FTE Vs FT

108 ENGINE – 1HD-FTE ENGINE
1HD-FTE ENGINE
JDESCRIPTION
Based on the previous 1HD-FT engine, the 1HD-FTE engine has adopted an electronically controlled injec-
tion pump and an intercooler and has undergone improvements in the various areas of the engine to improve
the engine performance and fuel economy while reducing exhaust emissions. At the same time, this engine
contributes to the vehicle’s quieter operation and improved reliability.
147EG28
147EG27
LAND
CRUISER
NCF147E
Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

ENGINE – 1HD-FTE ENGINE 109
JENGINE SPECIFICATIONS AND PERFORMANCE CURVE
Engine
1HD-FTE 1HD-FT
Item
No. of Cyls. & Arrangement 6-Cylinder, In-Line z
24-Valve, OHC,
Valve Mechanism z
Belt & Gear Drive
Combustion Chamber Direct Injection Type z
Manifolds Cross-Flow z
Distributor Type Distributor Type
Fuel System
(Electronically Controlled) (Mechanically Controlled)
Displacement cm3 (cu. in.) 4164 (254.0) z
Bore x Stroke mm (in.) 94.0 x 100.0 (3.70 x 3.94) z
Compression Ratio 18.8 : 1 18.6 : 1
Max. Output [EEC] 150 kW @ 3400 rpm 125 kW @ 3600 rpm EG
Max. Torque [EEC] 430 N.m @ 1400 X 3200 rpm 380 N.m @ 2500 rpm
Open 12_ BTDC z
Intake
Valve Close 24_ ABDC 32_ ABDC
Timing Open 54_ BBDC z
Exhaust
Close 12_ ATDC z
Intercooler With N.A.
Fuel Cetane Number 48 or higher z
Oil Grade API CF-4 API CD or Better
: 1HD-FTE
: 1HD-FT kW
160
140
N.m
450 120
400
Torque
100
350
Output
300 80
250
60
40
20
0
1000 2000 3000 4000 5000 rpm
Engine Speed 147EG30
LAND
CRUISER
NCF147E

JMAJOR DIFFERENCES
Major differences of the new 1HD-FTE engine and previous 1HD-FT engine are listed below.
Item Features
D A cylinder head cover made of resin has been adopted for weight
reduction and low-noise operation.
D The rigidity of the cylinder block has been improved to reduce noise and
vibration.
Engine Proper D Newly designed pistons have been adopted to improve the engine
performance and reliability.
D The crankshaft has been made highly rigid to reduce noise and vibration.
D The crankshaft bearings have been machine-bored to improve their
reliability.
D An aluminum radiator core is used for weight reduction.
Cooling System D A step-up linear type temperature controlled fluid coupling has been
adopted to improve cooling performance.
D A high-performance oil filter element has been adopted to improve the
cleanliness of the engine oil.
Lubrication System
D The oil capacity of the engine has been increased to improve its reliability.
D A drip pan is provided on the oil cooler cover to improving serviceability.
D A ball joint has been adopted in the front exhaust pipe to reduce noise and
Intake and Exhaust vibration.
System D An oxidation catalytic converter has been adopted in the front exhaust
pipe to reduce exhaust emissions.
D A compact turbocharger has been adopted to attain a widely ranging
Turbocharger System high-efficiency region from the low- to the high-speed range.
D An intercooler has been adopted to improve engine performance.
D A radial plunger type electronically controlled injection pump that
produces a high injection pressure has been adopted to improve the engine
Fuel System performance while reducing exhaust emissions.
D The injection nozzles have been optimized to improve the engine
performance and reduce exhaust emissions.
The 12/24 volt switchover system has been discontinued to simplify the
Starting System
wiring system.
Engine Control D An electronic fuel injection system has been adopted.
System D M-OBD (Multiplex On-Board Diagnosis) system is adopted.
LAND
CRUISER
NCF147E

JENGINE PROPER
1. Cylinder Head Cover

D The No.1 cylinder head cover is made of resin, adopts a curved shape, and has optimally allocated ribs
for weight reduction and reduced noise.
D Spaced bolts are used for fastening the cylinder head covers. In addition, vibration isolating washers con-
taining laminated layers of rubber and aluminum sheets have been adopted to achieve a floating retaining
construction that reduces noise and improves reliability.
D The blowby gas passage in the cylinder head cover has adopted a maze-like configuration to minimize the
consumption of engine oil through blowby gas.
D A No.2 cylinder head cover has been adopted. The No.2 cylinder head cover, which is made of iron sheet,
is completely covered with foam rubber on the inside. A vibration isolating rubber gasket is used to achieve
a floating retaining construction to improve sound insulation.
EG
Cylinder Head Cover No.2
Cylinder Head
Cover No.1
Blowby Gas Flow

Gasket
147EG46 147EG47
Rubber
Aluminum
Cinched Sheet
Adhesive
Film
Spaced Bolt
151EG33 Vibration Isolating Washer
Gasket Cross Section
147EG48
LAND
CRUISER
NCF147E

2. Cylinder Head
D Similar to the previous 1HD-FT engine, the adoption of the 4-valve mechanism has made it possible to
position the injection nozzle perpendicularly over the center of the cylinder bore. Together with the adop-
tion of 2 intake ports of different shapes, this enables the generation of an optimal swirl and the introduc-
tion of an ample volume of intake air. As a result, the mixing of fuel and air has been accelerated to achieve
an appropriate combustion.
D The cooling performance has been improved by enlarging the water jacket around the exhaust valves and
the injection nozzles, thus improving the reliability of the engine.
D The exhaust valve seats have been changed to a type made of sintered alloy that excels in wear resistance.
Injection Nozzle
Intake
Exhaust
Port
Valve Seat
Front
Exhaust
147EG49
147EG102
3. Cylinder Head Gasket

D A 3-layer steel laminate type cylinder head gasket has been adopted.
D The gasket has adopted a bead construction at its cylinder bores, water holes, and oil holes. The periphery
of the gasket has been folded to accept bearing stress. This prevents unnecessary bearing stress from being
applied to the sealing portions such as at the bores, thus restraining the deformation of the bores over the
cylinder block.
Bead Around Bore
A A’ B
Bead Around Water Hole Folded

B’
A – A’ Cross Section B – B’ Cross Section
147EG50
LAND
CRUISER
NCF147E

4. Cylinder Block
D Crankshaft bearing caps with a ladder frame construction have been adopted as in the previous model. To
accommodate the high performance engine, the ladder frame has been optimally designed to improve its
rigidity while restraining the increase of its weight, thus reducing noise and vibration.
D Along with the adoption of the engine control system, the hole for installing the crankshaft position sensor
is provided in the crankshaft bearing cap.
Cylinder Block
EG
Crankshaft Bearing
Cap
Crankshaft Position Sensor

Installation Hole
147EG51
5. Connecting Rod
D The connecting rod is made of a lightweight
carbon steel that withstand higher speed and
high output operation.
D The small end of the connecting rods has been
given a tapered shape to reduce weight.
147EG52
LAND
CRUISER
NCF147E

6. Piston
D The piston is made of aluminum alloy that offers high temperature strength. The top ring groove has been
treated with MMC (Metal Matrix Composites) to improve its wear resistance.
D The combustion chamber has been designed with an optimal shape to improve the engine performance
while reducing exhaust emissions.
D The piston skirt has been designed with an optimal shape to reduce noise and vibration.
D The cross sectional area of the oil galley in the piston has been enlarged to improve the piston’s cooling
performance and reduce its temperature during high power output.
D A gas nitriding process has been applied to the piston ring surface to improve its durability and reduce the
piston ring tension, thus reducing the friction loss.
Combustion MMC
Chamber
Oil Galley MMC
No.1 Compression
Ring
No.2 Compression
Ring
Oil Ring
Striation Finish
1HD-FT 1HD-FTE
Engine Engine
147EG53
– REFERENCE –
MMC (Metal Matrix Composites)
It is a type of composite material that is made of a metal matrix for the purpose of obtaining characteristics
such as high strength, high elasticity, and low thermal expansion. Because of its excellent heat transmission
performance, this material helps to dissipate the piston’s heat through the piston ring to the cylinder block.
LAND
CRUISER
NCF147E

7. Crankshaft
D As in the previous engine, a crankshaft with 7 forged journals and 12 balance weights has been adopted.
Along with the high performance of the engine, the rigidity of its arms and the balance rate of its weights
have been improved.
D Along with the adoption of the engine control system, a protrusion is provided for the crankshaft position
sensor.
D The inner surface of the crankshaft bearing has been machine-bored to provide minute crests and valleys
in the circumferential direction. This process helps to improve the bearing’s break-in and engine oil reten-
tion, thus improving the reliability of the engine.
Machine-Bored
: Reinforced Area EG
147EG54
Crankshaft Bearing
Cross Section
Protrusion
147EG55 147EG56
8. Crankshaft Pulley
A torsional damper pulley has been adopted to re-
duce noise and vibration. Air Conditioning Pulley Cooling Fan
The pulley for air conditioning, which had pre- Pulley
viously been retrofitted, has now been integrated
with the pulley for the cooling fan. At the same
time, the pulley’s inertial moment has been im- Damper
Damper Rubber
proved and a high-damping rubber damper has
Rubber
been adopted to further reduce noise and vibra-
tion.
147EG57
LAND
CRUISER
NCF147E

JVALVE MECHANISM
1. Camshaft
D As in the previous engine, an assembled type
camshaft in which cam pieces that are pressed
over the knurled shaft has been adopted.
D The shaft is made of carbon steel and is hollow
for weight reduction.
Knurled
Cam Piece
Pressed
147EG59
2. Rocker Arm Shaft

The rocker arm shaft, to which the rocker arms,
nozzle clamps, and camshaft bearing caps are at- Camshaft Bearing Cap
tached, is mounted on the cylinder head via the
camshaft bearing caps. Nozzle Clamp
Rocker Arm No.2

Rocker Arm No.1
147EG60
3. Rocker Arm and Valve

D As in the previous engine, the rocker arms are
made of aluminum and use rollers to improve Rocker Arm Shaft
Oil
wear resistance and to reduce friction loss. Passage
Roller
D The length of the exhaust valve has been ex- Guide Pin
tended so that the valve in its fully closed state
is positioned closer to the piston in order to re- Valve Bride
duce the unnecessary amount of space in the
combustion chamber. As a result, the combus-
tion efficiency has been improved and exhaust
emissions have been reduced.
147EG61
LAND
CRUISER
NCF147E

4. Timing Gear Train

D As in the previous engine, an OHC mechanism that is driven by a belt and gears has been adopted.
D The backlash between the crankshaft timing gear, idle gear, and the injection pump drive gear has been
reduced and the precision of the gear tooth flank has been improved to reduce noise.
D A bearing is used between the idle gear and the idler gear shaft to improve reliability.
D The timing belt cover has adopted a dual construction cross sectional shape containing an air layer and
the portion that attaches to the engine has adopted a floating construction to reduce noise.
D The timing belt cover gasket uses foam rubber that is integrated with the cover to improve serviceability.
D A hydraulic type automatic tensioner has been adopted.
Camshaft Timing Pulley No.1
Timing Belt
Idler Pulley EG
Camshaft Timing
Pulley No.2
Automatic Tensioner
Idler Gear Injection Pump

Drive Gear
Oil Pump Power Steering

Gear Pump Drive Gear
Dual Oil Pump Vacuum Pump

Construction Drive Gear Drive Gear
Crankshaft Timing Gear 147EG62
147EG64 Timing Belt Cover
Cross Section
Insulator
Timing Gear Case
Spaced Bolt
Rubber-Coated
Washer
Gasket
147EG65
Timing Gear Cover
147EG63
LAND
CRUISER
NCF147E

JLUBRICATION SYSTEM
1. General
D The lubrication circuit is fully pressurized and all oil passes through an oil filter.
D A trochid gear type oil pump is directly driven by crankshaft.
D The water-cooled type engine oil cooler is used to lower the oil temperature.
147EG66
ROCKER ARM
IDLE GEAR ROCKER ARM
SHAFT
CYLINDER CAMSHAFT
VACUUM PUMP
HEAD JOURNAL
MAIN OIL HOLE
RELIEF BY-PASS
VALVE CHECK
CRANKSHAFT VALVE VALVE
OIL FILTER
JOURNAL
BY-PASS
CONNECTING VALVE
OIL COOLER OIL JET
ROD
OIL PUMP PISTON

RELIEF
VALVE
TURBO-
OIL STRAINER
CHARGER
OIL PAN
LAND
CRUISER
NCF147E

2. Oil Pan and Oil Strainer

D As in the previous engine, a vibration damping steel plate is used for the oil pan for quieter operation. In
addition, an oil pan cover and an insulator have been installed for noise reduction.
D The curvature of the oil strainer pipe has been increased and the length of the pipe has been shortened to
reduce the oil intake resistance, thus improving the oil pressure build-up when the engine is started.
D An oil level sensor is provided in the oil pan for efficient servicing.
When the oil level falls below the specified level, the oil level sensor causes the low engine oil level warn-
ing light inside the combination meter to light up.
D The oil capacity of the oil pan has been increased by changing the shape of the oil pan.
Oil Strainer
EG
Oil Pan
Insulator
Oil Pan Cover Oil Level Sensor
147EG67
LAND
CRUISER
NCF147E

3. Oil Cooler
D The water-cooled oil cooler is enclosed in the cylinder block.
D A drip pan is provided in the oil cooler cover to catch the oil that could drip when the oil filter is replaced.
Oil Cooler
Oil Cooler Cover
Oil Filter
Installation
Portion
Drip Pan
147EG68
4. Oil Filter
D A twin-element type oil filter, in which a full-
By-Pass Valve
flow and bypass elements are combined, is used By-Pass Valve Oil Filter
to increase the cleaning performance of the oil.
D The filter element uses newly developed filter Element
paper to improve the filter’s oil cleaning perfor- (Full Flow)
mance. Element
Check (By-Pass)
Valve Engine
Relief Oil Lubrica-
Valve Pump Relief Valve tion Area
Oil Pan
147EG42
" Oil Filter Element A
Microfilament
has been added
New Previous
147EG41
LAND
CRUISER
NCF147E

JCOOLING SYSTEM
1. General
D The cooling system is a pressurized, forced-circulation type.
D A thermostat with a bypass valve is located on the water inlet housing to maintain suitable temperature
distribution in the cooling system.
D An aluminum radiator core is used for weight reduction.
D A viscous type power heater has been adopted on the cold specification model for Europe to promote the
warming of the engine and to improve the heating performance of the heater during extremely cold temper-
atures.
From
Heater
EG
To Heater
147EG69
Turbocharger
Radiator Cylinder Block

Water
Outlet
Oil Cooler
Heater
Water Inlet Thermostat Water Pump
147EG43
LAND
CRUISER
NCF147E

2. Water Pump
As in the previous engine, the water pump housing
is made of aluminum and the rotor is made of resin Water Pump Housing
for weight reduction. In addition, the volute cham-
ber has been optimally designed to achieve a com- Rotor
pact shape.
147EG70
3. Coupling Fan
A step-up linear type temperature controlled fluid
coupling has been adopted to realize both cooling : Step-Up Linear Type
performance and noise reduction. Fan Speed (rpm) ! : 3-Stage Type
Temperature of Air Passing !

Through Radiator (_C)
147EG06
LAND
CRUISER
NCF147E

4. Power Heater
A viscous type power heater has been adopted on the cold specification model for Europe. The power heater
increases the coolant temperature by utilizing the shear heat of the silicon oil and by increasing the engine
load.
Power Heater
Coolant
Heater Hose
Engine
Front Rear
Heater Heater
Magnet
Clutch Magnet IDLE-UP EG
Clutch Switch
Power Heater
147EG71
Air Conditioning Idle-Up
Magnet Clutch Signal Power
Engine Injection
Heater
Ignition Switch ECU Pump
Amp.
147EG72
Construction and Operation

D The power heater, which is located on top of the engine, is driven by a drive belt. Pressing the Idle-Up
switch provided in the instrument panel engages the magnetic clutch, causing the rotor in the power heat-
er to rotate and the silicon oil to mix. The shear heat that is thus generated heats the coolant.
D The power heater is controlled according to engine speed and coolant temperature as described below.
While the power heater is engaged, the engine idling speed increases to 1200 rpm.
Engine Speed Coolant Temp.

ON ON
OFF OFF
2000 2500 rpm 69 74 _C
(156) (165) (_F)
147EG44-1 147EG44-2
However, the power heater is turned OFF when the engine is started, the air conditioning is ON, or the
vehicle is accelerating (for 5 seconds while the vehicle speed is under 30 km/h (19 mph) and the throttle
opening angle is more than 45%).
LAND
CRUISER
NCF147E

JINTAKE AND EXHAUST SYSTEM
1. Intake Manifold
D As in the previous engine, an intake manifold made of aluminum and integrated with the intake air cham-
ber has been adopted. In addition, a large-capacity intake air chamber and isometric intake ports have been
adopted to improve the engine performance.
D Insulators are provided at the area of the intake manifold that mounts onto the cylinder head for noise re-
duction.
D The intake manifold gasket is constructed of steel plates that are coated with foam rubber on both sides,
then riveted to the both sides of a stainless steel substrate. A composite gasket cinched with layered wash-
ers is provided for the areas that are tightened with bolts to achieve a floating retaining construction of the
intake manifold for noise reduction.
D Vibration isolating washers with a layered construction have been adopted for the washers used in instal-
ling the intake manifold.
Insulator
Gasket
Intake Manifold
147EG73
A A
Stainless Steel
Constant
Measurement
Tightening
Rubber Steel Foam

Steel Plate Plate Rubber
Layered Washer Portion Foam Rubber Portion 147EG74
LAND
CRUISER
NCF147E

2. Intake Shutter
The intake manifold is provided with an intake
shutter which shuts out air to reduce vibration VSV
when stopping the engine.
Intake Shutter
Actuator
147EG75
EG
3. Exhaust Manifold
D As in the previous engine, an exhaust manifold
made of cast iron has been adopted.
D A 5-layer steel laminate type exhaust manifold
Exhaust Manifold
gasket has been adopted.
Gasket
147EG76
LAND
CRUISER
NCF147E

4. Exhaust Pipe
D The exhaust pipe is made of stainless steel for improved rust resistance.
D An oxidation catalytic converter has been adopted for the front exhaust pipe to reduce exhaust emissions.
D A ball joint has been adopted for joining the turbocharger and the front exhaust pipe for weight reduction
and for reducing noise and vibration.
D A clamp type joint is used to join the center exhaust pipe and tail pipe to realize weight reduction.
Sub Muffler
Main Muffler
Ball Joint
Clamp Type Joint
Catalytic Converter 147EG89
Turbocharger
Outlet Elbow
Clamp
Gasket Gasket
Spring
Exhaust Pipe Exhaust Pipe
Ball Joint 147EG58 Connecting Exhaust Pipe 156EG06
LAND
CRUISER
NCF147E

JTURBOCHARGER SYSTEM
1. Turbocharger
In place of the previous turbocharger, a compact and lightweight turbocharger that achieves a wide range of
high-efficiency region has been adopted.
: 1HD-FTE Engine
Turbine : 1HD-FT Engine
Wheel
Efficiency
Impeller
Wheel
Airflow Volume EG
Compressor Turbine Wheel Conceptual Drawing
Housing Housing
147EG90
147EG77
2. Intercooler
D An air-cooled type intercooler has been adopted to lower the intake air temperature. As a result, the volu-
metric efficiency has been improved to enhance the engine performance and reduce exhaust emissions.
D Through the adoption of an overlap type drawn cup, a high-density core, and optimally shaped fins, the
intercooler has been made more compact and lightweight while ensuring ample heat dissipating perfor-
mance.
Brazed Brazed
Portion Portion
Cap Plate
A A
Inner Fin
Overlap Type Ordinary

Drawn Cup Drawn Cup
A – A’ Cross Section
147EG78 147EG79
– REFERENCE –
Overlap Type Drawn Cup
It is a type of cup in which the vertical surface of the cup plate is brazed in order to effectively utilize the
brazed portion between the cup plates that ordinarily remains a dead space.
LAND
CRUISER
NCF147E

JFUEL SYSTEM
1. Injection Pump
General
An electronically controlled distributor type injection pump has been adopted. A radial plunger type that
produces a higher injection pressure than the previous axial plunger type has been adopted. As a result, it
has become possible for the injected fuel to become finely atomized in order to realize both improved engine
performance and reduced exhaust emissions.
In the axial plunger type pump, the rollers slip as they roll along the cam plate. Because this slippage does
not occur in a radial plunger type pump, it can inject fuel at a higher pressure.
147EG80
Radial Plunger Type Injection Pump

Shoe
Cam Cam Ring
Spill Control Cam Plate

During Valve Spill
Suction Control
Roller Roller
Valve
Cam Plate
Roller Suction
Plunger During Spilling Port
Roller
Distribution
Cam Ring Port
Radial Plunger Type 147EG92

Axial Plunger Type 147EG93
LAND
CRUISER
NCF147E

Construction and Operation
147EG81
Feed Pump
Roller
Engine Speed Sensor
Plunger
Shoe
EG
Cam Ring
Timer Piston
Timing Control Valve
Spill Control Valve
Fuel Pump Calibration Unit
LAND
CRUISER
NCF147E

1) Operation Outline
1 : The feed pump delivers the fuel from the fuel tank to the pump chamber and maintains its pressure
between 1.5 – 2.0 MPa.
2 : When the spill control valve opens, the fuel fills the pressure chamber.
3 : After the spill control valve closes, the fuel that is charged in the pressure chamber is compressed
by the plunger. Passing through the delivery valve and injection pipe, the pressurized fuel is pumped
to the injection nozzle and injection starts.
4 : As the spill control valve opens and the pressure in the pressure chamber drops, the injection of fuel
is completed.
Spill Control Valve
Pump Chamber
Delivery Valve
Feed Pump To Injection Nozzle
Pressure Chamber
Plunger
147EG82
LAND
CRUISER
NCF147E

2) High-Pressure Generation Mechanism

This mechanism consists of a cam ring, drive shaft, rollers, shoes and plungers. As the drive shaft rotates,
the shoes, rollers and the plungers that are attached to the shaft rotate along the inside of the cam ring.
At that time, the protrusions on the cam ring cause the 4 rollers and plungers to move simultaneously to
the center, causing the fuel pressure to increase.
Shoe
Cam Ring
Roller
Front
Drive
Shaft
EG
Plunger
During Generation of High Pressure During Suction 147EG83
3) Timer Mechanism
The movement of the timer piston, which is linked to the cam ring, causes the cam ring to oscillate. As
a result, the relational positions of the drive shaft and the cam ring change, which causes the plunger to
compress the fuel, thus changing the starting position (injection timing).
Front
Timer Piston
Most Retarded Timing During Operation 147EG84
LAND
CRUISER
NCF147E

2. Injection Pipes
D Along with the adoption of the high-pressure injection, the seal portions at the both ends of the pipes have
been spherically shaped to improve their sealing performance.
D The pipes are clamped together up in the air adjacent to the injection pump. Also, at the areas where the
pipes are clamped to the intake manifold, rubber cushions are used to achieve a floating construction. As
a result, improved reliability and quieter operation have been realized.
Rubber
Pipe Sealing Portion

147EG85
3. Injection Nozzle
D As in the previous engine, 2-stage injection
nozzles are used. For this model, the amount of Over Flow Fuel
pre-lift has been decreased to reduce the com-
bustion sound.
D The VCO (Valve Covered Orifice) nozzles that From
provide excellent injection characteristics have Injection
been adopted to reduce white smoke and ex- Pump
haust odor.
D The nozzle needle seats more gently to improve
the nozzle’s durability.
1HD-FTE 1HD-FT 147EG86
Engine Engine
LAND
CRUISER
NCF147E

4. Fuel Damper
A fuel damper has been adopted to reduce the
vibration of the fuel return pipe.
From
Injection
Pump
To Fuel
Tank
147EG128
JINTAKE HEATER EG
D An intake heater has been adopted to heat the intake air at low temperature to improve the cold starting
performance of the engine. The intake heater continues to operate for a prescribed length of time even after
the engine has started in order to reduce the generation of diesel knocks and white smoke immediately
following the starting of the engine.
D The intake heater uses a PTC (Positive Temperature Coefficient) element and is controlled by the engine
ECU.
Intake Shutter
PTC Element
Intake Heater
Intake Heater
147EG87 147EG88
JSTARTING SYSTEM
The previous 12/24 volt switchover system has been discontinued to simplify the system. The resistance in
the wiring between the batteries and the starter is minimized by connecting the batteries in parallel in order
to ensure the same level of starting performance as that of the previous model.
LAND
CRUISER
NCF147E

JENGINE CONTROL SYSTEM
1. General
To operate the engine is an optimal condition. The engine control system of the 1HD-FTE engine have gener-
al control of the following functions: fuel injection volume control, fuel injection timing control and idle
speed control. In addition, a diagnosis function has been added to improve the serviceability of the engine.
Furthermore, the cruise control system has been enclosed in the engine ECU.
System Outline
D Based on the signals received from the sensors, the engine ECU deter-
Fuel Injection Volume mines the fuel injection volume in accordance with the engine condition.
Control D In vehicles equipped with automatic transmission, torque control com-
pensation during gear shifting is used to minimize the shift shock.
Fuel Injection Timing Based on the signals received from the sensors, the engine ECU determines
Control the fuel injection timing in accordance with the engine condition.
The engine ECU determines the idle speed in accordance with the engine
Idle Speed Control condition, and controls the fuel injection volume in order to achieve the tar-
get idle speed.
Corrects the fuel injection volume that is directed to each cylinder during id-
Stable Idling Control
ling, thus reducing engine vibration.
Controls the vehicle speed by regulating the injection volume in accordance
Cruise Control with the instructions received from the cruise control computer that is inte-
grated in the engine ECU.
Intake Constrictor
Shuts off the intake air to reduce the vibration when the engine stopped.
Control
Controls the length of time when the current is applied to the Intake Heater
Intake Heater Control
in accordance with the coolant temperature.
EGR Control Controls the engine EGR volume in accordance with the engine condition.
D By controlling the air conditioning compressor ON or OFF in accordance
Air Conditioning with the engine condition, drivability is maintained.
Cut-Off Control D Also controls the power heater on the models equipped with a power heat-
er.
Prohibits fuel delivery if an attempt is made to start the engine with an invalid
Engine Immobiliser
ignition key.
D When the engine ECU detects a malfunction, the engine ECU diagnoses
and memorizes the failed section.
Diagnosis D A newly developed diagnostic system which utilizes a high speed bi-
directional communication line to provide extended diagnostic capabili-
ties and features.
When the engine ECU detects a malfunction, the engine ECU stops or con-
Fail-Safe
trols the engine according to the data already stored in memory.
LAND
CRUISER
NCF147E

2. Construction
The configuration of the engine control system which can be broadly divided into three groups: the engine
ECU, the sensors and the actuators, is shown in the following chart.
SENSORS ACTUATORS
TURBO PRESSURE SENSOR PIM FUEL INJECTION VOLUME
D Intake Manifold Pressure Signal CONTROL
SPVD
NE EDU
ENGINE SPEED SENSOR
SPVF
D Engine Speed Signal SPILL CONTROL VALVE
CRANKSHAFT POSITION SENSOR TDC
SVR
D Crankshaft Angle Signal SPILL CONTROL RELAY
THW
WATER TEMP. SENSOR
THA FUEL INJECTION TIMING
INTAKE AIR TEMP. SENSOR CONTROL
THF TCV
FUEL TEMP. SENSOR TIMING CONTROL VALVE
ACCELERATOR PEDAL POSITION SENSOR EG

IDL INTAKE HEATER CONTROL
D Idling Signal VA, VAS GIND
D Accelerator Pedal Position Signal GLOW INDICATOR LAMP
IREL
ACCELERATOR PEDAL SWITCH PDL INTAKE HEATER RELAY
D Accelerator Pedal Fully Closed Signal
DATA INTAKE CONSTRICTOR
INJECTION PUMP
CALIBRATION UNIT CONTROL
CLK S / TH
VSV
IGNITION SWITCH STA
D Starting Signal (ST Terminal) Engine
D Ignition Signal (IG Terminal) IGSW ECU EGR CONTROL
EGR
COMBINATION METER SP1 VACUUM REGULATING VALVE
D Vehicle Speed Signal EGRC
VSV (for Cut-Off)
IDLE-UP SWITCH HSW
PA
D Idle-Up Switch Signal VSV (for Turbo Pressure Sensor)
AIR CONDITIONER AMPLIFIER AC1
AIR CONDITIONING CUT-OFF
D A/ C Switch Signal CONTROL
POWER HEATER AMPLIFIER VCH ACT AIR CONDITIONING
D Power Heater Signal THWO AMPLIFIER
NEUTRAL START SWITCH*1 NSW

POWER HEATER CUT-OFF
D Neutral Start Signal CONTROL
FSW VCT
1ST GEAR POSITION SWITCH*2 POWER HEATER AMPLIFIER
PS
POWER STEERING OIL PRESSURE SWITCH
EFI+
ECT+ TRANSMISSION ECU*1
ECT ECU*2 EFI–
ECT–
IMI MREL
TRANSPONDER KEY COMPUTER MAIN RELAY
IMO
TC W
DATA LINK CONNECTOR 3 CHECK ENGINE LAMP
SIL
+B BATT
MAIN RELAY BATTERY
*1: Only for Automatic Transmission Model *2: Only for Manual Transmission Model
LAND
CRUISER
NCF147E

136
Spill Control Valve
Fuel Temp. Sensor

EDU
Intercooler
VSV
Engine Speed Actuator Intake Shuttter
Sensor
Intake Air Temp. Sensor
Intake Heater
Turbo Pressure
Sensor
3. Engine Control System Diagram
EGR Valve
VSV
Timing Control Injection

Valve Pump
Calibra- VSV
tion Water Temp. Crankshaft Position
Unit Sensor Sensor
ENGINE – 1HD-FTE ENGINE

Vacuum Regulating Valve
1st Gear Engine ECU
Position Switch Accelerator
or Pedal Position Vacuum Pump
Neutral Start Sensor
Switch
Accelerator Pedal Switch
147EG94
LAND
NCF147E
CRUISER
Intake Air VSV
Turbo Pressure for Turbo
Temp. Sensor Sensor
Engine ECU Pressure Sensor
EGR Valve
Intake Heater
4. Layout of Components
VSV
for Intake
Shutter
VSV (for EGR)

ENGINE – 1HD-FTE ENGINE
Vacuum Regulating Accelerator Pedal

Valve Position Sensor
Accelerator Pedal
Switch
Injection Pump
DLC3
Water Temp. Sensor
EDU
Crankshaft
Position Sensor
147EG101
137
EG
LAND
NCF147E
CRUISER
5. Main Components of Engine Control System
Turbo Pressure Sensor

The turbo pressure sensor consists of a semicon-
ductor which utilizes the characteristic of a sili- V
con chip that changes its electrical resistance 5
when pressure is applied to it. The sensor con-
Output Voltage
verts the intake air pressure into an electrical sig-
nal, and sends it to the engine ECU in an ampli-
fied form.
In addition, the atmospheric pressure can be de-
tected by switching the piping passage through
the operation of the VSV.
0
13.3 253.5 kPa
(100) (1900) (mm Hg)
147EG103
Turbo Pressure Sensor
Output Characteristics
Engine Speed Sensor

The engine speed sensor is attached to the roller ring in the injection pump to detect the engine speed.
The timing rotor is attached to the drive shaft. Missing 3 teeth at each of the 6 locations, the timing rotor
generates a signal every 7.5_ (crankshaft angle) with its 78 teeth.
Engine Speed
Sensor
Roller
Ring
360_CA*
Drive
Output Voltage
+ Shaft
"
0
#
– Timing
Rotor
147EG95
147EG98
*: CA (Crankshaft Angle)
LAND
CRUISER
NCF147E

Crankshaft Position Sensor

The crankshaft position sensor is attached to the
cylinder block. Using the protrusion that is pro-
vided on the crankshaft, the sensor generates 1
signal for every revolution. This signal is then
sent to the engine ECU as a crankshaft position
signal.
Crankshaft Position
Sensor
To
Engine
ECU
Protrusion
Crankshaft EG
147EG91
Fuel Temperature Sensor
The fuel temperature sensor is attached to the in-
jection pump, and uses an internal thermistor to
detect the fuel temperature.

To compensate for the shift in injection volume
and injection timing caused by the variances in
the injection pump itself, a correction is made by
using the data that is stored in the ROM in the
fuel pump calibration unit.
Fuel Temp.
Sensor

147EG97
Timing Control Valve

The timing control valve is attached to the injec-
tion pump. In accordance with the signals from Moving
Core Coil
the engine ECU, it opens the valve in the fuel Fuel Passage
passage between the pump chamber and the suc-
tion side, thus controlling the injection timing.
When the current flows to the coil of the timing
control valve, the starter core becomes an elec-
tromagnet to push and compress the spring. This
causes the moving core to retract and open the Valve
fuel passage. Spring Starter
Core
147EG99
LAND
CRUISER
NCF147E

Spill Control Valve

The spill control valve is attached to the injection pump to control the fuel injection volume in a accordance
with the signals received from the engine ECU.
When the spill control valve is turned OFF, the passage between the high-pressure chamber and the pump
chamber opens, causing the pressure in the high-pressure chamber to drop. This completes the injection of
the fuel from the injection nozzle.
The length of time till the spill control valve is turned OFF becomes the fuel injection time. Thus, the fuel
injection volume is controlled by increasing or decreasing the length of time till the spill control valve is
turned OFF.
Engine ECU EDU

Spill Control Valve
Coil
Pump
Chamber
Valve
To
Injection
Nozzle Fuel Passage
Pressure Cross Section

Chamber
147EG96
147EG100
Acceleration Position Sensor

D The accelerator position sensor uses a Hall element that outputs voltage that changes linearly in relation
to the amount of pedal effort that is applied to the accelerator pedal.
The accelerator position sensor uses a duplex system to ensure its reliability.
D An idle switch that detects the fully closed condition of the accelerator pedal is enclosed in the accelerator
pedal position sensor.
Accelerator Pedal Switch

Attached to the accelerator pedal in addition to the accelerator pedal position sensor, the accelerator pedal
switch detects the fully closed condition of the accelerator pedal.
LAND
CRUISER
NCF147E

EDU (Electronic Driving Unit)

D The EDU has been adopted to drive the spill control valve at high speeds. The EDU has realized high-
speed driving under high fuel pressure conditions through the use of a DC/DC converter that provides
a high-voltage, quick-charging system.
D The engine ECU constantly monitors the EDU and stops the engine in case an abnormal condition is de-
tected.
IJt Signal SPV+ Signal
V V
150
5 Time Time
0 0
DC / DC Converter
EG
Battery SPV+
Spill
Control
IJt Valve
Engine
ECU Controller SPV–
IJf
EDU
147EG126
Operation
The battery voltage is increased by the DC/DC converter. A voltage of approximately 150V is applied to
the spill control valve in accordance with the IJt signal received from the engine ECU. Also at this time,
the injection verification signal (IJf) is sent to the engine ECU.
LAND
CRUISER
NCF147E

6. Fuel Injection Volume Control

D Based on sensor signals, the engine ECU controls the fuel injection volume by calculating the fuel injec-
tion volume that is appropriate for the engine condition.
D On the manual transmission model, the engine’s output is limited in 1st gear.
Engine Speed Signal
Spill EDU
Control
Valve
Injection Pump
Accelerator Pedal Position Signal
Intake Manifold Pressure Signal
Engine Intake Air Temp. Signal
ECU Fuel Temp. Signal
Water Temp. Signal
Vehicle Speed Signal
1st Gear Position Signal
Fuel Pump Calibration

Unit Signal
147EG106
Function of Engine ECU

The engine ECU calculates the basic injection volume based on the throttle opening and engine speed, and
the maximum injection volume for the engine condition. The two injection volumes are then compared, and
the lesser of the two is selected. A correction value, which is obtained via the correction resistors, is added
to that injection volume, thus determining the final injection volume.
1) Basic Injection Volume

Determined in accordance with the throttle opening and the engine speed.
2) Maximum Injection Volume

Based on the signals received from the sensors, correction values are added to the theoretically required
injection volume (basic maximum injection volume) to determine the maximum injection volume during
engine operation.
a. Basic Maximum Injection Volume

Determined in accordance with the engine speed.
b. Intake Manifold Pressure Correction

Corrects the basic maximum injection volume in accordance with the intake manifold pressure. The
higher the intake manifold pressure becomes, the larger the injection volume becomes.
LAND
CRUISER
NCF147E

c. Intake Air Temperature Correction

Corrects the variance in the air-fuel ratio that is created by the difference in the density of the intake
air in accordance with the intake air temperature. The higher the intake air temperature becomes, the
smaller the injection volume becomes.
d. Fuel Temperature Correction

Corrects the variance in the injection volume that is created by the difference in the density of the fuel
in accordance with the fuel temperature. The higher the fuel temperature becomes, the smaller the injec-
tion volume becomes.
e. Water Temperature Correction

The lower the engine coolant temperature, the greater the injection volume becomes in order to ensure
drivability immediately following cold-starting.
3) Starting Injection Volume Control EG

Determines the fuel injection volume during starting in accordance with the starting signal and the water
temperature signal. When the engine is cold, the lower the coolant temperature becomes, the larger the
injection volume becomes.
4) Split Injection Control

Split injection is performed when starting the engine at extremely low temperatures in order to improve
the startability and greatly reduce the emission of white smoke and black smoke. In contrast to the ordi-
nary injection that occurs once, fuel is injected twice during split injection.
Spill Control Valve

0
Operating Current
Spill Control Valve Open
Cam Lift Injection
Nozzle Lift 0
147EG105
LAND
CRUISER
NCF147E

7. Fuel Injection Timing Control

Based on the signals received from the sensors, the engine ECU calculates and controls the fuel injection tim-
ing to be optimal for the engine condition.
Engine Speed Signal
Injection Pump
Accelerator Pedal Position Signal
Intake Manifold Pressure Signal
Engine Water Temp. Signal
ECU Intake Air Temp. Signal
Crankshaft Position Sensor Signal
Timing Control Valve Fuel Pump

Calibration
Unit Signal
147EG107

The engine ECU adds the corrections from the sensor signals to the basic fuel injection timing to calculate
the fuel injection timing that is optimal for the engine condition.
1) Basic Injection Timing

The basic injection timing is determined in accordance with the throttle opening and the engine speed.
2) Injection Timing Correction
a. Intake Manifold Pressure Correction

Corrects the basic fuel injection timing in accordance with the intake air pressure. The injection timing
is advanced when the intake air pressure is low in such the case as of high altitude areas.
b. Water Temperature Control

Corrects the basic fuel injection timing in accordance with the water temperature. The injection timing
is advanced when the water temperature is low.
3) Starting Injection Timing Control

The starting injection timing is determined in accordance with the starting signal, water temperature sig-
nal, and engine speed. The injection timing is advanced when the engine speed is high.
LAND
CRUISER
NCF147E

8. Idle Speed Control

D In this system, the engine ECU calculates the target engine speed in accordance with the engine condition,
and determines the fuel injection volume, thus controlling the idle speed rpm.
D Increases the idle speed during the operation of the power heater to improve its heating performance.
Engine Speed Signal
Spill EDU
Control
Valve
Injection Pump
Water Temp. Signal
Engine Accelerator Pedal Position Signal
Vehicle Speed Signal
ECU A/ C Switch Signal EG
Staring Signal
Fuel Temp. Signal
Power Heater Switch Signal
Fuel Pump
Calibration 147EG106
Unit Signal
1) Feedback Control
During idling, the feedback control controls the injection volume to achieve the target idle speed, if there
is a difference between the target idle speed calculated by the engine ECU and the actual idle speed.
2) Warm-Up Control
Controls the injection volume during warm-up to achieve an optimal fast idle speed in accordance with wa-
ter temperature.
3) Engine Speed Change Estimate Control

Immediately after the air conditioning switch is engaged, the idle speed can be affected by the change in
the load that is applied to the engine. To prevent this symptom, the engine speed-change estimate control
increases or decreases the injection volume before the idle speed changes.
9. Stable Idling Control

Immediately after the air conditioning switch is turned ON or OFF, the load applied to the engine changes,
causing the idle speed to fluctuate. To prevent this symptom, the engine speed-change estimate control in-
creases or decreases the injection volume before the idle speed fluctuates.
LAND
CRUISER
NCF147E

10. Cruise Control

In the previous cruise control system, the cruise control actuator moved the adjusting lever to control the ve-
hicle speed. On this model, however, the injection volume is controlled in accordance with the instructions
received from the cruise control computer that is integrated in the engine ECU in order to control the vehicle
speed.
11. Intake Air Control

When the engine is stopped, the intake air control system closes the intake shutter that is provided in the intake
pipe to shut off the intake air and reduce vibrations.
" System Diagram A
Actuator
Intake Shutter VSV

From Vacuum Pump
Atmospher
Engine
ECU Ignition Switch
147EG104
Operation
When the engine is stopped, the engine ECU turns the VSV ON to introduce air to the actuator, thus closing
the intake shutter.
LAND
CRUISER
NCF147E

12. Intake Heater Control

Applies current to the intake heater during cold-starting to increase the intake air temperature and improve
the engine’s startability.
" System Diagram A
Intake Heater
Relay Intake Heater
Indicator Lamp
ST ON
Intake Ignition
Heater Switch
Engine ECU
EG
Water Temp.
Sensor Battery
147EG109
Operation
D When the engine coolant temperature is below 40_C, turning the ignition switch ON causes the intake
heater relay to turn ON, allowing the intake heater to operate. The intake heater operates until the engine
coolant temperature becomes higher than 40_C, or the maximum of 90 seconds.
D At the same time, the intake heater indicator lamp is illuminated in accordance with the engine coolant
temperature (maximum 10 seconds).
LAND
CRUISER
NCF147E

13. EGR Control

In the EGR control system, the engine ECU controls the vacuum regulating valve to recirculate an appropri-
ate amount of exhaust gas to the combustion chamber in accordance with the engine condition. This results
in slower combustion rate, lower combustion temperature, and reduced NOx emissions.
" System Diagram A
Intake Atomosphere
VSV
From Vacuum Pump
Vacuum
Regulating
Valve
Accelerator Pedal
Position Signal
Exhaust Engine
Engine Engine Speed Signal
ECU Water Temp. Signal
Intake Manifold
Pressure Signal
147EG110
Construction
1) Vacuum Regulating Valve

Controls the vacuum that is applied by the To
vacuum pump to the EGR valve in accordance From
EGR
Vacuum
with the signals from the engine ECU. Valve
Pump
Atmosphere
141EG51
LAND
CRUISER
NCF147E

2) VSV
Releases the vacuum that is applied to the
EGR valve when the EGR is OFF in order to
To EGR Valve
improve the response when the valve is
closed.
Atmosphere
147EG115
3) EGR Valve EG
D Using the vacuum from the vacuum regulat-
ing valve, the EGR valve opens and closes
the valve to introduce exhaust gas into the in- EGR Valve
take manifold.
D By providing the EGR valve in the intake
passage, the various parts in the EGR valve
are cooled by the intake air, thus enabling
EGR control at higher load conditions.
EGR Gas
Intake Air
147EG111
EGR Valve EGR Valve
1HD-FTE Engine Ordinary Engine
147EG112
LAND
CRUISER
NCF147E

Operation
1) Based on the signals from the sensors, the engine ECU applies duty control to the current that is applied
to the vacuum regulating valve, thus regulating the vacuum that is applied to the EGR valve. Thus, the
EGR valve opening is controlled to provide the volume of EGR gas that is appropriate for the engine
condition.
2) The EGR function is stopped under the conditions given below to ensure drivability and to reduce diesel
smoke.
D The water temperature is low.
D The vehicle is driven under high load condition.
D During deceleration (The EGR operates at idle)
14. Engine Immobiliser System

The engine immobiliser system has been designed to prevent the vehicle from being stolen. This system uses
a engine ECU that stores the ID code of the authorized ignition key. If an attempt is made to start the engine
using an unauthorized key, the engine ECU to prohibit fuel delivery effectively in order to disable the engine.
For details, see page 277 in the Engine Immobiliser system section.
15. Diagnosis
D If the engine ECU detects any problem with a sensor or an electrical circuit, it turns ON the CHECK EN-
GINE lamp in the combination meter to inform the driver. In addition, the malfunction code will be stored
in memory.
D An M-OBD (Multiplex On-Board Diagnostic) System has been adopted to improve serviceability.
The operation of the M-OBD system is basically the same as the 1FZ-FE engine.
For details, see page 60.
LAND
CRUISER
NCF147E

FTE Vs FT

Uploaded by

Copyright:

Available Formats

FTE Vs FT

Uploaded by

Document Information

Original Description:

Original Title

Copyright

Available Formats

Share this document

Share or Embed Document

Sharing Options

Did you find this document useful?

Is this content inappropriate?

Copyright:

Available Formats

FTE Vs FT

Uploaded by

Copyright:

Available Formats

What are the major differences between the 1HD-FTE and 1HD-FT engines?

What are the major differences between the 1HD-FTE and 1HD-FT engines?

What systems have been improved in the 1HD-FTE engine compared to the 1HD-FT engine?

What systems have been improved in the 1HD-FTE engine compared to the 1HD-FT engine?

108 ENGINE – 1HD-FTE ENGINE

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

JENGINE SPECIFICATIONS AND PERFORMANCE CURVE

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

1. Cylinder Head Cover

Blowby Gas Flow

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

3. Cylinder Head Gasket

Bead Around Bore

Bead Around Water Hole Folded

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

Crankshaft Position Sensor

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

2. Rocker Arm Shaft

Rocker Arm No.2

3. Rocker Arm and Valve

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

4. Timing Gear Train

Camshaft Timing Pulley No.1

Idler Gear Injection Pump

Oil Pump Power Steering

Dual Oil Pump Vacuum Pump

Crankshaft Timing Gear 147EG62

147EG64 Timing Belt Cover

Timing Gear Case

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

MAIN OIL HOLE

OIL PUMP PISTON

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

2. Oil Pan and Oil Strainer

Oil Pan Cover Oil Level Sensor

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

" Oil Filter Element A

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

Radiator Cylinder Block

Water Inlet Thermostat Water Pump

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

Temperature of Air Passing !

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

Construction and Operation

Engine Speed Coolant Temp.

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

JINTAKE AND EXHAUST SYSTEM

Rubber Steel Foam

Layered Washer Portion Foam Rubber Portion 147EG74

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

Please purchase PDF Split-Merge on www.verypdf.com to remove this watermark.

Clamp Type Joint

Catalytic Converter 147EG89

Exhaust Pipe Exhaust Pipe

Ball Joint 147EG58 Connecting Exhaust Pipe 156EG06