Scribd Logo
Upload

Welcome to Scribd!

  • 613 views

    SEDECAL Calibration

    Uploaded by

    Petr
    SEDECAL Calibration

    Copyright:

    © All Rights Reserved
    Download as PDF or read online from Scribd

    SEDECAL Calibration

    Uploaded by

    Petr
    613 views153 pages
    SEDECAL Calibration

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    SEDECAL Calibration

    Copyright:

    © All Rights Reserved
    Download as PDF or read online from Scribd
    Download as pdf
    613 views153 pages

    SEDECAL Calibration

    Uploaded by

    Petr
    SEDECAL Calibration

    Copyright:

    © All Rights Reserved
    Download as PDF or read online from Scribd
    Download as pdf
    of 153
    Technical Publication CA-1004R4 Calibration HF Series Generators HF Series Generators Calibration REVISION HISTORY REVISION DATE REASON FOR CHANGE 0 ‘APR 1, 2001 First edition 1 JUL 4, 2001 Software update 2 FEB 1, 2003 New RF Adaptation Board 3 Nove, 2004 ‘AEC Calibration 4 APR 1, 2005 Text revision This Document is the english original version, edited and supplied by the manufacturer. ‘The Revision state of this Document is indicated in the code number shown at the bottom of this page. ADVISORY SYMBOLS. The following advisory symbols will be used throughout this manual. Their application and meaning are described below. DANGERS ADVISE OF CONDITIONS OR SITUATIONS THAT IF NOT HEEDED OR AVOIDED WILL CAUSE SERIOUS PERSONAL INJURY OR DEATH. ADVISE OF CONDITIONS OR SITUATIONS THAT IF NOT HEEDED OR AVOIDED COULD CAUSE SERIOUS PERSONAL INJURY, OR CATASTROPHIC DAMAGE OF EQUIPMENT OR DATA. Advise of conditions or situations that if not heeded or (CAUTION avoided could cause personal injury or damage to equipment or data. Note 7 Alert readers to pertinent facts and conditions. Notes represent information that is important to know but which do not necessarily relate to possible injury or damage to equipment. (cA-1004R4 IMPORTANT NOTE FOR X-RAY TUBE SEASONING The seasoning procedure should be carried out to assure a correct operation of the X-ray Tube when it is putting into operation for the first time (new X-ray Tubes). This action establishes a favorable distribution of the electrical charges and electrostatic stresses in the insulation system of the tube and the associated equipment. Included in each X-ray Tube, the manutacturer gives the instructions to pertorm the Tube seasoning. {tis mandatory to follow these instructions, calibrating previously the combinations of kV / mA stations required for carrying out the seasoning procedure. (Refer to Calibration document for calibration of kV/mA combinations). A correct seasoning will assure the most accurate calibration of the Generator (Filament Current Numbers) and a subsequent trouble-free operation.

    You might also like