Scribd Logo
Upload

Welcome to Scribd!

  • 188 views

    Create Ccopt Macro Model Spec

    Uploaded by

    sagar
    This command allows you to view or edit the pin insertion delays for a CCOpt macro model specification. It converts the macro model information from an EDI-CTS specification file into a TCL format file that can then be integrated into other scripts. The command outputs a macro model specification file that contains the pin insertion delay information and that can be used with the create_ccopt_clock_tree_spec command.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Create Ccopt Macro Model Spec

    Uploaded by

    sagar
    188 views1 page
    This command allows you to view or edit the pin insertion delays for a CCOpt macro model specification. It converts the macro model information from an EDI-CTS specification file into a TCL format file that can then be integrated into other scripts. The command outputs a macro model specification file that contains the pin insertion delay information and that can be used with the create_ccopt_clock_tree_spec command.

    Original Description:

    command-innovus

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This command allows you to view or edit the pin insertion delays for a CCOpt macro model specification. It converts the macro model information from an EDI-CTS specification file into a TCL format file that can then be integrated into other scripts. The command outputs a macro model specification file that contains the pin insertion delay information and that can be used with the create_ccopt_clock_tree_spec command.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    188 views1 page

    Create Ccopt Macro Model Spec

    Uploaded by

    sagar
    This command allows you to view or edit the pin insertion delays for a CCOpt macro model specification. It converts the macro model information from an EDI-CTS specification file into a TCL format file that can then be integrated into other scripts. The command outputs a macro model specification file that contains the pin insertion delay information and that can be used with the create_ccopt_clock_tree_spec command.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 1

    create_ccopt_macro_model_spec

    create_ccopt_macro_model_spec
    [-help]
    [-ckSpec]
    [-ediCtsSpecForMacroModels fileName ]
    [-file filename ]
    The macro model information for CCOpt can be retrieved by providing the name of the specification file that contains the macro
    model information. For this, you can use the-edi_cts_spec_for_macro_models parameter of
    the set_ccopt_mode command. Use the create_ccopt_macro_model_spec command to view, or edit,
    the pin insertion delays for CCOpt derived from the macro model specification. This command allows the macro model to
    CCOpt pin insertion delay conversion in a way that gives you the pin insertion delay in a TCL format that you can edit and then
    integrate into your scripts.
    Note : To run this command, ensure that the design is loaded and the specification file is available. Once the macro model
    specification file is created, to use this file, you only need to source it after the running
    the create_ccopt_clock_tree_spec command.

    Parameters
    -help Outputs a brief description that includes type and default information for
    each create_ccopt_macro_model_spec parameter. For a detailed
    description of the command and all of its parameters, use the man
    command: man create_ccopt_macro_model_spec.
    -ckSpec Uses the CCOpt CTS specification file for macro model information.

    -ediCtsSpecForMacroModels fileName
    Specifies the EDI-CTS specification file for macro model information.
    - Exports the CCOpt macro model spec to the specified file.
    filefilename

    Example

     The following command is used to create the macro model specification file, CCOPT_MM, using the EDI-CTS specification
    file, CTSSPEC , in the CCOpt-CTS and CCOpt flow:
    create_ccopt_macro_model_spec -ediCTSSpecForMacorModels CTSSPEC -file
    CCOPT_MM

     The following command is used to create the macro model specification file, CCOPT_MM, in the CCOpt-CTS flow driven
    directly by the EDI-CTS specification file (CTSSPEC ):
    create_ccopt_macro_model_spec -ediCTSSpecForMacorModels CTSSPEC -file
    CCOPT_MM -ckSpec

    You might also like