Safety Precautions Cautions

• Be sure to read through the instruction manual before using the battery. Measures to prevent minor injury and / or damage to property
• Keep the instruction manual near at hand for future reference. • Do not store the battery in a high temperature environment such as inside sun-
heated vehicles, or intense direct sunlight. Otherwise the temperature of the
Danger battery may increase, thus causing leakage of electrolyte, fire or explosion.
• Be sure to use an exclusive battery charger to charge the battery, or charge
Measures to prevent serious injury or death it while observing charging conditions specified by Century Yuasa Batteries.
• Be sure to ventilate the chamber where the battery is used so that the Otherwise the battery may not charge fully, leakage of electrolyte, heating,
hydrogen concentration is kept at 0.2% or lower. Do not install the battery explosion, performance deterioration, or decreased service life may result.
in an enclosed space. The battery may generate hydrogen gas, thus causing • Do not install the battery into equipment with an enclosed structure. Otherwise
ignition or explosion. the equipment may be damaged or personal injury may result.
• Do not short-circuit the positive (+) terminal and the negative (-) terminal of the • Do not install the battery in a place that may be subject to water immersion.
battery. If using metallic tools such as wrenches or spanners ensure they are Otherwise electric shock or fire may result.
insulated with an insulating material. Otherwise burns, leakage of electrolyte, • Observe the following service temperature range of the battery. Otherwise
fire or explosion may result. performance deterioration, reduction of service life, damage, or deformation of
• Do not heat the battery, use near flames or other hot objects such as the battery may result.
transformers. Otherwise leakage of electrolyte, fire or explosion may result. • Discharge: -15ºC to +50ºC Charge: -15ºC to +45ºC Storage: -15ºC to +45ºC
• The battery contains poisonous diluted sulfuric acid. If the battery is damaged • Be sure to perform periodic inspections of the battery at intervals specified by
and electrolyte is attached to skin or clothing, immediately wash it off with the local fire law or other regulations. Correct the items that do not conform to
large amounts of water. If it gets into eyes, wash with clean tap water and the description of the instruction manual. Otherwise damage or burnout of the
immediately seek medical treatment. battery may result.
• Use only a damp cloth to wipe the battery. Using a dry cloth or duster may • Be sure to keep the discharging current of the battery lower than the maximum
cause a build up of static electricity, thus resulting in an explosion. value specified in the specification. Otherwise leakage of electrolyte, heating or
explosion may result.
Warning • Do not use the battery in places subjected to excessive dust. Otherwise short-
Measures to prevent death, serious injury or minor injury circuit of the battery may result. (If it is used in a dusty location, check the
• Do not disassemble, modify or damage the battery. status of the battery periodically.)
• Be sure to replace the battery before the replacement period specified on the • Install the battery according to the relevant local fire law, or other regulations,
expiry label or in the instruction manual. Otherwise leakage of electrolyte, fire if any.
or explosion may result. • Be sure to allow the distance described in the specification or drawing to be
• Be sure to check the polarity (+, -) when making connections. Connections to maintained while installing the battery. Otherwise a failure of the battery or
reverse polarities may result in fire or damage to the charger. accident may occur. The distance to be observed may be governed by local
• Do not use the battery if visible defects are present, such as corrosion of law.
terminals, liquid leakage, or deformation of the battery container. Otherwise • Be sure to perform periodic inspections of the battery according to the
leakage of electrolyte, fire or explosion may result. description in the instruction manual. If applicable law exists, abide by the law
in performing inspections. Contact us for inspection contract or inspection
procedures.
• The battery requires electrical work to be performed by experts.
• Do not wet the battery with water or seawater. Otherwise damage of the
battery, fire, or corrosion of the terminals or connecting boards may result.

YUASA – UXL SOLAR SERIES

Head Office Enquiries within Australia

37 – 65 Cobalt Street ph 1300 364 877
Carole Park Queensland 4300 fax 1300 364 329
ph +61 7 3361 6161 Enquiries within New Zealand
fax +61 7 3361 6166
ph 0800 236 8879
www.centuryyuasa.com.au fax +64 9 978 6677
www.yuasa.com.au

An affiliated business of the GS Yuasa Corporation, CenturyYuasa has an 80+ year history of supplying a range of stored energy solutions to the
Australian market. An established network of sales and distribution offices throughout Australia and New Zealand has seen the business gain
the trust and respect from its customers by focusing on quality products and exceptional customer service.

The portfolio within CenturyYuasa includes a wide range of stored energy products and services, as well as identifiable brands and unique
technologies for the automotive, materials handling and standby power applications. Directly maintaining and operating three manufacturing
centres in Australia and employing some 650 people, CenturyYuasa continues to be Australia’s enduring manufacturer of stored energy products.
YU303-773b
 YUASA – UXL Solar Series

Performance Data
The Yuasa Ultra Extended Life series of Solar Valve Regulated Lead Acid Wide Operating Temperature Range Constant current (Amps per cell) discharge at 25°C
(VRLA) batteries have been trusted in solar powered telecommunication Designed to withstand a wide operating temperature range, from Hours
applications since mid 1990’s. The extra heavy duty grids, made from -15ºC to +45ºC, the UXL Solar batteries can also tolerate up to +55ºC 24 48 72 100 120 192 240
unique lead-calcium alloys, provide high resistance against corrosion. in some cases.* UXL240S-2 8.70 4.40 3.00 2.21 1.84 1.17 0.95
The UXL Solar series provide a long and reliable service life for shallow

1.85 Vpc
UXL360S-2 13.00 6.58 4.50 3.31 2.75 1.75 1.43
cyclic* applications normally encountered in solar powered systems. Low Maintenance Operation UXL600S-2 21.70 10.98 7.50 5.52 4.60 2.92 2.38
Due to the Yuasa’s sealed construction and the recombination of gases UXL1200S-2 43.30 21.96 15.00 11.04 9.20 5.80 4.75
Long Design Life
within the cell, the battery is almost maintenance free.
The expected design life is seven years in float cyclic applications at 25°C Watts per cell at 25°C
when operated in accordance to the manufacturer’s specifications. Operation in any Orientation
Hours
The combination of sealed construction and Yuasa’s unique electrolyte 24 48 72 100 120 192 240
Sealed Construction suspension system allows operation in any orientation, with no loss of UXL240S-2 17.20 8.70 5.93 4.37 3.64 2.31 1.88
Yuasa’s unique construction and sealing technique ensures no electrolyte performance or concern of electrolyte leakage (Excluding continuous

1.85 Vpc
UXL360S-2 25.70 13.05 8.90 6.55 5.46 3.47 2.82
leakage from case or terminals. use in an inverted position). UXL600S-2 43.00 21.75 14.83 10.92 9.09 5.78 4.70
UXL1200S-2 85.70 43.50 29.66 21.85 18.19 11.57 9.39
Electrolyte Suspension System Separators
All UXL batteries utilise Yuasa’s unique electrolyte suspension system, The separators used are made from a microfibre glass mat material
retaining the electrolytes in the separator material. which provide physical insulation between the plates, thus preventing 3 hour rate to 1.85 Vpc is mainly used for capacity discharge testing on site
inter-plate short circuits and significantly reducing the shedding of the by technicians (commissioning or maintenance)
Valve Regulated Design active material. Customers should use 1.85 Vpc as the cut-off voltage
The batteries are equipped with a low pressure venting system % DoD No. of Cycles
which releases excess gas and automatically reseals in the event of Recyclable Materials used in Battery
5 3000
gas build up in the battery. Note that on no account should the battery All Yuasa lead acid batteries can be recycled. 10 2400
be charged in a sealed container. The design of Yuasa’s UXL batteries 15 2050
*Contact Century Yuasa for information specific to your application
incorporates oxygen recombination reactions to eliminate the need 20 1700
to replenish with water.

UXL240S-2 UXL360S-2 UXL600S-2 UXL1200S-2

Applications
Terminal Type - M10
Yuasa UXL Solar batteries are suitable for Terminal Type - M10 Terminal Type - M10 Terminal Type - M10
_3
150 + _3
170 + 27.5 171±3 471±3
all cyclic applications including: _3
106 + _3
170 + 241±3 171±3
10
27.5
27.5
30 10
• Telecommunications 10 10
11

15
11
• Utilities 11

15
15
11
15

_3
_3
_3
_3

362±3
330±3
330 +

362±3
330±3
362 +
362+
330+

32
• Data Acquisitions Systems

32
32
32

• Marine Equipment
• Fire and Security Systems
• Emergency Lighting Charging:
• Lighting
Terminal
Terminal Type Type - M10
– M10 _3
106 + _3
170 +

30
10

11

15

_3
_3
362+
330+
General Specifications

32
Nominal Capacity Dimensions (±3mm)
Battery Nominal Voltage (V) Weight (Kg)
C100 (Ah)* Width Depth Height Overall Height
UXL240S-2 2 240 106 170 330 362 16
UXL360S-2 2 360 150 170 330 362 24
UXL600S-2 2 600 171 241 330 362 38
UXL1200S-2 2 1200 171 471 330 362 76

*End voltage 1.80 Vpc @ 25°C

Terminal Type - M10

27.5 171±3 471±3