Scribd Logo
Upload

Welcome to Scribd!

  • 204 views

    175 012500 PDF

    Uploaded by

    Abu Anas M.Salaheldin
    This document outlines inspection and testing requirements for concrete mortar lining of internal pipe surfaces according to Saudi Aramco specifications. It lists specific tests and inspections that must be performed or witnessed by an inspector at various stages of the lining process, including material receiving, mixing, mortar testing, surface preparation, thickness checks, curing, and final inspection. Tests are to be done according to referenced Saudi Aramco and AWWA standards to ensure quality.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    175 012500 PDF

    Uploaded by

    Abu Anas M.Salaheldin
    204 views1 page
    This document outlines inspection and testing requirements for concrete mortar lining of internal pipe surfaces according to Saudi Aramco specifications. It lists specific tests and inspections that must be performed or witnessed by an inspector at various stages of the lining process, including material receiving, mixing, mortar testing, surface preparation, thickness checks, curing, and final inspection. Tests are to be done according to referenced Saudi Aramco and AWWA standards to ensure quality.

    Original Title

    175-012500.pdf

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document outlines inspection and testing requirements for concrete mortar lining of internal pipe surfaces according to Saudi Aramco specifications. It lists specific tests and inspections that must be performed or witnessed by an inspector at various stages of the lining process, including material receiving, mixing, mortar testing, surface preparation, thickness checks, curing, and final inspection. Tests are to be done according to referenced Saudi Aramco and AWWA standards to ensure quality.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    204 views1 page

    175 012500 PDF

    Uploaded by

    Abu Anas M.Salaheldin
    This document outlines inspection and testing requirements for concrete mortar lining of internal pipe surfaces according to Saudi Aramco specifications. It lists specific tests and inspections that must be performed or witnessed by an inspector at various stages of the lining process, including material receiving, mixing, mortar testing, surface preparation, thickness checks, curing, and final inspection. Tests are to be done according to referenced Saudi Aramco and AWWA standards to ensure quality.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 1

    INSPECTION & TESTING REQUIREMENTS REVISION: 05/09/2011 CODE NUMBER: PAGE:

    SAUDI ARAMCO FORM-175 REPLACES: 03/01/1998 IR012500 1 of 1


    SCOPE: CONCRETE MORTAR LINING: For Internal Surfaces of Line Pipe and Fittings.

    TEST AND INSPECTION PER: 01-SAMSS-005, and Specifications As Noted Below.

    (1) VISUAL INSPECTION WITNESSING BY INSPECTOR (Note 1)


    (2) CERTIFICATES / RECORDS TO BE CHECKED BY INSPECTOR
    (3) CERTIFICATES / DATA TO BE PROVIDED BY VENDOR / SUPPLIER / MANUFACTURER
    0010
    0010
    *** X
    Pre-Fabrication/Production Requirements
    Quality Program Procedure
    Specification Details / Notes:
    Per 01-SAMSS-005 Sec IV

    0020 X Material receiving & Handling 01-SAMSS-005, 01-SAMSS-024, & AWWA C205. Random
    sampling for verification and suitability.

    0030 X Reinforcement Wire, Portland cement and Curing compound. 01-SAMSS-005 & AWWA C205.

    0020
    0010
    ***
    X
    In process inspection & test requirement
    Mixing ratio/ slump test
    Specification Details / Notes:
    01-SAMSS-005 & AWWA C205

    0020 X Mortar Testing : Sand, Water and Cement Mortar Per 01-SAMSS-005 Table 1. To be performed before and
    during lining operations. Frequency can increase as
    determined by the COMPANY.

    0030 X Surface Preparation 01-SAMSS-005 & SIS-05-59-00: Cleaned in accordance with


    St2.

    0040 X Thickness 01-SAMSS-005 & AWWA C205.

    0050 X Mortar Lining Test Cylinders 01-SAMSS-005 & AWWA C205.

    0030
    0010
    ***
    X
    Final inspection & test requirements
    General Visual inspection, End cap and Curing process
    Specification Details / Notes:
    01-SAMSS-005 & AWWA C205.

    0020 X Handling, Loading & Stacking 01-SAMSS-005 01-SAMSS-024, & AWWA C205

    Notes:
    (1) May only be waived by the responsible Saudi Aramco, ASC, or AOC Inspection Offices.
    (2) See form SA-175 form (000003) for instructions on using this form.

    End of IR012500

    You might also like