Airline Norgren PDF

EXCELON® PRO Series
Combination shut off valve, filter/regulator and lubricator

BL92 – ø 8 mm, G1/4
Configuration flexibility
Excellent value
No tools required for assembly
Technical data
Medium:
Compressed air
Operating pressure:
Manual drain: 12 bar max.
Auto drain: 10 bar
Ambient temperature:
–20°C to +52°C
Consult our Technical Service for use below +2°C
Element:
5 µm
Outlet pressure adjustment range:
0,3 to 10 bar
airline (frl)
32 32
143 30,5 103 30,5
13,5
13,5
96,5
6,8 3
96,5
6,8 3
2
2
104
75 100
50 75 100
60
125
41
50
60
25 125
41
150 25
0 150
249 #
258 #
232,5
35,5
175 0
249 #
258 #
232,5
224
35,5
175
224
8
5
1/8” 1/8Ó
1/8” 1/8Ó
155 115
38,5
38,5
69,5
69,5
25,5 25,5
5
125,5 85,5
Models
Combination unit including filter/regulator, lubricator with shut off valve Combination unit including filter/regulator and lubricator without shut off valve
Auto drain manual drain Port Auto drain manual drain Port
Model Model Size Model Model Size
BL92-F11D BL92-F31D 8 mm BL92-F15D BL92-F35D 8 mm

BL92-211G BL92-231G G1/4 BL92-215G BL92-235G G1/4
PDF CAD For further information

www.norgren.com/info/nec/en174
174 store.norgren.com NORGREN EXPRESS – Orders

store.norgren.com
excelon® pro series Patented Connection System
1 4 5 6
ACCESSORy features
1 W
ALL MOUNTING BRACKET WITH PIF FITTING
3 To fix the device to the wall.
2 W
ALL MOUNTING BRACKET WITH THREAD
airline (frl)
To fix the device to the wall.
3 THREAD CONNECTOR
To connect the device directly.
4 SILENCER (SHUT-OFF VALVE)
For noise reduction when exhausting
Patented air to atmosphere.
connection system 5 Quick connector
Allows easy connection of one Excelon® PRO
Ease of Installation
unit to another.
Innovative patent pending connection design
combined with integral mounting brackets 6 Porting block
5
make the Excelon® Pro user friendly and easy When placed between a filter-regulator
to install. and lubricator allows branching off to systems
requiring a non-lubricated supply. The locking plates
are included in scope of supply (plugs not included)
Connection Push-in fitting Threaded connector Threaded connector Quick connector Shut off valve Porting block Accessories
size connector with with mounting without mounting
mounting bracket bracket bracket
– – – – 9210-50 T92T-NNN-B1N
9216-51 T40M0500
G 1/8 – 9212KIT-1G – – – – –
G 1/4 – 9212KIT-2G 9211KIT-2V – – – –
G 3/8 – 9212KIT-3G – – – – –
ø 6 mm 9213KIT-6D – – – – – –
ø 8 mm 9213KIT-8D – – – – – –
ø 10 mm 9213KIT-AD – – – – – –
ø 12 mm 9213KIT-BD – – – – – –
Easy ordering – 24/7 store.norgren.com 175

EXCELON® PRO SERIEs General purpose filter
F92G – ø 8 mm, G1/4
Excellent value
Technical data
Medium:
Compressed air
Operating pressure:
Automatic drain: 10 bar max.
–20°C to +52°C
Element:
5 µm
63
3
airline (frl)
6,8
2
41
60
8
181 #
189 #
127
136
1/8”
1/8”
5
75
38,5
65,5
45,5
Models Accessories
F92G Service Auto
Auto drain Manual drain Port Flow* kit drain
Model Model size
F92G-8DN-AT1 F92G-8DN-QT1 Ø 8 mm 19 dm3/s (1140 l/min) F92G-KIT 4000-50R

F92G-2GN-AT1 F92G-2GN-QT1 G1/4 19 dm3/s (1140 l/min) F92G-KIT 4000-50R
*Typical flow with 6,3 bar inlet pressure and 0,5 bar pressure drop

176 store.norgren.com NORGREN EXPRESS – Delivery

store.norgren.com
EXCELON® PRO SERIEs Coalescing filter

F92C – ø 8 mm, G1/4
Excellent value
Automatic drain and service life indicator
as standard
Technical data
Medium:
Compressed air
Operating pressure:
8 bar max.
–20°C to +52°C
Element:
0,01 µm
Remaining oil content:
0,01 mg/m3 at +21°C
Note:
63
Install with a 5 µm Pre-Filter upsteam
airline (frl)
6,8 3
2
28
41
60
8
181 #
127
1/8”
75
5
38,5
65,5
45,5
Models Accessories
F92C Service Auto
Auto drain Port Flow* kit drain
Model size
F92C-8DD-AT1 Ø 8 mm 4,6 dm3/s (276 l/min) F92C-KIT 4000-50R

F92C-2GD-AT1 G1/4 4,6 dm3/s (276 l/min) F92C-KIT 4000-50R
* Maximum flow at 6,3 bar to maintain stated oil removal performance. (staturated element)
For further information PDF CAD

Rapid delivery – order today store.norgren.com 177

EXCELON® PRO SERIES Regulator
R92G – ø 8 mm, G1/4
Excellent value
Technical data
Medium:
Compressed air
Operating pressure:
12 bar max.
–20°C to +60°C

0,3 to 10 bar
32
airline (frl)
63 30,5
13,5
96,5
6,8 3
138,5
2
60
75 100
50
41
125
25
150
0
175
8
75
5
38,5
69,5
25,5
45,5
Models Service Kit

R92G
Port Flow*
Model size
R92G-8DK-RMG Ø 8 mm 22 dm3/s (1320 l/min) R92G-KITR

R92G-2GK-RMG G1/4 22 dm3/s (1320 l/min) R92G-KITR
* Typical flow with 10 bar inlet pressure 6,3 bar set pressure and a 1 bar droop from set

178 store.norgren.com NORGREN EXPRESS – Service

store.norgren.com
EXCELON® PRO SERIEs Filter/regulator

B92G – ø 8 mm, G1/4
Excellent value
Technical data
Medium:
Compressed air
Operating pressure:
Automatic drain: 10 bar max.
–20°C to +52°C
Element:
5 µm
32
0,3 to 10 bar
63 30,5
airline (frl)
13,5
96,5
6,8 3
2
75 100
50
41
60
125
25
150
0
175
8
181 #
127,5
189 #
135,5
1/8”
1/8”
75
5
38,5
69,5
25,5
5
45,5
Models Accessories
b92G Service Auto
Auto drain Manual drain Port Flow* kit drain
Model Model size
B92G-8DK-AT1-RMG B92G-8DK-QT1-RMG Ø 8 mm 16 dm3/s (960 l/min) B92G-KITR 4000-50R

B92G-2GK-AT1-RMG B92G-2GK-QT1-RMG G1/4 16 dm3/s (960 l/min) B92G-KITR 4000-50R

Can’t find it – call the Express Team store.norgren.com 179

EXCELON® PRO SERIEs Lubricator (oil-fog)
L92C – ø 8 mm, G1/4
Excellent value
Technical data
Medium:
Compressed air
Operating pressure:
12 bar max.
–20°C to +52°C
63
6,8 3
airline (frl)
2
51
41
60
8
Express plus
223,5 #
170
Have you thought about...

Lubricators extend system’s life up to 4 times,
saving you money
75
5
38,5
69,5
45,5
Models Symbol 8.10

Service Kit
l92c
Port Flow*
Model size
L92C-8DP-ETN Ø 8 mm 24 dm3/s (1440 l/min) L92C-KIT

L92C-2GP-ETN G1/4 24 dm3/s (1440 l/min) L92C-KIT


store.norgren.com
Excelon modular system

Combination filter/regulators and lubricators
BL72, 73, 74 – G1/4 … G1/2
Boxed sets include: filter/regulator and micro-
fog lubricator complete with exhausting shut-off
valve, pressure gauge and mounting brackets
High efficiency water and particle removal
Quick release bayonet bowls
Push to lock adjusting knob with tamper
resistant option
All round (360°) visibility of lubricator sight feed
164* 218** 257*** dome for ease of drip rate setting
164* 218** 257***
Micro-fog lubricator for most general purpose
pneumatic applications
127***
127***
Technical data
96**96**
73*73*
304***
Medium:
304***
Compressed air
252**
# #
230***
252**
Maximum inlet pressure:

230***
214*
214*
207**
10 bar
207**
192*
Gauge ports:
192*
RC 1/8
airline (frl)
–20°C to +50°C
74**74**

48*48*
Pressure range:
56**56**
0,3 ... 10 bar

35*35*
*BL72, **BL73, ***BL74

# Minimum clearance required to remove bowl
Models Accessories
boxed sets bl72, bl73 and bl74 WITH shut-off valve Tamper Quick fill Filter element
Auto drain manual drain Port resistant kit nipple (40 micron)
Model Model Size Bowl
5
BL72-201GA BL72-221G G1/4 T 4255-51 – 5925-02
BL73-301G BL73-321G G3/8 T 4455-51 18-011-024 4438-03
BL74-401G BL74-421G G1/2 GT 4355-51 18-011-024 4338-05
boxed sets bl72, bl73 and bl74 without shut-off valve Tamper Quick fill Filter element
Auto drain manual drain Port resistant kit nipple (40 micron)
Model Model Size Bowl
BL72-205GA BL72-225G G3/8 T 4255-51 – 5925-02

BL73-305G BL73-325G G3/8 T 4455-51 18-011-024 4438-03
BL74-405G BL74-425G G1/2 GT 4355-51 18-011-024 4338-05
T=Transparent bowl GT= Guarded transparent bowl For full service kits including drains refer to individual units


Excelon modular system General purpose filters
F72G, F73G, F74G – G1/4 to G3/4
Excelon design allows in-line installation

or modular installation with other
Excelon products
Quick release bayonet bowl
Technical data
Medium:
Compressed air only
10 bar
–34°C to +50°C
airline (frl)
Express plus
A

B#
Minimise wear and avoid damaging your

compressed air system by carrying out routine
maintenance on the filters. See the blue
shaded area on the page to select the correct
F service kit.
5
G
Dimensions
Series Drain A B C F G
72 Auto 141 192 19 50 48
Manual 134 185 19 50 48
73 Auto 147 207 25 68 62
Manual 156 216 25 68 62
74 Auto 161 230 25 80 74
Manual 177 246 25 80 740


store.norgren.com
Excelon modular system General purpose filters

F72G, F73G, F74G – G1/4 to G3/4
Models Accessories Service Kit

F72g series Wall mounting Auto Manual
Auto drain Manual drain Port Flow* Bowl bracket drain drain
Model Model size (dm3/s)
F72G-2GN-AL3 F72G-2GN-QT3 G1/4 30 T 4224-50 F72G-KITA40 F72G-KITM40

F72G-3GN-AL3 F72G-3GN-QT3 G3/8 30 T 4224-50 F72G-KITA40 F72G-KITM40

F73G-2GN-AT3 F73G-2GN-QT3 G1/4 29 T 4424-50 F73G-KITA40 F73G-KITM40


airline (frl)
F74G-3GN-AP3 F74G-3GN-QP3 G3/8 66 GT 4324-50 F74G-KITA40 F74G-KITM40
GT= Guarded transparent bowl. T=Transparent bowl *Typical flow with 6,3 bar inlet pressure and 0,5 bar pressure drop

‘Puraire’ oil removal filters
®
F72C, F73C, F74C, F74H – G1/4 to G3/4

Excelon design allows in-line installation or
modular installation with other Excelon products
High efficiency oil and particle removal
Service indicator standard
Technical data
Medium:
Compressed air
10 bar transparent bowl or guarded
8 bar transparent bowl F72C with auto drain
0,01 mg/m3 at +21°C
Particle removal:
To 0,01 µm
–34°C to +50°C
airline (frl)
E
C
A
5
B#
F
G
Dimensions
Series Drain A B C E F G
F72C Auto 141 192 19 53 50 48
Manual 134 185 19 53 50 48
F73C Auto 147 207 25 60 68 62
Manual 156 216 25 60 68 62
F74C Auto 161 230 25 60 80 74
Manual 177 246 25 60 80 74


store.norgren.com
Excelon modular system ‘Puraire’® oil removal filters

F72C, F73C, F74C, F74H – G1/4 to G3/4

F72c series Wall mounting
Auto drain Manual drain Port Flow* Bowl bracket
F72C-2GD-AL0 F72C-2GD-QT0 G1/4 4,5 T 4224-50 F72C-KITA0C

F72C-3GD-AL0 F72C-3GD-QT0 G3/8 4,5 T 4224-50 F72C-KITA0C

F73C-2GD-AT0 F73C-2GD-QT0 G1/4 10 T 4424-50 F73C-KITA0C


airline (frl)
F74C-3GD-AP0 F74C-3GD-QP0 G3/8 16 GT 4324-50 F74C-KITA0C
F74C-4GD-AP0 F74C-4GD-QP0 G1/2 16 GT 4324-50 F74C-KITA0C
GT= Guarded transparent bowl. T=Transparent bowl. *To maintain stated oil content at 6,3 bar inlet pressure
F74h series Wall mounting

F74H-4GD-AP0 F74H-4GD-QP0 G1/2 28 GT 4324-50 F74H-KITA0C

5
F74H-6GD-AP0 F74H-6GD-QP0 G3/4 28 GT 4324-50 F74H-KITA0C
GT= Guarded transparent bowl
Express plus
Compressed air is costly - 7% extra for every 1
bar not needed. Don’t let anyone tamper with
your pressure settings; fit a lockshroud or
tamperproof cap

‘Ultraire’ oil vapour removal filters
®
F72V, F74V – G1/4 to G3/4

Excelon design allows in-line or modular
installation with other Excelon products
Adsorbing type activated carbon element removes
oil vapours and most hydrocarbon odours
High intensity blue colour change indication (F72V)
Technical data
Medium:
Compressed air
19
10 bar (F72V)
17 bar (F74V)
114
175*
0,003 mg/m3 max. at +21°C.
Transparent bowl: -34°C to +50°C (F72V)
Metal bowl: –34°C to +65°C (F74V) 50

airline (frl)
48
* Minimum clearance required to remove bowl

F72v series Wall mounting
Model Port Flow* Bowl bracket
5
size (dm3/s)
F72V-2GN-ETC G1/4 1,6 T 4224-50 F72V-KITA0V

F72V-3GN-ETC G3/8 1,6 T 4224-50 F72V-KITA0V
F74v series Wall mounting

size (dm3/s)
F74V-3GN-EMA G3/8 13 M 4324-50 F74V-KITA0V

M= Metal bowl. T=Transparent bowl * To maintain stated oil content at 6,3 bar inlet pressure


store.norgren.com
Excelon modular system Pressure regulators

R72G, R73G, R74G – G1/4 to G3/4
Excelon design allows in-line or modular

B
installation
C
Balanced valve design for optimum

pressure control
A
Standard relieving models allow reduction

of downstream pressure when the system is
dead-ended
F Push to lock adjusting knob with tamper
resistant accessory
Technical data
G
Medium: Compressed air

H
Maximum inlet pressure: 20 bar

Gauge ports: Rc1/8
Dimensions –34°C to +65°C (R72G)
Series A B C F G H Panel Ø Panel depth –34°C to +80°C (R73G & R74G)
72 73 33 26 50 48 35 40 0 ... 4 Consult our Technical Service for use below +2°C
73 96 39 31 68 62 56 48 2 ... 6
74 127 43 31 80 74 56 52 2 ... 6. Pressure range: 0,3 ... 10 bar
airline (frl)
GrSym,Reg,Rel
r72g series Wall Neck Gauge Tamper
Model Port Flow* mounting mounting 0 … 10 bar resistant
size (dm3/s) bracket bracket kit
R72G-2GK-RMN G1/4 33 4224-50 74316-50 18-013-989 4255-51 R72G-KITR

R72G-3GK-RMN G3/8 33 4224-50 74316-50 18-013-989 4255-51 R72G-KITR
GrSym,Reg,Rel
5
R73G-2GK-RMN G1/4 50 4424-50 4461-50 18-013-013 4455-51 R73G-KITR

R73G-3GK-RMN G3/8 60 4424-50 4461-50 18-013-013 4455-51 R73G-KITR
R73G-4GK-RMN G1/2 60 4424-50 4461-50 18-013-013 4455-51 R73G-KITR
GrSym,Reg,Rel
R74G-3GK-RMN G3/8 98 4324-50 4368-51 18-013-013 4355-51 R74G-KITR

R74G-4GK-RMN G1/2 105 4324-50 4368-51 18-013-013 4355-51 R74G-KITR
R74G-6GK-RMN G3/4 105 4324-50 4368-51 18-013-013 4355-51 R74G-KITR
*Typical flow with 10 bar inlet pressure, 6,3 bar set pressure and 1 bar drop from set


Excelon modular system Filter/regulators
B72G, B73G, B74G – G1/4 to G3/4
Excelon design allows in-line installation or

modular installation with other Excelon products
High efficiency water and particle removal
E
C
resistant accessory
Technical data
A
B#
Medium:
Compressed air only
10 bar F
Pressure range: Dimensions

0,3 ... 10 bar
G
Series Drain A B C E F G H Panel Ø
Gauge ports: 72 Auto 141 192 26 73 50 48 35 40
Manual 134 185 26 73 50 48 35 40
Rc1/8
Auto 147 207 31 96 68 62 56 48
H
73
Ambient temperature: Manual 156 216 31 96 68 62 56 48
74 Auto 161 230 31 127 80 74 56 52
–34°C to +50°C # Minimum clearance
Manual 177 246 31 127 80 74 56 52 required to remove bowl

airline (frl)
GrSym,F/R,Auto,Rel
b72g series Wall Neck Gauge Tamper Auto Manual
Auto drain Manual drain Port Flow* Bowl mounting mounting 0…10 bar resistant drain drain
Model Model size (dm3/s) bracket bracket kit
B72G-2GK-AL3-RMN B72G-2GK-QT3-RMN G1/4 38 T 4224-50 74316-50 18-013-989 4255-51 B72G-KITA40R B72G-KITM40R

B72G-3GK-AL3-RMN B72G-3GK-QT3-RMN G3/8 38 T 4224-50 74316-50 18-013-989 4255-51 B72G-KITA40R B72G-KITM40R
GrSym,F/R,Auto,Rel
Auto drain Manual drain Port Flow* Bowl mounting mounting 0…10 bar resistant cover drain drain
5
Model Model size (dm3/s) bracket bracket and seal wire
B73G-2GK-AT3-RMN B73G-2GK-QT3-RMN G1/4 49 T 4424-50 4461-50 18-013-013 4455-51 B73G-KITA40R

B73G-KITM40R
B73G-KITM40R
B73G-KITM40R
GrSym,F/R,Auto,Rel
Auto drain Manual drain Port Flow* Bowl mounting mounting 0…10 bar resistant cover drain drain
Model Model size (dm3/s) bracket bracket and seal wire
B74G-3GK-AP3-RMN B74G-3GK-QP3-RMN G3/8 77 GT 4324-50 4368-51 18-013-013 4355-51 B74G-KITA40R

B74G-KITM40R
B74G-KITM40R
B74G-KITM40R
GT= Guarded transparent bowl. T=Transparent bowl *Typical flow with 10 bar inlet pressure, 6,3 set pressure and 1 bar drop from set


store.norgren.com
Excelon modular system Filter/regulators

B72G, B73G, B74G – G1/4 to G3/4
Patented quikclamp
+ + =
connection system
Allows easy connection of one Excelon unit
to another
One piece – no loose parts
Uniquely, connected products can be rotated in
90º increments
Secure mounting to a wall, panel or
machine surface
5
ACCESSORy features
1 WALL MOUNTING BRACKET
To fix the device to the wall
1 2 2 NECK MOUNTING BRACKET

3
To fix the device on panel or wall
3 GAUGE
To monitor the working pressure
4 3/2 SHUT-OFF VALVE
Slide valve with lockable blade. Threaded exhaust port
airline (frl)
4 6 7 7 5 TAMPER RESISTANT KIT
Simple accessory to prevent unauthorised
adjustment of regulated pressure
6 SILENCER (SHUT-OFF VALVE)
For noise reduction when exhausting air
to atmosphere
7 QUICKCLAMP
With or without bracket
Models Accessories
Port size

3/2 shut-off
valve*

Quikclamp Quikclamp
and Quikclamp
wall bracket
Silencer
(shut-off valve) 5
b72g series G1/4 T72T-2GA-P1N 4214-51 4214-52 T40M0500

B74g series G3/8 T74T-3GA-P1N 4314-51 4214-52 T40B1800
*Threaded exhaust port

Excelon modular system Lubricators
L72, L73, L74 – G1/4 to G3/4
D**
Excelon design allows in-line or
E
modular installation
C
Flow sensor provides a nearly constant oil/air
ratio over a wide range of flows
All round (360°) visibility of sight-feed dome for
B#
A
ease of drip rate setting
Micro-fog lubricators for best lubrication in
general purpose pneumatic applications
Technical data F
G
Maximum inlet pressure: 10 bar
Start point: L72M 0,94 dm3/s, L73M 0,71 dm3/s,
L74M 0,94 dm3/s **Optional Pyrex sight-feed dome
Minimum flow required for lubricator operation # Minimum clearance required to remove bowl
at 6,3 bar inlet pressure
Bowl capacity: L72 0,05 l, L73 0,10 l, L74 0,20 l
Dimensions
Series A B C D E F G
Ambient temperature: –20°C to +50°C
Consult our Technical Service for use below +2°C 72 110 191 19 64 41 50 48
73 156 255 25 70 47 68 62
74 177 276 25 68 47 80 74
ModelsSymbol 8.10 Accessories Service Kit

airline (frl)
boxed sets l72 series Wall mounting

size (dm3/s)
L72M-2GP-ETN G1/4 24 T 4224-50 L72M-KIT

L72M-3GP-ETN
Symbol 8.10 G3/8 24 T 4224-50 L72M-KIT

5
size (dm3/s)
L73M-2GP-ETN G1/4 50 T 4424-50 L73M-KIT

L73M-3GP-ETN G3/8 64 T 4424-50 L73M-KIT

L73M-4GP-ETNSymbol 8.10 G1/2 64 T 4424-50 L73M-KIT

size (dm3/s)
L74M-3GP-QPN G3/8 50 GT 4324-50 L74M-KIT

GT= Guarded transparent bowl T=Transparent bowl * Typical flow with 6,3 bar inlet and 0,5 bar pressure drop


store.norgren.com
Excelon modular system Pressure relief valves

V72G, V74G – G1/4to G 3/4
Excelon design allows in-line installation

or modular installation with other
Excelon products
resistant accessory
Helps protect air operated equipment from over
pressurisation
Norgren pressure relief valves comply with category O(S.E.P.)
and category 1 of the Pressure Equipment Directive 97/23/EC.
Technical data
B
C
Medium:
Compressed air
A
Gauge ports:
Rc1/8
F Relief port:
G1/4 (V72G), G1/2 (V74G)
G
–34°C to +65°C (V72G)

–34°C to +80°C (V74G)
H
airline (frl)
Relief pressure adjustment range:
0,3 ... 10 bar
Dimensions
Series A B C F G H Panel Ø Panel depth
72 73 25 26 50 48 35 40 0 ... 4
74 127 43 31 80 74 56 52 2 ... 6

v72g series Wall Neck Gauge Tamper Silencer
Model

Port
size
mounting mounting
bracket bracket
0 … 10 bar resistant
kit
5
GrSym,RelVlv
V72G-2GK-NMN G1/4 4224-50 74316-50 18-013-989 4255-51 MB002B V72G-KIT

v74g series Wall Neck Gauge Tamper Silencer

Model Port mounting mounting 0 … 10 bar resistant
size bracket bracket kit
GrSym,RelVlv



Excelon modular system Soft start/dump valves
P72F, P74F – G1/4 to G3/4
Assists machine designers in complying with the

European Machineries Directive
Can help existing machinery to comply with
PUWER (Provision and Use of Work
Equipment Regulations)
Controlled increase of downstream pressure on
start up
High forward flow capacity
High flow dump facility
Technical data
Maximum operating pressure:
10 bar (solenoid pilot operated), 1 2
17 bar (air pilot operated)
116
162
Minimum operating pressure: 3 bar
144
45
91
88
212
–20°C to + 65°C P72F, –20°C to + 80°C P74F
156
Rc1/4
Consult our Technical Service for use below +2°C Rc1/4
Rc1/4**
66 66
Air pilot port: P72F M5, P74F Rc1/4 84
Exhaust port: P72F Rc1/4, P74F G1/2

24
24
48
48
airline (frl)
Maximum flow: P72F 21 dm3/s, P74F 57 dm3/s 37

M5
Note: Maximum flow with 6,3 bar inlet pressure and pressure
74
84
drop of 0,5 bar

*Exhaust port
Snap pressure: **Pilot port
37
G1/2*
74
30
Full flow when downstream pressure reaches
50 to 80% of inlet pressure G1/2*
30
Models Accessories
p72f series - 24V d.c. Silencer Connector plug
solenoid pilot operated air pilot operated Port Drawing with cable gland
Model Model size No.
5
Solenoid pilot operated Air pilot operated
P72F-2GC-PFN P72F-2GA-NNN G1/4 1 MB002B 0657868000000000

P72F-3GC-PFN – G3/8 1 MB002B 0657868000000000
p74f series - 24V d.c. Silencer Connector plug

solenoid pilot operated air pilot operated Port Drawing with cable gland
Model Model size No.
P74F-4GC-PFN P74F-4GA-NNN G1/2 2 MB004B 0657868000000000

P74F-6GC-PFN – G3/4 2 MB004B 0657868000000000


store.norgren.com
Olympian Plus plug-in system

Combination filter/regulators and lubricator
BL64, 68 – G1/2 & G1
Complete air processing units pre-assembled,
ready to install
Boxed sets include: filter/regulator and micro-fog
lubricator complete with exhausting shut-off
valve, pressure gauge and mounting brackets
Technical data
Medium:
Compressed air only
17 bar
–20°C to +80°C
BL64 ø 47
BL68 Consult our Technical Service for use below +2°C
223 24 Pressure range:

194
125
BL64: 0,3...10 bar

135
63
8,5
BL68: 0,4...8 bar

30,5
100
110
93
Gauge ports:
8,2
361
343
190
208
169
190
146
225 #
310 #
162
Rc1/8
303 #
2,8
14,5
G 1/8
airline (frl)
G 1/8
370
362
3,5
2
48
85
72
~ 77
126
108
ca. 160
ø 50
233
Models Accessories
Boxed sets BL64 and BL68 with shut-off valve Tamper Quick fill Filter element
5
Auto drain Manual drain Port size resistant kit nipple (40 micron)
Model Model
BL64-401 BL64-421 G1/2 4355-50 18-011-024 4338-02

BL68-801 BL68-821 G1 4355-50 18-011-024 5576-99
Boxed sets BL64 and bl68 without shut-off valve Tamper Quick fill Filter element
Auto drain Manual drain Port size resistant kit nipple (40 micron)
Model Model
BL64-405 BL64-425 G1/2 4355-50 18-011-024 4338-02

BL68-805 BL68-825 G1 4355-50 18-011-024 5576-99
For full service kits including drains refer to individual units


General purpose filters
F64G, F68G – G1/4 to G 11/2
Effective liquid removal and positive

solid filtration
Large filter element area for minimum
pressure drop
Technical data
Medium:
Compressed air only
Maximum inlet pressure: F64G F68G
37
17 bar
44
–20°C to +80°C
164
171

217#
224#
190
197
343
350
5,5
G1/8-5,5
Express plus G 1/8

61
# Minimum clearance
Did you know... required to remove bowl 157 (G 3/4) 190
G 1 1/4 + G 1 1/2 = 200
You can also purchase 105
airline (frl)
individual filter elements

as spares as an alternative
54
to a complete service kit.
58
74
Please call your Express Team

F64G series Wall mounting 3/2 Shut-off Silencer Auto Manual
Auto drain Manual drain Port size Flow* bracket valve** (shut-off valve) drain drain
Model Model (dm3/s)
5 F64G-2GN-AD3 F64G-2GN-MD3 G1/4 33 74504-50 T64T-2GB-P1N T40B1800 F64G-KITA40 F64G-KITM40

F64G-3GN-AD3 F64G-3GN-MD3 G3/8 66 74504-50 T64T-3GB-P1N T40B1800 F64G-KITA40 F64G-KITM40
F68G series Wall mounting 3/2 Shut-off Silencer Auto Manual

Auto drain Manual drain Port size Flow* bracket valve** (shut-off valve) drain drain
Model Model (dm3/s)
F68G-6GN-AR3 F68G-6GN-MR3 G3/4 160 18-001-979 T68H-6GB-B2N T40B2800 F68G-KITA40 F68G-KITM40

F68G-8GN-AR3 F68G-8GN-MR3 G1 190 18-001-979 T68H-8GB-B2N T40B2800 F68G-KITA40 F68G-KITM40
F68G-AGN-AR3 F68G-AGN-MR3 G1 1/4 200 18-001-978 T68H-AGB-B2N T40B2800 F68G-KITA40 F68G-KITM40
F68G-BGN-AR3 F68G-BGN-MR3 G1 1/2 200 – T68H-BGB-B2N T40B2800 F68G-KITA40 F68G-KITM40
* Typical flow with 6,3 bar inlet pressure and 0,5 bar pressure drop **Threaded exhaust port
For replacement filter (without yoke) substitute ‘N’ at the 5th and 6th digits eg: F68G-NNN-AR3 (F68)


store.norgren.com

®
‘Puraire’ high efficiency oil removal filters
F64C/H, F68C/H – G1/4 to G1
High efficiency coalescing filters
Coalescing element removes sub-micron
particles and converts oil and water mist to
liquid form to drain away
Service indicator standard
Technical data
Medium:
Compressed air only
17 bar
F64C/H F68C/H Remaining oil content:

0,01 mg/m3 max at 21º C
23
79
79
Verwijdering vaste deeltjes:
37
44
44
To 0,01 µm
190
165
251
240#
–20°C to +65°C
343
445
218
293#
5,5

G 1/8
5,5
G 1/8 - 5,5 61
G 1/8
157 (G 3/4) 61
airline (frl)
105
ø 33 (G 3/4)
190
54
58
74

F64C/H series Wall mounting 3/2 Shut-off Silencer Auto
Auto drain Port size Flow* bracket valve** (shut-off valve) drain
Model (dm3/s)
F64C-2GD-AD0 G1/4 16 74504-50 T64T-2GB-P1N T40B1800 F64C-KITA0C

5
F64H-3GD-AD0 G3/8 28 74504-50 T64T-3GB-P1N T40B1800 F64H-KITA0C
F68C/H series Wall mounting 3/2 Shut-off Silencer Auto

Auto drain Port size Flow* bracket valve** (shut-off valve) drain
Model (dm3/s)
F68C-4GD-AR0 G1/2 35 18-001-979 T68H-4GB-B2N T40B2800 F68C-KITA0C

F68H-6GD-AU0 G3/4 35 18-001-979 T68H-6GB-B2N T40B2800 F68H-KITA0C
F68H-8GD-AU0 G1 60 18-001-979 T68H-8GB-B2N T40B2800 F68H-KITA0C
* To maintain stated oil content at 6,3 inlet pressure **Threaded exhaust port
For replacement filter (without yoke) substitute ‘N’ at the 5th and 6th digits eg: F68H-NND-AU0


‘Ultraire’® high efficiency oil/oil vapour removal filters
F64B/L, FFV68 – G1/4 to G1
F64B/F64L are ‘dual function’ products
incorporating an oil removal element (bottom)
and an oil vapour removal element (top)
FFV68 are two separate coupled filters (F68C/H
and F68V/Y)
Ultra high efficiency coalescing filters with
active carbon pack
Carbon pack assists in the removal of hydro-
carbon gases and odours
High intensity blue colour change indication F64L
(64 Series)
F64B
Technical data FFV68
123
123
79
123
Medium:
123
44
44
Compressed air only
286 (296**)#
147 (157**)
197 (207**)
251 #
17 bar
336 (346**)#
251
286 (296**)#
445 #
147 (157**)
197 (207**)

336 (346**)#
0,003 mg/m3 (at 21º C) G 1/8 - 5,5
5,5
Particle removal:
airline (frl)
G 1/8 - 5,5 G 1/8 61

G 1/8 - 5,5
To 0,01 µm 105 61
G 1/4
157 (G 3/4)
Ambient temperature: G 1/8 - 5,5 315 **
ø 33 (G 3/4)
105 105
–20°C to +65°C
58
74
G 1/4
157 (G 3/4)
ø 33 (G 3/4)
54
105
58
74
58
74
74
58
**Manual drain. # Minimum clearance required to remove bowl

F64b/l series Wall mounting 3/2 Shut-off Silencer Auto
Auto drain Port size Flow* bracket valve (shut-off valve) drain
5
Model (dm3/s)
F64B-2GN-AR0 G1/4 7 74504-50 T64T-2GB-P1N T40B1800 F64B-KITA0V

F64L-3GN-AR0 G3/8 11 74504-50 T64T-2GB-P1N T40B1800 F64L-KITA0V
F64L-4GN-AR0 G1/2 11 74504-50 T64T-2GB-P1N T40B1800 F64L-KITA0V
Ffv68 series Wall mounting 3/2 Shut-off Silencer Auto

Auto drain Port size Flow* bracket valve (shut-off valve) drain
Model (dm3/s)
FFV68-408 G1/2 25 18-001-979 T68H-4GB-B2N T40B2800 F68C-KITA0C, F68V-KIT00V

FFV68-608 G3/4 35 18-001-979 T68H-6GB-B2N T40B2800 F68H-KITA0C, F68V-KIT00V
FFV68-808 G1 60 18-001-979 T68H-8GB-B2N T40B2800 F68H-KITA0C, F68V-KIT00V
* To maintain stated oil at 6,3 bar inlet pressure


store.norgren.com

Breathing air sets
FFB64 – G1/4 to G3/8
Pre-assembled combinations include a general

purpose pre-filter and ‘Ultraire’® oil/oil vapour
removal filter
Activated carbon pack assists in the removal of
hydro-carbon gases and odours
Pre filter extends life of oil removal filter
Technical data
Medium:
Compressed air only
17 bar
0,003 mg/m3 (at 21°C)
Particle removal:
To 0,01 µm
–20°C to +65°C
airline (frl)
123
270* 320**
286* 336**
G1/8
185
G1/8
5
37
74
* 1 mask model **2 mask model
Models Accessories
FFb64 series Wall mounting Silencer 3/2 shut-off
Auto drain Port Flow Number Primary bracket (shut-off valve) valve
Model size (dm3/s) of masks pre-filter (µm)
FFB64-208 G1/4 7 1 5 74504-50 T40B1800 T64T-2GB-P1N

FFB64-308 G3/8 11 2 5 74504-50 T40B1800 T64T-3GB-P1N
For service kit numbers refer to individual units


Pressure regulators
R64G, R68G – G1/4 to G1 1/2
Diaphragm and balanced valve design ensure
good regulation characteristics
Non-rising adjusting knob has snap-action lock
Technical data
Medium:
Compressed air only
Maximum inlet pressure: R68G
17 bar (R64G)
R64G
62
20 bar (R68G)
Gauge ports:
197
Rc1/8
176#
221#
133#
210*
–20˚C to +80˚C
Pressure range: Ø 45 190***
R64G: 0,3...10 bar 105 (157 G3/4)
R68G: 0,4...8 bar
54
37
74
airline (frl)
*Minimum clearance required to remove unit from yoke

***For 1 1/4 and 1 1/2 ported yokes add 10 mm
# Reduces by 4 mm with knob in locked position

r64g series Wall Gauge 3/2 Shut-off Silencer Tamper
Model Port Flow* mounting 0 … 10 bar valve** (shut-off resistant
size (dm3/s) bracket valve) kit
Symbol 8.15
5 R64G-2GK-RMN G1/4 35 74504-50 18-013-013 T64T-2GB-P1N T40B1800 4355-50 R64G-KITR

R64G-3GK-RMN G3/8 80 74504-50 18-013-013 T64T-3GB-P1N T40B1800 4355-50 R64G-KITR
r68g series Wall Gauge 3/2 Shut-off Silencer Tamper

Model Port Flow* mounting 0 … 10 bar valve (shut-off resistant
size (dm3/s) bracket valve) kit
Symbol 8.15
R68G-6GK-RLN G3/4 150 18-001-979 18-013-013 T68H-6GB-B2N T40B2800 4355-50 R68G-KITR

R68G-8GK-RLN G1 180 18-001-979 18-013-013 T68H-8GB-B2N T40B2800 4355-50 R68G-KITR
R68G-AGK-RLN G1 1/4 180 18-001-978 18-013-013 T68H-AGB-B2N T40B2800 4355-50 R68G-KITR
R68G-BGK-RLN G1 1/2 180 – – T68H-BGB-B2N T40B2800 4355-50 R68G-KITR
* Typical flow with 10 bar inlet pressure, 6,3 bar set pressure 1 bar drop from set
For replacement regulator (without yoke) substitute ‘N’ at the 5th and 6th digits eg: R68G-NNK-RLN


store.norgren.com

Filter/regulators
B64G, B68G – G1/4 to G11/2
High efficiency water removal
Good regulation characteristics
Technical data
Medium:
Compressed air only
ø 47 Maximum inlet pressure:
17 bar
Gauge ports:
125 (121**)
45
Rc1/8
135 ##
B64G B68G Ambient temperature:
37
–20°C to +80°C
5#

Pressure range:
190
162
169
197
343
350
B64G: 0,3...10 bar

310#
303#
5,5
G 1/8
B68G: 0,4...8 bar
G 1/8 - 5,5 61
157 (G 3/4) 190

ø 33 (G 3/4)
105 G 1 1/4 + G 1 1/2 = 200
airline (frl)
54
58
74
# Minimum clearance required to remove bowl. ## Reduces by 4 mm with knob in locked position
** Knob in locked position
Symbol 8.6
B64G series Wall Gauge 3/2 Tamper Silencer Auto Manual
Auto drain Manual drain Port Flow* mounting 0…10 bar Shut-off resistant (shut-off drain drain
Model Model size (dm3/s) bracket valve kit valve)
B64G-2GK-AD3-RMN B64G-2GK-MD3-RMN G1/4 30 74504-50 18-013-013 T64T-2GB-P1N 4355-50 T40B1800 B64G-KITA40R B64G-KITM40R
5
Symbol 8.6
B68G series Wall Gauge 3/2 Tamper Silencer Auto Manual

Auto drain Manual drain Port Flow* mounting 0…10 bar Shut-off resistant (shut-off drain drain
Model Model size (dm /s) bracket
3
valve kit valve)
B68G-6GK-AR3-RLN B68G-6GK-MR3-RLN G3/4 240 18-001-979 18-013-013 T68H-6GB-B2N 4355-50 T40B2800 B68G-KITA40R B68G-KITM40R
B68G-8GK-AR3-RLN B68G-8GK-MR3-RLN G1 240 18-001-979 18-013-013 T68H-8GB-B2N 4355-50 T40B2800 B68G-KITA40R B68G-KITM40R
B68G-AGK-AR3-RLN B68G-AGK-MR3-RLN G1 1/4 240 18-001-978 18-013-013 T68H-AGB-B2N 4355-50 T40B2800 B68G-KITA40R B68G-KITM40R
B68G-BGK-AR3-RLN B68G-BGK-MR3-RLN G1 1/2 240 – 18-013-013 T68H-BGB-B2N 4355-50 T40B2800 B68G-KITA40R B68G-KITM40R
* Typical flow with 10 bar inlet pressure, and 1 bar set pressure and 1 bar drop from set
For replacement filter/regulator (without yoke) substitute “N” at the 5th and 6th digits eg. B68G-NNK-AR3-RLN


Lubricators
L64, L68 – G1/4 to G11/2
Micro-fog plug-in lubricators for best lubrication
in general purpose pneumatic applications
Technical data
Medium:
Compressed air only
17 bar
Start point:
L64 L68
L64: 1,5 dm3/s
L68: 6 dm3/s
63
74
Bowl Capacity (litre):
37
L64: 0,2
L68: 0,5
190
146
343
225**
–20°C to +80°C
61
157 (G 3/4)
(G1Ê, G1Ë - 200)
ø 33 (G 3/4)
105
airline (frl)
54
58
74
** Minimum clearance required to remove bowl

Symbol 8.10
l64 series Wall mounting 3/2 Shut-off Silencer
Model Port Flow* bracket valve (shut-off valve)
size (dm3/s)
5 L64M-2GP-EDN G1/4 25 74504-50 T64T-2GB-P1N T40B1800 L64M-KIT

L64M-3GP-EDN G3/8 62 74504-50 T64T-3GB-P1N T40B1800 L64M-KIT
Symbol 8.10
l68 series Wall mounting 3/2 Shut-off Silencer
Model Port Flow* bracket valve (shut-off valve)
size (dm3/s)
L68M-6GP-ERN G3/4 200 18-001-979 T68H-6GB-B2N T40B2800 L68M-KIT

L68M-8GP-ERN G1 200 18-001-979 T68H-8GB-B2N T40B2800 L68M-KIT
L68M-AGP-ERN G1 1/4 200 18-001-979 T68H-AGB-B2N T40B2800 L68M-KIT
L68M-BGP-ERN G1 1/2 200 – T68H-BGB-B2N T40B2800 L68M-KIT
* Typical flow with 6,3 bar inlet, 0,5 bar pressure drop. To order a basic unit without yoke substitute ‘N’ at the 5th and 6th letters respectively e.g. L68M-NNP-EDN
Models listed are Micro-fog. For Oil-fog models, including kits, replace ‘M’ at the 4th digit by ‘C’ e.g. L68C-4GP-EDN


store.norgren.com

Soft start/dump valves
P64F & P68F – G1/4 … G3/4
Assists machine designers in complying with the
European Machineries Directive
Can help existing machinery to comply with PUWER
(Provision and Use of Work Equipment Regulations)
Controlled increase of downstream pressure on start up
Solenoid, air pilot or manual operator
High forward flow capacity
High flow dump facility
Technical data
Medium:
Compressed air
10
190
P64F P64F Maximum operating pressure:

Solenoid Air Pilot P68F For solenoid operated versions: 10 bar
100
147
90
For pilot operated versions: 17 bar
G1/2
Minimum operating pressure:

55
37
3 bar
G1/2
55
37
–20°C to +80°C (solenoid version up to +50ºC)

156
195#
airline (frl)
245
269#
68
Air pilot port:

88
143#
Pg 9 42 P64F: Rc1/4 P68F: G1/4

Rc1/4
157 (G 3/4)
105 Exhaust port:
10
190
105
P64F: G1/2 P68F: G1

Maximum flow:
100
58
74
147
74
58
P64F: 57dm3/s P68F: 147dm3/s

90
G1/2
G1/2 Note: Maximum flow with 6,3 bar inlet pressure and pressure
drop of 0,5 bar
# Minimum clearance required to remove unit Snap pressure:
Full flow when downstream pressure reaches 50-80%
of inlet pressure
5
245
269#
Models Accessories
p64 f & P68 F series – 24V d.c. Wall 3/2 Shut-off Silencer Silencer Basic solenoid plug
solenoid pilot operated air pilot operated Port mounting valve (dump (shut-off
Model Model size bracket valve) valve)
P64F-2GC-PFN P64F-2GA-NNN G1/4 74504-50 T64T-2GB-P1N MB004B T40B1800 0657868000000000

P68F-6GH-NPN – G3/4 18-001-979 T68C-6GB-B2N MB008B – M/P15737
P68F-8GH-NPN – G1 18-001-979 T68C-8GB-B2N MB008B – M/P15737
P68F-AGH-NPN – G1 1/4 18-001-978 T68C-AGB-B2N MB008B – M/P15737
P68F-BGH-NPN – G1 1/2 – T68C-BGB-B2N MB008B – M/P15737


Pressure relief valves
V64H, V68H – G1/4 to G1
Olympian relief valves protect compressed air
systems from over-pressurisation
High relief capacity, sensitive and accurate
Threaded relief port for silencer or piped exhaust
Norgren pressure relief valves comply with category O(S.E.P.) and
category 1 of the Pressure Equipment Directive 97/23/EC.
Technical data
Medium:
Compressed air only
Gauge ports: V64H V68H
Rc1/8
50
Relief port:
170
G1/2 (V64H), G1 (V68H)
232
–20°C to +80°C
256#
Consult our Technical Service for use
below +2°C
35
221#
Relief pressure adjustment range: G 1/2
1 ... 10 bar
airline (frl)
157 (G 3/4) 190***

105
ø 33 (G 3/4)
54
58
74
G1
*** For 1 1/4 and 1 1/2 ported yokes add 10 mm
# Minimum clearance required to remove unit from yoke

V64H series Wall Tamper Gauge Silencer 3/2 Silencer
Model Port mounting resistant 0 … 10 bar (relief valve) shut-off (shut-off
size bracket kit valve valve)
5
V64H-2GD-RMN G1/4 74504-50 1581-90 18-013-013 MB004B T64T-2GB-P1N T40B1800 V64H-KIT
V68H series Wall Tamper Gauge Silencer 3/2 Silencer

Model Port mounting resistant 0 … 10 bar (relief valve) shut-off (shut-off
size bracket kit valve valve)
V68H-6GD-RMN G3/4 18-001-979 1581-90 18-013-013 MB008B T68H-6GB-B2N T40B2800 V68H-KIT

V68H-8GD-RMN G1 18-001-979 1581-90 18-013-013 MB008B T68H-8GB-B2N T40B2800 V68H-KIT


store.norgren.com
Miniature units, general purpose

Combination filter/regulators and lubricators
P1H – G1/8, G1/4
Combinations of filter-regulators
and lubricators can be ordered as
pre-assembled units
Complete control of filtration, regulation and
lubrication at a single point
Micro-fog versions for most general purpose
Technical data
Medium:
Compressed air only
10 bar
–20°C to +50°C
Pressure range:
68
0,3 ... 7 bar

10
42
28
airline (frl)
211 #
78
94
98
1/8 inch
Express Links
Shut-off valves.
~ 90
See page 280
5
38
~ 54
38
Models Accessories
P1H Series Neck mounting Gauge
Auto drain Manual drain Port bracket 0 … 10 bar
Model Model size
P1H-100-A3QG P1H-100-M3QG G1/8 18-025-003 18-013-989

P1H-200-A3QG P1H-200-M3QG G1/4 18-025-003 18-013-989


Filter
F07 – G1/8, G1/4
Direct ported filters with high water
removal efficiency
Automatic drains supplied as standard
High flow miniature unit
Transparent bowl for 360° visibility
Technical data
Medium:
Compressed air only
10 bar
–34°C to +50°C
Manual drain Auto drain
10
10
158 #
154 #
104
108
airline (frl)
1/8 inch
(42)
23 19
23
37
5
Models Accessories
f07 Series Wall mounting Auto Manual
Auto drain Manual drain Port Flow* bracket drain drain
F07-100-A3TG F07-100-M3TG G1/8 9 5939-06 F07-KITA40 F07-KITM40

F07-200-A3TG F07-200-M3TG G1/4 11,5 5939-06 F07-KITA40 F07-KITM40
* Typical flow with 6,3 bar inlet pressure and 0,5 bar pressure drop


store.norgren.com

Pressure regulator
R07 – G1/8, G1/4
Ported regulators for general purpose
Relieving operation as standard
Non-rising adjusting knob with snap-action lock
Technical data
Medium:
Compressed air only
20 bar
Gauge ports:
Rc1/8
ø 28
–34°C to +65°C
Pressure range:
64
0,3 ... 7 bar

75
24
airline (frl)
(42)
19 23
38
~ 54
40

5
GrSym,Reg,Rel
r07 series Neck Mounting Mounting Gauge
Port Outlet Flow* mounting nut only nut only
Model size pressure range (dm3/s) bracket (incl. nut) plastic metal
R07-100-RNKG G1/8 0,3 to 7 bar 6,5 18-025-003 2962-89 2962-04 18-013-989 R07-KITR
R07-200-RNKG G1/8 0,3 to 7 bar 6,5 18-025-003 2962-89 2962-04 18-013-989 R07-KITR
R07-105-RNMG G1/4 0,5 to 10 bar 7 18-025-003 2962-89 2962-04 18-013-989 R07-KITR
R07-205-RNMG G1/4 0,5 to 10 bar 7 18-025-003 2962-89 2962-04 18-013-989 R07-KITR
* Typical flow with 10 bar inlet pressure, 6,3 bar set pressure and 1 bar drop from set


Filter regulator
B07 – G1/8, G1/4
Manual drain Auto drain
Filter-regulators for all general purpose
pneumatic applications ø 28 ø 28
High performance design provides high flow

with minimum pressure drop
68
68
28
28
Technical data
164
160
214 #
210 #
Medium:
Compressed air only
10 bar
1/8 inch
Gauge ports:
Rc1/8
41
Pressure range:
0,3...7 bar
38
–34°C to +50°C
~ 54
airline (frl)
ø 38

GrSym,F/R,Auto,Rel
b07 series Neck Mounting Mounting Gauge Auto Manual
5 Auto drain
Model
Manual drain
Model
Port Flow*
size (dm3/s)
mounting nut only nut only
bracket (incl. nut) plastic metal
drain drain
B07-101-A3KG B07-101-M3KG G 1/8 6,2 18-025-003 2962-89 2962-04 18-013-989 B07-KITA40R B07-KITM40R
B07-201-A3KG B07-201-M3KG G 1/4 6,5 18-025-003 2962-89 2962-04 18-013-989 B07-KITA40R B07-KITM40R
* Typical flow with 10 bar inlet pressure, 6,3 bar set pressure and 1 bar drop


store.norgren.com

Lubricators
L07 – G1/8, G1/4
Micro-fog lubricators provide a fine mist for
most general purpose pneumatic applications
42
42 42
10
42
10 10
Technical data
10
120
Medium:
183 #
183 #193 #
120130
193 #
Compressed air only
130
10 bar
1/8 inch
Start point:
1/8 inch 0,24 dm3/s
41 Minimum flow required for lubricator operation
at 6,3 bar inlet pressure
41
37
–20°C to +50°C
37
airline (frl)
Symbol 8.10
l07 series Neck

Model
Port Flow*
size (dm3/s)
mounting
bracket
5
L07-100-MPQG G1/8 5 18-025-003 L07-KIT
L07-200-MPQG G1/4 6,7 18-025-003 L07-KIT


Pressure relief valve – Diaphragm type
V07 – G1/8, G1/4
Protect compressed air systems
from over-pressurisation
Norgren pressure relief valves comply with category O(S.E.P.)
and category 1 of the Pressure Equipment Directive 97/23/EC.
Technical data
Medium:
Compressed air only
Gauge ports:
Rc1/8
Relief port:
As inlet port
Pressure range:
0,3...9bar
Ambient temperature: ø 28
–34°C to +65°C
Relief pressure adjustment range:
75
68
0,3 ... 9 bar
24
airline (frl)
(42)
23 19
38
5
V07 series Neck Gauge
Port mounting
Model size bracket
GrSym,RelVlv
V07-100-NNLG G1/8 18-025-003 18-013-989 V07-KIT

V07-200-NNLG G1/4 18-025-003 18-013-989 V07-KIT


store.norgren.com
Mainline general purpose units

General purpose filters
F18 – G1/2 and 2
Direct ported filter with high water
removal efficiency
High flow with minimal pressure drop
Highly visible prismatic liquid level
indicator lens
Two gauge ports on top of the body for
installation of pressure gauges
Can be dissasembled without removal from
the airline
Technical data
Fluid:
Compressed air
Manual drain Auto drain Maximum pressure:
17 bar
47
Operating temperature:
–20° … +80°C
Particle removal:
5 or 40 µm
399
384
airline (frl)
599 #
584 #
G 1/8
209
5
207

F18 Element
Port Flow* Element
Model size (dm3/s) Size Drain Bowl
F18-B00-A1DG G1 1/2 765 5 µm Auto Metal 5882-97 F18-100A

F18-B00-A3DG G1 1/2 765 40 µm Auto Metal 5882-98 F18-100A
F18-C00-A1DG G2 765 5 µm Auto Metal 5882-97 F18-100A
F18-C00-A3DG G2 765 40 µm Auto Metal 5882-98 F18-100A
*Typical flow with a 40 µm element at 6,3 bar inlet pressure and 0,5 bar pressure drop

mainline pilot operated regulators
R18 Series
1 1/2 and 2”
The R18 remote pilot operated regulator can
be installed at any point in the compressed
air system without regard to accessibility
– pilot regulator can be installed in the most
convenient location
The R18 with conventional integral pilot enables
easy pressure adjustment at the regulator
Balanced valve minimises effect of changes in
inlet pressure on outlet pressure
Constant bleed feature in pilot regulator
provides quick response and minimum
dead-band
247
Exceptionally high relief flow 1
Technical data
184
91
Fluid:
Compressed air
91
3/4 inch
Inlet pressure range:

0,7 to 31 bar 152
1 – Gauge port
152
Operating temperature:
–18° to +80°C
70
airline (frl)
140
140
80
Symbol 8.17 ø 51

r18 remote pilot
Model Port Flow* Outlet Operation Adjustment Exhaust Gauge Gauge
size (dm3/s) pressure method silencer adaptor

5
Symbol 8.17
R18-B00-RNXG G1 1/2 950 dm³/s 0,16 … 17 Relieving Remote pilot MB006B 150232818 18-013-014 R18-100R
R18-C00-RNXG G2 950 dm³/s 0,16 … 17 Relieving Remote pilot MB006B 150232818 18-013-014 R18-100R
r18 integral pilot

Model Port Flow* Outlet Operation Adjustment Exhaust Gauge Gauge
size (dm3/s) pressure method silencer adaptor

R18-B05-RNLG G1 1/2 950 dm³/s 0,3 … 8,5 Relieving Integral pilot MB006B 150232818 18-013-014 5945-40
R18-C05-RNLG G2 950 dm³/s 0,3 … 8,5 Relieving Integral pilot MB006B 150232818 18-013-014 5945-40
* Max. flow with 7 bar inlet pressure. 6,3 bar outlet pressure ans a droop of 1 bar from set
Alternative models available – contact Norgren technical service Express Links
For details of...
recommended remote pilot
regulators
See page 219


store.norgren.com
General purpose stainless steel

Regulators and filter-regulator
R05, B05 – 1/4” PTF
ø 24
Metallic parts meet NACE* recommendations
Miniature high corrosion resistant design
Adjusting knob has snap-action lock
60
69
ø 30
Particularly suitable for marine, petro-chemical,
25
food processing, medical, dental and similar
applications
Panel mounting facility
38
* National Association of Corrosion Engineers - recognised oil-
field recommendation for resistance to sulphide stress cracking
common in well-head and other corrosive environments.
42
Technical data
Medium:
ø 24
Compressed air only
17 bar
60
ø 30
25
Gauge ports:
1/8” PTF
Pressure range:
105,5
130
0,3...8,6 bar
airline (frl)
–34°C to +66°C
38
42
Models
GrSym,F/R,Auto,Rel Accessories Service Kit
5
b05 series
Port Flow* Gauge** Mounting
Model size (dm3/s) nut
B05-233-M1LA 1/4 PTF 5 18-013-844 2962-89 B05-KITM05R
r05 series
Port Flow* Gauge** Mounting
Model size (dm3/s) nut
R05-200-RNLA 1/4 PTF 3 18-013-844 2962-89 R05-KITR

* Typical flow with 10 bar inlet pressure, 6,3 pressure and 1 bar drop from set ** Not NACE standard


Stainless steel general purpose
Filters, pressure regulators, lubricators
F22, R22, L22 – 1/2” NPTF
Lloyds Register Type Approved
Materials meet NACE* recommendations
(MR-0175, 2002 revision)
25 µm filter element as standard
Orientable metal bowls with sightglasses
* National Association of Corrosion Engineers – recognised oil-
common in well-head and other corrosive environments
Technical data
Medium:
Compressed air only
17 bar (F22, L22)
20 bar (R22)
Gauge ports:
1/4 PTF (R22)
Pressure range:
R22:0,4...10 bar
Operation:
airline (frl)
R22: Relieving
L22: Oil-fog
Start Point:
L22: 1,7 dm3/sat 6,3 bar
–20°C … +80°C
F22 Auto Drain F22 Manual Drain L22 R22

5 45
17
17
ø42
216
186
81
180
250
259
250
189
1/4 N.P.T 89
90
90 90
58
34
76
34
2 – Gauge port
76
76
34
34


store.norgren.com
Stainless steel general purpose Filters, pressure regulators, lubricators

F22, R22, L22 – 1/2” NPTF

f22 series Wall Auto Manual
Auto drain Manual drain Port Flow* mounting drain drain
Model Model size (dm3/s) bracket
F22-400-A7DA F22-400-M7DA 1/2 PTF 57 18-001-962 F22-KITA25 F22-KITM25
* Typical flow with 10 bar inlet pressure, 6,3 bar pressure and 0,5 bar pressure drop
r22 series Neck Gauge** Wall Auto

Auto drain Port Flow* mounting mounting drain
Model size (dm3/s) bracket bracket
Symbol 8.15
R22-401-RNMA 1/2 PTF 50 18-001-959 18-013-909 18-001-962 R22-KITR
* Typical flow with 10 bar inlet pressure, 6,3 bar set pressure and 1 bar drop from set **Not to NACE standard
Symbol 8.10
airline (frl)
l22 series Wall
Auto drain Port Flow* mounting
Model size (dm3/s) bracket
L22-400-OP8A 1/2 PTF 48 18-001-962

L22-KIT
* Typical flow with 10 bar inlet pressure, 6,3 bar pressure and 0,5 bar pressure drop
5
Express plus
Air preparation units not fixed with brackets
can move and cause leaks, wasting costly air.
Always fit a mounting bracket.

Stainless steel general purpose
Filter/regulator
B38
Designed for use in corrosive enviroments
Metallic parts meet NACE Standard MR-01-75*
Lloyd’s register type approval
Applications include marine enviroments, oil and
gas production, chemical and food processing,
medical analysis
Relieving or non relieving models. Relieving
models allow reduction of outlet pressure even
when the system is dead-ended
* National Association of Corrosion Engineers – recognised oil-
common in well-head and other corrosive environments
Technical data
13
Medium:
Compressed air only
115
17 bar (autodrain)
31 bar (manual drain)
53
Flow:
237
200
airline (frl)
50 dm3/s
Typical flow with 12 bar inlet pressure, 8 bar set pressure and
1 bar droop from set
Gauge ports:
1/4” PTF 64
Relief port:
1/8” PTF
75
64
–40°C … +80°C
Particle removal:
5 5 μm or 25 μm filter element
Models GrSym,F/R,Auto,Rel Accessories

b38 series Neck mounting Panel Gauge Plastic
Model Port Outlet Flow* Operation Drain Element bracket & nut nut – adjusting
size pressure range (dm3/s) only knob
B38-444-M1LA 1/2 PFT 0,3 … 9 bar 50 Relieving Manual 5 µm 18-001-973 5988-02 18-013-909 74630-04
B38-444-M2LA 1/2 PFT 0,3 … 9 bar 50 Relieving Manual 25 µm 18-001-973 5988-02 18-013-909 74630-04
B38-444-A1LA 1/2 PFT 0,3 … 9 bar 50 Relieving Automatic 5 µm 18-001-973 5988-02 18-013-909 74630-04
B38-444-A2LA 1/2 PFT 0,3 … 9 bar 50 Relieving Automatic 25 µm 18-001-973 5988-02 18-013-909 74630-04
* Typical flow with 12 bar inlet pressure, 8 bar set pressure and 1 bar droop from set


store.norgren.com
Stainless steel precision

Filter/regulator
R38, B38
Exceptionally high flow and relief flow
characteristics
Easy to adjust even at high output pressures
Balanced valve minimises effect of variations in
Relieving feature allows outlet pressure
13 reduction even when the system is dead ended
Full flow gauge ports
Technical data
115
53
Δ 42
Medium:
285
Compressed air
248
145

30
53
20 bar *
Gauge ports:
G1/4 with 1/4 main, G3/8 with 3/8 main,
64 G1/2 with all others
32
1/4 NPT
Pressure range:
64
airline (frl)
0,7...8 bar
75
64
-40°C … +80°C
75
64
13
Models Accessories
r38 series precision pressure regulator Neck mounting Gauge Plastic
Model Port Outlet pressure Flow* Operation bracket & nut adjusting
size range (dm3/s) knob
Symbol 8.15
R38-240-RNCA
R38-240-RNFA
1/4 PFT 0,04 … 2 bar
1/4 PFT 0,07 … 4 bar
8
8
Relieving
Relieving
18-001-973 18-013-913 74630-04
18-001-973 18-013-913 74630-04
5
R38-240-RNMA 1/4 PFT 0,50 … 10 bar 8 Relieving 18-001-973 18-013-909 74630-04
GrSym,F/R,Auto,Rel
b38 series precision filter/regulator Neck mounting Gauge Plastic
Model Port Outlet pressure Flow* Operation Drain Element bracket & nut adjusting
size range (dm3/s) knob
B38-244-B1KA 1/4 PFT 0,25 … 7 bar 8 Relieving Manual 5 µm 18-001-973 18-013-909 74630-04
B38-244-B2KA 1/4 PFT 0,25 … 7 bar 8 Relieving Manual 25 µm 18-001-973 18-013-909 74630-04
B38-244-A1KA 1/4 PFT 0,25 … 7 bar 8 Relieving Automatic 5 µm 18-001-973 18-013-909 74630-04
B38-244-A2KA 1/4 PFT 0,25 … 7 bar 8 Relieving Automatic 25 µm 18-001-973 18-013-909 74630-04
B38-244-B1MA 1/4 PFT 0,5 … 10 bar 8 Relieving Manual 5 µm 18-001-973 18-013-909 74630-04
B38-244-B2MA 1/4 PFT 0,5 … 10 bar 8 Relieving Manual 25 µm 18-001-973 18-013-909 74630-04
B38-244-A1MA 1/4 PFT 0,5 … 10 bar 8 Relieving Automatic 5 µm 18-001-973 18-013-909 74630-04
B38-244-A2MA 1/4 PFT 0,5 … 10 bar 8 Relieving Automatic 25 µm 18-001-973 18-013-909 74630-04
* Typical flow with 7 bar inlet pressure, 1 bar set pressure and 0,05 bar droop from set

special purpose
High flow pressure regulator
20AG – G1/2, G1
Ported regulators for general purpose

Relieving operation as standard, optional non-
relieving
Options include non-relieving models and
alternative spring ranges
B
Technical data
Medium:
Compressed air only
C
Maximum inlet pressure: D
28 bar max.
Gauge ports:
G1/8
E
F
–20°C … +80°C
Materialen Dimensions
airline (frl)
Body and bonnet: zinc alloy Series B (max.) C D E F

Bottom plug: brass 20AG-X4G 125 35 85 85 125
20AG-X6G 185 40 115 125 160
Adjusting screw: steel plated 20AG-X8G 185 40 115 125 160
Elastomers: synthetic rubber

20AG Series
Port Outlet Flow* Operation Adjustment Mounting Bracket Gauge
Model
size pressure (dm3/s) method
range
5
Symbol 8.15
20AG-X4G/PD100 G 1/2 0,1 … 3,5 bar 60 Relieving T Bar Bracket 18-001-005 18-013-011 20AG-X4-100
20AG-X4G/PH100 G 1/2 0,2 … 8,0 bar 60 Relieving T Bar Bracket 18-001-005 18-013-013 20AG-X4-100
20AG-X4G/PH102 G 1/2 0,2 … 8,0 bar 60 Relieving Plastic Knob Bracket 18-001-005 18-013-013 20AG-X4-100
20AG-X4G/PH103 G 1/2 0,2 … 8,0 bar 60 Relieving T Bar Panel Mounting – 18-013-013 20AG-X4-100
20AG-X4G/PJ100 G 1/2 7 … 16 bar 60 Relieving T Bar Bracket 18-001-005 18-013-014 20AG-X4-100
20AG-X4G/PJ103 G 1/2 7 … 16 bar 60 Relieving T Bar Panel Mounting – 18-013-014 20AG-X4-100
20AG-4G/PD100 G 1/2 0,1 … 3,5 bar 60 Non-relieving T Bar Bracket 18-001-005 18-013-011 20AG-4-100
20AG-4G/PH100 G 1/2 0,2 … 8,0 bar 60 Non-relieving T Bar Bracket 18-001-005 18-013-013 20AG-4-100
20AG-4G/PJ100 G 1/2 7 … 16 bar 60 Non-relieving T Bar Bracket 18-001-005 18-013-014 20AG-4-100
20AG-X6G/PD100 G 3/4 0,1 … 3,5 bar 80 Relieving T Bar Bracket 18-001-029 18-013-011 20AG-X8-100
20AG-X6G/PH100 G 3/4 0,2 … 8,0 bar 80 Relieving T Bar Bracket 18-001-029 18-013-013 20AG-X8-100
20AG-6G/PH100 G 3/4 0,2 … 8,0 bar 80 Non-relieving T Bar Bracket 18-001-029 18-013-013 20AG-8-100
20AG-X8G/PD100 G 1 0,1 … 3,5 bar 100 Relieving T Bar Bracket 18-001-029 18-013-011 20AG-X8-100
20AG-X8G/PH100 G 1 0,2 … 8,0 bar 100 Relieving T Bar Bracket 18-001-029 18-013-013 20AG-X8-100
20AG-X8G/PH102 G 1 0,2 … 8,0 bar 100 Relieving Plastic Knob Bracket 18-001-029 18-013-013 20AG-X8-100
20AG-8G/PH100 G 1 0,2 … 8,0 bar 100 Non-relieving T Bar Bracket 18-001-029 18-013-013 20AG-8-100
* Typical flow with 7 bar inlet pressure, 4 bar set pressure and 1 bar droop from set


store.norgren.com
special purpose ‘Micro trol’

High flow, high relief pressure regulator
R24 – G1/4 … G1 1/4
Exceptionally high flow and relief flow
characteristics
Easy to adjust even at high output pressures
Balanced valve minimises effect of variations in
Panel mounted facility
Technical data
Medium:
Compressed air only
Manual Air Pilot 20 bar max.
ø 30 Ø30 0°C … +80°C
3 max

87
5 max
90
73
80
123
136
109
128
Materialen
53
53 Body and bonnet: zinc alloy
95
93 Bottom plug and adjusting
knob (manual): acetal resin
airline (frl)
69
69
67
69
Symbol 8.17

R24 series Neck Gauge Gauge
Model Port Outlet Flow* Operation Adjustment mounting adaptor
size pressure range (dm3/s) method bracket
R24-200-RNCG G1/4 0,3 … 2 bar – Relieving Manual - Knob 18-999-412 150232818 18-013-010 5292-52
5
R24-200-RNFG G1/4 0,3 … 4 bar – Relieving Manual - Knob 18-999-412 150232818 18-013-012 5292-52
R24-200-RNLG G1/4 0,7 … 8 bar – Relieving Manual - Knob 18-999-412 150232818 18-013-013 5292-52
R24-200-RNSG G1/4 0,7 … 17 bar – Relieving Manual - Knob 18-999-412 150232818 18-013-014 5292-52
R24-400-RNCG G1/2 0,3 … 2 bar – Relieving Manual - Knob 18-999-412 150234818 18-013-010 5292-52
R24-400-RNFG G1/2 0,3 … 4 bar – Relieving Manual - Knob 18-999-412 150234818 18-013-012 5292-52
R24-400-RNLG G1/2 0,7 … 8 bar 100 Relieving Manual - Knob 18-999-412 150234818 18-013-013 5292-52
R24-401-RNXG G1/2 0,3 … 17 bar – Relieving Air Pilot 18-999-412 150234818 18-013-014 5292-54
R24-601-RNXG G3/4 0,3 … 17 bar – Relieving Air Pilot 18-999-412 150234818 18-013-014 5292-55
R24-800-RNLG G1 0,7 … 8 bar 300 Relieving Manual - Knob 18-999-412 150234818 18-013-013 5292-53
R24-801-RNXG G1 0,3 … 17 bar – Relieving Air Pilot 18-999-412 150234818 18-013-014 5292-55
R24-A00-RNLG G1 1/4 0,7 … 8 bar – Relieving Manual - Knob 18-999-412 150234818 18-013-013 5292-53
R24-A01-RNXG G1 1/4 0,3 … 17 bar – Relieving Air Pilot 18-999-412 150234818 18-013-014 5292-55
* Typical flow with 10 bar inlet, 4 bar set pressure and 1 bar droop from set

11-808
special purpose
Pilot operated regulators
65
11-808, R18, 11-400/11-204
106
Can be installed at any point in the compressed
air system without regard to accessibility –
120
pilot regulator can be installed in the most
convenient location
Can be used wth conventional or feedback
pilot regulator
125
Feedback piot regulator senses downstream
pressure and automatically adjusts pilot
operated regulator outlet pressure
Technical data R18

Medium: 1
Compressed air
Inlet pressure range:
184
20 bar (11-808, 11-204), 25 bar (11-400), 31 bar (R18)
91
–20° … +80°C
152
materials
140
airline (frl)
Body: zinc alloy (11-808, 11-204), alluminium alloy (R18)

Bonnett: alluminium alloy (11-808, R18),
zinc alloy (11-204)
1 – Gauge port
Elastomers: nitrile (11-808, R18), synthetic rubber (11-204)
Symbol 8.17

11-808 series Wall Gauge
Port Flow* Outlet Operation mounting
Model size pressure range bracket
5 11-808-960 G3/4 180 dm³/s 20 bar Max. Relieving 18-001-027 18-013-014 11-908-100
11-808-980 G1 180 dm³/s 20 bar Max. Relieving 18-001-027 18-013-014 11-908-100
Symbol 8.17
* Max. flow with 8 bar inlet pressure, 6,3 bar outlet pressure and a droop of 1 bar from set
R18 series Exhaust Gauge Gauge

Port Flow* Outlet Operation silencer adaptor
Model size pressure range
R18-B00-RNXG G1 1/2 950 dm³/s 0,16 … 17 Relieving MB006B 150232818 18-013-014 R18-100R
R18-C00-RNXG G2 950 dm³/s 0,16 … 17 Relieving MB006B 150232818 18-013-014 R18-100R
* Max. flow with 7 bar inlet pressure. 6,3 bar outlet pressure ans a droop of 1 bar from set
Pilot method – Convensional or Feedback see diagrams


store.norgren.com
Special purpose Pilot operated regulators

Conventional pilot Feedback pilot 11-808, R18, 11-400/11-204
Supply Conventional pilot Feedback pilot
Supply Feedback
air regulator regulator ‘sensing’ line
air
Pilot output line

Pilot output line
Supply Supply
air Pilot operated Pilot operated
regulator
air Feedback pilot regulators give more
regulator
sensitive control and quicker reaction to
downstream pressure changes.
Outlet Outlet air
Feedback ‘sensing’ line to be kept to
air miniumum length (<200mm).
ø 63
179
80
83
airline (frl)
Model – Conventional Pilot Regulators Accessories Service Kit
11-400, 20al series Bracket Gauge
Port Outlet Operation Mounting
Model size pressure range option
11400-2G/PC100
11400-2G/PC103
11400-2G/PE100
G1/4
G1/4
G1/4
0,06 … 2
0,06 … 2
0,06 … 4
Relieving
Relieving
Relieving
Bracket
Panel
Bracket
18-001-005
–
18-001-005
18-013-010 11400-100
18-013-010 11400-100
18-013-011 11400-100
5
11400-2G/PE103 G1/4 0,06 … 4 Relieving Panel – 18-013-011 11400-100
11400-2G/PG100 G1/4 0,16 … 7 Relieving Bracket 18-001-005 18-013-012 11400-100
11400-2G/PG103 G1/4 0,16 … 7 Relieving Panel – 18-013-012 11400-100
20AL-X2G/PK100 G1/4 7 … 20 Relieving Bracket 18-001-005 18-013-014 11400-100
Model – Feedback Pilot Regulators Accessories Service Kit

11-204 series Bracket Gauge
Port Outlet Operation Mounting
Model size pressure range option
11-204-004 G1/4 0,16 … 7 Relieving Panel/Bracket 18-001-005 18-013-012 11-204-100

11-204-006 G1/4 4 … 17 Relieving Panel/Bracket 18-001-005 18-013-014 11-204-100

precision instrument
Pressure regulator
11-818, R27
11-818
Precision instruments with integral pilot to
ensure very close pressure control in a
compact form
Unit double filters air before reaching pilot valve
to help prevent leakage and malfunction
* Not recommended for dead-end applications
R27
High precision regulator using a control
chamber instead of a spring, so increasing its
sensitivity to any variations and eliminating any
spring hysteresis
43
Perfect for dead-end applications 11-818 R27
Excellent long term stability 43
2,5 max.*
Technical data
2,5 max.*
ø 12,5
Medium:
44
127
11-818 - Compressed air, R27 – dry, ø 12,5

63
oil free air filter to 25µm

127

63
airline (frl)
11-818 Low pressure: 8 bar

68
15
11-818 Standard pressure: 10 bar

11-818 High pressure: 14 bar
15
14
54
R27: 10 bar (minimum 0,2 above output) 54
Ambient temperature: 54
11-818: 0 … +70°C
27
R27: –20 … +70°C

54
27
54

5 11-818 Series Port Outlet pressure

11-818-999
size range (bar)
G1/4 0,02 … 0,50 (low)
Flow* Accuracy # Operation Gauge
(dm³/s) (bar)
0,01
Ports
Relieving -
Tamper proof
adjusting screw
-
Panel
mounting nut
3081-01 2787-96
11-818-998 G1/4 0,02 … 0,50 (low) 0,01 Relieving - Tamper proof 3081-01 2787-96
11-818-100 G1/4 0,07 … 4 (Standard) 8,0 0,03 Relieving - - 3081-01 2787-98
11-818-101 G1/4 0,07 … 4 (Standard) 8,0 0,03 Relieving - Tamper proof 3081-01 2787-98
11-818-110 G1/4 0,04 … 10 (high) 0,05 Relieving - - 3081-01 2787-97
11-818-987 G1/4 0,02 … 0,50 (low) 0,01 Relieving R1/4 - 3081-01 2787-96
11-818-993 G1/4 0,07 … 4 (Standard) 8,0 0,03 Relieving R1/4 - 3081-01 2787-98
11-818-991 G1/4 0,04 … 10 (high) 0,05 Relieving G1/4 - 3081-01 2787-97
* Typical flow with 8 bar inlet pressure, 4 bar set pressure and 0.005 bar droop from set. # Typical mid range variance from set pressure with 7 bar inlet at 2 dm³/s flow
Note: 11-818 is not a constant bleed device, when being used under flow conditions no air is consumed. Air bleed is only effective under zero flow conditions as in a dead end application.
R27 Series Port Outlet pressure Flow* Hysteresis/ Sensitivity Operation Gauge
size range (bar) (dm³/s) repeatability# Ports
R27-200-RNCG G1/4 0,14 … 2,0 bar 8,0 < 0,05% > 0,3 mbar Relieving G1/4
R27-200-RNFG G1/4 0,14 … 4,0 bar 8,0 < 0,05% > 0,3 mbar Relieving G1/4
R27-200-RNLG G1/4 0,14 … 8,0 bar 8,0 < 0,05% > 0,3 mbar Relieving G1/4
* Maximum flow achieved under ideal conditions # Typical values at mid range
Note – R27 reglators are designed as constant bleed devices and consume air, typically less than 0.016dm³/s


store.norgren.com
air preparation accessories

Gauges, Auto-drain, Drip leg drain
gauges
Monitor pressures in a compressed air system
for optimum efficiency
Choice of pressure ranges 9,5 max
5
Direct or panel mounted
ø 40 ø 50 & 63
28 (23)
70 (56)
49 (62)
R 1/8
R 1/8
3,6
40 44
50 (63) 48 51
61
50 (40)
12,7 (10)
R 1/8 (G1/8A)
Centre back Bottom Panel mounting 59

30
Standard Pressure Nominal Connection Port Standard Pressure Nominal Connection Port
Steel and range diameter type / connection Steel and range diameter type / connection
plastic (bar) (mm) mounting plastic (bar) (mm) mounting
18-013-887 0 … 1 40 Centre Back R1/8 18-013-879 0 … 1,6 40 Panel Mounted G1/8A
18-013-991 0 … 1,6 40 Centre Back R1/8 18-013-878 0 … 6 40 Panel Mounted G1/8A
18-013-990 0 … 4 40 Centre Back R1/8 18-013-858 0 … 6 50 Panel Mounted G1/8A
18-013-885 0 … 6 40 Centre Back R1/8 18-013-857 0 … 10 50 Panel Mounted G1/8A
18-013-989 0 … 10
airline (frl)
40 Centre Back R1/8
18-013-883 0 … 1,6 63 Panel Mounted G1/4A
18-013-884 0 … 16 40 Centre Back R1/8
18-013-882 0 … 6 63 Panel Mounted G1/4A
18-013-908 0 … 25 40 Centre Back R1/8
18-013-852 0 … 10 63 Panel Mounted G1/4A
18-013-011 0 … 4 50 Centre Back R1/8
18-013-024 0 … 1,6 50 Bottom R1/8
18-013-012 0 … 6 50 Centre Back R1/8
18-013-025 0 … 4 50 Bottom R1/8
18-013-013 0 … 10 50 Centre Back R1/8
18-013-026 0 … 6 50 Bottom R1/8
18-013-014 0 … 25 50 Centre Back R1/8
18-013-027 0 … 10 50 Bottom R1/8
18-013-893 0 … 1 63 Centre Back R1/8 18-013-028 0 … 25 50 Bottom R1/8
18-013-892 0 … 2,5 63 Centre Back R1/8
18-013-854 0 … 10 63 Bottom G1/4A
18-013-891 0 … 6 63 Centre Back R1/8
18-013-853 0 … 25 63 Bottom G1/4A
18-013-856 0 … 10 63 Centre Back R1/8
18-013-855 0 … 16 63 Centre Back R1/8
18-013-888 0 … 25 63 Centre Back R1/8
Stainless
Steel

Pressure Nominal
range
(bar)
diameter
(mm)
Connection
type /
mounting
Port
connection
5
18-013-844 0 … 10 40 Centre Back 1/8 NPT
18-013-913 0 … 6 40 Centre Back 1/4 NPT
28 18-013-909 0 … 10 40 Centre Back 1/4 NPT
18-013-905 0 … 25 40 Centre Back 1/4 NPT
drip leg drain auto-drain

170
154
Fully automatic unit that can Spare parts for filters

drain liquid from low points in and filter/regulators
compressed air systems Model Series
G 1/8
Model Port Bowl 4000-50R Excelon 72, Excelon Pro
size 4000-51R Excelon 73
17-816-998 G1/2 Metal 3000-97 Excelon 74
59
17-816-999 G1/2 Transparent 6000-50 Olympian 64, 68

G1/2


Classic Range
micro-fog lubricator
S3406-3S
For use with small air operated devices having

a maximum air requirement of 170 litres/min
at 5,5 bar or for machine bearing lubrication
applications

Technical data
Port size:
3/8 BSPT
Oil reservoir capacity:
1 litre
Maximum pressure:
10,5 bar
Maximum temperature:
CLassic airline (frl)
86
50°C
49
Bearing inch rating:
32 Maximum
246
197
Performance – As a machine bearing lubricator
Bearing Inches Pressure Setting Air Consumption
(bar) (litres/min)
8 0,56 33
16 0,56 … 0,9 33 … 42
129
119
24 0,7 … 1,4 37 … 54
32 1,2 … 1,7 51 … 61
Models Accessories
5
Order No. Port Capacity Mounting Bracket
size

S3406-3S/P315100 G3/8 1 litre 18-001-015
Note. For machine bearing lubricator applications these lubricators are

recommended as replacements only products


Airline Norgren PDF

Uploaded by

Copyright:

Available Formats

Airline Norgren PDF

Uploaded by

Document Information

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

Airline Norgren PDF

Uploaded by

Copyright:

Available Formats

EXCELON® PRO Series

Combination shut off valve, filter/regulator and lubricator

BL92-F11D BL92-F31D 8 mm BL92-F15D BL92-F35D 8 mm

PDF CAD For further information

174 store.norgren.com NORGREN EXPRESS – Orders

excelon® pro series Patented Connection System

Easy ordering – 24/7 store.norgren.com 175

F92G-8DN-AT1 F92G-8DN-QT1 Ø 8 mm 19 dm3/s (1140 l/min) F92G-KIT 4000-50R

PDF CAD For further information

176 store.norgren.com NORGREN EXPRESS – Delivery

EXCELON® PRO SERIEs Coalescing filter

F92C-8DD-AT1 Ø 8 mm 4,6 dm3/s (276 l/min) F92C-KIT 4000-50R

For further information PDF CAD

Rapid delivery – order today store.norgren.com 177

Outlet pressure adjustment range:

Models Service Kit

R92G-8DK-RMG Ø 8 mm 22 dm3/s (1320 l/min) R92G-KITR

PDF CAD For further information

178 store.norgren.com NORGREN EXPRESS – Service

EXCELON® PRO SERIEs Filter/regulator

B92G-8DK-AT1-RMG B92G-8DK-QT1-RMG Ø 8 mm 16 dm3/s (960 l/min) B92G-KITR 4000-50R

For further information PDF CAD

Can’t find it – call the Express Team store.norgren.com 179

Have you thought about...

Models Symbol 8.10

L92C-8DP-ETN Ø 8 mm 24 dm3/s (1440 l/min) L92C-KIT

PDF CAD For further information

180 store.norgren.com NORGREN EXPRESS – Orders

Excelon modular system

Maximum inlet pressure:

Consult our Technical Service for use below +2°C

0,3 ... 10 bar

*BL72, **BL73, ***BL74

BL72-205GA BL72-225G G3/8 T 4255-51 – 5925-02

For further information PDF CAD

Easy ordering – 24/7 store.norgren.com 181

Excelon design allows in-line installation

Have you thought about...

Minimise wear and avoid damaging your

# Minimum clearance required to remove bowl

PDF CAD For further information

182 store.norgren.com NORGREN EXPRESS – Delivery

Excelon modular system General purpose filters

Models Accessories Service Kit

F72G-2GN-AL3 F72G-2GN-QT3 G1/4 30 T 4224-50 F72G-KITA40 F72G-KITM40

F73g series Wall mounting Auto Manual

F73G-2GN-AT3 F73G-2GN-QT3 G1/4 29 T 4424-50 F73G-KITA40 F73G-KITM40

F74g series Wall mounting Auto Manual

Rapid delivery – order today store.norgren.com 183

F72C, F73C, F74C, F74H – G1/4 to G3/4

# Minimum clearance required to remove bowl

PDF CAD For further information

184 store.norgren.com NORGREN EXPRESS – Service

Excelon modular system ‘Puraire’® oil removal filters

Models Accessories Service Kit

F72C-2GD-AL0 F72C-2GD-QT0 G1/4 4,5 T 4224-50 F72C-KITA0C

F73c series Wall mounting

F73C-2GD-AT0 F73C-2GD-QT0 G1/4 10 T 4424-50 F73C-KITA0C

F74c series Wall mounting

BL72, BL73, BL74