Scribd Logo
Upload

Welcome to Scribd!

  • 132 views

    Electric Mining Shovel General Specification: Capacity Working Ranges

    Uploaded by

    fabioxav
    P&H 2300XPC Specs

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Electric Mining Shovel General Specification: Capacity Working Ranges

    Uploaded by

    fabioxav
    132 views2 pages
    P&H 2300XPC Specs

    Original Title

    xs-5502_2300xpc_spec

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    P&H 2300XPC Specs

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    132 views2 pages

    Electric Mining Shovel General Specification: Capacity Working Ranges

    Uploaded by

    fabioxav
    P&H 2300XPC Specs

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 2

    2300XPC

    Electric Mining Shovel


    General Specification

    meters

    feet
    22 72.2

    20 65.6

    18 59.1

    16 52.5

    14 45.9

    12 39.4

    10 32.8

    8 26.2

    6 19.7

    4 13.1

    2 6.6

    0 0

    2 6.6
    meters 6 4 2 0 2 4 6 8 10 12 14 16 18 20 22 24
    feet 19.7 13.1 6.6 0 6.6 13.1 19.7 26.2 32.8 39.4 45.9 52.5 59.1 65.6 72.2 78.7
    C
      
    L ROTATION

    Working ranges Capacity


    Height of cut 13.5 m 44 ft. 3 in. Nominal payload* 45.4 mt 50 st
    Radius of cut 21.3 m 70 ft. 0 in. Nominal dipper capacity
    SAE struck 18.3-25.5 m3 24.0-33.0 yd3
    Dumping height*
    8.5 m 28 ft. 0 in. SAE 2:1 20.2-27.8 m3 26.7-36.7 yd3
    (door open)
    Rated suspended load 90.7 mt 100 st
    Floor level radius 14.2 m 46 ft. 7 in.
    Optimum truck size
    Tail swing radius 10.1 m 33 ft. 0 in. 109-218 mt 120-240 st
    (180 mt (200 st) truck shown)
    Operator eye level 7.9 m 26 ft. 0 in.
    *Payload and dipper capacity are dependent on many factors.
    *Height shown with bail-type dipper. Heights will be greater with bail-less or Contact Komatsu Mining for an analysis of your specific application.
    compact-bail dippers. Actual dumping height can be greater than door
    clearance height.
    2  P&H 2300XPC electric mining shovel general specification

    G
    H
    F
    D
    E

    Overall dimensions Propel


    A Width 12.5 m 40 ft. 10 in. Two rugged P&H planetary gear cases of proven design independently
    B Length 15.0 m 49 ft.   4 in. transmit torque to the drive sprockets, producing the tractive effort
    required for fast, efficient propel and positioning operations.
    C Height over gantry 11.6 m 38 ft.   0 in.
    P&H brand Delta drive system with heavy duty cast crawler shoes.
    1321 mm 52 in.
    D Width of crawler shoes
    1778 mm 70 in. Spring-set air release disc brakes – one per motor.
    E Width of crawlers (52") 8.7 m 28 ft.   5 in.
    F Length of crawlers 9.9 m 32 ft.   4 in. Crowd
    G Ground clearance 0.9 m   3 ft.   0 in. Powerband V-belt drive between motor and gear case absorbs
    Height — ground to bottom of shock loads.
    H 2.6 m 8 ft.   5 in.
    counterweight slabs
    First and second reduction gearing in enclosed gear case for reliable
    splash lubrication, ease of maintenance, and extended component life.
    Power requirements Twin-leg dipper handle with torsion box and rack and pinion drive has
    Supply voltage* 4160 or 7200V 3300, 5000, 6000 or 6600 inherent stability in the bank for optimal digging.
    3 phase, 60 Hz 3 phase, 50 Hz Spring-set air release disc brake.
    Supply transformer (minimum) 2000 kVA
    Minimum short circuit VA available at shovel 16 MVA
    Hoist
    *Voltage per customer requirements
    All gearing housed in single enclosed gear case with filtered and
    cooled oil fed to all bearings in addition to splash lubrication for reliable
    Swing operation and ease of maintenance.

    Two modular P&H planetary gear cases of proven design and a single Large 56" diameter hoist drum for extended rope bending life. Ferrule
    piece forged swing gear transmit torque for fast cycle times. becket system and dual electric tuggers are standard for efficient
    rope change.
    Spring-set air release disc brakes – one per motor.
    Spring-set air release disc brakes – one per motor.
    Splash lube filtration system.

    Product designs, specifications and/or data in this document are provided for informational purposes only
    Komatsu Mining Corp. Group and are not warranties of any kind. Product designs and/or specifications may be changed at any time without
    notice. The only warranties that apply to sales of products and services are standard written warranties,
    mining.komatsu which will be furnished upon request.
    Komatsu, Joy, Montabert, P&H, Delta and other trademarks and service marks used herein are the property
    of Komatsu Ltd., Komatsu Mining Corp., or their respective owners or licensees.
    © 2018 Komatsu Mining Corp. All rights reserved.

    EN-2300XPCSPEC01-0118-V2

    You might also like