Am DDM Ups Rs Aa 0418
Am DDM Ups Rs Aa 0418
Am DDM Ups Rs Aa 0418
Range Summary
The PowerSafe® DDm battery range offers an
ideal solution for large capacity Valve Regulated
Lead Acid (VRLA) battery requirements. The
PowerSafe DDm battery’s steel can (module)
design, with its integral racking system, provides
a cost effective battery system. This creates a
Features and Benefits compact, quick and simple installation process.
• Capacity: 292-4094 Watts per Cell (WPC) – The PowerSafe DDm battery system’s cutting-edge technology
15 min. rate to 1.67 VPC @ 77°F (25°C) incorporates an enhanced cell design with a superior racking
system. The enhanced cell incorporates thicker positive
• Steel module design, cells factory installed in plates for longer life. The welded/epoxy, dual post seal design
permanent steel modules with one or two cells provides the highest integrity seal in the industry. The large
per can copper post design also enhances the high rate performance.
• Standard top termination – optional side
termination Cells are encased in dedicated protective steel cans (modules)
that maintain constant, uniform compression for the life of
• Clear flame retardant safety shields allow for the cell. The easy to assemble racking system provides total
easy visual inspection without removal flexibility for system configuration and its built-in thermal
• Inter-unit connectors and terminal plates: management allows air flow between the cells, resulting in
tin-plated copper; optional lead-plated copper fast, effortless installation even in the most difficult locations.
available
The PowerSafe DDm battery, with its optimized recombination
• Flexible module configuration – 2, 3, 4 or 6 cells technology and extra thick plates, provides excellent
wide in single cell modules; 2, 4 or 6 cells wide performance and service life for mission critical systems.
in 2-cell modules
Visit us at www.enersys.com
Construction Installation and Operation Standards
• Positive plate - thick 0.252” lead-calcium-tin grids • Compact, quick and simple installation process • Non-spillable classification (UN2800)
minimize corrosion and prolong life • Low maintenance – no watering required • Approved for air transportation (IATA A67)
• Negative plate - balanced lead-calcium plates • Thick plates, single piece container construction, • Recognized by UL (UL standard 1989)
optimize recombination efficiency robust construction for long life • The management systems governing the
• Absorbed Glass Mat (AGM) separator - mechanically • Welded/epoxy dual post seal design means zero manufacture of this product are ISO 9001:2008 and
strong, low electrical resistance, absorbed glass mat leaks ISO 14001:2004 certified
which completely absorbs the electrolyte into its
• 100% “out of the box” initial capacity • Certified to 1997 UBC Zone 4 to eight high on
structure
• Operating temperature: -4°F (-20°C) to 122°F (50°C) DDm125 and ten high on DDm35, DDm50, DDm85
• Container/cover - standard UL94 V-0 flame retardant and DDm100 sizes for certain configurations
Recommended temperature: 68°F (20°C) to 86°F
polypropylene (LOI 28%)
(30°C)
• Terminal post - square lead-tin coated copper insert
• Optional disconnect switches, wall or relay rack
cross-drilled (0.25” holes) with large surface area, to
mounted
provide maximum conductivity2
• Initial post torque 85 in - lb (7.1 ft - lb), 9.6 Newton
• Terminal seal - ring burn with secondary epoxy resin
meters (N-m) Re-torque to 80%; 2DDm35-07 post
seal is 100% water bath tested in the factory and
torque 60 in - lb (5 ft - lb), 6.8 N-m
proven in service
• DDm System now featuring square post
• Relief valve - operates at 2-3 psi and is complete with
integral flame arrestor
General Specifications
Nominal Row Nominal Stack Nominal Stack Length** Typical System Weight per Cell1
Ah Cells per Nominal Height Depth
Battery Type Cell Type Voltage 2 Wide 3 Wide 4 Wide 6 Wide Unpacked Packed
Capacity module (V) in mm in mm in mm in mm in mm in mm lbs kg lbs kg
DDm35-072 2DDm35-072 105 2 4 8.63 219.2 16.25 412.8 12.78* 324.6* N/A N/A 17.26* 483.4* 16.90 429.3 26.0 12.0 29.3 13.3
DDm50-09 2DDmP50-09 200 2 4 8.63 219.2 16.25 412.8 15.78* 400.8* N/A N/A 18.41 476.6 25.90 657.9 47.0 21.3 50.3 22.8
DDm50-13 2DDmP50-13 300 2 4 8.63 219.2 16.25 412.8 18.78* 477.0* N/A N/A 24.41 620.0 34.90 886.5 65.0 29.5 68.3 31.0
DDm50-17 DDmP50-17 400 1 2 8.63 219.2 16.25 412.8 17.38 441.5 24.37 619.0 31.15 791.2 45.06 1144.5 88.0 39.9 91.3 41.4
DDm85-13 2DDmP85-13 510 2 4 8.63 219.2 23.50 569.6 18.78* 477.0* N/A N/A 24.41 620.0 34.90 886.5 96.0 43.6 99.3 45.1
DDm85-15 2DDmP85-15 595 2 4 8.63 219.2 23.50 569.6 20.28* 515.1* N/A N/A 27.41 696.2 39.40 1000.8 111.0 50.4 114.3 51.9
DDm85-21 DDmP85-21 850 1 2 8.63 219.2 23.50 569.6 20.37 517.4 28.82 732.0 37.15 943.6 55.60 1412.2 159.0 72.1 162.3 73.6
DDm85-25 DDmP85-25 1020 1 2 8.63 219.2 23.50 569.6 23.37 593.6 33.32 846.3 43.15 1096.0 64.57 1640.1 183.0 83.0 186.3 84.5
DDm85-27 DDmP85-27 1105 1 2 8.63 219.2 23.50 569.6 24.87 631.7 35.58 903.7 46.16 1172.5 69.11 1755.4 199.0 90.3 202.3 91.8
DDm85-33 DDmP85-33 1360 1 2 8.63 219.2 23.50 569.6 29.37 746.0 42.32 1074.9 55.15 1400.8 82.60 2098.0 245.0 111.1 248.3 112.6
DDm100-21 DDmP100-21 1000 1 2 8.63 219.2 26.25 666.8 20.37 517.4 28.82 732.0 37.15 943.6 55.60 1412.2 185.0 83.9 188.3 85.4
DDm100-25 DDmP100-25 1200 1 2 8.63 219.2 26.25 666.8 23.37 593.6 33.32 846.3 43.15 1096.0 64.57 1640.1 219.0 99.3 222.3 100.9
DDm100-27 DDmP100-27 1300 1 2 8.63 219.2 26.25 666.8 24.87 631.7 35.58 903.7 46.16 1172.5 69.11 1172.5 236.0 107.1 239.3 108.6
DDm100-33 DDmP100-33 1600 1 2 8.63 219.2 26.25 666.8 29.37 746 42.32 1074.9 55.15 1400.8 82.60 2098.0 287.0 130.2 290.3 131.7
DDm125-25 DDmP125-25 1500 1 2 11.00 279.4 27.50 698.5 24.48 621.8 34.27 870.5 44.37 1127.0 65.68 1668.3 269.0 122.0 272.3 123.5
DDm125-27 DDmP125-27 1625 1 2 11.00 279.4 27.50 698.5 25.98 659.9 36.53 927.9 47.37 1203.2 70.22 1783.6 290.0 131.5 293.3 133.3
DDm125-33 DDmP125-33 2000 1 2 11.00 279.4 27.50 698.5 30.48 774.2 43.27 199.0 56.37 1431.8 83.71 2126.2 355.0 161.0 358.3 162.5
* Standard top termination now available, stack length is with same side termination.
**Stack dimension representative of single stack configurations. Contact EnerSys® for sesimic qualifications of systems.
1
Includes hardware for calculating system weight.
2
2DDm35-07 only available with round post.
Discharge Rates (KW per Cell) to 1.65 VPC at 77°F (25°C) Discharge Rates (KW per Cell) to 1.67VPC at 77°F (25°C)
Standby Time (Minutes) Standby Time (Minutes)
System Nom System Nom
Cell Type Cell Type
Type Ah 5 10 15 20 30 45 60 Type Ah 5 10 15 20 30 45 60
DDm35-07 2DDm35-072 135 0.445 0.358 0.296 0.252 0.195 0.148 0.121 DDm35-07 2DDm35-072 135 0.432 0.350 0.292 0.250 0.194 0.148 0.121
DDm50-09 2DDmP50-09 200 0.643 0.551 0.486 0.434 0.355 0.281 0.232 DDm50-09 2DDmP50-09 200 0.626 0.539 0.477 0.428 0.352 0.280 0.232
DDm50-13 2DDmP50-13 300 0.964 0.826 0.729 0.651 0.533 0.421 0.348 DDm50-13 2DDmP50-13 300 0.939 0.809 0.716 0.642 0.528 0.420 0.348
DDm50-17 DDmP50-17 400 1.285 1.102 0.973 0.869 0.711 0.561 0.464 DDm50-17 DDmP50-17 400 1.252 1.078 0.954 0.856 0.705 0.560 0.464
DDm85-13 2DDmP85-13 510 1.341 1.199 1.082 0.986 0.840 0.684 0.579 DDm85-13 2DDmP85-13 510 1.299 1.165 1.054 0.963 0.825 0.676 0.574
DDm85-15 2DDmP85-15 595 1.565 1.399 1.262 1.151 0.980 0.798 0.675 DDm85-15 2DDmP85-15 595 1.516 1.360 1.230 1.124 0.962 0.789 0.669
DDm85-21 DDmP85-21 850 2.235 1.998 1.803 1.644 1.400 1.141 0.964 DDm85-21 DDmP85-21 850 2.166 1.942 1.757 1.605 1.375 1.127 0.956
DDm85-25 DDmP85-25 1020 2.682 2.398 2.163 1.973 1.680 1.369 1.157 DDm85-25 DDmP85-25 1020 2.599 2.331 2.108 1.926 1.649 1.352 1.147
DDm85-27 DDmP85-27 1105 2.906 2.598 2.343 2.137 1.820 1.483 1.254 DDm85-27 DDmP85-27 1105 2.815 2.525 2.284 2.087 1.787 1.465 1.243
DDm85-33 DDmP85-33 1360 3.576 3.197 2.884 2.630 2.240 1.825 1.543 DDm85-33 DDmP85-33 1360 3.465 3.108 2.811 2.569 2.199 1.803 1.530
DDm100-21 DDmP100-21 1000 2.523 2.259 2.043 1.868 1.601 1.318 1.121 DDm100-21 DDmP100-21 1000 2.450 2.201 1.995 1.827 1.573 1.302 1.111
DDm100-25 DDmP100-25 1200 3.028 2.711 2.451 2.241 1.922 1.582 1.346 DDm100-25 DDmP100-25 1200 2.940 2.642 2.394 2.193 1.888 1.563 1.333
DDm100-27 DDmP100-27 1300 3.280 2.937 2.655 2.428 2.082 1.713 1.458 DDm100-27 DDmP100-27 1300 3.185 2.862 2.593 2.376 2.045 1.693 1.444
DDm100-33 DDmP100-33 1600 4.037 3.615 3.268 2.988 2.562 2.109 1.794 DDm100-33 DDmP100-33 1600 3.920 3.522 3.192 2.924 2.517 2.083 1.778
DDm125-25 DDmP125-25 1500 3.831 3.453 3.147 2.896 2.492 2.049 1.744 DDm125-25 DDmP125-25 1500 3.717 3.358 3.071 2.833 2.445 2.020 1.726
DDm125-27 DDmP125-27 1625 4.150 3.741 3.410 3.137 2.699 2.219 1.890 DDm125-27 DDmP125-27 1625 4.026 3.638 3.327 3.069 2.648 2.189 1.869
DDm125-33 DDmP125-33 2000 5.108 4.605 4.196 3.861 3.322 2.731 2.326 DDm125-33 DDmP125-33 2000 4.956 4.478 4.094 3.777 3.260 2.694 2.301
Discharge Rates (KW per Cell) to 1.70 VPC at 77°F (25°C) Discharge Rates (KW per Cell) to 1.75 VPC at 77°F (25°C)
Standby Time (Minutes) Standby Time (Minutes)
System Nom System Nom
Cell Type Cell Type
Type Ah 5 10 15 20 30 45 60 Type Ah 5 10 15 20 30 45 60
DDm35-07 2DDm35-072 135 0.412 0.337 0.284 0.245 0.192 0.147 0.121 DDm35-07 2DDm35-072 135 0.374 0.311 0.266 0.232 0.185 0.143 0.119
DDm50-09 2DDmP50-09 200 0.599 0.519 0.461 0.416 0.346 0.277 0.232 DDm50-09 2DDmP50-09 200 0.549 0.481 0.430 0.390 0.331 0.268 0.227
DDm50-13 2DDmP50-13 300 0.898 0.779 0.692 0.624 0.520 0.415 0.348 DDm50-13 2DDmP50-13 300 0.824 0.721 0.644 0.585 0.496 0.403 0.340
DDm50-17 DDmP50-17 400 1.198 1.038 0.923 0.832 0.693 0.554 0.464 DDm50-17 DDmP50-17 400 1.098 0.961 0.859 0.780 0.662 0.537 0.453
DDm85-13 2DDmP85-13 510 1.235 1.110 1.009 0.926 0.797 0.661 0.564 DDm85-13 2DDmP85-13 510 1.118 1.010 0.926 0.855 0.742 0.625 0.541
DDm85-15 2DDmP85-15 595 1.441 1.295 1.178 1.080 0.930 0.771 0.658 DDm85-15 2DDmP85-15 595 1.304 1.178 1.080 0.997 0.866 0.729 0.631
DDm85-21 DDmP85-21 850 2.059 1.850 1.682 1.543 1.329 1.102 0.940 DDm85-21 DDmP85-21 850 1.863 1.683 1.543 1.425 1.237 1.042 0.902
DDm85-25 DDmP85-25 1020 2.470 2.220 2.019 1.851 1.595 1.322 1.128 DDm85-25 DDmP85-25 1020 2.236 2.020 1.852 1.710 1.484 1.250 1.082
DDm85-27 DDmP85-27 1105 2.676 2.405 2.187 2.006 1.728 1.432 1.222 DDm85-27 DDmP85-27 1105 2.422 2.188 2.006 1.852 1.608 1.354 1.172
DDm85-33 DDmP85-33 1360 3.294 2.960 2.692 2.468 2.126 1.763 1.504 DDm85-33 DDmP85-33 1360 2.981 2.693 2.469 2.280 1.979 1.667 1.443
DDm100-21 DDmP100-21 1000 2.337 2.106 1.918 1.762 1.525 1.273 1.092 DDm100-21 DDmP100-21 1000 2.131 1.933 1.774 1.639 1.428 1.206 1.047
DDm100-25 DDmP100-25 1200 2.805 2.527 2.301 2.114 1.829 1.527 1.310 DDm100-25 DDmP100-25 1200 2.557 2.320 2.129 1.967 1.713 1.447 1.257
DDm100-27 DDmP100-27 1300 3.038 2.738 2.493 2.290 1.982 1.655 1.419 DDm100-27 DDmP100-27 1300 2.770 2.513 2.307 2.131 1.856 1.568 1.362
DDm100-33 DDmP100-33 1600 3.740 3.370 3.069 2.819 2.439 2.037 1.747 DDm100-33 DDmP100-33 1600 3.410 3.093 2.839 2.623 2.284 1.929 1.676
DDm125-25 DDmP125-25 1500 3.535 3.208 2.948 2.728 2.364 1.970 1.691 DDm125-25 DDmP125-25 1500 3.205 2.938 2.715 2.521 2.205 1.860 1.611
DDm125-27 DDmP125-27 1625 3.829 3.476 3.194 2.955 2.561 2.135 1.831 DDm125-27 DDmP125-27 1625 3.472 3.183 2.942 2.731 2.389 2.015 1.746
DDm125-33 DDmP125-33 2000 4.713 4.278 3.931 3.637 3.152 2.627 2.254 DDm125-33 DDmP125-33 2000 4.273 3.918 3.621 3.361 2.940 2.479 2.148
Formula
System Height = (Row Height x # of cells high) + 9.0”
System Length = Stack Length x # of stacks
System Weight = Cell Weight x # of cells
Formula 24-DDm85-21
4 cells wide per stack x 6 cells high per stack
System Height = (8.63” x 6) + 9.0” = 60.78”
System Length = 37.15” x 1 = 37.15”
System Weight = 159.0 lbs. x 24 = 3816.0 lbs
Formula 240-DDm125-25
4 cells wide per stack x 6 cells high per stack
System Height = (11.00” x 6) + 9.0” = 75.00” Height
System Length = 44.37” x 10 = 443.70”
System Weight = 269.0 lbs x 240 = 64,560.0 lbs.
Terminal Locations
Terminal
Not Locations
all locations are possible for all configurations.
Width Depth
SAME END SAME SIDE SAME SIDE SAME SIDE
TOP BOTTOM TOP & BOTTOM
AM-DDM-UPS-RS AA April 2018
© 2018 EnerSys. All rights reserved. Trademarks and logos are the property of EnerSys and its affiliates unless otherwise noted. Subject to revisions without prior notice. E.&O.E.