B7760 Boysen Plexibond PDF

Page 1/4
Safety Data Sheet

according to 1907/2006/EC, Article 31
Printing date 15.07.2010 Revision: 15.07.2010
1 Identification of the substance/preparation and of the company/undertaking

· Product details
· Trade name: B7760 BOYSE+ PLEXIBO+D
· Application of the substance / the preparation
Boysen Plexibond is especially formulated acrylic polymer designed for compounding with Pozzolan or
Portland cement. The resulting mixture possesses excellent adhesion, water resistance and flexibility even
on thin section applications. Its use eliminates any cement plastering defects and water seepage, making it
ideal for waterproofing roof decks and firewalls. It makes for a durable and decorative cementitious coating
that not only enhances the appearance of light building materials but also prolongs their service life as well
with its excellent weatherability. It offers excellent corrosion resistance when applied on metal surfaces, and
can also be used to improve adhesion to mortar patching and tile grouts.
· Manufacturer/Supplier:
Pacific Paint (Boysen) Philippines, Inc.
292 D. Tuazon St., Quezon City
1115 Philippines
· Further information obtainable from: Product safety department
· Information in case of emergency:
Telephone 1os. : +63 2 364 3505; +63 2 365 0561
Facsimile 1os. : +63 2 367 8878; +63 2 364 0472
Email Address : [email protected]
Website Address : www.boysen.com.ph
2 Hazards identification
· Hazard description: 1ot applicable.
· Information concerning particular hazards for human and environment:
The product does not have to be labelled due to the calculation procedure of the "General Classification
guideline for preparations of the EU" in the latest valid version.
· Classification system:
The classification is according to the latest editions of the EU-lists, and extended by company and literature
data.
· GHS label elements Void
3 Composition/information on ingredients
· Chemical characterization
· Description: Mixture of substances listed below with nonhazardous additions.
· Dangerous components:
9036-19-5 Polyethylene glycol octylphenyl ether Xn, Xi; R 22-41-52/53 ≤ 2.5%
Danger: 3.1.O/3; 3.3/1
4.1.C/3
· Additional information:
For the wording of the listed risk phrases refer to section 16.
CAS: 7732-18-5 water, distilled, conductivity or of similar purity 50-100%
EI1ECS: 231-791-2
4 First aid measures

· General information: 1o special measures required.
· After inhalation: Supply fresh air; consult doctor in case of complaints.
· After skin contact: Immediately wash with water and soap and rinse thoroughly.
· After eye contact: Rinse opened eye for several minutes under running water.
(Contd. on page 2)
RP
DR
Page 2/4
Safety Data Sheet
Trade name: B7760 BOYSE+ PLEXIBO+D
(Contd. of page 1)
· After swallowing: If symptoms persist consult doctor.
5 Fire-fighting measures
· Suitable extinguishing agents:
CO2, powder or water spray. Fight larger fires with water spray or alcohol resistant foam.
· Protective equipment: 1o special measures required.
6 Accidental release measures

· Person-related safety precautions: 1ot required.
· Measures for environmental protection:
Do not allow product to reach sewage system or any water course.
Inform respective authorities in case of seepage into water course or sewage system.
Dilute with plenty of water.
Do not allow to enter sewers/ surface or ground water.
· Measures for cleaning/collecting:
Absorb with liquid-binding material (sand, diatomite, acid binders, universal binders, sawdust).
· Additional information: 1o dangerous substances are released.
7 Handling and storage

· Handling:
· Information for safe handling: 1o special measures required.
· Information about fire - and explosion protection: 1o special measures required.
· Storage:
· Requirements to be met by storerooms and receptacles: 1o special requirements.
· Information about storage in one common storage facility: 1ot required.
· Further information about storage conditions: 1one.
8 Exposure controls/personal protection

· Additional information about design of technical facilities: 1o further data; see item 7.
· Ingredients with limit values that require monitoring at the workplace:
The product does not contain any relevant quantities of materials with critical values that have to be
monitored at the workplace.
· Additional information: The lists valid during the making were used as basis.
· Personal protective equipment:
· General protective and hygienic measures:
The usual precautionary measures are to be adhered to when handling chemicals.
· Respiratory protection: 1ot required.
· Protection of hands:
The glove material has to be impermeable and resistant to the product/ the substance/ the preparation.
Due to missing tests no recommendation to the glove material can be given for the product/ the preparation/
the chemical mixture.
Selection of the glove material on consideration of the penetration times, rates of diffusion and the
degradation
· Material of gloves
The selection of the suitable gloves does not only depend on the material, but also on further marks of
quality and varies from manufacturer to manufacturer. As the product is a preparation of several
substances, the resistance of the glove material can not be calculated in advance and has therefore to be
checked prior to the application.
(Contd. on page 3)
RP
DR
Page 3/4
Safety Data Sheet
(Contd. of page 2)
· Penetration time of glove material
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
observed.
· Eye protection: Goggles recommended during refilling
9 Physical and chemical properties

· General Information
Form: Fluid
Colour: According to product specification
Odour: Characteristic
· Change in condition
Melting point/Melting range: 0°C
Boiling point/Boiling range: 100°C
· Flash point: 1ot applicable.
· Self-igniting: Product is not selfigniting.
· Danger of explosion: Product does not present an explosion hazard.
· Vapour pressure at 20°C: 23 hPa
· Density at 20°C: 1.03 - 1.05 Kg/Li
· Solubility in / Miscibility with
water: Fully miscible.
· Viscosity: 100 - 300 cps
· Solvent content:
Organic solvents: 0.0 %
Water: 97.0 %
VOC (EC) 0.00 %
· Solids content: 2.5 %
10 Stability and reactivity

· Thermal decomposition / conditions to be avoided: 1o decomposition if used according to specifications.
· Dangerous reactions 1o dangerous reactions known.
· Dangerous decomposition products: 1o dangerous decomposition products known.
11 Toxicological information
· Acute toxicity:
· Primary irritant effect:
· on the skin: Cause mild irritation
· on the eye: 1o irritating effect.
· Sensitization: 1o sensitizing effects known.
· Additional toxicological information:
The product is not subject to classification according to the calculation method of the General EU
Classification Guidelines for Preparations as issued in the latest version.
When used and handled according to specifications, the product does not have any harmful effects to our
experience and the information provided to us.
RP
(Contd. on page 4)
DR
Page 4/4
Safety Data Sheet

(Contd. of page 3)
12 Ecological information
· General notes:
Water hazard class 1 (German Regulation) (Self-assessment): slightly hazardous for water
Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage
system.
13 Disposal considerations
· Product:
· Recommendation Smaller quantities can be disposed of with household waste.
· Uncleaned packaging:
· Recommendation: Disposal must be made according to official regulations.
· Recommended cleansing agents: Water, if necessary together with cleansing agents.
14 Transport information
· Maritime transport IMDG:
· Marine pollutant: 1o
15 Regulatory information
· Philippines Inventory of Chemicals and Chemical Substances
9036-19-5 Polyethylene glycol octylphenyl ether
· Labelling according to EU guidelines:

Observe the general safety regulations when handling chemicals.
The product is not subject to identification regulations under EU Directives and the Ordinance on
Hazardous Materials (German GefStoffV).
· Safety phrases:
29/56 Do not empty into drains, dispose of this material and its container at hazardous or special waste
collection point.
· Special labelling of certain preparations:
Safety data sheet available for professional user on request.
16 Other information
This information is based on our present knowledge. However, this shall not constitute a guarantee for any
specific product features and shall not establish a legally valid contractual relationship.
· Relevant R-phrases
22 Harmful if swallowed.
41 Risk of serious damage to eyes.
52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment.
· Department issuing MSDS:
Safety, Health and Environment Department
Gretchen A. Fontejon - [email protected]
Joanne C. Ysrael - [email protected]
· Abbreviations and acronyms:
IMDG: International Maritime Code for Dangerous Goods
GHS: Globally Harmonized System of Classification and Labelling of Chemicals
VOC: Volatile Organic Compounds (USA, EU)
· * Data compared to the previous version altered. 15.07.2010
RP
DR

B7760 Boysen Plexibond PDF

Uploaded by

Copyright:

Available Formats

B7760 Boysen Plexibond PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

B7760 Boysen Plexibond PDF

Uploaded by

Copyright:

Available Formats

Page 1/4

Safety Data Sheet

1 Identification of the substance/preparation and of the company/undertaking

4 First aid measures

Trade name: B7760 BOYSE+ PLEXIBO+D

6 Accidental release measures

7 Handling and storage

8 Exposure controls/personal protection

Trade name: B7760 BOYSE+ PLEXIBO+D

9 Physical and chemical properties

10 Stability and reactivity

Trade name: B7760 BOYSE+ PLEXIBO+D

· Labelling according to EU guidelines:

You might also like