320E LRR

Hydraulic Excavator

Engine Drive
Engine Model Cat ® C6.6 ACERT™ Maximum Travel Speed 5.6 km/h
Engine Rated Power – ISO 14396 112 kW (152 hp) Maximum Drawbar Pull 205 kN
Weight
Minimum Weight 23 600 kg
Maximum Weight 24 000 kg
Introduction

Since its introduction in the 1990s, the 300 Series

family of excavators has become the industry
standard in general, quarry, and heavy construction
applications. The all-new E Series and the 320E LRR
will continue that trend-setting standard.

The 320E LRR meets today’s European Union

Stage IIIB emission standards. It is also built with
several new fuel-saving and comfort-enabling
features and benefits that will delight owners
and operators.

If you are looking for more productivity and

comfort less fuel consumption and emissions,
and easier and more sensible serviceability,
you will find it in the all-new 320E LRR and
the E Series family of excavators.

The 320E LRR is technically identical to the

320E L and 320E LN.

Contents
Engine ...................................................................3

Operator Station..................................................4

Reduced Radius ..................................................5

Hydraulics ............................................................6

Structures & Undercarriage .............................8

Front Linkage .......................................................9

Work Tools..........................................................10

Integrated Technologies ..................................12

Serviceability .....................................................13

Safety ..................................................................14

Complete Customer Care.................................15

Sustainability .....................................................16

Specifications ....................................................17

Standard Equipment .........................................25

Optional Equipment...........................................26

Notes...................................................................27

2
Engine
Reduced emissions, economical and reliable performance

Cat® C6.6 ACERT™ Engine

The Cat C6.6 ACERT engine delivers more horsepower using
significantly less fuel than the previous series engine.

Emissions Solution
Equipped to meet Stage IIIB emission standards,
the 320E LRR’s C6.6 ACERT engine features wall and
thru flow filters that perform through the machine work
cycle without operator intervention.
All nonroad European Union Stage IIIB diesel engines
are required to use only Ultra Low Sulfur Diesel (ULSD)
fuels containing 15 mg/kg sulfur or less. Cat® DEO-ULS™
or oils that meet the Cat ECF-3, API CJ-4, and ACEA E9
specification are also required. For further fluid specifications
and guidelines, visit: http://www.cat.com/cda/files/214956/7/
SEBU6251-13-secured.pdf

Biodiesel-Ready Fuel System

The C6.6 ACERT engine is equipped with an electronic-
controlled high-pressure fuel system that includes an electric
priming pump (lifting pump) and three-layer fuel hoses to
allow the use of biodiesels up to B20 (biodiesel fuel 20%
mixture meeting ASTM 6751 or EN 14214).

Cooling System
The cooling system features an air-to-air aftercooler
and A/C condenser positioned for easy servicing; the fan
automatically adjusts to ambient temperatures to help
reduce fuel consumption and noise.

Speed and Power Control

The 320E LRR features speed control to maintain a constant
speed – regardless of load – to improve fuel economy.
Two different power modes are offered: high power and
economy. The operator can easily change between modes
through the monitor or console switch to meet the needs
for the job at hand – all to help manage and conserve fuel.

3
Operator Station
Comfort and convenience to keep people productive

Seats
The seat range includes air suspension, heated, and air cooled
options. All seats include a reclining back, upper and lower
seat slide adjustments, and height and tilt angle adjustments
to meet operator needs for comfort and productivity.

Controls
The right and left joystick consoles can be adjusted to meet
individual preferences, improving operator comfort and
productivity during the course of a day. With the touch of a
button, one-touch idle reduces engine speed to help save fuel;
touch it again or move the joystick and the machine returns
to normal operating level.

Monitor
The 320E LRR is equipped with a 7" LCD (Liquid Crystal
Display) monitor that’s 40% bigger than the previous model’s
with higher resolution for better visibility. In addition to an
improved keypad and added functionality, it’s programmable
to provide information in a choice of 42 languages to
support today’s diverse workforce.
An “Engine Shutdown Setting” accessible through the monitor
allows owners and operators to specify how long the machine
should idle before shutting down the engine, which can save
significant amounts of fuel.
The image of the rearview camera is displayed directly on the
monitor. Up to two different camera images can be displayed
on the screen.

Power Supply
Two 12-volt power supply sockets are located near key
storage areas for charging electronic devices.

Storage
Storage spaces are located in the front, rear, and side consoles.
A specific space near the auxiliary power supply holds MP3
players and cell phones. The drink holder accommodates
large mugs with handles, and a shelf behind the seat stores
large lunch or toolboxes.

Automatic Climate Control

The climate control system features five air outlets with
positive filtered ventilation, which makes working in the heat
and cold much more pleasant.

4
Reduced Radius
Designed for high maneuverability in confined spaces

Reduced Radius
The 320E LRR’s tail swing radius is 2080 mm compared to 2830 mm on the 320E. When aligned with the
tracks, working over the front, it does not extend beyond the track length allowing the 320E LRR to work
well in road construction applications and other space-restricted areas.

Stability
The 320E LRR offers a stable platform for all applications. When compared to the 320E L, the 320E LRR
delivers up to 16% additional lift over the side with the heavier counterweight. One of the main contributors
is the use of an additional counterweight, which allows the balance of the machine to be comparable to
a standard machine with a longer tail swing.

Comfort
While the length of the upper structure is reduced to accommodate the work at hand, the cab of the
320E LRR is the same size with all the amenities and attachments found inside the 320E L.

5
Hydraulics
Power to move more dirt, rock, and debris with speed and precision

Hydraulic Horsepower
Hydraulic horsepower is the actual machine power available
to do work through implements and work tools. It’s much
more than just the engine power under the hood – it’s a core
strength that differentiates Cat machines from other brands.

Hydraulic Pumps
The 320E LRR uses a two-pump, high-pressure hydraulic
system to tackle the toughest work in short order. A highly
efficient and simple back-to-back main control valve improves
fuel consumption and allows for greater tool versatility.

Heavy Lift
The 320E LRR features a heavy lift function to give more lift
capacity over the front. With a touch of a button, pressure
increases and engine speed reduces to give better control in
lifting those extra-tough-to-move materials like concrete pipe
and road construction barriers.

Swing Priority Circuit

The swing priority circuit on the 320E LRR uses an electric
valve that’s operated by the machine’s Electronic Control
Module (ECM). Compared to using a hydraulic valve, an
electric valve allows for more finely tuned control, which
is critical during material loading.

Electric Boom Regeneration Valve

This valve minimizes pump flow when the boom lowers
down, which helps improve fuel efficiency. It is optimized
for any dial speed setting being used by the operator,
which results in enhanced boom lowering speed for greater
controllability.

6
7
Structures & Undercarriage

Built to work in rugged environments

Frame
The 320E LRR features a solid foundation that’s built
to absorb the stresses of every day work. The main frame
utilizes high-tensile-strength steel and a one-piece swing table
to improve strength and reliability. The X-shaped carbody
is designed to resist bending and twisting forces. The upper
frame includes reinforced mountings to support the Roll-
Over Protective Structure (ROPS) cab; the lower frame
is reinforced to increase component durability.

Undercarriage
The undercarriage is built to support various work
applications. Precision-forged carrier rollers, press-fit pin
master joints, and enhanced track shoe bolts improve
durability and reduce the risk of machine downtime and
the need and cost to replace components. Heavy-duty
rollers and idlers are sealed and lubricated to extend service
lift. Track links are assembled and sealed with grease to
decrease internal wear and increase life compared to dry seal
undercarriage. Also, a segmented two-piece guiding guard is
now offered to help maintain track alignment and improve
performance in multiple applications.

Counterweights
A 6.2 mt counterweight is standard. Integrated links enable
easy removal of the counterweight for maintenance or shipping.

8
Front Linkage
Made for high stress and long service life

Booms and Sticks

The 320E LRR is offered with a 5.7 m reach boom and the R2.9B1 stick.
Both boom and stick are made of high-tensile-strength steel using a large box section design with interior
baffle plates and an additional bottom guard; both undergo ultrasound inspection to ensure weld quality
and reliability.
Other reinforced areas on the 320E LRR include thick multi-plate fabrications, castings, and forgings used
in high-stress areas such as the boom nose, boom foot, boom cylinder, and stick foot. The boom nose pin
retention method is a captured flag design for added durability. The front linkage pins’ inner bearing surfaces
are welded with a self-lubricated bearing, which helps extend service intervals and increase uptime.

9
Work Tools
Dig, hammer, rip, and cut with confidence

An extensive range of Cat Work Tools for the 320E LRR

includes buckets, compactors, grapples, scrap and demolition
shears, multi-processors, pulverizers, and hammers. Each is
designed to optimize the versatility and performance of
your machine.

Buckets
Cat buckets are designed as an integral part of the
320E LRR system and feature new geometry for better
performance. The leading edge has been pushed forward,
resulting in more efficient filling and better operator control
for greatly improved productivity. Wear coverage in the
corners and side cutter and sidebar protector coverage are
improved. All benefits are captured in a new bucket line
with a new bucket naming convention.
Caterpillar offers standard bucket categories for excavators.
Each category is based on intended bucket durability when
used in recommended application and material.

10
General Duty (GD)
GD buckets are for digging in low-impact, low-abrasion
material such as dirt, loam, and mixed compositions of dirt
and fine gravel.

Heavy Duty (HD)

The most popular bucket style, HD buckets are a good
starting point when digging conditions are not well known
like a wide range of impact and abrasion conditions
including mixed dirt, clay, and rock.

Severe Duty (SD) 1 2

SD buckets are for higher abrasion conditions such as
well shot granite and caliche. Red area on bucket image
illustrates additional protection against wear as compared
to a GD bucket.

Specialty Buckets
In addition to the standard four bucket categories, specialty
bucket styles are available for the 320E LRR, each with a
different purpose:
• Ditch Cleaning buckets for cleaning ditches, slope
grading, and other finish work.
• Center-Lock Pin Grabber Performance buckets for
maximum digging performance while keeping the
versatility and convenience of a coupler. 3
• Wide Tip buckets for low impact material where leaving
a smoother floor and minimal spillage are necessary.
1) General Duty 2) Heavy Duty 3) Severe Duty
Hydraulic Kits
Caterpillar offers field-installed hydraulic kits that are uniquely
designed to integrate Cat Work Tool attachments with Cat
excavators. Hoses and tubes are pre-made, pre-shaped, and
pre-painted to make installation quick and easy.

Comprehensive Product Support

All Cat Work Tools are backed up by a world-wide network
of well-stocked parts depots and highly experienced service
and support personnel.

11
 1

Integrated Technologies

Solutions that make work easier and more efficient

Cat® Grade Control Depth and Slope

This optional system combines traditional machine control and guidance
with standard factory-installed and calibrated components, making the
system ready to go to work the moment it leaves the factory. The system
utilizes internal front linkage sensors – well protected from the harsh
working environment – to give operators real-time bucket tip position
information through the cab monitor (1), which minimizes the need and cost
for traditional grade checking and improves job site safety. It also helps the
operator complete jobs in fewer cycles, which means less fuel use.

Cat Product Link 2

This deeply integrated into the machine monitoring system is designed to help
customers improve their overall fleet management effectiveness. Events and
diagnostic codes as well as hours, fuel consumption, idle time, machine location,
and other detailed information are transmitted to a secure web based
application (2 and 3) called VisionLink™, which uses powerful tools
to communicate to users and dealers.

12
Serviceability
Fast, easy and safe access built in

Service Doors
Wide service doors and a one-piece hood provide easy access
to the cooling and engine compartments. Both doors and hood
feature enhanced hardware and a new screen design to help
minimize debris entry.

Compartments
The compartments are designed to provide technicians with
quick access to major components and regular service items
like filters. The fresh air filter, for example, is located on the
side of the cab to make it easy to reach and replace as needed.

Other Service Enhancements

The water separator with water level sensor has a primary
fuel filter element located in the pump compartment near
ground level.
The fuel tank features a remote drain cock located in the
pump compartment to make it easy to remove water and
sediment during maintenance.
The engine oil check gauge is situated in front of the engine
compartment for easy access, and a uniquely designed drain
cock helps prevent spills.
Hydraulic lash adjusters automatically adjust valve opening
and closing events to help reduce fuel consumption and
engine noise. They also eliminate the need for a valve lash,
which reduces maintenance for the customer.

13
Safety
Features to help protect people

ROPS Cab
The ROPS-certified cab allows a Falling Object Guard
Structure (FOGS) to be bolted directly to it.

Sound Proofing
Improved sealing and cab roof lining lower noise levels by
5 dB inside the cab – a significant benefit to operators.

Anti-Skid Plates
The surface of the upper structure and the top of the
storage box area are covered with anti-skid plates to help
prevent service personnel and operators from slipping
during maintenance.

Steps, Hand and Guard Rails

Steps on the track frame and storage box along with extended
hand and guard rails to the upper deck enable operators to
securely work on the machine.

Time Delay Cab and Boom Lights

After the engine start key has been turned to the “OFF”
position, lights will be illuminated to enhance visibility.
The time delay can vary from 0 to 90 seconds, which can
be set through the monitor.

High Intensity Discharge (HID) Lights

Cab lights can be upgraded to HID for greater visibility.

Windows
Two windshield options are available: The 70/30 split
configuration features an upper window equipped with handles
on the top and both sides so the operator can slide it to store
in the ceiling. The lower window is removable and can be
stored on the left wall of the cab shell.
The large skylight provides great overhead visibility, excellent
natural lighting, and good ventilation. The skylight can be
opened completely to become an emergency exit.

Monitor Warning System

The machine’s advanced diagnostic system features a buzzer
in the monitor to communicate to operators critical events
like full filters or low hydraulic fluid levels so they can take
immediate action.

Rearview Camera and Mirrors (ISO 5006)

The standard rearview camera is housed in the counterweight.
The image projects through the cab monitor to give the
operator a clear view of what is behind the machine.

14
Complete Customer Care
Service you can count on

Product Support
Cat dealers utilize a worldwide parts network to maximize your machines’ uptime. Plus they can help
you save money with Cat remanufactured components.

Machine Selection
What are the job requirements and machine attachments? What production is needed? Your Cat dealer
can provide recommendations to help you make the right machine choices.

Purchase
Consider financing options and day-to-day operating costs. Look at dealer services that can be included
in the machine’s cost to yield lower owning and operating costs over time.

Customer Support Agreements

Cat dealers offer a variety of customer support agreements and work with you to develop a plan to meet
your specific needs. These plans can cover the entire machine, including attachments, to help protect
your investment.

Operation
Improving operating techniques can boost your profits. Your Cat dealer has videos, literature, and other
ideas to help you increase productivity. Caterpillar also offers simulators and certified operator training
to help maximize the return on your investment.

Replacement
Repair, rebuild, or replace? Your Cat dealer can help you evaluate the cost involved so you can make the
best choice for your business.

15
Sustainability
Generations ahead in every way

• The C6.6 ACERT engine, along with the Cat Clean Emissions Module (CEM), meets EU Stage IIIB
emission standards.
• The 320E LRR has the flexibility of running on either ultra-low-sulfur diesel (ULSD) fuel with
15 ppm of sulfur or less or biodiesel (B20) fuel blended with ULSD that meets ASTM 6751
or EN 14214 standards.
• Even when operating in high horsepower and high production applications, the 320E LRR
performs a similar amount of work as the previous D Series model with significantly reduced
fuel consumption.
• The 320E LRR is quieter inside and out, which benefits operators and the surrounding environment.
• A ground-level overfill indicator rises when the hydraulic oil tank is full to help the operator
avoid spilling.
• The QuickEvac™ option ensures fast, easy, and secure changing of engine and hydraulic oil.
• The 320E LRR is built to be rebuilt with major structures and components capable of being
remanufactured to reduce waste and replacement costs.
• An eco-friendly engine oil filter eliminates the need for painted metal cans and aluminum top
plates. The cartridge-style spin-on housing enables the internal filter to be separated and replaced;
the used internal element can be incinerated to help reduce waste.
• The 320E LRR is an efficient, productive machine that’s designed to conserve our natural resources
for generations ahead.

16
 320E LRR Hydraulic Excavator Specifications

Engine Drive Track

Engine Model Cat ® C6.6 Maximum Travel Speed 5.6 km/h Number of Shoes (each side)
ACERT™ Maximum Drawbar Pull 205 kN Long Undercarriage 49 pieces
Engine Rated Power – 112 kW Number of Track Rollers (each side)
ISO 14396 Swing Mechanism
Long Undercarriage 8 pieces
Engine Rated Power – 150 hp
Swing Speed 11.2 rpm
Number of Carrier Rollers (each side)
ISO 14396 (imperial)
Swing Torque 61.8 kN·m
Long Undercarriage 2 pieces
Engine Rated Power – 152 hp
ISO 14396 (metric)
Service Refill Capacities Sound Performance
Bore 105 mm
Stroke 127 mm Fuel Tank Capacity 290 L Operator – ISO 6396 71 dB
Displacement 6.6 L Cooling System 30 L Spectator – ISO 6395 103 dB
Engine Oil (with filter) 23 L • When properly installed and maintained,
Hydraulic System Swing Drive 8L the cab offered by Caterpillar, when tested
with doors and windows closed according
Main System – 428 L/min Final Drive (each) 8L
to ANSI/SAE J1166 OCT98, meets OSHA
Maximum Flow (Total) Hydraulic System 205 L and MSHA requirements for operator
Swing System – 214 L/min (including tank) sound exposure limits in effect at time of
Maximum Flow Hydraulic Tank 115 L manufacture.
Maximum Pressure – 35 000 kPa/ • Hearing protection may be needed when
Equipment 38 000 kPa operating with an open operator station
Maximum Pressure – Travel 35 000 kPa and cab (when not properly maintained or
doors/windows open) for extended periods
Maximum Pressure – Swing 25 000 kPa or in noisy environment.
Pilot System – 24.3 L/min
Maximum Flow Standards

Pilot System – 3920 kPa

Maximum Pressure Brakes ISO 10265 2008
Boom Cylinder – Bore 120 mm Cab/FOGS ISO 10262 1998
Boom Cylinder – Stroke 1260 mm Cab ROPS ISO 12117-2 2008
Stick Cylinder – Bore 140 mm
Stick Cylinder – Stroke 1504 mm
B1 Bucket Cylinder – Bore 120 mm
B1 Bucket Cylinder – Stroke 1104 mm

17
320E LRR Hydraulic Excavator Specifications

Dimensions
All dimensions are approximate.

10
6
7 4
5
8
2

Reach Boom
5.7 m
Stick R2.9B1
mm
1 Shipping Height without Guard Rail* 3130
Shipping Height with Guard Rail 3150
Shipping Height with Top Guard without Guard Rail 3150
2 Shipping Length 8970
3 Tail Swing Radius 2080
4 Length to Center of Rollers 3650
5 Track Length 4460
6 Ground Clearance 450
7 Track Gauge 2380
8 Transport Width
600 mm Shoes 2980
700 mm Shoes 3080
9 Cab Height 2960
Cab Height with Top Guard 3150
10 Counterweight Clearance** 1000

*Including shoe lug height without guard rail.

**Without shoe lug height.

18
Working Ranges
All dimensions are approximate.

Meters
10

5 3
4
4

1 5

0
2
1

2
7 R2.9B1
3
1 6
4

7
11 10 9 8 7 6 5 4 3 2 1 0 1 Meters

Reach Boom
5.7 m
Stick R2.9B1
mm
1 Maximum Digging Depth 6720
2 Maximum Reach at Ground Level 9860
3 Maximum Cutting Height 9370
4 Maximum Loading Height 6490
5 Minimum Loading Height 2170
6 Maximum Depth Cut for 2440 mm Level Bottom 6550
7 Maximum Vertical Wall Digging Depth 5060

19
320E LRR Hydraulic Excavator Specifications

Operating Weight and Ground Pressure

700 mm 600 mm
Triple Grouser Shoes Triple Grouser Shoes
kg kPa kg kPa
Reach Boom (5.7 m)
R2.9B1 HD 24 000 43.0 23 600 49.5

Major Component Weights

kg
Base Machine (with boom cylinder, without counterweight, front linkage and track) 6500
Long Undercarriage 7850
Counterweight
6.2 mt 6200
Boom (includes lines, pins and stick cylinder)
Reach Boom (5.7 m HD) 1720
Stick (includes lines, pins and bucket cylinder)
R2.9B1 HD 680
Track Shoe (Long/per two tracks)
600 mm Triple Grouser 2700
700 mm Triple Grouser 3070
Buckets
B1 1200 mm GD 347-6731 SAE 1.19 m3 930
All weights are rounded up to nearest 10 kg except for buckets.

Base machine includes 75 kg operator weight, 90% fuel weight, and undercarriage with center guard.

20
Bucket and Stick Forces

Reach Boom
5.7 m
Stick R2.9B1
B1 – Family Bucket
kN
General Duty
Bucket Digging Force (ISO) 140.5
Stick Digging Force (ISO) 106.7
Heavy Duty
Bucket Digging Force (ISO) 150.4
Stick Digging Force (ISO) 106.4
Severe Duty
Bucket Digging Force (ISO) 150.4
Stick Digging Force (ISO) 106.4

21
320E LRR Hydraulic Excavator Specifications

Reach Boom Lift Capacities

Load Point Height Load at Maximum Reach Load Radius Over Front Load Radius Over Side

Boom – 5.7 m HD Counterweight – 6.2 mt Bucket – None

Stick – R2.9B1 HD Shoes – 600 mm triple grouser

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m

7.5 m kg *4950 *4950 *4300 *4300 6.15

6.0 m kg *5450 *5450 *3950 *3950 7.28
4.5 m kg *6000 5500 *5650 3900 *3900 3550 7.98
3.0 m kg *8800 8050 *6900 5300 5950 3850 *4000 3250 8.35
1.5 m kg *10 650 7550 *7850 5050 5850 3700 *4200 3150 8.44
Ground Line kg *6600 *6600 *11 650 7300 7950 4900 5750 3650 *4650 3200 8.26
–1.5 m kg *7050 *7050 *11 400 *11 400 *11 800 7200 7900 4850 5750 3600 5450 3450 7.78
–3.0 m kg *12 100 *12 100 *15 600 13 950 *11 050 7250 7900 4850 6450 4050 6.94
–4.5 m kg *12 500 *12 500 *9000 7450 *6800 5500 5.60

Boom – 5.7 m HD Counterweight – 6.2 mt Bucket – None

Stick – R2.9B1 HD Shoes – 700 mm triple grouser

1.5 m 3.0 m 4.5 m 6.0 m 7.5 m

7.5 m kg *4950 *4950 *4300 *4300 6.15

6.0 m kg *5450 *5450 *3950 *3950 7.28
4.5 m kg *6000 5600 *5650 4000 *3900 3600 7.98
3.0 m kg *8800 8150 *6900 5350 *6050 3900 *4000 3300 8.35
1.5 m kg *10 650 7650 *7850 5150 5950 3800 *4200 3200 8.44
Ground Line kg *6600 *6600 *11 650 7400 8100 5000 5850 3700 *4650 3250 8.26
–1.5 m kg *7050 *7050 *11 400 *11 400 *11 800 7300 8000 4900 5800 3650 *5500 3500 7.78
–3.0 m kg *12 100 *12 100 *15 600 14 150 *11 050 7350 8050 4950 6550 4100 6.94
–4.5 m kg *12 500 *12 500 *9000 7550 *6800 5600 5.60
*Indicates that the load is limited by hydraulic lifting capacity rather than tipping load. The above loads are in compliance with hydraulic excavator lift capacity
standard ISO 10567:2007. They do not exceed 87% of hydraulic lifting capacity or 75% of tipping load. Weight of all lifting accessories must be deducted from the
above lifting capacities. Lifting capacities are based on the machine standing on a firm, uniform supporting surface. The use of a work tool attachment point to
handle/lift objects, could affect the machine lift performance.
Always refer to the appropriate Operation and Maintenance Manual for specific product information.

22
Work Tool Offering Guide*

Boom Type Reach HD R5.7

Stick Size HD R2.9
Hydraulic Hammer H115Es
H120Es
H130Es
Multi-Processor MP15**
Pulverizer P215
Mobile Scrap and Demolition Shear S320B**
S325B***
S340B***
Compactor (Vibratory Plate) CVP110
Contractors’ Grapple G120B – G130B
Trash Grapple These work tools are available for the 320E LRR.
Rakes Consult your Cat dealer for proper match.
*Matches are dependent on excavator configurations. Consult your Cat dealer for proper work tool match.
**Pin-on only.
***Boom-mount.

23
320E LRR Hydraulic Excavator Specifications

Bucket Specifications and Compatibility

Without Quick Coupler

Width Capacity Weight Fill Reach (HD)
Linkage mm m3 kg % R2.9 HD
General Duty (GD) B 600 0.46 549 100%
B 750 0.64 620 100%
B 900 0.81 666 100%
B 1200 1.19 800 100%
B 1300 1.30 832 100%

B 1400 1.43 867 100%

Heavy Duty (HD) B 1050 1.00 879 100%

B 1200 1.19 906 100%
B 1200 1.19 917 100%
B 1300 1.30 960 100%

Severe Duty (SD) B 1200 1.19 1000 90%

Maximum load pin-on (payload + bucket) kg 3300

The above loads are in compliance with hydraulic excavator standard EN474, they do not exceed 87% of hydraulic lifting capacity Maximum Material Density:
or 75% of tipping capacity with front linkage fully extended at ground line with bucket curled.
2100 kg/m3
Capacity based on ISO 7451. 1800 kg/m3

Bucket weight with General Duty tips. 1500 kg/m³

Caterpillar recommends using appropriate work tools to maximize the value customers receive from our products. Use of work tools, including buckets, which are
outside of Caterpillar’s recommendations or specifications for weight, dimensions, flows, pressures, etc. may result in less-than-optimal performance, including
but not limited to reductions in production, stability, reliability, and component durability. Improper use of a work tool resulting in sweeping, prying, twisting and/or
catching of heavy loads will reduce the life of the boom and stick.

24
 320E LRR Standard Equipment

Standard equipment may vary. Consult your Cat dealer for details.

ENGINE CAB UNDERCARRIAGE

C6.6 diesel engine Pressurized operator station Grease Lubricated Track GLT2, resin seal
Biodiesel capable with positive filtration Towing eye on base frame
European Union Stage IIIB compliant Mirror package Segmented (2 piece) track guiding guard
2300 m altitude capability Sliding upper door window
Electric priming pump (lifting pump) (left-hand cab door) ELECTRICAL
Automatic engine speed control Glass-breaking safety hammer 80 amp alternator
Economy and high power modes Removable lower windshield Circuit breaker
Two-speed travel with in cab storage bracket Capability to electrically connect a beacon
Side-by-side cooling system Coat hook
Radial seal air filter Beverage holder LIGHTS
Primary filter with water separator Literature holder Boom light with time delay
and water separator indicator switch Two stereo speakers Exterior lights integrated into storage box
Starting kit, cold weather, –18° C Storage shelf suitable for lunch or toolbox
Screen filter in fuel line Color LCD display with warning, filter/fluid SECURITY
Primary fuel filter change, and working hour information Cat one key security system
Secondary fuel filter Adjustable armrest Door locks
Height adjustable joystick consoles Cap locks on fuel and hydraulic tanks
HYDRAULIC SYSTEM Neutral lever (lock out) for all controls Lockable external tool/storage box
Regeneration circuit for boom and stick Travel control pedals Signaling/warning horn
Reverse swing dampening valve with removable hand levers Secondary engine shutoff switch
Automatic swing parking brake Capability of installing two additional pedals Openable skylight for emergency exit
High-performance hydraulic return filter Two power outlets, 10 amp (total) Rearview camera
High-pressure line Laminated glass front upper window
and tempered other windows TECHNOLOGY
Medium-pressure line
Cab hatch Product Link
Common (Electronic Control device,
1/2P, one-way circuit) Seat, high-back air suspension with heater
Capability of installing Cat Bio hydraulic oil Sunscreen GUARD
Quick drains, engine and hydraulic oil Windshield wiper with washer Side rubber bumper
(QuickEvac™) HD Bottom guard
Swivel guard
HD Travel motor guard

25
320E LRR Optional Equipment

Optional equipment may vary. Consult your Cat dealer for details.

UNDERCARRIAGE
600 mm triple grouser shoes
700 mm triple grouser shoes

26
Notes

27

320E LRR Hydraulic Excavator

For more complete information on Cat products, dealer services, and industry solutions,
visit us on the web at www.cat.com
AEHQ6582-01 (03-2012)
© 2012 Caterpillar Inc.
Replaces AEHQ6582
All rights reserved (EU)
Materials and specifications are subject to change without notice. Featured machines
in photos may include additional equipment. See your Cat dealer for available options.

CAT, CATERPILLAR, SAFETY.CAT.COM, their respective logos, “Caterpillar Yellow”

and the “Power Edge” trade dress, as well as corporate and product identity used herein,
are trademarks of Caterpillar and may not be used without permission.
20