Creo Simulate 3.0 SAXSIM7

PTC Creo Simulate 3.
0
- News
- 10 “Tips & Tricks”
Urs Simmler
February 27, 2015
MCAD Simulation Specialist
PTC (Schweiz) AG
Presentation
Urs Simmler
MCAD-Simulation-Specialist
PTC (Schweiz) AG
mail: [email protected]
phone: +41 44 824 34 36
Focused on PTC-Simulation Products

Presales, Training, Consulting, …
27+ Years Simulation-Experience (19 Years with PTC)
PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 2

Agenda
• PTC Creo Simulate 3.0: News

with Live -Demo
• PTC Creo Simulate 3.0: 10 "Tips & Tricks"

with Live -Demo
• PTC Creo Simulate 3.0: “Best Practice”-CD
• Questions

PTC Creo Simulate 3.0: News

User Experience
> Automatic preloads

for fasteners
> Fatigue Analysis with

Multiple Load Sets
> Stress intensity factor

measures for cracks

User Experience
> Improved UI for

linearized stresses
> Can enter Simulate

with failed features
> Faster entrance into

Simulate from
Creo Parametric &
Creo Direct

User Experience
> Beams, shells, fasteners

displayed as solid geometry
> In addition there are many

other small, less impactful
features added to Creo 3.0

Engineering Functionality
> New Ribbon-based

UI for Results
> Contact with sliding

finite friction
> Faster dynamic

analyses

Live: Contact Analysis with finite Friction
Clip Analysis: LDA / Contact with finite Friction

PTC Creo Simulate 3.0: 10 "Tips & Tricks"

PTC Creo Simulate 3.0: 10 "Tips & Tricks"
1. Meaningful “config.pro”-Options
2. Replace Templates in Installation Directory
3. Inheritance-Feature to create a dependent Copy
4. Constrain the Center of a Hole
5. Temperature-dependent Material Properties
6. Hydraulic Pressure Load
7. 2D-Pressfit Analysis
8. Mapkeys in Postprocessor
9. Use deformed Model in Creo Parametric
10. Result-Export for Creo-View

# 1: Meaningful “config.pro”-Options

# 1: Meaningful “config.pro”-Options
Speed up the Model-Setup / Postprocessing with meaningful “config.pro”-Options

• sim_pp_legend_levels 15
• sim_pp_template_dir D:\PTC\admCreo3\bibliothek\mechanica
• sim_pp_background_color white
• sim_display_current_csys_triad YES
• sim_display_z_buffered NO
• sim_results_on_first_pass YES
• sim_solver_memory_allocation 8192
• ……

# 2: Replace Templates in Installation Directory

# 2: Replace Templates in Installation Directory
Meaningfull Templates are accelerating the Postprocessing

• sim_pp_static_template.rwt
• sim_pp_non_lin_static_template.rwt
• sim_pp_modal_template.rwt
• Examples:
– D:\PTC\Creo30_M020\Creo 3.0\M020\Common
Files\mech\text\results_templates

# 3: Inheritance-Feature to create a dependent Copy

# 3: Inheritance-Feature
Use Inheritance-Feature in Creo Parametric to create a dependent Copy

• PTC Windchill PDMLink will take care about
this Relationship
• Use Flexible Modelling Extension (FMX) for

Simplification

# 4: Constrain the Center of a Hole

# 4: Constrain the Center of a Hole
Hole can be constrained in the Center without loosing Flexibility

• By using:
– Weighted Link: Hole / Center Point
– Very stiff Spring ”to Ground” from
Center Point

# 5: Temperature-dependent Material Properties

# 5: Temperature-dependent Material Properties
The following Material Properties can be dependent from Temperature:

• Poisson’s Ratio
• Young’s Modulus
• Coeff. Of Thermal Expansion

– Press the Right Mouse Bottom (RMB)

# 6: Hydraulic Pressure Load

# 6: Hydraulic Pressure Load
Setup Hydraulic Pressure Load with a Symbolic Function

• For hydraulic pressure use the formula:
if(z>0,z*1e-9*9810,0)
– Unit-Sys: mmNs
– 1e-9 t/mm³ Density of Water
– 9810 mm/s² Gravity on Earth

# 7: 2D-Pressfit Analysis

# 7: 2D-Pressfit Analysis
Pressfit Simulation of a rotaded Assembly can be performed in 2D

• Setup 2D-Axisymmetric Model
– Use Coordinate System (Y=Rot-Axis / X=Rad-Dir)
– All Topology is in 1st Quadrant (+X / +Y)

# 8: Mapkeys in Postprocessor

# 8: Mapkeys in Postprocessor
Mapkeys are accelerating the Postprocessing

• Create Mapkeys for repeatable Actions in
the Postprocessor such as:
– Capping Iso-Surfaces (AF)
– Legend Formatting (LA)
– ….

# 9: Use deformed Model in Creo Parametric

# 9: Use deformed Model in Creo Parametric
deformed Model can be saved in the Postprocessor as VRML (.wrl)

• Assemble VRML in Creo Parametric for:
– Clash detection
– Clearance Analysis

# 10: Result-Export for Creo-View

# 10: Result-Export for Creo-View
Share Simulate-Results with Others who do not own a PTC Creo Simulate-License
• PTC Creo View (Express)

Live: PTC Creo Simulate 3.0: 7 "Tips & Tricks"
Static Analysis of a Chair Component covering 7 "Tips & Tricks"

• Meaningful “config.pro”-Options
• Replace Templates in Installation Directory
• Inheritance-Feature to create a dependent Copy
• Constrain the Center of a Hole
• Mapkeys in Postprocessor
• Use deformed Model in Creo Parametric
• Result-Export for Creo-View

now you are
ready to go for
gold !!!
;-)

PTC Creo Simulate 3.0 “Best Practice”-CD
You will find a copy of the PTC Creo Simulate 3.0 “Best Practice”-CD in your Seminar Documentation

Questions

Thank You

Creo Simulate 3.0 SAXSIM7

Uploaded by

Copyright:

Available Formats

Creo Simulate 3.0 SAXSIM7

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Creo Simulate 3.0 SAXSIM7

Uploaded by

Copyright:

Available Formats

PTC Creo Simulate 3.

Focused on PTC-Simulation Products

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 2

• PTC Creo Simulate 3.0: News

• PTC Creo Simulate 3.0: 10 "Tips & Tricks"

• PTC Creo Simulate 3.0: “Best Practice”-CD

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 3

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 4

> Automatic preloads

> Fatigue Analysis with

> Stress intensity factor

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 5

> Improved UI for

> Can enter Simulate

> Faster entrance into

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 6

> Beams, shells, fasteners

> In addition there are many

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 7

> New Ribbon-based

> Contact with sliding

> Faster dynamic

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 8

Clip Analysis: LDA / Contact with finite Friction

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 9

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 10

2. Replace Templates in Installation Directory

3. Inheritance-Feature to create a dependent Copy

4. Constrain the Center of a Hole

5. Temperature-dependent Material Properties

6. Hydraulic Pressure Load

9. Use deformed Model in Creo Parametric

10. Result-Export for Creo-View

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 12

Speed up the Model-Setup / Postprocessing with meaningful “config.pro”-Options

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 13

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 14

Meaningfull Templates are accelerating the Postprocessing

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 15

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 16

Use Inheritance-Feature in Creo Parametric to create a dependent Copy

• Use Flexible Modelling Extension (FMX) for

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 17

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 18

Hole can be constrained in the Center without loosing Flexibility

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 19

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 20

The following Material Properties can be dependent from Temperature:

• Coeff. Of Thermal Expansion

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 21

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 22

Setup Hydraulic Pressure Load with a Symbolic Function

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 23

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 24

Pressfit Simulation of a rotaded Assembly can be performed in 2D

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 25

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 26

Mapkeys are accelerating the Postprocessing

PTC Creo Simulate 3.0: News / 10 "Tips & Tricks" 27