Scribd Logo
Upload

Welcome to Scribd!

  • 182 views

    C7 ACERT 205bkW

    Uploaded by

    sheron
    CAT C7

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    C7 ACERT 205bkW

    Uploaded by

    sheron
    182 views5 pages
    CAT C7

    Original Title

    C7_ACERT_205bkW

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    CAT C7

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    182 views5 pages

    C7 ACERT 205bkW

    Uploaded by

    sheron
    CAT C7

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 5

    C7 ACERT™

    Industrial Engine
    Tier 3/Stage IIIA
    205 bkW/275 bhp @ 2200 rpm

    CAT® ENGINE SPECIFICATIONS


    I-6, 4-Stroke-Cycle Diesel
    Bore......................................................110.0 mm (4.33 in)
    Stroke.....................................................127.0 mm (5.0 in)
    Displacement............................................... 7.2 L (442 in³)
    Aspiration...................................... Turbocharged ATAAC
    Compression Ratio......................................................17:1
    Rotation (from flywheel end).............. Counterclockwise
    Lube Oil System (refill)........................ 28 L (7.4 U.S. gal)
    Weight, Net Dry (approximate kg, lb).. 588 kg (1296 lbs)

    Image shown may not reflect


    actual engine

    FEATURES
    Emissions Full Range of Attachments
    Meets U.S. EPA Tier 3, EU Stage IIIA emission Wide range of bolt-on system expansion
    requirements. attachments, factory designed and tested.

    Worldwide Supplier Capability Unmatched Product Support Offered Through


    Caterpillar Worldwide Caterpillar Dealer Network
    - Casts engine blocks and heads More than 1,500 dealer outlets
    - Machines critical components Caterpillar factory-trained dealer technicians service
    - Assembles complete engine every aspect of your industrial engine
    - Factory-designed systems built at Caterpillar ISO 99.7% of parts orders filled within 24 hours
    9001:2000 certified facilities worldwide
    -Ownership of these manufacturing processes Caterpillar parts and labor warranty
    enables Caterpillar to produce high quality, Preventive maintenance agreements available for
    dependable product. repair before failure options

    Testing Scheduled Oil Sampling program matches your oil


    sample against Caterpillar set standards to
    Prototype testing on every model: determine:
    - proves computer design - internal engine component condition
    - verifies system torsional stability - presence of unwanted fluids
    - functionality tests every model - presence of combustion by-products
    Every Caterpillar engine is dynamometer tested
    under full load to ensure proper engine Web Site
    performance. For all your industrial power requirements, visit
    www.cat-industrial.com.

    16 April 2012 10:35 AM


    C7 ACERT™
    Industrial Engine
    Tier 3/Stage IIIA
    STANDARD ENGINE EQUIPMENT 205 bkW/275 bhp @ 2200 rpm

    Air Inlet System Fuel System


    Air to air aftercooled (ATAAC) HEUI™ injection
    Turbocharged Fuel filter, secondary (2 micron high performance)
    Fuel transfer pump
    Control System Fuel priming pump
    ACERT™ Technology
    Electronic governing, PTO speed control
    Programmable ratings
    Cold mode start strategy
    Automatic altitude compensation Lube System
    Power compensation for fuel temperature Crankcase breather
    Programmable low and high idle and total engine Oil cooler
    limit Oil filler
    Electronic diagnostics and fault logging Oil filter
    Engine monitoring system Oil pan front sump
    J1939 Broadcast (diagnostic and engine status) Oil dipstick
    ADEM™ A4 Electronic Control Unit (ECU) Oil pump (gear driven)

    Cooling System General


    Thermostats and housing, vertical outlet Paint, Caterpillar Yellow
    Jacket water pump, centrifugal Vibration damper
    Water pump, inlet Lifting eyes

    Exhaust System
    Exhaust manifold, dry
    Optional exhaust outlet

    Flywheels and Flywheel Housing


    SAE No. 1 Flywheel housing

    2 16 April 2012 10:35 AM


    C7 ACERT™
    Industrial Engine
    Tier 3/Stage IIIA
    PERFORMANCE CURVES 205 bkW/275 bhp @ 2200 rpm

    IND - C (Intermittent) - DM9222-01

    Torque Metric
    N•m

    Engine
    Power kW

    BSFC
    g/kW-hr

    Engine Speed - rpm

    Engine Speed Engine Power Torque N•m BSFC g/kW-hr Fuel Rate L/hr
    rpm kW
    2200 205 890 234.1 57.2
    2100 205 932 227.9 55.7
    2000 205 979 222.1 54.3
    1900 205 1030 218.5 53.4
    1800 205 1088 218.3 53.3
    1700 203 1140 214.5 51.9
    1600 198 1182 214.8 50.7
    1500 192 1222 215 49.2
    1400 184 1257 216.8 47.6
    1300 169 1241 211 42.5
    1200 146 1162 214.4 37.3
    1100 118 1024 218 30.7

    3 16 April 2012 10:35 AM


    C7 ACERT™
    Industrial Engine
    Tier 3/Stage IIIA
    PERFORMANCE CURVES 205 bkW/275 bhp @ 2200 rpm

    IND - C (Intermittent) - DM9222-01

    Engine English
    Torque
    lb•ft

    Engine
    Power bhp

    BSFC
    lb/bhp-hr

    Engine Speed rpm

    Engine Speed Engine Power Engine Torque BSFC lb/bhp-hr Fuel Rate
    rpm bhp lb•ft gal/hr
    2200 275 656 .385 15.1
    2100 275 687 .375 14.7
    2000 275 722 .365 14.3
    1900 275 760 .359 14.1
    1800 275 802 .359 14.1
    1700 272 841 .353 13.7
    1600 266 872 .353 13.4
    1500 257 901 .353 13.0
    1400 247 927 .356 12.6
    1300 227 915 .347 11.2
    1200 196 857 .352 9.9
    1100 158 755 .358 8.1

    4 16 April 2012 10:35 AM


    C7 ACERT™
    Industrial Engine
    Tier 3/Stage IIIA
    RATINGS AND CONDITIONS 205 bkW/275 bhp @ 2200 rpm

    IND - C (Intermittent) Intermittent service where Engine Performance Diesel Engines — 7 liter and
    maximum power and/or speed are cyclic (time at full higher All rating conditions are based on SAE J1995,
    load not to exceed 50%). inlet air standard conditions of 99 kPa (29.31 in. Hg)
    dry barometer and 25ºC (77ºF) temperature.
    Performance measured using a standard fuel with
    fuel gravity of 35º API having a lower heating value
    of 42,780 kJ/kg (18,390 btu/lb) when used at 29º C
    (84.2º F) with a density of 838.9 g/L.

    Engine Dimensions
    (1) Length 1052.7 mm (41.44 in) Note: Do not use for installation design.
    See general dimension drawings for
    (2) Width 758.2 mm (29.85 in) detail (Drawing # 2835788 ).
    (3) Height 1032.1 mm (40.63 in)

    Performance Number: DM9222-01 © 2012 Caterpillar


    Feature Code: C07DI03 Arr. Number: 2903976 All rights reserved.
    Materials and specifications are subject to change without notice. The International System of Units (SI) is used in this publication.
    16302761 CAT, CATERPILLAR, their respective logos, "Caterpillar Yellow," the
    "Power Edge" trade dress, as well as corporate and product identity
    used herein, are trademarks of Caterpillar and may not be used
    without permission.

    You might also like