Scribd Logo
Upload

Welcome to Scribd!

  • 39 views

    Pages From 1-2

    Uploaded by

    Andy
    This document contains the results of soil testing at 4 bore hole locations. The testing was conducted by Apex Engineers and Consultants to determine the safe bearing capacity of the soil at various depths. The document provides the bore hole number, depth, soil properties, calculation factors and formulas used to determine the safe bearing capacity in tons per square meter. The safe bearing capacities range from 12.72 to 46.34 tons/sqm depending on the bore hole location and depth.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Pages From 1-2

    Uploaded by

    Andy
    39 views6 pages
    This document contains the results of soil testing at 4 bore hole locations. The testing was conducted by Apex Engineers and Consultants to determine the safe bearing capacity of the soil at various depths. The document provides the bore hole number, depth, soil properties, calculation factors and formulas used to determine the safe bearing capacity in tons per square meter. The safe bearing capacities range from 12.72 to 46.34 tons/sqm depending on the bore hole location and depth.

    Original Description:

    COL

    Original Title

    Pages from 1-2

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document contains the results of soil testing at 4 bore hole locations. The testing was conducted by Apex Engineers and Consultants to determine the safe bearing capacity of the soil at various depths. The document provides the bore hole number, depth, soil properties, calculation factors and formulas used to determine the safe bearing capacity in tons per square meter. The safe bearing capacities range from 12.72 to 46.34 tons/sqm depending on the bore hole location and depth.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    39 views6 pages

    Pages From 1-2

    Uploaded by

    Andy
    This document contains the results of soil testing at 4 bore hole locations. The testing was conducted by Apex Engineers and Consultants to determine the safe bearing capacity of the soil at various depths. The document provides the bore hole number, depth, soil properties, calculation factors and formulas used to determine the safe bearing capacity in tons per square meter. The safe bearing capacities range from 12.72 to 46.34 tons/sqm depending on the bore hole location and depth.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 6

    APEX ENGINEERS AND CONSULTANTS MATERIAL TESTING LABORATORY

    ADDRESS:
    OFFICE:G-36/104, SANJAY PLACE,AGRA(UP)
    LAB.:SHASHINAGAR,SIKANDRA,AGRA(UP) E-
    mail:[email protected],[email protected]
    Ph.: 0562-4003705

    ISO 9001:2008

    Bore Hole No. BH01


    Depth Df 6
    N= 12
    Φ= 31

    n
    qd= q(Nq - 1) sqdqiq + 1/2 B γ N γ s γd γi γW 46.34 T/sqm

    effective surcharge at base level of


    q= foundation 0
    N q= bearing capacity factor 18.4
    N γ= bearing capacity factor 22.4
    sq = shape factor 1.2
    sγ = shape factor 0.8
    ic=iq
    = Inclination factor 1
    iγ = Inclination factor 1
    dq = depth factors 1.53
    dγ = depth factors 1.53
    Width of strip fpooting, width of
    footing,side of square footing, dia. Of
    B= circuler footing 2
    Wn= correction factor for location of water table 1
    γ= Bulk unit weight of foundation soil 1.69

    F.S.= 3
    Safe bearing capacity of soil= 15.45 T/sqm

    20
    APEX ENGINEERS AND CONSULTANTS MATERIAL TESTING LABORATORY
    ADDRESS:
    OFFICE:G-36/104, SANJAY PLACE,AGRA(UP)
    LAB.:SHASHINAGAR,SIKANDRA,AGRA(UP) E-
    mail:[email protected],[email protected]
    Ph.: 0562-4003705

    ISO 9001:2008

    Bore Hole No. BH02


    Depth Df 1
    N= 3
    Φ= 28

    n
    qd= q(Nq - 1) sqdqiq + 1/2 B γ N γ s γd γi γW 30.09 T/sqm

    effective surcharge at base level of


    q= foundation 0
    N q= bearing capacity factor 15.5
    N γ= bearing capacity factor 19.4
    sq = shape factor 1.2
    sγ = shape factor 0.8
    ic=iq
    = Inclination factor 1
    iγ = Inclination factor 1
    dq = depth factors 1.08
    dγ = depth factors 1.08
    Width of strip fpooting, width of
    footing,side of square footing, dia. Of
    B= circuler footing 2
    Wn= correction factor for location of water table 1
    γ= Bulk unit weight of foundation soil 1.79

    F.S.= 3
    Safe bearing capacity of soil= 10.03 T/sqm

    21
    APEX ENGINEERS AND CONSULTANTS MATERIAL TESTING LABORATORY
    ADDRESS:
    OFFICE:G-36/104, SANJAY PLACE,AGRA(UP)
    LAB.:SHASHINAGAR,SIKANDRA,AGRA(UP) E-
    mail:[email protected],[email protected]
    Ph.: 0562-4003705

    ISO 9001:2008

    Bore Hole No. BH02


    Depth Df 2
    N= 7
    Φ= 28

    n
    qd= q(Nq - 1) sqdqiq + 1/2 B γ N γ s γd γi γW 29.87 T/sqm

    effective surcharge at base level of


    q= foundation 0
    N q= bearing capacity factor 15.5
    N γ= bearing capacity factor 19.4
    sq = shape factor 1.2
    sγ = shape factor 0.8
    ic=iq
    = Inclination factor 1
    iγ = Inclination factor 1
    dq = depth factors 1.17
    dγ = depth factors 1.17
    Width of strip fpooting, width of
    footing,side of square footing, dia. Of
    B= circuler footing 2
    Wn= correction factor for location of water table 1
    γ= Bulk unit weight of foundation soil 1.65

    F.S.= 3
    Safe bearing capacity of soil= 9.96 T/sqm

    22
    APEX ENGINEERS AND CONSULTANTS MATERIAL TESTING LABORATORY
    ADDRESS:
    OFFICE:G-36/104, SANJAY PLACE,AGRA(UP)
    LAB.:SHASHINAGAR,SIKANDRA,AGRA(UP) E-
    mail:[email protected],[email protected]
    Ph.: 0562-4003705

    ISO 9001:2008

    Bore Hole No. BH01


    Depth Df 3
    N= 10
    Φ= 30

    n
    qd= q(Nq - 1) sqdqiq + 1/2 B γ N γ s γd γi γW 38.15 T/sqm

    effective surcharge at base level of


    q= foundation 0
    N q= bearing capacity factor 18.4
    N γ= bearing capacity factor 22.4
    sq = shape factor 1.2
    sγ = shape factor 0.8
    ic=iq
    = Inclination factor 1
    iγ = Inclination factor 1
    dq = depth factors 1.26
    dγ = depth factors 1.26
    Width of strip fpooting, width of
    footing,side of square footing, dia. Of
    B= circuler footing 2
    Wn= correction factor for location of water table 1
    γ= Bulk unit weight of foundation soil 1.69

    F.S.= 3
    Safe bearing capacity of soil= 12.72 T/sqm

    23
    APEX ENGINEERS AND CONSULTANTS MATERIAL TESTING LABORATORY
    ADDRESS:
    OFFICE:G-36/104, SANJAY PLACE,AGRA(UP)
    LAB.:SHASHINAGAR,SIKANDRA,AGRA(UP) E-
    mail:[email protected],[email protected]
    Ph.: 0562-4003705

    ISO 9001:2008

    Bore Hole No. BH01


    Depth Df 4
    N= 10
    Φ= 30

    n
    qd= q(Nq - 1) sqdqiq + 1/2 B γ N γ s γd γi γW 40.78 T/sqm

    effective surcharge at base level of


    q= foundation 0
    N q= bearing capacity factor 18.4
    N γ= bearing capacity factor 22.4
    sq = shape factor 1.2
    sγ = shape factor 0.8
    ic=iq
    = Inclination factor 1
    iγ = Inclination factor 1
    dq = depth factors 1.35
    dγ = depth factors 1.35
    Width of strip fpooting, width of
    footing,side of square footing, dia. Of
    B= circuler footing 2
    Wn= correction factor for location of water table 1
    γ= Bulk unit weight of foundation soil 1.69

    F.S.= 3
    Safe bearing capacity of soil= 13.59 T/sqm

    24
    APEX ENGINEERS AND CONSULTANTS MATERIAL TESTING LABORATORY
    ADDRESS:
    OFFICE:G-36/104, SANJAY PLACE,AGRA(UP)
    LAB.:SHASHINAGAR,SIKANDRA,AGRA(UP) E-
    mail:[email protected],[email protected]
    Ph.: 0562-4003705

    ISO 9001:2008

    7.12 Bearing Capacity from Shear Strength consideration – Direct Measurement of Strength Parameters

    At BH2 location top layer up to depth 1.50m is CI clay of medium plasticity for which direct

    measurement of the strength parameters shall be utilized to calculate the safe bearing capacity

    25

    You might also like