Scribd Logo
Upload

Welcome to Scribd!

  • 292 views

    Add Info B-82974EN 01

    Uploaded by

    Charles Jacob
    This document provides additional information for an operator's manual for a FANUC robot controller. It adds a caution about properly setting the IP addresses for the two Ethernet ports on the R-30iA controller. Specifically, it states that each port must have an IP address with a different subnet in order to avoid alarms. It provides an example of a correct IP address configuration where port 1 has an IP on the 192.168.2.x subnet and port 2 uses the 192.168.1.x subnet.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Add Info B-82974EN 01

    Uploaded by

    Charles Jacob
    292 views3 pages
    This document provides additional information for an operator's manual for a FANUC robot controller. It adds a caution about properly setting the IP addresses for the two Ethernet ports on the R-30iA controller. Specifically, it states that each port must have an IP address with a different subnet in order to avoid alarms. It provides an example of a correct IP address configuration where port 1 has an IP on the 192.168.2.x subnet and port 2 uses the 192.168.1.x subnet.

    Original Description:

    jbnklj

    Original Title

    Add_info_B-82974EN_01

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides additional information for an operator's manual for a FANUC robot controller. It adds a caution about properly setting the IP addresses for the two Ethernet ports on the R-30iA controller. Specifically, it states that each port must have an IP address with a different subnet in order to avoid alarms. It provides an example of a correct IP address configuration where port 1 has an IP on the 192.168.2.x subnet and port 2 uses the 192.168.1.x subnet.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    292 views3 pages

    Add Info B-82974EN 01

    Uploaded by

    Charles Jacob
    This document provides additional information for an operator's manual for a FANUC robot controller. It adds a caution about properly setting the IP addresses for the two Ethernet ports on the R-30iA controller. Specifically, it states that each port must have an IP address with a different subnet in order to avoid alarms. It provides an example of a correct IP address configuration where port 1 has an IP on the 192.168.2.x subnet and port 2 uses the 192.168.1.x subnet.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    of 3

    ADDITIONAL INFORMATION

    FANUC Robot R-30iA / R-30iA Mate controller Ethernet Function


    OPERATOR'S MANUAL
    Adding Caution for setting IP address

    1. Type of applied technical documents

    Name FANUC Robot series R-30iA / R-30iA Mate controller


    Ethernet Function OPERATOR'S MANUAL
    Spec. No./Version B-82974EN/01-1

    2. Summary of Change

    New,Add,
    Applicable
    Group Name/Outline Correct,
    Date
    Delete

    Basic
    Setting up TCP/IP Add ASAP
    Function

    Optional
    Function

    Unit

    Maintenanc
    e Parts

    Notice Caution for setting IP address was added.

    Correction

    Other

    TITLE
    FANUC Robot series R-30iA / R-30iA Mate Ethernet Function

    OPERATOR'S MANUAL Adding caution for setting IP address

    DRAW.NO. B-82974EN/01-1 CUST.


    01 10.07.12 Someya Original Created

    SHEET
    EDIT. DATE DESIG. DESCRIPTION FANUC LTD 1/2
    Add the following description at the end of 2.4 Setting up TCP/IP
    Caution for setting IP address
    Each IP address for 2 Ethernet ports of R-30iA must be in network with different subnet.
    Different subnet means network address which determined by subnet mask is different.

    For example, network address is 192.168.1 and host address is 10 when subnet mask is
    255.255.255.0 and IP address is 192.168.1.10.
    "Host-179 IP Address mis-configuration" alarm will be asserted when IP address for 2 Ethernet ports
    has the same subnet.
    2 Ethernet ports of R-30iA are not able to use as Hub.
    R-30iA is not able to set 2 nodes for one network.

    Example of correct IP setup (In case, subnet is 255.255.255.0)

    External PLC
    Ethernet/IP Scanner

    CD38B CD38B CD38B


    CD38A CD38A CD38A 192.168.1.1

    Port #2: 192.168.1.2 Port#2: 192.168.1.3 Port #2: 192.168.1.4


    192.168.2.1
    Port #1: 192.168.2.2 Port #1: 192.168.2.3 Port #1: 192.168.2.4

    * Port #1 and Port #2 are physically assigned to CD38A and CD38B.

    TITLE
    FANUC Robot series R-30iA / R-30iA Mate Ethernet Function

    OPERATOR'S MANUAL Adding caution for setting IP address

    DRAW.NO. B-82974EN/01-1 CUST.


    01 10.07.12 Someya Original Created

    SHEET
    EDIT. DATE DESIG. DESCRIPTION FANUC LTD 2/2

    You might also like