Water Soluble Polymers

Download as pdf or txt
Download as pdf or txt
You are on page 1of 9
At a glance
Powered by AI
The document describes various water-soluble polymers and provides information about their chemical nature, physical properties, and test methods.

The document describes types of polymers including sulfonates, special polymers, dispersing agents, thickeners, polyethylene imines, and modified polyethylene imines.

For each polymer product, information is provided about chemical nature, physical form, concentration, molar mass, pH, bulk density, density, and viscosity.

Note Special polymers Special polymers Test methods for Special polymers

This document, or any answers or information provided herein by BASF, does


not constitute a legally binding obligation of BASF. While the descriptions, designs,
Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity
Physical form at 23 °C Water soluble Polymers
Wasserlösliche
Concentration specific for each product, please refer to the
data and information contained herein are presented in good faith and believed
to be accurate, it is provided for your guidance only. Because many factors Euperlan® types
nature form tration [%] [g/mol] density [g/l] [g/cm3] [mPa · s]

Sokalan® types
nature form tration [%] [g/mol] density [g/l] [g/cm3] [mPa · s]

pH-value
Product Specification or Technical Information
DIN 19268
Polymere
may affect processing or application/use, we recommend that you make tests to 10% dry substance in dist. Water
Euperlan HCO Styrene/Acrylate Liquid 44   – – 3** – 1.05 350 Sokalan HP 66 K Vinylpyrrolidone/ Liquid 41   – 36 8 – 1.10 2000
determine the suitability of a product for your particular purpose prior to use. copolymer, modified Vinyl­imidazole copolymer, Bulk density DIN ISO 697
It does not relieve our customers from the obligation to perform a full inspection Euperlan PO/N Liquid 40   – – 2** – 1.03 20 modified
Density DIN 51757, 23 °C
of the products upon delivery or any other obligation.
Sokalan IME Reaction product of Liquid 45   – – 9** – 1.15 20 Viscosity Brookfield, 23 °C, undiluted
NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING imidazole and
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR- Lupasol® types epichlorohydrin
POSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR Lupasol VT Vinylamine/ Liquid 46   – – 3.5 – 1.14 3000
Vinylformamide copolymer Sokalan Soft Polycarboxylate, modified Liquid 30   – – 3** – 1.05 25
INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR
Test methods for Tamol types
INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL Euperlan®
PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, Polyquart® types Physical form at 23 °C
INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF Polyquart Ampho 149 Acrylic copolymer, Liquid 22   – – 6.5** – 1.05 250 Concentration DIN EN ISO 3251
OUR TERMS AND CONDITIONS OF SALE. Na-salt drying to constant mass Lupasol®
Polyquart PRO A Liquid 21   – – 6.5** – 1.03 150 Sulphonic acid condensation products/Sulfonates pH-value DIN 19268
Labelling 10 g product in 100 g solution with Polyquart®
Polyquart Ecoclean Amphoteric modified Liquid 22   – – 5.6** – 1.10 10 Product Chemical Physical pH Dry content Na-sulfate Bulk Density Viscosity dist. water, 20 – 25 °C
Details about the classification and labelling of our products and further advice starch nature form [%] [%] density [g/l] [g/cm3] [mPa · s]
on safe handling are contained in the current safety data sheets. Bulk density DIN ISO 697
Tamol NH 7519 Naphthalene sulphonic acid Powder  9 95 17 550 – – Rheovis®
Polyquart FDI Cationic copolymer Liquid 41   – – 5.5 1.09 2000 Density DIN 51757, 20 °C
condensation product,
Polyquart SD 09 Diallydimethylammonium- Liquid 9   – – 6.5*** – – 8500 Tamol NN 2406 sodium salt Liquid 10 31  6 – 1.17 20 Viscosity Brookfield, 23 °C, undiluted
chloride/
Soilfix®
Propenamide copolymer Na-sulphate BASF Titration method
® = Registered trademark of BASF Tamol NN 2901 Liquid 10 31  1 – 1.14 20
Sokalan®
Soilfix types
®
Tamol NN 4501 Liquid 10 45 0.9 – 1.23 80
Soilfix IR Polyacrylamide, anionic Powder 91   – – 7.5*** 700 – – Tamol®
Tamol NN 7718 Powder  7 95 18 500 – –
BASF SE
Home Care and Formulation Technologies Sokalan® types Tamol NN 8906 Powder  7 95  6 500 – –
Carl-Bosch-Straße 38 Sokalan DCS Mixture of aliphatic Flakes 100   – – 2 – – –
dicarboxylic acids Tamol NN 9104 Powder 10 95  4 500 – –
67056 Ludwigshafen, Germany
Tel.: +49 621 60-0 Sokalan HP 22 G Nonionic copolymer Liquid 20 30000 19 5 – 1.03 300 Tamol NN 9401 Powder 10 95  2 500 – –
www.basf.com/care-chemicals
Sokalan HP 25 Polycarboxylate, modified Liquid 45 3000 16 7.5 – 1.10 10000 Tamol DN Phenol sulfonic acid Powder  7 95  8 450 – –
condensation product,
September 2012 supersedes edition dated March 2011

Sokalan HP 165 Polyvinylpyrrilidone Liquid 30 9000 16 4** – 1.06 20 sodium salt


BTC Europe GmbH Tamol DN 40 Liquid Liquid  7 40  3 – 1.20 80
Maarweg 163/165
Sokalan HP 50 Powder 96 40000 30 4 400 – – Tamol PP Powder  7 95  8 450 – –
50825 Köln, Germany
Tel.: +49 221 9 54 64-0 Sokalan HP 53 Liquid 30 40000 30 6 – 1.07 120
www.btc-europe.com
Sokalan HP 56 K Vinylpyrrolidone/ Liquid 30 70000 32 8 – 1.07 300
Vinylimidazole copolymer
Sokalan HP 56 Granules 97 70000 32 8 450 – –
Granules
08_100712e-01

All figures are approx. values, * * undiluted, DIN 19268 All figures are approx. values, * * undiluted, DIN 19268
*** 1% dry substance in dist. water, DIN 19268
Dispersing agents Dispersing agents Polyethylene imines Test methods for Sokalan types
Physical form at 23 °C
Water soluble Polymers

Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Physical Concentration Molar mass Solvent pH Density Viscosity Charge density
nature form tration [%] [g/mol] density [g/l] [g/cm 3] [mPa · s] nature form tration [%] [g/mol] density [g/l] [g/cm 3] [mPa · s] form [%] [g/mol] [g/cm3] [mPa · s] [meq/g TS] Concentration DIN EN ISO 3251
drying to constant mass
Sokalan CP 5 Maleic acid/acrylic acid Liquid 40 70000 55  8 – 1.30 2000 Sokalan PA 15 Polyacrylic acid, Na-salt Liquid 45 1200 15 8 – 1.31 250 Lupasol FG Liquid 99     800 – 11 1.02    1500 16
copolymer, Na-salt Average Gel Permeation Chromatography
Sokalan CP 5 Granules 92 70000 55  8 580 – – Lupasol G 20 Liquid 99    1300 – 11 1.03    8000 16 Molar mass (calibration with polystyrene sulphonates /
Granules Sokalan PA 20 Liquid 45 2500 20 8 – 1.32 400 or polyacrylates)
water free
K-value 1% dry substance in dist. water (pH 7)
Sokalan CP 45* Liquid 45 70000 55  4 – 1.25 8000 Sokalan PA 20 X-PN Liquid 40 3500 20 4 – 1.18 50 Lupasol G 20 Liquid 50    1300 Water 11 1.08     400 16
pH-value DIN 19268
Sokalan CP 45 Granules 92 70000 55  4 520 – – 10% dry substance in dist. water
Granules* Sokalan PA 25 X Liquid 45 5000 25 8 – 1.30 800 Lupasol G 35 Liquid 50    2000 Water 11 1.08     600 16
Bulk density DIN ISO 697
Sokalan CP 7 Liquid 40 50000 50  8 – 1.30 1500 Sokalan PA 25 CL Granules 92 4000 25 8 600 – – Lupasol G 100 Liquid 50    5000 Water 11 1.08    1100 16
Granules Density DIN 51757, 23 °C
Sokalan CP 7 Granules 92 50000 50  8 660 – – Lupasol HF Liquid 56   25000 Water 11 1.08   11000 17 Viscosity Brookfield, 23 °C, undiluted
Sokalan PA 25 CL PN Liquid 49 4000 25 4 – 1.25 600
Granules NL
Sokalan CP 9 Maleic acid/olefin copolymer, Liquid 25 12000 35 11.5 – 1.10 50 Lupasol P Liquid 50  750000 Water 11 1.09   25000 17
Na-salt Sokalan PA 30 CL Liquid 45 8000 30 8 – 1.34 1300
Sokalan CP 9 Granules 87 12000 35 11.5 480 – – Lupasol PR 8515 Liquid 99    2000 – 11 1.05   14000 16
Sokalan PA 30 CL Granules 92 8000 30 8 620 – –
Granules Granules
Lupasol PS Liquid 33  750000 Water 11 1.08    1700 17 Test methods for Rheovis types
Sokalan CP 10 Polyacrylic acid modified, Liquid 45 4000 20  8.5** – 1.30 500 Sokalan PA 30 CL PN Granules 93 8000 30 4 620 – –
Na-salt Physical form at 23 °C
Granules Lupasol WF Liquid 99   25000 – 11 1.10 >200000 17 Concentration s pecific for each product, please refer to the
Sokalan CP 10 S Polyacrylic acid modified Liquid 50 4000 20  2 – 1.16 150
Sokalan PA 40 Liquid 35 15000 40 7** – 1.24 250 Product Specification or Technical Information
Sokalan CP 12 S Maleic acid/acrylic acid Liquid 50 3000 15  1.5 – 1.23 130 pH-value DIN 19268 1% in dist. water
copolymer Sokalan PA 70 PN Liquid 30 70000 70 5** – 1.17 300 Bulk density DIN ISO 697
Sokalan CP 13 S Polyacrylic acid, modified Liquid 25 20000 50  2 – 1.09 200 Density DIN 51757, 23 °C
Sokalan PA 25 X S Polyacrylic acid Liquid 49 5000 25 2 – 1.20 500 Modified Polyethylene imines
Sokalan CP 42 Polycarboxylate modified, Liquid 40   – 30  6 – 1.20 200 Viscosity Brookfield, 23 °C, undiluted
Na-salt Sokalan PA 80 S Liquid 35 100000 80 2 – 1.14 1000 Product Physical Concentration Molar mass Solvent pH Density Viscosity Charge density
Sokalan CP 42 Granules 97   – 30  6 550 – – form [%] [g/mol] [g/cm3] [mPa · s] [meq/g TS]
Granules
Sokalan PA 110 S Liquid 35 250000 110 2 – 1.14 5000 Sokalan HP 20 Liquid 80 – Water 10 1.13   800 –
Sokalan CP 50 Liquid 40   – 40  5 – 1.20 300
Lupasol PN 50 Liquid 49 1000000 Water  8 1.10  6000 – Test methods for Lupasol types
Sokalan CP 50 Granules 92   – 40  5 600 – – Thickener
Granules Physical form visual, at 20 °C
Lupasol PN 60 Liquid 40 – Water  4 1.14   500 –
Product Chemical Physical Concen- Molar mass pH Bulk Density Viscosity
Sokalan CP 52 PN Liquid 20   – 150  3** – 1.00 1000
[g/mol] density [g/l] [g/cm 3] [mPa · s] Concentration dry content, (constant weight)
nature form tration [%]
Lupasol PN 70 Liquid 50 – Water  9 1.05   600 –
Average Light scattering or GPC
Sokalan CP N40 Polycarboxylate, Na-salt Liquid 43  6000 28  8 – 1.30 700 Rheovis CDE Polyacrylate, modified Dispersion  50 – 3.5** – 1.00  250 Molar mass
Lupasol PO 100 Liquid 50    5000 Methoxypro- 10 1.00   3001) –
Sokalan CP 6655* Liquid 44  8000 30  5.5 – 1.30 3000 panole Water ISO 760, (Karl-Fischer)
Rheovis CSP Pearl 100 – 3.5 ca. 750 – –
Lupasol SK Liquid 24 2000000 Water  7 1.06   700  8 pH-value DIN 19268
Sokalan CP 6340* Liquid 48  8000 30  5 – 1.30 2500 Rheovis FRC Dispersion  55 – 3.5** – 1.05 3000 1% dry content in dist. water

Methacrylic acid/acrylic acid 1)


at 50 °C Density DIN 51757, 20 °C
Sokalan CP 2695 Liquid 43  8000 30  7 – 1.30 1000 Rheovis AT 120 Dispersion  30 – 3 – 1.05   30
copolymer, modified Viscosity Brookfield, 20 °C, undiluted
Sokalan CP 2696 Liquid 48  3500 20  7 – 1.30 700 Rheovis TTA Acrylic copolymer Dispersion  30 – 2** – –   10** Charge density BASF method, 100% dry content (TS), at pH 4.5

All figures are approx. values, * PN = Partly neutralised, All figures are approx. values, ** undiluted, DIN 19268 All figures are approx. values, P N = Partly neutralised,
** undiluted, DIN 19268 ** undiluted, DIN 19268
Dispersing agents Dispersing agents Polyethylene imines Test methods for Sokalan types
Physical form at 23 °C
Water soluble Polymers

Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Physical Concentration Molar mass Solvent pH Density Viscosity Charge density
nature form tration [%] [g/mol] density [g/l] [g/cm 3] [mPa · s] nature form tration [%] [g/mol] density [g/l] [g/cm 3] [mPa · s] form [%] [g/mol] [g/cm3] [mPa · s] [meq/g TS] Concentration DIN EN ISO 3251
drying to constant mass
Sokalan CP 5 Maleic acid/acrylic acid Liquid 40 70000 55  8 – 1.30 2000 Sokalan PA 15 Polyacrylic acid, Na-salt Liquid 45 1200 15 8 – 1.31 250 Lupasol FG Liquid 99     800 – 11 1.02    1500 16
copolymer, Na-salt Average Gel Permeation Chromatography
Sokalan CP 5 Granules 92 70000 55  8 580 – – Lupasol G 20 Liquid 99    1300 – 11 1.03    8000 16 Molar mass (calibration with polystyrene sulphonates /
Granules Sokalan PA 20 Liquid 45 2500 20 8 – 1.32 400 or polyacrylates)
water free
K-value 1% dry substance in dist. water (pH 7)
Sokalan CP 45* Liquid 45 70000 55  4 – 1.25 8000 Sokalan PA 20 X-PN Liquid 40 3500 20 4 – 1.18 50 Lupasol G 20 Liquid 50    1300 Water 11 1.08     400 16
pH-value DIN 19268
Sokalan CP 45 Granules 92 70000 55  4 520 – – 10% dry substance in dist. water
Granules* Sokalan PA 25 X Liquid 45 5000 25 8 – 1.30 800 Lupasol G 35 Liquid 50    2000 Water 11 1.08     600 16
Bulk density DIN ISO 697
Sokalan CP 7 Liquid 40 50000 50  8 – 1.30 1500 Sokalan PA 25 CL Granules 92 4000 25 8 600 – – Lupasol G 100 Liquid 50    5000 Water 11 1.08    1100 16
Granules Density DIN 51757, 23 °C
Sokalan CP 7 Granules 92 50000 50  8 660 – – Lupasol HF Liquid 56   25000 Water 11 1.08   11000 17 Viscosity Brookfield, 23 °C, undiluted
Sokalan PA 25 CL PN Liquid 49 4000 25 4 – 1.25 600
Granules NL
Sokalan CP 9 Maleic acid/olefin copolymer, Liquid 25 12000 35 11.5 – 1.10 50 Lupasol P Liquid 50  750000 Water 11 1.09   25000 17
Na-salt Sokalan PA 30 CL Liquid 45 8000 30 8 – 1.34 1300
Sokalan CP 9 Granules 87 12000 35 11.5 480 – – Lupasol PR 8515 Liquid 99    2000 – 11 1.05   14000 16
Sokalan PA 30 CL Granules 92 8000 30 8 620 – –
Granules Granules
Lupasol PS Liquid 33  750000 Water 11 1.08    1700 17 Test methods for Rheovis types
Sokalan CP 10 Polyacrylic acid modified, Liquid 45 4000 20  8.5** – 1.30 500 Sokalan PA 30 CL PN Granules 93 8000 30 4 620 – –
Na-salt Physical form at 23 °C
Granules Lupasol WF Liquid 99   25000 – 11 1.10 >200000 17 Concentration s pecific for each product, please refer to the
Sokalan CP 10 S Polyacrylic acid modified Liquid 50 4000 20  2 – 1.16 150
Sokalan PA 40 Liquid 35 15000 40 7** – 1.24 250 Product Specification or Technical Information
Sokalan CP 12 S Maleic acid/acrylic acid Liquid 50 3000 15  1.5 – 1.23 130 pH-value DIN 19268 1% in dist. water
copolymer Sokalan PA 70 PN Liquid 30 70000 70 5** – 1.17 300 Bulk density DIN ISO 697
Sokalan CP 13 S Polyacrylic acid, modified Liquid 25 20000 50  2 – 1.09 200 Density DIN 51757, 23 °C
Sokalan PA 25 X S Polyacrylic acid Liquid 49 5000 25 2 – 1.20 500 Modified Polyethylene imines
Sokalan CP 42 Polycarboxylate modified, Liquid 40   – 30  6 – 1.20 200 Viscosity Brookfield, 23 °C, undiluted
Na-salt Sokalan PA 80 S Liquid 35 100000 80 2 – 1.14 1000 Product Physical Concentration Molar mass Solvent pH Density Viscosity Charge density
Sokalan CP 42 Granules 97   – 30  6 550 – – form [%] [g/mol] [g/cm3] [mPa · s] [meq/g TS]
Granules
Sokalan PA 110 S Liquid 35 250000 110 2 – 1.14 5000 Sokalan HP 20 Liquid 80 – Water 10 1.13   800 –
Sokalan CP 50 Liquid 40   – 40  5 – 1.20 300
Lupasol PN 50 Liquid 49 1000000 Water  8 1.10  6000 – Test methods for Lupasol types
Sokalan CP 50 Granules 92   – 40  5 600 – – Thickener
Granules Physical form visual, at 20 °C
Lupasol PN 60 Liquid 40 – Water  4 1.14   500 –
Product Chemical Physical Concen- Molar mass pH Bulk Density Viscosity
Sokalan CP 52 PN Liquid 20   – 150  3** – 1.00 1000
[g/mol] density [g/l] [g/cm 3] [mPa · s] Concentration dry content, (constant weight)
nature form tration [%]
Lupasol PN 70 Liquid 50 – Water  9 1.05   600 –
Average Light scattering or GPC
Sokalan CP N40 Polycarboxylate, Na-salt Liquid 43  6000 28  8 – 1.30 700 Rheovis CDE Polyacrylate, modified Dispersion  50 – 3.5** – 1.00  250 Molar mass
Lupasol PO 100 Liquid 50    5000 Methoxypro- 10 1.00   3001) –
Sokalan CP 6655* Liquid 44  8000 30  5.5 – 1.30 3000 panole Water ISO 760, (Karl-Fischer)
Rheovis CSP Pearl 100 – 3.5 ca. 750 – –
Lupasol SK Liquid 24 2000000 Water  7 1.06   700  8 pH-value DIN 19268
Sokalan CP 6340* Liquid 48  8000 30  5 – 1.30 2500 Rheovis FRC Dispersion  55 – 3.5** – 1.05 3000 1% dry content in dist. water

Methacrylic acid/acrylic acid 1)


at 50 °C Density DIN 51757, 20 °C
Sokalan CP 2695 Liquid 43  8000 30  7 – 1.30 1000 Rheovis AT 120 Dispersion  30 – 3 – 1.05   30
copolymer, modified Viscosity Brookfield, 20 °C, undiluted
Sokalan CP 2696 Liquid 48  3500 20  7 – 1.30 700 Rheovis TTA Acrylic copolymer Dispersion  30 – 2** – –   10** Charge density BASF method, 100% dry content (TS), at pH 4.5

All figures are approx. values, * PN = Partly neutralised, All figures are approx. values, ** undiluted, DIN 19268 All figures are approx. values, P N = Partly neutralised,
** undiluted, DIN 19268 ** undiluted, DIN 19268
Dispersing agents Dispersing agents Polyethylene imines Test methods for Sokalan types
Physical form at 23 °C
Water soluble Polymers

Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Physical Concentration Molar mass Solvent pH Density Viscosity Charge density
nature form tration [%] [g/mol] density [g/l] [g/cm 3] [mPa · s] nature form tration [%] [g/mol] density [g/l] [g/cm 3] [mPa · s] form [%] [g/mol] [g/cm3] [mPa · s] [meq/g TS] Concentration DIN EN ISO 3251
drying to constant mass
Sokalan CP 5 Maleic acid/acrylic acid Liquid 40 70000 55  8 – 1.30 2000 Sokalan PA 15 Polyacrylic acid, Na-salt Liquid 45 1200 15 8 – 1.31 250 Lupasol FG Liquid 99     800 – 11 1.02    1500 16
copolymer, Na-salt Average Gel Permeation Chromatography
Sokalan CP 5 Granules 92 70000 55  8 580 – – Lupasol G 20 Liquid 99    1300 – 11 1.03    8000 16 Molar mass (calibration with polystyrene sulphonates /
Granules Sokalan PA 20 Liquid 45 2500 20 8 – 1.32 400 or polyacrylates)
water free
K-value 1% dry substance in dist. water (pH 7)
Sokalan CP 45* Liquid 45 70000 55  4 – 1.25 8000 Sokalan PA 20 X-PN Liquid 40 3500 20 4 – 1.18 50 Lupasol G 20 Liquid 50    1300 Water 11 1.08     400 16
pH-value DIN 19268
Sokalan CP 45 Granules 92 70000 55  4 520 – – 10% dry substance in dist. water
Granules* Sokalan PA 25 X Liquid 45 5000 25 8 – 1.30 800 Lupasol G 35 Liquid 50    2000 Water 11 1.08     600 16
Bulk density DIN ISO 697
Sokalan CP 7 Liquid 40 50000 50  8 – 1.30 1500 Sokalan PA 25 CL Granules 92 4000 25 8 600 – – Lupasol G 100 Liquid 50    5000 Water 11 1.08    1100 16
Granules Density DIN 51757, 23 °C
Sokalan CP 7 Granules 92 50000 50  8 660 – – Lupasol HF Liquid 56   25000 Water 11 1.08   11000 17 Viscosity Brookfield, 23 °C, undiluted
Sokalan PA 25 CL PN Liquid 49 4000 25 4 – 1.25 600
Granules NL
Sokalan CP 9 Maleic acid/olefin copolymer, Liquid 25 12000 35 11.5 – 1.10 50 Lupasol P Liquid 50  750000 Water 11 1.09   25000 17
Na-salt Sokalan PA 30 CL Liquid 45 8000 30 8 – 1.34 1300
Sokalan CP 9 Granules 87 12000 35 11.5 480 – – Lupasol PR 8515 Liquid 99    2000 – 11 1.05   14000 16
Sokalan PA 30 CL Granules 92 8000 30 8 620 – –
Granules Granules
Lupasol PS Liquid 33  750000 Water 11 1.08    1700 17 Test methods for Rheovis types
Sokalan CP 10 Polyacrylic acid modified, Liquid 45 4000 20  8.5** – 1.30 500 Sokalan PA 30 CL PN Granules 93 8000 30 4 620 – –
Na-salt Physical form at 23 °C
Granules Lupasol WF Liquid 99   25000 – 11 1.10 >200000 17 Concentration s pecific for each product, please refer to the
Sokalan CP 10 S Polyacrylic acid modified Liquid 50 4000 20  2 – 1.16 150
Sokalan PA 40 Liquid 35 15000 40 7** – 1.24 250 Product Specification or Technical Information
Sokalan CP 12 S Maleic acid/acrylic acid Liquid 50 3000 15  1.5 – 1.23 130 pH-value DIN 19268 1% in dist. water
copolymer Sokalan PA 70 PN Liquid 30 70000 70 5** – 1.17 300 Bulk density DIN ISO 697
Sokalan CP 13 S Polyacrylic acid, modified Liquid 25 20000 50  2 – 1.09 200 Density DIN 51757, 23 °C
Sokalan PA 25 X S Polyacrylic acid Liquid 49 5000 25 2 – 1.20 500 Modified Polyethylene imines
Sokalan CP 42 Polycarboxylate modified, Liquid 40   – 30  6 – 1.20 200 Viscosity Brookfield, 23 °C, undiluted
Na-salt Sokalan PA 80 S Liquid 35 100000 80 2 – 1.14 1000 Product Physical Concentration Molar mass Solvent pH Density Viscosity Charge density
Sokalan CP 42 Granules 97   – 30  6 550 – – form [%] [g/mol] [g/cm3] [mPa · s] [meq/g TS]
Granules
Sokalan PA 110 S Liquid 35 250000 110 2 – 1.14 5000 Sokalan HP 20 Liquid 80 – Water 10 1.13   800 –
Sokalan CP 50 Liquid 40   – 40  5 – 1.20 300
Lupasol PN 50 Liquid 49 1000000 Water  8 1.10  6000 – Test methods for Lupasol types
Sokalan CP 50 Granules 92   – 40  5 600 – – Thickener
Granules Physical form visual, at 20 °C
Lupasol PN 60 Liquid 40 – Water  4 1.14   500 –
Product Chemical Physical Concen- Molar mass pH Bulk Density Viscosity
Sokalan CP 52 PN Liquid 20   – 150  3** – 1.00 1000
[g/mol] density [g/l] [g/cm 3] [mPa · s] Concentration dry content, (constant weight)
nature form tration [%]
Lupasol PN 70 Liquid 50 – Water  9 1.05   600 –
Average Light scattering or GPC
Sokalan CP N40 Polycarboxylate, Na-salt Liquid 43  6000 28  8 – 1.30 700 Rheovis CDE Polyacrylate, modified Dispersion  50 – 3.5** – 1.00  250 Molar mass
Lupasol PO 100 Liquid 50    5000 Methoxypro- 10 1.00   3001) –
Sokalan CP 6655* Liquid 44  8000 30  5.5 – 1.30 3000 panole Water ISO 760, (Karl-Fischer)
Rheovis CSP Pearl 100 – 3.5 ca. 750 – –
Lupasol SK Liquid 24 2000000 Water  7 1.06   700  8 pH-value DIN 19268
Sokalan CP 6340* Liquid 48  8000 30  5 – 1.30 2500 Rheovis FRC Dispersion  55 – 3.5** – 1.05 3000 1% dry content in dist. water

Methacrylic acid/acrylic acid 1)


at 50 °C Density DIN 51757, 20 °C
Sokalan CP 2695 Liquid 43  8000 30  7 – 1.30 1000 Rheovis AT 120 Dispersion  30 – 3 – 1.05   30
copolymer, modified Viscosity Brookfield, 20 °C, undiluted
Sokalan CP 2696 Liquid 48  3500 20  7 – 1.30 700 Rheovis TTA Acrylic copolymer Dispersion  30 – 2** – –   10** Charge density BASF method, 100% dry content (TS), at pH 4.5

All figures are approx. values, * PN = Partly neutralised, All figures are approx. values, ** undiluted, DIN 19268 All figures are approx. values, P N = Partly neutralised,
** undiluted, DIN 19268 ** undiluted, DIN 19268
Note Special polymers Special polymers Test methods for Special polymers
This document, or any answers or information provided herein by BASF, does
not constitute a legally binding obligation of BASF. While the descriptions, designs,
Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity
Physical form at 23 °C Water soluble Polymers
Wasserlösliche
Concentration specific for each product, please refer to the
data and information contained herein are presented in good faith and believed
to be accurate, it is provided for your guidance only. Because many factors Euperlan® types
nature form tration [%] [g/mol] density [g/l] [g/cm3] [mPa · s]

Sokalan® types
nature form tration [%] [g/mol] density [g/l] [g/cm3] [mPa · s]

pH-value
Product Specification or Technical Information
DIN 19268
Polymere
may affect processing or application/use, we recommend that you make tests to 10% dry substance in dist. Water
Euperlan HCO Styrene/Acrylate Liquid 44   – – 3** – 1.05 350 Sokalan HP 66 K Vinylpyrrolidone/ Liquid 41   – 36 8 – 1.10 2000
determine the suitability of a product for your particular purpose prior to use. copolymer, modified Vinyl­imidazole copolymer, Bulk density DIN ISO 697
It does not relieve our customers from the obligation to perform a full inspection Euperlan PO/N Liquid 40   – – 2** – 1.03 20 modified
Density DIN 51757, 23 °C
of the products upon delivery or any other obligation.
Sokalan IME Reaction product of Liquid 45   – – 9** – 1.15 20 Viscosity Brookfield, 23 °C, undiluted
NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING imidazole and
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR- Lupasol® types epichlorohydrin
POSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR Lupasol VT Vinylamine/ Liquid 46   – – 3.5 – 1.14 3000
Vinylformamide copolymer Sokalan Soft Polycarboxylate, modified Liquid 30   – – 3** – 1.05 25
INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR
Test methods for Tamol types
INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL Euperlan®
PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, Polyquart® types Physical form at 23 °C
INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF Polyquart Ampho 149 Acrylic copolymer, Liquid 22   – – 6.5** – 1.05 250 Concentration DIN EN ISO 3251
OUR TERMS AND CONDITIONS OF SALE. Na-salt drying to constant mass Lupasol®
Polyquart PRO A Liquid 21   – – 6.5** – 1.03 150 Sulphonic acid condensation products/Sulfonates pH-value DIN 19268
Labelling 10 g product in 100 g solution with Polyquart®
Polyquart Ecoclean Amphoteric modified Liquid 22   – – 5.6** – 1.10 10 Product Chemical Physical pH Dry content Na-sulfate Bulk Density Viscosity dist. water, 20 – 25 °C
Details about the classification and labelling of our products and further advice starch nature form [%] [%] density [g/l] [g/cm3] [mPa · s]
on safe handling are contained in the current safety data sheets. Bulk density DIN ISO 697
Tamol NH 7519 Naphthalene sulphonic acid Powder  9 95 17 550 – – Rheovis®
Polyquart FDI Cationic copolymer Liquid 41   – – 5.5 1.09 2000 Density DIN 51757, 20 °C
condensation product,
Polyquart SD 09 Diallydimethylammonium- Liquid 9   – – 6.5*** – – 8500 Tamol NN 2406 sodium salt Liquid 10 31  6 – 1.17 20 Viscosity Brookfield, 23 °C, undiluted
chloride/
Soilfix®
Propenamide copolymer Na-sulphate BASF Titration method
® = Registered trademark of BASF Tamol NN 2901 Liquid 10 31  1 – 1.14 20
Sokalan®
Soilfix types
®
Tamol NN 4501 Liquid 10 45 0.9 – 1.23 80
Soilfix IR Polyacrylamide, anionic Powder 91   – – 7.5*** 700 – – Tamol®
Tamol NN 7718 Powder  7 95 18 500 – –
BASF SE
Home Care and Formulation Technologies Sokalan® types Tamol NN 8906 Powder  7 95  6 500 – –
Carl-Bosch-Straße 38 Sokalan DCS Mixture of aliphatic Flakes 100   – – 2 – – –
dicarboxylic acids Tamol NN 9104 Powder 10 95  4 500 – –
67056 Ludwigshafen, Germany
Tel.: +49 621 60-0 Sokalan HP 22 G Nonionic copolymer Liquid 20 30000 19 5 – 1.03 300 Tamol NN 9401 Powder 10 95  2 500 – –
www.basf.com/care-chemicals
Sokalan HP 25 Polycarboxylate, modified Liquid 45 3000 16 7.5 – 1.10 10000 Tamol DN Phenol sulfonic acid Powder  7 95  8 450 – –
condensation product,
September 2012 supersedes edition dated March 2011

Sokalan HP 165 Polyvinylpyrrilidone Liquid 30 9000 16 4** – 1.06 20 sodium salt


BTC Europe GmbH Tamol DN 40 Liquid Liquid  7 40  3 – 1.20 80
Maarweg 163/165
Sokalan HP 50 Powder 96 40000 30 4 400 – – Tamol PP Powder  7 95  8 450 – –
50825 Köln, Germany
Tel.: +49 221 9 54 64-0 Sokalan HP 53 Liquid 30 40000 30 6 – 1.07 120
www.btc-europe.com
Sokalan HP 56 K Vinylpyrrolidone/ Liquid 30 70000 32 8 – 1.07 300
Vinylimidazole copolymer
Sokalan HP 56 Granules 97 70000 32 8 450 – –
Granules
08_100712e-01

All figures are approx. values, * * undiluted, DIN 19268 All figures are approx. values, * * undiluted, DIN 19268
*** 1% dry substance in dist. water, DIN 19268
Note Special polymers Special polymers Test methods for Special polymers
This document, or any answers or information provided herein by BASF, does
not constitute a legally binding obligation of BASF. While the descriptions, designs,
Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity
Physical form at 23 °C Water soluble Polymers
Wasserlösliche
Concentration specific for each product, please refer to the
data and information contained herein are presented in good faith and believed
to be accurate, it is provided for your guidance only. Because many factors Euperlan® types
nature form tration [%] [g/mol] density [g/l] [g/cm3] [mPa · s]

Sokalan® types
nature form tration [%] [g/mol] density [g/l] [g/cm3] [mPa · s]

pH-value
Product Specification or Technical Information
DIN 19268
Polymere
may affect processing or application/use, we recommend that you make tests to 10% dry substance in dist. Water
Euperlan HCO Styrene/Acrylate Liquid 44   – – 3** – 1.05 350 Sokalan HP 66 K Vinylpyrrolidone/ Liquid 41   – 36 8 – 1.10 2000
determine the suitability of a product for your particular purpose prior to use. copolymer, modified Vinyl­imidazole copolymer, Bulk density DIN ISO 697
It does not relieve our customers from the obligation to perform a full inspection Euperlan PO/N Liquid 40   – – 2** – 1.03 20 modified
Density DIN 51757, 23 °C
of the products upon delivery or any other obligation.
Sokalan IME Reaction product of Liquid 45   – – 9** – 1.15 20 Viscosity Brookfield, 23 °C, undiluted
NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING imidazole and
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR- Lupasol® types epichlorohydrin
POSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR Lupasol VT Vinylamine/ Liquid 46   – – 3.5 – 1.14 3000
Vinylformamide copolymer Sokalan Soft Polycarboxylate, modified Liquid 30   – – 3** – 1.05 25
INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR
Test methods for Tamol types
INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL Euperlan®
PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, Polyquart® types Physical form at 23 °C
INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF Polyquart Ampho 149 Acrylic copolymer, Liquid 22   – – 6.5** – 1.05 250 Concentration DIN EN ISO 3251
OUR TERMS AND CONDITIONS OF SALE. Na-salt drying to constant mass Lupasol®
Polyquart PRO A Liquid 21   – – 6.5** – 1.03 150 Sulphonic acid condensation products/Sulfonates pH-value DIN 19268
Labelling 10 g product in 100 g solution with Polyquart®
Polyquart Ecoclean Amphoteric modified Liquid 22   – – 5.6** – 1.10 10 Product Chemical Physical pH Dry content Na-sulfate Bulk Density Viscosity dist. water, 20 – 25 °C
Details about the classification and labelling of our products and further advice starch nature form [%] [%] density [g/l] [g/cm3] [mPa · s]
on safe handling are contained in the current safety data sheets. Bulk density DIN ISO 697
Tamol NH 7519 Naphthalene sulphonic acid Powder  9 95 17 550 – – Rheovis®
Polyquart FDI Cationic copolymer Liquid 41   – – 5.5 1.09 2000 Density DIN 51757, 20 °C
condensation product,
Polyquart SD 09 Diallydimethylammonium- Liquid 9   – – 6.5*** – – 8500 Tamol NN 2406 sodium salt Liquid 10 31  6 – 1.17 20 Viscosity Brookfield, 23 °C, undiluted
chloride/
Soilfix®
Propenamide copolymer Na-sulphate BASF Titration method
® = Registered trademark of BASF Tamol NN 2901 Liquid 10 31  1 – 1.14 20
Sokalan®
Soilfix types
®
Tamol NN 4501 Liquid 10 45 0.9 – 1.23 80
Soilfix IR Polyacrylamide, anionic Powder 91   – – 7.5*** 700 – – Tamol®
Tamol NN 7718 Powder  7 95 18 500 – –
BASF SE
Home Care and Formulation Technologies Sokalan® types Tamol NN 8906 Powder  7 95  6 500 – –
Carl-Bosch-Straße 38 Sokalan DCS Mixture of aliphatic Flakes 100   – – 2 – – –
dicarboxylic acids Tamol NN 9104 Powder 10 95  4 500 – –
67056 Ludwigshafen, Germany
Tel.: +49 621 60-0 Sokalan HP 22 G Nonionic copolymer Liquid 20 30000 19 5 – 1.03 300 Tamol NN 9401 Powder 10 95  2 500 – –
www.basf.com/care-chemicals
Sokalan HP 25 Polycarboxylate, modified Liquid 45 3000 16 7.5 – 1.10 10000 Tamol DN Phenol sulfonic acid Powder  7 95  8 450 – –
condensation product,
September 2012 supersedes edition dated March 2011

Sokalan HP 165 Polyvinylpyrrilidone Liquid 30 9000 16 4** – 1.06 20 sodium salt


BTC Europe GmbH Tamol DN 40 Liquid Liquid  7 40  3 – 1.20 80
Maarweg 163/165
Sokalan HP 50 Powder 96 40000 30 4 400 – – Tamol PP Powder  7 95  8 450 – –
50825 Köln, Germany
Tel.: +49 221 9 54 64-0 Sokalan HP 53 Liquid 30 40000 30 6 – 1.07 120
www.btc-europe.com
Sokalan HP 56 K Vinylpyrrolidone/ Liquid 30 70000 32 8 – 1.07 300
Vinylimidazole copolymer
Sokalan HP 56 Granules 97 70000 32 8 450 – –
Granules
08_100712e-01

All figures are approx. values, * * undiluted, DIN 19268 All figures are approx. values, * * undiluted, DIN 19268
*** 1% dry substance in dist. water, DIN 19268
Note Special polymers Special polymers Test methods for Special polymers
This document, or any answers or information provided herein by BASF, does
not constitute a legally binding obligation of BASF. While the descriptions, designs,
Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity
Physical form at 23 °C Water soluble Polymers
Wasserlösliche
Concentration specific for each product, please refer to the
data and information contained herein are presented in good faith and believed
to be accurate, it is provided for your guidance only. Because many factors Euperlan® types
nature form tration [%] [g/mol] density [g/l] [g/cm3] [mPa · s]

Sokalan® types
nature form tration [%] [g/mol] density [g/l] [g/cm3] [mPa · s]

pH-value
Product Specification or Technical Information
DIN 19268
Polymere
may affect processing or application/use, we recommend that you make tests to 10% dry substance in dist. Water
Euperlan HCO Styrene/Acrylate Liquid 44   – – 3** – 1.05 350 Sokalan HP 66 K Vinylpyrrolidone/ Liquid 41   – 36 8 – 1.10 2000
determine the suitability of a product for your particular purpose prior to use. copolymer, modified Vinyl­imidazole copolymer, Bulk density DIN ISO 697
It does not relieve our customers from the obligation to perform a full inspection Euperlan PO/N Liquid 40   – – 2** – 1.03 20 modified
Density DIN 51757, 23 °C
of the products upon delivery or any other obligation.
Sokalan IME Reaction product of Liquid 45   – – 9** – 1.15 20 Viscosity Brookfield, 23 °C, undiluted
NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING imidazole and
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR- Lupasol® types epichlorohydrin
POSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR Lupasol VT Vinylamine/ Liquid 46   – – 3.5 – 1.14 3000
Vinylformamide copolymer Sokalan Soft Polycarboxylate, modified Liquid 30   – – 3** – 1.05 25
INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR
Test methods for Tamol types
INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL Euperlan®
PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, Polyquart® types Physical form at 23 °C
INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF Polyquart Ampho 149 Acrylic copolymer, Liquid 22   – – 6.5** – 1.05 250 Concentration DIN EN ISO 3251
OUR TERMS AND CONDITIONS OF SALE. Na-salt drying to constant mass Lupasol®
Polyquart PRO A Liquid 21   – – 6.5** – 1.03 150 Sulphonic acid condensation products/Sulfonates pH-value DIN 19268
Labelling 10 g product in 100 g solution with Polyquart®
Polyquart Ecoclean Amphoteric modified Liquid 22   – – 5.6** – 1.10 10 Product Chemical Physical pH Dry content Na-sulfate Bulk Density Viscosity dist. water, 20 – 25 °C
Details about the classification and labelling of our products and further advice starch nature form [%] [%] density [g/l] [g/cm3] [mPa · s]
on safe handling are contained in the current safety data sheets. Bulk density DIN ISO 697
Tamol NH 7519 Naphthalene sulphonic acid Powder  9 95 17 550 – – Rheovis®
Polyquart FDI Cationic copolymer Liquid 41   – – 5.5 1.09 2000 Density DIN 51757, 20 °C
condensation product,
Polyquart SD 09 Diallydimethylammonium- Liquid 9   – – 6.5*** – – 8500 Tamol NN 2406 sodium salt Liquid 10 31  6 – 1.17 20 Viscosity Brookfield, 23 °C, undiluted
chloride/
Soilfix®
Propenamide copolymer Na-sulphate BASF Titration method
® = Registered trademark of BASF Tamol NN 2901 Liquid 10 31  1 – 1.14 20
Sokalan®
Soilfix types
®
Tamol NN 4501 Liquid 10 45 0.9 – 1.23 80
Soilfix IR Polyacrylamide, anionic Powder 91   – – 7.5*** 700 – – Tamol®
Tamol NN 7718 Powder  7 95 18 500 – –
BASF SE
Home Care and Formulation Technologies Sokalan® types Tamol NN 8906 Powder  7 95  6 500 – –
Carl-Bosch-Straße 38 Sokalan DCS Mixture of aliphatic Flakes 100   – – 2 – – –
dicarboxylic acids Tamol NN 9104 Powder 10 95  4 500 – –
67056 Ludwigshafen, Germany
Tel.: +49 621 60-0 Sokalan HP 22 G Nonionic copolymer Liquid 20 30000 19 5 – 1.03 300 Tamol NN 9401 Powder 10 95  2 500 – –
www.basf.com/care-chemicals
Sokalan HP 25 Polycarboxylate, modified Liquid 45 3000 16 7.5 – 1.10 10000 Tamol DN Phenol sulfonic acid Powder  7 95  8 450 – –
condensation product,
September 2012 supersedes edition dated March 2011

Sokalan HP 165 Polyvinylpyrrilidone Liquid 30 9000 16 4** – 1.06 20 sodium salt


BTC Europe GmbH Tamol DN 40 Liquid Liquid  7 40  3 – 1.20 80
Maarweg 163/165
Sokalan HP 50 Powder 96 40000 30 4 400 – – Tamol PP Powder  7 95  8 450 – –
50825 Köln, Germany
Tel.: +49 221 9 54 64-0 Sokalan HP 53 Liquid 30 40000 30 6 – 1.07 120
www.btc-europe.com
Sokalan HP 56 K Vinylpyrrolidone/ Liquid 30 70000 32 8 – 1.07 300
Vinylimidazole copolymer
Sokalan HP 56 Granules 97 70000 32 8 450 – –
Granules
08_100712e-01

All figures are approx. values, * * undiluted, DIN 19268 All figures are approx. values, * * undiluted, DIN 19268
*** 1% dry substance in dist. water, DIN 19268
Note Special polymers Special polymers Test methods for Special polymers
This document, or any answers or information provided herein by BASF, does
not constitute a legally binding obligation of BASF. While the descriptions, designs,
Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity
Physical form at 23 °C Water soluble Polymers
Wasserlösliche
Concentration specific for each product, please refer to the
data and information contained herein are presented in good faith and believed
to be accurate, it is provided for your guidance only. Because many factors Euperlan® types
nature form tration [%] [g/mol] density [g/l] [g/cm3] [mPa · s]

Sokalan® types
nature form tration [%] [g/mol] density [g/l] [g/cm3] [mPa · s]

pH-value
Product Specification or Technical Information
DIN 19268
Polymere
may affect processing or application/use, we recommend that you make tests to 10% dry substance in dist. Water
Euperlan HCO Styrene/Acrylate Liquid 44   – – 3** – 1.05 350 Sokalan HP 66 K Vinylpyrrolidone/ Liquid 41   – 36 8 – 1.10 2000
determine the suitability of a product for your particular purpose prior to use. copolymer, modified Vinyl­imidazole copolymer, Bulk density DIN ISO 697
It does not relieve our customers from the obligation to perform a full inspection Euperlan PO/N Liquid 40   – – 2** – 1.03 20 modified
Density DIN 51757, 23 °C
of the products upon delivery or any other obligation.
Sokalan IME Reaction product of Liquid 45   – – 9** – 1.15 20 Viscosity Brookfield, 23 °C, undiluted
NO WARRANTIES OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING imidazole and
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PUR- Lupasol® types epichlorohydrin
POSE, ARE MADE REGARDING PRODUCTS DESCRIBED OR DESIGNS, DATA OR Lupasol VT Vinylamine/ Liquid 46   – – 3.5 – 1.14 3000
Vinylformamide copolymer Sokalan Soft Polycarboxylate, modified Liquid 30   – – 3** – 1.05 25
INFORMATION SET FORTH, OR THAT THE PRODUCTS, DESIGNS, DATA OR
Test methods for Tamol types
INFORMATION MAY BE USED WITHOUT INFRINGING THE INTELLECTUAL Euperlan®
PROPERTY RIGHTS OF OTHERS. IN NO CASE SHALL THE DESCRIPTIONS, Polyquart® types Physical form at 23 °C
INFORMATION, DATA OR DESIGNS PROVIDED BE CONSIDERED A PART OF Polyquart Ampho 149 Acrylic copolymer, Liquid 22   – – 6.5** – 1.05 250 Concentration DIN EN ISO 3251
OUR TERMS AND CONDITIONS OF SALE. Na-salt drying to constant mass Lupasol®
Polyquart PRO A Liquid 21   – – 6.5** – 1.03 150 Sulphonic acid condensation products/Sulfonates pH-value DIN 19268
Labelling 10 g product in 100 g solution with Polyquart®
Polyquart Ecoclean Amphoteric modified Liquid 22   – – 5.6** – 1.10 10 Product Chemical Physical pH Dry content Na-sulfate Bulk Density Viscosity dist. water, 20 – 25 °C
Details about the classification and labelling of our products and further advice starch nature form [%] [%] density [g/l] [g/cm3] [mPa · s]
on safe handling are contained in the current safety data sheets. Bulk density DIN ISO 697
Tamol NH 7519 Naphthalene sulphonic acid Powder  9 95 17 550 – – Rheovis®
Polyquart FDI Cationic copolymer Liquid 41   – – 5.5 1.09 2000 Density DIN 51757, 20 °C
condensation product,
Polyquart SD 09 Diallydimethylammonium- Liquid 9   – – 6.5*** – – 8500 Tamol NN 2406 sodium salt Liquid 10 31  6 – 1.17 20 Viscosity Brookfield, 23 °C, undiluted
chloride/
Soilfix®
Propenamide copolymer Na-sulphate BASF Titration method
® = Registered trademark of BASF Tamol NN 2901 Liquid 10 31  1 – 1.14 20
Sokalan®
Soilfix types
®
Tamol NN 4501 Liquid 10 45 0.9 – 1.23 80
Soilfix IR Polyacrylamide, anionic Powder 91   – – 7.5*** 700 – – Tamol®
Tamol NN 7718 Powder  7 95 18 500 – –
BASF SE
Home Care and Formulation Technologies Sokalan® types Tamol NN 8906 Powder  7 95  6 500 – –
Carl-Bosch-Straße 38 Sokalan DCS Mixture of aliphatic Flakes 100   – – 2 – – –
dicarboxylic acids Tamol NN 9104 Powder 10 95  4 500 – –
67056 Ludwigshafen, Germany
Tel.: +49 621 60-0 Sokalan HP 22 G Nonionic copolymer Liquid 20 30000 19 5 – 1.03 300 Tamol NN 9401 Powder 10 95  2 500 – –
www.basf.com/care-chemicals
Sokalan HP 25 Polycarboxylate, modified Liquid 45 3000 16 7.5 – 1.10 10000 Tamol DN Phenol sulfonic acid Powder  7 95  8 450 – –
condensation product,
September 2012 supersedes edition dated March 2011

Sokalan HP 165 Polyvinylpyrrilidone Liquid 30 9000 16 4** – 1.06 20 sodium salt


BTC Europe GmbH Tamol DN 40 Liquid Liquid  7 40  3 – 1.20 80
Maarweg 163/165
Sokalan HP 50 Powder 96 40000 30 4 400 – – Tamol PP Powder  7 95  8 450 – –
50825 Köln, Germany
Tel.: +49 221 9 54 64-0 Sokalan HP 53 Liquid 30 40000 30 6 – 1.07 120
www.btc-europe.com
Sokalan HP 56 K Vinylpyrrolidone/ Liquid 30 70000 32 8 – 1.07 300
Vinylimidazole copolymer
Sokalan HP 56 Granules 97 70000 32 8 450 – –
Granules
08_100712e-01

All figures are approx. values, * * undiluted, DIN 19268 All figures are approx. values, * * undiluted, DIN 19268
*** 1% dry substance in dist. water, DIN 19268
Dispersing agents Dispersing agents Polyethylene imines Test methods for Sokalan types
Physical form at 23 °C
Water soluble Polymers

Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Chemical Physical Concen- Molar mass K-value pH Bulk Density Viscosity Product Physical Concentration Molar mass Solvent pH Density Viscosity Charge density
nature form tration [%] [g/mol] density [g/l] [g/cm 3] [mPa · s] nature form tration [%] [g/mol] density [g/l] [g/cm 3] [mPa · s] form [%] [g/mol] [g/cm3] [mPa · s] [meq/g TS] Concentration DIN EN ISO 3251
drying to constant mass
Sokalan CP 5 Maleic acid/acrylic acid Liquid 40 70000 55  8 – 1.30 2000 Sokalan PA 15 Polyacrylic acid, Na-salt Liquid 45 1200 15 8 – 1.31 250 Lupasol FG Liquid 99     800 – 11 1.02    1500 16
copolymer, Na-salt Average Gel Permeation Chromatography
Sokalan CP 5 Granules 92 70000 55  8 580 – – Lupasol G 20 Liquid 99    1300 – 11 1.03    8000 16 Molar mass (calibration with polystyrene sulphonates /
Granules Sokalan PA 20 Liquid 45 2500 20 8 – 1.32 400 or polyacrylates)
water free
K-value 1% dry substance in dist. water (pH 7)
Sokalan CP 45* Liquid 45 70000 55  4 – 1.25 8000 Sokalan PA 20 X-PN Liquid 40 3500 20 4 – 1.18 50 Lupasol G 20 Liquid 50    1300 Water 11 1.08     400 16
pH-value DIN 19268
Sokalan CP 45 Granules 92 70000 55  4 520 – – 10% dry substance in dist. water
Granules* Sokalan PA 25 X Liquid 45 5000 25 8 – 1.30 800 Lupasol G 35 Liquid 50    2000 Water 11 1.08     600 16
Bulk density DIN ISO 697
Sokalan CP 7 Liquid 40 50000 50  8 – 1.30 1500 Sokalan PA 25 CL Granules 92 4000 25 8 600 – – Lupasol G 100 Liquid 50    5000 Water 11 1.08    1100 16
Granules Density DIN 51757, 23 °C
Sokalan CP 7 Granules 92 50000 50  8 660 – – Lupasol HF Liquid 56   25000 Water 11 1.08   11000 17 Viscosity Brookfield, 23 °C, undiluted
Sokalan PA 25 CL PN Liquid 49 4000 25 4 – 1.25 600
Granules NL
Sokalan CP 9 Maleic acid/olefin copolymer, Liquid 25 12000 35 11.5 – 1.10 50 Lupasol P Liquid 50  750000 Water 11 1.09   25000 17
Na-salt Sokalan PA 30 CL Liquid 45 8000 30 8 – 1.34 1300
Sokalan CP 9 Granules 87 12000 35 11.5 480 – – Lupasol PR 8515 Liquid 99    2000 – 11 1.05   14000 16
Sokalan PA 30 CL Granules 92 8000 30 8 620 – –
Granules Granules
Lupasol PS Liquid 33  750000 Water 11 1.08    1700 17 Test methods for Rheovis types
Sokalan CP 10 Polyacrylic acid modified, Liquid 45 4000 20  8.5** – 1.30 500 Sokalan PA 30 CL PN Granules 93 8000 30 4 620 – –
Na-salt Physical form at 23 °C
Granules Lupasol WF Liquid 99   25000 – 11 1.10 >200000 17 Concentration s pecific for each product, please refer to the
Sokalan CP 10 S Polyacrylic acid modified Liquid 50 4000 20  2 – 1.16 150
Sokalan PA 40 Liquid 35 15000 40 7** – 1.24 250 Product Specification or Technical Information
Sokalan CP 12 S Maleic acid/acrylic acid Liquid 50 3000 15  1.5 – 1.23 130 pH-value DIN 19268 1% in dist. water
copolymer Sokalan PA 70 PN Liquid 30 70000 70 5** – 1.17 300 Bulk density DIN ISO 697
Sokalan CP 13 S Polyacrylic acid, modified Liquid 25 20000 50  2 – 1.09 200 Density DIN 51757, 23 °C
Sokalan PA 25 X S Polyacrylic acid Liquid 49 5000 25 2 – 1.20 500 Modified Polyethylene imines
Sokalan CP 42 Polycarboxylate modified, Liquid 40   – 30  6 – 1.20 200 Viscosity Brookfield, 23 °C, undiluted
Na-salt Sokalan PA 80 S Liquid 35 100000 80 2 – 1.14 1000 Product Physical Concentration Molar mass Solvent pH Density Viscosity Charge density
Sokalan CP 42 Granules 97   – 30  6 550 – – form [%] [g/mol] [g/cm3] [mPa · s] [meq/g TS]
Granules
Sokalan PA 110 S Liquid 35 250000 110 2 – 1.14 5000 Sokalan HP 20 Liquid 80 – Water 10 1.13   800 –
Sokalan CP 50 Liquid 40   – 40  5 – 1.20 300
Lupasol PN 50 Liquid 49 1000000 Water  8 1.10  6000 – Test methods for Lupasol types
Sokalan CP 50 Granules 92   – 40  5 600 – – Thickener
Granules Physical form visual, at 20 °C
Lupasol PN 60 Liquid 40 – Water  4 1.14   500 –
Product Chemical Physical Concen- Molar mass pH Bulk Density Viscosity
Sokalan CP 52 PN Liquid 20   – 150  3** – 1.00 1000
[g/mol] density [g/l] [g/cm 3] [mPa · s] Concentration dry content, (constant weight)
nature form tration [%]
Lupasol PN 70 Liquid 50 – Water  9 1.05   600 –
Average Light scattering or GPC
Sokalan CP N40 Polycarboxylate, Na-salt Liquid 43  6000 28  8 – 1.30 700 Rheovis CDE Polyacrylate, modified Dispersion  50 – 3.5** – 1.00  250 Molar mass
Lupasol PO 100 Liquid 50    5000 Methoxypro- 10 1.00   3001) –
Sokalan CP 6655* Liquid 44  8000 30  5.5 – 1.30 3000 panole Water ISO 760, (Karl-Fischer)
Rheovis CSP Pearl 100 – 3.5 ca. 750 – –
Lupasol SK Liquid 24 2000000 Water  7 1.06   700  8 pH-value DIN 19268
Sokalan CP 6340* Liquid 48  8000 30  5 – 1.30 2500 Rheovis FRC Dispersion  55 – 3.5** – 1.05 3000 1% dry content in dist. water

Methacrylic acid/acrylic acid 1)


at 50 °C Density DIN 51757, 20 °C
Sokalan CP 2695 Liquid 43  8000 30  7 – 1.30 1000 Rheovis AT 120 Dispersion  30 – 3 – 1.05   30
copolymer, modified Viscosity Brookfield, 20 °C, undiluted
Sokalan CP 2696 Liquid 48  3500 20  7 – 1.30 700 Rheovis TTA Acrylic copolymer Dispersion  30 – 2** – –   10** Charge density BASF method, 100% dry content (TS), at pH 4.5

All figures are approx. values, * PN = Partly neutralised, All figures are approx. values, ** undiluted, DIN 19268 All figures are approx. values, P N = Partly neutralised,
** undiluted, DIN 19268 ** undiluted, DIN 19268

You might also like