Scribd Logo
Upload

Welcome to Scribd!

  • 277 views

    3.2.1.7 Packet Tracer - Configuring VLANs Instructions

    Uploaded by

    Viny Alexander Mendieta
    Laboratorio Cisco 3.2.1.7

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    3.2.1.7 Packet Tracer - Configuring VLANs Instructions

    Uploaded by

    Viny Alexander Mendieta
    277 views8 pages
    Laboratorio Cisco 3.2.1.7

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    Laboratorio Cisco 3.2.1.7

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    277 views8 pages

    3.2.1.7 Packet Tracer - Configuring VLANs Instructions

    Uploaded by

    Viny Alexander Mendieta
    Laboratorio Cisco 3.2.1.7

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 8

    Packet Tracer – Configuring VLANs

    Topology

    Addressing Table

    Device Interface IP Address Subnet Mask VLAN

    PC1 NIC 172.17.10.21 255.255.255.0 10


    PC2 NIC 172.17.20.22 255.255.255.0 20
    PC3 NIC 172.17.30.23 255.255.255.0 30
    PC4 NIC 172.17.10.24 255.255.255.0 10
    PC5 NIC 172.17.20.25 255.255.255.0 20
    PC6 NIC 172.17.30.26 255.255.255.0 30

    Objectives
    Part 1: Verify the Default VLAN Configuration
    Part 2: Configure VLANs
    Part 3: Assign VLANs to Ports

    Background
    VLANs are helpful in the administration of logical groups, allowing members of a group to be easily moved,
    changed, or added. This activity focuses on creating and naming VLANs, and assigning access ports to
    specific VLANs.

    © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 1 of 3
    Packet Tracer – Configuring VLANs

    Part 1: View the Default VLAN Configuration


    Step 1: Display the current VLANs.
    On S1, issue the command that displays all VLANs configured. By default, all interfaces are assigned to
    VLAN 1.

    Step 2: Verify connectivity between PCs on the same network.


    Notice that each PC can ping the other PC that shares the same network.
     PC1 can ping PC4
     PC2 can ping PC5
     PC3 can ping PC6

    © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 2 of 3
    Packet Tracer – Configuring VLANs

    Pings to PCs in other networks fail.


    What benefit will configuring VLANs provide to the current configuration?

    Prevenir que haya mucho tráfico de broadcast y que todo sea un solo dominio de colisión, necesitamos
    muchos dominios de colisión para prevenir muchas tormentas de broadscats

    Part 2: Configure VLANs


    Step 1: Create and name VLANs on S1.
    Create the following VLANs. Names are case-sensitive:
     VLAN 10: Faculty/Staff
     VLAN 20: Students
     VLAN 30: Guest(Default)
     VLAN 99: Management&Native

    © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 3 of 3
    Packet Tracer – Configuring VLANs

    Step 2: Verify the VLAN configuration.


    Which command will only display the VLAN name, status, and associated ports on a switch?

    © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 4 of 3
    Packet Tracer – Configuring VLANs

    Step 3: Create the VLANs on S2 and S3.


    Using the same commands from Step 1, create and name the same VLANs on S2 and S3.

    © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 5 of 3
    Packet Tracer – Configuring VLANs

    Step 4: Verify the VLAN configuration.

    Part 3: Assign VLANs to Ports


    Step 1: Assign VLANs to the active ports on S2.
    Assign the VLANs to the following ports:
     VLAN 10: Fast Ethernet 0/11
     VLAN 20: Fast Ethernet 0/18
     VLAN 30: Fast Ethernet 0/6

    © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 6 of 3
    Packet Tracer – Configuring VLANs

    Step 2: Assign VLANs to the active ports on S3.


    S3 uses the same VLAN access port assignments as S2.

    Step 3: Verify loss of connectivity.


    Previously, PCs that shared the same network could ping each other successfully. Try pinging between PC1
    and PC4. Although the access ports are assigned to the appropriate VLANs, were the pings successful?
    Why?
    No, los pings fallaron porque los puertos entre los switches están en VLAN 1 y PC1 y PC4 en VLAN 10
    What could be done to resolve this issue?
    Configurar los puertos entre los switches como puertos troncales.

    © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 7 of 3
    Packet Tracer – Configuring VLANs

    Suggested Scoring Rubric

    Question Possible Earned


    Activity Section Location Points Points

    Part 1: Verify the Default VLAN Configuration Step 2 4


    Part 2: Configure VLANs Step 2 2
    Part 3: Assign VLANs to Ports Step 3 4
    Packet Tracer Score 90
    Total Score 100

    © 2013 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public. Page 8 of 3

    You might also like