03V
= - ( 319 kip>in2 ) ln a b
V
. We or
m W ina g
b)
ed e n
= 0.958 kip>in2 (ksi) Ans.
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
28
1–29. Sea water has a density of 1030 kg>m3 at its surface,

where the absolute pressure is 101 kPa. Determine its density
at a depth of 7 km, where the absolute pressure is 70.4 MPa.
The bulk modulus is 2.33 GPa.
Solution
Since the pressure at the surface is 101 kPa, then ∆ p = 70.4 - 0.101 = 70.3 MPa.
Here, the mass of seawater is constant.
M = r0V0 = rV
V0
r = r0 a b
V
To find V0 >V, use EV = - dp> ( dV>V ) .
. We or
L V EV L
dV 1
m W ina g
b)
ed e n
= - dp
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
V 1
an on in rs h
ln a b = - ∆p
k g rn to rig
V0 EV or in a uc y
w d le tr p
er ld
e lu nt ns co
V0
= e ∆p>EV
th inc de f i es
V
of rk ( stu e o tat
ity o g us d S
So,
te is ss th ite
r = r0e ∆p>EV
in f th se for Un
gr w in e
= ( 1030 kg>m3 ) e (70.3 MPa>2.33 GPa)

th t o a ly by
y ar d le d
= 1061.55 kg>m3
ro p an o te
st ny s d s ec
= 1.06 ( 10 3
) kg>m
3
Ans.
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
1.06 ( 103 ) kg>m3
29
1–30. The specific weight of sea water at its surface is

63.6 lb>ft 3, where the absolute pressure is 14.7 lb>in2. If at a
point deep under the water the specific weight is 66.2 lb>ft 3,
determine the absolute pressure in lb>in2 at this point. Take
EV = 48.7 ( 106 ) lb>ft 2.
Solution
Use EV = - dp> ( dV>V ) and the fact that since the mass and therefore the weight of
the seawater is assumed to be constant, mg = g1V1 = g2V2, so that V2 >V1 = g1 >g2.
L LV
dV
dp = -EV
V2
∆p = - EV ln a b
V1
g1
= -EV ln a b
. We or
g2
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
p = p0 + ∆p
an on in rs h
k g rn to rig
1 ft 2 63.6 lb>ft 3
= 14.7 lb>in2 - 3 48.7 ( 106 ) lb>ft2 4 a
or in a uc y
b ln a b
w d le tr p
er ld
12 in. 66.2 lb>ft 3
e lu nt ns co
= 13.6 ( 103 ) psi

th inc de f i es
Ans.
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
13.6 ( 103 ) psi
30
1–31. A 2-kg mass of oxygen is held at a constant tempera

ture of 50° and an absolute pressure of 220 kPa. Determine
its bulk modulus.
Solution
dp dpV
EV = - = -
dV>V dV
p = rRT
dp = drRT
drRT V drpV
EV = - = -
dV rdV
m
r =
. We or
V
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
mdV
t p or em ch
dr = -
d th g. in t la
V2
an on in rs h
k g rn to rig
mdV pV or in a uc y
EV = = P = 220 kPa Ans.
w d le tr p
er ld
2
V (m>V)dV
e lu nt ns co
th inc de f i es
Note: This illustrates a general point. For an ideal gas, the isothermal (constant-
of rk ( stu e o tat
temperature) bulk modulus equals the absolute pressure.

ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
220 kPa
31
*1–32. At a particular temperature the viscosity of an oil is

m = 0.354 N # s>m2. Determine its kinematic viscosity. The
specific gravity is So = 0.868. Express the answer in SI and
FPS units.
Solution
The density of the oil can be determined from
ro = Sorw = 0.868 ( 1000 kg>m3 ) = 868 kg>m3

mo 0.354 N # s>m2
yo = r = = 0.4078 ( 10-3 ) m2 >s = 0.408 ( 10-3 ) m2 >s Ans.
o 868 kg>m3
In FPS units,
m2 1 ft 2
yo = c 0.4078 ( 10-3 ) dc d
. We or
s 0.3048 m
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
= 4.39 ( 10-3 ) ft 2 >s
is e D t w
Ans.
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
32
1–33. The kinematic viscosity of kerosene is

y = 2.39 ( 10-6 ) m2 >s. Determine its viscosity in FPS units.
At the temperature considered, kerosene has a specific
gravity of Sk = 0.810.
Solution
The density of kerosene is
rk = Sk rw = 0.810 ( 1000 kg>m3 ) = 810 kg>m3
Then,
mk = yrk = 3 2.39 ( 10-6 ) m2 >s 4 ( 810 kg>m3 )
0.3048 m 2
3 1.9359 ( 10-3 ) N # s>m2 4 a
lb
= ba b
4.4482 N 1 ft
= 40.4 ( 10-6 ) lb # s>ft 2
. We or
Ans.
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
40.4 ( 10 - 6 ) lb # s>ft 2
33
1–34. An experimental test using human blood at T = 30°C

indicates that it exerts a shear stress of t = 0.15 N>m2
on surface A, where the measured velocity gradient at
the surface is 16.8 s-1. Since blood is a non-Newtonian fluid,
determine its apparent viscosity at the surface. A
Solution
du
Here = 16.8 s-1 and t = 0.15 N>m2. Thus
dy
du
t = ma ; 0.15 N>m2 = ma ( 16.8 s-1 )
dy
ma = 8.93 ( 10-3 ) N # s>m2 Ans.
Realize that blood is a non-Newtonian fluid. For this reason, we are calculating the
apparent viscosity.
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
8.93 ( 10 - 3 ) N # s>m2
34
1–35. Two measurements of shear stress on a surface

and the rate of change in shear strain at the surface for a
fluid have been determined by experiment to be
t1 = 0.14 N>m2, (du>dy)1 = 13.63 s-1 and t2 = 0.48 N>m2,
(du>dy)2 = 153 s-1. Classify the fluid as Newtonian or
non-Newtonian.
Solution
Applying Newton’s Law of viscosity,
b ; 0.14 N>m2 = m1 ( 13.63 s-1 ) m1 = 0.01027 N # s>m2

du
t1 = m1a
dy 1
b ; 0.48 N>m2 = m2 ( 153 s-1 ) m2 = 0.003137 N # s>m2

du
t2 = m2 a
dy 2
Since m1 ≠ m2 then m is not constant. It is an apparent viscosity. The fluid is

non-Newtonian. Ans.
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
non-Newtonian
35
*1–36. When the force of 3 mN is applied to the plate the B B¿ 3 mN

line AB in the liquid remains straight and has an angular rate
of rotation of 0.2 rad > s. If the surface area of the plate in u 4 mm
contact with the liquid is 0.6 m2, determine the approximate
viscosity of the liquid.
A
Solution
The shear stress acting on the fluid contact surface is
P 3 ( 10-3 ) N N
t = = = 5 ( 10-3 ) 2
A 0.6 m2 m
Since line AB′ is a straight line, the velocity distribution will be linear. Here, the
velocity gradient is a constant.
The velocity of the plate is

#
. We or
U = au = (0.004 m)(0.2 rad>s) = 0.8 ( 10-3 ) m>s
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
Then,
d th g. in t la
an on in rs h
k g rn to rig
du
t = m or in a uc y
dy
w d le tr p
er ld
e lu nt ns co
0.8 ( 10-3 ) m>s

th inc de f i es
5 ( 10-3 ) N>m2 = m a b
of rk ( stu e o tat
0.004 m
m = 0.025 N # s>m2
ity o g us d S
Ans.
te is ss th ite
Alternatively,
in f th se for Un
gr w in e
th t o a ly by
du
t = m
y ar d le d
dt
ro p an o te
st ny s d s ec
5 ( 10-3 ) N>m2 = m(0.2 rad>s)

de f a rse de ot
m = 0.025 N # s>m2
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
36
1–37. When the force P is applied to the plate, the velocity 24 mm/s P
profile for a Newtonian fluid that is confined under the
plate is approximated by u = (12y1>4) mm>s, where y is
16 mm
in mm. Determine the shear stress within the fluid at u
y = 8 mm. Take m = 0.5 ( 10-3 ) N # s>m2.
y
Solution
Since the velocity distribution is not linear, the velocity gradient varies with y.
u = 12y1>4
du
= 3y-3>4
dy
At y = 8 mm,
= 0.5 ( 10-3 ) N # s>m2 3 3(8 mm)-3>4 s-1 4

du
t = m
. We or
dy
m W ina g
b)
ed e n
in
no W iss ea s
t = 0.315 mPa Ans.
itt id tio
is e D t w
t p or em ch
d th g. in t la
du
an on in rs h
Note: W
hen y = 0, S ∞ , so that t S ∞. Hence the equation can not be used at
k g rn to rig
dy or in a uc y
this point.
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
0.315 mPa
37
1–38. When the force P is applied to the plate, the velocity 24 mm/s P
profile for a Newtonian fluid that is confined under the plate
is approximated by u = ( 12y1>4 ) mm>s, where y is in mm.
16 mm
Determine the minimum shear stress within the fluid. Take u
m = 0.5 ( 10-3 ) N # s>m2.
y
Solution
u = 12y1>4
du
= 3y-3>4
dy
The velocity gradient is smallest when y = 16 mm. Thus,
3 0.5 ( 10-3 ) N # s>m2 4 3 3(16 mm)-3>4 s-14

du
t min = m =
. We or
dy
m W ina g
b)
ed e n
in
no W iss ea s
t min = 0.1875 mPa Ans.
itt id tio
is e D t w
t p or em ch
d th g. in t la
du
an on in rs h
Note: W
hen y = 0, S ∞, so, that t S ∞. Hence the equation can not be used at
k g rn to rig
dy or in a uc y
this point.
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
0.1875 mPa
38
1–39. The velocity profile for a thin film of a Newtonian 36 mm/s P

fluid that is confined between a plate and a fixed surface is
defined by u = (10y - 0.25y2) mm>s, where y is in mm.
Determine the shear stress that the fluid exerts on the plate 4 mm
and on the fixed surface. Take m = 0.532 N # s>m2.
u
y
Solution
u = ( 10y - 0.25y2 ) mm>s

du
= (10 - 0.5y) s-1
dy
At the plate
= ( 0.532 N # s>m2 ) 3 10 - 0.5(4 mm) s-1 4 = 4.26 Pa

du
tp = m Ans.
. We or
dy
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
At the fixed surface
d th g. in t la
an on in rs h
= ( 0.532 N # s>m2 ) 3 (10 - 0) s-1 4 = 5.32 Pa
du
k g rn to rig
tfs = m or in a uc y Ans.
dy
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
tp = 4.26 Pa, tfs = 5.32 Pa
39
*1–40. The velocity profile for a thin film of a Newtonian 36 mm/s P

fluid that is confined between the plate and a fixed surface
is defined by u = (10y - 0.25y2) mm>s, where y is in mm.
Determine the force P that must be applied to the plate to 4 mm
u
cause this motion. The plate has a surface area of 5000 mm2 y
in contact with the fluid. Take m = 0.532 N # s>m2.
Solution
u = ( 10y - 0.25y2 ) mm>s

du
= (10 - 0.5y) s-1
dy
At the plate
= ( 0.532 N # s>m2 ) 310 - 0.5(4 mm)4 s-1 = 4.256 Pa

du
tp = m
dy
. We or
m W ina g
3 (4.256) N>m2 4 3 5000 ( 10-6 ) m2 4
b)
ed e n
P = tpA =
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
= 21.3 mN Ans.
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
40
1–41. The velocity profile of a Newtonian fluid flowing over U

p
a fixed surface is approximated by u = U sin a yb.
2h
h u
Determine the shear stress in the fluid at y = h and at
y
y = h>2. The viscosity of the fluid is m.
Solution
p
u = U sin a yb
2h
du p p
= U a b cos a yb
dy 2h 2h
At y = h,
. We or
du p p
t = m = mU a b cos (h)
m W ina g
b)
ed e n
in
no W iss ea s
dy 2h 2h
itt id tio
is e D t w
t p or em ch
d th g. in t la
t = 0; Ans.
an on in rs h
k g rn to rig
At y = h>2, or in a uc y
w d le tr p
er ld
e lu nt ns co
du p p h
t = m = mU a b cos a b
th inc de f i es
dy 2h 2h 2
of rk ( stu e o tat
0.354pmU
ity o g us d S
t = Ans.
h
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
At y = h, t = 0;
0.354pmU
At y = h>2, t =
h
41
1–42. If a force of P = 2 N causes the 30-mm-diameter 50 mm

shaft to slide along the lubricated bearing with a constant
speed of 0.5 m > s, determine the viscosity of the lubricant
and the constant speed of the shaft when P = 8 N. Assume 0.5 m/s
the lubricant is a Newtonian fluid and the velocity profile P
between the shaft and the bearing is linear. The gap between
the bearing and the shaft is 1 mm.
Solution
Since the velocity distribution is linear, the velocity gradient will be constant.
du
t = m
dy
2N 0.5 m>s
= ma b
32p(0.015 m)4(0.05 m) 0.001 m
m = 0.8498 N # s>m2 Ans.
Thus,
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
= ( 0.8488 N # s>m2 ) a
8N
is e D t w
v
t p or em ch
b
d th g. in t la
32p(0.015 m)4(0.05 m) 0.001 m
an on in rs h
k g rn to rig
v = 2.00 m>s Ans.
or in a uc y
w d le tr p
er ld
e lu nt ns co
Also, by proportion,
th inc de f i es
2N 0.5 m>s
of rk ( stu e o tat
a b ma b
ity o g us d S
A t
=
te is ss th ite
8N v
a b ma b
in f th se for Un
A t
gr w in e
th t o a ly by
4
v = m>s = 2.00 m>s Ans.
y ar d le d
ro p an o te
2
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
m = 0.849 N # s>m2
v = 2.00 m>s
42
1–43. The 0.15-m-wide plate passes between two layers, A 6 mm

A and B, of oil that has a viscosity of m = 0.04 N # s>m2.
P
Determine the force P required to move the plate at a
constant speed of 6 mm > s. Neglect any friction at the end B 4 mm
supports, and assume the velocity profile through each
layer is linear. 0.20 m
Solution FA
The oil is a Newtonian fluid. P
Considering the force equilibrium along the x axis, Fig. a, FB

(a)
+
S ΣFx = 0; P - FA - FB = 0
P = FA + FB
6 mm>s
= ( 0.04 N # s>m2 ) a
du
tA = m b = 0.04 Pa
. We or
dy 6 mm
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
6 mm>s
= ( 0.04 N # s>m2 ) a
t p or em ch
du
d th g. in t la
tB = m b = 0.06 Pa
dy 4 mm
an on in rs h
k g rn to rig
P = ( 0.04 N>m2 ) (0.2 m)(0.15 m) + ( 0.06 N>m2 ) (0.2 m)(0.15 m)
or in a uc y
w d le tr p
er ld
e lu nt ns co
= 3.00 mN Ans.
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
3.00 mN
43
*1–44. The 0.15-m-wide plate passes between two layers A A 6 mm

and B of different oils, having viscosities of mA = 0.03 N # s>m2
and mB = 0.01 N # s>m2. Determine the force P required to
P
move the plate at a constant speed of 6 mm > s. Neglect any B 4 mm
friction at the end supports, and assume the velocity profile
through each layer is linear. 0.20 m
Solution FA
The oil is a Newtonian fluid. P
Considering the force equilibrium along the x axis, Fig. a, FB

(a)
ΣFx = 0; P - FA - FB = 0
P = FA + FB
6 mm>s
= ( 0.03 N # s>m2 ) a
du
b = 0.03 Pa
. We or
tA = m
dy 6 mm
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
6 mm>s
= ( 0.01 N # s>m2 ) a
du
d th g. in t la
tB = m b = 0.015 Pa
dy 4 mm
an on in rs h
k g rn to rig
P = ( 0.03 N>m2 ) (0.2 m)(0.15 m) + ( 0.015 N>m2 ) (0.2 m)(0.15 m)
or in a uc y
w d le tr p
er ld
e lu nt ns co
= 1.35 mN Ans.
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
44
1–45. The tank containing gasoline has a long crack on

its side that has an average opening of 10 mm. The velocity
through the crack is approximated by the equation 10 m
u = 10 ( 109 ) 310(10-6y - y2) 4 m>s, where y is in meters,
measured upward from the bottom of the crack. Find the
shear stress at the bottom, at y = 0 and the location y
within the crack where the shear stress in the gasoline is
zero. Take mg = 0.317(10-3) N # s>m2.
Solution y(m)
Gasoline is a Newtonian fluid. 10(10–6) u 10(109)[10(10–6)y – y2] m s
The rate of change of shear strain as a function of y is

du
= 10 ( 109 ) 3 10 ( 10-6 ) - 2y 4 s-1
dy
At the surface of crack, y = 0 and y = 10 ( 10-6 ) m. Then
du
` = 10 ( 109 ) 3 10 ( 10-6 ) - 2(0) 4 = 100 ( 103 ) s-1
. We or
dy y = 0
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
u(m s)
t p or em ch
or
d th g. in t la
(a)
an on in rs h
du
k g rn to rig
` = 10 ( 109 ) 5 10 ( 10-6 ) - 2 3 10 ( 10-6 ) 46 = -100 ( 103 ) s-1
or in a uc y
dy y = 10 (10-6) m
w d le tr p
er ld
e lu nt ns co
Applying Newton’s law of viscosity,

th inc de f i es
of rk ( stu e o tat
3 0.317 ( 10-3 ) N # s>m2 4 3 100 ( 103 ) s-1 4

du
ity o g us d S
ty = 0 = mg ` = = 31.7 N>m2 Ans.

dy y = 0
te is ss th ite
in f th se for Un
du
gr w in e
t = 0 when = 0. Thus
th t o a ly by
dy
y ar d le d
ro p an o te
du
st ny s d s ec
= 10 ( 109 ) 3 10 ( 10-6 ) - 2y 4 = 0
de f a rse de ot
dy
s
ill o u vi pr
10 ( 10-6 ) - 2y = 0
w le co ro is
sa eir is p rk
y = 5 ( 10-6 ) m = 5 mm Ans.
th d wo
an his
e
T
Ans:
ty = 0 = 31.7 N>m2
t = 0 when y = 5 µm
45
1–46. The tank containing gasoline has a long crack on its

side that has an average opening of 10 mm. If the velocity
profile through the crack is approximated by the equation 10 m
u = 10(109) 310(10-6y - y2) 4 m>s, where y is in meters,
plot both the velocity profile and the shear stress distribution
for the gasoline as it flows through the crack. Take
mg = 0.317(10-3) N # s>m2.
Solution
y ( 10-6 m ) 0 1.25 2.50 3.75 5.00
u(m>s) 0 0.1094 0.1875 0.2344 0.250
6.25 7.50 8.75 10.0
0.2344 0.1875 0.1094 0
y(10–6 m) y(10–6 m)
10.0 10.0
. We or
m W ina g
b)
ed e n
7.50 7.50
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
5.00 5.00
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
2.50 2.50
th inc de f i es
of rk ( stu e o tat
u(m s) τ(Ν m2)

0
ity o g us d S
0.10 0.20 0.30 –40 –30 –20 –10 0 10 20 30 40

te is ss th ite
(a) (b)
in f th se for Un
Gasoline is a Newtonian fluid. The rate of change of shear strain as a function of y is

gr w in e
th t o a ly by
du
y ar d le d
= 10 ( 109 ) 3 10 ( 10-6 ) - 2y 4 s-1

ro p an o te
st ny s d s ec
dy
de f a rse de ot
s
ill o u vi pr
Applying Newton’s law of viscoscity,

w le co ro is
sa eir is p rk
3 0.317 ( 10-3 ) N # s>m2 4 5 10 ( 109 ) 3 10 ( 10-6 )

du
- 2y 4 s-1 6
th d wo
t = m =
dy
an his
t = 3.17 ( 106 ) 3 10 ( 10-6 ) - 2y 4 N>m2

T
The plots of the velocity profile and the shear stress distribution are shown in Fig. a
and b respectively.
y ( 10-6 m ) 0 1.25 2.50 3.75 5.00

t ( N>m2 ) 31.70 23.78 15.85 7.925 0
6.25 7.50 8.75 10.0
- 7.925 - 15.85 - 23.78 - 31.70
y(10–6 m)
10.0
7.50
5.00
2.50
u(m s) τ(Ν m2)

0.20 0.30 –40 –30 –20 –10 0 10 20 30 40 Ans:
y = 1.25 ( 10 - 6 ) m, u = 0.109 m>s, t = 23.8 N>m2
(a) (b)
46
1–47. Water at A has a temperature of 15°C and flows y

along the top surface of the plate C. The velocity profile is
approximated as mA = 10 sin (2.5py) m>s, where y is in
meters. Below the plate the water at B has a temperature of
60°C and a velocity profile of u B = 4 ( 103 )( 0.1y - y2 ) , 100 mm A
where y is in meters. Determine the resultant force per unit
length of plate C the flow exerts on the plate due to viscous C
friction. The plate is 3 m wide.
100 mm B
Solution
Water is a Newtonian fluid.
Water at A, T = 15°C. From Appendix A m = 1.15 ( 10-3 ) N # s>m2. Here
du A 5p 5p 5p
= 10 a b cos a yb = a25p cos yb s-1
dy 2 2 2
At surface of plate C, y = 0. Then
du A 5p
` = 25p cos c (0) d = 25p s-1
. We or
dy y = 0 2
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
Applying Newton’s law of viscosity
d th g. in t la
an on in rs h
du A
3 1.15 ( 10-3 ) N # s>m2 4 ( 25p s-1 )
k g rn to rig
tA y = 0 = m ` = or in a uc y = 0.02875p N>m2
dy y = 0
w d le tr p
er ld
e lu nt ns co
Water at B, T = 60°C. From Appendix A m = 0.470 ( 10-3 ) N # s>m2. Here

th inc de f i es
of rk ( stu e o tat
du B
ity o g us d S
= 3 4 ( 103 ) (0.1 - 2y) 4 s-1

dy
te is ss th ite
in f th se for Un
At the surface of plate C, y = 0.1 m. Then

gr w in e
th t o a ly by
du B
y ar d le d
= 4 ( 103 ) 30.1 - 2(0.1) 4 = -400 s-1

ro p an o te
`
dy y = 0.1 m
st ny s d s ec
de f a rse de ot
s
ill o u vi pr

w le co ro is
du B
3 0.470 ( 10-3 ) N # s>m2 4 (400 s-1)
sa eir is p rk
tB y = 0.1 m = m ` = = 0.188 N>m2

th d wo
dy y = 0.1 m
an his
e
T
Here, the area per unit length of plate is A = 3 m. Thus
F = ( tA + tB ) A = ( 0.02875p N>m2 + 0.188 N>m2 ) (3 m)

= 0.835 N>m Ans.
Ans:
0.835 N>m
47
*1–48. Determine the constants B and C in Andrade’s

equation for water if it has been experimentally determined
that m = 1.00 ( 10-3 ) N # s>m2 at a temperature of 20°C and
that m = 0.554 ( 10-3 ) N # s>m2 at 50°C.
Solution
The Andrade’s equation is
m = Be C>T
At T = (20 + 273) K = 293 K, m = 1.00 ( 10-3 ) N # s>m2. Thus
1.00 ( 10-3 ) N # s>m2 = Be C>293 K

ln 3 1.00 ( 10-3 ) 4 = ln ( Be C>293 )
- 6.9078 = ln B + ln e C>293
. We or
- 6.9078 = ln B + C>293
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
ln B = - 6.9078 - C>293 (1)
t p or em ch
d th g. in t la
At T = (50 + 273) K = 323 K,, m = 0.554 ( 10 ) N # s>m . Thus,
an on in rs h
-3 2
0.554 ( 10-3 ) N # s>m2 = Be C>323 k g rn to rig

or in a uc y
w d le tr p
er ld
e lu nt ns co
ln 3 0.554 ( 10-3 ) 4 = ln ( Be C>323 )

th inc de f i es
of rk ( stu e o tat
- 7.4983 = ln B + ln e C>323
ity o g us d S
C
te is ss th ite
- 7.4983 = ln B +
323
in f th se for Un
gr w in e
C
th t o a ly by
ln B = - 7.4983 - (2)
323
y ar d le d
ro p an o te
st ny s d s ec
Equating Eqs. (1) and (2)

de f a rse de ot
s
ill o u vi pr
C C
-6.9078 - = - 7.4983 -
w le co ro is
293 323
sa eir is p rk
th d wo
0.5906 = 0.31699 ( 10-3 ) C

an his
C = 1863.10 = 1863 K Ans.

T
Substitute this result into Eq. (1)
B = 1.7316 ( 10-6 ) N # s>m2

= 1.73 ( 10-6 ) N # s>m2 Ans.
48
1–49. The viscosity of water can be determined using

the empirical Andrade’s equation with the constants
B = 1.732 ( 10-6 ) N # s>m2 and C = 1863 K. With these
constants, compare the results of using this equation with
those tabulated in Appendix A for temperatures of T = 10°C
and T = 80°C.
Solution
The Andrade’s equation for water is
m = 1.732 ( 10-6 ) e 1863>T
At T = (10 + 273) K = 283 K,
m = 1.732 ( 10-6 ) e 1863 K>283 K = 1.25 ( 10-3 ) N # s>m2 Ans.
From the Appendix at T = 10°C,
m = 1.31 ( 10-3 ) N # s>m2
. We or
m W ina g
b)
ed e n
in
no W iss ea s
At T = (80 + 273) K = 353 K,
itt id tio
is e D t w
t p or em ch
d th g. in t la
m = 1.732 ( 10-6 ) e 1863 K>353 K = 0.339 ( 10-3 ) N # s>m2 Ans.
an on in rs h
k g rn to rig
From the Appendix at T = 80°C, or in a uc y
w d le tr p
er ld
e lu nt ns co
m = 0.356 ( 10-3 ) N # s>m2

th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
At T = 283 K, m = 1.25 (10 - 3) N # s>m2
At T = 353 K, m = 0.339 (10 - 3) N # s>m2
49
1–50. Determine the constants B and C in the Sutherland

equation for air if it has been experimentally determined that
at standard atmospheric pressure and a temperature of 20°C,
m = 18.3 ( 10-6 ) N # s>m2, and at 50°C, m = 19.6 ( 10-6 ) N # s>m2.
Solution
The Sutherland equation is
BT 3>2
m =
T + C
At T = (20 + 273) K = 293 K, m = 18.3 ( 10-6 ) N # s>m2. Thus,
B ( 2933>2 )
18.3 ( 10-6 ) N # s>m2 =
293 K + C
. We or
B = 3.6489 ( 10-9 ) (293 + C) (1)
m W ina g
b)
ed e n
in
no W iss ea s
) N # s>m . Thus
itt id tio
is e D t w
At T = (50 + 273) K = 323 K, m = 19.6 ( 10 -6 2
t p or em ch
d th g. in t la
an on in rs h
B ( 3233>2 )
19.6 ( 10-6 ) N # s>m2 =
k g rn to rig
323 K + C or in a uc y
w d le tr p
er ld
e lu nt ns co
B = 3.3764 ( 10-9 ) (323 + C) (2)

th inc de f i es
of rk ( stu e o tat
Solving Eqs. (1) and (2) yields

ity o g us d S
B = 1.36 ( 10-6 ) N # s> ( m2 K2 ) C = 78.8 K

1
Ans.
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
B = 1.36 ( 10 - 6 ) N # s> ( m2 # K 2 2 , C = 78.8 K
1
50
1–51. The constants B = 1.357 ( 10-6 ) N # s> ( m2 # K1>2 ) and

C = 78.84 K have been used in the empirical Sutherland
equation to determine the viscosity of air at standard
atmospheric pressure. With these constants, compare the
results of using this equation with those tabulated in
Appendix A for temperatures of T = 10°C and T = 80°C.
Solution
The Sutherland Equation for air at standard atmospheric pressure is
1.357 ( 10-6 ) T 3>2
m =
T + 78.84
At T = (10 + 273) K = 283 K,
1.357 ( 10-6 )( 2833>2 )

m = = 17.9 ( 10-6 ) N # s>m2 Ans.
283 + 78.84
. We or
From Appendix A at T = 10°C,
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
m = 17.6 ( 10-6 ) N # s>m2
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
At T = (80 + 273) K = 353 K,
or in a uc y
w d le tr p
er ld
1.357 ( 10-6 )( 3533>2 )
e lu nt ns co
m = = 20.8 ( 10-6 ) N # s>m2 Ans.

th inc de f i es
353 + 78.84
of rk ( stu e o tat
ity o g us d S
From Appendix A at T = 80°C,
m = 20.9 ( 10-6 ) N # s>m2

te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
Using the Sutherland equation,
at T = 283 K, m = 17.9 (10-6) N # s>m2
at T = 353 K, m = 20.8 ( 10-6 ) N # s>m2
51
*1–52. The read–write head for a hand-held music player

has a surface area of 0.04 mm2. The head is held 0.04 µm
above the disk, which is rotating at a constant rate of
1800 rpm. Determine the torque T that must be applied to 8 mm
the disk to overcome the frictional shear resistance of the air
between the head and the disk. The surrounding air is at
standard atmospheric pressure and a temperature of 20°C. T
Assume the velocity profile is linear.
Solution
Here Air is a Newtonian fluid.
rev 2p rad 1 min

v = a1800 ba ba b = 60p rad>s.
min 1 rev 60 s
Thus, the velocity of the air on the disk is U = vr = (60p)(0.008) = 0.48p m>s.
Since the velocity profile is assumed to be linear as shown in Fig. a,
du U 0.48p m>s
= = = 12 ( 106 ) p s-1
. We or
dy t 0.04 ( 10-6 ) m
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
For air at T = 20°C and standard atmospheric pressure, m = 18.1 ( 10-6 ) N # s>m2
is e D t w
t p or em ch
d th g. in t la
(Appendix A). Applying Newton’s law of viscosity,
an on in rs h
k g rn to rig
or in a uc y
3 18.1 ( 10-6 ) N # s>m2 4 3 12 ( 106 ) p s-1 4
du
w d le tr p
er ld
t = m = = 217.2p N>m2
e lu nt ns co
dy
th inc de f i es
of rk ( stu e o tat
Then, the drag force produced is

ity o g us d S
0.04 2
te is ss th ite
FD = tA = ( 217.2p N>m2 ) a m b = 8.688 ( 10-6 ) p N

10002
in f th se for Un
gr w in e
th t o a ly by
The moment equilibrium about point O requires

y ar d le d
ro p an o te
a+ ΣMO = 0; T - 3 8.688 ( 10-6 ) p N 4 (0.008 m) = 0

st ny s d s ec
T = 0.218 ( 10-6 ) N # m
de f a rse de ot

s
ill o u vi pr
= 0.218 mN # m Ans.
w le co ro is
sa eir is p rk

th d wo
an his
e
T
u 0.008 m
t = 0.04(10–6) m
0
U 0.48 m/s
T
y FD 8.688(10–6) N
(b)
(a)
52
1–53. Disks A and B rotate at a constant rate of 100 mm

vA = 50 rad>s and vB = 20 rad>s respectively. Determine
the torque T required to sustain the motion of disk B. The gap,
t = 0.1 mm, contains SAE 10 oil for which m = 0.02 N # s>m2. vA
Assume the velocity profile is linear.
A
Solution vB 20 rad/s
Oil is a Newtonian fluid.
T
The velocities of the oil on the surfaces of disks A and B are UA = vAr = (50r) m>s
and UB = vBr = (20r) m>s . Since the velocity profile is assumed to be linear as y
shown in Fig. a,
du UA - UB 50r - 20r UA 50r

= = = 300 ( 103 ) r s-1
dy t 0.1 ( 10-3 ) m
Applying Newton’s Law of viscosity,
. We or
t = 0.1(10–3) m
m W ina g
b)
ed e n
= ( 0.02 N # s>m2 ) 3 300 ( 103 ) r 4 = (6000r) N>m2
du
in
no W iss ea s
itt id tio
is e D t w
t = m
t p or em ch
dy
d th g. in t la
u
an on in rs h
k g rn to rig
The shaded differential element shown in Fig. b has an area of dA = 2pr dr. Thus,
dF = tdA = (6000r)(2pr dr) = 12 ( 103 ) pr 2 dr. Moment equilibrium about point O
or in a uc y UB 20r
w d le tr p
er ld
e lu nt ns co
in Fig. b requires (a)

th inc de f i es
L
of rk ( stu e o tat
a+ ΣMO = 0; T - r dF = 0
ity o g us d S
0.1 m
te is ss th ite
0.1 m
L0
in f th se for Un
T - r 3 12 ( 103 ) pr 2 dr 4 = 0
gr w in e
r
th t o a ly by
y ar d le d
0.1 m
L0
ro p an o te
T = 12 ( 103 ) pr 3 dr 0
st ny s d s ec
dr
de f a rse de ot
T
s
ill o u vi pr
r 4 0.1 m
= 12 ( 103 ) p a dF
w le co ro is
b` dA
4 0
sa eir is p rk
= 0.942 N # m
th d wo
Ans.
an his
(b)
T
Ans:
0.942 N # m
53
1–54. If disk A is stationary, vA = 0 and disk B rotates at 100 mm

vB = 20 rad>s, determine the torque T required to sustain
the motion. Plot your results of torque (vertical axis) versus
the gap thickness for 0 … t … 0.1 m. The gap contains vA
SAE10 oil for which m = 0.02 N # s>m2. Assume the velocity
profile is linear. A
Solution vB 20 rad/s
T
t ( 10-3 ) m 0 0.02 0.04 0.06 0.08 0.10
T(N # m) ∞ 3.14 1.57 1.05 0.785 0.628
T(N.m) y 0.1 m
3.5
3.0
. We or
2.5
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t
t p or em ch
2.0
d th g. in t la
an on in rs h
1.5
k g rn to rig
u T
1.0 or in a uc y
w d le tr p
er ld
e lu nt ns co
0.5 UB 20r
th inc de f i es
(a)
of rk ( stu e o tat
0 t(10–3m)
0.02 0.04 0.06 0.08 0.10
ity o g us d S
(C)
te is ss th ite
in f th se for Un
y of disks A and B are

gr w in e
Oil is a Newtonian fluid. The velocities of the oil on the surfaces 0.1 m
th t o a ly by
UA = vAr = 0 and UB = vBr = (20r) m>s. Since the velocity profile is assumed to
y ar d le d
ro p an o te
be linear as shown in Fig. a,

st ny s d s ec
r
de f a rse de ot
du UA - UB 0 - 20r 20r -1
s
ill o u vi pr
= = = a- bs
dy t t t 0
w le co ro is
dr
sa eir is p rk
t
th d wo

dF dA
an his
T
` = ( 0.02 N # s>m2 ) a
du 20r 0.4r u
T
t = m` b = a b N>m2
dy t t
UB 20r
(a) (b)
54
1–54. (continued)
The shaded differential element shown in Fig. b has an area of dA = 2pr dr. Thus,
0.4r 0.8p 2
dF = tdA = a b(2pr dr) = a br dr. Moment equilibrium about point O
t t
in Fig. b requires
L
a+ ΣMO = 0; T - r dF = 0
0.1 m
L0
0.8p 2
T - r ca br dr d = 0
t
0.1 m
L0
0.8p 3
. We or
T = a br dr
m W ina g
b)
ed e n
t
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
0.8p r 4 0.1 m
T = a ba b `
an on in rs h
k g rn to rig
t 4 0
or in a uc y
w d le tr p
20 ( 10-6 ) p
er ld
d N#m
e lu nt ns co
T = c where t is in m Ans.
t
th inc de f i es
of rk ( stu e o tat
The plot of T vs t is shown Fig. c.

ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
20 ( 10-6 ) p
T = c d N # m, where t is in m
t
55
1–55. The tape is 10 mm wide and is drawn through an

applicator, which applies a liquid coating (Newtonian fluid)
that has a viscosity of m = 0.830 N # s>m2 to each side of the
tape. If the gap between each side of the tape and the
applicator’s surface is 0.8 mm, determine the torque T at
the instant r = 150 mm that is needed to rotate the wheel at
0.5 rad>s. Assume the velocity profile within the liquid is 30 mm
linear.
0.5 rad/s
T
r 150 mm
Solution
P = 2F = 2(0.02334 N)
Considering the moment equilibrium of the wheel, Fig. a,
. We or
W
ΣMA = 0; T - P(0.15 m) = 0
m W ina g
b)
ed e n
0.15 m
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
T
an on in rs h
k g rn to rig
du
P = t(2A) = m(2A) or in a uc y
dy
w d le tr p
er ld
e lu nt ns co
0x
0.5 rad>s(0.15 m)
P = ( 0.830 N # s>m ) (2)(0.03 m)(0.01 m) a
th inc de f i es
2
b
of rk ( stu e o tat
0.0008 m
ity o g us d S
P = 0.04669 N
te is ss th ite
in f th se for Un
Thus
0y
gr w in e
= 7.00 mN # m
th t o a ly by
T = (0.04669 N)(0.15 m) Ans. (a)

y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
7.00 mN # m
56
*1–56. The very thin tube A of mean radius r and length L T A

is placed within the fixed circular cavity as shown. If the t t
cavity has a small gap of thickness t on each side of the tube, r
and is filled with a Newtonian liquid having a viscosity m,
determine the torque T required to overcome the fluid
resistance and rotate the tube with a constant angular velocity
of v. Assume the velocity profile within the liquid is linear. L
Solution
Since the velocity distribution is assumed to be linear, the velocity gradient will be
constant.
du
t = m
dy
(vr) 2 µ r 2L
= m F=
t t
. We or
m W ina g
b)
ed e n
in
no W iss ea s
T
itt id tio
is e D t w
Considering the moment equilibrium of the tube, Fig. a,
t p or em ch
d th g. in t la
ΣM = 0; T - 2tAr = 0
an on in rs h
k g rn to rig
O
(vr) or in a uc y
w d le tr p
er ld
T = 2(m) (2prL)r r
e lu nt ns co
t
th inc de f i es
4pmvr 3L
of rk ( stu e o tat
T = Ans. (a)
ity o g us d S
t
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
57
1–57. The shaft rests on a 2-mm-thin film of oil having a v 2 rad/s

viscosity of m = 0.0657 N # s>m2. If the shaft is rotating at a
constant angular velocity of v = 2 rad>s, determine the shear
stress in the oil at r = 50 mm and r = 100 mm. Assume the
velocity profile within the oil is linear. T
100 mm
Solution
Oil is a Newtonian fluid. Since the velocity distribution is linear, the velocity gradient
will be constant.
At r = 50 mm,
du
t = m
dy
(2 rad>s)(50 mm)
t = ( 0.0657 N # s>m2 ) a b
. We or
2 mm
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
t = 3.28 Pa Ans.
is e D t w
t p or em ch
d th g. in t la
At r = 100 mm,
an on in rs h
k g rn to rig
or in a uc y
(2 rad>s)(100 mm)
t = ( 0.0657 N # s>m2 ) a
w d le tr p
er ld
e lu nt ns co
b
2 mm
th inc de f i es
t = 6.57 Pa Ans.
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
At r = 50 mm, t = 3.28 Pa
At r = 100 mm, t = 6.57 Pa
58
1–58. The shaft rests on a 2-mm-thin film of oil having v 2 rad/s

a viscosity of m = 0.0657 N # s>m2. If the shaft is rotating at
a constant angular velocity of v = 2 rad>s, determine the
torque T that must be applied to the shaft to maintain the
motion. Assume the velocity profile within the oil is linear. T
100 mm
Solution
Oil is a Newtonian fluid. Since the velocity distribution is linear, the velocity gradient
will be constant. The velocity of the oil in contact with the shaft at an arbitrary point
is U = vr. Thus, dF
du mvr
t = m =
dy t dr
r
Thus, the shear force the oil exerts on the differential element of area dA = 2pr dr T
shown shaded in Fig. a is O
. We or
2pmv 2
m W ina g
mvr
b)
ed e n
in
dF = tdA = a b(2pr dr) =
no W iss ea s
r dr
itt id tio
is e D t w
t t
t p or em ch
d th g. in t la
an on in rs h
Considering the moment equilibrium of the shaft, Fig. a,
k g rn to rig
(a)
or in a uc y
w d le tr p
er ld
Lr
e lu nt ns co
a+ ΣMO = 0; dF - T = 0
th inc de f i es
of rk ( stu e o tat
2pmv R 3
Lr t L0
ity o g us d S
T = dF = r dr
te is ss th ite
in f th se for Un
2pmv r 4 R pmvR4
gr w in e
= a b` =
th t o a ly by
t 4 0 2t
y ar d le d
ro p an o te
Substituting,
st ny s d s ec
N#s
de f a rse de ot
s
ill o u vi pr
p a0.0657 b(2 rad>s)(0.1 m)4

m2
= 10.32 ( 10-3 ) N # m = 10.3 mN # m
w le co ro is
T = Ans.
sa eir is p rk
2(0.002 m)
th d wo
an his
e
T
Ans:
10.3 mN # m
59
1–59. The conical bearing is placed in a lubricating

Newtonian fluid having a viscosity m. Determine the torque v
T required to rotate the bearing with a constant angular
velocity of v. Assume the velocity profile along the thickness
t of the fluid is linear.
T
Solution u t
Since the velocity distribution is linear, the velocity gradient will be constant. The
velocity of the oil in contact with the shaft at an arbitrary point is U = vr. Thus,
du mvr
t = m =
dy t
From the geometry shown in Fig. a,
r dr T R
z = dz = (1)
tan u tan u
. We or
ds
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
Also, from the geometry shown in Fig. b,
is e D t w
t p or em ch
r dz
d th g. in t la
dz = ds cos u (2)
an on in rs h
k g rn to rig
or in a uc y dF
Equating Eqs. (1) and (2),
w d le tr p
er ld
e lu nt ns co
φ z
dr dr
th inc de f i es
= ds cos u ds =
of rk ( stu e o tat
tan u sin u (a)

ity o g us d S
The area of the surface of the differential element shown shaded in Fig. a is
te is ss th ite
2p
in f th se for Un
dA = 2prds = rdr. Thus, the shear force the oil exerts on this area is θ
gr w in e
sin u
th t o a ly by
dz
ds
y ar d le d
mvr 2p 2pmv 2
ro p an o te
dF = tdA = a ba rdr b = r dr
st ny s d s ec
t sin u t sin u (b)

de f a rse de ot
s
ill o u vi pr
Considering the moment equilibrium of the shaft, Fig. a,

w le co ro is
L
sa eir is p rk
ΣMz = 0; T - rdF = 0

th d wo
an his
2pmv R 3
L t sin u L0
T
T = rdF = r dr
2pmv r 4 R
= a b`
t sin u 4 0
pmvR4
= Ans.
2t sin u
Ans:
pmvR4
T =
2t sin u
60
*1–60. The city of Denver, Colorado, is at an elevation of

1610 m above sea level. Determine how hot one can prepare
water to make a cup of coffee.
Solution
At the elevation of 1610 meters, the atmospheric pressure can be obtained by
interpolating the data given in Appendix A.
89.88 kPa - 79.50 kPa

patm = 89.88 kPa - a b(610 m) = 83.55 kPa
1000 m
Since water boils if the vapor pressure is equal to the atmospheric pressure, then the
boiling temperature at Denver can be obtained by interpolating the data given in
Appendix A.
. We or
83.55 - 70.1
m W ina g
b)
ed e n
in
no W iss ea s
Tboil = 90°C + a b(5°C) = 94.6°C Ans.
itt id tio
is e D t w
84.6 - 70.1
t p or em ch
d th g. in t la
an on in rs h
Note: Compare this with Tboil = 100°C at 1 atm.
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
61
1–61. How hot can you make a cup of tea if you climb to
the top of Mt. Everest (29,000 ft) and attempt to boil water?
Solution
At the elevation of 29 000 ft, the atmospheric pressure can be obtained by
interpolating the data given in Appendix A
704.4 lb>ft 2 - 629.6 lb>ft 2

patm = 704.4 lb>ft 2 - a b(29 000 ft - 27 500 ft)
30 000 lb>ft 2 - 27 500 lb>ft 2
lb 1 ft 2
= a659.52 ba b = 4.58 psi
ft 2 12 in
. We or
Since water boils if the vapor pressure equals the atmospheric pressure, the boiling
m W ina g
b)
ed e n
in
temperature of the water at Mt. Everest can be obtained by interpolating the data
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
of Appendix A
an on in rs h
k g rn to rig
4.58 psi - 3.72 psi
Tboil = 150°F + a b(160 - 150)°F = 158°F
or in a uc y Ans.
4.75 psi - 3.72 psi
w d le tr p
er ld
e lu nt ns co
th inc de f i es
Note: Compare this with 212°F at 1 atm.

of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
patm = 4.58 psi, Tboil = 158 °F
62
1–62. The blades of a turbine are rotating in water that has

a temperature of 30°C. What is the lowest water pressure
that can be developed at the blades so that cavitation will
not occur?
Solution
From Appendix A, the vapor pressure of water at T = 30°C is
py = 4.25 kPa
Cavitation (boiling of water) will occur if the water pressure is equal or less than
py. Thus
pmin = py = 4.25 kPa Ans.
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
4.25 kPa
63
1–63. As water at 40°C flows through the transition, its

pressure will begin to decrease. Determine the lowest
pressure it can have without causing cavitation.
Solution
py = 7.38 kPa
Cavitation (or boiling of water) will occur when the water pressure is equal to or
less than py. Thus,
p min = 7.38 kPa Ans.
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
7.38 kPa
64
*1–64. Water at 70°F is flowing through a garden hose. If

the hose is bent, a hissing noise can be heard. Here cavitation
has occurred in the hose because the velocity of the flow has
increased at the bend, and the pressure has dropped. What
would be the highest absolute pressure in the hose at this
location in the hose?
Solution
From Appendix A, the vapor pressure of water at T = 70°F is
py = 0.363 lb>in2
Cavitation (boiling of water) will occur if the water pressure is equal or less than py.
pmax = py = 0.363 lb>in2 Ans.
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
65
1–65. Water at 25°C is flowing through a garden hose. If

the hose is bent, a hissing noise can be heard. Here cavitation
has occurred in the hose because the velocity of the flow has
increased at the bend, and the pressure has dropped. What
would be the highest absolute pressure in the hose at this
location in the hose?
Solution
py = 3.17 kPa
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
Cavitation (boiling of water) will occur if the water pressure is equal or less than py.
an on in rs h
k g rn to rig Ans.
pmax = py = 3.17 kPa or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
3.17 kPa
66
1–66. A stream of water has a diameter of 0.4 in. when it

begins to fall out of the tube. Determine the difference in
pressure between a point located just inside and a point just
outside of the stream due to the effect of surface tension.
Take s = 0.005 lb>ft.
Solution
Consider a length L of the water column. The free-body diagram of half of this
column is shown in Fig. a. 0.4 in.
ΣF = 0
2(s)(L) + po(d)(L) - pi(d)(L) = 0
2s = ( pi - po ) d
2s
pi - po =
d
. We or
2(0.005 lb>ft)
m W ina g
b)
ed e n
= 0.300 lb>ft 2 = 2.08 ( 10-3 ) psi
in
no W iss ea s
∆p = Ans.
itt id tio
is e D t w
t p or em ch
(0.4 in.>12) ft
d th g. in t la
an on in rs h
k g rn to rig
z
or in a uc y
w d le tr p
er ld
e lu nt ns co
Po
th inc de f i es
d
of rk ( stu e o tat
y
ity o g us d S
x
te is ss th ite
Pi
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
L
sa eir is p rk
th d wo
an his

T
(a)
Ans:
2.08 ( 10 - 3 ) psi
67
1–67. Steel particles are ejected from a grinder and

fall gently into a tank of water. Determine the largest
average diameter of a particle that will float on the water
with a contact angle of u = 180°, if the temperature is 80°F.
Take gst = 490 lb>ft 3 and s = 0.00492 lb>ft. Assume that
4
each particle has the shape of a sphere where V = pr 2.
3
Solution W
The weight of a steel particle is
4 d 3 245p 3
W = gstV = ( 490 lb>ft 3 ) c p a b d = d d
r =2
3 2 3
(a)
Force equilibrium along the vertical, Fig. a, requires
d 245p 3
+ c ΣFy = 0; (0.00492 lb>ft) c 2p a b d - d = 0
2 3
. We or
245p 3
m W ina g
0.00492pd = d
b)
ed e n
in
no W iss ea s
itt id tio
3
is e D t w
t p or em ch
d th g. in t la
d = 7.762 ( 10-3 ) ft
an on in rs h
k g rn to rig
= 0.0931 in.
or in a uc y
w d le tr p Ans.
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
0.0931 in.
68
*1–68. When a can of soda water is opened, small gas

bubbles are produced within it. Determine the difference in
pressure between the inside and outside of a bubble having
a diameter of 0.02 in. The surrounding temperature is 60°F.
Take s = 0.00503 lb>ft.
Solution = 0.00503 lb ft
0.01 in
The FBD of a half a bubble shown in Fig. a will be considered. Here A is the
projected area. Force equilibrium along the horizontal requires
Fout = poutA
Fin = pinA
+ 0.02
S ΣFx = 0; pout A + (0.00503 lb>ft) c p a 12 ft b d - pinA = 0
2
p 0.02
( pin - pout ) c a ft b d = 8.3833 ( 10-6 ) p lb
4 12 (a)
1 ft 2
pin - pout = ( 12.072 lb>ft ) a
2
b
. We or
144 in2
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
Ans.
is e D t w
= 0.0838 psi
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
69
1–69. Determine the distance h that a column of mercury D

in the tube will be depressed when the tube is inserted into
the mercury at a room temperature of 68°F. Set D = 0.12 in.
Solution 50
Using the result
2s cos u
h =
rgr
lb
From the table in Appendix A, for mercury r = 26.3 slug>ft 3 and s = 31.9 ( 10-3 ) .
ft
lb
2c 31.9 ( 10-3 ) d cos (180° - 50°)
ft
. We or
h =
m W ina g
b)
ed e n
slug ft 1 ft
in
no W iss ea s
itt id tio
is e D t w
a26.3 ba32.2 b c (0.06 in.)a bd
t p or em ch
d th g. in t la
3 2 12 in.
ft s
an on in rs h
12 in.
k g rn to rig
= 3 - 9.6852 ( 10-3 ) ft 4 a b
or in a uc y
1 ft
w d le tr p
er ld
e lu nt ns co
= - 0.116 in. Ans.

th inc de f i es
of rk ( stu e o tat
The negative sign indicates that a depression occurs.

ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
0.116 in.
70
1–70. Determine the distance h that the column of mercury D

in the tube will be depressed when the tube is inserted into the
mercury at a room temperature of 68°F. Plot this relationship
of h (vertical axis) versus D for 0.05 in. … D … 0.150 in. Give
values for increments of ∆D = 0.025 in. Discuss this result. h
Solution 50
d(in.) 0.05 0.075 0.100 0.125 0.150

h(in.) - 0.279 - 0.186 - 0.139 -0.112 0.0930
h(in.)
0.025 0.05 0.075 0.100 0.125 0.150

d(in.)
0
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
−0.1
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
−0.2
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
−0.3
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
From the table in Appendix A, for mercury at 68°F, r = 26.3 slug>ft 3, and
y ar d le d
ro p an o te
s = 31.9 ( 10-3 ) lb>ft. Using the result

st ny s d s ec
de f a rse de ot
s
ill o u vi pr
2s cos u
h =
w le co ro is
rgr
sa eir is p rk
th d wo
2 3 31.9 ( 10-3 ) lb>ft 4 cos (180° - 50°) 12 in

an his
h = £ §a b
( 26.3 slug>ft )( 32.2 ft>s ) 3(d>2)(1 ft>12 in)4
3 2 1 ft
T
- 0.01395
h = a b in. where d is in in.
d
The negative sign indicates that a depression occurs.
Ans:
d = 0.075 in., h = 0.186 in.
71
1–71. Water in the glass tube is at a temperature of 40°C.

Plot the height h of the water as a function of the tube’s inner D
diameter D for 0.5 mm … D … 3 mm. Use increments of
0.5 mm. Take s = 69.6 mN>m.
h
Solution
When water contacts the glass wall, u = 0°. The weight of the rising column of
water is
p 1
W = gwV = rwg a D2hb = prwgD2h σ σ
4 4
w
The vertical force equilibrium, Fig. a, requires
1
+ c ΣFy = 0; s(pD) - pr gD2h = 0
4 w
. We or
m W ina g
b)
ed e n
4s
in
no W iss ea s
h
itt id tio
h =
is e D t w
t p or em ch
rwgD
d th g. in t la
an on in rs h
From Appendix A, rw = 992.3 kg>m3 at T = 40°C . Then
k g rn to rig
or in a uc y
w d le tr p
er ld
4(0.0696 N>m) 28.6 ( 10-6 ) D
e lu nt ns co
h = = m
th inc de f i es
( 992.3 kg>m3 )( 9.81 m>s2 ) D D (a)

of rk ( stu e o tat
h(mm)
ity o g us d S
For 0.5 mm … D … 3 mm
te is ss th ite
60
in f th se for Un
D(mm) 0.5 1.0 1.5 2.0 2.5 3.0

gr w in e
50
th t o a ly by
h(mm) 57.2 28.6 19.07 14.3 11.44 9.53

y ar d le d
40
ro p an o te
st ny s d s ec
The plot of h vs D is shown in Fig. b. 30

de f a rse de ot
s
ill o u vi pr
w le co ro is
20
sa eir is p rk
th d wo
10
an his
0 D(mm)
T
0.5 1.0 1.5 2.0 2.5 3.0

(b)
Ans:
D = 1.0 mm, h = 28.6 mm
72
*1–72. Many camera phones now use liquid lenses as a

means of providing a quick auto-focus. These lenses work by 30
electrically controlling the internal pressure within a liquid
droplet, thereby affecting the angle of the meniscus of the
droplet, and so creating a variable focal length. To analyze 3 mm
this effect, consider, for example, a segment of a spherical
droplet that has a base diameter of 3 mm. The pressure in the
droplet is 105 Pa and is controlled through a tiny hole at
the center. If the tangent at the surface is 30°, determine the
surface tension at the surface that holds the droplet in place.
Solution
Writing the force equation of equilibrium along the vertical by referring to the FBD
of the droplet in Fig. a
r = 0.0015m
30º 30º
N
+ c ΣFz = 0; a105 2 b 3 p(0.0015 m)2 4 - (s sin 30°) 32p(0.0015 m) 4 = 0
m
s = 0.158 N>m Ans.
. We or
m W ina g
b)
ed e n
105 N m2
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
(a)
an on in rs h
k g rn to rig
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
73
1–73. The tube has an inner diameter d and is immersed in d

water at an angle u from the vertical. Determine the average
length L to which water will rise along the tube due to
L
capillary action. The surface tension of the water is s and its
density is r. u
Solution
The free-body diagram of the water column is shown in Fig. a. The weight of this
d 2 prgd 2L
column is W = rg V = rgc p a b L d = .
2 4 x

For water, its surface will be almost parallel to the surface of the tube
(contact angle ≈ 0°). Thus, s acts along the tube. Considering equilibrium along
the x axis, L
. We or
2
prgd L
m W ina g
b)
ΣFx = 0; s(pd) - sin u = 0
ed e n
in
no W iss ea s
itt id tio
4
is e D t w
t p or em ch
d th g. in t la
4s N
an on in rs h
L = Ans.
k g rn to rig
rgd sin u d
or in a uc y Pgd2L
w d le tr p
er ld
W=
e lu nt ns co
4
th inc de f i es
(a)
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
L = 4s>(rgd sin u)
74
1–74. The tube has an inner diameter of d = 2 mm and is d

immersed in water. Determine the average length L to which
the water will rise along the tube due to capillary action as a
L
function of the angle of tilt, u. Plot this relationship of L
(vertical axis) versus u for 10° … u … 30°. Give values for u
increments of ∆u = 5°. The surface tension of the water is
s = 75.4 mN>m, and its density is r = 1000 kg>m3.
Solution
u(deg.) 10 15 20 25 30 x
L(mm) 88.5 59.4 44.9 36.4 30.7
L(mm) = 0.0754 N m
L
100
80
. We or
θ
m W ina g
b)
ed e n
N
in
no W iss ea s
itt id tio
60
is e D t w
t p or em ch
d th g. in t la
0.002m W = [9.81(10–3) h] N
40
an on in rs h
k g rn to rig
20 or in a uc y (a)
w d le tr p
er ld
e lu nt ns co
th inc de f i es
0 5 10 15 20 25 30
of rk ( stu e o tat
ity o g us d S
The FBD of the water column is shown in Fig. a. The weight of this column is
te is ss th ite
in f th se for Un
p
W = rg V = ( 1000 kg>m3 )( 9.81 m>s2 ) c (0.002 m)L d = 3 9.81 ( 10-3 ) pL 4 N.
gr w in e
th t o a ly by
4
y ar d le d
ro p an o te
For water, its surface will be almost parallel to the surface of the tube (u ≅ 0°) at the
st ny s d s ec
point of contact. Thus, s acts along the tube. Considering equilibrium along x axis,
de f a rse de ot
s
ill o u vi pr
ΣFx = 0; (0.0754 N>m) 3 p(0.002 m) 4 - 3 9.81 ( 10-3 ) pL 4 sin u

w le co ro is
= 0
sa eir is p rk
0.0154
th d wo
L = a b m where u is in deg. Ans.

sin u
an his
e
T
The plot of L versus u is shown in Fig. a.
Ans:
L = (0.0154>sin u) m
75
1–75. The marine water strider, Halobates, has a mass of

0.36 g. If it has six slender legs, determine the minimum
contact length of all of its legs to support itself in water having
a temperature of T = 20°C. Take s = 72.7 mN>m, and
assume the legs are thin cylinders that are water repellent.
Solution
The force supported by the legs is
P = 3 0.36 ( 10-3 ) kg 4 3 9.81 m>s2 4 = 3.5316 ( 10-3 ) N
Here, s is most effective in supporting the weight if it acts vertically upward. This P = 3.5316(10 –3) N
requirement is indicated on the FBD of each leg in Fig. a. The force equilibrium
along vertical requires l l
+ c ΣFy = 0; 3.5316 ( 10-3 ) N - 2(0.0727 N>m)l = 0

l = 24.3 ( 10-3 ) m = 24.3 mm Ans.
. We or
m W ina g
b)
ed e n
in
no W iss ea s
Note: Because of surface microstructure, a water strider’s legs are highly hydrophobic.
itt id tio
is e D t w
t p or em ch
d th g. in t la
That is why the water surface curves downward with u ≈ 0°, instead of upward as it
an on in rs h
does when water meets glass.
k g rn to rig
(a)
or in a uc y
w d le tr p
er ld
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
24.3 mm
76
*1–76. The ring has a weight of 0.2 N and is suspended

P
on the surface of the water, for which s = 73.6 mN>m.
Determine the vertical force P needed to pull the ring
free from the surface. Note: This method is often used to
measure surface tension.
Solution 50 mm
The free-body diagram of the ring is shown in Fig. a. For water, its surface will be
almost parallel to the surface of the wire (u ≈ 0°) at the point of contact, Fig. a.
+ c ΣFy = 0; P - W - 2T = 0
P - 0.2 N - 2(0.0736 N>m) 32p(0.05 m) 4 = 0
P = 0.246 N Ans. P
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
an on in rs h
k g rn to rig
or in a uc y T = 7.36(10−2) N T = 7.36(10−2) N
w d le tr p
er ld
e lu nt ns co
W = 0.2 N
th inc de f i es
(a)
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
77
1–77. The ring has a weight of 0.2 N and is suspended on

P
the surface of the water. If it takes a force of P = 0.245 N to
lift the ring free from the surface, determine the surface
tension of the water.
Solution 50 mm
The free-body diagram of the ring is shown in Fig. a. For water, its surface will be
almost parallel to the surface of the wire (u ≈ 0°) at the point of contact, Fig. a.
+ c ΣFy = 0; 0.245 N - 0.2 N - 23s(2p(0.05 m)) 4 = 0

P = 0.245 N
s = 0.0716 N>m
= 0.0716 N>m Ans.
. We or
m W ina g
b)
ed e n
in
no W iss ea s
itt id tio
is e D t w
t p or em ch
d th g. in t la
T = 0.1 T = 0.1
an on in rs h
k g rn to rig
or in a uc y W = 0.2 N
w d le tr p
er ld
(a)
e lu nt ns co
th inc de f i es
of rk ( stu e o tat
ity o g us d S
te is ss th ite
in f th se for Un
gr w in e
th t o a ly by
y ar d le d
ro p an o te
st ny s d s ec
de f a rse de ot
s
ill o u vi pr
w le co ro is
sa eir is p rk
th d wo
an his
e
T
Ans:
0.0716 N>m
78

Tarea Fluidos Solucionario

Uploaded by

Copyright:

Available Formats

Tarea Fluidos Solucionario

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Tarea Fluidos Solucionario

Uploaded by

Copyright:

Available Formats

© 2014 Pearson Education, Inc., Upper Saddle River, NJ. All rights reserved.

This material is protected under all copyright laws as they currently

1–1. Represent each of the following quantities with combi­

c) N>ks2 = N>(103 s)2 = 10-6 N>s2 = mN>s2 Ans.

1–2. Evaluate each of the following to three signifi­

b) (67 300 ms) = 3 67.3 ( 10

c) 3 723 ( 106 ) 4 1>2 mm = 3 723 ( 106 ) 4 1>2 ( 10-3 ) m = 26.9 m Ans.

1–3. Evaluate each of the following to three signifi­

c) (4.78 mm)(263 Mg) = 3 4.78 ( 10 ) m 4 3 263 ( 10 ) g 4

= 1.257 ( 106 ) g # m = 1.26 Mg # m Ans.

*1–4. Convert the following temperatures: (a) 20°C to

TC = (215°F - 32) = 102°C Ans.

1–5. Mercury has a specific weight of 133 kN>m3 when the

133 ( 103 ) N>m3 = rHg ( 9.81 m>s2 )

rHg = 13 558 kg>m3 = 13.6 Mg>m3 Ans.

g = rg = ( 1.32 slug>ft 3 )( 32.2 ft>s2 ) = 42.504 lb>ft 3

Then, the weight of the fuel is

W = g V = ( 42.504 lb>ft 3 )( 50 ft 3 ) = 2.13 ( 103 ) lb = 2.13 kip Ans.

1–7. If air within the tank is at an absolute pressure of

The weight of the air in the tank is

W = rg V = ( 6.910 kg>m3 )( 9.81 m>s2 )( 1.35 m3 )

*1–8. The bottle tank has a volume of 1.12 m3 and contains

The mass of oxygen in the tank is

m = rV = ( 152.44 kg>m3 )( 0.12 m3 )

1–9. The bottle tank has a volume of 0.12 m3 and contains

The plot of p vs TC is shown in Fig. a.

1–10. Determine the specific weight of carbon dioxide

The specific weight of carbon dioxide is

g = rg = ( 5.677 kg>m3 )( 9.81 m>s2 )

1–11. Determine the specific weight of air when the

The specific weight of the air is

*1–12. Dry air at 25°C has a density of 1.23 kg>m3. But if it

p = r1 RT1 = ( 1.23 kg>m3 ) R (298 K) = 366.54 R

p = r2RT2; 366.54 R = ( 1.222005 kg>m3 ) R(TC + 273)

1–13. The tanker carries 1.5(106) barrels of crude oil in its

go = Sogw = 0.940 ( 62.4 lb>ft 3 ) = 58.656 lb>ft 3

Weight of one barrel of oil:

1–14. Water in the swimming pool has a measured depth

At T2 = 35°C, (rw)2 = 994.0 kg>m3. Then

1–15. The tank contains air at a temperature of 15°C and

p1 = r1RT1; 210 ( 103 ) N>m2 = r1(286.9 J>kg # K)(288 K)

Thus, the mass of air at T1 is

m1 = r1V = ( 2.5415 kg>m3 )( 5 m3 ) = 12.70768 kg

For T2 = (273 + 30) K = 303 K and R = 286.9 J>kg # K

Finally, the mass of air that must be removed is

∆m = m1 - m2 = 12.70768 kg - 12.07886 kg = 0.629 kg Ans.

*1–16. The tank contains 2 kg of air at an absolute pressure

Since the volume is constant. Then

p2 = r2RT2 = ( 6.1859 kg>m3 ) (286.9 J>kg # k)(305 K) = 541.30 ( 103 ) Pa

= 541 kPa Ans.

1–17. The tank initially contains carbon dioxide at an

p = ( 3.2779 kg>m3) 3188.9 J>(kg # K)4(TC + 273) K

p = (0.6192 TC + 169.04) ( 103 ) Pa

p = (0.6192 TC + 169.04) kPa where TC is in °C

The plot of p vs TC is shown in Fig. a

1–18. Kerosene has a specific weight of gk = 50.5 lb>ft 3

1–19. The 8-m-diameter spherical balloon is filled with

p = rRT; 106(103) N>m2 = r(2077 J>kg # K)(301 K)

W = mg = ( 45.45 kg )( 9.81 m>s2 ) = 445.90 N = 446 N Ans.

1–1. Represent each of the following quantities with combi

1–2. Evaluate each of the following to three signifi

1–3. Evaluate each of the following to three signifi

*1–16. The tank contains 2 kg of air at an absolute pressure

*1–20. Kerosene is mixed with 10 ft3 of ethyl alcohol so

1–21. The tank is fabricated from steel that is 20 mm

1–27. A solid has a specific weight of 280 lb > ft3. When a

1–29. Sea water has a density of 1030 kg>m3 at its surface,

1–31. A 2-kg mass of oxygen is held at a constant tempera

1–42. If a force of P = 2 N causes the 30-mm-diameter 50 mm