Aveva E3d Pipe Router Chapter 1

Download as pdf or txt
Download as pdf or txt
You are on page 1of 4

CHAPTER 1

1 Introduction

AVEVA Everything3D™ (AVEVA E3D™) Pipe Router is a rule-based tool which enables the routing of pipe
networks by automatically positioning piping components.

Before using Pipe Router the pipes must be created, and their Heads and Tails connect or positioned. Pipe
Router begins routing from the head of a pipe and ends the route at the tail. The flow direction is always
forwards (from Head to Tail).

Pipe Router will automatically:

 Create clash-free orthogonal routes which use the minimum length of pipe and as few elbows and bends
as possible. The user can include non-orthogonal sections of pipe manually.

 Add elbows, reducers, flanges, gaskets and welds, providing they are available in the catalogue.

 Position piping components such as valves.

1.1 Aim

The aim of this training guide is to provide designers with the knowledge and skills necessary to use Pipe
Router to create simple pipe routes using simple rules.

1.2 Objectives

 Create a simple pipe route

 Use Routing Points to control the pipe route

 Route pipes along Routing Planes and Pipe Racks

 Create and use simple Routing Rules

© Copyright 2014. 7 www.aveva.com


AVEVA Solutions Limited and its subsidiaries.
All rights reserved.
AVEVA Everything3D™ (2.1)
Pipe Router TM-1850

1.3 Prerequisites

It is expected that trainees will have completed the TM – 1801 AVEVA Everything3D Foundations and TM –
1810 AVEVA Everything3D Pipework Modelling training courses. Trainees who can demonstrate a suitable
understanding of other AVEVA E3D applications and techniques may also be permitted to undertake the
training.

1.4 Course Structure

Training will consist of oral and visual presentations, demonstrations, worked examples and set exercises.
Each workstation will have a training project populated with model objects. This will be used by the trainees
to practice their methods and complete the set exercises.

1.5 Using this Guide

Certain text styles are used to indicate special situations throughout this document.

Button clicks are indicated by bold turquoise text.

Information the user has to enter will be bold red text.

Where supplementary information is provided, or reference is made to other documentation, the following
symbols and styles will be used.

 Additional information

 Refer to other documentation

System prompts will be bold, italic and in inverted commas i.e. 'Choose function'.

Example files or inputs will be in the courier new font.

© Copyright 2014 8 www.aveva.com


AVEVA Solutions Limited and its subsidiaries.
All rights reserved.
AVEVA Everything3D™ (2.1)
Pipe Router TM-1850

1.6 Setting Up the Training Course

Login to AVEVA E3D using the details provided by the Trainer. They will typically be as shown below:

Project: Training

Username: A.PIPER

Password: A

MDB: A-PIPING

Click the Model tile.

On the TOOLS tab, in the Training group, click the Setup button to display the
Training Setup form.

From the Piping tab select the Router radio button to indicate the current training course and check the
Setup Training Course checkbox. Click the Apply button followed by the Close button to close the form.

 Completed Exercises are available via the Training Setup form and may be accessed by the Trainer
if required.

© Copyright 2014 9 www.aveva.com


AVEVA Solutions Limited and its subsidiaries.
All rights reserved.
AVEVA Everything3D™ (2.1)
Pipe Router TM-1850

This page has been intentionally left blank.

© Copyright 2014 10 www.aveva.com


AVEVA Solutions Limited and its subsidiaries.
All rights reserved.

You might also like