Monitor - M 211: (Carbon Steel, Hot Dip Galvanized) Technical Data

MONITOR - M 211
(CARBON STEEL, HOT DIP GALVANIZED)
TECHNICAL DATA
MODEL M 211
NOMINAL SIZE 65 MM (2.5”)
MAX. SERVICE 12 Bar (175 PSI)
PRESSURE
MAXIMUM FLOW 600 GPM (2270 LPM)
FACTORY 35 BAR (500 PSI)
HYDROSTATIC
TEST PRESSURE
SWIVEL JOINT Bronze to IS 318/ASTM B62
with double row of Stainless
Steel Ball Bearing and Grease
Fittings
NOZZLE THRUST Flow in LPM X √Pressure
REACTION IN Kg. in Kg./sq.cm. 0.0228 The monitor has large flow capability and can be
manually operated by a single fire fighter. The design
INLET CONNECTION 2.5” OR 3” OR 4” (65 OR ensures to prevent jet reaction forces from effecting
80 OR 100 MM) Flange to the horizontal and vertical position of the monitor.
ANSI B16.5 # 150, R.F. The monitor has the ability for 360 deg. continuous
OUTLET CONNECTION 2.5” BSP (M) horizontal rotation and angle of elevation +90 deg.
above horizontal and -45 deg. below horizontal.
MONITOR ELEVATION 90 Deg. above horizontal &
45 Deg. below horizontal The water vanes in discharge tube reduces the
turbulence and friction loss, thus increasing the
MONITOR ROTATION 360 Deg. continuous nozzle performance to achieve greater range. To
MONITOR MOVEMENT Handle with twist lock ensure desired performance, the friction loss through
monitor must be considered while selecting the nozzle
FINISH Red to RAL 3000 and the flow through the monitor with reference to
WEIGHT (Approx) 29 Kg available base pressure at inlet of the monitor. For
flow and jet reach data refer monitor nozzle data
ORDERING Specify Monitor Model sheet.
INFORMATION and Inlet Flange Size
DESCRIPTION
The monitor Model- M 211 is durable manual controlled
monitor for fixed installation as well as trailer mounted
unit. The monitor is generally used for protection of
flammable liquid storage tanks, loading racks, dykes
marine and many other industrial applications.
The Monitor possess several design features that
provides ease of operation, minimum maintenance and
resistance to normally destructive environments. The
monitor is used with aspirating, non-aspirating and
water nozzles with flow range upto 600 GPM (2270
LPM).
The monitor has welded carbon steel 2.5 inch
(65mm) waterway. All steel parts are hot dip
galvanized and epoxy painted for excellent corrosion
resistance. The vertical and horizontal rotation is
through corrosion resistant bronze swiveling joint
with double row of stainless steel ball bearing. Both
vertical and horizontal movements are controlled by
handle with twist lock.
OCTOBER, 2013 PAGE 1 OF 4 HD 134

INSTALLATION, TESTING AND Application of water or foam on an electric appliance
can cause serious injury.
MAINTENANCE
The water supply to monitor must be increased /
The monitor must be installed and operated carefully
decreased gradually to prevent possible water hammer
by a trained person, having good knowledge of
occurrence.
equipment. Before assembly of the monitor to the
supply piping, thoroughly flush the piping with water
to avoid sand, residue, welding slag or other debris
hindering the proper functioning of the monitor.
After few initial successful tests, an authorized
person must be trained to perform the inspection and
testing of the monitor.
The monitor should be ready for use. To achieve this
condition, scheduled inspection and maintenance
operation should be performed and it must be recorded
in the maintenance register book indicating the
requirement or recommendation. The recommended
maintenance, procedure must be followed as given in
the manual and also as per the local authority having
jurisdiction.
It is recommended to carry out weekly physical
inspection of the monitor. The inspection should verify
that no damage has taken place to any component and
the monitor is ready for use.
Carry out functional test every month for the flow,
regular rotation in horizontal and vertical plane for the
entire operating range to observe any leakage.
Periodic proper greasing through grease nipple
provided on bearing, worm wheel and worm shaft
must be ensured. Use water resistant low friction
synthetic grease. Lubrication is required for smooth
operation.
Each monitor must be operated with full flow in
accordance to the guidelines of the organisation
having local jurisdiction.
The owner is responsible for maintaining the equipment
in proper operating condition.
CAUTION
A trained personnel for fire fighting must use
the monitor. Appropriate guidance & training must be
given to reduce the risk or injury.
The nozzle must be fixed to the monitor carefully, The
flange bolts must be tightened uniformly.
The piping must be able to with-stand the horizontal
reaction force. Serious injury to personnel and
equipment can result from improper installation.
When installing monitor it is very essential that flange
bolts be tightened uniformly, to prevent cocking of
the monitor relative to the flange or valve.
Before flowing water from monitor, check that all
personnel are out of stream path and stream
direction will not cause avoidable property damage.

344 415
5
6
30˚
7
578
4
380
3
8
2
ELEVATION SIDE VIEW

PART LIST
SR.NO DESCRIPTION MATERIAL SPECIFICATION

1 BASE FLANGE ASTM A105
2 REDUCER ASTM A234 WPB SCH40
3 LOCK V & H BRASS
4 SWIVEL JOINT BRONZE IS:318/ ASTM B62
5 HANDLE STEEL
6 BARREL PIPE ASTM A106 SCH 40
7 ELBOW ASTM A234 WPB SCH40
8 DRAIN VALVE BRASS
Note :
1) Monitor inlet flange standard size is 80NB ( 3”)
to ANSI B16.5, 150#, other sizes 65 NB 2.5”)
or 100NB (4”) are optional.
2) All dimensions in mm and are approximate.

LIMITED WARRANTY
HD FIRE PROTECT PVT. LTD. hereby referred to as HD FIRE warrants to the original purchaser of the fire protection products manufactured by HD FIRE and to any other person
to whom such equipment is transferred, that such products will be free from defect in material and workmanship under normal use and care, for two (2) years from the date of
shipment by HD FIRE. Products or Components supplied or used by HD FIRE, but manufactured by others, are warranted only to the extent of the manufacturer’s warranty.
No warranty is given for product or components which have been subject to misuse, improper installation, corrosion, unauthorized repair, alteration or un-maintained.
HD FIRE shall not be responsible for system design errors or improper installation or inaccurate or incomplete information supplied by buyer or buyer’s representatives.
HD FIRE will repair or replace defective material free of charge, which is returned to our factory, transportation charge prepaid, provided after our inspection the material is
found to have been defective at the time of initial shipment from our works. HD FIRE shall not be liable for any incidental or consequential loss, damage or expense arising directly
or indirectly from the use of the product including damages for injury to person, damages to property and penalties resulting from any products and components manufactured
by HD FIRE. HD FIRE shall not be liable for any damages or labour charges or expense in making repair or adjustment to the product. HD FIRE shall not be liable for any
damages or charges sustained in the adaptation or use of its engineering data & services. In no event shall HD Fire’s product liability exceed an amount equal to the sale price.
The foregoing warranty is exclusive and in lieu of all other warranties and representation whether expressed, implied, oral or written, including but not limited
to, any implied warranties or merchantability or fitness for a particular purpose. All such other warranties and representations are hereby cancelled.
NOTICE :
The equipment presented in this bulletin is to be installed in accordance with the latest publication standards of NFPA or other similar organisations and also with
the provision of government codes or ordinances wherever applicable.
The information provided by us are to the best of our knowledge and belief, and are general guidelines only. Site handling and installation control is beyond our reach.
Hence we give no guarantee for result and take no liability for damages, loss or penalties whatsoever, resulting from our suggestion, information, recommendation or
damages due to our product.
Product development is a continuous programme of HD FIRE PROTECT PVT. LTD. and hence the right to modify any specification without prior notice is reserved with
the company.
C-3/6, THE NANDANVAN IND. ESTATE, L.B.S. MARG, THANE 400 604., INDIA.
HD FIRE PROTECT PVT. LTD. • PHONES : + (91) 22 2583 5434 • 2582 6958 • 2582 6793
Protecting What Matters Most to You • FAX : +(91) 22 2581 2524 • 6796 9049
• EMAIL : [email protected] WEBSITE : www.hdfire.com

Monitor - M 211: (Carbon Steel, Hot Dip Galvanized) Technical Data

Uploaded by

Copyright:

Available Formats

Monitor - M 211: (Carbon Steel, Hot Dip Galvanized) Technical Data

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Monitor - M 211: (Carbon Steel, Hot Dip Galvanized) Technical Data

Uploaded by

Copyright:

Available Formats

MONITOR - M 211

(CARBON STEEL, HOT DIP GALVANIZED)

OCTOBER, 2013 PAGE 1 OF 4 HD 134

OCTOBER, 2013 PAGE 2 OF 4 HD 134

ELEVATION SIDE VIEW

SR.NO DESCRIPTION MATERIAL SPECIFICATION

OCTOBER, 2013 PAGE 3 OF 4 HD 134

OCTOBER, 2013 PAGE 4 OF 4 HD 134

You might also like