Land Drilling Rig

Download as pdf or txt
Download as pdf or txt
You are on page 1of 3
At a glance
Powered by AI
The passage describes different types of drilling rigs including electric-drive, combined drive, and mechanical drive rigs. It also provides technical specifications for several drilling rig models.

Electric-drive, combined drive, and mechanical drive rigs are described. Electric-drive rigs can be AC or DC models. Combined drive rigs are powered by diesel engines and chain drives. Mechanical drive rigs use diesel engines and belt drives.

Technical specifications including nominal drilling depth, maximum hook load, drawwork power, wirelines/hoisting system, mud pump power, rotary opening diameter, drill floor height, and mast type/height are provided for several drilling rig models.

LAND DRLLING RIG

Land Drilling Rig


Land drilling rig is used in exploration of oil and gas well. The components and structure of drilling rig conform to API Spec 4F, 7K, 8A, and acquires the
certificate of authority to use the official API monogram.

Electric Drive Drilling Rig


There’re two models of electric-drive drilling rig, i.e. DC electric-drive drilling rig
( AC-SCR-DC), and AC electric-drive drilling rig (AC-DC-AC).Usually one complete diesel
generator as the power source will be equipped together with drilling rig. K type mast,
self-lifting or spin-lifting substructure, are normal configuration for integral raise. Electric-drive
drilling rig realizes the concentrative control and automatic bit- feeding function through
driller’s control cabin. The auxiliary brake of AC-VFD drilling rig is dynamic brake. The
drawworks adopts hydraulic disc brake and the EATON auxiliary brake etc. Mud pump,
drawworks, and rotary table can be driven by independent motors.

Combined Drive Drilling Rig


Combined drive drilling rig, is driven by power from diesel engines and integrated chain
compound box. The drawworks of drilling rig adopts sealed chain transmission with
hydraulic disc brake, uniformly driven as mud pump. Rotary table is driven by AC frequency

converter and equipped with VFD system. K type mast is adopted for combined drive drilling rig, and substructure adopts box on box type or
spin-lifting type. Mast and substructure of rig are installed at ground level and raised integrally.
Mechanical Drive Drilling Rig
Mechanical drive drilling rig, is driven by power from diesel engines and belt compound device. The drawworks adopts sealed chain driving with band
brake system. Rotary table, drawworks, mud pump are driven uniformly. A type or K type mast will be adopted for mechanical drive drilling rig, and
substructure adopts box on box type or spin-lifting type. Mast is installed at ground level and raised integrally.
Technical Specifications of Drilling Rig

Model JD-ZJ20 JD-ZJ30 JD-ZJ40A JD-ZJ40B JD-ZJ50 JD-ZJ70

Nominal Drilling Depth


(114mm DP) 6,600 (2,000) 9,900 (3,000) 13,100 (4,000) 16,400 (5,000) 23,000 (7,000)
ft (m)
Max. Hook Load 303,500 382,000 505,800 708,200 1,011,600
lbf(KN) (1,350) (1,700) (2,250)) (3,150) (4,500)
Drawwork Rated
650 (484) 1,000 (735) 1,500 (1,100) 2,000 (1,470)
Power hp(kW)
Wirelines of Hoisting
4×5 5×6 6×7
System
Diameter of Wire Rope
1-1/8 (28.5) 1-1/4 (32) 1-3/8 (35) 1-1/2 (38)
in(mm)
One Mud Pump Rated 1,300 (960)
800 (590) 1,000 (735) 1,300 (960) 1,600(1,180)
Power hp(kW) 1,600(1,180)
Rotary Opening
20-1/2 (520) 27-1/2 (698.5) 37-1/2 (952.5)
Diameter in(mm)

Drill Floor Height ft(m) 11.5(3.5), 15(4.5) 16(4.8) 25(7.5) 30 (9) 30(9) , 35(10.5)

Mast Type and Mast A-shaped Mast Front- open K type Mast
Height ft(m) 112(34) 138 (42) 141 (43) 148 (45)
Address: No.7, Aucma Street, Laishan District, Yantai, Shandong, P.R.China 264003
Tel: +86-535-6723520 6723201
Fax: +86-535-6723171 6723272
E-mail: [email protected]; [email protected]
Website: Http://www.jereh-oilfield.com

You might also like