Gear Catalogo

STEERING REBUILDERS & TRUCK PARTS, INC.
764 CR 383 - CLEVELAND, TEXAS 77327

Phone: #281/386-7229 Fax: #281/432-1332 Web: www.srtp.us
“POWER & MANUAL”

STEERING
GEARS
MEDIUM & HEAVY DUTY TRUCK APPLICATIONS
BENDIX SAGINAW
GEMMER SHEPPARD
NIPPON TRW
MD / HD GEAR STEERING ZF
ROSS Catalog #5G
Revised - MAY 2013 LENKSYSTEME
S.R.T.P., INC.
764 COUNTY ROAD 383 - CLEVELAND, TEXAS 77327
PHONE: (281) 386-7229 FAX: (281) 432-1332 E-MAIL: [email protected]
TABLE OF CONTENTS
“GEAR IDENTIFICATION”
BENDIX:
C300N, C500, C500N Gears & Parts: Page #’s 2-4
ISUZU:
Gear & Parts: Page #’s 5-6
ROSS / TRW (POWER STEERING):
RC, RCB, RCS Series Slave Gears & Parts: Page # 7
HF54 / HF64 Series Gears & Parts: Page #’s 8-13
HFB52, 64, 70 Series Gears & Parts: Page #’s 14-21
TAS40, 55, 65, 85 Series Gear & Parts: Page #’s 22-27
HP71, HPS53, HPS71, HPS72 Series Gears & Parts: Page #’s 28-32
ROSS / TRW (MANUAL STEERING):
503, 504, 7DC, 35JC, 408, TD & TE Series Gears & Parts: Page #’s 33-38
SAGINAW:
SEMI-INGEGRAL / 4 HOSE Gears & Parts: Page #’s 39-40
DUAL PISTON / 710 Series Gears & Parts: Page #’s 41-43
MANUAL (Large & Small) Gears & Parts: Page #’s 44-46
SHEPPARD:
292 - 592 Series Gears & Parts: Page #’s 47-51
M80 - M110 Series Gears & Parts: Page #’s 52-58
ZF LENKSYSTEME:
Gears & Parts: Page #’s 59-63
SPECIAL NOTE:
This website has been designed as a aid to make it easier for you (the customer) to properly identifying a
particular Steering Gear. To identify a particular Steering Gear, it will require you to look your Steering
Gear over to get any Name Brand or any Part Numbers that can be possibly found. The catalog is broke
down in various sections that pertain to the common brands of Steering Gears found on the market to-
day. If you have the name brand such as Ross, Sheppard & Etc., then look in the “Table of Contents”
shown above for that particular illustration section of catalog to ID. If you have the Part Number off of
the unit or the OEM Number from the dealer, Please call us at (281) 386-7229 for “Price & Availability”.
“REMANUFACTURED”
“BENDIX” STEERING GEARS

“C300, C500 & C500N” SERIES
Typical “C300N” & “C500N” w/ Clamp Sector

Commonly found on Ford “F600-F800”
Illustration #1 Illustration #2 Illustration #3
ORDER “BENDIX” gear with raised

casted number as shown in both
illustrations (1) an (2) above:
Casting #2260377 =
SRTP #C300N
Casting #2260351 =
SRTP #C500N Clamp Sector
Typical “C500” w/ Nut Sector. Commonly

found on Ford “Cargo” Applications
Illustration #5
Illustration #4
ORDER “BENDIX C500” gear with:

#1- Raised casted number as show in
illustration (5) above.
#2 Type of Ports:
O-Ring Ports =
SRTP #2268006-O
Threaded / Nut Ports
Inverted Flare Ports =
type sector SRTP #2268006-I
2
“BENDIX” STEERING GEARS

“COMMON NUMBERS”
OEM and / or SRTP Part NOTES

Casting Number Number
106119 C300N
109762 C300N
213309 C300N
234034 C300N
254040 2268006-O or 2268006– I Will need to verify Port type. See previous page for details
254062 C300N
254067 C500N
2260351 C500N
2260377 C300N
2261699 C300N
2261701 2268006-O or 2268006- I Will need to verify Port type. See previous page for details
2268244 C500N
2268273 C300N
2268316 C300N
2268350 C300N
2268351 C300N
2268352 C500N
2268371 C300N
2268372 C500N
2268374 C300N
2268006BFI 2268006-O or 2268006- I Will need to verify Port type. See previous page for details
3
“BENDIX” GEARS
“C300, C500 & C500N” SERIES
“SEAL KITS & PARTS”
PART TYPE SEAL KIT SRTP # PART TYPE SEAL KIT SRTP #
CONTENTS CONTENTS
SEAL KIT Contains Item #’s SEAL KIT Contains Item #’s
OEM Seal Kit # 2, 4, 5, 10, 11, 12, C300N-SK OEM Seal Kit # 2, 4, 5, 10, 11, 12,C500N-SK
E8HZ3L548A 14, 15, 18, 20, 29, E9HZ3L548A & B 14, 15, 18, 20, 29,
(For Gear 37, 38, 39 & 47 (For Gear 37, 38, 39 & 47
w/ Casting NOTE: No other w/ Casting NOTE: No other
#2260377) parts are available! #2260351) parts are available!
4
“ISUZU” STEERING GEARS

“NPR” SERIES
TO ORDER THIS GEAR, WE WILL NEED TO KNOW “YEAR, MAKE, MODEL OF TRUCK
INCLUDING NUMBERS LOCATED ON MFG. TAG AS SHOWN IN ILLUSTRATION BELOW.
ONCE YOU HAVE THIS INFORMATION, PLEASE CALL (281) 386-7229.
“MFG. TAG NUMBER” “CASTING NUMBER”

ORDER ISUZU gear with Stamped # located on Mfg. DO NOT ORDER gear with raised Casted
Tag as shown in the AREA where the BOLD ARROW number. Refer to illustrations below for
is pointing. Mfg. Stamped # starts with “89” fol- example.
lowed by (7) numbers. Refer to illustration below
for example.
Note: It maybe necessary to wire brush the areas!
TYPICAL “ISUZU” NPR GEAR

(SHOWN BELOW)
NOTE:
Pitman Arm is Not supplied
with Remanufactured Unit.
5
“ISUZU” STEERING GEARS

“NPR” SERIES
PART TYPE CONTENTS SRTP PART PART TYPE CONTENTS SRTP PART
NUMBER NUMBER
Seal Kit Item #’s SK9720-PC Sector Bearing Item #20 947-PC
OEM #8-94134101-0 1 - 19 2 Required
Typical “NPR” Series Gear Parts Breakdown
20
6
“ROSS & TRW” STEERING GEARS

“RC64, RCB52, RCB64, RCB70, RCS40, RCS55, RCS65, RCS85” SERIES
ASSIST / SLAVE GEARS
TO ORDER “ASSIST / SLAVE” GEARS, YOU WILL NEED TO KNOW

“MFG. STAMPED NUMBER” AS SHOWN BELOW.
“MFG. STAMPED NUMBER” “CASTING NUMBER”

ORDER “ASSIST / SLAVE” Series gears with DO NOT ORDER “RC, RCB or RCS” series gears
Mfg. stamped / stenciled # located in the AREAS with raised casting number. Casting numbers
where the BOLD ARROWS are pointing. Mfg. stamp start with “RC, RCB or RCB”
#’s start with “RC, RCB or RCS” followed by (5) followed by (6) numbers. Refer to
numbers. Refer to illustration below for example.
illustration below for example.
Typical “RC64” Series Typical “RCB” Series
ILLUSTRATION (1) ILLUSTRATION (2)
Typical “RCS” Series Typical “RCS” Series
7

“HF54” SERIES
TO ORDER “HF54” SERIES GEARS, YOU WILL NEED TO KNOW

ORDER “HF54” Series gears with Mfg. stamped / DO NOT ORDER “HF54” series gears with raised
stenciled # located in the AREAS where the BOLD casting number! Casting numbers start with
ARROWS are pointing. Mfg. stamp #’s start with “HF” followed by (6) numbers.
“HF” followed by (5) numbers. Refer to illustration Refer to illustrations below for example.
below for example.
Common “HF54” ILLUSTRATION (1)

Series Sector Shafts
Clamp Type
“Partial Splined
Clamp Type
“Full Splined”
Nut Type Mfg.’s number maybe

On gears w/ Casting #’s HF542996 &
located on side of gear
HF542999. It maybe necessary to get
right below Sector Shaft.
# stamped on end of Sector Shaft.
It maybe necessary to
#104 or #107 may be stamped .
turn gear on its side and
wire brush the area.
Other common “HF54” Series Gears
8

“HF54” SERIES
“COMMON PART NUMBERS”
HF54012
HF54028
HF54034
HF54038
HF54040
HF54042
HF54043
HF54044
HF54050
HF54053
HF54059
HF54060
Note: For Numbers not Listed, Please call (281) 386-7229
9

“HF54” SERIES
“SEAL KITS”
PART TYPE CONTENTS SRTP # PART TYPE CONTENTS SRTP #
Input Seal Kit Item #’s 1, 2 & 3 4511IK Upper Sector Seal Item #’s 16, 17, 18 4510SK
Kit & 23
Complete Seal Kit Item #’s 1 - 23 8307 Lower Sector Seal Item #’s 17, 18, 4509SK
For all Numbers Kit 20 & 21
Typical “HF54” Series Gear Parts Breakdown
19
10

“HF64” SERIES
TO ORDER “HF64” SERIES GEARS, YOU WILL NEED TO KNOW
“MFG. STAMPED” NUMBER AS SHOWN BELOW.

ORDER “HF64” Series gears with Mfg. stamped / DO NOT ORDER “HF64” series gears with raised
stenciled # located in the AREAS where the BOLD casting number. Casting numbers start with “HF”
ARROWS are pointing. Mfg. stamp #’s start with followed by (6) numbers. Refer to illustrations be-
“HF” followed by (5) numbers. Refer to illustration low for example.
below for example.
Mfg.’s Stamped number maybe

located on side of gear right “SPECIAL NOTE” For #’s HF64061,
below Sector Shaft. HF64062,
On R-Model MackHF64088, HF64101,
(Inside Frame Mount
It maybe necessary to turn gear Applications) w/ Gear
on its side and wire brush the
HF64113 & having
HF64114Casting
#HF642984 It maybe necessary to verify
area.
length of shaft protruding out of housing.
Measure from trunion cover out to end of
shaft. Shaft length can measure between
4” up to 5.25” long. Below is a typical
picture.
ILLUSTRATION (1)
ILLUSTRATION (2)
ILLUSTRATION (3) Other common “HF64” ILLUSTRATION (5)

Series Gears shown in
illustrations (3) thru (6)
11

“HF64” SERIES
HF64045 HF64092
HF64061 HF64093
HF64063 HF64101
HF64066 HF64102
HF64067 HF64107
HF64071 HF64111
HF64072 HF64112
HF64075 HF64113
HF64076 HF64114
HF64077 HF64119
HF64079 HF64122
HF64080 HF64123
HF64088 HF64128
HF64090 HF64129
HF64091
12

“HF64” SERIES
Input Seal Kit Item #’s 4511IK Lower Sector Seal Kit Items # 4512SK
1, 2, 3 17, 18, 20 & 21
Complete Seal Kit All #’s excluding 8308 Sector Shaft for Gears
for al Numbers #’s 1 thru 23 w/ Casting #’s Item #19 S7943
HF642981, HF642988,
HF642989, HF642990
Upper Sector Seal Items # 4512SK Sector Shaft Bearing Item #25 Call
Kit 16, 17, 18 & 23 281/386-
7229
Typical “HF64” Series Gear Parts Breakdown
19 25
13

“HFB52” SERIES
TO ORDER “HFB52” SERIES GEARS, YOU WILL NEED TO KNOW

ORDER “HFB52” Series gears with Mfg. DO NOT ORDER “HFB” series gears with raised
stamped # located in the AREAS where the casting number. Casting numbers start with
BOLD ARROWS are pointing. Mfg. stamp #’s “HFB” followed by (6) numbers. Refer to
start with “HFB” followed by (5) numbers. illustration below for example.
Refer to illustration below for example.
ILLUSTRATION (1)
“COMMON” HFB52
SERIES NUMBERS
HFB52011
HFB52012
HFB52013
HFB52014
HFB52016
HFB52017
Typical “HFB52” series gears HFB52023

(Shown in Illustrations 1 thru 3)
HFB52028
HFB52033
Note: For Numbers not Listed,

Please call (281) 386-7229
14

“HFB52” SERIES SEAL KITS & PARTS

Input Seal Kit Item #’s 4541IK Complete Seal Kit for all Item #’s 8309
1, 2, 3, 4 & 5 Numbers 1 thru 33
Upper Sector Seal Kit Item #’s 4522SK Sector Shaft for Gears w/ Item #34 S-4936
28, 30, 31 & Stamped #’s HFB52013,
32 HFB52014, HFB52023
Lower Sector Seal Kit Item #’s 4523SK Sector Shaft Bearing(s) Item #24, F212083.1
22. 23, 25 #35
Typical “HFB52” Series Gear Parts Breakdown
15

“HFB64” SERIES

ORDER “HFB64” Series gears with Mfg. DO NOT ORDER “HFB” series gears with raised
stamped # located in the AREAS where the casting number. Casting numbers start with
BOLD ARROWS are pointing. Mfg. stamp #’s “HFB” followed by (6) numbers. Refer to
start with “HFB” followed by (5) numbers. illustration below for example.
Refer to illustration #1 below for example.
ILLUSTRATION (1)
Typical “HFB64” Series Gears
(Shown in illustrations 1 thru 7)
ILLUSTRATION (2) ILLUSTRATION (3) ILLUSTRATION (6) ILLUSTRATION (7)
16

“HFB64” SERIES
HFB64003 “ HFB64071
HFB64005 HFB64073
HFB64006 HFB64079
HFB64008 HFB64080
HFB64010 HFB64082
HFB64012 HFB64083
HFB64016 HFB64084
HFB64025 HFB64085
HFB64026 HFB64086
HFB64029 HFB64088
HFB64031 HFB64090
HFB64033 HFB64093
HFB64042 HFB64095
HFB64043 HFB64098
HFB64044 HFB64099
HFB64046 HFB64103
HFB64047 HFB64104
HFB64050 HFB64105
HFB64055 HFB64114
HFB64057 HFB64115
HFB64058 HFB64126
HFB64060 HFB64128
HFB64062 HFB64137
HFB64063 HFB64138
17

Input Seal Kit Item #’s 4541IK Complete Seal Kit for all All Item #’s 8310
1, 2, 3, 4 & 5 Numbers 1 thru 30
Upper Sector Seal Item #’s 4542SK Sector Shaft for Gears w/ Item #32 S-4590
Kit 21, 22, 23, 24 Casting #’s
HFB642962, 63,78 & Etc
Lower Sector Seal Item #’s 27, 4543SK (2) Sector Shaft Bearings Item #33 F66203.3
Kit 28
33
32
33
18

“HFB70” SERIES
“MFG. STAMPED / STENCILED NUMBER” AS SHOWN BELOW.

ORDER “HFB70” Series gears with Mfg. DO NOT ORDER “HFB” series gears with
stamped / stenciled # located in the AREAS raised casting number as shown below.
where the BOLD ARROWS are pointing (See Casting numbers start with “HFB” followed
illustration 1). Mfg. stamp #’s start with “HFB” by (6) numbers. Refer to illustration below
followed by (5) numbers. Refer to illustration for example.
below for example.

ILLUSTRATION (1)
Typical “HFB70” Series Gears

ILLUSTRATION (4)
ILLUSTRATION (2) ILLUSTRATION (3) ILLUSTRATION (5)
19

“HFB70” SERIES
HFB70014
HFB70022
HFB70029
HFB70030
HFB70033
HFB70037
HFB70042
HFB70045
HFB70049
HFB70054
HFB70063
HFB70065
HFB70068
HFB70070
HFB70071
HFB70080
HFB70081
HFB70083
HFB70086
HFB70089
HFB70093
HFB70094
HFB70096
HFB70097
HFB70113
HFB70114
HFB70130
HFB70131
20

Input Seal Kit Item #’s 4531IK Complete Seal Kit for All Item #’s 8311
1, 2, 3, 4 & 5 all Numbers 1 thru 30
Upper Sector Seal Item #’s 4532SK Sector Shaft for Gears w/ Item #32 S-4590
Kit 21, 22, 23, 24 Casting #’s HFB702992,
HFB702993
Lower Sector Seal Item #’s 27 & 4533SK (2) Sector Shaft Item #33 072001
Kit 28, 29 Bearing(s)
33
32
33
21
“TRW” STEERING GEARS

“TAS37, TAS40, TAS55, TAS65 & TAS85, THP45 & THP60, PCF45 & PCF60”
TO ORDER “TAS”, “THP” OR “PCF” SERIES GEARS, YOU WILL NEED TO KNOW

ORDER “TAS”, “THP” or “PCF” Series gears with DO NOT ORDER “TAS”, “THP” or “PCF” series
Mfg. stamped # located in the AREA where the gears with raised casting number. Casting
BOLD ARROW is pointing. Mfg. stamp #’s start with numbers start with “TAS”, “THP” or “PCF”
“TAS”, “THP”, “PCF” followed by (5) numbers. followed by (6) numbers. Refer to illustrations
Refer to illustrations below for example. Note: It
below for example.
maybe necessary to wire brush the area!
TAS65007
ILLUSTRATION (1) Typical “TAS / THP” Series Gears

Note: See the ILLUSTRATION (7) ILLUSTRATION (8)

following (2) pages
for “Common Part
Numbers” available.
ILLUSTRATION (2) ILLUSTRATION (3) ILLUSTRATION (4) ILLUSTRATION (9) ILLUSTRATION (10)
22

“TAS40” , “TAS55”, “TAS65” & “TAS85” SERIES
NOTE: SOME “TAS” PART NUMBERS WILL BE FOLLOWED BY THE FOLLOWING
LETTER CODE SUCH AS: “A”, “AX”, “X”, “R” OR “RX”. (EXAMPLE: TAS65024A,
TAS85062AX) WHEN ORDERING “TAS” SERIES GEARS, IT IS NOT NECESSARY TO
ADD THE LETTER CODE “A”, “AX”, “X” ,“R” OR “RX”.
RCS40002 TAS40037 TAS65015 TAS65070
RCS40003 TAS40042 TAS65017 TAS65071
RCS55001 TAS40044 TAS65019 TAS65072
RCS65001 TAS40046 TAS65020 TAS65073
RCS65002 TAS55001 TAS65023 TAS65074
RCS65005 TAS55003 TAS65024 TAS65076
RCS65010 TAS55005 TAS65025 TAS65079
RCS65012 TAS55006 TAS65026 TAS65080
RCS85004 TAS55008 TAS65027 TAS65083
RCS85005 TAS55010 TAS65028 TAS65086
TAS37001 TAS55012 TAS65029 TAS65087
TAS37002 TAS55015 TAS65032 TAS65090
TAS37003 TAS55016 TAS65033 TAS65092
TAS40001 TAS65001 TAS65035 TAS65093
TAS40002 TAS65003 TAS65040 TAS65094
TAS40005 TAS65004 TAS65042 TAS65095
TAS40006 TAS65005 TAS65047 TAS65098
TAS40007 TAS65006 TAS65048 TAS65099
TAS40008 TAS65007 TAS65052 TAS65100
TAS40009 TAS65008 TAS65054 TAS65101
TAS40013 TAS65009 TAS65057 TAS65102
TAS40017 TAS65010 TAS65058 TAS65104
TAS40018 TAS65012 TAS65059 TAS65105
TAS40021 TAS65013 TAS65064 TAS65106
TAS40024 TAS65014 TAS65065 TAS65109
23

“TAS40” , “TAS55”, “TAS65” & “TAS85” SERIES
NOTE: SOME “TAS” PART NUMBERS WILL BE FOLLOWED BY THE FOLLOWING
LETTER CODE SUCH AS: “A”, “AX”, “X”, “R” OR “RX”. (EXAMPLE: TAS65024A,
TAS85062AX) WHEN ORDERING “TAS” SERIES GEARS, IT IS NOT NECESSARY TO
ADD THE LETTER CODE “A”, “AX”, “X” ,“R” OR “RX”.
TAS65111 TAS65218 TAS85036 TAS85154

TAS65112 TAS65219 TAS85038 THP45001
TAS65114 TAS66001 TAS85040 THP45002
TAS65115 TAS66002 TAS85044 THP60001
TAS65118 TAS66003 TAS85048 THP60002
TAS65119 TAS66004 TAS85049 THP60003
TAS65122 TAS66007 TAS85051 THP60004
TAS65127 TAS85001 TAS85052 THP60005
TAS65129 TAS85002 TAS85055 THP60006
TAS65130 TAS85003 TAS85059 THP60007
TAS65132 TAS85005 TAS85062 THP60008
TAS65142 TAS85006 TAS85070 THP60009
TAS65143 TAS85008 TAS85073 THP60010
TAS65150 TAS85009 TAS85076 THP60011
TAS65155 TAS85010 TAS85083 THP60012
TAS65157 TAS85013 TAS85100
TAS65166 TAS85016 TAS85129
TAS65174 TAS85018 TAS85131
TAS65183 TAS85020 TAS85133
TAS65191 TAS85021 TAS85134
TAS65196 TAS85024 TAS85138
TAS65198 TAS85028 TAS85142
TAS65203 TAS85029 TAS85145
TAS65204 TAS85032 TAS85147
TAS65208 TAS85033 TAS85151
24

“TAS65” & “TAS85” SERIES
TYPICAL “TAS37” & “TAS40” Series TYPICAL “TAS55” Series
Parts Listing Parts Listing
TAS37 Seal Kit Items #’s 1 - 20 8890 TAS55 Seal Kit Item #’s 1 - 20 8094
All Numbers All Numbers
TAS40 Seal Kit Item #’s 1 - 20 8102 Sector Shaft Item #23 32DU16
Bushing
Input Seal Kit Item #’s 1, 2, 3 8800 Input Seal Kit Item #’s 1, 2, 3 8800
Sector Seal Kit Item #’s 8888 Sector Shaft Item #21 TAS554100A10363
14, 15, 16
Sector Shaft Item #23 24DU16 Sector Seal Kit Item #’s 8868
Bushing 14, 15, 16
Typical “TAS ” Series Gear

Parts Breakdown
23
21
22
NOTE: TO ORDER COMPLETE SEAL

KIT, WE WILL NEED TO KNOW WHAT
SERIES STEERING GEAR YOU HAVE:
TAS37, TAS40, TAS55, TAS65 OR
TAS85?? THIS CAN BE DETERMINED
BY FINDING “STAMPED / STENCILED
NUMBER” LOCATED ON BACK END
OF STEERING GEAR. LOOK WHERE
“BOLD ARROW” IS POINTING.
NOTE: IT MAY BE NECESSARY TO
WIRE BRUSH THE AREA TO
LOCATE NUMBER.
25

“TAS65” & “TAS85” SERIES
TYPICAL “TAS65” Series Parts Listing TYPICAL “TAS85” Series Parts Listing
Complete Item #’s 1 - 20 8101 Complete Item #’s 1 - 20 8103
TAS65 Seal Kit TAS85 Seal Kit
Sector Shaft Item #23 32DU16 Sector Shaft Item #21 S-4590
Bushing
Input Seal Kit Item #’s 1, 2, 3 8800 Input Seal Kit Item #’s 1, 2, 3 8800
Sector Shaft Item #21 S-4935 Sector Shaft Item #14 478084
Seal
Case Bearing Item #22 F209274.1 Sector Shaft Item #22 941-PC
Bearing
Typical “TAS ” Series Gear

Parts Breakdown
23
21
22
NOTE: TO ORDER COMPLETE SEAL

KIT, WE WILL NEED TO KNOW WHAT
SERIES STEERING GEAR YOU HAVE:
TAS37, TAS40, TAS55, TAS65 OR
TAS85?? THIS CAN BE DETERMINED
BY FINDING “STAMPED / STENCILED
NUMBER” LOCATED ON BACK END
OF STEERING GEAR. LOOK WHERE
“BOLD ARROW” IS POINTING. NOTE:
IT MAY BE NECESSARY TO WIRE
BRUSH THE AREA TO
LOCATE NUMBER.
26

TYPICAL “THP45, THP60, PCF45, PCF60” SERIES
“SEAL KITS”

Seal Kit All Seals, Gaskets Call Seal Kit All Seals, Gaskets Call
PCF45 Series & O-rings 281/386-7229 PCF60 Series & O-rings 281/386-7229
Seal Kit All Seals, Gaskets 8881 Seal Kit All Seals, Gaskets 8869
THP45 Series & O-rings THP60 Series & O-rings
NOTE: TO ORDER COMPLETE SEAL KIT, WE WILL NEED TO KNOW

WHAT SERIES STEERING GEAR YOU HAVE: PCF45, PCF60, THP45
OR THP60?? THIS CAN BE DETERMINED BY FINDING
“STAMPED / STENCILED NUMBER” LOCATED ON BACK END OF
STEERING GEAR. LOOK WHERE “BOLD ARROW” IS POINTING.
NOTE: IT MAY BE NECESSARY TO WIRE BRUSH THE AREA TO
LOCATE NUMBER.
TYPICAL PICTURE ILLUSTRATION
27

“HS71”, “HPS53”, “HPS71” & “HPS72” SERIES
(NOTE: Call for “P&A” . Depending on parts availability, these gears may be “R&R” only.)
TO ORDER “HS71, HPS53, HPS71 & HPS72” SERIES GEARS, YOU WILL NEED TO KNOW

ORDER “HS” or “HPS” Series gear with Mfg. DO NOT order gear using Raised Casted
Stamped # located in the AREAS where the BOLD Number. Casting # consist of letters “HPS”
ARROWS are pointing. Mfg. stenciled numbers followed by (6) numbers.
consist of “HS” or “HPS” followed by (5) #’s. Refer Refer to illustration below for example.
to illustration for example.
Note: It maybe necessary to wire brush the areas to

locate MFG. Stenciled Number.
ILLUSTRATION (1) Typical 2 port / hose ILLUSTRATION (2) 4 Port Control Valve
gear. One hose top &
One hose bottom.
Typical “HS71” Series Gear Typical “HPS53 / 71” series gear
ILLUSTRATION (3) 4 Port Control Valve ILLUSTRATION (4)

VALVE CAN BE ORDERD SEPARATELY. TO DO
SO, WE WILL NEED MFG. STENCILED NUMBER
LOCATED ON VALVE. LOOK WHERE BOLD
ARROWS ARE POINTING. EXAMPLE: V14022
Typical “HPS72” series gear

28

“HS71”, “HPS53”, “HPS71” & “HPS72” SERIES
HPS53026 HPS71098 HPS71390 HPS71539 HPS71605 HPS72072

HPS53151 HPS71316 HPS71488 HPS71579 HPS72025 HS71005
HPS53157 HPS71336 HPS71489 HPS71584 HPS72030 HS71007
HPS70155 HPS71345
Note: HPS71497
For Numbers HPS71585
not Listed, Please call (281)HPS72032
386-7229
HPS70521 HPS71359 HPS71528 HPS71589 HPS72037
HPS71043 HPS71378 HPS71538 HPS71599 HPS72051
29

“HS71” SERIES - INTERNAL 2 PORT VALVE
TO ORDER A REPAIR / SEAL KIT, We will need the “Mfg. Stamped Number” off of Housing.
NOTE 1: To locate Mfg. Stamped / Stenciled Number, Refer to Page #28 for details.
NOTE 2: If Mfg. Stamped / Stenciled number cannot be found, we will need “Casting Number” along with
“Year, Make and Model” of Truck or Type of Equipment that its on. Then call 281-386-7229 to check
“Price & Availability”.
NOTE 3: Due to the Years these Units were originally manufactured (1960’s to 1970’s). Some parts will
not be available. The most common parts available will be “Bearings, Seals, Gaskets & Bushings”
Typical “HS71” Series Gear Parts Breakdown
30

“HPS52, HPS53, HPS71” SERIES - “EXTERNAL 4 PORT VALVE”
NOTE 2: If Mfg. Stamped / Stenciled number cannot be found, we will need “Casting Number” along with
“Year, Make and Model” of Truck or Type of Equipment that its on. Then call 281-386-7229 to check
“Price & Availability”.
Typical “HPS52”, “HPS53”, “HPS70” & “HPS71” Series Gear Parts Breakdown
31

“HPS72” SERIES - EXTERNAL 4 PORT VALVE
NOTE 2: If Mfg. Stamped / Stenciled number cannot be found, we will need “Casting Number” along
with “Year, Make and Model” of Truck or Type of Equipment that its on. Then call 281-386-7229 to
check “Price & Availability”.
Typical “HPS72” Series Gear Parts Breakdown
32
“ROSS & TRW” MANUAL STEERING GEARS
“378AS, 408AS, 503AS, 504AS” Series
(NOTE: Call for “P&A” , these gears may be “R&R” only!)
TO ORDER Manual Steering Gears, you will need to know the details of either
Illustration #1 OR #’s 2 and 3 together:
1) MFG. Tagged Number located on Metal Tag typically bolted to back or side of gear. Refer to
illustration (#1) below for tag type example.
OR
2 & 3) Year, Make, Model of truck along w/Physical Description of unit as outlined in (A) thru (G):
A - Casting number?: Example: 35JC29, 7DC-132B, 503CC017, (See illustration 2, Letter A)
B - Number of mounting bolts?: Example: 3 or 4 (See illustration 2, Letter B)
C - Input shaft type?: (Refer to Illustration 3 for Input Shaft Types)
D - Input shaft length protruding out of housing?: (See illustration 2, Letter D)
D1 - Input Shaft Diameter? (Note: Measure across end of shaft where yoke connects)
E - Sector shaft type?: (Refer to Illustration 3 for Sector Shaft Types)
F - Sector shaft length protruding out of housing?: (See illustration 2, Letter F)
G - Rotation: CW / CW or CW / CCW? (Note: Rotate input shaft Clockwise (CW) and watch to see which
direction the sector shaft turns, Clockwise (CW) or Counter-Clockwise (CCW)?
ILLUSTRATION (1) - Mfg. Tag Number ILLUSTRATION (2) - Physical Description

G
C A
D1 G
E
Additional Typical Manual Gears

“35JC, 378AS, 408AS, 503AS, 504AS” (F) - Measure
A Part of shaft
protruding out
of housing
B
ILLUSTRATION (3) - Typical “Input / Sector” Shafts
Input spline w/Flat spot
Input splined w/Partial

Clamp Sector
Input smooth w/ Keyway
Nut Sector

Input splined w/360 groove
33
253AS002 378AS004 503AS003 503AS061 503AS132 503AS183
253AS003 378AS005 503AS006 503AS062 503AS134 503AS186
253AS005 378AS006 503AS007 503AS063 503AS135 503AS187
253AS006 378AS007 503AS008 503AS067 503AS136 503AS192
253AS008 378AS009 503AS009 503AS071 503AS137 503AS193
253AS009 378AS015 503AS010 503AS073 503AS140 503AS194
253AS010 378AS019 503AS013 503AS074 503AS142 503AS195
253AS011 378AS020 503AS014 503AS075 503AS143 504AS003

253AS017 378AS021 503AS015 503AS080 503AS144 504AS004
253AS030 378AS022 503AS016 503AS081 503AS145 504AS006
253AS033 378AS023 503AS018 503AS084 503AS147 504AS008
253AS056 378AS026 503AS021 503AS086 503AS148 504AS009
253AS062 378AS029 503AS024 503AS088 503AS150 504AS010

301AS001 378AS030 503AS025 503AS091 503AS151 504AS011
371AS000 378AS033 503AS026 503AS092 503AS152 504AS013
376AS001 378AS037 503AS027 503AS094 503AS153 504AS014
376AS002 378AS048 503AS028 503AS096 503AS154 504AS015
376AS005 408AS006 503AS031 503AS098 503AS155 504AS017

376AS006 408AS007 503AS036 503AS099 503AS156 504AS018
376AS010 408AS008 503AS037 503AS100 503AS157 504AS022
376AS011 408AS011 503AS038 503AS104 503AS159 504AS023
376AS012 408AS013 503AS042 503AS106 503AS160 504AS024
376AS013 408AS014 503AS043 503AS107 503AS161 504AS026

376AS018 408AS017 503AS045 503AS110 503AS163 504AS027
376AS020 408AS018 503AS046 503AS111 503AS164 504AS029
376AS021 408AS020 503AS047 503AS113 503AS171 504AS031
376AS024 408AS021 503AS048 503AS117 503AS172 504AS034
376AS025 408AS022 503AS053 503AS120 503AS176 504AS037
378AS000 4CC07 503AS056 503AS121 503AS177 504AS039
378AS001 4D005 503AS058 503AS124 503AS178
378AS002 503AS000 503AS059 503AS127 503AS179
378AS003 503AS002 503AS060 503AS131 503AS182
34

TO ORDER A REPAIR / SEAL KIT, We will need the “Mfg. Stamped Number” off of Tag.
NOTE 2: If Tag number cannot be found, we will need “Casting Number” along with “Year, Make and
Model” of Truck or Type of Equipment that its on. Then call 281-386-7229 to check “Price & Availability”.
Typical “378AS” , “378CC”, “408AS” & “408CC” Series Parts Breakdown
Typical “503AS”, “503CC, “504AS” & “504CC” Series Parts Breakdown
35
“TA”, “TD”, & “TE” Series
(NOTE: Call for “P&A” , these gears may be “R&R” only!)
TO ORDER “TA”, “TD”, & “TE” SERIES GEARS, YOU WILL NEED TO KNOW

ORDER “TA, TD & TE” series gear with Mfg. DO NOT ORDER GEAR with Housing Casting
Stamped Number located where the BOLD ARROWS Number. Casting Number consist of (2) Letters
are pointing. Mfg. Stamped / Stenciled number (Example: “TA”, “TE” or “TD”) followed by (6)
consist of (2) Letters followed by (5) numbers. Casting Number identifies series only.
numbers. Refer to illustration below for example: Refer to illustration below for example:
Note: It maybe necessary to use a wire brush to

locate stamped / stenciled Number.
Typical “TA, TE & TD” Series Gears

(Shown in illustrations 1 & 2 below)
NOTE: “TA, TE & TD SERIES GEARS MAYBE NOTE: “TA, TE & TD SERIES GEARS MAYBE
“R&R” ONLY. “R&R” ONLY.
“R&R” IS BASED ON CONDITION OF OLD “R&R” IS BASED ON CONDITION OF OLD

UNIT BEING REBUILDABLE AS WELL AS UNIT BEING REBUILDABLE AS WELL AS
PARTS BEING AVAILABLE!! PARTS BEING AVAILABLE!!
36
“TA”, “TD”, “TE” Series
TD52004 TE55026 TE71018
TD62001 TE55035 TE71027
TD62003 TE55044 TE71028
TD62004 TE55045 TE71029
TD62005 TE55046 TE71031
TD62006 TE55047 TE71037
TD68001 TE55048 TE71040
TD68004 TE55049 TE71046
TD68006 TE62011 TE71050
TD68007 TE62021 TE71053
TD68008 TE62034 TE71055
TD68013 TE62041 TE71057
TD68015 TE62055 TE71059
TD71010 TE67002 TE71067
TD71017 TE67003 TE71072
TD71019 TE67015 TE71084
TD71020 TE67044 TE71085
TD71021 TE67071 TE71088
TD71022 TE67130 TE71089
TD71024 TE67131 TE71091
TD71026 TE67139 TE72391
TD71027 TE67146 TE72597
TD71031 TE67163 TE72630
TD71038 TE67166 TE72740
TD71040 TE68026 TE72798
TD71041 TE69004 TE72804
TD71042 TE69026 TE72806
TD71084 TE69038 TE72842
TE55002 TE69057 TE72875
TE55010 TE71004 TE72391
TE55020 TE71014
37

“TA”, “TD”, “TE” Series
TO ORDER A REPAIR KIT, We will need the Mfg. Stamped Number.

(Example: TD62008, TE71038)
Call 281/386-7229 to check “Price & Availability”.
See Page #36 on where to locate Part Number.
Note: Due to the Years these Units were originally manufactured (1950’s to 1970’s).
Some parts will not be available. To check parts for these units. We will need Mfg.
Stamped / Stenciled Number along with the Item Number shown below.
Typical “TA”, “TD” & “TE” Series Gear Parts Breakdown
38
“SAGINAW” STEERING GEARS

“SEMI-INTEGRAL (4 HOSE)” SERIES
TO ORDER Saginaw “Semi-Integral” / “4 Hose” Gear. You will need to know # 1, and if
necessary, #’s 2 & 3 as shown in illustration chart below:
Typical Saginaw Gear
1) Look here for Housing Casting / 2) If needed, look here Housings shown below:
Stamped number. Note 1: See chart for Sector Shaft stamp
below for example Casting #’s. number and if necessary,
Note 2: It maybe necessary to wire Get Sector Shaft type and
brush the area! O.D. as shown in illustration
(A) & (B)
Illustration “A”
3) On gear w/Housing Housing #5690653

#5696067, It maybe nec-
essary to measure port
sizes: 9/16” or 13/16”
LL1
Measure OD Across
Illustration “B”
Housing #7802018
Measure OD Across Housing #5696067 Housing #7832331
1) Housing 2) Sector Shaft Stamped 3) Port Front Axle Weight SRTP #

Casting / Stamped # Number & “Notes” Size Or Number of Cylinders
(Note: See illustration A)

Clamp Sector w/1 3/8” Clamp Sector
Note: See Illus. “A” & = #2615C1
Measure Sector O.D. Or
5690653 1 3/8” or 1 1/2” w/ 1 1/2” Clamp Sector
(Choice of 4 Types) = #2615C2
(Note: See illustration B)
Nut Type w/ 1 3/8” Nut Sector
Note: See Illus. “B” & = #2616T1
Measure sector O.D. Or
1 3/8” or 1 1/2” w/ 1 1/2” Nut Sector
= #2616T2
5696067 LL1 9/16” Up to 12K w/ 1 Cylinder 2620

(Choice of 2 Types)
LL1 13/16” 16K & up w/ 2 Cylinders 2625
7832331 LL 2630
7802018 L2 2645
NOTE: For numbers not listed, please call 281.386.7229 for info.
39

TYPICAL “SEMI-INTEGRAL (4 HOSE)” SERIES
PART TYPE CONTENTS SRTP PART # PART TYPE CONTENTS SRTP PART #
Complete Seal Kit For Item #’s Complete Seal Kit Item #’s
Gears w/Housing #’s 1 thru 14 8301 For Gear w/Housing 1 thru 14 8300
5690653, 5696067 # 7802018
Input Seal Kit Item #’s 1,2 4027IK Valve Assembly Item #’s 5 thru 7842835
&3 8
Sector Shaft Bushing Item #16 Sector Shaft Bushing Item #16
For Gears w/ Casting 5689321 For Gears w/ Casting 268771
#’s 5690653, 5696067 # 7802018
Worm Shaft Item #20 5673271 Worm Shaft Race Item #21 5673272
Bearing
7A
7B
19
7C
21 20
18
NOTE: For Part Numbers or Items not listed,

Please call 281-386-7229 for availability.
40

“DUAL PISTON / 710” SERIES
NON-METRIC / 4 Bolt Mount Housing #7813161 METRIC / 4 Bolt Mount w/ Housing #7813161 -
- Note: See below for SRTP Part # Note: See below for SRTP Part #’s and
Illustration #1 & 2 for additional gear descriptions
“Long” Full Splined Sector (See illustration #2)

SRTP #2600 (CW/CW, 6 turns - Application: Winnebago))
Note: To determine rotation, Turn input CW and watch
to see if sector shaft is turning CW or CCW
Sector Shaft w/ the Sector Shaft w/o the
letters “D9” Stamped letters “D9” stamped SRTP #2604
on end. Commonly on end. Commonly
found on units w/ found on units w/ Clamp type sector (See illustration #1)
Housing #7813161 Housing #7813161 (w/o letters “D9” stamped on end of Sector)
SRTP #2605
“Short” Full Splined sector (See illustration #2)
D9
(CW/CW, 4 1/4” turns from end to end)
to see if sector shaft is turning CW or CCW
SRTP #2606
“Short” Full Splined sector (See illustration #2)
(CW/CCW, 4 3/4 turns from end to end)
Illustration #1
Housing has #D69 or D89 stamped on it.
Full Splined Sector Shaft to see if sector shaft is turning CW or CCW
Note: It may be necessary to measure length of shaft SRTP #2608
protruding out of housing
Clamp type sector (See illustration #1)
Measure (w/ “D9” stamped on end of Sector)
Shaft from
where it SRTP #2609
starts to
Stick out Note: For Gears that do not match any of
of housing the Part Numbers shown above. Call (281)
out to end
386-7229. Please try and provide us with as
much info as possible based off of the
Illustration #2 information provided above.
41

“DUAL PISTON / 710” SERIES
Description: “METRIC” 3 Bolt Mount , Nut Description: 3 Bolt Mount w/ Housing

Type Sector w/ Housing #26002502 #7830389
Note: See below for SRTP Part #’s and Note: See below for SRTP Part #’s and
additional gear descriptions additional gear descriptions
Application: 1990 & UP GMC Topkick Application: INTERNATIONAL S-LINE

Description - 6 turns from lock to lock Description - 1 3/4” Full Splined Sector,
5 1/4” turns from end to end
SRTP #2607
SRTP #2610
Application: Oshkosh Application: Motor Home
Description - Gear uses O-ring Pressure Ports Description - 1 3/4” Full Spline Sector,
4 1/4 turns from end to end
SRTP #2607-O
SRTP #2611
Application: Oshkosh Chassis Application: Motor Home
Description - 4 1/4 turns from lock to lock Description - “Long” Full Spline Sector,
5 1/4” turns from end to end
SRTP #2607-4
SRTP #2612
Nut type Sector Full Splined Sector
On some applications, shaft

length will have to be measured.
42

TYPICAL “DUAL PISTON / 710” SERIES
Part Type Contents SRTP Part # Part Type Contents SRTP Part #
Complete Seal Kit Item #’s Sector Shaft Seal Item #’s 4029SK
All Number 1 thru 19 8092 Kit 8, 9 & 10
Input Seal Kit Item #’s 1, 2, 3 4028IK Valve Assembly Item #20 7842833
NOTE: For Part Numbers or Items not listed, Please call 281-386-7229
43
“SAGINAW” MANUAL STEERING GEARS

APPLICATIONS: MEDIUM & HEAVY DUTY “CHEVROLET”, “GMC” & “IHC. S-LINE”
TO ORDER “Saginaw” Manual gears, you will need to know both (A) Housing stamped number, (B)
Number stamped on end of Sector Shaft and / or (C) Sector shaft type and OD size
(A) Look where ARROW is Pointing for Hous-

ing / Stamped #. Refer to illustration below
for details. Note: It maybe necessary to wire
7 8 28 301
(B) Look were ARROW is pointing for tamped
number On end of shaft. Example: LL, L4
OR
Use the 3 sector shaft Illustrations below to
help identify. See letter “C”.
(C) Sector shaft (OD) outside diameter measures either “1 3/8” or “1 5/8” on all (3) shaft
Nut Type Sector Clamp Type Sector Clamp

“Splined w/ Threads” “Semi Splined” Type Sector
—Measure OD — ——Measure OD —–-

——Measure OD —–-
(A) Housing (B) & (C) Sector SRTP Housing (B) & (C) Sector SRTP
Number Shaft Notes Number Number Shaft Notes Number
5689471 N/A 5689471 5696576 3” OD 5696576A
5690683 1 5/8” OD - Clamp 5690683A 5696576 3 3/4” OD 5696576B
5690683 1 3/8” OD - Clamp 5690683B 7800045 N/A 7800045
5690683 1 3/8” OD Nut 5690683T 7826828 1 5/8” OD 7826828
5690694 1 5/8” OD - Clamp 5690683A 7826859 1 3/8” OD 7826859
5690694 1 3/8” OD - Clamp 5690683B 7828071 N/A 7828071
5690694 1 3/8” OD Nut 5690683T 7828301 N/A 7828301
5690998 1 5/8” OD - Clamp 5690683A 7828423 N/A 7828423
5690998 1 3/8” OD - Clamp 5690683B 7829112 N/A 7829112
5690998 1 3/8” OD - Nut 5690683T 7830802 “LL2” stamped 7830802A
5696076 “L4” stamped 5696076 7830802 “LL5” stamped 7830802B
44
“SAGINAW” MANUAL “525” SERIES STEERING GEARS
APPLICATIONS: PICK-UP TRUCKS, FORKLIFTS and ETC.
TO ORDER, We will need to know:

#1 - Year, Make & Model of Unit Application
#2 - Unit Casting or Mfg. Stamped / Stenciled Number located on Back Side (See illustration 1)
or Tagged Number if affixed to unit. See illustration Number (2) and look where BOLD ARROW
is pointing.
#3 - Various particulars of unit such as:
A) Gear Rotation (Clockwise / Clockwise) or (Clockwise / Counter-Clockwise) Note: See
Illustration below for details.
B) Input Shaft Type and OD - Note: See Input Shaft illustration below for details.
C) Input Shaft Length - Note: See Input Shaft Illustration below for details .
D) Sector Shaft Types (Clamp) or (Nut Type) - Note: See Sector Shaft illustration below for details
E) Number of turns from End to End (Example: 3 turns, 3.5 turns & Etc.)
F) Number of Mounting Bolts (Example: 3 - 4 bolt Mt.)
BACK VIEW “Typical” Saginaw Manual Gears FRONT VIEW

ILLUSTRATION (2)
3B
3C 3D
3F
3B) Input Shaft Types & OD 3D) Sector Shaft Types 3A) Gear Rotation
3C) Input Shaft Length
45
SAGINAW MANUAL STEERING GEARS

“525” SERIES
“SEAL KITS & MISC. PARTS”
APPLICATIONS: PICK-UP TRUCKS, FORKLIFTS, AIRPORT TUGS and ETC.
Typical Saginaw “Manual” Series Parts Breakdown. For a particular part needed,
We will need to know the following:
#1 - Either the Housing Casting Number or Mfg. Stamped / Stenciled Number
#2 - Item description below
#3 - Year, Make & Model of Application
#4 - Possibly some Measurements (Note: We will let you if measurements are
needed when you call!!
Call 281-386-7229 to check “Price & Availability”.
Note: Due to the Years these Units were originally manufactured
(1960’s to 1980’s). Certain parts will not be available. The most common parts available will be
“Bearings, Seals, Gaskets & Bushings”.
Typical “525’ Series Gear Parts Breakdown
46
“SHEPPARD” STEERING GEARS

“292, 372, 382, 39, 392, 491, 492, 59, 592” SERIES
TO ORDER Sheppard steering gears. You will need to know both:
(A) Casting Number and (B) Mfg. Stamped Number.
(A) “CASTING NUMBER”

(1A)
Look where BOLD ARROW is pointing for casting
number. Refer to illustration (1) below and (1A) on
right side of page for example: 292, 292S-5, 292S-
6, 392, 392S-6, 492, 592 & etc.
ILLUSTRATION (1)
(B) “MFG. STAMPEDD NUMBER”

Look where BOLD ARROWS are pointing for Mfg. (2B)
Stamped number located either on Front Side or
Back Side of Housing.
FOR FRONT SIDE, See illustration (2) Below and Typical “292, 392, 492, 592” Series
(2B) on Right Hand Side of Page.
FOR BACK SIDE, See illustration (2A) Below and
Typical “Inside” frame mount gear
(2B) on Right Hand side of Page. Note: Gears that
mount Inside of the frame or thru frame will have
their Mfg. Stamped Number located on the back
side. These type of gears (See illustration 3)
Commonly found on Mack, Marmon, Fire Trucks
& Etc. See illustration (2A) below for Part Number ILLUSTRATION (3)
location.
ILLUSTRATION (2)
Typical “Slave / Assist” Gear
ILLUSTRATION (2A) ILLUSTRATION (4)
Typical “90 degree Mitre” gear
ILLUSTRATION (5)
47

“292, 372, 382, 39, 392, 491, 492, 59, 592” SERIES
292ABL1 292EL1 292SCC6 292SR2 392BSL1
292ABL4 292EL4 292SCD5 292SWZ5 392BSL2

292AFL1 292ER1 292SCD6 292SWZ6 392BSL3
292AFL4 292ER2 292SCE61 292SYZ4 392BSL4

292AHL1 292K1 292SCX6 292TL4 392BXR5
292AHL4 292K4 292SCX61 292V4 392BYL5
292AJL1 292LR1 292SCY5 372A1 392CG3
292AJL2 292LR2 292SCY6 372A2 392CG5
292AJL4 292RR1 292SDH6 372C3 392ELR3

292AR1 292RR2 292SDJ6 372JL3 392EQL5
292AR2 292SA1 292SDK6 372LL3 392EQLZ5

292AR3 292SAL5 292SDL6 382A2 392EWR3RG
292AR4 292SAL6 292SDT6 392A1 392F5
292AWR2 292SB1 292SDV6 392A4 392SAL4
292BAR1 292SBE5 292SDW6 392AS4 392SAO3
292BAR2 292SBF5 292SDX6 392AXZ4 392SAO4
292BAR3 292SBF6 292SDY6 392BAL1 392SAP6

292BAR4 292SBH5 292SDZ6 392BAL2 392SAR3
292BLL1 292SBH6 292SEA6 392BAL3 392SAS3
292BLL2 292SBH61 292SEB6 392BAL4 392SAS4
292BLL3 292SBJ5 292SEC6 392BAR 392SAZ3

292BLL4 292SBP5 292SED6 392BAR1 392SBE3
292BOL1 292SBP6 292SEE6 392BAR2 392SBG3
292BOL4 292SBV5 292SEP6 392BAR3 392SBO4
292BYL1 292SBX5 292SEQ6 392BD5 392SBV4

292BYL2 292SBX6 292SEX6 392BER3 392SBX4
292BYL3 292SBY6 292SEX61 392BFR3 392SBX6

292BYL4 292SCA5 292SEZ6 392BQL5 392SCB4
292CAL1 292SCA6 292SEZ62 392BR1 392SCH4
292CAL4 292SCB5 292SL1 392BR2 392SCT3
292CBL1 292SCB6 292SL4 392BR3 392SCU4

292CBL4 292SCC5 292SP6 392BR5 392SCW4
NOTE: FOR ADDITIONAL PART NUMBERS, SEE NEXT PAGE.
48

“292, 372, 382, 39, 392, 491, 492, 59, 592” SERIES
392SDX6 392SJK6 492BNZ4 492SFT5 592SAH5
392SEC4 392SJL5 492BO4 492SFV 592SAH6
392SEU4 392SJM6 492BQ4 492SFV5A1 592SAH61
392SEU6 392SJN6 492CD4 492SFX5 592SAM5
392SFP4 392SJP6 492CZ3 492SG3 592SAT5
392SFR5 392SJR6 492SAF5 492SGD5 592SB5
392SFS6 392SJT6 492SAG5 492SGP5 592SBC5
392SFU4 392SJV6 492SAQ4 492SGQ5 592SBC51
392SFV4 392SO3 492SAW3 492SGR5 592SBD5
392SFW4 392SU4 492SAX4 492SGR5A1 592SBD51
392SFY6 392SV4 492SBE4 492SGV5 592SBH5
392SFZ6 392SX3 492SBE4A 492SGW5 592SBY5
392SGA6 392UZ5 492SBG4 492SHM5 592SCA5
392SGF6 392ZZ4 492SBO4 492SHV5 592SCB5
392SGK4 39AA1 492SBR4 492SK3 592SCE5
392SGL6 39BDL4 492SBX4 492SL3 592SCF5
392SGM6 39BDR4 492SC3 492SXZ3 592SCG5
392SGO6 39R4 492SC5 592AH4 592SCH5
392SGR4 491AE 492SCJ5 592ARZ4 592SCP5
392SGS4 491AE1 492SCK5 592ATZ4 592SCS5
392SGW6 491BA 492SCQ4 592BDL4 592SCT5
392SHA4 491BA1 492SCZ4 592BDR2 592SD5
392SHC6 491BW 492SDD4 592BXL4 592SDB5
392SHH6 491BW1 492SDE4 592BXR2 592ST5
392SHM6 491CC 492SDM5 592CD4 592SU5
392SHU4 491CC1 492SDO4 592CHL4 592SV5
392SHW6 491CC2 492SDOZ5 592CL4 592SWZ5
392SHY6 492AL4 492SEE5A2 592D1 592U1
392SJC6 492AR3 492SFH5 592D4 592U3
392SJD6 492ASZ4 492SFL5 592DGZ4 592Z1
392SJF4 492AY3 492SFN5 592EB4 592Z4
392SJG6 492BC4 492SFO5 592ED4 59AR1
392SJJ6 492BH3 492SFP5 592EL4RG 59AR3
392SJJ61 492BN4 492SFS5 592SA5 59AW4
49

TYPICAL “292, 372, 382, 39, 392, 491, 492, 59, 592” SERIES
292 Seal Kit Item #’s 1 thru 17 8302 292 Bushing / Bearing Item #33 - (2) Req. 2071841A
Input Seal Kit - All Item #’s 1, 2 & 9 2351251K 292 Sector Shaft Item #34 Call for #
292 Reversing Spring Item #20 0751831 392 Sector Shaft Item #34 Call for #
392 Reversing Spring Item #20 0751681 492 Sector Shaft Item #34 Call for #
592 Sector Shaft Item #34 Call for #
TO ORDER “SEAL KITS and / or

PARTS”, You will need to determine
off of your old Steering gear the
following:
(A) Casting Number

and
(B) Mfg. Stenciled Number .
See illustrations below for example:
(A) Casting Number
(B) Mfg. Stamped / Stenciled Number
NOTE: For Parts not listed,

Please call (281) 382-7229.

Please call (281) 386-7229.
50

TYPICAL “292S-6 & 392S-6” SERIES
PART TYPE CONTENTS SRTP PART # PART TYPE CONTENTS SRTP PART #
292S-6 Seal Kit Item #’s 1 thru 22 8818 392S-6 Seal Kit Item #’s 1 thru 22 8822
Input Seal Kit Item #’s 1, 2 & 6 2351251K 392S-6 Sector Shaft Item #23 Call for Part #
292S-6 & 392S-6
292S-6 Sector Shaft Item #23 Call for Part #
NOTE: For Parts not listed, Please call (281) 386-7229

TO ORDER “SEAL KITS and / or
PARTS”, You will need to determine
off of your old Steering gear the
following:
(A) Casting Number

and
(B) Mfg. Stenciled Number .
See illustrations below for example:
(A) Casting Number
(B) Mfg. Stamped / Stenciled Number

Please call (281) 386-7229.
51

“M80, M83, MD83, M90, HD94, M100, M110” SERIES
TO ORDER Sheppard “M” series gears. You will need to know both:
(A) Casting number and (B) Mfg. Stamped / Stenciled number
(A) “CASTING NUMBER”
Look where BOLD ARROW is
pointing for casting number. Refer
to illustration example below: B B
ILLUSTRATION (1)
(B)“MFG. STAMPED A
NUMBER”
Look where BOLD ARROWS are
pointing for Mfg. stamped number
located on the machine smooth
surface area of case. Pitman arm may
have to either be rotated or removed
to locate it. Refer to
illustration example below:
SEE PAGE #53 FOR COMMON

Note: It may also be necessary to
“Wire Brush” area to locate number. SHEPPARD PART NUMBERS
ILLUSTRATION (2) TYPICAL SHEPPARD ILLUSTRATION (5)

“M80, M83, MD38, M90,
HD94, M100, M110”
Series Gears
(ILLUSTRATION 1 thru 6)
Sheppard gears
ILLUSTRATION (4)
52

“M80, M83, MD83, M90, HD94, M100, M110” SERIES
M100PAE1 M100PDL1 M100PHU1 M100PMW3 M110PGQ1
M100PAE11 M100PDQ1 M100PJB1 M100PMX1 M110PGX1
M100PAE12 M100PDQ3 M100PJB3 M100PMX3 M110PHC1
M100PAG1 M100PDU1 M100PJC1 M100PNB1 M110PHM1
M100PAH1 M100PDZ1 M100PJC3 M100PNJ1 M110PHN1
M100PAL1 M100PEN1 M100PJD1 M100PNJ3 M110PKP
M100PAM1 M100PET1 M100PJD3 M100PPG3 M110PKP1
M100PAR1 M100PEV1 M100PJG1 M100PPG31 M110SAB2
M100PBF1 M100PEV3 M100PJG3 M100PQF1 M110SAP1
M100PBJ1 M100PEW1 M100PJH1 M100PQF3 M80PAK1
M100PBM1 M100PEZ1 M100PJH3 M100PQH1 M80PAT1
M100PBQ1 M100PFA1 M100PJJ1 M100PQH3 M80PAW1
M100PBQ3 M100PFF1 M100PJJ3 M100PQQ1 M80PBF1
M100PBW1 M100PFS1 M100PKC1 M100PQQ3 M80PBF3
M100PBY1 M100PFS11 M100PKE1 M100PQT3 M80PBG1
M100PBZ1 M100PFX1 M100PKG1 M100PQT31 M80SAA1
M100PCA1 M100PGC1 M100PKP1 M100PQW3 M80SAD1
M100PCL1 M100PGC3 M100PLD1 M100PQW31 M80SAE1
M100PCM1 M100PGE1 M100PLE1 M100PTS3 M80SAT1
M100PCN1 M100PGE3 M100PLE3 M110P1 M80SAW1
M100PCP1 M100PGF1 M100PLG1 M110PAJ1 M90PAD1
M100PCR1 M100PGF3 M100PLG3 M110PAJ21 M90PAE1
M100PCT1 M100PGG1 M100PLJ1 M110PAJ22 M90PAG1
M100PCX1 M100PGG3 M100PLJ3 M110PBJ1 M90PAS1
M100PCX3 M100PGH1 M100PLS1 M110PBQ1 M90SAK1
M100PDA1 M100PGH3 M100PLS3 M110PBQ11 M90SAK3
M100PDE1 M100PGK1 M100PLX1 M110PBQ12 SD110PD3
M100PDE3 M100PGK3 M100PLX3 M110PCL SD110PD32
M100PDH1 M100PGW1 M100PMN3 M110PCL1 SD110PD34
M100PDJ1 M100PHD1 M100PMN31 M110PCL12
M100PDJ3 M100PHD3 M100PMT1 M110PCS1
M100PDK1 M100PHE1 M100PMT3 M110PFA1
M100PDK3 M100PHE3 M100PMW1 M110PFW1
53

Typical “M80, M83, MD83, M90, HD94, M100, M110” SERIES
“SEAL KITS PARTS BREAKDOWN”
TO ORDER “SEAL KITS and / or PARTS”, You will need to know the following
Information off of your old gear: Casting Number, See illustration (1) Below
and Mfg. Stamped Number, See illustration (2) below.
CASTING NUMBER MFG. STAMPED NUMBER
ILLUSTRATION (3) TYPICAL GEAR PARTS BREAKDOWN

(For all M80 thru M110 Series Gears)
SEE PAGE #’s 56-61 FOR COMPLETE

DETAILS ON “SEAL KITS” AVAILABLE
54

“SEAL KIT LISTING”
TYPICAL “M80” SERIES
GEAR MODEL PART or SEAL KIT SHEPPARD SRTP
(All “M” Series) TYPE PART NUMBER PART NUMBER
All “M”, “MD” & “HD” Input Shaft Seal Kit 5544861 8837
Models
All “M” Series built from Input Shaft Seal Kit 5542261 8837
June 1991 to Present
All “M” Series built prior Input Shaft Seal Kit 5541351B 8834
to June 1991

“M80” TYPE PART NUMBER PART NUMBER
“M80” Master & Slave - Sector Shaft Seal Kit 5544891 5544891
All Models
“M80” Master & Slave - End Cap Seal Kit 5544901 5544901
All Models
“M80” Master - Complete Seal Kit 5543461 8825

All Models
“M80” Master - Complete Seal Kit - 5545201 8825

All Models Includes Kit #’s 5544861,
5544891, 5544901
“M80” Slave - All Models Complete Seal Kit 5544931 8884
“M80SAA / SAT” Slave Sector Shaft - Only **For Part #, Call **For Part #, Call
281-386-7229 281-386-7229
For parts not listed, Please call 281.386.7229 for Price & Availability.
55

TYPICAL “M83” & “MD83” SERIES
Models

“M83” TYPE PART NUMBER PART NUMBER
“M83” - All Models Input Seal Kit 5542221 5542221
“M83” - All Models Sector Shaft Seal Kit 5542231 5542231
“M83” - All Models Cylinder Head O-ring Kit 5542241 5542241
“MD83” - All Models Sector Shaft Seal Kit 5545291 5545291
“MD83” - All Models Sector Shaft Seal Kit w/ 5545391 5545391

Sector Cover Snap Ring
“”MD83” - All Models End Cap Seal Kit 5545311 5545311
“MD83” - All Models Complete Seal Kit 5545331 5545311
56

Models
All “M” Series built from Input Shaft Seal Kit 5542261 8837
June 1991 to Present
All “M” Series built prior Input Shaft Seal Kit 5541351B 8834
to June 1991
GEAR MODEL PART or SEAL SHEPPARD SRTP

“M90” KIT TYPE PART NUM. PART NUM.
“M90” - Master & Slave - All Sector Shaft Seal Kit 5544881 5544881
Models
“M90” - Master & Slave - All Sector Shaft Seal Kit w/ 5545381 5545381
Models Sector Cover Snap Ring
“M90” Master - All Models End Cap Seal Kit 5544911 5544911
“M90” Master - All Models Complete Seal Kit 5543551 8824
“M90” Master - All Models Complete Seal Kit - In- 5545211 8824
cludes Kit #5544861,
5544881, #5544911
“M90” Slave - All Models Complete Seal kit 5544941 8885
57

TYPICAL “HD94” SERIES
TYPE PART NUMBER PART NUMBER
Models

“HD94” TYPE PART NUMBER PART NUMBER
“HD94” Master & Slave - All Sector Shaft Seal Kit 5545301 5545301
Models
“HD94” Master & Slave - All Sector Shaft Seal Kit w/ 5545401 5545401
Models Sector Cover Snap Ring
“HD94” Master - All Models End Cap Seal Kit 5545321 5545321
“HD94” Master - All Models Complete Seal Kit 5545341 5545341
“HD94” Slave - All Models Complete Seal Kit 5545351 5545351
“HD94” Slave - All Models Complete Seal Kit w/ 5545411 5545411

58

(All “M” Series) KIT TYPE PART # PART #
All “M”, “MD” & “HD” Models Input Shaft Seal Kit 5544861 8837
All “M” Series built from June 1991 to Input Shaft Seal Kit 5542261 8837
Present
All “M” Series built prior to June 1991 Input Shaft Seal Kit 5541351B 8834

“M100” KIT TYPE PART # PART #
“M100” Master & Slave Sector Shaft Seal Kit 5544881 5544881
“M100” Master & Slave Sector Shaft Seal Kit w/ 5545381 5545381
“M100” Sector Shaft Seals for All “M100” gears w/ a Pressed- 5542271 5542271
in excluder seal at the sector shaft w/ Bolt on case
“M100” Sector Shaft Seals for All “M100” gears w/ a Push-on 5543601 5543601
dust boot at the Sector Shaft and a Snap Ring Cover
“M100” Sector Shaft Seals for All “M100” gears w/ a Pressed- 5543591 5543591
in excluder seal at the Sector Shaft and a Snap Ring
Cover
“M100” Master - All Models End Cap Seal Kit 5544981 5544981
“M100” Master Complete Seal Kit w/ Push-on dust boot for 5543211 8823
Sector shaft
“M100” Master Complete Seal Kit w/ Pressed-in excluder seal 5542331 8823
on Sector shaft
“M100” Master Complete Seal Kit w/ Snap Ring Cover and 5543481 8823
Push-on dust boot at the Sector Shaft
“M100” Master Complete Seal Kit w/ a Snap ring cover and 5543491 8823
Pressed-in excluder seal on Sector Shaft
“M100” Master - Complete Seal Kit - 5545221 8823

All Models Includes Kit #’s 5544861, 5544881, 5544981
“M100” Slave Complete Seal Kit 5544951 5544951
“M100” Slave Complete Seal Kit w/ Sector Cover Snap Ring 5545421 5545421
59

(All “M” Series) KIT TYPE PART # PART #
Models

“M110” KIT TYPE PART # PART #
“M110” - All Models Sector Shaft Seal Kit 5544871 5544871
“M110” Master - End Cap Seal Kit 5544921 5544921

All Models
“M110” Master - Complete Seal Kit 5545231 4049

All Models
“M110P2” Series Complete Seal Kit 5541411 5541411
“M110P1” Series Compete Seal Kit 5542621 5542621
“M110” Slave - Complete Seal Kit 5544961 5544961

All Models
60
“ZF LENKSYSTEME” STEERING GEARS
TO ORDER ZF Lenksysteme Gears, you will need to locate Mfg. Stamped / Stenciled
Number found on aluminum / metal tag (See Illustration below). Look for Aluminum
Tag where the BOLD ARROW is pointing.
ILLUSTRATION (1)
ZF Tag # Example
Typical “ZF LENKSYSTEME” Gears

(Shown in illustration 1 thru 3)
Application: “C” Series Application: GMC Topkick
COMMON ZF TAG / PART SRTP PART

APPLICATIONS NUMBER NUMBER
GMC “C” Series 8014955106 8014955106

GMC “Topkick” 8014955107 8014955107
Peterbilt “210” Series 8058955910 8058955910
NOTE: SEE NEXT PAGE FOR ADDITIONAL PART NUMBERS OFFERED BY SRTP, INC.
61
COMMON PART NUMBERS
COMMON PART NUMBERS FOR MEDIUM DUTY TRUCKS

OEM NUMBER SRTP, INC OEM NUMBER SRTP, INC
NUMBER NUMBER
GM #15002471 8016974101 GM#15143288 8018974102
GM #15002485 8018974101 GM#15178829 8016974101
GM #15095574 8018974102 GM#15178830 8018974101
GM #15143281 8016955108 GM #15178833 8016974101
GM #15143282 8018955105 GM #15178834 8018955101
GM #15143284 8016955108 GM# 20575449 8016955105
GM #15143287 8016974103 GM #20800290 8016955105
COMMON PART NUMBERS FOR BUS APPLICATIONS

OEM NUMBER SRTP, INC OEM NUMBER SRTP, INC
NUMBER NUMBER
Iveco #93166616 8098955175 Magna Steyr #281462006255 8098955228
Inveco #816692 8098955180 Magna Steyr #81.46200-6263 8098955268
Iveco #8161688 8098955183 Magna Steyr #81.46200-6293 8098955307
Leyland #LAK 5112 8098955108 Neoplan #JY1201009 8098955263
Leyland #ACHD470 8098955113 Neoplan #OJ1201009 8098955433
Leyland #HDK4526 8098955115 Neoplan #NM1201009 8098955446
Leyland #TAK 6131 8098955121 Van Doorne #029437R 8098955102
Leyland #ACU 9398 8098955134 Van Doorne #0294376R 8098955104
Magna Steyr #281462006181 8098955105 Van Doorne #1226878R 8098955165
Magna Steyr #81.4620-6196 8098955106 Van Doorne #1226879 8098955166
Magna Steyr #500.00.47.0007 8098955146 Van Doorne #1226882R 8098955167
Magna Steyr #281462006247 8098955197 Van Doorne #1228399 8098955169
Magna Steyr #281462006252 8098955220 Van Doorne #1228400 8098955170
62

“SEAL KITS”
SERIES “8014, 8016, 8090, 8095, 8097 & 8098”
PART TYPE GEAR SERIES SRTP PART NOTES

w/ Tag Number NUMBER
Gear Seal Kit 8014****** Series ZF-PSA8014SK Call (281) 386-7229 for “P&A”
Input Seal Kit 8014****** Series ZF-PSA671108SK Call (281) 386-7229 for “P&A”
Input Seal Kit 8016****** Series ZF-PSA671101SK Call (281) 386-7229 for “P&A”
To Order Seal Kit, We will need Mfg. Stamped / Stenciled Number off of Metal Tag affixed to
gear. See illustration (1) below for details. Call 281-386-7229 to check “Price & Availability” of
Seal Kit.
ILLUSTRATION (1)
Typical “ZF” Gear Parts Breakdown
63

Gear Catalogo

Uploaded by

Copyright:

Available Formats

Gear Catalogo

Uploaded by

Document Information

Original Description:

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Gear Catalogo

Uploaded by

Copyright:

Available Formats

STEERING REBUILDERS & TRUCK PARTS, INC.

764 CR 383 - CLEVELAND, TEXAS 77327

“POWER & MANUAL”

“BENDIX” STEERING GEARS

Typical “C300N” & “C500N” w/ Clamp Sector

Illustration #1 Illustration #2 Illustration #3

ORDER “BENDIX” gear with raised

Typical “C500” w/ Nut Sector. Commonly

ORDER “BENDIX C500” gear with:

“BENDIX” STEERING GEARS

OEM and / or SRTP Part NOTES

“ISUZU” STEERING GEARS

“MFG. TAG NUMBER” “CASTING NUMBER”

Note: It maybe necessary to wire brush the areas!

TYPICAL “ISUZU” NPR GEAR

“ISUZU” STEERING GEARS

Typical “NPR” Series Gear Parts Breakdown

“ROSS & TRW” STEERING GEARS

TO ORDER “ASSIST / SLAVE” GEARS, YOU WILL NEED TO KNOW

“MFG. STAMPED NUMBER” “CASTING NUMBER”

Note: It maybe necessary to wire brush the areas!

Typical “RC64” Series Typical “RCB” Series

ILLUSTRATION (1) ILLUSTRATION (2)

Typical “RCS” Series Typical “RCS” Series

ILLUSTRATION (3) ILLUSTRATION (4)

“ROSS & TRW” STEERING GEARS

“MFG. STAMPED NUMBER” “CASTING NUMBER”

Note: It maybe necessary to wire brush the areas!

Common “HF54” ILLUSTRATION (1)

Nut Type Mfg.’s number maybe

Other common “HF54” Series Gears

ILLUSTRATION (2) ILLUSTRATION (3)

“ROSS & TRW” STEERING GEARS

Note: For Numbers not Listed, Please call (281) 386-7229

“ROSS & TRW” STEERING GEARS

Typical “HF54” Series Gear Parts Breakdown

“ROSS & TRW” STEERING GEARS

“MFG. STAMPED NUMBER” “CASTING NUMBER”

Note: It maybe necessary to wire brush the areas!

Mfg.’s Stamped number maybe

ILLUSTRATION (3) Other common “HF64” ILLUSTRATION (5)

ILLUSTRATION (4) ILLUSTRATION (6)

“ROSS & TRW” STEERING GEARS

“ROSS & TRW” STEERING GEARS

PART TYPE CONTENTS SRTP # PART TYPE CONTENTS SRTP #

Typical “HF64” Series Gear Parts Breakdown

“ROSS & TRW” STEERING GEARS

“MFG. STAMPED NUMBER” “CASTING NUMBER”

Note: It maybe necessary to wire brush the areas!

Typical “HFB52” series gears HFB52023

Note: For Numbers not Listed,

ILLUSTRATION (2) ILLUSTRATION (3)

“ROSS & TRW” STEERING GEARS

PART TYPE CONTENTS SRTP # PART TYPE CONTENTS SRTP #

Typical “HFB52” Series Gear Parts Breakdown

“ROSS & TRW” STEERING GEARS

“MFG. STAMPED NUMBER” “CASTING NUMBER”

Note: It maybe necessary to wire brush the areas!

ILLUSTRATION (4) ILLUSTRATION (5)