Work Power Energy

Lecture 10
Work, Power
and
Potential energy
Pre-reading: KJF §10.1 and 10.2
What is Energy?
Energy is needed to do useful work.
Energy can move things, heat things up, cool them
down, join things, break things, cut things, make
noise, make light, and power our electronics, etc.
Energy can be changed from one form to another.
KJF §10.1–10.2 2
kinetic energy
gravitational potential energy
elastic potential energy
thermal energy
3
Energy
kinetic energy – energy of motion
K = ½ mv2
potential energy – stored energy
U = mgh (gravity)
Kinetic energy and potential energy added

together are called Mechanical Energy.
KJF §10.5 4
Law of Conservation of Energy
Energy cannot be created or destroyed
(i.e. it is "conserved")
It can only be changed from one form to another

OR
In an isolated system — one where there is no
energy transfer into or out of the system — the
total energy Etot is conserved.
KJF §10.3 5
WORK
KJF §10.4
6
What is Work?
Work is the process of transferring energy from
the environment to a system, or from the system to
the environment, by the application of forces.
KJF §10.2 7
What is Work?
“Doing work” means using a force to
• transfer energy from one object to another, or
• convert energy from one form to another.
Work (W) is equal to the amount of energy

transferred or converted by the force.
Work is a scalar. S.I. unit is also the joule (J).
If force is constant then
W = Fs cos θ
where F is applied force, s is object's displacement while
the force is applied and θ is angle between applied force
and displacement.
8
Work and Kinetic Energy (1)
Consider a single constant force F acting on a body
causing a change in kinetic energy only. Suppose it
moves in the x–direction and the force acts at angle θ to
that direction.
KJF §10.5 9
If body moves displacement d = xf – xi . From the

motion equations;
# vf2 = vi2 + 2axd# where d = xf – xi
# i.e.# 2axd = (vf2 – vi2)
But the K.E. is changing; # ∆K = Kf – Ki
# = ½mvf2 – ½mvi2 = ½m(vf2 – vi2) = ½m × 2axd
KJF §10.5 10
Work and Kinetic Energy (2)
Therefore" ∆K = ½ m × 2axd = maxd = Fx d
= F cosθ d
But our definition of work was “change in
energy” and in this case the only change is in
kinetic energy.
Therefore the work done is
W = ∆K = Fd cosθ
KJF §10.4 11
Sign Convention for Work
• Work can be negative! (i.e. Energy will be

transferred from the body). ("signed scalar")
• If the applied force is causing the object to
increase in energy, then the work is positive,
e.g. work done by legs walking upstairs.
• If the applied force is causing the object to
decrease in energy, then work is negative,
e.g. work done by legs walking downstairs.
12
Forces that do no work
• If the object does not move, no work is done
KJF §10.2 13
Forces that do no work

• If the force is perpendicular to the displacement,
then the force does no work
KJF §10.2 14
Work-Energy Theorem
Work is a scalar, i.e. the work done by the individual
forces can be added together "arithmetically":
W = W1 + W2 + …
Work-Energy Theorem: (a special case of the law
of conservation of energy) The change in kinetic
energy of a system equals the sum of work done by
all the individual forces on the system:
∆K = ∑W
Strictly speaking this theorem applies to rigid ("non-squishy") objects
KJF §10.3 15
Example: KJF problem 10.11

A 20 g plastic ball is moving to the left at 30 m/s.
How much work must be done on the ball to cause
it to move to the right at 30 m/s?
[0 J]
16
What is Power?
Power means the rate at which a force does work
on an object.
Instantaneous power:
Also remember that W = Fs cosθ, so if F and θ are constant
KJF §10.10 17
Units
Units: watt (W) = joule.second–1 (J.s–1)
[1 horsepower (hp) = 746 W]
Note! Do not confuse the unit watt (W) with the

algebraic symbol for work (W).
The 1st is the unit for power P, the 2nd represents an energy and has
joules (J) as its unit.
Algebraic Unit
Symbol Symbol
Energy, Work K, U, W… J
Power P W
18
Problem
The loaded cab of an elevator has a mass of
3.0 × 103 kg and moves 210m up the shaft in 23s
at constant speed.
At what average rate does the force from the cable
do work on the cab?
[2.7 × 105 W]
19
Problem 2 (KJF example 10.17)
Your 1500 kg car is behind a truck travelling at

90 km h–1 (25 m s–1). To pass it, you speed up to
120 km h–1 (33 m s–1) in 6.0 s.
What engine power is required to do this?
[58 kW]
20
Gravitational Potential Energy
Stored energy due to height in a gravitational field:
G.P.E. or U = mgh
where m is mass (kg) and h is height above the
origin level (m).
The origin position (h = 0) can be freely chosen
U is always relative to some reference level or position.
Example: A 1.0 kg mass is held 10 m above the ground.
Find its G.P.E. relative to the ground.
[U = 1.0 kg × 9.8 ms–2 × 10 m = 98 J]
KJF §10.6 21
Gravitational Potential Energy
Two bodies are attracted because of gravity caused by their

mass, so we have to do work W to push them apart.
When we do this, energy is transferred to the system — called
gravitational potential energy, U. Near earth's surface U = mgh
U is a property of the whole system e.g. system is earth + ball,
but usually we simplify and say "the ball has potential energy"
KJF §10.6 22
Work done by weight (gravity) on the ball
as it falls a distance h towards earth is
W = Fs cos θ = mg × Δh × cos 0° = mgΔh
" i.e. work done by weight (gravity) Δh
= minus the change in U
Only the change in height is significant

⇒ we are free to choose any reference
level we like where U=0
23
PE is independent of path
Because gravitational potential energy depends only
on the height of the object above the reference level,
the potential energy does not
depend on the path taken.
In both cases the G.P.E increased
by the same amount: mgh
KJF §10.6 24
Conservative Forces
If work done by a force in moving an

object from A to B does NOT depend
on the path taken, we call it a
conservative force (e.g. gravity, ideal
springs).
An object moving under the influence of a conservative
force always conserves mechanical energy:
ME = Ki + Ui = Kf + Uf
EVERY conservative force has “potential energy” associated with it

(e.g. gravity → gravitational P.E., spring force → elastic P.E. ).
KJF §10.6 25
Forces like friction which dissipate energy instead of storing

it are non-conservative forces.
If an object moves in a closed loop under

the influence of a conservative force, the
total work done is ZERO.
Work done in moving an object from A → B under the

influence of a conservative force is the exact negative of work
done in going from B → A, i.e. reversible
WAB = –WBA
e.g. Work done by gravity going upstairs and back downstairs again.
26
NEXT LECTURE
Conservation of mechanical energy
Read: KJF §10.6

Work Power Energy

Uploaded by

Copyright:

Available Formats

Work Power Energy

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Work Power Energy

Uploaded by

Copyright:

Available Formats

Lecture 10

gravitational potential energy

elastic potential energy

Kinetic energy and potential energy added

It can only be changed from one form to another

Work (W) is equal to the amount of energy

If body moves displacement d = xf – xi . From the

Sign Convention for Work

• Work can be negative! (i.e. Energy will be

Forces that do no work

Example: KJF problem 10.11

Also remember that W = Fs cosθ, so if F and θ are constant

Note! Do not confuse the unit watt (W) with the

Problem 2 (KJF example 10.17)

Your 1500 kg car is behind a truck travelling at

Gravitational Potential Energy

Two bodies are attracted because of gravity caused by their

Only the change in height is significant

If work done by a force in moving an

EVERY conservative force has “potential energy” associated with it

Forces like friction which dissipate energy instead of storing

If an object moves in a closed loop under

Work done in moving an object from A → B under the

Conservation of mechanical energy

Read: KJF §10.6

You might also like