Exploring the Current Practices of Post

Consumer PET Bottles and the Innovative

Applications as a Sustainable Building
Material – A Way Ahead

Arulmalar Ramaraj, B.Arch, M.T.P. Jothilakshmy Nagammal, B. Arch, M. T.P, PhD

[Sathyabama University] [Sathyabama University]

ABSTR ACT
PET stands for polyethylene terephthalate and PET bottles are occupying an indispensable position
in common man’s life. Food processing industries across the world are using PET bottles as effective
containers for storing juice, beer, carbonated and non carbonated drinks. The different parameters
which determine the form of PET bottles during designing, manufacturing and production phases are
cost per unit, need, volume, color, intrinsic velocity, size, shape etc. Irrespective of a wide range of
applications, initiatives in recycling post consumer PET is sporadic. The disposal of PET bottles in the
environment, significantly contributes to ecological imbalance. Interpreting the negative impacts and
adopting the principles of Reuse B and C by Romans, pioneers are searching for rational and technical
solutions to check this issue. In construction industry, hybrid actors are using PET bottles as moulds for
developing alternative blocks. Technocrats are recycling PET products physically in to fibers, pellets
and flakes for partial replacement of fine and coarse aggregates in conventional building materials. This
paper intends to consolidate such initiatives addressing building systems, materials and artifacts. It
discusses an overview of such applications and other intuitive trends which are emerging in Indian
context.

INTRODUCTION
The technology of storing liquid products for transportation, distribution and use is defined as
packaging. Our ancestors used baskets and storage units made of natural fibers and indigenous materials
like stone, earth etc. Use of paper and metal plated containers for such applications dates back to the 10th
century (Packing, 2012). Glass bottles, plastic containers and polyethylene are used predominantly in
today‟s context. Polyethylene terephthalate, a versatile material is playing a primary role in packaging
industry in today‟s context, simultaneously increasing the production process. The drawbacks during the
disposal phase is raising a question, whether the invention is a boon or a bane, revolving around the
societal benefits (Andrady & Neal, 2009) and the negative impacts in the environment (Webb, Arnott,
Crawford, and Ivanova, 2012).

HISTORY

According to the archaeologists, a novel concept, “Post consumer packing material as a resource,
specifically in construction”, is traced from the Hellenistic age. Interpreting the problems posed by
disposal of „amphorae‟, Romans came up with an innovative idea to reuse them in architecture (Will,

Arulmalar Ramaraj is a Research Scholar in the Department of Architecture, Sathyabama University, Chennai, Tamilnadu. Jothilakshmy
Nagammal is a Professor and Head, Department of Architecture, Sathyabama University, Chennai, Tamilnadu.

30th INTERNATIONAL PLEA CONFERENCE 1

16-18 December 2014, CEPT University, Ahmedabad
1977). While doing so, the pointed base pots were either modified or unmodified. Romans classified
reuse as A, B and C (Pena, 2007). When the amphorae were used as a storing unit, it was reuse A. Reuse
B and C, denoting the applications in other fields without modification and with modification
respectively. The beginning of 19th century witnessed similar application of glass and PET bottles in
construction.

AN INSIGHT TO PET

Plastic is a commonly preferred packing material for various goods in today‟s fast moving
contemporary world. They are classified in to seven categories based on recyclability (Society of
plastics, 2013) and polyethylene terephthalate denoted as PET, PETE or PETP ranking number one. The
credit of inventing PET goes to chemists Whitefield and Dickson, the employees of Calico Printer‟s
Association in 1941 and was patented only in 1973 by Wyeth. Semi crystalline thermoplastic polyester,
durable, low gas permeability, chemically and thermally stable, easily processed and handled,
transparent, wear and tear resistant and non biodegradable are the general characteristics of PET. Based
on its versatility, it is primarily used in textiles, films, utility ware, sportswear etc. Food processing
industries prefer PET as it is hygienic, strong, lightweight (Petresin, 2013) and devoid of phthalates,
dioxins, bisphenol A, cadmium, lead and other endocrine disruptors (NAPCOR, 2013). As PET is used
predominantly in the form of bottles for storing carbonated and non carbonated drinks, this paper
addresses to reuse the PET bottles in construction industry.

PET BOTTLE

Cap, neck, shoulder, body, hip and feet are the basic parts of a PET bottle (bottle biology, 2013).
Containers for storing carbonated and non carbonated drinks have different intrinsic velocity, wall
thickness, color and level of copolymer. With respect to the physical form, PET bottles used for storing
carbonated drinks are designed with an additional twist in the neck, thicker wall, higher intrinsic value,
lower copolymer level and a petaloid base (Bristogianni, 2012).

POST CONSUMER PET – REUSING VS RECYCLING

According to the Environmental Protection Agency, recycling, incineration and landfill are the
general ways of disposing plastics are disposed in today‟s context. Each method has its own
disadvantages and drawbacks (Webb et.al, 2013). Its disposal is disturbing the ecological balance,
directly or indirectly affecting the health of all living creatures (Rustagi, Pradhan & Singh, 2011).

Original purpose

Post consumer Reuse A & B (Will, 1977)

PET bottles
Construction field (Shoubi, Shoubi &
Barough, 2013, floating island (Mader,
2011)

, break water
Reuse C (Will, 1977)

Secondary treatment (EPA)

Up cycling or Down cycling

(Jankauskaite, 2008)

Tertiary treatment

Quaternary treatment (EPA)

Figure 1: Reusing and recycling of PET at a macro level

Recycling is classified as primary – re extrusion of pre consumer scrap; secondary or physical or
mechanical treatment; tertiary or chemical treatment where the chemical structure is altered and
quaternary treatment, focusing on energy recovery. Reusing is the most preferred option as the
consumption of energy and resources are always less (Al-Salem & Baeyens, 2009) as in Figure 1.

30th INTERNATIONAL PLEA CONFERENCE 2

16-18 December 2014, CEPT University, Ahmedabad
 Reusing PET bottles for packing continuously is not preferable; however the idea of reusing them
in a different field requires innovation. PET bottle bricks as an alternative building material, a less
energy intensified process, is successful in construction process. A rational and a pragmatic perception is
the requirement in today‟s context to address multifaceted issues simultaneously.

POST CONSUMER PET AND THE AVANT-GARDE PERCEPTIONS

Innovators and researchers are adopting different strategies to reuse and recycle PET bottles. Up
cycling and down cycling are the processes involved in the manufacturing of new products with the
treated PET bottles. While applying such concepts, the consumption of energy and the negative impacts
generated during the production phase need to be kept to the minimum. Investigations on effective
reusing or recycling of such used bottles in the construction sector, marks the beginning of the next
industrial revolution. A holistic, pragmatic approach rich in aesthetic values (Pramar, 1973), as the focal
point, the vision of the architects and environmentalists, technocrats, product designers and artists are
interpreted in Table 1.
Table 1: Unique perceptions
Post consumer PET Hybrid actors - Technocrats- Product designers- Artists-Aesthetic
bottles Holistic Rational approach Innovations expressions
Unmodified / Reuse B Partly objective Objective, Subjective, Partly Subjective,
Modified / Reuse C and subjective, Economical, functional and Aesthetic,
(secondary and tertiary) Aesthetic values Utilitarian Emotional Emotional
Approach Ecocentric Problem solving Transforming the Promoting
overlooked Awareness
Examples Bottle bricks with Partial Screens, lamp Murals, sculpture
different fillers, replacement in shades, planter
PET bottle as a building materials boxes, chandeliers,
filler furniture etc

EXPLORING THE ‘ECOCENTRIC’ APPROACH

„Ecocentric‟ approach is one among the six competing logics of sustainable architectural practices
- built forms are parasitic in nature and revolve around the post consumer waste (Guy &Farmer, 2001).
With self sufficiency and incorporating the principles of a living organism, Reynolds designed
„earthships‟ in 1970s. With his attitude towards post consumer waste as a resource, he developed
building systems by using tires, glass bottles and aluminium cans. Creating the base for a man made
floating island (Mader, 2011) with PET bottles is an exceptional eco centric idea.

Interpreting the role of PET bottles and ‘Reuse B’

Following Reynolds‟ strategies, Froese initiated to construct small structures with PET bottles
firmly held in position with nylon ropes in 2001 (Pachecho, 2013). PET bottle buildings are bio climatic,
cost effective, non brittle, easy maintenance, resistant to abrupt shock loads; strong, durable, versatile,
easy handling and reusable are the characteristics of such built structures (eco tec, 2002). Habitable
spaces, activity centers, learning centers and latrines are constructed using PET bottle bricks at
Honduras, Nigeria, Central America, Philippines and India. Architects and technocrats are searching for
a variety of solutions to reuse post consumer PET bottles in building envelopes for permanently built
forms, temporary structures and interiors as in Figure 2.
With a holistic approach, PET bottle bricks are being made with a variety of filling materials such as
adobe or sand (eco tec, 2002, May 4), liquefied adobe, inorganic waste (Saraswat, 2013), sand and cork
(Shoubi et al, 2013). PET bottles are stacked one on top of the other to build green houses (Alvarado,

30th INTERNATIONAL PLEA CONFERENCE 3

16-18 December 2014, CEPT University, Ahmedabad
2010). When adobe is used as a filling material in PET bottles, it should be tightly compacted with a
stick as well as a compressor and then tightly closed (Can steel, 2014).
A unique brick with PET bottle itself as filler (Mehta and Ellis, 2007) is developed by Lima. Bottles
are effectively used to replace the concrete in roofs and investigations on the monolithic casting of such
discarded transparent containers is in the progress (Radu & Christiana, 2011) and as fillers in slabs
(Pandya, 2012) as shown in Figure 2.
Post consumer PET bottles – Ecocentric approach

Load bearing structure Reuse B (Will, 1977) - cradle to Non load bearing structure
cradle approach

Roof
Sandwich panel (Bristogianni, 2012)
Monolithically casted with
Wall concrete (Radu & Christiana, Thermal insulation mattresses (Intini &
2011) Kuhtz, 2011)

As fillers in vault (The Hindu, Filler in space frames (design boom, 2011)
2013)

PET bottle itself as filler Interior partitions with and without visual
(Mehta & Ellis, 2007) continuity (Webecoist, 2011)

Fillers in bottle bricks – adobe or sand or rubble (eco tec, 2002), inorganic waste (Saraswat,
2013), sand and cork (Shoubi et al, 2013), liquefied adobe and fly ash (Pandya, 2012)

Figure 2: Post consumer PET and „Reuse B‟

They are used as sandwich panels in the constructing emergency shelters (Bristogianni, 2012), as
partitions with and without visual continuity and also as fillers in concrete roofs and space frames
changing the perception of „post consumer packaging waste. PET bottle partitions, designed in Danone
office and in Morimoto restaurant, is a value addition initiative. In Morimoto restaurant, experiencing
the two storied partition integrated with LED lights is a unique idea, bewildering the visitors to think
about the workmanship and material (webecoist, 2011).

PET bottles and ‘Reuse B’ in Indian context

In a country like India the development is uncontrolled, unorganized, use of virgin construction
materials increasing day by day increasing the proportion of the shelterless. Architects and others are
adopting the ideals of ecocentric practices, zoning on the experimentation (Chan,2007) with post
consumer waste. According to Antonoides (1992), materials are the flesh, bones and skin of the built
forms and are categorized based on their influence on the structure and function. Initiators like Yatin
Pandya, Prashant Lingam and Patrick San Francesco are the eye openers to experiment with post
consumer PET bottles in constructing small scale buildings like activity centers, learning and habitable
spaces for social causes in different Indian contexts.

(a) (b) (c)

Figure 3: (a) Front elevation (b) Rear elevation (c) PET bottles as fillers in roofs
A multi activity center at Ahmedabad by Yatin Pandya, Principal architect, Footprints EARTH,
firmly believing in recycling waste as environmental, economic and architectural imperative as one of
the sustainable principles, is playing a vital role in building the centre with waste materials. PET bottle
bricks filled with fly ash are one of the materials for the envelope. A technique of using PET bottles as
fillers in flat roofs and as bricks in walls integrated with aesthetic values as in Figure 3.
Hyderabad based entrepreneurs Prashant Lingam and Aruna, designed a prototype shelter using
bamboo and PET bottle bricks covering an area 225 square feet. Bamboo is used as structural members
and nearly four thousand PET bottles with earth is used in the construction. A typical bonding with
bottle bricks is shown in Figure 4. They are aspiring to promote this as a model house under Indira Awas
Yojana, a scheme initiated by the Government of India for housing.

30th INTERNATIONAL PLEA CONFERENCE 4

16-18 December 2014, CEPT University, Ahmedabad
 (a) (b)
Figure 4: (a) A model house (b) a typical course of PET bottles
In Delhi, a learning centre as shown in Figure 5 was constructed by a non government organization,
„Samarpan Foundation‟ founded by Mr. Partick San Francesco using six thousand PET bottles with a
prefabricated roof. A typical bonding is developed using one liter bottles for walls as well as flooring.
The designed space roofed with simplified steel trusses and prefabricated sheets.

(a) (b) (c)

Figure 5: (a) Alternative courses with PET bottles (b) PET bottles and flooring (c) School
A model house of area 250 square feet is constructed using PET bottle bricks in Chennai. Figure 6
shows the unique bond developed by the Foundation, replacing steel reinforcement with 3cm X 3 cm
Nylon 6, to improve the tensile strength. Techniques for constructing a vault and flat slab using PET
bottles are developed. For the construction of one cubic feet volume of load bearing wall we require
sixteen half liter bottles and nine one liter bottles.

(a) (b) (c) (d)

(e) (f) (g)

Figure 6: (a) Typical course (b) Typical section (c) L Junction (d) 3cm X 3cm nylon 6 for additional
tensile strength (e) Vault construction (f) Flat slab (g) A housing prototype
In our University Campus, we in collaboration with Samarpan developed a typical bond for the
construction of a compound wall as shown in Figure 7. Further, PET bottle columns, where three half
liter bottles and one liter bottles are stacked vertically in a typical course with nylon 6 as the
reinforcement, runs around the column in clockwise and anticlockwise direction as shown is casted at
the Council of Scientific and Industrial Research, Chennai for structural and seismic investigation.

(a) (b) (c)

Figure 7: (a) & (b) Footing for compound wall (c) PET bottle column

ROLE OF PET IN ‘REUSE C’ FOR DEVELOPING ALTERNATIVE BUILDING MATERIALS

Innovative applications of physically recycled post consumer PET

30th INTERNATIONAL PLEA CONFERENCE 5

16-18 December 2014, CEPT University, Ahmedabad
The secondary recycling is classified as physical reprocessing, melting and reforming. Investigations on
mechanical, thermal, electrical, light weight properties of such materials with physically modified PET
granules, pellets, fibers as partial replacement for fine or coarse aggregates are progressing. Such
developed materials and composites are effectively used in pavement and roads.With respect to melting
and reforming or re engineering, PET bottles with inherent interlocking property are designed and
developed by Miniwiz with properties like translucent, insulating, light, strong and mechanically
recyclable material. It is created in order to tackle three environmental problems – waste accumulation,
resource scarcity, greenhouse gas emissions simultaneously (Hegenwald, Ackermann, Neugebaue,
Finkbeiner, 2013). Reusability, recyclability, non toxicity, low volatile compounds, on site production,
scratch resistant, easy maintenance, simple installation and affordability are the distinctive features of
this building material (Miniwiz, 2011).

Post consumer PET bottles – a

sustainable building material Reuse C (Will,1977) Tertiary or chemical recycling

Polymer concrete (Tawfik &

Grinding – fibres, Secondary or mechanical or physical Eskander , 2006)
pellets, granules reprocessing (EPA)

Polymer mortar (Reis., Junior,

Cardosa & Marinho, 2011)
Problem solving approach: Melting & reforming
Investigation on Partial
replacement for fine or coarse
aggregates or cement in Polymer composite tile
Holistic thinking: Polli bricks
conventional building materials (Miniwiz 2011) – Interlocking (Icduygu, Aktas & Altan,
concept 2013)

Soil blocks (Prasad, Nambiar &Abraham, 2012), Fired clay bricks (Kadir & Sarani, 2012), Fly ash based
composite (Vytlacilova, 2011)

Mortar (Rahman, Mahi & Chowdhury , 2013) & Reinforcement of cement mortar (Fraternali, Farina,
Polzone, Pagliusa & Feo, 2013)

Light weight concrete (S.Akcaozoglu, Atis & K.Akcaozoglu 2012), (Angel & Ruiz, 2012); Concrete
(Saikia & Brito, 2013; Siddique, Khatib &Kaur,2008; Irwan, Faisal, Othman & Ibrahim. 2013); Yesilata,
Isiker & Turgut, 2008); (Ramadevi & Manju, 2013), Waste plastic fibre reinforced concrete (Nibudey,
Nagarnaik, Parbat & Pandey, 2013)

Figure 8: Post consumer PET and „Reuse C‟

Innovative applications of chemically recycled PET

Investigations on polymer concrete (Tawfik & Eskander, 2006), polymer mortar (Reis et al, 2011) or
polyester composite tiles (Icduygu et al, 2013) are emerging, where the chemical composition of the
PET is modified through chemical treatment as in figure 8. Applications in the construction of habitable
spaces need to be addressed and impacts created during the treatment and production phase is to be
investigated.

CONCLUSION
The initial perception on the use of PET bottles in construction is changing day by day. A paradigm
which emerged as PET bottle bricks in the construction of load bearing walls with steel trusses and
prefabricated metal sheet is at present witnessing flat roofs with nylon 6 replacing steel reinforcement
and intuitive vault construction. Apart from this ingenious bonds and columns using PET bottles gives a
new direction to think about beams, foundation and simple trusses. With a holistic approach, designing
phase of PET bottles with interlocking property is innovative. Even though research on the effective use
PET in developing new material as an option, solutions exploring the application of PET bottles as
structural members, foundation, retaining walls and secondary elements like street furniture, kerbs, road
dividers, pavements and other landscape elements is to be looked in to. Strategies, approaches and
practices integrating the relationship incorporating a total rethinking on junk as a resourceful building
material integrating waste need to be nurtured and shall be enhanced. The Governing bodies shall

30th INTERNATIONAL PLEA CONFERENCE 6

16-18 December 2014, CEPT University, Ahmedabad
formulate policies to propagate this eco centric approach via appropriate practices, research
investigations on the properties of the materials and construction techniques.

REFERENCES
Akcaozoglu,S. , Atis.C.D and Akcaozoglu,K. (2010), An investigation on the use of shredded waste PET
bottles as aggregates in lightweight concrete, Waste Management, 30, 285-290,
doi:10.1016/j.wasman.2009.09.033
Alvarado,P. (2010, February 3) ,amazing house made entirely of plastic bottles from argentina,
http://www.treehugger.com/sustainable-product-design/amazing-house-made-entirely-of-plastic-
bottles-from-argentina-photos.html, Retrieved, January 18, 2014
Andrady,A.L, Neal,M.A (2009), Applications and societal benefits of plastics,
doi:10.1098/rstb.2008.0304
Andreas Froese, http://www.eco-tecnologia.com/portal/projects, Retrieved May 4, 2014
Angel, f.c. and Ruiz,j.l.v (2012), Manufacturing light weight concrete with pet aggregate, ISRN civil
engineering, 2012, doi:10.5402/2012/287323
Anthony C.Antonoides (1990), Poetics of Architecture: Theory of Design, Van Nostrand Reinhold
Bristogianni,T. Composite structural module out of srPP facings & PET bottle core, (Master thesis),
Available from Tu Delft repository http:/www.repository.tudelft.nl/assets/uuid.../
Bottle biology, www.bottle biology.org/basics, Retrieved December 10, 2013
Can steel be made obsolete in construction?, sustainability, habitat, The Hindu, 28th decemeber 2013,8
Chan, Yanna (2007), Sustainable environment, Rockport publishers Inc
Fraternali,F.,Farina,I., Polzone,C., Pagliuca,E. AND Feo,L. (2013), On the use of r-pet strips for the
reinforcement of cement mortars, Composites:Part B, 46, 207-210,
doi:10.1016/j.compositesb.2012.09.070
Guy,S & Farmer, G (2001), Reinterpreting sustainable architecture: The place of technology, Journal of
Architectural Education, 54/3, ACSA Inc
Hagenwald,J., Ackermann,R., Neugebauer,S., Finkbeiner,M (2013), Innovative product design and
recycling: comparative sustainability assessment of the building material polli-brick , Life Cycle
Management
How to construct houses with plastic bottles, http:/ www.instructables.com/.../New-Innovation-in
Construction-using-Waste-.plastic bottles., Retrieved June 6, 2013
Icduygu,M.G. , Aktas, L. and Altan,M.C (2013), Fabrication of composite tiles from Poly(ethylene
terephthalate) (PET) and Micro-Marble particles reinforced with glass fiber mats: comparison of
recycled and commercial resin, Polymers & Polymer Composites, 21(3),
http://connection.ebscohost.com/
Intini,F.,Kuhtz,S.(2011), Recycling in buildings:an LCA case study of a thermal insulation panel made
of polyester fibre, recycled from post-consumer PET bottles, LCA for Plastics, 306-315,
doi:10.1007/s 11367-011-0267-9
Irwan,J.M., Faisal,S.K., Othman,N., Ibrahim,M.H.W, Asyraf,R.M. & Annas,M.M.K (2013), Advanced
Materials Research, 795, 352-355, doi:10.4028/www.scientific.net/AMR.795.352
Jankauskaite.v, Macijauskas.G, Lygaitis.R (2008), Polyethylene terephthalate waste recycling and
application possibilities: a review, 14 (2), Material Science,http:/
http://www.ktu.lt/lt/mokslas/zurnalai/medz/medz0-93/06%20Polymers
Jongert,J. (2012, December 17) www.superuse.org/story/plastic-bottle-house-nigeria/, retrieved October
10, 2013
Kadir,A.A. and Sarani,N.A. (2012), an overview of wastes recycling in fired clay bricks, Integrated
Journal of Integrated Engineering, 4(2), 53-69, http:/
penerbit.uthm.edu.my/ojs/index.php/ijie/article/view/224/352
Mader,S, Grand launch of recycled plastic bottle eco art island, www.
https://www.kickstarter.com/.../scottmader/grand-launch-of-recycled-plastic bottles, retrieved May
18, 2014
Mehta,R. and Ellis,M. PET brick developed sand, cement and plastic bottles (2007), Clay Tech
magazine, http:/ www.iom3.org/news/, Retrieved Decemeber 11,2013
Miniwiz (2013), Polli- Brick, Your trash our building material, www.miniwiz.com
National Association for PET Container Resources (2014), http:/ www.napcor.com, Retrieved March 27,
2014

30th INTERNATIONAL PLEA CONFERENCE 7

16-18 December 2014, CEPT University, Ahmedabad
Nibudey,R.N., Nagarnail,P.B., Parbat,D.K., Pande, A.M. (2013), Strength and concrete fracture
properties of post consumer waste plastic fibre reinforced concrete, International Journal of Civil
and Infrastructure Engineering and Development, 3(2), retrieved on March 23, 2014
Radu,M., Christiana,C. (2011), Using PET waste for buildings, Civil engineering and installations,73-
80, http:/ www.arhiconoradea.ro/JAES/.../MUNTEAN%20R_Issue3_sept.2011.pdf
Rahman,M.M., Mahi,M.A. AND Chowdhury,T.U.(2013), Utilization of Waste PET Bottles as
Aggregate in Masonry Mortar, 2(11), 1030-1034
Ramadevi,K. and Manju,R. (2012), Experimental investigation on the properties of concrete with plastic
PET (bottle) fibres as fine aggregates, International Journal of Emerging Technology and Advanced
Engineering, 2(6), 42-46, www.ijetae.com/files/Volume2Issue6/Volume2Issue6.html
Reis,J.M.L., Junior,R.C., Cardoso,J.L. AND Marinho,F.J.L. (2011), Effect of recycled pet in the fracture
mechanics of polymer concrete, Construction and Building Materials, 25,
DOI:10.1016/J.CONBUILDMAT.2010.12.056
Rustagi,N.,Pradhan,S.K.,Singh,R (2011),Public health impacts of plastics: An overview. International
Journal of Occupational and Environmental Medicine, 15(3), 100-103, doi;10.4103/
Ryedale District Council, Different plastics, The Society of Plastics Industry, www.ryedale.gov.uk/pdf,
retrieved October 30, 2013
Pachecho,L.D.Q. (2013), Layered elements:reclaiming world wide, waste based and passive
technologies to fight malaria, Reclaim and remake international symposium,
http://www.arch.umd.edu/arch/publication/layered-elements-reclaiming-world-wide-wastebased-
and-passive-technologies-fight-malaria, Retrieved January 16, 2014
Packaging – From Ancient to Modern Times (2012, July 16), http://www.ecopack.bg/en/Packaging-
From-Ancient-to-Modern-Times/23/bnews/, Retrieved May 12, 2014
Pandya, Yatin (2012), Sustainable ? Manifestoes, Indian Architect and Builder, Jasubai publications,
Volume 26 (12), 79-83
Pramar,V.S., (1973), Design fundamentals in architecture, New Delhi, Somaiya publications
Pena.J.T. (2007), Roman amphoras in archaeological record, Cambridge University Press, New York,
http:/www. books.google.co.in/books?isbn=1139464272
Prasad,C.K.S., Nambiar,E.K.K and Abraham,B.M. (2012), Plastic fibre reinforced soil blocks as a
sustainable building material, International Journal of Advancements in Research and Technology,
1(5), http:/www.adsabs.harvard.edu/abs/2012IJART...1e..42P
Saraswat,S., Bottle bricks and the esthetics of sustainability (2013), Pool Magazine, 50-55,
http://issuu.com/poolmagazine/docs/pool35, Retrieved January 16, 2014
Science behind PET, http:/ www.petresin.org, Retrieved October 10, 2013
Shoubi.M.V., Shoubi,M.V and Barough,A.S. (2013), Investigating the application of plastic bottle as a
sustainable material in the building construction, International Journal of Science, Engineering and
Technology Research, 2 (1), 28-34, http:/ ijsetr.org/wp-content/uploads/.../IJSETR-VOL-2-ISSUE-
1-28-34.pdf
Saikia,N. and Brito,J. (2013), Waste Polyetylene terephthalate as an aggregate in concrete, Material
Research, 16(2), doi:10.1590/S1516-14392013005000017
Siddique,R., Khatib,J. and Kaur,I. (2008), Use of recycled plastic in concrete: A review, Waste
Management, 28, 1835-1852, doi:10.1016/j.wasman.2007.09.011
Steph (n.d),14 buildings made from plastic bottles http://webecoist.momtastic.com/2011/05/06/drink-it-
in-14-buildings-made-from-plastic-bottles/ Retrieved March 12,2014
Tawfik,M.E., and Eskander,S.B. (2006), Polymer concrete from marble wastes and recycled
poly(ethylene terephthalate, Journal of Elastomers and Plastics, 38,65-79,
DOI:10.1177/0095244306055569
Vytlacilova,V (2011), Effect of Recycled aggregate on mechanical – physical properties of fly ash based
composites with fibres, World Academy of Science, Engineering and Technology, 29, 1655-1660
Wastes - Resource Conservation - Common Wastes & Materials, http://www.epa.gov/, retrieved on
April 21,2013
Webb,H.K., Arnott,J., Crawford,R.J., and Ivanova,E.P, (2012), Plastic degradation and its environmental
implications with special reference to Poly (ethylene terephthalate), Polymers 2013, 5, 1-18,
doi:10.3390/polym5010001
Will,E.L. (1997), The ancient commercial amphoras, Archaelogy, 30, 264-278,
http://www.promare.org/wp-content/uploads/2012/05/EL-Will-1977-The-Ancient-Commercial-
Amphora.pdf, Retrieved February 12, 2014
Yesilata,B. Isiker,Y. and Turgut,P. (2009), thermal insulation enhancement in concretes by adding waste
PET and rubber pieces, 23, 1878-1882, doi:10.1016/j.conbuildma

30th INTERNATIONAL PLEA CONFERENCE 8

16-18 December 2014, CEPT University, Ahmedabad