Coconut

Fatty Acid Diethnolamide ‐ CDE 85

PRODUCT Coconut Fatty Acid Diethanolamide –CDE 85

INCI Name / Origin Coconut Fatty Acid Diethanolamide / Vegetable Origin

CAS No. 68603-42-9

EINESCS No. 271-657-0

H.S Code 3824.90.900

Physical Appearance Yellowish Liquid

SPECIFICATION

Coconut Fatty Acid Diethanolamide –CDE 85

 Parameter Method Specification Typical value

Light yellowish
 Physical Appearance Visual liquid.
Light yellowish liquid.

By Calculation [100-FFA-
 Total Amide Content. % 85.0 Min 87.1
F.Amine-Ester-water-Glycerine]
 Free Amine ( % DEA ) In-hse HOM CS 03:1994 5.0 % Max. 4.08

 Glycerol. % DGF E-III 3A-55 10.0% Max 8.0 %

 Colour APHA ASTM D1209-1988 300.0 Max 210.0

 pH – Value [ 2% Solution ] ISO 4316 - 1997 9.0 – 11.0 9.7 %

 % Ester By FTR 0.65

 Free Fatty Acid % AOCS Ca 5a-40 : 1997 0.5 % Max. 0.06

 Water ( Karl Fischer ) % ISO 760 ( Part 7 ) : 1978 0.5 % Max. 0.04

Packing: 200 Kg.Net in HDPE drums or Bulk in ISO Tank container.

Storage:

In sealed original containers and kept at temperature

not exceeding 50°C as with all DEA amides, if
overheating does occur amide ester will be formed To
reverse the reaction CDE should be stored at room
temperature ,failure to do so may result in formulation
product with decreased foam and low viscosity.

PACKING : 1 unit 20 FT Container :
Country Of Origin : Malaysia
Loading Port : Malaysia
Packing: 200 Kg. net. X 80 New Steel Drum = 16 MT Per 20 FT Full Container Load.
► This product is of 100% vegetable origin and Kosher certified.
IMPORTANT NOTE: The information on product specifications provided herein is only binding to the extent confirmed by TIMUR NETWORK in a written Sales Contract. TIMUR NETWORK
EXPRESSLY DISCLAIMS ANY RESPONSIBILITY FOR THE SUITABILITY OF THE PRODUCTS FOR ANY SPECIFIC OR PARTICULAR PURPOSES INTENDED BY THE USER. Suggestions for
the use and application of the products and guide formulations are given for information purposes only and without commitment. Such suggestions do not release TIMUR NETWORK`S customers from
testing the products as to their suitability for the customer’s intended processes and purposes. TIMUR NETWORKS does not assume any liability or risk involved in the use of its products as the
conditions of use are beyond its control. The user of the products is solely responsible for compliance with all laws and regulations applying to the use of the products, including intellectual property
rights of third parties.

TIMUR NETWORK [MALAYSIA] SDN.BHD.

No. 26 LORONG BAYU TINGGI 1B/KS6, BATU UNJUR, 41200 KLANG, SELANGOR, MALAYSIA,
TEL: 00603-33249852, FAX: 00603-33249851, Webpage: www.timurnetwork.com
Coconut Fatty Acid Diethnolamide ‐ END USE APPLICATIONS

► APPLICATION USES
 A pale yellow viscous transport liquid suitable as a foam stabilizer and thickening
 It contains over 83% active matters and enhances the total detergency when used with other surfactants.
 Wide used in liquid detergents, ,house hold , personal care, foam booster, foam stabilizer , viscosity
booster, shampoo and bath formula , and softener for skin and hair.
 Also used in Hair shampoos, Bubble bath, foam bath, Liquid soap and detergent.
 This product is of 100% vegetable origin and Kosher certified.
.

► HOME CARE
 Coconut Fatty Acid Diethanolamide is an easily processible liquid alkanolamide having faint odour,
 It allows considerable improvements to many properties of active substance in washing.
 CDE is an additive, a conditioner , a solubilizer, an emulsifier and a viscosity-adjusting product for active
substance in washing application / preparation.
 CDE is doluble or miscible in fatty oils and fatty esters ( Cosmetic Oil components ) depending on the type
of oils and the amount of the CDE type used, A particular characteristic of CDE is its ability to increase the
viscosity in the formulation of surfactant. This especially so in combination with fatty alcohol ether
sulphates. Often a very small addition of CDE will suffice in improving the thickening effect by common salt.

 Improving the washing and cleansing actions or properties.

 Increasing of foam holding properties with high fat loads – especially foam boosting effects.
 Incresing the solubility of oily components and perfumed bath preparations in surfactant solution.
 Increasing the resistance of emulsion
 Improving the effects in skin feel or hair feel.

► OTHER
Coconut Fatty Acid Diethnolamide has numerous field of application, mainly because of its special
characteristics, following are examples where it can be used as quality – improving additives in formulation.

 Shampoos
 Cosmetics bathing prepartion.
 Pasty and liquid hand and skin preparations.
 Dishwashing Liquid
 Industrial and Household products.

In the above preparation CDE is used between 1 - 5%, in relation to the final products. For special cases. CDE
can also be used in larger amount.

TIMUR NETWORK [MALAYSIA] SDN.BHD.

No. 26 LORONG BAYU TINGGI 1B/KS6, BATU UNJUR, 41200 KLANG, SELANGOR, MALAYSIA,
TEL: 00603-33249852, FAX: 00603-33249851, Webpage: www.timurnetwork.com
 PAKCING –SHIPPING ‐ STORAGE AND PHYSICAL PROPERTIES

PHYSICAL & CHEMICAL PROPERTIES

Parameter Value
Chemical Name Coconut Fatty Acid Diethanolamide -CDE
Physical State Clear Yellowish Liquid
Odour Odourless
Colour Yellowish
pH 9-11 [ at 20g/I H2O] (20 °C) DGF-H-III-1
Boiling Point -bp Approx. 168-274°C AOCS Tr 1a-64
Solidification pt °C <5 °C DGF-C-IV3c [ Dalican]
Flash Point Approx. 194°C DIN ISO 2592
Relative Density (20°C) (20 °C) ca. 0.99g/cm3 DGF-C-IV-2
Solubility @ 20°C Practically Insoluble

PACKING SHIPPING AND STORAGE

Product Coconut Fatty Acid Diethanolamide ‐CDE
Packing – Steel Drum 200 Kgs. Net X 80 New Steel Expoxy Coated Drum = 20 MT Per 20 FT Full Container Load
Packing – HDPE Drum 200 Kgs. Net X 80 HDPE Plastic Drum = 20 MT Per 20 FT Full Container Load
Packing – Flexi Bag 20 MT Flexi Bag X 1 = 20 MT Per 20 FT Full Container Load.
Packing – ISO Tank 20 MT ISO Tank X 1 = 20 MT Per 20 FT Full ISO Tank Container Load.

Keep in cool and dry place, avoid extreme heat and cold, Store in clean, dry preferably
Storage :
stainless steel vessels, in Bulk, Stored at ambient temperature.

Payment Confirmed Irrevocable 100% L/C @ Site.

Shipping Mark Company Standard OR Customer’s request.
Country Of Origin Malaysia
Loading Sea Port Malaysia

STANDARD SHIPPING DOCUMENT

1 CERTIFICATE OF MALAYSIAN ORIGIN LEGALLISED BY CHAMBER OF COMMERCE
2 B/L - SHIPPING BILL OF LADING
3 PACKING LIST
4 COMMERCIAL INVOICE
5 CERTIFICATE OF ANALYSIS
6 SALES CONTRACT



TIMUR NETWORK [MALAYSIA] SDN.BHD.
No. 26 LORONG BAYU TINGGI 1B/KS6, BATU UNJUR, 41200 KLANG, SELANGOR, MALAYSIA,
TEL: 00603-33249852, FAX: 00603-33249851, Webpage: www.timurnetwork.com
 MATERIAL SAFETY DATA SHEET [ MSDS ] Coconut Fatty Acid Diethnolamide

1.

IDENTIFICATION OF THE PRODUCT / PREPARATION AND COMPANY

Commercial name Coconut Fatty Acid Diethanolamide ‐CDE
Product name Coconut Fatty Acid Diethanolamide
Company Timur Network Malaysia Sdn.Bhd.
No. 26 Lorong Bayu Tinggi 1B/KS6, Batu Unjur, 41200 Klang, Slangor, Malaysia
Telephone +60 3 33249851
Fax +60 3 33249852
Application Home Care / Personal Care / Industrial

2.

HAZARDS IDENTIFICATION OF THE PRODUCT

Not applicable at ambient temperature,
Human health risk inhalation
vapour from heated product can cause irritation
Skin Contact Not irritating.
Eye Contact Can cause irritation.
Environmental hazards None identified.

3.

COMPOSITION/INFORMATION ON INGREDIENTS
CAS No. 68603-42-9
EINESCS No. 271-657-0
H.S Code 3824.90.900
Physical Appearance Yellowish Liquid

4.

FIRST AID MEASURES

General Information In case of adverse health effects seek medical advise.
Inhalation Remove to fresh air.
Skin contact Wash off with plenty of water and soap.
Wash out with water without delay and obtain medical attention if any sensations
Eye contact
persist.
Remove material from mouth. Drink plenty of water. If large amount
Ingestion
Swallowed or symptoms develop obtain medical attention.

5.

FIRE – FIGHTING MEASURES

Extinguishing media Water spray, foam, dry powder, carbon dioxide.
Unsuitable extinguishing media None
Specific hazards Formation of acrolein, see point 3 above.
Protection of -fighters Protective clothing and self-contained breathing equipment should be carried

TIMUR NETWORK [MALAYSIA] SDN.BHD.

No. 26 LORONG BAYU TINGGI 1B/KS6, BATU UNJUR, 41200 KLANG, SELANGOR, MALAYSIA,
TEL: 00603-33249852, FAX: 00603-33249851, Webpage: www.timurnetwork.com
 6.

ACCIDENTAL RELEASE MEASURES

General Information Danger of slipping on escaped product.
Personal precautions No special precautions required.
Environmental precautions Minimise contamination of drains, surface and ground waters.
Transfer product to suitably labelled containers for disposal at an approved site.
Methods for cleaning up
Residues and small spillage may be washed away with water and detergent.

7.

HANDLING AND STORAGE

Handling No specific protective measures are required. / Avoide Open falme
Store in the original closed containers under dry conditions. Avoid extremes of
Storage
temperatures. / Storage Class VCI , Storage Class :10
Other information For quality reasons: Avoid elevated temperatures.

8.

EXPOSURE CONTROLS/PERSONAL PROTECTION

No special measures required.
Technical measures Adequate ventilation should be maintained when handling heated product.
Immediately remove soiled or soaked clothing. Do not eat, drink while working.
Personal protection Hand protection : Suitable protective gloves.
Eye protection : Protective goggles.

9.
PHYSICAL & CHEMICAL PROPERTIES

Parameter Value
Chemical Name Coconut Fatty Acid Diethanolamide -CDE
Physical State Clear Yellowish Liquid
Odour Odourless
Colour Yellowish
pH 9-11 [ at 20g/I H2O] (20 °C) DGF-H-III-1
Boiling Point Approx. 168-274°C AOCS Tr 1a-64
Solidification pt °C <5 °C DGF-C-IV3c [ Dalican]
Flash Point Approx. 194°C DIN ISO 2592
Relative Density (20°C) (20 °C) ca. 0.99g/cm3 DGF-C-IV-2
Solubility @ 20°C Practically Insoluble

10.

STABILITY AND REACTIVITY

Stability Stable under normal conditions.
Conditions to avoid Finely divided in insulation etc the product can catch fire
Materials to avoid Strong oxidizing agents.
None if used for intended purpose.

TIMUR NETWORK [MALAYSIA] SDN.BHD.

No. 26 LORONG BAYU TINGGI 1B/KS6, BATU UNJUR, 41200 KLANG, SELANGOR, MALAYSIA,
TEL: 00603-33249852, FAX: 00603-33249851, Webpage: www.timurnetwork.com
 11.

TOXICOLOGICAL INFORMATION

Skin and eye irritation,rabbit Primary skin irritating.

Skin sensitization No sensitization reactions.
Ingestion Acute oral toxicity : LD50 > 5000 mg/kg body weight

12.
ECOLOGICAL INFORMATION
Persistence and degradability:
Readily and rapidly degradable : all individual organic substance contained in the product achieve values in test for
ready degradability . eg. OECD 301 A-F ] of at leas 60% BOD/COD or 70% DOC reduction ( tolerance value for
classification as readily degradable >=70% DOC reduction for >=60% BOD/COD in 20 days.
Degradability Ecotoxicity Readily biodegradable BOD5 / COD = 0,75 / 1,00
Acute fish toxicity : LC50=1-10mg product (golden orfe. DIN 38412T15 or zebra fish, ISO 7346)
Acute bacteria toxicity: EC 0>100mg product / Oxygen consumption test with Ps .putida

13.
DISPOSAL CONSIDERATIONS
Re-use/ recycling of waste highly recommended. Disposal according to local
Waste disposal method
legislation.
Contaminated packaging Observe local regulations.

14.

TRANSPORT INFORMATION
Not a hazardous material according to RID/ADR, GGVS/GGVE, ADNR, IMDG, ICAO-TI/IATA-DGR.

15.
REGULATORY INFORMATION

Classification and Identification.

Symbol Of Danger – Xi : Irritant

R-phrases:
R38 : irritating to skin
R41 : Risk of serious damage to eyes
S-phrases:
S 24/25 : Avoide contact with skin and eyes.
S26 : Incase of contact with eyes , rines immediately with plenty of water and seek medical advise
S28 :After contact with skin,wash immediately with plenty of water
S37/39 :Wear suitable gloves and eye/face protection.
National Prescripations : Water hazard class (WGK)=2 water endangering product

16.
OTHER INFORMATION
This information is based on our current level of knowledge and relates to the product in the state in which it is
delivered. It is intended to describe our products from the point of view of safety requirements and is not intended to
guarantee any particulars properties.
To the best of our knowledge, the information contained in this sheet is correct. However, we cannot accept responsibility or liability for any
consequences arising from its use.

TIMUR NETWORK [MALAYSIA] SDN.BHD.

No. 26 LORONG BAYU TINGGI 1B/KS6, BATU UNJUR, 41200 KLANG, SELANGOR, MALAYSIA,
TEL: 00603-33249852, FAX: 00603-33249851, Webpage: www.timurnetwork.com