Scribd Logo
Upload

Welcome to Scribd!

  • 41 views

    Design Pull Rod

    Uploaded by

    SACHIN
    The document details the design of a pull rod with a 25mm diameter made of material that has a yield strength of 830MPa, modulus of elasticity of 200000MPa, and Poisson's ratio of 0.3. Calculations show the rod has a cross-sectional area of 490.87mm2 and can withstand a maximum tensile load of 30.77 metric tons resulting in a tensile stress of 615.01MPa, which is below the allowable tensile strength.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Design Pull Rod

    Uploaded by

    SACHIN
    41 views1 page
    The document details the design of a pull rod with a 25mm diameter made of material that has a yield strength of 830MPa, modulus of elasticity of 200000MPa, and Poisson's ratio of 0.3. Calculations show the rod has a cross-sectional area of 490.87mm2 and can withstand a maximum tensile load of 30.77 metric tons resulting in a tensile stress of 615.01MPa, which is below the allowable tensile strength.

    Original Description:

    Pull Rod

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document details the design of a pull rod with a 25mm diameter made of material that has a yield strength of 830MPa, modulus of elasticity of 200000MPa, and Poisson's ratio of 0.3. Calculations show the rod has a cross-sectional area of 490.87mm2 and can withstand a maximum tensile load of 30.77 metric tons resulting in a tensile stress of 615.01MPa, which is below the allowable tensile strength.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    41 views1 page

    Design Pull Rod

    Uploaded by

    SACHIN
    The document details the design of a pull rod with a 25mm diameter made of material that has a yield strength of 830MPa, modulus of elasticity of 200000MPa, and Poisson's ratio of 0.3. Calculations show the rod has a cross-sectional area of 490.87mm2 and can withstand a maximum tensile load of 30.77 metric tons resulting in a tensile stress of 615.01MPa, which is below the allowable tensile strength.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    Design of Pull Rod

    Diameter of Tie Rod : 25 mm


    Yield Strength of Rod : 830 MPa
    Modulus of Elasticity : 200000 MPa
    Poission's Ratio : 0.3

    Design Capacity

    C/S area of the Rod : 490.87 mm²


    : 407.43 kN
    Alloawable Tensile Strength
    : 41.53 MT
    Maximum Tensile Load (From STAAD Output) : 30.77 MT
    Tensile Stress on Rod : 615.01 MPa

    You might also like