Industrial Engine C9 ACERT®

205-280 bkW/
275-375 bhp 1800-2200 rpm

CATERPILLAR® ENGINE
SPECIFICATIONS
I-6, 4-Stroke-Cycle Diesel
Bore (mm, in) 112.0 mm, 4.41 in.
Stroke (mm, in) 149.0 mm, 5.87 in.
Displacement 8.8 liters, 537 cu.in.
Aspiration Turbocharged/ATAAC
Compression Ratio 16:3
Rotation (from flywheel end) Counterclockwise
Cooling System 13.9 liters, 3.7 gallons
Lube Oil System (refill) 32.0 liters, 8.5 gallons
Weight, Net Dry 776 kg, 1711 lb.
(approximate kg, lb)

Image shown may not

reflect actual engine

FEATURES
Emissions Full Range of Attachments
Meets Tier 3, Stage IIIA emission requirements. Wide range of bolt-on system expansion
Tier 3 refers to EPA (U.S.) standards. Stage IIIA attachments, factory designed and tested
refers to European standards.
Unmatched Product Support Offered Through
Worldwide Supplier Capability Worldwide Caterpillar Dealer Network
Caterpillar More than 1,500 dealer outlets
– Casts engine blocks, heads, and cylinder liners Caterpillar factory-trained dealer technicians
– Machines critical components service every aspect of your industrial engine
– Assembles complete engine 99.7% of parts orders filled within 24 hours
Ownership of these manufacturing processes worldwide
enables Caterpillar to produce high quality, Caterpillar parts and labor warranty
dependable product. Preventive maintenance agreements available
Factory-designed systems built at Caterpillar for repair before failure options
ISO 9001:2000 certified facilities. Scheduled Oil Sampling program matches your
oil sample against Caterpillar set standards to
Testing
determine:
Prototype testing on every model:
– internal engine component condition
– proves computer design
– presence of unwanted fluids
– verifies system torsional stability
– presence of combustion by-products
– tests functionality on every model
Every Caterpillar engine is dynamometer tested Web Site
under full load to ensure proper engine For all your industrial power requirements, visit
performance. www.cat-industrial.com.

LEHH4592-01
 Industrial Engine
205-280 bkW/
C9 ACERT® 275-375 bhp
STANDARD ENGINE EQUIPMENT
Air Inlet System Fuel System
Air to air aftercooled (ATAAC) HEUI™ injection
Turbocharged Fuel filter, secondary (2 micron high performance)
Fuel transfer pump
Control System
Fuel priming pump
Electronic governing, PTO speed control
ACERT® Technology
Programmable ratings
Cold mode start strategy Lube System
Automatic altitude compensation Crankcase breather
Power compensation for fuel temperature Oil cooler
Programmable low and high idle and total Oil filler
engine limit Oil filter
Electronic diagnostics and fault logging Oil pan front sump
Engine monitoring system Oil dipstick
J1939 Broadcast (diagnostic and engine status) Oil pump (gear driven)
ADEMTM A4
General
Cooling System Paint, Caterpillar Yellow
Thermostats and housing, vertical outlet Vibration damper
Jacket water pump, centrifugal Lifting eyes
Water pump, inlet
Exhaust System
Exhaust manifold, dry
Optional exhaust outlet
Flywheels and Flywheel Housing
SAE No. 1 Flywheel housing

LEHH4592-01
 Industrial Engine
205-280 bkW/
C9 ACERT® 275-375 bhp
PERFORMANCE CURVES

Performance Curves by Rating (Power)

400

350

300
Power (bkW)

250
D
C High
C Low
200
B
A

150
1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300
Engine Speed (rpm)

Performance Curves by Rating (Torque)

2200

2000

1800

D
1600
Torque (N•m)

C High
C Low
1400
B
1200 A

1000

800

600
1300 1400 1500 1600 1700 1800 1900 2000 2100 2200 2300
Engine Speed (rpm)

DIMENSIONS

Length mm (in) 1198 (47)

Width mm (in) 819 (32)
Height mm (in) 1002 (39)
LEHH4592-01
 Industrial Engine
205-280 bkW/
C9 ACERT® 275-375 bhp
INDUSTRIAL RATINGS AND CONDITIONS
IND - A (Continuous) Continuous heavy duty Engine Performance Engine performance is
service where the engine is operated at corrected to inlet air standard conditions of
maximum power and speed up to 100% of 99 kPa (29.31 in Hg) dry barometer and 25° C
the time without interruption or load cycling. (77° F) temperature. These values correspond
to the standard atmospheric pressure and
IND - B For service where power and/or speed are temperature as shown in SAE J1995.
cyclic (time at full load not to exceed 80%).
Performance measured using a standard fuel with
IND - C (Intermittent) Intermittent service where fuel gravity of 35 degrees API having a lower
maximum power and/or speed are cyclic (time at heating value of 42 780 kJ/kg (18,390 Btu/lb)
full load not to exceed 50%). when used at 29° C (84.2° F) where the density
IND - D For service where maximum power is is 838.9 g/liter (7.001 lb/U.S. gal).
required for periodic overloads. The corrected performance values shown for
Caterpillar engines will approximate the values
obtained when the observed performance data
is corrected to SAE J1995, ISO 3046-2 and 8665
and 2288 and 9249 and 1585, EEC 80/1269 and
DIN 70020 standard reference conditions.

Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
LEHH4592-01 (3-05) ©2005 Caterpillar
All rights reserved.