PMB 1081 - SPI2 2018A Release
PMB 1081 - SPI2 2018A Release
PMB 1081 - SPI2 2018A Release
General Information
An update to SPI2 is now available. This document describes how to access and install this update, SPI²
2018A.
IMPORTANT: Copies of SPI² issue 2018A are not sent out on USB to currently active SPI² license
users. Please refer to How to Order TIPSS Software below if you require a new copy via USB.
SPI² 2018A must be installed to enable users to download all future updates. This is a requirement to
keep the software current and up to date with the latest Perkins information.
Notes
Refer to System and Software Bulletin PMB 995 for online licensing information
You must have administrator rights to install SPI2 software
You will temporarily need approximately 23GB of free storage space on your hard drive for the
download process. Once SPI² is installed, the install files & downloaded zip file can be removed
releasing 15GB
Screenshots shown are utilising the Windows default zip tool on Windows 7. The screens on your
computer may differ from these
You will need to contact your online licensing administrator if installing SPI2 for the first time. If
you do not know who this is contact [email protected] for advice
Page 1 of 12
All information in this document is substantially correct at time of printing and may be altered subsequently
Produced in England ©Perkins Engines Company Limited 2018
Discretion is recommended when distributing
Systems and Software Bulletin
To activate your SPI2 license you must be connected to the internet while SPI2 is open. If you are
not online you must follow the ‘Manual Activation SPI2 2018A’ instructions
Product and software updates released for 2018 cannot be downloaded using previous versions
such as 2015A or 2016. SPI2 2018A must be installed to pick up all future updates
https://customer.perkins.com/en/product-support/tipss/spi2/spi-download.html
1. Read the following instructions, then click the ‘Download SPI2 2018A’ button on the webpage.
3. At the bottom of the Internet Explorer page, you will see the following bar. For further information
on download speeds, click ‘View downloads’ and refer to the guidelines and timings below.
Page 2 of 12
All information in this document is substantially correct at time of printing and may be altered subsequently
Produced in England ©Perkins Engines Company Limited 2018
Discretion is recommended when distributing
Systems and Software Bulletin
4. If you chose ‘Save’, the zip file will be found in your ‘Download’ folder (pictured below), or if you
chose ‘Save as’, it will be saved where you specified.
SPI2 is a large file and download duration will depend on your internet connection. See the guidelines
below:
Guidelines for approximate download timings for SPI2 2018A (File size 5.7GB)
NOTE:
Mbps – Megabits per second. Used for advertised line speed from ISP.
KBps – Kilobytes per second. Actual download speed registered on computers.
MBps – Megabytes per second. Actual download speed registered on computers.
Page 3 of 12
All information in this document is substantially correct at time of printing and may be altered subsequently
Produced in England ©Perkins Engines Company Limited 2018
Discretion is recommended when distributing
Systems and Software Bulletin
2. Open the SPI2_2018A folder (Fig 1) and double-click / run the install(.bat) file (Fig 2)
Fig 1 Fig 2
Page 4 of 12
All information in this document is substantially correct at time of printing and may be altered subsequently
Produced in England ©Perkins Engines Company Limited 2018
Discretion is recommended when distributing
Systems and Software Bulletin
Insert the new Perkins SPI² issue 2018A USB pen drive into your USB socket and left click ‘Start’
1. Select ‘Computer’
2. Select your USB drive
3. Locate and double-click the ‘install’(.bat) icon
NOTE: SPI2 will install directly on to your C:\ drive and creates a folder called ‘Perkins_SPI2’
5. Once installation is complete, launch the program. The system will prompt you to license the
program. Select ‘Yes’.
NOTE: If the program does not launch automatically after install, then double-click on the SPI2
desktop icon.
Select ‘Yes’ and refer to ‘How to License SPI2 2018A’ within this document.
Note: To activate your SPI2 license you must be connected online while SPI2 is open. If you are not
online you must follow the ‘Manual Activation SPI2 2018A’ instructions.
Page 5 of 12
All information in this document is substantially correct at time of printing and may be altered subsequently
Produced in England ©Perkins Engines Company Limited 2018
Discretion is recommended when distributing
Systems and Software Bulletin
License screen 3
Select ‘Online’ (License screen 1)
Select ‘Activate’ (License screen 2)
Enter the activation ID, user name and PC serial number, if known. If the PC serial number is not
known enter user name again then select ‘Activate’ (License screen 3)
SPI2 is now licensed and will show license details, including a new serial number, activation ID and
expiry date.
The above message will appear when successfully activated. Select ‘OK’.
Page 6 of 12
All information in this document is substantially correct at time of printing and may be altered subsequently
Produced in England ©Perkins Engines Company Limited 2018
Discretion is recommended when distributing
Systems and Software Bulletin
From the SPI2 license screen, select ‘Manual’ (License Screen 1) then select ‘Next’.
Enter the activation ID, adding your ‘user name’ and ‘PC serial number’ (If known), enter user name
again if not known.
Page 7 of 12
All information in this document is substantially correct at time of printing and may be altered subsequently
Produced in England ©Perkins Engines Company Limited 2018
Discretion is recommended when distributing
Systems and Software Bulletin
Select ‘Save request’ and save the request.xml file onto your desktop. Send this file to your online
licensing administrator.
Your administrator will send you back the ‘response.xml’ file. Save this file to your desktop.
Select ‘Load and activate’ then locate the ‘response.xml’ file from your desktop, then select ‘Open’
Page 8 of 12
All information in this document is substantially correct at time of printing and may be altered subsequently
Produced in England ©Perkins Engines Company Limited 2018
Discretion is recommended when distributing
Systems and Software Bulletin
During the final 60 days of a license, SPI2 will launch a countdown warning screen which will advise you
that your SPI2 license can be renewed (if required).
Right-click anywhere in the license information screen and select ‘copy’. Paste the license details into an
email and send to your online licensing administrator requesting a license renewal.
Once renewed by your administrator, the next time you launch SPI2 while connected online. SPI2 will
automatically pick up the renewal and extend your license by 365 days plus the remaining days of your
license.
Page 9 of 12
All information in this document is substantially correct at time of printing and may be altered subsequently
Produced in England ©Perkins Engines Company Limited 2018
Discretion is recommended when distributing
Systems and Software Bulletin
Launch and enter the SPI2 catalogue, select ‘Help’, then ‘Licensing’
Hover your mouse over the license information, right-click and copy then paste the details into a
reference document. Take note of the activation ID.
Page 10 of 12
All information in this document is substantially correct at time of printing and may be altered subsequently
Produced in England ©Perkins Engines Company Limited 2018
Discretion is recommended when distributing
Systems and Software Bulletin
At the bottom of this screen, it will show the below on-screen prompt.
License Screen 1
License Screen 2
Once the license has been deactivated from the old computer, enter the same activation ID (as noted
above) for the new install.
This will transfer the original license period from the old computer to the new one.
Page 11 of 12
All information in this document is substantially correct at time of printing and may be altered subsequently
Produced in England ©Perkins Engines Company Limited 2018
Discretion is recommended when distributing
Systems and Software Bulletin
Following the release of version 2018A, updates will only be sent to this version. All earlier versions of
SPI2 should be considered out of date and their use discontinued. Updates are accessed only by
licenced users with a CWS ID. If you do not have a current CWS ID this must be obtained before a
license is granted. Dealers may obtain their own CWS ID via their distributor. The process for this is
provided in PMB726 – SPI² Policy.
Although there is no charge for individual USB pen drives, please keep your order to the minimum
required to cover your network installation.
The Perkins branded USB pen drives allow you to install SPI2 2018A software on multiple computers.
Literature
Description Package
Number
Dealers will be required to order copies through their distributor. Any distributor who does not have
access to Perkins Secured Site must contact their Perkins Business Manager to assist with the order.
Abbreviations
TIPSS - The Integrated Product Support Solution
SPI2 - Service and Parts Information 2
CWS – Corporate Web Security
Page 12 of 12
All information in this document is substantially correct at time of printing and may be altered subsequently
Produced in England ©Perkins Engines Company Limited 2018
Discretion is recommended when distributing