Scribd Logo
Upload

Welcome to Scribd!

  • 4K views

    Huawei AR 160 Series Configuration.

    Uploaded by

    Ojijo Kevin
    The document provides step-by-step instructions for installing and configuring an AR device for connectivity. It details the required materials, types of AR devices, and how to set up the physical installation, network interfaces, routing, security, management, and wireless access point functionality.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd

    Huawei AR 160 Series Configuration.

    Uploaded by

    Ojijo Kevin
    4K views15 pages
    The document provides step-by-step instructions for installing and configuring an AR device for connectivity. It details the required materials, types of AR devices, and how to set up the physical installation, network interfaces, routing, security, management, and wireless access point functionality.

    Original Description:

    Huawei AR 160 Series Configuration

    Copyright

    © © All Rights Reserved

    Available Formats

    DOCX, PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    The document provides step-by-step instructions for installing and configuring an AR device for connectivity. It details the required materials, types of AR devices, and how to set up the physical installation, network interfaces, routing, security, management, and wireless access point functionality.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    4K views15 pages

    Huawei AR 160 Series Configuration.

    Uploaded by

    Ojijo Kevin
    The document provides step-by-step instructions for installing and configuring an AR device for connectivity. It details the required materials, types of AR devices, and how to set up the physical installation, network interfaces, routing, security, management, and wireless access point functionality.

    Copyright:

    © All Rights Reserved
    Download as DOCX, PDF, TXT or read online from Scribd
    Download as docx, pdf, or txt
    of 15

    18/3/2017

    AR HUAWEI PRESENTATION.

    STEP 1: PHYSICAL INSTALLATION

    Material required.

     AR
     Fiber Patchcode at least a pair
     Fiber optical cable
     Sfp atleast a 2
     FAT
     Flex conduit
     Trunking

    Types of AR 161F,169FW,169FVW

    FRONT PART

    BACKPART

    SFP
    18/3/2017

    We have two types 15km sfp (fast ethernet port ) and 10km(gigaport)

    Optical patch code

    Types of patchcode

    LC-LC

    SC-SC
    18/3/2017

    LC-SC

    Example of FAT

    Example of at used at client side


    18/3/2017

    Example of safaricom cabinet


    FAT

    SAFARICOM CABINET

    EXAMPLE OF AN FAT AT BS END


    18/3/2017

    SWITCH

    Example of a switch Optical switch.


    18/3/2017

    Basic configuration

    http://filehippo.com/download_putty/
    18/3/2017

    Login
    By default this are the logins;

    #
    Username:admin
    Password:Admin@huawei
    #

    Assigning the router a name.

    #
    Router# sysname XYZ
    #

    Configuring logins

    #
    aaa
    authentication-scheme default
    authorization-scheme default
    accounting-scheme default
    domain default
    domain default_admin
    local-user admin password (prompt to enter password,confirm and enter old password)

    local-user admin privilege level 15


    local-user admin service-type telnet http
    #

    New password:Admin@123
    Confirm new password:Admin@123
    Old password:Admin@huawei
    18/3/2017

    Configuring telnet,Con port


    Con port,telnet

    #
    user-interface con 0
    authentication-mode password
    set authentication password “password”

    user-interface vty 0 4
    authentication-mode password
    user privilege level 15
    set authentication password “password”
    #

    Will prompt you to password and confirmation

    Password:Admin@123

    BRIDGE
    Initial mode
    #
    [Company_XYZ] Bridge 1
    #

    use crtl z to exit the bridge mode.

    Configuring the management port.


    On interface GigabitEthernet0/0/0
    #
    interface GigabitEthernet0/0/0
    undo portswitch
    bridge 1
    description Connection_to_Router_Gi0/0
    #
    18/3/2017

    WAN PORT
    While using optical cable you need to enable combo port

    #
    interface GigabitEthernet0/0/4
    combo-port fiber
    #

    configurating management ips and vlan

    TES provide ips,vlan,gateway and subnet

    Management 10.143.110.10
    Subnet mask of 255.255.255.240
    /28:
    255.255.255.248
    /29:
    Vlan: 708
    Management 10.143.110.9
    gateway:

    Bridge the interface if AR is being used as a bridge

    Management ips on port 4

    #
    interface GigabitEthernet0/0/4.708
    description Management_Interface
    dot1q termination vid 708
    ip address 10.143.110.10 255.255.255.240
    #

    Bridge port 4 – After calling provisioning


    interface GigabitEthernet0/0/4.768
    bridge 1
    description service_subinterface
    dot1q termination vid 768
    18/3/2017

    Enabling snmp .
    Enables TES to monitor link and also on orion.

    #
    snmp-agent local-engineid 800007DB0304F9389B8C6C
    snmp-agent community read
    %@%@)(_HTpV@K2NbXD15MWM0,M4g}Zga=|9VhUJ$1":&b"@IM4j,xk;d=4Q_I*"RjoA2N{IE4s,M%
    @%@ mib-view iso-view
    snmp-agent sys-info version v2c v3
    snmp-agent target-host trap-paramsname 10.21.0.12 v2c securityname
    %@%@Eg&]Sw(h^HBnBx(qDAI+,Mvi%@%@
    snmp-agent target-host trap-paramsname 10.25.6.12 v2c securityname
    %@%@h!/WXII~u8H|swW2Crt#,M%e%@%@
    snmp-agent mib-view iso-view include iso
    snmp-agent
    #

    Gateway configuration
    #
    ip route-static 0.0.0.0 0.0.0.0 10.143.110.09 - management gateway
    #
    18/3/2017

    AR as router

    NOTE:At this point you will not do the bridging

    Provisioning team will provide IPS,vlan and subnet of /30.

    Example: Network 197.248.113.136/30

    Ips 197.248.113.118
    Gateway 197.248.113.117
    Subnet 255.255.255.252
    Vlan 768

    On this interface you do not bridge this interface


    #
    interface GigabitEthernet0/0/4.768
    description SFC_INTERNET
    dot1q termination vid 768
    ip address 197.248.113.118 255.255.255.252
    nat outbound 2001 - no should be specified at acl,translate wan ips to lan
    #

    #
    ip route-static 0.0.0.0 0.0.0.0 197.248.113.117 preference 10 - internet
    #

    Access control list


    #
    acl number 2001
    rule 0 permit source 192.168.1.0 0.0.0.255
    #
    18/3/2017

    Enabling DNS
    Safaricom dns

    #
    dns resolve
    dns server 41.203.208.18
    dns server 41.203.208.19
    dns server 41.203.208.88
    #

    Enable DHCP
    Establishes dhcp pool,this will depend if company requires dhcp to be broadcast by the router

    #
    dhcp enable
    #
    #
    dhcp server group Company_xyz - specifies companys pool server name
    dhcp-server 192.168.1.1 0
    gateway 192.168.1.1 - default router network
    dns-list 41.203.208.18 41.203.208.19 41.203.208.88 - safaricom dns
    #

    PING TEST
    You can use command prompt and in the router
     PING GATEWAY

     PING INTERNET
    18/3/2017

     PING DNS

     SPEEDTEST

    On browser: type
    www.speedtest.net
    18/3/2017

    Configuring wifi

    Login using browser: 192.168.1.1

    Username: admin
    Password: Admin@123

    Usually it’s a graphical user mode


    Select : LAN
    WLAN - configure SSID
    - Configure password

    Example of an AR webpage
    18/3/2017

    Configuration of wifi

    You might also like