Paquetes Educativos

SCE Guide Trainer Packages
Siemens Automation Cooperates with Education (SCE) | 07/2016
Unrestricted © Siemens AG 2016 siemens.com/sce

Siemens Automation Cooperates with Education (SCE)
Simplify your education in automation
The Siemens SCE program offers a system for sustainable educational support which is unique worldwide.
As a technology leader, we support educational and R&D institutions with our excellent industrial know-how and a specific
range of services. We support secondary and tertiary education, as well as initial non commercial training departments in
the field of automation and drive technology.
Through cooperative partnerships, we help educators to plan their classes in

a targeted, practice-oriented manner and in compliance with the curriculum.
Overview of SCE services

• SCE Curriculums for classes
• SCE Trainer Packages for practice-oriented education
• SCE Courses for providing up-to-date technical knowledge
• SCE Support for your projects/technical books
• Complete Didactic Solutions from our partners
• SCE Contact Partner for individual support
 SCE Internet
Unrestricted © Siemens AG 2016
Page 2 Version 07/2016 Overview I List I Graphic I Cabinet DF FA S EUR&AFR SCE
SCE Trainer Packages for Educators
SCE Trainer Packages are specially compiled hardware and software packages at special prices for up-to-date
educational content in automation and drive technology.
> 80 Trainer Packages for practice-oriented education

• Innovative hardware/software components incl. complete accessories
• Completely and functionally coordinated with one another in terms of content
• Low-cost original industrial components for classes
• Perfectly coordinated with SCE teaching material and aligned with
teaching curriculums/content
• Innovative trends taken into account
 Curriculums  Trainer Packages

Page 3 Version 07/2016 Overview I List I Graphic I Cabinet  TIA Portal DF FA S EUR&AFR SCE
Why do we provide SCE Trainer Packages?
Assembling individual products requires a lot of know-how and is time-consuming. We therefore mapped the relevant
configurations from practical educational use in SCE packages for you.
Who are these Trainer Packages for?

• For research, development and educational institutes
• For partners such as didactic OEM companies which integrate these
SCE Trainer Packages into a didactic solution.
• For industrial and corporate initial training –
with the exception of Trainer Packages, see page 149.
What should be considered when using Trainer Packages?

The products listed may be subject to European/German and/or
US export regulations.
The notes on the Trainer Packages must also be observed.
!!! Important Notes

Overview Trainer Packages
SIMATIC Engineering Software Operator Control & Monitoring SIMATIC Controller

• Overview structure STEP 7 and HMI • Overview structure STEP 7 and HMI • ET 200SP Open Controller
• Single-user license V13
* • WinCC Advanced V13 / WinCC flexible 2008
* • ET 200SP 1512SP F-1 PN *
• 12er Classroom license V13
* • Software for students
* • S7-1512C PN **
•
• 12er Upgrade license V13
* • SIMATIC HMI TP700 /TP1500 COMFORT PANEL
* •
S7-1516F PN/DP / S7-1516 PN/DP
*
•
•
Software for students V13
* •
•
WinCC V13 Professional
* •
S7-314C-2PN/DP / S7-314C-2PN/DP (Upgrade)
S7-315F-2PN/DP
•
Control with SIMATIC standard
•
WinCC V7 6er license
* • S7-300 Safety IOs
•
Control with SIMATIC modular
•
WinCC/Web Navigator V7 6er license
* • S7-315T Technology
•
CFC 12er Classroom license
•
WinCC/Web Navigator V7 6er license (ASIA)
*
•
CFC Student license
IE Softnet 12x Classroom license
Upgrade WinCC V7/Web Navigator V7 6er license
* Distributed IOs
* •
•
ET 200SP
*
SIMIT Simulation
•
ET 200SP with communication module AS-i Master
ET 200SP with input module Energy Meter *
• SIMIT V8.1 Simulation framework
* Process Automation • ET 200SP with communication module IO-Link *
• SIMIT V8.1 Demo version
* • Process control system PCS 7 3er license/upgrade
** • ET 200SP Expansion Analog Safety *
Basic Automation • Process control system PCS 7 6er license
Industrial Communication
*
• LOGO! 12/24V / LOGO! 230V / USB cable
• Process control system PCS 7 AS RTX Box
* • SINEMA - Network Monitoring Software
• LOGO! 12/24V / LOGO! 230V (ETHERNET)
* Drive Technology • CP343-1 Advanced *
• Basic Panels KTP400 for LOGO!
* • SINAMICS G120 Standard drive
• Switch X208
• S7-1200 SPS
* • SINAMICS S120 Servo drive * • Security Switch
•
•
Basic Panels KTP700 for S7-1200
• SIMOTION D410 add-on for S120 ** •
•
IWLAN
FASTCONNECT Connection Kit *
Upgrade STEP 7 V13 Basic for S7-1200 Package
* Sensor Technology • Development Kit
*
SIRIUS Industrial Controls
* • MV440 Code Reader
* Important Notes
• • WorldSkills
CNC-Software SinuTrain
* •
SIMATIC RF200/RF300 RFID System
SIWAREX Weighing systems * • Purchasing Remarks
PLM Software
*
* New / updated package * Package in preparation
SCE List Trainer Packages
 Trainer Packages
System architecture of the Trainer Packages
Operator control & SIMATIC Controller Distributed IOs

SIMATIC Software (STEP 7)
* monitoring (HMI)
S7-1512C PN
S7-1516 PN/DP ** •
•
ET 200SP
*
ET 200SP with communication module AS-i Master
S7-1516F PN/DP
S7-314C-2PN/DP * ET 200SP
** WinAC • ET 200SP with input module Energy Meter *
WinCC prof.
* * TP
TP1500 *
700 S7-315F PN/DP S7-314C 1512SP F-1 PN
Controller S7-300T Open Controller
• ET 200SP with communication module **
IO-Link
Process
automation
WinCC advanced
* PROFINET Controller * • ET 200SP Expansion Analog Safety
*
ET 200SP
• SIMATIC PCS 7
*
PROFINET
PROFIBUS
SIMATIC NET
•
•
SINEMA
CP343-1 Advanced *
• Switch X208
SIMIT Simulation MV440 HR Code reader
• SIMIT V8.1 Simulation
• Security Switch
* SIMATIC RF200/RF 300
* *
Framework * Drive Technology
SINAMICS G120
•
•
IWLAN
Accessories Kit Weighing systems SIWAREX
SINAMICS S120 * • Development Kit
* Sensor Technology
Basic Automation *
• LOGO! * Important Notes
• S7-1200 PLC
• Panels KTP400/700 * CNC Software SinuTrain
* • WorldSkills
* • Order note
PLM Software
*
*
* New / updated package * Package in preparation
Solution Partner demo case with SCE Trainer Packages

Page 8 Version 07/2016 DF FA S EUR&AFR SCE
• Overview
• IO-Link Trainer Package busbar with Infeed system – IO-Link
 Curriculums  Learning Systems

Infeed system with IO-Link (1/2)
1 3-PHASE BUSBAR WITH INFEED LEFT, FOR 2 CIRCUIT BREAKERS, 3RV2917-1A ► Industrial Controls
SIZE S00 AND S0 ► Engineering
1 3-PHASE BUSBAR INCLUDING EXTENSION CONNECTOR, FOR 3 CIRCUIT BREAKERS, 3RV2917-4B Software
SIZE S00 UND S0 ► SIMIT Simulation
5 CONTACTOR BASE, FOR CONTACTOR SIZE S00 WITH SCREW/SPRING-LOADED TERMINAL 3RV2917-7AA00
(SINGLE-UNIT PACKING) ► Basic Automation
2 CABLE CONNECTOR SIZE S00 SPRING-LOADED TERMINAL 3RV2917-5AA00 ► Controller/PLC
2 CIRCUIT BREAKER SZ S00, FOR MOTOR PROTECTION, CLASS 10, A-RELEASE 1.4..2A, N-RELEASE 3RV2011-1BA20 ► Distributed I/Os
26A, SPRING-LOADED TERMINAL, STANDARD SWITCHING CAPACITY ► Operator control &
2 LINK MODULE, ELECTRICAL AND MECHANICAL, FOR 3RV2011 AND 3RT201., SPRING-LOADED 3RA2911-2AA00 monitoring
TERMINAL ► Process Automation
2 CONTACTOR, AC-3, 3KW/400V, 1NC, DC 24V, COM. CAPABILITY 3-POLE, SZ S00 SPRING-LOADED 3RT2015-2BB42-0CC0
► Industrial
TERMINAL
Communication
3 CONTACTOR, AC-3, 3KW/400V, 1NC, DC 24V, 3-POLE, SZ S00 SPRING-LOADED TERMINAL 3RT2015-2BB42
► Sensor Technology
Matching: Trainer package ET 200SP with IO-Link communication module: 6ES7155-6AU00-0AB2 ► Drive Technology
► CNC Software
System requirements:
► PLM Software
Sales note: Schools, colleges and universities, for in-house vocational training departments ► Important Notes
Technical note: See slides below
Order number: 3TK3388-0TP00
 Project manual  SIRIUS

Infeed system with IO-Link (2/2)
1 WIRING KIT, SPRING-LOADED ELECTRICAL AND MECHANICAL, 3RA2913-2AA2 ► Industrial Controls

INCL. MECH. INTERLOCK, FOR REVERSING STARTERS, SIZE S00 ► Engineering
1 FUNCTION MODULE FOR IO-LINK, REVERSING START, SPRING-LOADED TERMINAL, 3RA2711-2BA00 Software
MOUNTED ON CONTACTORS 3RT2S0 COMM. CAPABLE CONTACTOR REQUIRED ► SIMIT Simulation
1 WIRING KIT, SPRING-LOADED ELECTRICAL AND MECHANICAL, INCL. MECH. INTERLOCK, 3RA2913-2BB2
► Basic Automation
FOR STAR-DELTA STARTER, SIZE S00
► Controller/PLC
1 FUNCTION MODULE STAR-DELTA COMPRISING A BASIC MODULE AND 2 COUPLING MODULES WITH 3RA2816-0EW20
INTEGRATED CONNECTING CABLE; TIME RANGE 0.5...60S 24...240V AC/DC FOR 3RT2 CONTACTORS ► Distributed I/Os
1 DIGITAL MONITORING RELAY COS-PHI AND CURRENT MONITORING FOR IO-LINK 90 TO 690V AC, 0.2 3UG4841-2CA40 ► Operator control &
TO 10A OVERSHOOT AND UNDERSHOOT ON DELAY TIME TRIPPING DELAY TIME HYSTERESIS 0.1 TO monitoring
3.0A 2 CHANGE-OVER CONTACTS, SPRING-LOADED TERMINAL ► Process Automation
1 OVERLOAD RELAY 1...4 A FOR MOTOR PROTECTION SIZE S00, CLASS 5...30 3RB3113-4PE0
► Industrial
CONTACTOR ASS. MAIN CIRCUIT: SPR.-LOAD.TERM. AUX.CIRCUIT: SPR.-LOAD.TERM.
Communication
MANUAL-AUTOM. RESET INT. GROUND FAULT DETECTION
1 OPERATOR PANEL FOR DEVICES WITH IO-LINK OPERATOR PANEL FOR SIRIUS 3RA6935-0A
SWITCHING DEVICES WITH IO-LINK ► Drive Technology
► CNC Software
► PLM Software
► Important Notes
Matching: Trainer package ET 200SP with IO-Link communication module: 6ES7155-6AU00-0AB2

Infeed system with IO-Link
► Industrial Controls
► Engineering
Software
► SIMIT Simulation
2 x CIRCUIT 2 x CONTACTOR 3 x CONTACTOR 1 x FM IO-LINK 1 x FM STAR-DELTA 1 x DIGITAL MONITORING 1 x OVERLOAD
3RT2015-2BB42-0CC0 3RT2015-2BB42 3RA2711-2BA002 3RA2816-0EW20 RELAY RELAY ► Controller/PLC
BREAKER
3RV2011-1BA20 3UG4841-2CA40 3RB3113-4PE0
► Distributed I/Os
► Operator control &

monitoring
► Process Automation
► Industrial
Communication
1 x OPERATOR PANEL FOR 1 x 3-PHASE 1 x 3-PHASE 5 x CONTACTOR 2 x CABLE CONNECTOR 2 x LINK MODULE
BUSBAR BUSBAR BASE 3RV2917-5AA00 3RA2911-2AA00 ► Sensor Technology
DEVICES WITH IO-LINK
3RA6935-0A 3RV2917-1A 3RV2917-4B 3RV2917-7AA00 ► Drive Technology
► CNC Software
► PLM Software
► Important Notes
1 x WIRING KIT 1 x WIRING KIT
3RA2913-2AA2 3RA2913-2BB2
Matching: Trainer package ET 200SP with IO-Link communication module: 6ES7155-6AU00-0AB2

Industrial Controls SIRIUS Modular System
Engineering
SIRIUS Industrial Controls 
►
Software
SIRIUS Commanding and Signaling Devices  ► Controller/PLC

monitoring
Safety Integrated 
► Industrial
Communication
Safety Relays 3SK1 ► Sensor Technology
► Drive Technology
► CNC Software
SIRIUS@YouTube  ► PLM Software

► Important Notes
Safety@YouTube 

Engineering Software
• Overview
• Overview STEP 7 and SIMATIC HMI
• Single-user license
• 12er license and upgrade
• 12er Upgrade license for in-house vocational training
• Student license
• Control with SIMATIC standard
• Control with SIMATIC modular
• CFC 12er License
• CFC Student license
• IE Softnet 12er license

System structure for Trainer Packages STEP 7 and SIMATIC HMI
Touch Panel
SIMATIC Software TP700 / TP1500
- STEP 7 as basis PROFIBUS and PROFINET connection
Engineering tools for STEP 7
- S7-PLCSIM Simulation of S7 hardware
- S7-SCL High language similar to Pascal
- S7-GRAPH for sequencers to DIN 1131-3
SIMATIC HMI software - ETHERNET connection for engineering

Human Machine Interface
PROFINET
WinCC with USB
- Advanced level Adapter PROFIBUS
- Smart Option for Panel / PC
- Smart Access
- OPC Interface
ETHERNET connection for engineering
Software Engineering Tool for STEP 7 USB Adapter S7 Controller ET 200SP Open Controller
- SIMATIC CFC 6GK1571-0BA00-0AA0 School package with ET 200SP …
- Control with SIMATIC S7 RS485, PC USB PROFINET and PROFIBUS School package with PROFINET
- SIMATIC NET SOFTWARE including 5 m cable For PROFIBUS only interface
has to be ordered separately.

SIMATIC STEP 7 Professional – Software for Training
1er License
1 x Combo license for interchangeable usage ► Industrial Controls

Totally
of: SIMATIC STEP 7 Professional V13 SP1* Integrated ► Engineering
STEP 7 Professional V13 SP1 * (LAD, FBD, STL), S7-GRAPH, S7-SCL, S7-PLCSIM Automation Software
PORTAL
or: SIMATIC STEP 7 Professional 2010 SR4 ► SIMIT Simulation
STEP 7 V5.5 SP4 (LAD, FBD, STL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP5 ► Basic Automation
Check HW compatibility
1 x Combo license for interchangeable usage for TIA Portal  ► Controller/PLC
of: SIMATIC STEP 7 Safety Advanced V13 SP1* ► Distributed I/Os
SW functionally identical
or: SIMATIC S7 Distributed Safety 5.4 SP5 Update 1 to the industrial version ► Operator control &
monitoring
1 x SINAMICS Startdrive V13 SP1 * for SINAMICS G120 CONTROL UNIT CU240E-2, CU250S-2, as of Firmware V4.6 ► Process Automation
1 x SIMIT SIMULATION FRAMEWORK DEMO VERSION V8.1, see slide 27 and 28 ► Industrial
Communication
► Licenses only for STEP 7 Professional 2010 SR4
1 x SIMATIC S7-IMAP V3.0 SP3 ► Drive Technology
1 x SIMATIC S7-Technology V4.2 SP4 ► CNC Software
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 * V13: also 64 BIT Windows 8.1
Professional, Enterprise ► PLM Software
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
► Important Notes
Sales note: Schools, colleges and universities, for in-house vocational training departments Core product
for vocational
Technical note: Authorization on USB stick (1 stick) World Cup
Industrial
Order number: 6ES7822-1AA03-4YA5 Control 
 Trial/SP/HF Downloads
12er Classroom License

Totally
of: SIMATIC STEP 7 Professional V13 SP1 * Integrated ► Engineering
PORTAL
STEP 7 V5.5 SP4 (LAD, FBD, STL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, S7-PLCSIM V5.4 SP5 ► Basic Automation
12 x Combo license for interchangeable usage Check HW compatibility
for TIA Portal  ► Controller/PLC
of: SIMATIC STEP 7 Safety Advanced V13 SP1 *
or: SIMATIC S7 Distributed Safety 5.4 SP5 Update 1 SW functionally identical
to the industrial version ► Operator control &
monitoring
12 x SINAMICS Startdrive V13 SP1* for SINAMICS G120 CONTROL UNIT CU240E-2 CU250S-2, as of Firmware V4.6
1 x SIMIT SIMULATION FRAMEWORK DEMO VERSION V8.1, see slide 27 and 28
Licenses only for STEP 7 Professional 2010 SR4 ► Industrial
Communication
12 x SIMATIC S7-IMAP V3.0 SP3
12 x SIMATIC S7-Technology V4.2 SP4 ► Sensor Technology
3 x 20 Software for Students, SIMATIC STEP 7 Professional, limited to 365 days via authorization, see slide 19 Students ► Drive Technology
► CNC Software
3 x 20 Software for Students,32 BIT: Windows
SIMATIC STEP77Professional,
Professional,Enterprise,
limited toUltimate
365 daysSP1
via authorization, (Details slide 16)
► Important Notes
Sales note: Schools, colleges and universities, NOT for in-house vocational training departments
Technical note: Authorization on USB stick (1 stick + 3 sticks with 20 software for students each)
Order number: 6ES7822-1BA03-4YA5 Upgrade of STEP 7 Prof. < 2010 et . <V12: 6ES7822-1AA03-4YE5
12x Upgrade for in-house vocational training

Totally
PORTAL
STEP 7 V5.5 SP4 (LAD, FBD, STL) S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6, ► Basic Automation
S7-PLCSIM V5.4 SP5 Check HW compatibility
12 x Combo license for interchangeable usage
of: SIMATIC STEP 7 Safety Advanced V13 SP1 * SW functionally identical
or: SIMATIC S7-Distributed Safety 5.4 SP5 Update 1 to the industrial version ► Operator control &
monitoring
12 x SINAMICS Startdrive V13 SP1 * for SINAMICS G120 CONTROL UNIT CU240E-2, CU250S-2, as of Firmware V4.6 ► Process Automation
1 x SIMIT SIMULATION FRAMEWORK DEMO VERSION V8.1, see slide 27 and 28 ► Industrial
Communication
Licenses only for STEP 7 Professional 2010 SR4
12 x SIMATIC S7-IMAP V3.0 SP3 ► Sensor Technology
12 x SIMATIC S7-Technology V4.2 SP4 ► Drive Technology
► CNC Software
3 x 20 Software for Students, SIMATIC STEP 7 Professional, limited to 365 days via authorization, (Details slide 16)
► Important Notes
Sales note: Schools, colleges and universities, for in-house vocational training departments
Technical note: Authorization on USB stick (1 stick)
Order number: 6ES7822-1BA03-4YE Upgrade of STEP 7 Prof. 2006, 2010 and < V12
SIMATIC STEP 7 Professional Software for students
Single-user license – limited to 365 days
20 x Combo license for interchangeable usage Students ► Industrial Controls

Totally
or: SIMATIC STEP 7 Professional 2010 SR4 PORTAL
STEP 7 V5. 5SP3 (LAD, FBD, STL), S7-GRAPH V5.3 SP7, S7-SCL V5.3 SP6,
S7-PLCSIM V5.4 SP5 Check HW compatibility
20 x SINAMICS Startdrive V13 SP1 * ► Distributed I/Os
SW functionally identical
for SINAMICS G120 CONTROL UNIT CU240E-2; CU250S-2, as of Firmware V4.6 to the industrial version ► Operator control &
monitoring
Software limited to 365 days through authorization ► Process Automation
► Industrial
Package with: Communication
5 * DVDs SIMATIC STEP 7 Professional 2010 SR4 , 5 * DVDs SIMATIC STEP 7 Professional V13 SP1 *
5 * DVDs SIMATIC STEP 7 Professional V13 SP1 * , 5* PLCSIM V 13 SP1 *
5 * DVDs SIMATIC STEP 7 Basic V13 SP1 *, 5 * DVDs SINAMICS Startdrive V13 SP1 * ► Drive Technology
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 * V13: also 64 BIT Windows 8.1 ► CNC Software
Professional, Enterprise
► PLM Software
Sales note: Use only for students for self-study at home. ► Important Notes
Schools, colleges and universities, NOT for in-house vocational training departments
Order number: 6ES7822-1AC03-4YA5
SIMATIC S7 PID Control with SIMATIC
Standard and Modular
Standard control 6ES7860-2AA00-4YX0 ► Industrial Controls

6 x SIMATIC S7, STANDARD PID CONTROL V5.2 SP1, PARAMETRIZATION SW, FLOATING LICENSE FOR 1 INSTALLATION, E-SW, 6ES7830-2AA22-0YX0 ► Engineering
SW AND DOCU ON CD, LICENSE KEY ON USB-STICK Software
1 x STANARD PID CONTROL V5.2 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD 6ES7860-2AA21-0YX0 ► SIMIT Simulation
5 x STANARD PID CONTROL V5.2 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU 6ES7860-2AA21-0YX1
1 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD 6ES7860-4AA01-0YX0
► Controller/PLC
5 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW+DOCU 6ES7860-4AA01-0YX1
Modular control 6ES7860-1AA00-4YX0 ► Operator control &
6 x MODULAR PID CONTROL V5.1 SP1, PARAMETRIZATION SW, FLOATING LICENSE FOR 1 INSTALLATION E-SW, monitoring
6ES7830-1AA11-0YX0
SW AND DOCU ON CD ► Process Automation
1 x MODULAR PID CONTROL, V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU ON CD 6ES7860-1AA10-0YX0
► Industrial
5 x MOD.PID CTRL, FB V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU 6ES7860-1AA10-0YX1 Communication
1 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, SW AND DOCU. ON CD 6ES7860-4AA01-0YX0 ► Sensor Technology
5 x PID SELF TUNER V5.1 SINGLE LICENSE FOR 1 INSTALLATION R-SW, WITHOUT SW AND DOCU 6ES7860-4AA01-0YX1
► CNC Software
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
► PLM Software
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, WINDOWS XP Professional SP3
► Important Notes
Technical note: None available
Order number: 6ES7860-2AA00-4YX0 Standard 6ES7860-1AA00-4YX0 Modular

SIMATIC S7 PID Control with SIMATIC
Standard and Modular
SIMATIC S7 PID controller for 6 licenses ► Industrial Controls

► Engineering
Software
Standard control consisting of:
6 x Parameterization software version 5.2
6 x Function block version 5.2
► Controller/PLC
Integration continuous PID controller, impulse controller,
step controller into the user program starting from SIMATIC S7-313 CPU. ► Distributed I/Os

Modular control consisting of: monitoring
6 x Commissioning tool version 5.1 ► Process Automation
6 x Function block version 5.1 ► Industrial
Extended features when used with the Standard module starting from SIMATIC S7-313 CPU. Communication
Each package contains additionally
6 x PID Self-Tuner V5.1 for online initial parameterization and online adaptation
► CNC Software
while the application is running.
► PLM Software
► Important Notes

SIMATIC CFC
12 x SIMATIC CFC V8.2 Students ► Industrial Controls

► Engineering
3 x 20 Software for Students SIMATIC CFC V8.2 Software
SW limited to 365 days through authorization ► SIMIT Simulation
20 licenses per USB stick.
► Controller/PLC
SW functional identical to
the industrial version ► Operator control &
monitoring
► Industrial
Communication
► CNC Software
► PLM Software
► Important Notes
Order number: 6ES7658-1EX28-0YS5

SIMATIC CFC software for students
Single-user license – limited to 365 days
20 x SIMATIC CFC V8.2 Students ► Industrial Controls

SW limited to 365 days through authorization ► Engineering
20 licenses per USB stick Software
► Controller/PLC
monitoring
► Industrial
Communication
► CNC Software
► PLM Software
► Important Notes
Order number: 6ES7658-1EX28-0YS6

SIMATIC NET Software IE Softnet
12 X 6GK1704-1CW13-0AA0 SIMATIC NET IE SOFTNET-S7 V13 SP2 ► Industrial Controls

Totally
SIMATIC NET SOFTNET-IE S7 V13 SW F. S7-,S5-COMP.-COMM.,OPC; Integrated ► Engineering
PG/OP-COMM., CONF. SW, MAX 64 CONN; SINGLE LIC. F.1 INSTALLATION; Automation Software
R-SW, SW + ELECTR. MAN ON DVD; LICENSE KEY ON USB-STICK; CLASS A; PORTAL
2-LANGUAGES (G,E)
Check HW Compatibility
monitoring
► Industrial
Communication
► CNC Software
System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP1 * V13: also 64 BIT Windows 8.1
32 BIT: WINDOWS 7 Professional, Ultimate SP1
► Important Notes
Order number: 6GK1950-0BB01

Virtual commissioning with SIMIT Simulation Framework
• Overview
• SIMIT V8.1 Simulation Framework and Upgrade
• SIMIT V8.1 Demo Version

SIMIT Simulation Framework V8.1
Full version with one dongle ► Industrial Controls
1. Creation/modification/testing (dongle owner/single-user license) of virtual plants with SIMIT ► Engineering

Software
complete functionalities of SIMIT ULTIMATE version and FLOWNET, CONTEC library
2. Saving of SIMIT models, with demo version (without dongle) observe restrictions
3. Models can be used in demo version by unlimited number of users
► Controller/PLC
Restrictions of demo version have to be observed, see slides 27 and 28
IO limitations when using the demo version monitoring
64 binary inputs I 0.0-E 7.7 ► Process Automation

64 binary outputs O 0.0-A 7.7 ► Industrial
11 analog inputs IW 64-IW 85 Communication
8 analog outputs OW 64-OW 79 ► Sensor Technology
400 components and IO elements
► CNC Software
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 Currently not compatible with
S7-1200/1500 ► PLM Software
► Important Notes
Technical note: Hardware USB dongle
Order number: 6DL5260-0XX18-0YS5 ONLY Upgrade from 8.0 to 8.1: 6DL5260-0XX18-0YS6
 Trial/SP/HF Downloads  SIMIT demo version

SIMIT Simulation Framework V8.1 Demo Version
SIMIT 8.1 Demo Version (without dongle) ► Industrial Controls
The following limitation are in effect for the demo version: ► Engineering
Software
• Simulation is limited to 45 minutes
• Only one coupling to PLCSIM or PRODAVE can be added to the project
• The address space is limited to IB0-IB7, IB64-IB85 for inputs and OB0-OB7, OB64-OB79 for outputs
► Controller/PLC
• The FLOWNET and CONTEC libraries are not supported
• The editor for dynamic graphics, the trend and message function, the macro component editor, the SMD Typical import and the interface
for automatic control are available for test purposes in demo mode
monitoring
• Projects created in demo mode cannot be executed in regular mode and are limited to the SIMIT installation
► Industrial
Communication
► CNC Software
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 Currently not compatible with
S7-1200/1500 ► PLM Software
► Important Notes
Order number: 6DL5260-0AX18-0YT8 (Demo Version)

SIMIT Simulation Framework V8.1, Demo Version
Application versions
► Engineering
Software
SIMIT models ► SIMIT Simulation
► Controller/PLC
Test of PLC user program Test of PLC user program ► Distributed I/Os

monitoring
Educator (dongle owner): Students (demo version without dongle): ► Process Automation
• Creation, adaptation and transfer of models • Use of the models within the restrictions of the demo version ► Industrial
Communication
without IO limits • Create own models with IO limits ► Sensor Technology
• Creation, adaptation and transfer of models • Projects created in the demo version are restricted to the SIMIT ► Drive Technology
for demo version within restrictions of demo version installation, in which they have been created
► CNC Software
► PLM Software
► Important Notes

SIMIT Simulation Framework V8.1, Demo Version
Application versions
► Engineering
SIMIT dongle A with SIMIT V8.1 Software
Educators/ ► Basic Automation

Students:
SIMIT demo version
► Controller/PLC
Students (demo version without dongle): ► Distributed I/Os
• Use the models of any dongle owner while observing ► Operator control &
Creation and exchange the IO limits monitoring
Creation and exchange of
SIMIT models of SIMIT models • Simulation limited to 45 minutes ► Process Automation
with IO limits • Creation of own models with IO limits ► Industrial
• Projects created in demo mode are restricted to the Communication
SIMIT installation, in which they have been created ► Sensor Technology
Educators/
► CNC Software
Students:
► PLM Software
Created ► Important Notes
SIMIT dongle B with SCE V8.1 SIMIT models

Basic Automation
• Overview
• LOGO! 12/24V and 230V/ETHERNET interface
• LOGO! 12/24V and 230V/USB cable
• Basic Panel KTP400 for LOGO! 1er
• Basic Panel KTP400 for LOGO! 6er
• S7-1200
• Basic Panel KTP700 for S7-1200 1er
• Basic Panel KTP700 for S7-1200 6er
• Upgrade STEP 7 V13 Basic for S7-1200 Packages

LOGO! 12/24V or 230V with ETHERNET interface
LOGO! 12/24V ► Industrial Controls
6x LOGO! 12/24 RCE 6ED1052-1MD00-0BA8 ► Engineering

Software
6x LOGO! DM8 12/24R Expansion module 6ED1055-1MB00-0BA2
6x LOGO! Soft Comfort V8 6ED1058-0BA08-0YA1
LOGO! 230V ► Controller/PLC
6x LOGO! 230 RCE 6ED1052-1FB00-0BA8 ► Distributed I/Os
6x LOGO! DM8 230R Expansion module 6ED1055-1FB00-0BA2 ► Operator control &
monitoring
Recommended accessories: ► Industrial

Communication
6AV2123-2DB03-0AA0 6XV1870-3RH60 6GK1950-0BB00
6AV2123-2DB03-0AA1 SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, Trainer Package: FASTCONNECT ► Sensor Technology
Trainer Package: SIMATIC Basic Panel KTP400 CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 connection technology
CONNECTORS, LENGTH 6 M ► Drive Technology
► CNC Software
System requirements: WINXP, WIN7, WIN8 ALL VERSIONS, 32/64 BIT MAC OSX 10.6 TO 10.9 LINUX SUSE 11.3, SP3, K 3.0.76
► PLM Software
Technical note: ETHERNET cable required
Order number: 12/24V : 6ED1057-3SA20-0YA1

230V: 6ED1057-3SA20-0YB1

LOGO! 12/24V or 230V
Available until Dec. 31, 2016
LOGO! 12/24V ► Industrial Controls
5x LOGO! 12/24 RC 6ED1052-1MD00-0BA6 ► Engineering

Software
1x LOGO! PC-cable (USB) 6ED1057-1AA01-0BA0 ► SIMIT Simulation
► Controller/PLC
LOGO! 230V
5x LOGO! 230 RC 6ED1052-1FB00-0BA6
5x LOGO! Soft Comfort V8 6ED1058-0BA08-0YA1 ► Operator control &
monitoring
1x LOGO! PC-cable (USB) 6ED1057-1AA01-0BA0
► Industrial
LOGO! PC-cable Communication
4x LOGO! PC-cable (USB) 6ED1057-1AA01-0BA0 ► Sensor Technology
► CNC Software
System requirements: WINXP, WIN7, WIN8 ALL VERSIONS, 32/64 BIT MAC OSX 10.6 TO 10.9 LINUX SUSE 11.3, SP3, K 3.0.76
► PLM Software
Order number: 12/24V : 6ED1057-3SA00-0YA1 Cable set: 6ED1057-3SA00-0YC0

230V : 6ED1057-3SA00-0YB1

SIMATIC Basic Panel KTP400 for LOGO! ETHERNET 1er
1 X SIMATIC HMI KTP400 BASIC COLOR PN, BASIC PANEL,KEY AND TOUCH OPERATION, 6AV2123-2DB03-0AX0
4" TFT DISPLAY, 65536 COLORS, PROFINET INTERFACE ► Engineering
CONFIGURATION FROM WINCC BASIC V13/STEP 7 BASIC V13 Software
1 X SCALANCE XB005UNMANAGED INDUSTRIAL ETHERNETSWITCH FOR 10/100MBIT/S; WITH 6GK5005-0BA00-1AB2 ► Basic Automation
5 X 10/100MBIT/S TWISTED PAIR PORTS WITH RJ45-SOCKETS; FOR CONFIGURING SMALL
► Controller/PLC
STAR AND LINE TOPOGRAPHIES; LED DIAGNOSTICS, IP20, 24 V DC POWER SUPPLY,
INCL. MANUAL ► Distributed I/Os

monitoring
2 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, 6XV1870-3RH60
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M ► Process Automation
► Industrial
Communication
1 X SIMATIC WINCC BASIC V13 SP1 ENGINEERING SW, FLOATING LICENSE SW 6AV2100-0AA03-0AA5
AND DOCUMENTATION ON DVD, FOR CONFIGURATION OF SIMATIC BASIC PANELS
► CNC Software
System requirements: WINDOWS 7 (32 BIT, 64 BIT), WINDOWS 8 SP1 (64 BIT) ► PLM Software
Totally
Technical note: Authorization for WINCC BASIC on USB stick Integrated
Automation
Order number: 6AV2123-2DB03-0AA1 PORTAL

SIMATIC Basic Panel KTP400 for LOGO! ETHERNET 6er
6 X SIMATIC HMI KTP400 BASIC COLOR PN, BASIC PANEL,KEY AND TOUCH OPERATION, 6AV2123-2DB03-0AX0
4" TFT DISPLAY, 65536 COLORS, PROFINET INTERFACE, CONFIGURATION FROM WINCC BASIC ► Engineering
V13/STEP 7 BASIC V13. Software
6 X SCALANCE XB005 UNMANAGED INDUSTRIAL ETHERNET SWITCH FOR 10/100MBIT/S; WITH 6GK5005-0BA00-1AB2 ► Basic Automation
5 X 10/100MBIT/S TWISTED PAIR PORTS WITH RJ45-SOCKETS; FOR CONFIGURING SMALL
► Controller/PLC
STAR AND LINE TOPOGRAPHIES; LED DIAGNOSTICS, IP20, 24 V DC POWER SUPPLY,
INCL. MANUAL ► Distributed I/Os

monitoring
PREASSEMBLED WITH. 2 RJ45 CONNECTORS, LENGTH 6 M
► Industrial
6 X SIMATIC WINCC BASIC V13 SP1 ENGINEERING SW, FLOATING LICENSE SW 6AV2100-0AA03-0AA5 Communication
AND DOCUMENTATION ON DVD, FOR CONFIGURATION OF SIMATIC BASIC PANELS ► Sensor Technology
► CNC Software
System requirements: WINDOWS 7 (32 BIT, 64 BIT),WINDOWS 8 SP1 (64 BIT) ► PLM Software
Totally
Technical note: Authorization for WINCC BASIC on USB stick Integrated
Automation
Order number: 6AV2123-2DB03-0AA0 PORTAL

SIMATIC Basic Panel KTP400 for LOGO! ETHERNET
► Engineering
Software
► Controller/PLC

monitoring
► Industrial
SIMATIC KTP400 SCALANCE SIMATIC WINCC BASIC V13 SP1 ETHERNET cable Communication
BASIC COLOR PN XB005 ENGINEERING SW 6XV1870-3RH60
6AV2123-2DB03-0AX0 6GK5005-0BA00-1AB2 6AV2100-0AA03-0AA5
► CNC Software
► PLM Software
Package 6AV2123-2DB03-0AA1 Package 6AV2123-2DB03-0AA1
contains 1 x contains 2 x ► Important Notes
Package 6AV2123-2DB03-0AA0 Package 6AV2123-2DB03-0AA0

contains 6 x contains 12 x

SIMATIC S7-1200 AC/DC/RELAY or DC/DC/DC
6 X Alternative: 6ES7214-1BG40-0XB0 ► Industrial Controls

SIMATIC S7-1200, CPU 1214C, COMPACT CPU, AC/DC/RLY, ONBOARD IO: 14 DI 24V DC; 10 DO AC Pack. 6ES7214-1BE30-4AB3 ► Engineering
RELAY 0.5A; 2 AI 0 - 10V DC, POWER SUPPLY: 85 - 264 V AC @ 47 - 63 HZ, MEMORY: 75 KB Software
6 X Alternative: 6ES7214-1AG40-0XB0 ► Basic Automation
SIMATIC S7-1200, CPU 1214C, COMPACT CPU, DC/DC/DC, ONBOARD IO: 14 DI 24V DC; 10 DO 24 V DC -Pack: 6ES7214-1AE30-4AB3
DC; 2 AI 0 - 10V DC, POWER SUPPLY: 20.4 - 28.8 V DC, PROGRAM/DATA MEMORY: 75 KB ► Controller/PLC
6 X SIMATIC S7, STEP 7 BASIC V13 SP1 FLOATING LICENSE, E-SW, SW AND DOCU. ON DVD, 6ES7822-0AA03-0YA5 ► Operator control &
LICENSE KEY ON USB STICK, 2 LANGUAGES (GE,EN), REFERENCE HW: S7-1200 monitoring
6 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, 6XV1870-3RH60 ► Process Automation
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M ► Industrial
6 X SIMATIC S7-1200, SIMULATOR MODULE, 8 CHANNEL SIMULATOR DC INPUT SWITCHES 6ES7274-1XF30-0XA0 Communication
6 X SIMATIC S7-1200, ANALOG OUTPUT SB 1232, 1 AO, +/- 10VDC OR 0 - 20 MA 6ES7232-4HA30-0XB0 ► Sensor Technology
► CNC Software
System requirements: WINDOWS 7 (32 BIT, 64 BIT), WINDOWS 8 SP1 (64 BIT)
► PLM Software
Technical note: Authorization for STEP 7 BASIC on USB stick Totally
Integrated
Order number: AC/DC/RLY DC/DC/DC Automation
6ES7214-1BE30-4AB3 6ES7214-1AE30-4AB3 PORTAL

SIMATIC S7-1200 AC/DC/RELAIS or DC/DC/DC
Packages contains 6 times
► Engineering
Software
► Controller/PLC

monitoring
Compact CPU ANALOG OUTPUT, SB 1232, 1 AO, +/-10VDC SIMULATOR MODULE, ► Process Automation
6ES7214-1BG40-0XB0 OR 0 - 20 MA (11 BIT RESOLUTION) 8 INPUT SWITCHES,
► Industrial
alternatively: 6ES7232-4HA30-0XB0 DC INPUT Communication
6ES7214-1AG40-0XB0 6ES7274-1XF30-0XA0
► CNC Software
► PLM Software
► Important Notes
STEP 7 BASIC V13 SP1 ETHERNET cable

6ES7822-0AA03-0YA5 6XV1870-3RH60

SIMATIC Basic Panel KTP700 for S7-1200 1er
1 X SIMATIC HMI, KTP700 BASIC, BASIC PANEL, KEY AND TOUCH OPERATION, 7" TFT DISPLAY, 65536 6AV2123-2GB03-0AX0
COLORS, PROFINET INTERFACE, CONFIGURATION FROM WINCC BASIC V13/ STEP7 BASIC V13 ► Engineering
SIMATIC HMI, KTP700 BASIC, BASIC PANEL, KEY AND TOUCH OPERATION, 7" TFT DISPLAY, 65536 Software
COLORS, PROFINET INTERFACE, CONFIGURATION FROM WINCC BASIC V13/STEP 7 BASIC V13 ► SIMIT Simulation
1 X SCALANCE XB005 UNMANAGED INDUSTRIAL ETHERNET SWITCH FOR 10/100MBIT/S; WITH 6GK5005-0BA00-1AB2 ► Controller/PLC
5 X 10/100MBIT/S TWISTED PAIR PORTS WITH RJ45-SOCKETS; FOR CONFIGURING SMALL STAR ► Distributed I/Os
AND LINE TOPOGRAPHIES; LED DIAGNOSTICS, IP20, 24 V DC POWER SUPPLY,
INCL. MANUAL monitoring
2 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 6XV1870-3RH60 ► Industrial
4X2, PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M Communication
NOTE: SIMATIC STEP 7 /WinCC V13 is absolutely necessary for engineering – Upgrade see slide 41. ► Drive Technology
► CNC Software
► PLM Software
► Important Notes
Sales note: Schools, colleges and universities, for in-house vocational training departments Totally
Technical note: Engineering Software required Integrated
Automation
Order number: 6AV2123-2GB03-0AA1 PORTAL

SIMATIC Basic Panel KTP700 for S7-1200 6er
6 X SIMATIC HMI, KTP700 BASIC,BASIC PANEL,KEY AND TOUCH OPERATION, 7" TFT DISPLAY, 65536 6AV2123-2GB03-0AX0
COLORS,PROFINET INTERFACE, CONFIGURATION FROM WINCC BASIC V13/ STEP7 BASIC SIMATIC ► Engineering
HMI, KTP700 BASIC, BASIC PANEL, KEY AND TOUCH OPERATION, 7" TFT DISPLAY, 65536 COLORS, Software
PROFINET INTERFACE, CONFIGURATION FROM WINCC BASIC V13/STEP 7 BASIC V13 ► SIMIT Simulation
6 X SCALANCE XB005 UNMANAGED INDUSTRIAL ETHERNET SWITCH FOR 10/100MBIT/S; WITH 6GK5005-0BA00-1AB2 ► Controller/PLC
5 X 10/100MBIT/S TWISTED PAIRPORTS WITH RJ45-SOCKETS;FOR CONFIGURING SMALL STAR- ► Distributed I/Os
AND LINE TOPOGRAPHIES;LED-DIAGNOSIS, IP20,24 V DC POWER SUPPLY,
INCL. MANUAL monitoring
► Industrial
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M Communication
NOTE: SIMATIC STEP 7 /WinCC V13 is absolutely necessary for engineering – Upgrade see slide 41. ► Drive Technology
► CNC Software
► PLM Software
► Important Notes
Sales note: Schools, colleges and universities, for in-house vocational training departments Totally
Technical note: Engineering Software required Integrated
Automation
Order number: 6AV2123-2GB03-0AA0 PORTAL

SIMATIC Basic Panel KTP700 for S7-1200
► Engineering
Software
► Controller/PLC

monitoring
SIMATIC KTP700 SCALANCE XB005 ETHERNET cable ► Industrial
BASIC COLOR PN 6GK5005-0BA00-1AB2 6XV1870-3RH60 Communication
6AV2123-2GB03-0AX0 ► Sensor Technology
Package 6AV2123-2GB03-0AA1 Package 6AV2123-2GB03-0AA1
► CNC Software
► PLM Software
► Important Notes
Package 6AV2123-2GB03-0AA0 Package 6AV2123-2GB03-0AA0
NOTE: SIMATIC STEP 7 /WinCC V13 is absolutely necessary for engineering – Upgrade see slide 41.

SIMATIC STEP 7 Basic V13 – Software for Training
Upgrade
6 x STEP 7 Basic V13 SP1 Upgrade Version V10.5/ V11 /V12 to V13 SP1 ► Industrial Controls
SIMATIC STEP 7 BASIC V13 SP1 TRAINER PACKAGE UPGRADE V13 SP1 ► Engineering
Software
ENGINEERING SOFTWARE; UPGRADE FOR 6 V10.5/V11/V12
SINGLE FLOATING-> V13 SP1 FLOATING; SOFTWARE AND DOCU. ON DVD;
LICENSE KEYS ON USB; 6 LANGUAGES (GE, EN, IT, FR, ES, ZH)
► Controller/PLC
FOR CONFIGURATION OF SIMATIC S7-1200, SIMATIC BASIC PANELS

6 x SINAMICS Startdrive V13 SP1 for SINAMICS G120 CONTROL UNIT CU240E-2 , CU250S-2, as of Firmware V4.6
monitoring
Package with: ► Process Automation
2 * DVDs SIMATIC STEP 7 Basic V13 SP1, 2 * PLCSIM V13 SP1, 2 * DVDs SINAMICS Startdrive V13 SP1 ► Industrial
Communication
For Hardware Package S7-1200, see slide 36 and Basic Panel KTP400, see slide 33, 34 and Basic Panel KTP700, see slide 38, 39 ► Sensor Technology
► CNC Software
► PLM Software
► Important Notes
Totally
Technical note: Authorization on USB stick Integrated
Automation
Order number: 6ES7822-0AA03-4YE5 PORTAL

Controller
Distributed Controller
• S7-1515SP PC + HMI (ET 200SP Open Controller)
• S7-1512SP F-1 PN (ET 200SP Distributed Controller)
Advanced Controller
• S7-1516F PN/DP
• S7-1516 PN/DP
• S7-1512C PN
• S7-314C-2PN/DP
• S7-314C-2PN/DP (Upgrade TIA Portal)
• S7-315F-2PN/DP S7-300 Safety
• S7-315T Technology
• Soft-SPS WinAC F RTX 2010
ET 200SP Open Controller
CPU 1515SP PC with S7-1500 SW controller + HMI 512PT WinCC Runtime Adv.
1 X STANDARD MOUNTING RAIL, LENGTH: 483 mm, FOR 19” CABINETS 6ES5710-8MA11 ► Industrial Controls
1 X SIMATIC ET 200SP OPEN CONTROLLER, CPU 1515SP PC + HMI 512PT, 4 GB RAM, 16 GB CFAST W. ► Engineering
WIND. EMBEDDED STANDARD 7 P 64BIT PREINSTALL., W. S7-1500 SW CONTROLLER CPU 1505S V1.0 Software
PREINSTALLED, WITH WINCC RUNTIME ADVANCED V13 SP1 PREINSTALLED WITH 512 POWERTAGS ► SIMIT Simulation
LICENSE, INTERFACES: 1X SLOT CFAST, 1X SLOT SD/MMC, 1X PLUG F. ET 200SP BUS- ADAPTOR
PROFINET, 1X 10/100/1000 MBIT/S ETHERNET, 3 X USB, 1 X DVI-I GRAPHIC INTERFACE, DOCU DVD ► Basic Automation
6ES7677-2AA41-0FL0
2 X DI 8x24VDC/0,5A HF ► Controller/PLC
6ES7131-6BF00-0CA0
2 X DQ 8x24VDC/0,5A HF 6ES7132-6BF00-0CA0 ► Distributed I/Os
1 X Bus adapter 2X RJ45 6ES7193-6AR00-0AA0 ► Operator control &

monitoring
4 X BU type A0, push-in, 2 infeed terminal separated (digital/analog, max. 24VDC/10A 6ES7193-6BP00-0DA0
1 X Color-coded labels 16 process terminals, gray/red, CC01, 10 units 6ES7193-6CP01-2MA0 ► Process Automation
1 X 1000 Color-coded labels, light gray, 10 sheets DIN A4, perforated, paper 6ES7193-6LA10-0AA0 ► Industrial
1 X Color-coded labels, 16 process terminals, gray/blue, CC02, 10 units 6ES7193-6CP02-2MA0 Communication
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, 6XV1870-3RH60 ► Sensor Technology
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M
1X SIMATIC ODK 1500S V1 SINGLE LICENSE F. 1 INSTALL., E-SW, SW AND DOCU. ON DVD, CLASS A, 2 6ES7806-2CD00-0YA0
► CNC Software
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, Windows 8.1 ► PLM Software
► Important Notes
Technical note: SIMATIC STEP 7 Professional V13 SP1 Update 4 necessary
Order number: 6ES7677-2AA41-4AB1

ET 200SP Open Controller
CPU 1515SP PC with S7-1500 SW controller + HMI 512PT WinCC Runtime Adv.
► Engineering
Software
► Controller/PLC
1 x ET 200SP Bus adapter 2 x DI 8x24 2 x DQ 8x24 4 x Base 1 x ETHERNET Color-coded labels 1x SIMATIC ► Operator control &
Open Controller VDC/ VDC/ Units -cable Labeling strips ODK 1500S V1 monitoring
0,5A HF 0,5A HF SINGLE ► Process Automation
LICENSE
► Industrial
Recommended accessories: Communication
6ES7134-6PA00-0BD0 6ES7137-6BD00-0BA0 3RK7137-6SA00-0BC1 6EP1334-1LB00 6GK1950-0BB00
ANALOG INPUT MODULE, COMMIUNICATION MODULE COMMIUNICATION Power Supply ► Sensor Technology
Trainer Package: FASTCONNECT
AI ENERGY METER IO-LINK MASTER MODULE ASI MASTER INPUT: AC 120/230 V connection technology ► Drive Technology
OUTPUT: DC 24 V/10 A
6ES7193-6BP00-0BD0 6ES7193-6BP00-0DA0 6ES7193-6BP20-0DC0 ► CNC Software
BASEUNIT BASEUNIT BASEUNIT
► PLM Software
6ES7193-6SC00-1AM0
5 SHIELDING TERMINALS ► Important Notes
Expansions: ET 200SP Analog modules: 6ES7155-6AU00-0AB6
NOTE: SIMATIC STEP 7 Professional ≥ V13 SP1 Update 4 is absolutely necessary for configuration

ET 200SP Distributed Controller
CPU 1512SP F-1 PN
1 X STANDARD MOUNTING RAIL, LENGTH: 483 mm, FOR 19” CABINETS 6ES5710-8MA11 ► Industrial Controls
1 X SIMATIC DP, CPU 1512SP F-1 PN FOR ET 200SP, CENTRAL PROCESSING UNIT WITH WORKING ► Engineering
MEMORY 300 KB FOR PROGRAM AND 1 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 3 PORT Software
SWITCH, 48 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY 6ES7512-1SK01-0AB0
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE 6ES7954-8LF02-0AA0
2 X DI 8x24VDC/0,5A HF 6ES7131-6BF00-0CA0
► Controller/PLC
2 X DQ 8x24VDC/0,5A HF 6ES7132-6BF00-0CA0
1 X Bus adapter 2X RJ45 6ES7193-6AR00-0AA0 ► Distributed I/Os
4 X BU type A0, push-in, 2 infeed terminal separated (digital/analog, max. 24VDC/10A 6ES7193-6BP00-0DA0 ► Operator control &
1 X Color-coded labels 16 process terminals, gray/red, CC01, 10 units 6ES7193-6CP01-2MA0 monitoring
1 X 1000 Color-coded labels, light gray, 10 sheets DIN A4, perforated, paper 6ES7193-6LA10-0AA0 ► Process Automation
1 X Color-coded labels, 16 process terminals, gray/blue, CC02, 10 units 6ES7193-6CP02-2MA0
► Industrial
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, 6XV1870-3RH60 Communication
1 X SIMATIC STEP 7 Professional – Software for Training 1er Lizenz, see slide 16 6ES7822-1AA03-4YA5
Expansions: ET 200SP F-Technology 6ES7136-6BA00-0AB1 and/or ET 200SP Analog modules: 6ES7155-6AU00-0AB6 ► CNC Software
► PLM Software
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, Windows 8.1
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 ► Important Notes
Technical note: SIMATIC STEP 7 Professional and Safety Advanced V13 SP1 Update 4 necessary
Order number: 6ES7512-1SK00-4AB2

ET 200SP Distributed Controller
CPU 1512SP F-1 PN
► Engineering
Software
► Controller/PLC
1 x ET 200SP Bus adapter 2 x DI 8x24 2 x DQ 8x24 4 x Base 1 x ETHERNET Color-coded labels 1 x Memory ► Operator control &
Distributed Controller VDC/ VDC/ Units -cable Labeling strips Card 24 MB monitoring
0,5A HF 0,5A HF
► Industrial
Recommended accessories: Communication
6ES7134-6PA00-0BD0 6ES7137-6BD00-0BA0 3RK7137-6SA00-0BC1 6EP1334-1LB00
ANALOG INPUT MODULE, COMMIUNICATION MODULE COMMIUNICATION Power Supply ► Sensor Technology
AI ENERGY METER IO-LINK MASTER MODULE ASI MASTER INPUT: AC 120/230 V
OUTPUT: DC 24 V/10 A ► Drive Technology
6ES7193-6BP00-0BD0 6ES7193-6BP00-0DA0 6ES7193-6BP20-0DC0
BASEUNIT ► CNC Software
BASEUNIT BASEUNIT 6GK1950-0BB00
Trainer Package: FASTCONNECT
STEP 7 Professional
► PLM Software
6ES7193-6SC00-1AM0 connection technology SW for Training 1er Lizenz
5 SHIELDING TERMINALS ► Important Notes
NOTE: SIMATIC STEP 7 Professional and Safety Advanced ≥ V13 SP1 Update 4 is absolutely necessary for configuration

SIMATIC S7-1516F PN/DP
1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC 6EP1333-4BA00 ► Industrial Controls
1 X SIMATIC S7-1500F, CPU 1516F-3 PN/DP, WITH WORKING MEMORY 1,5 MB FOR PROGRAM, 6ES7516-3FN01-0AB0 ► Engineering
5 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 2. INTERFACE, ETHERNET, Software
3. INTERFACE, PROFIBUS, 10 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY ► SIMIT Simulation
1 X SIMATIC S7-1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16; 6ES7521-1BL00-0AB0
6ES7522-1BL01-0AB0 ► Basic Automation
1 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS
1 X SIMATIC S7-1500, ANALOG INPUT MODULE AI 8 X U/I/RTD/TC, 16 BITS OF RESOLUTION, 6ES7531-7KF00-0AB0 ► Controller/PLC
ACCURACY 0.3 %; 8 CHANNELS ► Distributed I/Os
1 X SIMATIC S7-1500, ANALOG OUTPUT MODULE AQ 4 X U/I ST; 16 BITS OF RESOLUTION, 6ES7532-5HD00-0AB0
ACCURACY 0.3 %; 4 CHANNELS IN GROUPS OF 4; ► Operator control &
monitoring
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED 6ES7590-1AE80-0AA0
DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS ► Process Automation
1 X SIMATIC S7-1500, PROFILSCHIENE 482 MM 6ES7590-1AE80-0AA0 ► Industrial
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE 6ES7954-8LF01-0AA0 Communication
4 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES 6ES7592-1AM00-0XB0 ► Sensor Technology
► CNC Software
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1, Windows 8.1
► PLM Software
► Important Notes
for vocational
Technical note: SIMATIC STEP 7 Professional und Safety Advanced V13 SP1 Update 4 necessary World Cup
Industrial
Order number: 6ES7516-3FN00-4AB1 Control 

SIMATIC S7-1516F PN/DP
► Engineering
Software
► Controller/PLC
1x CPU 1x DIGITAL 1x DIGITAL 1x ANALOG 1x ANALOG 1x Power Supply
1516F PN/DP INPUT MODULE OUTPUT MODULE INPUT MODULE OUTPUT MODULE Input AC: 120/230V; ► Operator control &
monitoring
DI 32 X DC24V DQ 32 X DC24V/0.5A AI 8 X U/I/RTD/TC AQ 4 X U/I ST Output DC: 24V, 8A
► Industrial
Communication
► CNC Software
► PLM Software
4x Front 1x Memory 1x ETHERNET 1x SIMATIC ► Important Notes

Connector Card 24 MB Cable S7-1500, MOUNTING
40-Pole RAIL 482 MM
NOTE: SIMATIC STEP 7 Professional and Safety Advanced ≥ V13 SP1 Update 4 is absolutely necessary for configuration

SIMATIC S7-1516 PN/DP
1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY INPUT: 120/230 V AC OUTPUT: 24 V/8 A DC 6EP1333-4BA00 ► Industrial Controls
1 X SIMATIC S7-1500, CPU 1516-3 PN/DP, WITH WORKING MEMORY 1 MB FOR PROGRAM , 6ES7516-3AN01-0AB0 ► Engineering
5 MB FOR DATA, 1. INTERFACE, PROFINET IRT WITH 2 PORT SWITCH, 2. INTERFACE, ETHERNET, Software
3. INTERFACE, PROFIBUS, 10 NS BIT-PERFORMANCE, SIMATIC MEMORY CARD NECESSARY ► SIMIT Simulation
1 X SIMATIC S7-1500, DIGITAL INPUT MODULE DI32 X DC24V, 32 CHANNELS IN GROUPS OF 16; 6ES7521-1BL00-0AB0
1 X SIMATIC S7-1500, DIGITAL OUTPUT MODULE DQ 32 X 24VDC/0.5A; 32 CHANNELS 6ES7522-1BL01-0AB0
1 X SIMATIC S7-1500, ANALOG INPUT MODULE AI 8 X U/I/RTD/TC, 16 BITS OF RESOLUTION, 6ES7531-7KF00-0AB0 ► Controller/PLC
ACCURACY 0.3 %; 8 CHANNELS ► Distributed I/Os
1 X SIMATIC S7-1500, ANALOG OUTPUT MODULE AQ 4 X U/I ST; 16 BITS OF RESOLUTION, 6ES7532-5HD00-0AB0
ACCURACY 0.3 %; 4 CHANNELS IN GROUPS OF 4; ► Operator control &
monitoring
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, INTEGRATED 6ES7590-1AE80-0AA0
DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR RELAYS ► Process Automation
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE 6ES7954-8LF01-0AA0 ► Industrial
4 X SIMATIC S7-1500, FRONTCONNECTOR SCREW-TYPE, 40PIN, FOR 35MM WIDE MODULES 6ES7592-1AM00-0XB0 Communication
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, 6XV1870-3RH60 ► Sensor Technology
1 X SIMATIC STEP 7 Professional – Software for Training 1er Lizenz, siehe Folie 16 ► Drive Technology
► CNC Software
► PLM Software
► Important Notes
Order number: 6ES7516-3AN00-4AB3

SIMATIC S7-1516 PN/DP
► Engineering
Software
► Controller/PLC
1x CPU 1x DIGITAL 1x DIGITAL 1x ANALOG 1x ANALOG 1x Power Supply
1516 PN/DP INPUT MODULE OUTPUT MODULE INPUT MODULE OUTPUT MODULE Input AC: 120/230V; ► Operator control &
monitoring
DI 32 X DC24V DQ 32 X DC24V/0.5A AI 8 X U/I/RTD/TC AQ 4 X U/I ST Output DC: 24V, 8A
► Industrial
Communication
► CNC Software
► PLM Software
4x Front 1x Memory 1x ETHERNET 1x SIMATIC STEP 7 Professional ► Important Notes
Connector Card 24 MB Cable S7-1500, MOUNTING SW for Training 1er Lizenz
40-Pole RAIL 482 MM
For engineering SIMATIC STEP 7 Professional ≥ V13 SP1 Update 4 is absolutely necessary

SIMATIC S7-1512C-1 PN
Overview
Packages
► Engineering
Software
1x CPU 1x Memory Card 1x SIMATIC S7-1500, 1x ETHERNET STEP 7 Professional 1x Power Supply 1x Communication ► Controller/PLC
1512C-1 PN 24 MB MOUNTING RAIL 482 MM -Cable SW for Training Input: AC 120/230V; Processor (PROFIBUS)
1er Licence Otput.: DC 24V, 8A CP 1542-5 Order-No: ► Distributed I/Os
      6ES7512-1CK00-4AB1 ► Operator control &

monitoring
       6ES7512-1CK00-4AB2 ► Process Automation
► Industrial
     6ES7512-1CK00-4AB6 Communication
      6ES7512-1CK00-4AB7
► CNC Software
Recommended accessory: ► PLM Software
6XV1870-3RH60 6GK1950-0BB00 ► Important Notes
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD Trainer Package:
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED FASTCONNECT Accessories Kit
WITH 2 RJ45 CONNECTORS, LENGTH 6 M
For engineering SIMATIC STEP 7 Professional ≥ V13 SP1 Update 4 is absolutely necessary

SIMATIC S7-1512C-1 PN (with Power Supply / without CP for PROFIBUS DP)
1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY FOR SIMATIC S7-1500 INPUT: 120/230 V AC 6EP1333-4BA00 ► Industrial Controls
OUTPUT: 24 V/8 A DC ► Engineering
1 X SIMATIC S7-1500 COMPACT CPU ,CPU 1512C-1 PN, CENTRAL PROCESSING UNIT WITH WORKING 6ES7512-1CK00-0AB0 Software
MEMORY 250 KB FOR PROGRAM AND 1 MB FOR DATA, 32 DIGITAL INPUTS, 32 DIGITAL OUTPUTS, ► SIMIT Simulation
5 ANALOG INPUTS, 2 ANALOG OUTPUTS, 6 HIGH SPEED COUNTERS, 1. INTERFACE: PROFINET IRT
WITH 2 PORT SWITCH, 48 NS BIT-PERFORMANCE, INCL.FRONT CONNECTOR, SIMATIC MEMORY ► Basic Automation
CARD NECESSARY ► Controller/PLC
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, 6ES7590-1AE80-0AA0 ► Distributed I/Os
INTEGRATED DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR
RELAYS
monitoring
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6A, CROSSED TP CABLE 4X2, 6XV1870-3RH60
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M ► Industrial
Communication
1 X SIMATIC STEP 7 Professional – Software for Training 1er Lizenz, see Slides 16 6ES7822-1AA03-4YA5
► CNC Software
► PLM Software
► Important Notes
Order number: 6ES7512-1CK00-4AB1

SIMATIC S7-1512C-1 PN (with Power Supply / with CP for PROFIBUS DP)
1 X SIMATIC PM 1507 24 V/8 A STABILIZED POWER SUPPLY FOR SIMATIC S7-1500 INPUT: 120/230 V AC 6EP1333-4BA00 ► Industrial Controls
OUTPUT: 24 V/8 A DC ► Engineering
1 X SIMATIC S7-1500 COMPACT CPU , CPU 1512C-1 PN, CENTRAL PROCESSING UNIT WITH WORKING 6ES7512-1CK00-0AB0 Software
MEMORY 250 KB FOR PROGRAM AND 1 MB FOR DATA, 32 DIGITAL INPUTS, 32 DIGITAL OUTPUTS, ► SIMIT Simulation
5 ANALOG INPUTS, 2 ANALOG OUTPUTS, 6 HIGH SPEED COUNTERS, 1. INTERFACE: PROFINET IRT
WITH 2 PORT SWITCH, 48 NS BIT-PERFORMANCE, INCL.FRONT CONNECTOR, SIMATIC MEMORY ► Basic Automation
CARD NECESSARY ► Controller/PLC
1 X COMMUNICATION PROCESSOR CP 1542-5 FOR CONNECTING SIMATIC S7-1500 TO PROFIBUS DP 6GK7542-5FX00-0XE0 ► Distributed I/Os
DPV1-MASTER OR DP-SLAVE, S7-AND PG/OP COMMUNICATION, CLOCK SYNCHRONISATION
DIAGNOSTICS, LESS DATA
monitoring
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, 6ES7590-1AE80-0AA0
RELAYS ► Industrial
1 X SIMATIC S7, MEMORY CARD FOR S7-1X00 CPU/SINAMICS, 3,3 V FLASH, 24 MBYTE 6ES7954-8LF02-0AA0 Communication
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6A, CROSSED TP CABLE 4X2, 6XV1870-3RH60 ► Sensor Technology
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M ► Drive Technology
► CNC Software
► PLM Software
► Important Notes

SIMATIC S7-1512C-1 PN (without Power Supply/without CP for PROFIBUS DP)
1 X SIMATIC S7-1500 COMPACT CPU , CPU 1512C-1 PN, CENTRAL PROCESSING UNIT WITH WORKING 6ES7512-1CK00-0AB0 ► Industrial Controls
MEMORY 250 KB FOR PROGRAM AND 1 MB FOR DATA, 32 DIGITAL INPUTS, 32 DIGITAL OUTPUTS, ► Engineering
5 ANALOG INPUTS, 2 ANALOG OUTPUTS, 6 HIGH SPEED COUNTERS, 1. INTERFACE: PROFINET IRT Software
WITH 2 PORT SWITCH, 48 NS BIT-PERFORMANCE, INCL.FRONT CONNECTOR, SIMATIC MEMORY
CARD NECESSARY
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, 6ES7590-1AE80-0AA0 ► Basic Automation
INTEGRATED DIN RAIL FOR MOUNTING OF SMALL COMPONENTS SUCH AS CLAMPS, FUSES OR ► Controller/PLC
RELAYS
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6A, CROSSED TP CABLE 4X2, 6XV1870-3RH60 monitoring
► Industrial
Communication
► CNC Software
► PLM Software
► Important Notes

SIMATIC S7-1512C-1 PN (without Power Supply / with CP for PROFIBUS DP)
1 X SIMATIC S7-1500 COMPACT CPU, CPU 1512C-1 PN, CENTRAL PROCESSING UNIT WITH WORKING 6ES7512-1CK00-0AB0 ► Industrial Controls
MEMORY 250 KB FOR PROGRAM AND 1 MB FOR DATA, 32 DIGITAL INPUTS, 32 DIGITAL OUTPUTS, ► Engineering
5 ANALOG INPUTS, 2 ANALOG OUTPUTS, 6 HIGH SPEED COUNTERS, 1. INTERFACE: PROFINET IRT Software
WITH 2 PORT SWITCH, 48 NS BIT-PERFORMANCE, INCL.FRONT CONNECTOR, SIMATIC MEMORY
CARD NECESSARY
1 X COMMUNICATION PROCESSOR CP 1542-5 FOR CONNECTING SIMATIC S7-1500 TO PROFIBUS DP 6GK7542-5FX00-0XE0 ► Basic Automation
DPV1-MASTER OR DP-SLAVE, S7-AND PG/OP COMMUNICATION, CLOCK SYNCHRONISATION ► Controller/PLC
DIAGNOSTICS, LESS DATA
1 X SIMATIC S7-1500, MOUNTING RAIL 482 MM (APPR. 19 INCH) INCL. GROUNDING ELEMENT, 6ES7590-1AE80-0AA0
monitoring
RELAYS
1 X SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6A, CROSSED TP CABLE 4X2, 6XV1870-3RH60 ► Industrial
PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M Communication
1 X SIMATIC STEP 7 Professional – Software for Training 1er Lizenz, see Slides 16 6ES7822-1AA03-4YA5 ► Sensor Technology
► CNC Software
► PLM Software
► Important Notes

SIMATIC S7-314C-2 PN/DP
1 X SIMATIC S7-300, CPU 314C-2 PN/DP COMP.CPU WITH MPI, 24 DI/16 DO, 4AI, 2AO, 1 PT100, 4 FAST ► Industrial Controls
6ES7314-6EH04-0AB0
COUNTERS (60 KHZ), INTEGRATED DP INTERFACE, INTEGRATED 24V DC POWER SUPPLY, 192 KBYTE ► Engineering
Software
1 X SIMATIC S7-300 PS307 IN:120/230 V AC OUT: 24 V DC/5 A 6ES7307-1EA01-0AA0
2 X SIMATIC S7-300, FRONT CONNECTOR 392 WITH SCREW CONTACTS, 40-POLE 6ES7392-1AM00-0AA0
1 X SIMATIC S7-300, SIMULATOR MODULE SM 374, FOR SIMULATING 16 INPUTS OR 16 OUTPUTS RESP. 8 6ES7374-2XH01-0AA0
INPUTS AND 8 OUTPUTS; 16 SWITCHES, 16 LED ► Controller/PLC
1 X SIMATIC S7-300, RAIL L=480MM 6ES7390-1AE80-0AA0
1 X SIMATIC S7, MICRO MEMORY CARD FOR S7-300/C7/ET 200S IM151 CPU, 3.3 V NFLASH, 512 KBYTES 6ES7953-8LJ30-0AA0 monitoring
1 X SIMATIC S7, PC ADAPTER USB A2 FOR CONNECTION OF S7-200/300/400 C7; WITH USB-CABLE (5M) 6GK1571-0BA00-0AA0 ► Process Automation
Recommended accessory: ► Industrial

Communication
6XV1870-3RH60 6GK1950-0BB00
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD Trainer Package: ► Sensor Technology
WITH 2 RJ45 CONNECTORS, LENGTH 6 M ► Drive Technology
► CNC Software
► PLM Software
32 BIT: WINDOWS 7 Professional, Enterprise, Ultimate SP1
► Important Notes
Technical note: STEP 7 V5.5, V11, V12, V13 required
Order number: 6ES7314-6EH04-4AB3

► Engineering
Software
► Controller/PLC
1x Power Supply PS 307, 1x CPU314C-2 PN/DP 1x Micro Memory Card SIMULATOR MODULE SM 374
AC 120/230V; DC 24V, 5A with 192 KByte 512 KByte monitoring
memory ► Process Automation
► Industrial
Communication
► CNC Software
► PLM Software
1x Rail L=480mm ► Important Notes
2x FRONT PC Adapter
CONNECTOR USB
for SM, 40-Pole

Upgrade Package for TIA Portal
1 X SIMATIC S7-300, CPU 314C-2PN/DP COMPACT CPU WITH 192 KBYTE WORKING MEMORY, 24 DI/16 DO, 6ES7314-6EH04-0AB0
4AI, 2AO, 1 PT100, 4 FAST COUNTERS (60 KHZ), 1. INTERFACE MPI/DP 12MBIT/S, 2. INTERFACE ► Engineering
Software
ETHERNET PROFINET, WITH 2 PORT SWITCH, INTEGRATED 24V DC POWER SUPPLY, FRONT
CONNECTOR (2 X 40-POLE) AND MICRO MEMORY CARD REQUIRED ► SIMIT Simulation
1 X SIMATIC S7, MICRO MEMORY CARD FOR S7-300, 3.3 V NFLASH, 512 KBYTES 6ES7953-8LJ30-0AA0 ► Basic Automation
1 X SIMATIC S7-300, DIGITAL MODULE SM 323, OPTICALLY ISOLATED, 16 DI AND 16 DO, 24V DC, 0.5A, 6ES7323-1BL00-0AA0 ► Controller/PLC
AGGREGATE CURRENT 4A, 1 X 40-POLE ► Distributed I/Os
3 X SIMATIC S7-300, FRONT CONNECTOR 392 WITH SCREW CONTACTS, 40-POLE 6ES7392-1AM00-0AA0 ► Operator control &
monitoring
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M
► Industrial
Recommended accessory: Communication
6GK1950-0BB00
Trainer Package:
FASTCONNECT Accessories Kit ► Drive Technology
► CNC Software
► PLM Software
► Important Notes
Order number: 6ES7314-6EH04-4AB4

Upgrade Package for TIA Portal
► Engineering
Software
► Controller/PLC
3x FRONT ETHERNET-cable ► Operator control &

1x CPU314C-2 PN/DP 1x Digital Modul 1x Micro Memory monitoring
with 192 KByte SM 323, 16 DI and 16 DO, Card 512 KByte CONNECTOR 6XV1870-3RH60
memory DC 24V, 0,5A, 40 POLE for SM, 40-Pole
► Industrial
Communication
► CNC Software
► PLM Software
► Important Notes

SIMATIC S7-315F-2 PN/DP – PROFINET
1 x Rail L=480mm 6ES7390-1AE80-0AA0 ► Industrial Controls

1 x Power Supply PS 307, AC 120/230V; DC 24V, 5A 6ES7307-1EA01-0AA0 ► Engineering
1 x CPU315F-2 PN/DP with 512 KByte, Working Memory 6ES7315-2FJ14-0AB0 Software
1 x Micro Memory Card 512 KByte 6ES7953-8LJ30-0AA0 ► SIMIT Simulation
1 x Digital Module SM 323, 16 DE and 16 DA, C 24V, 0,5A, 40 POLIG 6ES7323-1BL00-0AA0
1 x Front Connector for SM, 40-Pole 6ES7392-1AM00-0AA0
► Controller/PLC
1 x Analog Module SM 334, 4 AE/2 AA, 20-Pole 6ES7334-0CE01-0AA0
1 x Front Connector for SM, 20-Pole 6ES7392-1AJ00-0AA0 ► Distributed I/Os
1 x Distributed Safety V5.4, Floating License 6ES7833-1FC02-0YA5 ► Operator control &
monitoring
Recommended accessory:
6XV1870-3RH60 6GK1950-0BB00
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD Trainer Package: ► Industrial
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED FASTCONNECT Accessories Kit Communication
Complementary to: Trainer Package F-Technology S7-300 – PROFINET 6ES7326-2FS00-4AB1
► CNC Software
► PLM Software
► Important Notes
Order number: 6ES7315-2FH14-4AB1

SIMATIC S7-315F-2 PN/DP – PROFINET
► Engineering
Software
► Controller/PLC
1x Power Supply PS 307, 1x CPU315F-2 PN/DP 1x Micro Memory Card 1x Rail L = 480mm ► Distributed I/Os
AC 120/230V; DC 24V, 5A with 512 KByte Memory 512 KByte ► Operator control &
monitoring
► Industrial
Communication
► CNC Software
1x Front Connector 1x Digital Module SM 323, 1x Analog Module SM 334, 1x Front Connector 1x Distributed
for SM, 40-Pole 16 DI and 16 DO, DC 24V, 4 AE/2 AA, 20-Pole for SM, 20-Pole Safety V5.4, ► PLM Software
0,5A, 40-Pole Floating License ► Important Notes
Recommended accessory:
6XV1870-3RH60 6GK1950-0BB00

SIMATIC S7-300 F-Technology
Safety In-/Output Module
1 x F-Digital Input SM 326, 24 DE 6ES7326-1BK02-0AB0 ► Industrial Controls
1 x F-Digital Output SM 326, 8 DA; DC 24V, 2A 6ES7326-2BF41-0AB0 ► Engineering

Software
1 x Separator Module 6ES7195-7KF00-0XA0
2 x Front Connector for SM, 40-Pole 6ES7392-1AM00-0AA0 ► Basic Automation
► Controller/PLC

monitoring
► Industrial
Communication
Complementary to: Trainer PackageS7-mEC –modular Embedded: 6ES7677-1FD00-4AB1 / CPU315F-2 PN/DP: 6ES7315-2FH14-4AB1 ► Drive Technology
► CNC Software
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1
► PLM Software
► Important Notes
Technical note: Safety-CPU required
Order number: 6ES7326-2FS00-4AB1

SIMATIC S7-300 F-Technology
► Engineering
Software
► Controller/PLC

monitoring
1x F-Digital Input 1x F-Digital Output 2x Front Connector 1x Separator Module
SM 326, SM 326, for SM, 40-Pole ► Industrial
Communication
24 DE 8 DA; DC 24V, 2A
► CNC Software
► PLM Software
► Important Notes

SIMATIC S7-315T Technology-PLC
Motion Control
1 x Mounting rail L=480mm 6ES7390-1AE80-0AA0 ► Industrial Controls
1 x Power supply PS 307, AC 120/230V; DC 24V, 5A 6ES7307-1EA01-0AA0 ► Engineering

Software
1 x 315T-3 PN/DP with 384 KB working memory 6ES7315-7TJ10-0AB0
2 x Front connector for CPU, 40-pole 6ES7392-1AM00-0AA0 ► SIMIT Simulation
1 x Micro Memory Card 8 MB 6ES7953-8LP31-0AA0 ► Basic Automation

1 x Digital Module SM 323, 16 DI and 16 DO, DC 24V, 0,5A, 40-Pole 6ES7323-1BL00-0AA0 ► Controller/PLC
1 x SIMATIC S7-300, Interface Module IM174 for connection analog 6ES7174-0AA10-0AA0 ► Distributed I/Os
drives and step drives via isochronous PROFIBUS ► Operator control &
1 x Front Connector for IM, 40-Pole 6ES7392-1AM00-0AA0 monitoring
1 x SIMATIC NET, connection cable 830-2 for PROFIBUS, preassembled 6XV1830-2AH30 ► Process Automation
cable with two Sub-D connectors 9-pole, terminating resistors, 3m ► Industrial
1 x INDUSTRIAL ETHERNET CORD RJ45/RJ45, CROSSED TP CABLE 4X2, 6XV1870-3RH60 Communication
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M ► Sensor Technology

1 x SIMATIC S7, S7-Technology V4.2, SP4 Optional Package for STEP 7, Floating License 6ES7864-1CC42-0YA5 ► Drive Technology
► CNC Software
► PLM Software
► Important Notes
Technical note: STEP 7 V5.5 required
Order number: 6ES7315-7TJ10-0AB1

SIMATIC S7-315T Technology-PLC
Motion Control
► Engineering
Software
1x Rail 1x Power Supply PS 307, 1x 315T-3 PN/DP 1x Micro Memory Card ► Controller/PLC
L=480mm AC 120/230V; DC 24V, 5A with 384 KB 8 MB ► Distributed I/Os

Working Memory ► Operator control &
monitoring
► Industrial
Communication
► CNC Software
3x Front Connector 1x ETHERNET 1x Digital Module SM 323, 1x SIMATIC S7-300, 1x SIMATIC S7,
► PLM Software
for SM, 40-Pole Cable 16 DI and 16 DO, DC 24V, Interface Module IM174, S7-Technology V4.2 SP4
► Important Notes
0.5A, 40-Pole for connection of analog Options package for
drives and step drives STEP 7, Floating license
via isochronous PROFIBUS

SIMATIC WinAC RTX F 2010 PC-based Control
1x WinAC Basis RTX F 2010 (6ES7671-1RC08-0YA0) ► Industrial Controls
1x CP 5622 PCI EXPRESS X1-CARD FOR CONNECTING A PG OR PC ► Engineering

Software
WITH PCI EXPRESS-BUS TO PROFIBUS OR MPI (6GK1562-2AA00)
Single License for 1 Installation
Runtime-SW, SW and
► Controller/PLC
Documentation on DVD
SW-Class A, 3-speaking (D,E,F) ► Operator control &
monitoring
Reference-Hardware: SIMATIC PC, SIMATIC S7-mEC
► Industrial
Communication
► CNC Software
► PLM Software
System requirements: 32 BIT: Windows 7 Professional, Ultimate SP1, Windows XP Professional SP3, INTERVALZERO RTX
► Important Notes
Order number: 6ES7671-1RC08-0YS0

Distributed IOs
• Overview
• Basic modules
• ET 200SP
• ET 200SP with communication module – AS-i Master
• ET 200SP with input module – Energy Meter
• ET 200SP with communication module – IO-Link
• Expansion modules
• ET 200SP expansion – Analog
• ET 200SP expansion – Safety

SIMATIC ET 200 SP
1 X Standard mounting rail, length: 483 mm, for 19” cabinets 6ES5710-8MA11
1 X IM155-6PN HF including server module ► Engineering

6ES7155-6AU00-0CN0
Software
2 X DI 8X24VDC/0.5A HF 6ES7131-6BF00-0CA0
2 X DQ 8X24VDC/0.5A HF 6ES7132-6BF00-0CA0
1 X Bus adapter 2X RJ45 6ES7193-6AR00-0AA0
4 X BU type A0, push-in, 2 infeed terminal separated (digital/analog, max. 24VDC/10A 6ES7193-6BP00-0DA0 ► Controller/PLC
1 X Color-coded labels 16 process terminals, gray/red, CC01, 10 units 6ES7193-6CP01-2MA0 ► Distributed I/Os
1 X 1000 Color-coded labels, light gray, 10 sheets DIN A4, perforated, paper 6ES7193-6LA10-0AA0 ► Operator control &
1 X Color-coded labels, 16 process terminals, gray/blue, CC02, 10 units 6ES7193-6CP02-2MA0 monitoring
► Industrial
Communication
Expansions: ET 200SP F-Technology 6ES7136-6BA00-0AB1 and/or ET 200SP Analog modules: 6ES7155-6AU00-0AB6
► CNC Software
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 ► PLM Software
► Important Notes
Technical note: STEP 7 V5.5 or V13 required
Order number: 6ES7155-6AU00-0AB0

SIMATIC ET 200 SP
► Engineering
Software
► Controller/PLC

1x IM 155-6 PN HF Bus adapter 2 X DI 8x24VDC/ 2 X DQ 8x24VDC/ 4 X Base Units monitoring
incl. server module 0.5A HF 0.5A HF
► Industrial
Communication
Recommended accessories: ► Drive Technology

6XV1870-3RH60 ► CNC Software
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD
RJ45/RJ45, CROSSED TP CABLE 4X2, ► PLM Software
PREASSEMBLED WITH 2 RJ45 CONNECTORS,
LENGTH 6 M ► Important Notes
6GK1950-0BB00
Color-coded labels Trainer Package: FASTCONNECT connection technology
Labeling strips

SIMATIC ET 200 SP with AS-i Master communication module
1 X Standard mounting rail. 35mm, length 483 mm, for 19“ cabinets 6ES5710-8MA11

6ES7155-6AU00-0CN0
Software
2 X DI 8x24VDC/0.5A HF 6ES7131-6BF00-0CA0
2 X DQ 8x24VDC/0.5A HF 6ES7132-6BF00-0CA0
1 X Bus adapter 2xRJ45 6ES7193-6AR00-0AA0
4 X BU type A0, 16 push-in, 2 infeed terminals separated (digital/analog max 24VDC/10A) 6ES7193-6BP00-0DA0 ► Controller/PLC
1 X Color-coded labels 16 process terminals, gray/red, CC01, 10 units 6ES7193-6CP01-2MA0 ► Distributed I/Os
1 X 1000 labeling strips, light gray, 10 sheets DIN A4, perforated, paper 6ES7193-6LA10-0AA0 ► Operator control &
1 X Color-coded labels 16 process terminals, gray/blue, CC02, 10 units 6ES7193-6CP02-2MA0 monitoring
1 X CM AS-i MASTER ST ET 200SP (AS-i V3.0) 3RK7137-6SA00-0BC1
► Industrial
1 X BU type C0, BU20-P6+A2+4D 6ES7193-6BP20-0DC0 Communication
Expansions: ET 200SP F-Technology 6ES7136-6BA00-0AB1 and/or ET 200SP Analog modules: 6ES7155-6AU00-0AB6 ► Drive Technology
► CNC Software
► Important Notes
Technical note: STEP 7 V13 required

SIMATIC ET 200SP with AS-i Master communication module
► Engineering
Software
► Controller/PLC

1x IM 155-6 PN HF Bus adapter 2 X DI 8x24VDC/ 2 X DQ 8x24VDC/ 4 X Base Units Color-coded labels monitoring
incl. server module 0.5A HF 0.5A HF Labeling strips
► Industrial
Communication

6GK1950-0BB00
1 X CM AS-i MASTER 1 X Base Units Trainer Package: FASTCONNECT connection technology

SIMATIC ET 200SP with Energy Meter input module
1 X Standard mounting rail 35 mm, length: 483 mm, for 19” cabinets 6ES5710-8MA11

6ES7155-6AU00-0CN0
Software
2 X DQ 8x24VDC/0.5HF 6ES7132-6BF00-0CA0
4 X BU type A0, 16 push-in, 2 infeed terminals separated (digital/analog, max. 24VDC/10A) 6ES7193-6BP00-0DA0 ► Controller/PLC
1 X Color-coded lablels 16 process terminals, gray/red, CC01, 10 units 6ES7193-6CP01-2MA0 ► Distributed I/Os
1 X 1000 Labeling strips, light gray, 10 sheets DIN A4, perforated, paper 6ES7193-6LA10-0AA0 ► Operator control &
1 X AI Energy Meter ST 6ES7134-6PA00-0BD0
1 X BASEUNIT PUSH-IN TERMINALS, WITHOUT AUX TERMINALS, JUMPERED TO LEFT 6ES7193-6BP00-0BD0 ► Industrial
Communication
1 X Shielding terminals, 5 units 6ES7193-6SC00-1AM0
► CNC Software
► Important Notes

SIMATIC ET 200SP with Energy Meter input module
► Engineering
Software
► Controller/PLC

► Industrial
Communication

6GK1950-0BB00
1 X Energy 1 X Base Units 1 X shielding Trainer Package: FASTCONNECT connection technology
Meter terminals

SIMATIC ET 200SP with IO-Link communication module
1 X Standard mounting rail 35 mm, length: 483 mm, for 19” cabinets ► Industrial Controls
6ES5710-8MA11
6ES7155-6AU00-0CN0 Software
2 X DQ 8x24VDC/0.5HF 6ES7132-6BF00-0CA0
4 X BU type A0, 16 push-in, 2 infeed terminals separated (digital/analog, max. 24VDC/10A) 6ES7193-6BP00-0DA0 ► Controller/PLC
1 X Color-coded lablels 16 process terminals, gray/red, CC01, 10 units 6ES7193-6CP01-2MA0 ► Distributed I/Os
1 X 1000 Labeling strips, light gray, 10 sheets DIN A4, perforated, paper 6ES7193-6LA10-0AA0 ► Operator control &
1 X BU type A0, 16 push-in, 2 infeed terminals separated (digital/analog, max.24VDC/10A) 6ES7193-6BP00-0DA0 ► Process Automation
1 X CM 4xIO-Link ST 6ES7137-6BD00-0BA0 ► Industrial
1 X Color-coded labels 16 process terminals, gray/blue, CC04, 10 units 6ES7 193-6CP04-2MA0 Communication
Matching: Trainer package SIRIUS Industrial Controls 3TK3388-0TP00 ► Sensor Technology
► CNC Software
► Important Notes
for vocational
Technical note: STEP 7 V13 required World Cup
Industrial
Order number: 6ES7155-6AU00-0AB2 Control 

SIMATIC ET 200SP with IO-Link communication module
► Engineering
Software
► Controller/PLC

► Industrial
Communication
Recommended accessories: ► Sensor Technology
6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD ► Drive Technology
RJ45/RJ45, CROSSED TP CABLE 4X2,
PREASSEMBLED WITH 2 RJ45 CONNECTORS, ► CNC Software
LENGTH 6 M
► PLM Software
6GK1950-0BB00
Trainer Package: FASTCONNECT connection technology ► Important Notes
1 X CM 4xIO-Link ST 1 X Base Units
Matching: Trainer package SIRIUS Industrial Controls 3TK3388-0TP00

SIMATIC ET 200SP – Analog modules expansion
SIMATIC ET 200SP Analog modules expansion consisting of: ► Industrial Controls

► Engineering
2 X AI 2xU/I 2-/4-wire HS 6ES7134-6HB00-0DA1 Software
1 X AQ 2xU/I HS 6ES7135-6HB00-0DA1 ► SIMIT Simulation
3 X BU type A0, 16 push-in, 2 infeed terminals (digital/analog, max. 24VDC/10A) 6ES7193-6BP00-0DA0
1 X Shielding terminals,5 units 6ES7193-6SC00-1AM0
1 X Color-coded labels 16 process terminals, gray/red/blue, CC03, 10 units 6ES7193-6CP03-2MA0 ► Controller/PLC

monitoring
► Industrial
Communication
2 x AI 2xU/I 1 x AQ 2xU/I HS 5X Shielding terminals Color-coded labels 3 x Base
Units ► Drive Technology
2-/4-wire HS
► CNC Software
► Important Notes
for vocational
Technical note: STEP 7 V13 required World Cup
Industrial
Order number: 6ES7155-6AU00-0AB6 Control 

SIMATIC ET 200SP – Safety modules expansion
SIMATIC ET 200SP Safety modules expansion consisting of: ► Industrial Controls

1 X ELECTRONIC MODULE F-DI 8x24VDC HF 6ES7136-6BA00-0CA0 ► Engineering
1 X ELECTRONIC MODULe F-DQ 4x24VDC/2A PM HF 6ES7136-6DB00-0CA0 Software
1 X ELECTRONIC MODULe F-RQ DC24V/AC24..230V/5A 6ES7136-6RA00-0BF0 ► SIMIT Simulation
2 X BASEUNIT BU type A0, 16 push-in, 2 infeed terminals separated (digital/analog, max. 24VDC/10A) 6ES7193-6BP00-0DA0
1 X BASEUNIT BU type F0 6ES7193-6BP20-0BF0
1 X SIMATIC ET 200SP, 1000 labeling strips, yellow 6ES7193-6LA10-0AG0 ► Controller/PLC
1 X Color-coded labels, 16 process terminals, gray/red, CC01, 10 units 6ES7193-6CP01-2MA0 ► Distributed I/Os
1 X Color-coded labels, 16 process terminals, gray/blue, CC02, 10 units 6ES7193-6CP02-2MA0
monitoring
► Industrial
Communication
1x F-RQ Labeling ► Sensor Technology

1x F-DI 1x F-DQ strips
8x24VDC HF 4x24VDC/2A PM HF DC24V/AC24..230V/5A 3 x Base Units
► CNC Software
► Important Notes
Order number: 6ES7136-6BA00-0AB1

Operator control & monitoring
• Overview
• Overview STEP 7 and HMI
• WinCC Advanced V13/WinCC flexible 2008 SP3
• WinCC Advanced V13/WinCC flexible 2008 SP3
Software for students
• SIMATIC HMI TP700/TP1500 COMFORT PANEL
• WinCC/Web Navigator Diagnostics V13 Professional
• SIMATIC WinCC V7.3
• SIMATIC WinCC/Web Navigator Diagnostics V7.3
• SIMATIC WinCC/Web Navigator Diagnostics V7.3 – ASIA

Trainer Packages
Overview structure STEP 7 and SIMATIC HMI
Touch- or Operator-Panel
SIMATIC Software TP700 / TP1500
- STEP 7 as the Basis PROFIBUS and PROFINET connection
Engineering tools for STEP 7
- S7-PLCSIM Simulation of S7-Hardware
- S7-SCL similar to Pascal
- S7-GRAPH for sequence control with DIN1131-3
SIMATIC HMI software – ETHERNET connection for Engineering

Human Machine Interface
PROFINET
WinCC with USB-
- Advanced level Adapter PROFIBUS
- Smart Option for Panel / PC
- Smart Access
- OPC-Interface
ETHERNET connection for Engineering
Software Engineering Tool for STEP 7
- SIMATIC CFC USB-Adapter S7- Controller ET 200SP Open Controller.
- PID Control with SIMATIC 6GK1571-0BA00-0AA0 Packages with PROFINET ET 200SP …
- SIMATIC NET Software S7 RS485, PC USB and PROFIBUS Packages with PROFINET
including 5 m cable For PROFIBUS only interface
has to b ordered separately

SIMATIC WinCC Advanced V13 / WinCC flexible 2008 SP3
6 x Combo-license for freely interchangeable usage of Engineering SW ► Industrial Controls

Totally
of: SIMATIC WinCC Advanced V13 SP1 * Integrated ► Engineering
or: SIMATIC WinCC flexible 2008 SP3 Automation Software
PORTAL
6 x Option and Runtime software, see slide 81
Additionally included in the package 6AV2102-0AA03-0AS5: Students ► Distributed I/Os

2 x 20 SIMATIC WinCC Advanced V13 SP1 * / WinCC flexible 2008 SP3 for Students, see slide 82 the industrial version ► Operator control &
Software is limited to 365 days through authorization monitoring
Core product ► Industrial
for vocational Communication
World Cup
Industrial ► Sensor Technology
Control 
System requirements: * V13: also 64 BIT Windows 8.1 ► CNC Software

64 BIT: Windows 7 Professional, Enterprise (not N), Ultimate SP1 Professional, Enterprise
32 BIT: Windows 7 Professional, Enterprise (not N), Ultimate SP1 ► PLM Software
► Important Notes
Technical note: Authorization on USB stick (1 stick) Upgrade (to 2008 SP3) from 2008, V11, V12 to Advanced V13
Order number: 6AV2102-0AA03-0AS5 6AV6613-1XA01-3CS0 6AV2102-4AA03-0AS5

SIMATIC WinCC Advanced V13 SP1 / WinCC flexible 2008 SP3
Option and Runtime Software
WinCC Advanced V13 SP1 ► Industrial Controls
WinCC RT Advanced (128 Power Tags) ► Engineering

Software
WinCC Recipes for RT Advanced
WinCC Logging for RT Advanced ► Basic Automation
WinCC Sm@rtServer for RT Advanced ► Controller/PLC
WinCC Sm@rtServer for SIMATIC Panel ► Distributed I/Os

monitoring
WinCC flexible 2008 SP3 ► Process Automation
WinCC flexible 2008 SP 3 Runtime (128 Power Tags) ► Industrial

Communication
WinCC flexible/Sm@rtAccess for Panels
WinCC flexible/Sm@rtAccess for PC ► Drive Technology
WinCC flexible/Sm@rtService for Panels ► CNC Software
WinCC flexible/Sm@rtService for PC ► PLM Software
WinCC flexible/OPC-Server for PC ► Important Notes
WinCC flexible/Archives for PC

WinCC flexible/Recipes for PC

SIMATIC HMI WinCC Advanced V13/WinCC flexible 2008 SP3
Single License for Students – limited to 365 days
20 x Combo-license for interchangeable usage the Engineering SW Students ► Industrial Controls

Totally
of : SIMATIC WinCC Advanced V13 SP1* Integrated ► Engineering
or: SIMATIC WinCC flexible 2008 SP3 Automation Software
PORTAL
Licences limited to 365 days through authorization
Runtime Licences: for TIA Portal  ► Controller/PLC
20 x SIMATIC WinCC RT Advanced V13 SP1 * -128 PowerTags Students ► Distributed I/Os
20 x SIMATIC WinCC flexible 2008 Runtime SP3 - 128 PowerTags the industrial version ► Operator control &
Software is limited to 365 days through authorization monitoring
► Industrial
Package with: Communication
10 * DVDs WinCC Advanced V13 SP1 and
10 * DVDs SIMATIC WinCC flexible 2008 SP3
► CNC Software
* V13: also 64 BIT Windows 8.1
System requirements: 64 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP1 Professional, Enterprise ► PLM Software
32 BIT: WINDOWS 7 Professional, Enterprise (not N), Ultimate SP1
► Important Notes
Technical note: Authorization on USB-Stick
Order number: 6AV2102-0AA03-0AS7

SIMATIC HMI TP700 / TP1500 COMFORT, COMFORT PANEL
with PROFINET and MPI/PROFIBUS DP INTERFACE
alternative: ► Industrial Controls

Totally
1 x 7” SIMATIC HMI TP700 COMFORT, Touch Panel with 6AV2124-0GC01-0AX0 Integrated ► Engineering
PROFINET and MPI/PROFIBUS DP INTERFACE Automation Software
(Panel with integrated switch for 2 x RJ 45 ports) PORTAL
alternative:
1 x 15“ SIMATIC HMI TP1500 COMFORT, Touch Panel with 6AV2124-0QC02-0AX0 Check HW Compatibility
PROFINET and MPI/PROFIBUS DP INTERFACE for TIA Portal  ► Controller/PLC
(Panel with integrated switch for 2 x RJ 45 ports) ► Distributed I/Os
Additionally the package contains the industrial version ► Operator control &
monitoring
• 1 x Engineering, Option and Runtime SW and license SIMATIC WinCC Advanced V13 SP1, see slide 80
1 x SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, 6XV1870-3RH60 ► Process Automation
CAT 6, CROSSED TP CABLE 4X2, PREASSEMBLED W. 2 RJ45 CONNECTORS, LENGTH 6 M Core product ► Industrial
for vocational Communication
World Cup
Industrial ► Sensor Technology
TP 700 / 1500 can only be configured with WinCC Comfort, Advanced, Prof. V11 SP2 , V12, V13 Control 
► CNC Software
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1. Windows 8.1 Professional, Enterprise
► PLM Software
► Important Notes
Order number: 6AV2133-4AF00-0AA0 (with TP700) 6AV2133-4BF00-0AA0 (with TP1500)

SIMATIC WinCC/Web Navigator Diagnostics V13 SP1 Professional
Classroom License
WinCC/Web Navigator Diagnostics V13 SP1 Professional ► Industrial Controls

Totally
6 x WinCC V13 SP1, version RC 4096 variables Integrated ► Engineering
6 x WinCC/Web Navigator Diagnostics Server V13 SP1 Automation Software
6 x WinCC/Web Navigator Diagnostics Client V13 SP1 PORTAL
► Controller/PLC

monitoring
► Industrial
Communication
► CNC Software
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1. Windows 8.1 Professional, Enterprise
► PLM Software
► Important Notes
Technical note: Authorization on USB stick
Order number: 6AV2105-0HA03-0AS0

SIMATIC WinCC V7.3 SE Update 1
Classroom License
WinCC Trainer Package V7.3 SE Update 1 ► Industrial Controls
6x WinCC V7.3 SE Update 1 RC 2048 variables ► Engineering

Software
Upgrade WinCC and WinCC/Web Navigator V7.0 SP3
6x WinCC RC Upgrade, V6.0  V7.0 SP3, V6.2  V7.0 SP3, RC 2048 variables
► Controller/PLC
6x WinCC/WebNavigator Upgrade, V6.0  V7.0 SP3, V6.2  V7.0 SP3

Upgrade WinCC and WinCC/Web Navigator V7.3 SE Update 1 monitoring
6x WinCC RC Upgrade, V6.2  V7.3, V7.0  V7.3, RC 2048 variables ► Process Automation
6x WinCC/WebNavigator Upgrade, V6.2  V7.3, V7.0  V7.3 ► Industrial
Communication
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 ► CNC Software
► PLM Software
Order number: 6AV6381-1BP07-3AX5 Upgrade: 6AV6381-1BP07-3AX3 from V6.2 /7.0 to V7.3

6AV6381-1BP07-0AX3 from V6.0/6.2 to V7.0

SIMATIC WinCC/Web Navigator V7.3 SE Update 1 – Diagnostics
Classroom License
WinCC/Web Navigator V7.3 SE Update 1 ► Industrial Controls

Software
6x WinCC/Web Navigator Diagnostics Server V7.3 SE Update 1
6x WinCC/Web Navigator Diagnostics Client V7.3 SE Update 1
Upgrade WinCC und WinCC/Web Navigator V7.0 SP3 ► Controller/PLC
6x WinCC RC Upgrade, V6.0  V7.0 SP3, V6.2  V7.0 SP3, RC 2048 variables ► Distributed I/Os
6x WinCC/WebNavigator Upgrade, V6.0  V7.0 SP3, V6.2  V7.0 SP3 ► Operator control &
monitoring
Upgrade WinCC und WinCC/Web Navigator V7.3 SE Update 1
6x WinCC RC Upgrade, V6.2  V7.3, V7.0  V7.3, RC 2048 variables
► Industrial
6x WinCC/WebNavigator Upgrade, V6.2  V7.3, V7.0  V7.3 Communication
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 ► CNC Software
► PLM Software
Order number: 6AV6371-1DH07-3AX5 Upgrade: 6AV6381-1BP07-3AX3 from V6.2/7.0 to V7.3

6AV6381-1BP07-0AX3 from V6.0/6.2 to V7.0

SIMATIC WinCC/Web Navigator V7.3 SE Update 1 ASIA – Diagnostics
Classroom License
WinCC/Web Navigator V7.3 SE Update 1 – ASIA / Diagnostics ► Industrial Controls

Software
6x WinCC/Web Navigator Diagnostics Server V7.3 SE Update 1
6x WinCC/Web Navigator Diagnostics Client V7.3 SE Update 1
► Controller/PLC

monitoring
► Industrial
Communication
► CNC Software
► PLM Software
► Important Notes
Order number: 6AV6371-1DH07-3AV5

Process Automation
• Overview
• Process control system SIMATIC PCS 7 – 3er SW License/Upgrade
• Process control system SIMATIC PCS 7 – 6er Software License
• Process control system SIMATIC PCS 7 AS RTX Box – Hardware

Process control system SIMATIC PCS 7
3er License/Upgrade
1x DVD: PCS 7 Software V8.2 ► Industrial Controls

1x Paper: Certificate of License (A5E00276662) ► Engineering
1x Stick: License Key USB Stick with 3 * FLOATING LICENSES Software
► Controller/PLC

monitoring
► Industrial
Communication
System requirements: Windows 7 SP1 Ultimate/Enterprise (32- or 64-bit) Windows Server 2008 R2 SP1 Standard Edition (64-bit) ► CNC Software
► PLM Software
► Important Notes
Order number: 6ES7650-0XX28-0YS5 Upgrade: 6ES7650-0XX08-0YE5 from V7.1 to V8.0

6ES7650-0XX28-0YE5 from V8.0, 8.1 to V8.2

Process control system SIMATIC PCS 7
6er License
Equivalent to 2 x SIMATIC PCS 7 – 3er license, see slide 89 ► Industrial Controls

► Engineering
Software
► Controller/PLC

monitoring
► Industrial
Communication
► CNC Software
► PLM Software
System requirements: Windows 7 SP1 Ultimate/Enterprise (32- or 64-bit) Windows Server 2008 R2 SP1 Standard Edition (64-bit)
► Important Notes
Order number: 6ES7650-0XX28-2YS5

Process control system SIMATIC PCS 7 AS RTX Box
Package
Main components in the package:
► Engineering
• 1 x SIMATIC PCS 7 AS RTX Box 427C Software
• 1 x ET 200M – Station with 7DE(144), 3DA(64), 1AE(8), 1AA(8) Assemblies ► SIMIT Simulation
• 1 x SITOP power supply 20A with Front Connector and Communication Cable ► Basic Automation
Details: see slide 92, 93 ► Controller/PLC
Please Note:
• PCS 7 Licenses additional required, see slide 89, 90 monitoring
• Trainer Package adjusted on PCS 7 training curriculums
► Industrial
Communication
Note: The PCS7 AS RTX Box Trainer Package consist of two sub packages. They have and can be ordered only together. The split
into two orders numbers is caused by logistic reasons. ► Drive Technology
► CNC Software
► PLM Software
System requirements: Windows 7 SP1 Ultimate/Enterprise (32 or 64 Bit) Windows Server 2008 R2 SP1 Standard Edition (64 Bit)
► Important Notes
Technical note: See above
Order number: 6ES7654-0UE23-0XS1 + 6ES7153-2BA10-4AB1

SIMATIC PCS 7 AS RTX Box (PROFIBUS) 6ES7654-0UE23-0XS1 only in
combination with 200M 6ES7153-2BA10-4AB1 for RTX (see next page)
1x SIMATIC PCS 7 AS RTX - PROFIBUS AUTOMATION SYSTEM BASED ON IPC427D CORE I7-3517UE, 6ES765-40UE23-0XX1 ► Industrial Controls
2X1,7GHZ; 4GB DDR3 RAM; SSD 80 GB MLC INTERNAL; 2 X GBIT LAN (RJ45) ONBOARD; (ONBOARD); ► Engineering
CP5622 ONBOARD 4 X USB V3.0 (HIGH CURRENT); 24V DC POWER SUPPLY; W/O OPT. DEVICE, FDD, Software
MOUSE, KEYBOARD AND MONITOR; WINDOWS 7 ULTIMATE, MUI (EN/GE/FR/IT/SP/CH), 32BIT; WINAC
RTX 2010 SOFTWARE CONTROLLER; WINAC RTX 2010, PCS 7 RTX AND AS PO 100 LIZENZ
INTEGRATED; PREINSTALLED FOR PCS 7 OPERATING ► Basic Automation
1x SIMATIC DP, HART ANALOG INPUT SM 331, 8 AI, 0/4 - 20MA HART, FOR ET200M WITH IM153-2, 6ES7331-7TF01-0AB0 ► Controller/PLC
1 X 20-POLE, FEATURES: FW UPDATE, HART SECONDARY VARIABLES, REDUNDANCY, LOCAL
DIAGNOSTIC BUFFER WITH TIMESTAMP
2x SIMATIC S7/PCS7, SM 322 DIGITAL OUTPUT MODULE, 16 DO, DC 24 V / 0,5A, CAPABLE OF ► Operator control &
6ES7322-8BH10-0AB0
monitoring
DIAGNOSTICS, WIRE BREAK DETECTION TO 0 AND 1 SIGNAL, 1 X 40-PIN, INTERFACE MODULE IM
153-X HF NECESSARY ► Process Automation
1x SIMATIC S7-300, FRONT CONNECTOR FOR SIGNAL MODULES WITH SCREW CONTACTS, 20-PIN 6ES7392-1AJ00-0AA0 ► Industrial
2x SIMATIC S7-300,FRONT CONNECTOR WITH SCREW CONTACTS, 40-PIN 6ES7392-1AM00-0AA0 Communication
1x SIMATIC, STAND.SECTIONAL RAIL WIDTH 35MM, LENGTH 483MM FOR 19 IN.CABINETS 6ES5710-8MA11 ► Sensor Technology
1x SIMATIC NET, CONN. CABLE 830-2 F. PROFIBUS, PREASSEMBLED CABLE WITH 2 SUB-D 6XV18302AH50 ► Drive Technology
1x SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6A, CROSSED TP CABLE 4X2 6XV18703RH60 ► CNC Software
1x SITOP PSU8200 20A STABILIZED POWER SUPPLY INPUT: 120-230 V AC 110-220 V DC OUTPUT: 6EP13363BA10
► PLM Software
24 V/20 A DC
► Important Notes
Note: The PCS7 AS RTX Box Package has to be ordered in combination with ET 200M for RTX. Oder number/Details see slide 93.

Page 92 Version 07/2016 Übersicht
Overview I Liste
List I IGraphic
Grafik I IKoffer
Cabinet DF FA S EUR&AFR SCE
ET 200M 6ES7153-2BA10-4AB1 for RTX Box (PROFIBUS) only in combination
with PCS 7 AS RTX Box 6ES7654-0UE23-0XS1 (see previous page)
1 x SIMATIC DP, ET 200M INTERFACE IM 153-2 HIGH FEATURE FOR MAX. 12 S7-300 MODULES, WITH 6ES7153-2BA10-0XB0 ► Industrial Controls
REDUNDANCY, TIME STAMPING FIT FOR ISOCHRONE MODE NEW FEATURES: 12 MODULES / STATION ► Engineering
SLAVE INITIATIVE FOR SWITCHES AND DRIVE ES EXTENDED DATA FOR HART SECON- DARY Software
VARIABLES OPERATON WITH 64PT MODULES EXTENDES TIMESTAMPS WITH 32 SIGNALS / SLOT +++
SEE COMPATIBILITY NOTES IN THE MANUAL +++
2 x SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 32DO, 24V DC, 0.5A, 1 X 40 PIN 6ES7322-1BL00-0AA0 ► Basic Automation
4 x SIMATIC S7-300, DIGITAL INPUT SM 321, GALVANICALLY ISOLATED, 16 DI, DC 24V, 1 X 20 PIN, 6ES7321-7BH01-0AB0 ► Controller/PLC
PROCESS INTERRUPT, DIAGNOSTICS, FIT FOR ISOCHRONE MODE ► Distributed I/Os
1 x SIMATIC S7-300, DIGITAL OUTPUT SM 322, OPTICALLY ISOLATED, 32DO, 24V DC, 0.5A, 1 X 40 PIN 6ES7322-1BL00-0AA0 ► Operator control &
1 x SIMATIC S7-300, ANALOG INPUT SM 331, GALVANICALLY ISOLATED, 8 AI, 14 BIT, 0.052MS/CHANNEL, 6ES7331-7HF01-0AB0 monitoring
CURRENT,
1 x SIMATIC S7-300, ANALOG OUTPUT SM 332, OPTICALLY ISOLATED, 8 AO, U/I; DIAGNOSTICS 6ES7332-5HF00-0AB0
► Industrial
5 x SIMATIC S7-300, FRONT CONNECTOR FOR SIGNAL MODULES WITH SCREW CONTACTS, 20-PIN 6ES7392-1AJ00-0AA0 Communication
4 x SIMATIC S7-300,FRONT CONNECTOR WITH SCREW CONTACTS, 40-PIN 6ES7392-1AM00-0AA0
1 x SIMATIC DP, RAIL FOR ET 200M 620 MM LONG FOR BUS MODULES FUNCTION: INSERT/REMOVE 6ES7195-1GG30-0XA0
6 x SIMATIC DP, BUS UNIT FOR ET200M F. THE INTEGR.OF TWO 40 MM WIDE I/O SUBMODULES FOR 6ES7195-7HB00-0XA0
INSERT/REMOVE ► CNC Software
1 x SIMATIC DP, BUS UNIT FOR ET200M F. THE INTEGR. OF 1 PS A.1 IM153 FUNCTION: INSERT/REMOVE- 6ES7195-7HA00-0XA0 ► PLM Software
MODULE WHILE OPERATING MODE RUN INCL. COVER FOR BUS UNIT
► Important Notes
Note: The PCS7 AS RTX Box Package has to be ordered in combination with ET 200M for RTX. Oder number/Details see slide 92.

Industrial Communication
• Overview
• SINEMA Network Monitoring Software
• CP343-1 Advanced
• Switch X208
• Security Switch
• IWLAN
• FASTCONNECT Accessories Kit
• Development Kit

SINEMA Network Monitoring Software V13
6 X SINEMA SERVER BASIC-50 V13 6GK1781-1BA13-0AA0 ► Industrial Controls

Totally
Integrated ► Engineering
SINEMA SERVER 50 V13 DELIVERED ON DVD MONITORING FOR INDUSTRIAL NETWORKS INCL Automation Software
PROFINET AUTOMATIC INVENTORY DETERMINATION OF TOPOLOGY CONTINUOUS DIAGNOSIS PORTAL
REPORTING, STATISTICS, ALARMS ADAPTABLE DEVICE PROFILES CAPABLE OF BEEING INTEGR
IN HMI WEBSERVER-WEBCLIENT ARCHITECT. LICENSE TYPE SINGLE MONITORABLE IP UNITS 50 Check HW Compatibility
WINDOWS 7 SP1 64BIT for TIA Portal  ► Controller/PLC
monitoring
► Industrial
Communication
► CNC Software
► PLM Software
System requirements: 64 BIT: WINDOWS 7 Professional, Ultimate SP1
► Important Notes
Technical note: Authorization on USB-Stick

SIMATIC CP343-1 Advanced
1 x SIMATIC CP 343-1 Advanced 6GK7343-1GX31-0XE0 ► Industrial Controls

SIMATIC NET CP 343-1 ADVANCED; FOR CONNECTING SIMATIC S7-300 CPU TO IND. ETHERNET; PROFINET IO ► Engineering
CONTROLLER AND/OR IO-DEVICE; RT AND IRT MRP, PROFINET CBA; TCP/IP; ISO,UDP,S7-COM,S5-KOMP. Software
COM., (SEND/RECEIVE) W. FETCH/WRITE WITH AND WITHOUT RFC 1006, MULTICAST DIAGNOSIS EXTENSION, ► SIMIT Simulation
SNMP, DHCP, FTP CLIENT/SERVER, E-MAIL, GIGABIT-SS1X RJ45 (10/100/1000) PROFINET-SS 2X
RJ45(10/100MBIT) PROFINET CBA; SECURITY (FIREWALL/VPN); PROFIENERGY
► Controller/PLC

monitoring
6XV1870-3RH60 6GK1950-0BB00
Communication
► CNC Software
► PLM Software
► Important Notes
Order number: 6GK1950-0AA07

Switch Technologies – Scalance X208 / SIMATIC NET
1 x SCALANCE X208 6GK5208-0BA10-2AA3 ► Industrial Controls

SIMATIC NET, SCALANCE X208, MANAGED IE SWITCH, 8 X 10/100MBIT/S RJ45 PORTS, LED ► Engineering
DIAGNOSTICS, ERROR SIGNAL CONTACT WITH SET BUTTON, REDUNDANT POWER SUPPLY, Software
PROFINET-IO DEVICE, NETWORK MANAGEMENT, INTEGRATED REDUNDANCY MANAGER, ► SIMIT Simulation
INCL. ELECTRONIC MANUAL ON CD
► Controller/PLC
1 x SIMATIC NET, C-PLUG 6GK1900-0AB00
SIMATIC NET, C- PLUG REPLACEABLE , FOR SIMPLE DEVICE EXCHANGE IN CASE OF FAILURE, ► Distributed I/Os
FOR STORAGE OF CONFIGURATION OR USER DATA, APPLICATION IN SIMATIC NET PRODUCTS ► Operator control &
WITH C-PLUG SLOT monitoring
6XV1870-3RH60 6GK1950-0BB00
Communication
► CNC Software
► PLM Software
► Important Notes
for vocational
Technical note: None available World Cup
Industrial
Order number: 6GK1950-0BB02 Control 

SIMATIC NET Industrial Security Switch Technologies – SCALANCE S623
2 x SIMATIC NET SCALANCE S 623 6GK5623-0BA10-2AA3 ► Industrial Controls

SCALANCE S 623 MODULE FOR PROTECTION OF UNITS AND NETWORKS IN AUTOMATION TECHNOLOGY AND ► Engineering
FOR PROTECTION OF INDUSTRIAL COMMUNICATION VIA VPN AND FIREWALL; ADDITIONAL DMZ-PORT FOR Software
CONNECTING AN ADDITIONAL NETWORK ADDITIONAL FUNCTIONS: ADDRESS CONVERSION
1 x SOFTNET SECURITY CLIENT V5 6GK1704-1VW05-0AA0
SIMATIC NET INDUSTR. ETHERNET SOFTNET SECURITY CLIENT V5 SW FOR CONFIGURING SAFE IP BASED VPN- ► Basic Automation
CONNECTIONS FROM PC/PG TO NETWORK SEGMENTS, WHICH ARE FUSED BY SCALANCE S, SCALANCE M, SINGLE ► Controller/PLC
LICENSE F.1 INSTALLATION R-SW, SW + ELECTR. MAN ON CD SW 2-LANGUAGES (G,E); MAN 5-LANGUAGES (G, E, F, I, S)
FOR WINDOWS 7 ULTIMATE, PROFESSIONAL (32/64 BIT) ► Distributed I/Os

2 x SIMATIC NET, C-PLUG 6GK1900-0AB00 monitoring
SIMATIC NET, C- PLUG REPLACEABLE , FOR SIMPLE DEVICE EXCHANGE IN CASE OF FAILURE,
FOR STORAGE OF CONFIGURATION OR USER DATA
Communication
6XV1870-3RH60 6GK1950-0BB00
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD Trainer Package: ► Sensor Technology
► CNC Software
► PLM Software
► Important Notes

SIMATIC NET – IWLAN
1 x 6GK5774-1FX00-0AA0 (ROW version) or 6GK5774-1FX00-0AB0 (USA version) ► Industrial Controls

IWLAN ACCESS POINT, SCALANCE W774-1 RJ45, 1 RADIO, 2 R-SMA ANT. CONNECT., IFEATURES ONLY WITHT KEY-PLUG, IEEE ► Engineering
802.11A/B/G/H/N, 2.4/5GHZ, GROSS DATA RATE 300 MBIT/S, 2 X RJ45 (MAX. 100 MBIT/S), POE INTEGRATED 2-PORT-SWITCH, Software
2 x 6GK5734-1FX00-0AA0 (ROW version) or 6GK5734-1FX00-0AB0 (USA version)
IWLAN CLIENT, SCALANCE W734-1 RJ45, 1 RADIO, 2 R-SMA ANT. CONNECT., IFEATURES ONLY WITH KEY-PLUG, IEEE
802.11A/B/G/H/N, 2.4/5GHZ, GROSS DATA RATE 300 MBIT/S, 2 X RJ45 (MAX. 100 MBIT/S), POE INTEGRATED 2-PORT-SWITCH, ► Basic Automation
2X24V DC, IP20 ► Controller/PLC
6 x 6GK5795-4MA00-0AA3
IWLAN ANTENNA ANT 795-4MA WITH OMNIDIRECTIONAL CHARACTERISTIC, RADIAL ROTAT., WITH ADDITIONAL JOINT, ANTENNA ► Distributed I/Os
GAIN: 3/5DBI, INCL. RSMA CONNECTOR, IP30 (-20-+60DGR C), 2.4/5 GHZ; DIRECT MOUNTING TO SCALANCE W WITH RSMA ► Operator control &
CONNECTION TECHNOLOGY, SCOPE OF DELIVERY: 1X ANT795-4MA COMPACT INSTRUCTION ON PAPER GERMAN/ENGLISH monitoring
1 x 6GK5907-8PA00 ► Process Automation
KEY-PLUG W780, REPLACEABLE MEDIUM FOR ACTIVATING IFEATURES FOR SCALANCE W IN ACCESS POINT AND CLIENT MODE
AND FOR EASY REPLACEMENT OF DEVICE IN CASE OF FAILURE, AND FOR STORAGE OF CONFIGURATION DATA ► Industrial
Communication
2 x 6GK5907-4PA00
KEY-PLUG W740, REPLACEABLE MEDIUM FOR ACTIVATING ► Sensor Technology
Recommended accessories:
IFEATURES FOR SCALANCE W IN CLIENT MODE……. ► Drive Technology
6GK1950-0BB00
Trainer Package: FASTCONNECT connection technology
► CNC Software
► PLM Software
► Important Notes
Order number: 6GK1950-0BB14 (ROW version) 6GK1950-0BB15 (USA version)

FASTCONNECT Accessories Kit
1 X 6GK1901-1GA00 FASTCONNECT STRIPPING TOOL ► Industrial Controls

► Engineering
2 X 6GK1901-1BB10-2AB0 SIMATIC NET IE FC RJ45 PLUG 180 2X2, RJ45 PLUG CONNECTOR (10/100MBIT/S) WITH RUGGED METAL
Software
HOUSING AND FC CONNECTING METHOD FOR IE FC CABLE 2X2, 180 DGR CABLE OUTLET 1 PACK = 10 PCS
4 X 6GK1901-1BB20-2AA0 SIMATIC NET IE FC RJ45 PLUG 90 2X2, RJ45 PLUG CONNECTOR (10/100MBIT/S) WITH RUGGED METAL
HOUSING AND FC CONNECTING METHOD FOR IE FC CABLE 2X2 90 DGR CABLE OUTLET 1 PACK = 1 PCS
► Controller/PLC
1 X 6GK1901-0DB20-6AA8 SIMATIC NET IE FC M12 PLUG PRO M12 PLUG CONNECTOR WITH RUGGED METAL HOUSING AND FC
CONNECTING METHOD, WITH AXIAL CABLE OUTLET (D CODED)1 PACKAGE = 8 PCS FOR SCALANCE X208 PRO
AND ET 200 PRO PN ► Operator control &
monitoring
1 X 6GK1907-0DC10-6AA3 M12 CABLE CONN. PRO - SOCKET FOR CONNECTION OF SCALANCE W-700/X208PRO FOR 24V DC
VOLTAGE SUPPLY, 4-POLE, A-CODED, WITH MOUNTING INSTRUCTION, 3 PCS
► Industrial
1 X 50 M - 6XV1870-2B FLEXIBLE CABLE, GP 2X2 TP INSTALLATION CABLE WITH FLEXIBLE STRAND, PROFINET TYP B, 4WIRE Communication
2 X 6XV1870-3RH60 SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6, CROSSED TP CABLE 4X2, ► Sensor Technology
PREASSEMBLED WITH 2 RJ45 CONNECTORS, LENGTH 6 M ► Drive Technology
► CNC Software
► PLM Software
► Important Notes

Development Kit – PROFINET & PROFISAFE
1 EK-ERTEC 200P PN IO EVALUATION KIT FOR PN IO, 6ES7195-3BE00-0YA0 ► Industrial Controls

DEVICE BASED ON ERTEC 200P EVALUATION BOARD ► Engineering
EB 200P, TEST-APPLICATION SW, DOCU Software
1 PROFINET DRIVER FOR CONTROLLER DEVELOPMENT 6ES7195-3AA00-0YA0 ► Basic Automation
PACKAGE FOR PROFINET IO CONTROLLER, ON CD, ► Controller/PLC
SOURCE CODE WITH EXEMPLARY IMPLEMENTATION
ON WINDOWS ► Distributed I/Os

1 PROFISAFE-STARTERKIT V3.4 (FOR V1-MODE AND 6ES7195-3BF02-0YA0 monitoring
V2-MODE PROFISAFE-DEVICES) ► Process Automation
► Industrial
1 SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD 6XV1870-3RH60 Communication
RJ45/RJ45, CAT 6A, CROSSED TP CABLE 4X2,
► CNC Software
► PLM Software
► Important Notes
Technical note: Support by ComDeC - Communication, Development & Certification
Order number: 6ES7195-3BE00-4AB1
 ComDeC
Selection of development environment
Overview of the PROFINET stack
1 TCP/IP (IEEE802.3) ► Engineering

IT applications PROFINET applications • Parameter assignment and
Software
e. g. ► SIMIT Simulation
• HTTP configuration
Configuration ► Basic Automation
• SNMP
Process data • Diagnostic data
• DHCP... diagnostics ► Controller/PLC
• Send authorization for user data ► Distributed I/Os
channel ► Operator control &
monitoring
TCP/UDP Real-time 2 Real-time (RT)
Real-time
• Cyclic high-performance transfer (up to
Non-
► Industrial
1 ms cycle time) of user data Communication
IP • Event-dependent messages/warnings ► Sensor Technology
3 Isochronous real-time (IRT)
► CNC Software
• Cyclic synchronous transfer of user ► PLM Software
1 Ethernet 2 RT 3 IRT data ► Important Notes
• Hardware support from ERTEC
• Jitter < 1 μs

Development environment
Evaluation Kit for ERTEC 200P
High speed with ERTEC 200P ► Engineering
Software
• Support of the performance upgrade of PROFINET in accordance
with specification V2.3 ► SIMIT Simulation
 Cycle times up to 31.25 µs can be reached ► Basic Automation
(Eval Kit V4.0 allows 250 µs, FW update in work) ► Controller/PLC
• Isochronous connection of applications to PROFINET ► Distributed I/Os

• ARM 926 with 250 MHz for demanding applications monitoring
► Industrial
Communication
Quick start to development with Evaluation Kit
• Complete PROFINET stack in source code ► Drive Technology
• Evaluation board for ERTEC 200P (EB 200P) ► CNC Software
• Application examples based on ERTEC 200P ► PLM Software

► Important Notes
• License-free development tools and real-time operating
system eCos
• Free network analyzer
ERTEC 200P

PROFIsafe Starter Kit
Advantages of the Development Kit ► Engineering
Software
• The Development Kit supports the development of a PROFIsafe
field device based on PROFINET ► SIMIT Simulation
• The PROFIsafe Starter Kit V3.4 complies with version 2.4 of the
► Controller/PLC
PROFIsafe profile, specified in IEC 61784-3-3.
• Meets a range of user requirements, such as multiple instance ► Operator control &
capability and variable process data length during runtime monitoring
► Industrial
Communication
Contents of the software
• Current PROFIsafe specification • iPar server function block ► Drive Technology
(software and instructions)
• PROFIsafe driver software (PSD) ► CNC Software
with PROFIsafe certificate • Tool calling interface ► PLM Software

functionality (example and ► Important Notes
• CRC calculation tools instructions)
• Sample application for DK-
PROFIsafe Starter Kit ERTEC 200 PN IO

Overview of the PROFINET Driver for Controllers
Overview of key features
► Engineering
Software
• Support of PROFINET with RT (cycle time up to 1 ms)
when using a realtime operating system ► SIMIT Simulation
• Example implementation for Windows
► Controller/PLC
(cycle time of up to 32 ms)
• Example implementation for SIMATIC IPC hardware
• XML interface for configuration monitoring
► Industrial
Communication
Scope of supply
Product CD ► Drive Technology
• Source code of the PROFINET Driver for controllers on CD ► CNC Software
• Documentation ► PLM Software

► Important Notes
Customer Support Portal
• HSP for TIA Portal
PROFINET Driver for controllers • Further tools for development tools (amongst others trace

Sensor Technology
• Overview
• SIMATIC MV440 HR Optical Reader
• SIMATIC RF200 RFID System
• SIMATIC RF300 RFID System
• SIWAREX Weighing systems

SIMATIC MV440 HR Optical Reader
1 X SIMATIC MV440 HR OPTICAL READER RESOLUTION: 1024 X 768 PIXEL; FOR 1D/2D CODES AND OCR 6GF3440-1GE10
1 X TEXT-GENIUS PLUS; READING OF 1D BAR CODES AND 2D MATRIX CODES, TEXT RECOGNITION; ► Engineering
OCR LICENSE FOR MV440 CODE READING SYSTEMS; SINGLE LICENSE 6GF3400-1SL01 Software
1 X PAT-GENIUS FORM RECOGNITION, OBJECT RECOGNITION LICENSE FOR MV440 CODE READER UNITS 6GF3400-0SL03 ► SIMIT Simulation
1 X MV440 MOUNTING PLATE READER VERY STURDY (4MM MATERIAL) 6GF3440-8CA
1 X POWER-IO-RS232 CABLE 10M FOR MV 400 UNITS LENGTH: 10M 6GF3440-8BA2
► Controller/PLC
1 X MINI LENS 16 MM, 1:1.4 PENTAX C1614-M(KP) 6GF9001-1BF01
1 X D65 LENS PROTECTION METAL-GLASS IP67 DEGREE OF PROTECTION FOR MV440 DEVICES 6GF3440-8AC11
1 X INTERMEDIATE RING SET 0.5/1/1MM 6GF9001-1BU01 ► Operator control &
monitoring
1 X BUILT-IN RING LIGHT RED FOR ALL MV440 DEVICES 6GF3440-8DA11
1 X BUILT-IN RING LIGHT WHITE FOR ALL MV440 DEVICES 6GF3440-8DA21
1 X IE CONNECTING CABLE M12-180/IE FC RJ45 PLUG-145; LENGTH 10.0 M 6XV1871-5TN10 ► Industrial
Communication
Recommended accessories: ► Sensor Technology
6XV1870-3RH60 6GK1950-0BB00 ► Drive Technology

SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD Trainer Package: FASTCONNECT connection technology
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED ► CNC Software
► PLM Software
► Important Notes
Technical note: Parameterization with web-based user interface with browser (as of IE5.5), JAVA-VM (MS, SUN)
Order number: 6GF3400-0TP03

SIMATIC MV440 HR Optical Reader
► Engineering
Software
1x MV440 1x Lens 12mm BUILT-IN RING LIGHT 1x TEXT-GENIUS PLUS 1x PAT-GENIUS
► Controller/PLC
Optical Reader 6GF9001-1BL01 1x 6GF3440-8DA11 Red 6GF3400-1SL01 6GF3400-0SL03
6GF3440-1GE10 1x 6GF3440-8DA21 White ► Distributed I/Os

monitoring
► Industrial
Communication
1x IE CABLE ► Sensor Technology

1x MOUNTING PLATE 1x INTERMEDIATE RING 1x PROTECTION HOUSING 6XV1871-5TN10 ► Drive Technology
6GF3440-8CA 6GF9001-1BU01 6GF3440-8AC11
► CNC Software
► PLM Software
► Important Notes
Recommended accessories:
6XV1870-3RH60 6GK1950-0BB00
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD Trainer Package: FASTCONNECT connection technology 1x POWER CABLE
RJ45/RJ45, CROSSED TP CABLE 4X2, PREASSEMBLED 6GF3440-8BA2

SIMATIC RFID – RF200
2 SIMATIC RF200 READER RF240R; RS422-INTERFACE (3964R); WITH INTEGRATED ANTENNA 6GT2821-4AC10 ► Industrial Controls
1 RFID COMMUNICATION MODULE RF180C FOR PN; 2 READERS CONNECTABLE; WITHOUT CONNECTING 6GT2002-0JD00 ► Engineering
BLOCK FOR PROFINET Software
1 RFID PROFINET- / ETHERNET- CONNECTING BLOCK PUSH-PULL RJ45 FOR RF180C, RF182C 6GT2002-2JD00 ► SIMIT Simulation
1 POWER PLUG PRO, 5-POLE PUSH PULL POWER PLUG FOR ON-SITE MOUNTING (PACKAGING UNIT: 1 PLUG) 6GK1907-0AB10-6AA0
1 IE FC RJ45 PLUG PRO; IP65; FAST CONNECT; IE; RJ45 PUSH PULL PLUG FOR ON-SITE MOUNTING TO IE FC 6GK1901-1BB20-6AA0
TP CABLE 2X2; (PACKAGING UNIT 1 PLUG) ► Controller/PLC
2 SIMATIC RF, MV CONNECT. CABLE, PREASSEMBLED, BETWEEN ASM 456, RF160C, RF170C, RF18XC AND 6GT2891-4FH20 ► Distributed I/Os
READER OR EXTENSION CABLE FOR ASM 456, RF160C, RF170C, RF18XC WITH RF, MV, MOBY PUR, CMG,
LENGTH 2 M ► Operator control &
1 RFID SYSTEMS SOFTWARE & DOCUMENTATION ON DVD, FB/FC FOR SIMATIC, RFID PC LIBRARIES, RFID 6GT2080-2AA20 monitoring
TOOLS ► Process Automation
5 MOBY D / RF300 ISO / RF200 TRANSPONDER MDS D400 ISO-CARD, 2000 BYTE (NETTO) 6GT2600-4AD00
► Industrial
5 MOBY D / RF300 ISO MOBILE DATA STORAGE MDS D460, ACCORDING TO ISO 15693; 2000 BYTE FRAM; 6GT2600-4AB00 Communication
5 MOBY D / RF300 ISO SPACER FOR MDS D160 / MDS D460; DIAMETER 20 MM; HEIGHT 15 MM 6GT2690-0AG00
5 RF200 / RF300 ISO TRANSPONDER MDS D423; TRANSPONDER IN AND ON METAL ACCORDING;2000 BYTE 6GT2600-4AA00
FRAM ► Drive Technology
► CNC Software
► PLM Software
► Important Notes
Order number: 6GT2096-3AA00-0AA0

► Engineering
Software
2 x RF200 READER 1 x COMMUNICATION 1 x PROFINET/ETHERNET 1 x POWER PLUG PRO 1 x PUSH PULL PLUG ► Controller/PLC
RF240R MODULE RF180C CONNECTING BLOCK

monitoring
► Industrial
Communication
5 x TRANSPONDER 5 x MOBILER 5 x SPACER 5 x TRANSPONDER 2 x Terminal Cable
MDS D400 ISO-CARD DATA STORAGE
► CNC Software
► PLM Software
► Important Notes
1x RFID-System SW
& documentation

1 RFID COMMUNICATION MODULE RF180C FOR PROFINET; 2 READERS CONNECTABLE 6GT2002-0JD00 ► Industrial Controls
1 RFID PROFINET-/ETHERNET- CONNECTING BLOCK 6GT2002-2JD00 ► Engineering

Software
2 RF300/600 CONN. CABLE PREASSEMBLED, LENGTH: 2 M 6GT2891-4FH20 ► SIMIT Simulation
1 RFID SYSTEMS SOFTWARE PACKAGE AND DOCUMENTATION ON CD 6GT2080-2AA20 ► Basic Automation
1 RF300 READER RF340R (RF300+ISO15693) WITH RS422 AND INTEGRATED ANTENNA 6GT2801-2AB10 ► Controller/PLC
1 6GK1907-0AB10-6AA0 ► Distributed I/Os

POWER PLUG PRO, 5-POLE PUSH PULL
1 RF300 READER RF310R (RF300+ISO15693) WITH RS422 AND INTEGRATED ANTENNA 6GT2801-1AB10 monitoring
5 TRANSPONDER RF340T 8 KBYTE FRAM 6GT2800-4BB00 ► Process Automation
10 TRANSPONDER RF360T EPOXY-CARD, 8 KBYTE FRAM 6GT2800-4AC00 ► Industrial

Communication
20 MOBY D / RF300 ISO MOBILE DATA MEMORY MDS D124 , 112 BYTE EEPROM 6GT2600-0AC10
► CNC Software
► PLM Software
► Important Notes
Order number: 6GT2096-1AA00-0AA0

► Engineering
Software
1x Power Supply ► Basic Automation

SIMATIC
1x Software and Cable for RF180C ► Controller/PLC
RF180C
documentation ► Distributed I/Os
SIMATIC
1x PROFINET
RF180C Communication monitoring
Module RF180C with RJ45
Connector Terminal Block 2x Terminal Cable between ► Process Automation
Tank monitoring by RFID Nameplates, documentation of Reader RF340R and
in IP67 ► Industrial
process data Connect Module RF180C Communication
► CNC Software
► PLM Software
► Important Notes
1x SIMATIC RF310R 1x SIMATIC RF340R 5x SIMATIC RF340T 10x SIMATIC RF360T 20x MDS D124
Reader 55x75x30 Reader 75x75x41 Transponder Transponder Mobile data memory
8kByte Memory 8kByte Memory 112 Byte EEPROM

SIMATIC SIWAREX Weighing Systems
1 x SIWAREX FTA ► Industrial Controls

- Project engineering package FTA ► Engineering
- Connecting cable (RS232C) Software
- Documentation on CD ► SIMIT Simulation
1 x SIWAREX U ► Basic Automation
- Project engineering package U
► Controller/PLC
- Connecting cable (RS232C)
- Documentation on CD ► Distributed I/Os
Load cell series BB SIWAREX U SIWAREX FTA ► Operator control &
1 x Load cell series BB, nominal load 10kg
monitoring
1 x base plate with overload protection
1 x Elastomer bearing
► Industrial
1 x License agreement Communication
► CNC Software
► PLM Software
System requirements: None
► Important Notes
Order number: 7MH4901-0AA10

Drive Technology
• Overview
• SINAMICS G120 Standard drive 230V 400V
• SINAMICS S120 Servo drive 230V 400V
• SIMOTION D410 Add-on for S120

SINAMICS G120 standard drive 1 AC 230V network
Overview
Software ► Industrial Controls

Startdrive/STARTER ► Engineering
Circuit breaker Software
G120-Trainer Package 1AC 230V – 0.55kW PROFINET ► SIMIT Simulation
PC converter connection kit ► Controller/PLC
Control Unit
PROFINET CU250S-2 PN Asynchronous motor ► Operator control &
Power module i.e.. 1LE1 monitoring
with OPERATOR PM240-2 – 0.55kW With power: 0.55kW
PANEL (IOP) ► Process Automation
without EMV filter
► Industrial
Communication
S7 controller Power line
Not part of the package
► CNC Software
► Important Notes
for vocational
Technical note: See next slides World Cup
Industrial
Order number: 6SL3200-3AX00-0UL1 Control 
 Download STARTER  Download Startdrive

1 SINAMICS G120 POWER MODULE PM240-2 6SL3210-1PB13-8UL0 ► Industrial Controls

WITHOUT FILTER WITH BUILT IN BRAKING CHOPPER ► Engineering
1/3AC200-240V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 0,55KW FOR 200% 3S,150% 57S,100% Software
240S AMBIENT TEMP -10 TO +50 DEG C OUTPUT LOW OVERLOAD: 0,75KW FOR 150% 3S,110%
57S,100% 240S AMBIENT TEMP -10 TO +40 DEG C 196 X 73 X 165 (HXWXD), FSA PROTECTION IP20
WITHOUT CONTROL UNIT AND OPERATOR PANEL APPROVED FOR CU FIRMWARE VERSION V4.6 ► Basic Automation
1 SINAMICS G120 CONTROL UNIT CU250S-2 PN INTEGRATED PROFINET SUPPORT OF VECTOR 6SL3246-0BA22-1FA0 ► Controller/PLC
CONTROL, EASY POSITIONING EPOS VIA EXTENDED FUNCTION LICENSE ► Distributed I/Os
4 CONFIGURABLE DI/DO, 6 DI (3 F-DI), 5 DI, 3 DO (1 F-DO), 2 AI,
2 AO SAFETY INTEGRATED STO, SBC, SS1 FURTHER SAFETY FUNCTIONS VIA monitoring
”EXTENDED SAFETY” LICENSE, ENCODER: D-CLIQ + HTL/TTL/SSI, RESOLVER/HTL VIA TERMINAL
DEGREE OF PROTECTION IP20 USB AND SD/MMC INTERFACE ► Process Automation
► Industrial
1 SINAMICS SD-CARD 512 MB EMPTY 6SL3054-4AG00-2AA0 Communication
1 SINAMICS G120 SHIELD CONNECTION KIT 4 INCLUDES SCREENING PLATE AND FIXING ELEMENTS ► Sensor Technology
FOR CONTROL UNITS CU250S-2 VERSION: USS, CAN, DP, PN
1 SINAMICS G120 INTELLIGENT OPERATOR PANEL IOP OPTIONAL OPERATOR PANEL FOR 6SL3255-0AA00-4JA1 ► CNC Software
SINAMICS G120, G120P, G110M, G110D, G120D, G120C, S110, ET200S FC, ET200PRO FC
► PLM Software
1 SINAMICS G120 PC CONVERTER CONNECTION KIT 2 3M USB CABLE FOR CONTROL UNITS 6SL3255-0AA00-2CA0
► Important Notes
CU230P-2, CU240B-2, CU240E-2, CU250S-2, G110M AND SINAMICS G120C
1 SINAMICS LICENSE SAFETY INTEGRATED EXTENDED FUNCTIONS FOR MEMORY CARD 6SL3074-0AA10-0AA0
1 SINAMICS G120 LICENSE EXTENDED FUNCTIONS FOR MEMORY CARD OF 6SL3074-7AA04-0AA0
CU250S-2 VECTOR FOR FUNCTIONALITY: EPOS

Optional motors
SIMOTICS GP Low-voltage motor without encoder 1LE1003-0DB22-2AB4 ► Industrial Controls

SIMOTICS GP MOTOR TYPE: 1AV3082B LOW-VOLTAGE MOTOR, IEC SQUIRREL-CAGE, SELF-VENTIL., ► Engineering
IP55 TEMP. CL. 155(F) ACC.TO 130(B) ALUMINUM HOUSING PREMIUM EFFICIENCY, 4POLE * FS80M * Software
0.55KW (50HZ) 0.63KW (60HZ) 3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY IM B 3, MOTOR PROTECTION, ► SIMIT Simulation
1 PTC THERMISTOR FOR SHUTDOWN TERMINAL BOX AT TOP
► Controller/PLC
SIMOTICS GP Low-voltage motor with HTL encoder 1LE1003-0DB22-2AB4-Z G01
Z= G01 with HTL encoder SIMOTICS GP MOTOR TYPE: 1AV3082B LOW-VOLTAGE MOTOR, IEC SQUIRREL- ► Distributed I/Os
CAGE, SELF-VENTIL., IP55 TEMP. CL. 155(F) ACC.TO 130(B) ALUMINUM HOUSING PREMIUM ► Operator control &
EFFICIENCY, 4POLE * FS80M * 0.55KW (50HZ) 0.63KW (60HZ) 3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY monitoring
IM B 3, MOTOR PROTECTION WITH 1 PTC THERMISTOR FOR SHUTDOWN G01=MOUNTING ROTARY ► Process Automation
PULSE ENCODER 1XP8012-10 (HTL) 1024 PULSES, WITH EXTERNAL FAN (F70) 1XP8032-10 IS USED
► Industrial
Communication
SIMOTICS GP Low-voltage motor with TTL encoder ► Sensor Technology

1LE1003-0DB22-2AB4-Z G02
SIMOTICS GP MOTOR TYPE: 1AV3082B LOW-VOLTAGE MOTOR, IEC SQUIRREL-CAGE, SELF-VENTIL., ► Drive Technology
IP55 TEMP. CL. 155(F) ACC.TO 130(B) ALUMINUM HOUSING PREMIUM EFFICIENCY, 4POLE * FS80M * ► CNC Software
0.55KW (50HZ) 0.63KW (60HZ) 3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY IM B 3, MOTOR PROTECTION
WITH 1 PTC THERMISTOR FOR SHUTDOWN TERMINAL BOX AT TOP G02=MOUNTING A ROTARY PULSE ► PLM Software
ENCODER 1XP8012-20 (TTL) 1024 PULSES, WITH EXTERNAL FAN (F70) 1XP8032-20 IS USED ► Important Notes
Note: When selecting motors, please contact your local Siemens technical sales department

Optional hardware
► Engineering
Software
CIRCUIT BREAKER 5SY6110-7
230/400V 6KA, 1POLE, C, 10A, T=70mm ► Basic Automation
► Controller/PLC

monitoring
► Industrial
Communication
6XV1870-3RH60 6GK1950-0BB00 ► CNC Software
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, Trainer Package: FASTCONNECT
CROSSED TP CABLE 4X2, PREASSEMBLED WITH 2 RJ45 connection technology ► PLM Software
CONNECTORS, LENGTH 6 M
► Important Notes
Matching: Trainer package SIRIUS Industrial Controls 3TK3388-0TP00

Optional software
STARTER 6SL3072-0AA00-0AG0 ► Industrial Controls

COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION V4.4 SP1 ► Engineering
Software
STARTDRIVE 6SL3072-4AD02-0XG0 ► SIMIT Simulation
ENGINEERING AND COMMISSIONG TOOL FOR SINAMICS VERSION V13 SP1
► Controller/PLC
SIZER 6SL3070-0AA00-0AG0
CONFIGURATION TOOL FOR SIEMENS DRIVES ► Distributed I/Os

DRIVE ES BASIC V5.5 SP5 6SW1700-5JA00-5AA0 monitoring
ENGINEERING-SW FOR DRIVES ► Process Automation
5-LANGUAGE DVD WITH ELECTRONIC DOCUMENTATION, FOR STEP 7 V5.5 SP2
► Industrial
FLOATING LICENSE Communication
DRIVE ES SIMATIC V5.5 SP1 6SW1700-5JC00-5AA0
DRIVE ES SIMATIC V5.5 SP1 BLOCK LIBRARIES FOR SIMATIC S7 ► Drive Technology
FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTRONIC ► CNC Software
DOCUMENTATION ► PLM Software
► Important Notes
Matching: Trainer Package SIRIUS Industrial Controls 3TK3388-0TP00

Overview
Software ► Industrial Controls

Startdrive/STARTER ► Engineering
Circuit breaker Software
G120-Trainer Package 3AC 400V – 0.55kW PROFINET ► SIMIT Simulation
PC CONVERTER CONNECTION KIT ► Controller/PLC
Control Unit
PROFINET CU250S-2 PN Asynchronous motor ► Operator control &
Power module i.e.. 1LE1 monitoring
With OPERATOR PM240-2 – 0.55kW With power: 0.55kW
PANEL (IOP) ► Process Automation
without EMV filter
► Industrial
Communication
S7 controller Power line
Not part of the package
► CNC Software
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 ► Important Notes
Order number: 6SL3200-3AX00-0UL2

1 SINAMICS G120 POWER MODULE PM240-2 UNFILTERED WITH INTEGRATED BRAKING CHOPPER 6SL3210-1PE12-3UL1 ► Industrial Controls
3AC380-480V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 0.55KW FOR 200% 3S,150% 57S,100% 240S ► Engineering
AMBIENT TEMP. -10 TO +50 DEG C OUTPUT LOW OVERLOAD: 0.75KW AT 150% 3S,110% 57S,100% Software
240S AMBIENT TEMP. -10 TO +40 DEG C 196 X 73 X 165 (HXWXD), FSA PROTECTION IP20 WITHOUT
CONTROL UNIT AND OPERATOR PANEL APPROVED FOR CU FIRMWARE VERSION V4.6
1 SINAMICS G120 CONTROL UNIT CU250S-2 PN INTEGRATED PROFINET SUPPORT OF VECTOR 6SL3246-0BA22-1FA0
CONTROL, BASIC POSITIONER EPOS VIA EXTENDED FUNCTION LICENSE 4 CONFIGURABLE DI/DO, 6 ► Controller/PLC
DI (3 F-DI), 5 DI, 3 DO (1 F-DO), 2 AI, ► Distributed I/Os
2 AO SAFETY INTEGRATED STO, SBC, SS1 FURTHER SAFETY FUNCTIONS VIA “EXTENDED SAFETY”
LICENSE ENCODER: D-CLIQ + HTL/TTL/SSI, RESOLVER/HTL VIA TERMINAL DEGREE OF PROTECTION monitoring
IP20 USB AND SD/MMC INTERFACE
1 SINAMICS SD CARD 512 MB EMPTY 6SL3054-4AG00-2AA0
► Industrial
1 SINAMICS G120 SHIELD CONNECTION KIT 4 INCLUDES SCREENING PLATE AND FIXING ELEMENTS 6SL3264-1EA00-0LA0 Communication
FOR CONTROL UNITS CU250S-2 VERSION: USS, CAN, DP, PN ► Sensor Technology
1 SINAMICS G120 INTELLIGENT OPERATOR PANEL IOP OPTIONAL OPERATOR PANEL FOR 6SL3255-0AA00-4JA1 ► Drive Technology
SINAMICS G120, G120P, G110M, G110D, G120D, G120C, S110, ET200S FC, ET200PRO FC ► CNC Software
1 SINAMICS G120 PC CONVERTER CONNECTION KIT 2 3M USB CABLE FOR CONTROL UNITS 6SL3255-0AA00-2CA0 ► PLM Software
CU230P-2, CU240B-2, CU240E-2, CU250S-2, G110M AND SINAMICS G120C
► Important Notes
1 SINAMICS LICENSE SAFETY INTEGRATED EXTENDED FUNCTIONS FOR MEMORY CARD 6SL3074-0AA10-0AA0
1 SINAMICS G120 LICENSE EXTENDED FUNCTIONS FOR MEMORY CARD OF 6SL3074-7AA04-0AA0
CU250S-2 VECTOR FOR FUNCTIONALITY: EPOS

Optional motors
SIMOTICS GP Low-voltage motor without encoder 1LE1003-0DB22-2AB4 ► Industrial Controls

SIMOTICS GP MOTOR TYPE: 1AV3082B LOW-VOLTAGE MOTOR, IEC SQUIRREL-CAGE, SELF-VENTIL., ► Engineering
IP55 TEMP. CL. 155(F) ACC.TO 130(B) ALUMINUM HOUSING PREMIUM EFFICIENCY, 4POLE * FS80M * Software
0.55KW (50HZ) 0.63KW (60HZ) 3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY IM B 3, MOTOR PROTECTION ► SIMIT Simulation
WITH 1 PTC THERMISTOR FOR SHUTDOWN TERMINAL BOX AT TOP
► Controller/PLC
SIMOTICS GP Low-voltage motor with HTL encoder 1LE1003-0DB22-2AB4-Z G01
Z= G01 with HTL encoder SIMOTICS GP MOTOR TYPE: 1AV3082B LOW-VOLTAGE MOTOR, IEC SQUIRREL- ► Distributed I/Os
CAGE, SELF-VENTIL., IP55 TEMP. CL. 155(F) ACC.TO 130(B) ALUMINUM HOUSING PREMIUM ► Operator control &
EFFICIENCY, 4POLE * FS80M * 0.55KW (50HZ) 0.63KW (60HZ) 3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY monitoring
IM B 3, MOTOR PROTECTION WITH 1 PTC THERMISTOR FOR SHUTDOWN G01=MOUNTING ROTARY ► Process Automation
PULSE ENCODER 1XP8012-10 (HTL) 1024 PULSES, WITH EXTERNAL FAN (F70) 1XP8032-10 IS USED
► Industrial
Communication
SIMOTICS GP Low-voltage motor with TTL encoder ► Sensor Technology

1LE1003-0DB22-2AB4-Z G02
SIMOTICS GP MOTOR TYPE: 1AV3082B LOW-VOLTAGE MOTOR, IEC SQUIRREL-CAGE, SELF-VENTIL., ► Drive Technology
IP55 TEMP. CL. 155(F) ACC.TO 130(B) ALUMINUM HOUSING PREMIUM EFFICIENCY, 4POLE * FS80M * ► CNC Software
0.55KW (50HZ) 0.63KW (60HZ) 3 AC 50HZ 230VD/400VY * 3 AC 60HZ 460VY IM B 3, MOTOR PROTECTION
WITH 1 PTC THERMISTOR FOR SHUTDOWN TERMINAL BOX AT TOP G02=MOUNTING ROTARY PULSE ► PLM Software
ENCODER 1XP8012-20 (TTL) 1024 PULSES, WITH EXTERNAL FAN (F70) 1XP8032-20 IS USED ► Important Notes

Optional hardware
SINAMICS LINE REACTOR (lateral configuration) 6SL3203-0CE13-2AA0 ► Industrial Controls

380-480V 3AC 47-63HZ, I_LN = 4.0A, STANDALONE ► Engineering
Software
CIRCUIT BREAKER, Frame size S00 3RV2011-1FA10 ► Basic Automation
► Controller/PLC

monitoring
► Industrial
Communication
► Important Notes

Optional software
STARTER 6SL3072-0AA00-0AG0 ► Industrial Controls

COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION V4.4 SP1 ► Engineering
Software
STARTDRIVE 6SL3072-4DA02-0XG0 ► SIMIT Simulation
ENGINEERING AND COMMISSIONG TOOL FOR SINAMICS VERSION V13 SP1
► Controller/PLC
SIZER 6SL3070-0AA00-0AG0
CONFIGURATION TOOL FOR SIEMENS DRIVES ► Distributed I/Os

DRIVE ES BASIC V5.5 SP5 6SW1700-5JA00-5AA0 monitoring
ENGINEERING SW FOR DRIVES, ► Process Automation
5-LANGUAGE DVD WITH ELECTRONIC DOCUMENTATION FOR STEP 7 V5.5 SP2
► Industrial
FLOATING LICENSE Communication
DRIVE ES SIMATIC V5.5 SP1 BLOCK LIBRARIES FOR SIMATIC S7 ► Drive Technology
FOR COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTRONIC ► CNC Software
DOCUMENTATION ► PLM Software
► Important Notes

SINAMICS G120 – Information
Catalog note ► Industrial Controls

► Engineering
Software
SINAMICS G120: Siemens D31
Asynchronous motors: Siemens D81.1
► Controller/PLC
Helpful information to download ► Distributed I/Os

monitoring
 SINAMICS G120C ► Process Automation
► Industrial
 Energy saving with SINAMICS G120 Communication
► CNC Software
► PLM Software
► Important Notes

SINAMICS S120 servo drive 1 AC 230V network
Software in Package
DCC SINAMICS ► Engineering
Circuit breaker Asynchronous Software
Starter motor
S120-Trainer Paket 1AC 230V – 0.55kW PROFINET i.e.. 1LE1 ► SIMIT Simulation
With power: 0.55kW ► Basic Automation
PC CONVERTER
PROFINET ► Controller/PLC
CONNECTION KIT
Control Unit
PROFINET Power Module Servo motor monitoring
CU310 PN – PM240-2 – 0.55kW i.e. 1FK7..
Compact Flash Card without EMV - Filter
Basic Operator Panel ► Industrial
Communication
S7-Controller Power line
Not part of the package ► Drive Technology
► CNC Software
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 ** V13:
V13: auch
auch 64
64 BIT
BIT Windows
Windows 8.18.1
Professional // Enterprise
Professional Enterprise ► PLM Software
► Important Notes
Technical note:
Note: When selecting motors, please contact your
Order number: 6SL3080-8AB01-0AA0 local Siemens technical sales department

1 SINAMICS G120 POWER MODULE PM240-2 6SL3210-1PB13-8UL0 ► Industrial Controls

WITHOUT FILTER WITH BUILT IN BRAKING CHOPPER 1/3AC200-240V +10/-10% 47-63HZ OUTPUT HIGH ► Engineering
OVERLOAD: 0,55KW FOR 200% 3S,150% 57S,100% 240S AMBIENT TEMP -10 TO +50 DEG C OUTPUT Software
LOW OVERLOAD: 0,75KW FOR 150% 3S,110% 57S,100% 240S AMBIENT TEMP -10 TO +40 DEG C 196 X
73 X 165 (HXWXD), FSA PROTECTION IP20 WITHOUT CONTROL UNIT AND PANEL APPROVED FOR CU
FIRMWARE- VERSION V4.6 ► Basic Automation
► Controller/PLC
1 SINAMICS S120 CONTROL UNIT CU310-2 PN WITH PROFINET INTERFACE 6SL3040-1LA01-0AA0
WITHOUT COMPACTFLASH CARD
1 SINAMICS S120 COMPACTFLASH CARD W/O PERFORMANCE EXTENSION INCLUDING CERTIFICATE 6SL3054-0EH00-1BA0- monitoring
OF LICENCE V4.7 Z:F01
1 SINAMICS S120 BASIC OPERATOR PANEL BOP20 FOR ELECTRONIC CONTROLS TWO-LINE DISPLAY, 6SL3055-0AA00-4BA0 ► Industrial
6 KEYS FOR PARAMETER SETTING AND DIAGNOSTIC INFORMATION SUITED FOR CONTROL UNITS Communication
CU305, CU310, CU320
1 SOFTWARE ON DVD: STARTER COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION 6SL3072-0AA00-0AG0 ► Drive Technology
V4.4 SP1 DVD FOR WINDOWS SERVER 2008 R2 SP1 (64-BIT) WINDOWS XP PROF SP3 (32-BIT),
► CNC Software
WINDOWS 7 (32 BIT AND 64 BIT) PROFESSIONAL, ULTIMATE AND ENTERPRISE (STANDARD) GERMAN,
ENGLISH, SPANISH FRENCH AND ITALIAN CONTAINS ALREADY THE SSP FOR SINAMICS G120 ► PLM Software
VERSION V4.7 SP3 SINAMICS S110 VERSION V4.4 SP3 SINAMICS MV VERSION V4.7 SP4 SINAMICS ► Important Notes
DCP VERSION V1.1 SINAMICS DCM VERSION V1.4 SP1
1 SINAMICS ENGINEERINGSYSTEM SINAMICS DCC V2.3 SP1 FULL LICENSE DCC FOR SINAMICS 6AU1810-1HA23-1XA0
OPTION TO STARTER V4.4 SP1 DELIVERY ON DATA CARRIER DVD INCL: FLOATING LICENSE

Optional Hardware
Circuit breaker: 5SY6110-7 ► Industrial Controls

230/400V 6KA, 1-POLE, C, 10A, D=70MM ► Engineering
Software
Power supply: 6EP1333-3BA00
SITOP MODULAR ; INPUT: 120/230-500 V AC OUTPUT: 24 V DC/5 A
Power supply: 6EP1332-1SH52
► Controller/PLC
LOGO!POWER 24 V/4 A; INPUT: 100-240 V AC; OUTPUT: 24 DC/4A
Cable: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6A, CROSSED, LENGTH 6 M
monitoring
Documentation: 6SL3097-2CA00-0YG5 ► Process Automation
SINAMICS S120 on CD-ROM
► Industrial
Communication
Terminal module TM 31 I/O expansion: 6SL3055-0AA00-3AA1
For the SINAMICS S120; 12 DI, 2 DA, 2 AE, 2 AA ► Sensor Technology
Terminal module TM54F Safety I/O: 6SL3055-0AA00-3BA0
For devices S120; Fail-safe digital inputs and outputs ► CNC Software
► PLM Software
Signal line: 6SL3060-4AA10-0AA0
DRIVE-CLIQ cable IP20 / IP20 Length: 0.95 meters ► Important Notes

SINAMICS S120 Servoantrieb 1 AC 230V Netz
Optionale Software
SIZER 6SL3070-0AA00-0AG0 ► Industrial Controls
SIEMENS DRIVES DRIVE DESIGN TOOL ► Engineering

Software
DRIVE ES BASIC V5.5 SP5 6SW1700-5JA00-5AA0 ► SIMIT Simulation

SOFTWARE ON DL-DVD: DRIVE ES BASIC V5.5 SP5 ENGINEERING-SW FOR DRIVES. ► Basic Automation
5-LANGUAGE DVD WITH ELECTR. DOCUMENTATION, FOR STEP 7 V5.5 FLOATING LICENSE
► Controller/PLC
SOFTWARE ON CD: DRIVE ES SIMATIC V5.5 SP1 BLOCK LIBRARIES FOR SIMATIC S7 FOR monitoring
COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTR. DOCUMENTATION
► Industrial
Communication
► CNC Software
► PLM Software
► Important Notes

SINAMICS S120 Servo drive 3 AC 400V Netz
Software in Package
DCC SINAMICS ► Engineering
Circuit breaker Asynchronous Software
Starter
motor
S120-Trainer Package 3AC 400V – 0.55kW PROFINET i.e.. 1LE1
With power: 0.55kW ► Basic Automation

PC CONVERTER
PROFINET ► Controller/PLC
CONNECTION KIT
Control Unit
PROFINET Power Module Servo motor monitoring
CU310 PN – PM240-2 – 0.55kW i.e. 1FK7..
Compact Flash Card ohne EMV - Filter
Basic Operator Panel ► Industrial
Communication
S7-Controller Power line
Not part of the package ► Drive Technology
► CNC Software
System requirements: 64 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 * V13: auch 64 BIT Windows 8.1
Professional / Enterprise
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1 ► PLM Software
► Important Notes
Technical note:
Note: When selecting motors, please contact your
Order number: 6SL3080-8AE01-0AA0 local Siemens technical sales department

1 SINAMICS POWER MODULE PM240-2 WITHOUT FILTER WITH BUILT IN BRAKING CHOPPER 1/3AC200- 6SL3210-1PE12-3UL1 ► Industrial Controls
240V +10/-10% 47-63HZ OUTPUT HIGH OVERLOAD: 0,55KW FOR 200% 3S,150% 57S,100% 240S ► Engineering
AMBIENT TEMP -10 TO +50 DEG C OUTPUT LOW OVERLOAD: 0,75KW FOR 150% 3S,110% 57S,100% Software
240S AMBIENT TEMP -10 TO +40 DEG C 196 X 73 X 165 (HXWXD), FSA PROTECTION IP20 WITHOUT
CONTROL UNIT AND PANEL APPROVED FOR CU FIRMWARE- VERSION V4.6
1 SINAMICS S120 CONTROL UNIT CU310-2 PN WITH PROFINET INTERFACE 6SL3040-1LA01-0AA0
WITHOUT COMPACTFLASH CARD ► Controller/PLC
1 SINAMICS S120 COMPACTFLASH CARD W/O PERFORMANCE EXTENSION INCLUDING CERTIFICATE 6SL3054-0EH00-1BA0-
OF LICENCE V4.7 Z:F01 ► Operator control &
F01: 1 X SAFETY LICENCE DBSI monitoring
1 SINAMICS S120 BASIC OPERATOR PANEL BOP20 FOR ELECTRONIC CONTROLS TWO-LINE DISPLAY, 6SL3055-0AA00-4BA0
6 KEYS FOR PARAMETER SETTING AND DIAGNOSTIC INFORMATION SUITED FOR CONTROL UNITS ► Industrial
CU305, CU310, CU320 Communication
1 SOFTWARE ON DVD: STARTER COMMISSIONING TOOL FOR SINAMICS AND MICROMASTER VERSION 6SL3072-0AA00-0AG0
V4.4 SP1 DVD FOR WINDOWS SERVER 2008 R2 SP1 (64-BIT) WINDOWS XP PROF SP3 (32-BIT), ► Drive Technology
WINDOWS 7 (32 BIT AND 64 BIT) PROFESSIONAL, ULTIMATE AND ENTERPRISE (STANDARD) GERMAN, ► CNC Software
ENGLISH, SPANISH FRENCH AND ITALIAN CONTAINS ALREADY THE SSP FOR SINAMICS G120
VERSION V4.7 ► PLM Software
► Important Notes
1 SINAMICS ENGINEERINGSYSTEM SINAMICS DCC V2.3 SP1 6AU1810-1HA23-1XA0
FULL LICENSE DCC FOR SINAMICS OPTION TO STARTER V4.4 SP1 DELIVERY ON DATA CARRIER DVD
INCL: FLOATING LICENSE

SINAMICS S120 Servo drive 3 AC 400V Netz
Optionale Hardware
Circuit breaker: 3RV2011-1FA10 ► Industrial Controls

CIRCUIT-BREAKER SZ S00, FOR MOTOR PROTECTION, CLASS 10, A-RELEASE 3.5...5A, ► Engineering
Software
Power supply: 6EP1333-3BA00
SITOP MODULAR; INPUT: 120/230-500 V AC OUTPUT: 24 V DC/5 A
Power supply: 6EP1332-1SH52
LOGO!-POWER 24 V/4 A; INPUT: 100-240 V AC; OUTPUT: 24 DC/4 A ► Controller/PLC
Cable: 6XV1870-3RH60
SIMATIC NET INDUSTRIAL ETHERNET TP XP CORD RJ45/RJ45, CAT 6A, CROSSED, LENGTH 6 M ► Operator control &
monitoring
Documentation: 6SL3097-2CA00-0YG5 ► Process Automation
SINAMICS S120 on CD-ROM
► Industrial
Terminal module TM 31 I/O expansion: 6SL3055-0AA00-3AA1 Communication
For the SINAMICS S120; 12 DI, 2 DA, 2 AE, 2 AA ► Sensor Technology
Terminal module TM54F Safety I/O: 6SL3055-0AA00-3BA0 ► Drive Technology

For devices S120; Fail-safe digital inputs and outputs ► CNC Software
Signal line: 6SL3060-4AA10-0AA0 ► PLM Software

DRIVE-CLIQ cable IP20 / IP20 Length: 0.95 meters ► Important Notes

Optionale Software
SIZER 6SL3070-0AA00-0AG0 ► Industrial Controls
SIEMENS DRIVES DRIVE DESIGN TOOL ► Engineering

Software
DRIVE ES BASIC V5.5 SP5 6SW1700-5JA00-5AA0 ► SIMIT Simulation

SOFTWARE ON DL-DVD: DRIVE ES BASIC V5.5 SP5 ENGINEERING-SW FOR DRIVES. ► Basic Automation
5-LANGUAGE DVD WITH ELECTR. DOCUMENTATION, FOR STEP7 V5.5 FLOATING LICENSE
► Controller/PLC
SOFTWARE ON CD: DRIVE ES SIMATIC V5.5 SP1 BLOCK LIBRARIES FOR SIMATIC S7 FOR monitoring
COMMUNICATION WITH DRIVES 5-LANGUAGE CD; WITH ELECTR. DOCUMENTATION
► Industrial
Communication
► CNC Software
► PLM Software
► Important Notes

SIMOTION D410-2 add on for SINAMICS S120
1- and 3- phase
SIMOTION D410-2 is a single-axis system, which can be used in combination with SINAMICS S120 ► Industrial Controls
AC/AC Power Module. ► Engineering
Software
SIMOTION D410-2 is the entry level controller in the SIMOTION D family. ► SIMIT Simulation
SIMOTION D410 is the ideal controller, if Motion Control for a single-axis and PLC functionality
► Controller/PLC
is demanded in a small form factor.
PROFINET IO with IRT (with D410-2 PN/DP) enables various connectivity with HMI and distributed IOs. ► Operator control &
monitoring
► Industrial
Communication
► CNC Software
► PLM Software
► Important Notes

SIMOTION D410-2 add-on for SINAMICS S120
1 SIMOTION DRIVE-BASED CONTROL UNIT D410-2 DP/PN; PROGRAMMABLE SINGLE AXIS 6AU1410-2AD00-0AA0 ► Industrial Controls
MOTION CONTROL WITH MULTIPLE AXES OPTION; INTERFACES: 5 DI, 8 DI/DO, ► Engineering
3 F-DI, 1 F-DO, 1 AI,1 ENCODER, 1 DRIVE-CLIQ,1 PROFIBUS, 2 PROFINET PORTS,1 ETHERNET Software
1 SIMOTION DRIVE-BASED 1 GB COMPACT FLASH CARD D410-2; SINAMICS DRIVE SOFTWARE V4.X 6AU1400-1PA23-0AA0 ► SIMIT Simulation
AND SIMOTION KERNEL FOR SIMOTION D410-2; UP-TO-DATE SOFTWARE VERSION; NOTE: NOT
FOR SIMOTION D410, D4X5 AND D4X5-2
► Controller/PLC
1 SIMOTION ENGINEERING SYSTEM SCOUT AND SCOUT TIA V4.4 FULL LICENSE DVD INCL. STARTER, 6AU1810-1BA44-0XA0
RUNTIME, TECHN., DOCUMENTATION FREE UTILITIES ► Distributed I/Os
1 SIMOTION ENGINEERING SYSTEM DCC SIMOTION V2.3 FULL LICENSE DCC FOR SIMOTION AND FOR 6AU1810-1JA23-0XA0 ► Operator control &
SINAMICS OPTION FOR SCOUT V4.4 AND FOR STARTER V4.4 SUPPLIED ON DATA STORAGE MEDIUM monitoring
DVD INCL: FLOATING LICENSE ► Process Automation
1 SIMOTION IT COMPREHENSIVE IT FUNCTIONS WITH JAVA VIRTUAL MACHINE: RUNTIME 6AU1820-8BD20-0AB0 ► Industrial
ENVIRONMENT FOR JAVA APPLICATIONS ON SIMOTION LICENSE (COL) INCLUDES THE FOLLOWING Communication
LICENSES:
SIMOTION IT DIAG: 6AU1820-8BA20-0AB0
SIMOTION IT OPC XML-DA: 6AU1820-8BB20-0AB0 ► Drive Technology
► CNC Software
System requirements: 64 BIT: Windows 7 Professional, Ultimate SP1 ► PLM Software

32 BIT: Windows 7 Professional, Ultimate SP1
► Important Notes
Order number: 6SL3080-8LA00-0AA0

SIMOTION D410 add on for SINAMICS S120
Optional software and hardware
SIMOTION ENGINEERING SYSTEM SCOUT STANDALONE SOFTWARE CARE SERVICE ► Industrial Controls
6AU1810-0BA00-0XL0
► Engineering
SINAMICS TERMINAL MODULE CABINET TM31 WITHOUT DRIVE-CLIQ CABLE ADD-ON MODULE
6SL3055-0AA00-3AA1 Software
FOR SINAMICS CONVERTERS WITH DIGITAL AND ANALOG INPUTS AND OUTPUTS
SIGNAL CABLE; DRIVE-CLIQ MOTION CONNECT 500 IP20/IP20 LENGTH 0.95 m 6SL3060-4AA10-0AA0
► Controller/PLC

monitoring
► Industrial
Communication
► Important Notes

CNC Software
• Overview
• Download preview version SinuTrain Operate V4.7 - Basic
• SinuTrain Operate V4.7
• SinuTrain Operate Students Package V4.7
 Curriculums
Download preview version SinuTrain for SINUMERIK Operate V4.7 - Basic
The SinuTrain offline programming station brings SINUMERIK Operate to the PC, including animated ► Industrial Controls
machine control panel, to create a training situation that is very similar to that in reality, thus facilitating ► Engineering
easy transition from a training environment into a practical environment. Software
This powerful tool allows NC programs to be programmed offline at a PC in an environment that is
close to reality; these NC programs can then be directly transferred to the CNC. Using SINUMERIK
Operate and the original SINUMERIK CNC kernel, all operating and programming operations can be ► Controller/PLC
used and CNC programs executed, without any restrictions. ► Distributed I/Os

SinuTrain for SINUMERIK Operate Version 4.7 Basic based on SINUMERIK CNC software 4.7. monitoring
The control-identical NC programming station as a basic version with no time limit –
► Industrial
are available here as a preview version: www.siemens.com/sinutrain-downloads Communication
Sales and delivery release of SinuTrain for SINUMERIK Operate V4.7 Basic, see bottom right
► CNC Software
System requirements: MS Windows 7 Home Basic, Home Premium, Professional, Ultimate, Enterprise (32-/64-Bit) ► PLM Software
MS Windows 8.1, MS Windows 8.1 Pro, Enterprise (32-/64-Bit)
► Important Notes
Sales note: Schools, colleges and universities, not for in-house vocational training departments
Technischer Hinweis: Basic-Version – with no time limit
Order number: Download www.siemens.com/sinutrain-downloads
 SinuTrain V4.7
Trainer Package – SinuTrain for SINUMERIK Operate V4.7
1 x SinuTrain Trainer Package Classroom license for 6 PCs ► Industrial Controls

► Engineering
Software
2 x SinuTrain Student Package 6FC5870-1SC43-0YA0 Students 1x Classroom license ► SIMIT Simulation
► Controller/PLC
SinuTrain for SINUMERIK OPERATE 4.7 is applicable for ► Distributed I/Os

2x20 Student licenses
SINUMERIK 840D SL, SINUMERIK 828D/828D BASIC with CNC SOFTWARE 4.7 SP2 HF1 ► Operator control &
300 hours each
monitoring
SinuTrain V4.7 for in-house vocational training departments: See bottom right
► Industrial
Training manuals Communication
1x Easy milling with ShopMill
1x Easy turning with ShopTurn
1x First-Time User Instructions ► Drive Technology
► CNC Software
► Important Notes
Order number: 6FC5870-1TC43-0YA0
 SinuTrain V4.7
Student package – SinuTrain for SINUMERIK Operate V4.7
SINUTRAIN for SINUMERIK OPERATE VERSION 4.7 Students ► Industrial Controls

20 STUDENT PACKAGE for 300 hours ► Engineering
Software
SinuTrain for SINUMERIK OPERATE 4.7 is applicable for
20x Students versions ► Basic Automation
SINUMERIK 840D SL, SINUMERIK 828D/828D BASIC with CNC-SOFTWARE 4.7 SP2 HF1
each 300 hours ► Controller/PLC
SinuTrain V4.7 for in-house vocational training departments: See bottom right ► Operator control &
monitoring
► Industrial
Communication
► CNC Software
► Important Notes
Order number: 6FC5870-1SC43-0YA0
 SinuTrain V4.7

► Engineering
Software
2 x SinuTrain Student Package 6FC5870-1SC41-0YA0 Students 1x Classroom license ► SIMIT Simulation
► Controller/PLC
SinuTrain for SINUMERIK OPERATE 4.5 is applicable for ► Distributed I/Os

2x20 Student licenses
SINUMERIK 840D SL, SINUMERIK 828D/828D BASIC with CNC SOFTWARE 4.5 ► Operator control &
300 hours each
monitoring
SinuTrain V4.5 for in-house vocational training departments: See bottom right
► Industrial
Training manuals Communication
► CNC Software
► PLM Software
► Important Notes
 SinuTrain V4.5
SINUTRAIN for SINUMERIK OPERATE VERSION 4.5 Students ► Industrial Controls

20 STUDENT PACKAGE for 300 hours ► Engineering
Software
SinuTrain for SINUMERIK OPERATE 4.5 is applicable for
20x Students versions ► Basic Automation
SINUMERIK 840D SL, SINUMERIK 828D/828D BASIC with CNC-SOFTWARE 4.5
each 300 hours ► Controller/PLC
SinuTrain V4.5 for in-house vocational training departments: See bottom right ► Operator control &
monitoring
► Industrial
Communication
► CNC Software
► PLM Software
32 BIT: Windows 7 Professional, Enterprise, Ultimate SP1, Windows XP Professional SP3
► Important Notes
 SinuTrain V4.5

6FC5870-8YC40-2YA0 ► Engineering
Software
Students
1 x SinuTrain Student Package 1x Classroom license ► SIMIT Simulation
6FC5870-1SC40-1YA0
► Controller/PLC
32 Student licenses
SinuTrain for SINUMERIK OPERATE 4.4 is applicable for 300 hours each ► Operator control &
• SINUMERIK 840D SL with SW V2.7 and V4.4 monitoring
• SINUMERIK 828D/828D BASIC with SW V2.7 and V4.4 ► Process Automation
► Industrial
SinuTrain V4.4 for in-house vocational training departments: See bottom right Training manuals Communication
► CNC Software
► PLM Software
► Important Notes
 SinuTrain V4.4
SINUMERIK 828D/828D BASIC WITH SW 2.7 AND 4.4 Students ► Industrial Controls
SINUMERIK 840D SL WITH CNC SW 2.7 AND 4.4 ► Engineering
EDUCATION SW ON DVD Software
SINUTRAIN FOR SINUMERIK OPERATE ► SIMIT Simulation
32x Student licenses
300 hours each ► Basic Automation
► Controller/PLC
SinuTrain FOR SINUMERIK OPERATE 4.4 IS APPLICABLE FOR
• SINUMERIK 840D SL WITH SW V2.7 AND V4.4
• SINUMERIK 828D/828D BASIC WITH SW V2.7 AND V4.4 ► Operator control &
monitoring
► Industrial
SinuTrain V4.4 for in-house vocational training departments: See bottom right Communication
► CNC Software
► PLM Software
► Important Notes
Sales note: Schools, colleges and universities, not for in-house vocational training departments!
 SinuTrain V4.4
Siemens Product Lifecycle Management (PLM) Software
• Overview
• PLM Software

PLM Software
 NX, with new tools and technologies, the latest release of NX delivers productivity throughout ► Engineering
product development. See how NX can help you accelerate your design, engineering, and Software
manufacturing processes. ► SIMIT Simulation
 Tecatix, is a comprehensive portfolio of digital manufacturing solutions that deliver innovation ► Controller/PLC
by linking all manufacturing disciplines together with product engineering – from process layout
and design, process simulation and validation, to manufacturing execution.
monitoring
 Teamcenter, helps you deliver increasingly complex products to market while maximizing ► Process Automation
productivity and streamlining global operations. ► Industrial
Communication
Velocity Series, Powerful and easy-to-use software tools for product development. Solid Edge, ► Sensor Technology
Femap, CAM Express and 3D Sync. ► Drive Technology
 Solid Edge Highschool  Solid Edge Students ► CNC Software
► PLM Software
Kontakt Partner
► Important Notes
Germany: Karl Hermann Dietz [email protected]
Austria: Hermann Kaineder [email protected]
Switzerland: Marika Kerschbaumer [email protected]
Other Countries: [email protected]

Important Notes
• Overview
• WorldSkills
• Purchasing Remarks for SCE Trainer Packages

Partnership with WorldSkills for training on an industrial level
WorldSkills Competition – Best of Nations
WorldSkills (WS) promotes the quality of vocational education for > 60 years
WS competition of careers every 2 years with > 200,000 visitors:

… Leipzig 2013, São Paulo 2015, Abu Dhabi 2017, Kazan 2019 …
Siemens has been a Global Industry Partner and a Product Sponsor since 2010 for
Skill 19 Industrial Control, Skill 1 Polymechanics/Automation …
Siemens supports the WS competition as well as selected continental/regional competitions

 WorldSkills
Purchasing Remarks of SCE Trainer Packages
For the purchasing of SCE Trainer Packages, a special additional agreement is required. ► Industrial Controls
This agreement for SIMATIC Software for classroom use at research-, development- and education ► Engineering
Software
institutions„ has to be signed and send for release of the delivery to SCE Team global.
SCE Contact partner will find these at SCE Intranet:  Additional Agreement
Release for delivery ► Controller/PLC
Trainer packages are released trough Siemens AG, SCE Team global ► Distributed I/Os
Contact Partner: Christian Callegari Fax: +49 (0)911-895-133928 and [email protected] ► Operator control &
monitoring
Exception: The following Trainer packages are not intended for vocational in-house training Departments.
► Industrial
Communication
SIMATIC STEP 7 Trainer package (12er Classroom License) 6ES7822-1BA03-4YA5 ► Drive Technology
Upgrade SIMATIC STEP 7 Trainer package (12er Classroom License) 6ES7822-1AA03-4YE5 ► CNC Software
SIMATIC S7 Software for Students Students 6ES7822-1AC03-4YA5 ► PLM Software
SinuTrain Operate 6FC5870-1T… ► Important Notes
SinuTrain Operate for Students Students 6FC5870-1S…

Thank you for your attention!
Christian Callegari
SCE Team global
E-Mail: [email protected]
siemens.com/sce


Paquetes Educativos

Uploaded by

Copyright:

Available Formats

Paquetes Educativos

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Paquetes Educativos

Uploaded by

Copyright:

Available Formats

SCE Guide Trainer Packages

Siemens Automation Cooperates with Education (SCE) | 07/2016

Unrestricted © Siemens AG 2016 siemens.com/sce

Through cooperative partnerships, we help educators to plan their classes in

Overview of SCE services

> 80 Trainer Packages for practice-oriented education

 Curriculums  Trainer Packages

Who are these Trainer Packages for?

What should be considered when using Trainer Packages?

!!! Important Notes

SIMATIC Engineering Software Operator Control & Monitoring SIMATIC Controller

Operator control & SIMATIC Controller Distributed IOs

Unrestricted © Siemens AG 2016

 Curriculums  Learning Systems

2 CABLE CONNECTOR SIZE S00 SPRING-LOADED TERMINAL 3RV2917-5AA00 ► Controller/PLC

Technical note: See slides below

Order number: 3TK3388-0TP00

 Project manual  SIRIUS

1 WIRING KIT, SPRING-LOADED ELECTRICAL AND MECHANICAL, 3RA2913-2AA2 ► Industrial Controls

Matching: Trainer package ET 200SP with IO-Link communication module: 6ES7155-6AU00-0AB2

 Project manual  SIRIUS

► Operator control &

Matching: Trainer package ET 200SP with IO-Link communication module: 6ES7155-6AU00-0AB2

 Project manual  SIRIUS

► Operator control &

Safety Relays 3SK1 ► Sensor Technology

SIRIUS@YouTube  ► PLM Software

 Project manual  SIRIUS

 Curriculums  Learning Systems

SIMATIC HMI software - ETHERNET connection for engineering

Unrestricted © Siemens AG 2016

1 x Combo license for interchangeable usage ► Industrial Controls

12 x Combo license for interchangeable usage ► Industrial Controls

12 x Combo license for interchangeable usage ► Industrial Controls

Technical note: Authorization on USB stick (1 stick)

20 x Combo license for interchangeable usage Students ► Industrial Controls

Technical note: Authorization on USB stick (1 stick)

Order number: 6ES7822-1AC03-4YA5

Standard control 6ES7860-2AA00-4YX0 ► Industrial Controls

Technical note: None available

Order number: 6ES7860-2AA00-4YX0 Standard 6ES7860-1AA00-4YX0 Modular

Unrestricted © Siemens AG 2016

SIMATIC S7 PID controller for 6 licenses ► Industrial Controls

► Operator control &

Unrestricted © Siemens AG 2016

12 x SIMATIC CFC V8.2 Students ► Industrial Controls

Technical note: Authorization on USB stick (1 stick)

Order number: 6ES7658-1EX28-0YS5

Unrestricted © Siemens AG 2016

20 x SIMATIC CFC V8.2 Students ► Industrial Controls

Technical note: Authorization on USB stick (1 stick)

Order number: 6ES7658-1EX28-0YS6

Unrestricted © Siemens AG 2016

12 X 6GK1704-1CW13-0AA0 SIMATIC NET IE SOFTNET-S7 V13 SP2 ► Industrial Controls

Technical note: None available

Order number: 6GK1950-0BB01

Unrestricted © Siemens AG 2016

 Curriculums  Learning Systems

Full version with one dongle ► Industrial Controls