Chain Saw g5200 PDF
Chain Saw g5200 PDF
Chain Saw g5200 PDF
CHAIN SAW
G5200
NOTE :
1. Use KOMATSU ZENOAH genuine parts specified in the parts list for repair and/or replacement.
2. KOMATSU ZENOAH does not warrant the machines, those which have been damaged by the use
of any parts other than those specified by the company.
3. When placing orders of parts for repair and/or replacement, check if the model name and the serial
number are suitable to those specified in the parts list, then use parts number described in the
parts list.
4. The contents described in the parts list may change due to improvement.
5. The parts for the machine shall be supplied within ten (10) years after the machine is discontinued.
[It is possible that some specific parts may be subject to change of their delivery term and list price
within the limit of ten (10) years after the machine is discontinued. And it is also possible that some
parts may be available even after the limit of ten (10) years.]
18 2670-71510 Cord 1
19 2880-71600 Switch assy 1
20 2810-71610 • Switch 1
21 2670-71621 • Switch Cover 1
22 2880-71630 • Plate 1
23 2670-14130 Screw M5x10 1
24 3699-90512 Spark plug (NGK BPM8Y) 1
25 2810-21270 Plate 1
26 0260-30410 Screw M4x10 2
27 2881-75000 Starter assy 1
28 2810-75110 • Recoil case comp. 1
29 2810-75120 • Guide 1
30 2810-75150 • Boss 1
31 2670-75212 • Reel 1
32 3317-75300 • Spring comp. 1
33 2670-75411 • Rope 1
34 T2041-75420 • Knob 1
35 T2041-75431 • Collar 2
37 2881-75440 • Spring B 1
38 1400-86280 • Washer 1
39 2670-14220 • Screw 1
40 2880-75600 Fan cover comp. 1
42 2880-75620 • Sheet 1
43 2670-14320 Screw 4
44 848C8C90C1 Label, Recoil 1
45 2881-98611 Snow protector 1 OP
Fig.3 HANDLE
Fig.3 HANDLE
Key# PART NUMBER DESCRIPTION Q'TY Q'TY
/UNIT NOTE Key# PART NUMBER DESCRIPTION /UNIT NOTE
1 2880-32101 Left handle comp. 1
2 8488251901 Screw M5x19 BT 4
3 2880-32250 Bracket 1
4 2670-14130 Screw M5x10 1
5 2880-32270 Screw M5x8 1
6 2880-31211 Damper 1
7 2810-33007 Right handle assy 1
8 3330-33250 • Stopper 1
9 3310-33262 • Spring 1
10 3310-33271 • Knob 1
11 2810-33280 • Damper (A) 1
12 2670-75520 • Screw 1
13 2810-33211 • Gasket 1
14 2670-33311 • Throttle lever 1
15 3356-33321 • Throttle spring 1
16 04025-00524 • Spring pin ø5.2x24 1
17 848C3033E3 Arm 1
18 2670-34110 Grip cover 1
19 8488251901 Screw M5x19 BT 1
20 2810-25210 Chain catcher 1
21 2670-14320 Screw M5x14 1
22 2880-35111 Damper 3
23 8488251601 Screw M5x16 BT 4
24 2810-35150 Damper cap 3
25 2881-35110 Spring 1
26 2881-35120 Spacer 1
27 2880-35211 Damper 2
28 3350-35170 Bolt 2
29 2880-35250 Cap 2
Fig.6 CARBURETOR
Fig.6 CARBURETOR
Key# PART NUMBER DESCRIPTION Q'TY Q'TY
/UNIT NOTE Key# PART NUMBER DESCRIPTION /UNIT NOTE
1 2880-81001 Carburetor assy 1 WT-281A
2 3306-81380 • Screen 1
3 2810-81120 • Pump cover 1
4 3310-81130 • Screw 1
5 3304-81140 • Gasket, pump 1
6 1172-81150 • Diaphragm, pump 1
7 2810-81170 • L needle 1
8 1491-81160 • L needle spring 1
9 3310-81230 • Lever 1
10 3310-81240 • Screw M lever pin 1
11 1262-81270 • Spring 1
12 3310-81250 • Pin, lever 1
13 3310-81280 • Cover 1
14 3310-81260 • Diaphragm assy 1
15 3310-81290 • Gasket 1
16 3356-81310 • Valve, inlet 1
10 3356-97110 Protector 1