Scribd Logo
Upload

Welcome to Scribd!

  • 57 views

    Isis Config

    Uploaded by

    Praveen Singh Bhadoriya
    The document describes configurations on multiple devices (CE1, CE2, CE3) to set up VLANs, routing protocols (IS-IS, BGP, OSPF), and virtual systems (VS). Key steps include: 1. Configuring VLANs, IP addresses, and interfaces on CE devices 2. Enabling IS-IS on VLAN interfaces for routing between CE devices 3. Configuring BGP and iBGP between CE routers to exchange routes 4. Creating virtual systems VS1 and VS2 on a switch and assigning interfaces for isolation

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd

    Isis Config

    Uploaded by

    Praveen Singh Bhadoriya
    57 views5 pages
    The document describes configurations on multiple devices (CE1, CE2, CE3) to set up VLANs, routing protocols (IS-IS, BGP, OSPF), and virtual systems (VS). Key steps include: 1. Configuring VLANs, IP addresses, and interfaces on CE devices 2. Enabling IS-IS on VLAN interfaces for routing between CE devices 3. Configuring BGP and iBGP between CE routers to exchange routes 4. Creating virtual systems VS1 and VS2 on a switch and assigning interfaces for isolation

    Original Description:

    isis config

    Copyright

    © © All Rights Reserved

    Available Formats

    TXT, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document describes configurations on multiple devices (CE1, CE2, CE3) to set up VLANs, routing protocols (IS-IS, BGP, OSPF), and virtual systems (VS). Key steps include: 1. Configuring VLANs, IP addresses, and interfaces on CE devices 2. Enabling IS-IS on VLAN interfaces for routing between CE devices 3. Configuring BGP and iBGP between CE routers to exchange routes 4. Creating virtual systems VS1 and VS2 on a switch and assigning interfaces for isolation

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    57 views5 pages

    Isis Config

    Uploaded by

    Praveen Singh Bhadoriya
    The document describes configurations on multiple devices (CE1, CE2, CE3) to set up VLANs, routing protocols (IS-IS, BGP, OSPF), and virtual systems (VS). Key steps include: 1. Configuring VLANs, IP addresses, and interfaces on CE devices 2. Enabling IS-IS on VLAN interfaces for routing between CE devices 3. Configuring BGP and iBGP between CE routers to exchange routes 4. Creating virtual systems VS1 and VS2 on a switch and assigning interfaces for isolation

    Copyright:

    © All Rights Reserved
    Download as TXT, PDF, TXT or read online from Scribd
    Download as txt, pdf, or txt
    of 5

    disp vlan

    inter vlan 10
    ip add 10.1.1.1 30
    q
    inter vlan 100
    ip addd 172.1.1.254 24
    inter g1/0/2
    undo shut
    port link-type access
    port default vlan 100
    commit
    disp this
    display inter brief
    ping 172.1.1.1

    q
    inter g1/0/0
    port link-type trunk
    disp this
    port trunk allow-pass vlan 10
    commit
    disp this

    disp ip inter brief

    CE2
    inter loo
    inter l 0
    ip add 2.2.2.2 32
    q
    undo shut
    port link-type trunk
    port trunk allo-pass vlan 10
    inter g1/0/0
    port linktype trunk
    port trunk allow-pass vlan 10
    commit
    inter vlan10
    ip add 10.1.1.2 30
    commit
    q
    inter vlan 20

    ip add 10.1.1.5 .0
    commit
    q

    ce3
    sy ce3
    commit
    vlan back 200 20
    inter g1/0/0
    undo shut
    port link-type trunk
    port trunk allow-pass vlan 20
    commit
    q
    port link-type access
    port default vlan 200
    inter vlan 20
    ip add 10.1.1.6 24
    inter vlan 200
    ip add 192.1.1.254 24
    q
    disp ip inter brief
    disp vlan 2oo
    inter this

    steps
    q. configure ip
    2. congigure isis

    isis 1
    network-entity 49.1234 .010.01
    inter vlan 10
    isis enable 1
    commit
    q
    inter loop 0
    isis ena 1
    q
    inter vlan 100

    ce1
    disp isis peer :-
    disp isis interface :- to check interface added to interface

    is-level level-2 : - to change it to level 2


    commit

    is-level level-2 :

    disp
    disp isis lsdb :- to look lavel 2 database

    is-name ce1
    disp isis lsdb

    inter vlan 100


    isis silent
    commit

    BGP

    steps 1. configure ip address


    seps 2. isis
    steps 3. bgp
    sys ce1
    comit

    vlab batch 10 100


    commit
    itner g10/0/0
    port lingktype trunk
    port trunk allow pass vlan 10
    inter vlan 10
    ip address 10.1.1.1 30
    q
    inter vlan 100
    ip addre 172
    q
    port link ty trunk
    port trunk allow pass vlan 100
    inter loop back 0
    ip addre 11.1.1 32
    ping

    ce3
    sinter loop 0
    ip add 2..

    ce1
    isis
    net-entity 49.1234.0010.0100.1001.00
    is-level level-2
    commit

    inter loo0
    isis enab 1
    inter vlan 10
    isis enab 1
    inter vlan 100
    isis enab 1

    ip route-static 200.200.200.200 32 nul 0


    dis ip routing-table

    EGP

    CE3
    bgp 200
    peer 123.1.1.1 as-number 100
    commit
    network 192.1.1.0 24
    commit
    disp this

    CE@
    bgp 100
    peer 123.1.1.2 as-nu 200
    commit
    disp this
    dis bgp peer

    CE2
    ibgp

    peer 1.1.1.1 as-number 100


    peer 1.1.1.1 connect-interface lppback 0
    commit
    disp this

    ce1
    bgp 100
    peer 2.2.2.2 as-number 100
    peer 2.2.2.2 connect-interface loopback 0
    commit
    network 172.1.1.0 24
    commit

    disp ip routing-table
    bgp routing-table
    dis bgp routing-table

    ce2

    peer 1.1.1 next-hop-local

    trill
    network-entitly 00.1111.1111.1111.00
    nickname 111
    carrier-vlan 10
    commit
    dis this

    q
    inter g1/0/1
    trill enable
    commit
    dis this

    dis vlan

    ce66
    trill
    nickname 666 root-priority 65534
    commit
    dis trill interface
    dis trill interface verbose

    ce1
    trill
    ce-vlan 100

    dis trill route


    dis trill route
    dis interface g1/0/1

    VS-

    admin
    resoure-templeate t1
    resourceu4route upper-limit 1234
    q
    virtual-system vs1
    port-mode group resource-template t1
    commit
    dis this

    assign interface GE 1/0/0


    y
    commit
    q
    q
    switch virtual-system vs1
    vlan 100
    ip address 100.1.1.1 24
    port link-type access
    port def v 100
    undo shut dhown
    user-interface vty 0 4
    authentication-mode password c Huawei@1234
    commit
    user privilege level 3

    admin
    virtual-system vs2
    port-mode groupassign intterface ge 1/0/9
    y
    commit
    dis this

    q
    switch virtual-system vs2
    dis inter brief

    dis virtual-system

    You might also like