Cvand Cover Letteer

COVER LETTER
To,
DIRECTOR / H.R. MANAGER,
Applicant: Mr. Sandeep Dilip Suryavanshi
Diploma in Production technology
Subject: Application for Sr. Design Engineer-Mechanical Design ( Related to any job in Solar
Invertor/ Industrial Electronics / Control Panel / EPC Project / Power Transformer / Distribution
transformer / High Voltage & High Current Transformers / Rectifier Panel / AUTOCAD / Auto lisp
Programming / Solid works / Auto desk Inventor / Detail ENGINEERING etc )
Respected Sir / Madam,
I hope there is a vacancy in your well reputed company. I am applying for Sr. Design
Engineer -Mechanical Design post. If the chance is given to me, I will work hard and sincerely.
Hope, my application will be considered sympathetically. Details about me and my current job
experience are given in my resume, attached with this job application.
Total years of Exp: 8 + Years
Current Company: PRETTL Electronics India Pvt. Ltd., Pune.
Previous Company: AE ADVANCED ENERGY , Pune
Current Location: India (Pune)
Preferred Location: India (Pune, Nashik, Navi-Mumbai,Gujarat, Bangalore, Hyderabad), Overseas
Current CTC: INR 6.15 Lakh/annum
Expected CTC: As per your Industry Standard
Passport: Yes
Notice Period: 1 month
Thanks & Regard

Sandeep Dilip Suryavanshi
9762186849
CURRICULUM VITAE
Name:Sandeep Dilip Suryavanshi
Qualification:Diploma in Production technology
Mobile:+ 91 – 9762186849
E-mail: [email protected] , [email protected]
Objective:
To work hard with full determination and dedication to achieve organizational as well as personal goals.
Key skills and competencies
 3D complex design and drafting of Sheet Metal, Structure, Plastic, Rubber components.
 Experience in mechanical design of IP 65, 66, 54 enclosures, Central, off grid and on grid Inverter
cabinet and panel, control panel, rectifier panel, and modular rack system design as per design
standards.
 Experience in mechanical design of high voltage, high current, distribution, power, and dry type
transformers.
 Experience in mechanical Material selection, Mechanical Component selection, bench marking.
 Experience in analysis of sheet metal parts using Solid Works Premium like FEA (Finite Element
Analysis).
 Experience in cable harness design using Solid Works Premium 2013 cable routing tool.
 Experience in PCB 3D design using Solid Works Premium 2013 Circuit works.
 Experience in Auto lisp programing.
 Awareness of IS, IEC standards.
TOTAL PROFESSIONAL EXPERIENCE: 8+ YEARS
Work experience:
 Current Organization: PRETTL Electronics India Pvt. Ltd. (Since July 2015 to till date)
Business Domain: Automotive
Role: - Sr. Design Engineer -Engineering
Project: Car window lifting motor brush Card, Wire harness, power tool brush card.
Rolle’s and Responsibility

 Design and development of Assembly line tools, Jig and fixtures for Electro-mechanical and wiring
harness products.
 Supports in making BOM and understanding the drawing specifications.
 Creates 3D solid models and coordinates construction of proto samples. Creates external customer models in
the required format.
 Process design and development activities.
 Prepares and follows engineering change requests (ECR) as per document control procedures.
 Processes validation parameter setting as per Machine requirement.
 Support to production for line error, Quality Department for vendor discussion.
 Prepare BOM for wire harness as per Customer requirement and Drawing, new RFQ.
 Prepare PFMEA, APQP Document.
 Conduct audit for external vendor, some role for vendor development.
 Support marketing for cost estimation and technical discussions.
 Previous Organization: Advanced Energy. (Since June 2012 to April 2015)
Business Domain: Solar Energy
Role: - Sr. Engineer Mechanical Design (R&D)
Project: AC& DC Combiner box, array junction box, smart hybrid controller, String and Central Inverter
Roles and Responsibility

 Design of mechanical enclosure for AC & DC combiner box, array junction box Hybrid Smart
Controller as per IEC 60529.
 Placement of component as per heat loss calculation, clearances and Creep age Distances as per IEC
60439, IEC 60664.
 Design of mechanical panel for 1.5MV central inverter.
 Design of mechanical enclosure for 8K to 46K on grid inverter
 Design of Knock out concept suitable to IP 65 for AC & DC combiner box.
 Design of Enclosure mounting 3 in 1 (pole, structure & wall) for AC & DC combiner box, array
junction box.
 Mechanical Component selection, bench marking ( Cable gland, Hardware, Fasteners, PCB mounting
component, Cable lugs, ventilation plugs, insulator, terminal, din rail, spacers, sticker labels, etc.)
 Material selection, mechanical properties comparison as per standards like Aluminium, CRCA,
Copper ,S.S, Nylon, Rubber, for AC & DC combiner box, Array junction box, Hybrid smart controller.
 Design of gasket profile, gasket Material selection and Comparison with different Rubber material.
 Cable harness design using solid works premium 2013 cable routing tool.
 PCB 3D design using solid works premium 2013 Circuit works.
 Preparation of Design Documentation like, production assembly manual, Installation manual.
 Participate in IP 65, environmental, Shock and vibration testing as per IEC standards
 Proto building and mechanical testing.
 Previous Organization: KRAFTPOWERCON INDIA PVT.LTD. (Since May 2011 to June 2012)
Business Domain: power electronics equipment.
Role: - Senior Engineer CAD
Project: standardization of HCR and battery formation panel.
 Mechanical design of High Current transformer and rectifier panel (30A to 10000A) as per electrical
specification & technical requirement.
 Mechanical design of High Voltage transformer and control panel 60kV 100mA to 250kV 2500mA as
per electrical specification & technical requirement.
 Mechanical design of Battery charger / discharger panel 15A to 120A.
 Mechanical design of bus ducts.
 3D modelling of transformer and panel using solid works premium 2012.
 Prepare layout and details fabrication drawing using AutoCAD 2012.
 Prepare BOM, IGA, OGA, purchase specifications, design document.
 Calculation of tank volume, conservator volume, oil quantity, weight of other accessories & fittings.
 Standardization of HCR & battery formation panel & transformer with tank.
 Previous Organization: METITO POLLUTION CONTROL INDIA PVT.LTD.
Business Domain: Water management solutions (Since November 2010 to May 2011)
Role: - CAD Engineer
Project: waste water.
 Drafting of piping isometric drawing and prepare BOM.
 Design of structural support, details drawing for piping.
 Detail drafting of ladder & platform, GLS tank as per layout.
 Previous Organization: ADOR POWERTRON LIMITED. (Since June 2006 to November 2010)
Business Domain: Power electronics equipment.

Role: - CAD Engineer
Project:
 Tank & corrugated wall panel tested at – 55ºC with different welding electrodes & different welding
process.
 Product standardization
Roles and Responsibility
 Mechanical design of High Voltage transformer 60kV 100mA to 250kV 2500mA as per electrical
specification & technical requirement.
 3D modelling of transformer and panel using Autodesk inventor 2008,2009
 Prepare layout and details fabrication drawing using AutoCAD 2008.
 Prepare BOM, IGA, OGA, purchase specifications, design document.
 Standardization high voltage transformer and internal assembly with tank.
 Fabrication Inspection as per drawing , NDT testing (dry penetrate test)
 Work on fabrication quality assurance plane with different IS standers
 Prepare Auto lisp program for tank fabrication, packing box, internal assembly of transformer.
Academic Details:
 Diploma in production Technology –70.31%
Branch: Production Technology
Institution: S.R.G.S (I.O.T) Hadapsar
Board: Board of technical education. Mumbai.
Year of Passing: 2005-2006.
 Secondary School Certificate – 52.40%
Institution: Sadana Vidalia
Board: Maharashtra board.
Year of Passing: 1999-2000.

Software Proficiency:
 Solid works premium.

 Auto cad
 Auto lisp – (2d & 3d programming with DCL)
 Inventor professional
Personal Details:
 Date of Birth : 14th November 1983

 Gender : Male.
 Marital Status : Married.
 Nationality : Indian.
 Languages Known : English, Hindi, and Marathi.
HOBBIES:
 Carom.
 Trekking
 Computer programming
DECLARATION
I hereby declare that all the details furnished above and enclosures are true to the best of my
knowledge.
Date:
Place: Pune. (Suryavanshi SandeepDilip)

Cvand Cover Letteer

Uploaded by

Copyright:

Available Formats

Cvand Cover Letteer

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Cvand Cover Letteer

Uploaded by

Copyright:

Available Formats

COVER LETTER

DIRECTOR / H.R. MANAGER,

Applicant: Mr. Sandeep Dilip Suryavanshi

Diploma in Production technology

Respected Sir / Madam,

Total years of Exp: 8 + Years

Current Company: PRETTL Electronics India Pvt. Ltd., Pune.

Previous Company: AE ADVANCED ENERGY , Pune

Current Location: India (Pune)

Preferred Location: India (Pune, Nashik, Navi-Mumbai,Gujarat, Bangalore, Hyderabad), Overseas

Current CTC: INR 6.15 Lakh/annum

Expected CTC: As per your Industry Standard

Notice Period: 1 month

Thanks & Regard

Key skills and competencies

TOTAL PROFESSIONAL EXPERIENCE: 8+ YEARS

Rolle’s and Responsibility

Roles and Responsibility

Business Domain: Power electronics equipment.

 Diploma in production Technology –70.31%

Branch: Production Technology

Institution: S.R.G.S (I.O.T) Hadapsar

Board: Board of technical education. Mumbai.

Year of Passing: 2005-2006.

 Secondary School Certificate – 52.40%

Institution: Sadana Vidalia

Board: Maharashtra board.

Year of Passing: 1999-2000.

 Solid works premium.

 Date of Birth : 14th November 1983

Place: Pune. (Suryavanshi SandeepDilip)

You might also like