Hke - 501 453 Univ (Upd260318)

501/453/UNIV
Group II Cable Glands

Flameproof, Increased Safety, Dust Protection
n& 'T' 'G'
Restricted Breathing
'C'
Class - Zones - Divisions
Certified ATEX / IECEx / c CSA us
Application
ø 'B'
 Outdoor or indoor use.
'A'
'F'
 For use with single wire armour ‘W’, wire braid ‘X’, steel
tape armour ‘Z’, elastomer and plastic insulated cables.
 For particular use with Cables that exhibit ‘Cold Flow’
characteristics.
 See technical section for installation rules and regulations.
s.
CABLE GLAND SELECTION TABLE

Entry Thread Size ‘F’ Cable Acceptance Details Hexagon Dimensions
Size Ref. NPT * Inner Sheath ‘A’ Outer Sheath ‘B’ Armour / Braid ‘C’ 'G' Across Across
Metric Standard or
Min. Max. Min. Max. Orientation 1 Orientation 2 Flats Corners
Option
Os M20² ½" 3.5 8.1 5.5 12.0 0.8 / 1.25 0.0 / 0.8 61.6 24.0 26.5
O M20² ½" 6.5 11.4 9.5 16.0 0.8 / 1.25 0.0 / 0.8 61.6 24.0 26.5
A M20 ¾" or ½" 8.4 14.3 12.5 20.5 0.8 / 1.25 0.0 / 0.8 63.0 30.0 32.5
B M25 1" or ¾" 11.1 19.7 16.9 26.0 1.25 / 1.6 0.0 / 0.7 69.9 36.0 39.5
C M32 1¼" or 1" 17.6 26.5 22.0 33.0 1.6 / 2.0 0.0 / 0.7 73.2 46.0 50.5
C2 M40 1½" or 1¼" 23.1 32.5 28.0 41.0 1.6 / 2.0 0.0 / 0.7 77.9 55.0 60.6
D M50 2" or 1½" 28.9 44.4 / 42.3¹ 36.0 52.6 1.8 / 2.5 0.0 / 1.0 93.5 65.0 70.8
E M63 2½" or 2" 39.9 56.3 / 54.3¹ 46.0 65.3 1.8 / 2.5 0.0 / 1.0 94.0 80.0 88.0
F M75 3" or 2½" 50.5 68.2 / 65.3¹ 57.0 78.0 1.8 / 2.5 0.0 / 1.0 103.0 95.0 104.0
G M80 3½" 67.0 73.0 75.0 89.5 2.0 / 3.5 0.0 / 1.0 90.6 106.4 115.0
H M90 3½" 67.0 77.6 75.0 89.5 2.0 / 3.5 0.0 / 1.0 90.6 115.0 130.0
J M100 4" 75.0 91.6 88.0 104.5 2.5 / 4.0 0.0 / 1.0 90.6 127.0 142.0
'T' — Os - F size metric entry threads are 1.5mm pitch as standard, 15mm length of thread. For G size glands and above, a 2mm pitch is supplied as
standard, 20mm length of thread (1.5mm pitch with 15mm length of thread can be supplied) please specify when ordering.
G size and above are available in the 501/453/RAC design style.
All dimensions in millimetres (except * where dimensions are in inches).
¹ Smaller value is applicable when selecting reduced NPT entry option.

² Sizes Os and O are available with an M16 thread size. For O size with M16 thread, the maximum cable inner sheath diameter is 10.9mm
Technical Data Features

ATEX/IECEx  Provides armour clamping using one clamping arrangement
 Flameproof Exdb IIC Gb, Increased Safety Exeb IIC Gb, for all armour / braid types.
Dust Extb IIIC Db and ExnR IIC Gc II 2 / 3GD.  Provides a diaphragm seal on inner sheath of cable which will
 Certificate No’s: Baseefa06ATEX0057X, Baseefa09ATEX0233X not damage cables that exhibit ‘Cold Flow’ characteristics.
and IECEx BAS 06.0014X.  Provides an outer deluge seal to prevent moisture ingress to
 Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22. the cable armour / braid.
 Construction and Test Standards: IEC/EN 60079-0,  Provides a cable retention and low smoke and fume, zero
IEC/EN 60079-1, IEC/EN 60079-7, IEC/EN 60079-15 and halogen seal onto the cables outer sheath.
IEC/EN 60079-31.  Manufactured in Brass (standard), Nickel Plated Brass, 316
 Ingress Protection: IP66, IP67 and IP 68* (30 metres for 7 days) Stainless Steel or Aluminium.
to IEC/EN 60529 and NEMA 4X.  Brass NPT entries are nickel plated as standard.
Alternative Reversible Armour Clamping Rings (RAC)
 Deluge Protection to DTS01.
SELECTION TABLE
 Operating Temperature Range: -60°C to +80°C.
Steel Wire Armour / Braid / Tape
 Assembly Instruction Sheet: AI 300.
Alternative certification options available:
Size Ref.
Orientation 1 Orientation 2
* Additional installation procedures required. B 0.9 - 1.25 0.5 - 0.9
C 1.2 - 1.6 0.6 - 1.2
C2 1.2 - 1.6 0.6 - 1.2
c CSA us D 1.45 - 1.8 1.0 - 1.45
 Flameproof AExd IIC Gb, Increased Safety AExe IIC Gb and Dust E 1.45 - 1.8 1.0 - 1.45
AExtD Zone 21. F 1.45 - 1.8 1.0 - 1.45
 Explosion-proof Class 1 Division 2 Groups ABCD, Class II
Division 2 Groups EFG, Class III. Ordering Information
 Certificate No’s: CSA1015065 for Marine Shipboard Cable. Format for ordering is as follows: Alternative Clamping Ring (AR),
 Construction and Test Standards: UL 60079-0, UL 60079-1, UL add suffix AR to ordering information.
60079-7, ISA 60079-31, CSA 22.2 No: 60079-0, CSA 22.2 No: Cable Gland Type Size Thread Material (Optional)
60079-1, CSA 22.2 No: 60079-7, CSA 22.2 No: 60079-31, UL 2225 501/453/UNIV C M32 Brass AR
501/453/UNIV C 1 ¼" NPT Brass AR
Connection Solutions
81
UPD 260318 www.ehawke.com

Hke - 501 453 Univ (Upd260318)

Uploaded by

Copyright:

Available Formats

Hke - 501 453 Univ (Upd260318)

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Hke - 501 453 Univ (Upd260318)

Uploaded by

Copyright:

Available Formats

501/453/UNIV

Group II Cable Glands

CABLE GLAND SELECTION TABLE

¹ Smaller value is applicable when selecting reduced NPT entry option.

Technical Data Features

You might also like