USERS MANUAL

MANUEL DE LUTILISATEUR
W4207
HD Video Monitor
Moniteur HD

www.westinghousedigital.com

Westinghouse Digital Electronics SE-UM-4204-0601

Santa Fe Springs, CA
Contacting Westinghouse Digital

English
Log on to: www.westinghousedigital.com
Contact Westinghouse Customer Service at (866) 287-5555 or write us at
[email protected]

Owners Record
The model and serial numbers are located @ the back of the
Monitor. Keep a record of the numbers in the spaces provided
below. Ref to them whenever you call upon your Westinghouse
Digital dealer regarding this product.

Model No.____________________________

Serial No.____________________________
CONTENTS
1. PRODUCT SAFETY
SAFETY GUIDELINES ........................................................................2
PRODUCT SAFETY INSTRUCTIONS .....................................................3

English
2. INSTALLATION
PACKAGE CONTENTS........................................................................4
FRONT VIEW OF THE W4207 HD MONITOR ........................................5
REAR VIEW OF THE W4207 HD MONITOR .........................................5
SIDE VIEW OF THE W4207 HD MONITOR ...........................................6
REMOTE CONTROL...........................................................................8
INSTALLATION ..................................................................................9

3. OSD FUNCTION
OSD FUNCTION .............................................................................12
PICTURE .......................................................................................13
PC PARAMETERS ...........................................................................14
AUDIO ...........................................................................................15
PICTURE-IN-PICTURE .....................................................................17
GENERAL SETTINGS .......................................................................17

4. APPENDIX
TROUBLESHOOTING .......................................................................18
CLEANING THE W4207 HD MONITOR ..............................................20
SPECIFICATIONS ............................................................................20

ii
1 PRODUCT SAFETY

English

1
 1 PRODUCT SAFETY
Safety Guidelines
WARNING: This device must be operated with the original power supply, part number FSP273-4F04.

English
CAUTION: The power supply outlet should be located near the W4207 HD Monitor and should be easily
accessible. Always use the appropriate AC cord that is certified for your specific country. Some examples
are listed below:
USA..................UL Switzerland ..... SEV
Canada.............CSA Britain ............. BASE/BS
Germany..........VDE Japan ............... Electric Appliance Control Act

IMPORTANT NOTICE CONCERNING POWER CORD SELECTION

The specific power cord for this W4207 HD Monitor is enclosed and has been selected according to the
country of destination and must be used to prevent electric shock. Use the following guidelines if it is
necessary to replace the original cord set, or if the cord set is not enclosed. The female receptacle of the
cord set must meet IEC-60320 requirements and should look like Figure A1 below:

Figure A1 Figure A2

For the United States and Canada

In the United States and Canada the male plug is a NEMA5-15 style (Figure A2), UL Listed, and CSA
Labeled. For W4207 HD Monitors that are placed on a desk or table, only SJT type cord sets may be used.
For W4207 HD Monitors placed directly on the floor, type SVT or SJT cord sets may be used. The cord set
must be selected according to the current rating for the monitor. Please consult the table below for the
selection criteria for power cords used in the United States and Canada.

Cord Type Size of Conductors in Cord Maximum Current Rating of Unit

SJT 18 AWG 10 Amps
16 AWG 12 Amps
14 AWG 12 Amps
SVT 18 AWG 10 Amps
17 AWG 12 Amps

FCC Compliance Statement

This equipment has been tested and complies with the limits for a Class B digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and may
cause harmful interference to radio communications if not installed and used in accordance with the
instructions. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or video reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the W4207 HD Monitor and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the Westinghouse Service Center or an experienced technician for assistance.

FCC Warning
To assure continued FCC compliance, the user must use a grounded power supply cord and the
provided shielded video interface cable with bonded ferrite cores. If a BNC cable used, use only a
shielded BNC (5) cable. Also, any unauthorized changes or modifications not expressly approved by
Westinghouse Digital will void the user's authority to operate this device.

2
 1 PRODUCT SAFETY
Product Safety Instructions
Follow and obey all warnings and instructions marked on the W4207 HD Monitor. For your
safety, please read all the safety and operating instructions before you operate the W4207

English
HD Monitor. Keep this users manual for future reference.

Important Safety Instructions

1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding type plug. A
polarized plug has two blades with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to a void injury from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of
time.
14. Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

Other Notices
Avoid exposing the W4207 HD Monitor to direct sunlight or high temperatures.
Avoid exposing the monitor to moisture or high humidity
Do not attempt repairs yourself. Your warranty does not cover repairs or attempted
repairs by anyone not authorized by the manufacturer
If your W4207 HD Monitor will not be used for a long period of time, unplug it and
remove the batteries from the remote control
Only use attachments/accessories specified by the manufacturer.
Avoid touching the screen. Skin oils are difficult to remove.
Never remove the rear cover. Your W4207 HD Monitor contains high-voltage parts.
You may be seriously injured if you touch them.
Always handle your LCD display with care when moving it.
If the monitor emits smoke, abnormal noise, or a strange odor, immediately turn it
off and contact the Westinghouse Service Center.

3
 2 INSTALLATION
Package Contents

Your product package includes:

English
42 Westinghouse LCD W4207 HD Monitor
Remote Control (with batteries)
Power Cord
Users Manual
Quick Connect Guide
Warranty Card

4
 2 INSTALLATION
Front View of the W4207 HD Monitor
Use the buttons on the right side of the W4207 HD Monitor or the buttons on the remote

English
control to display the On Screen Display (OSD) menu and adjust the options. The OSD
controls are defined in OSD Functions on page 16.

Power Indicator IR Receiver

Speakers

Rear View of the W4207 HD Monitor

5
 2 INSTALLATION
Side View of the W4207 HD Monitor

English
1. Menu Turn OSD Menu On or Off

Increase/Decrease sound volume or

2. Volume + / - adjust a highlighted control while in the
OSD Menu.
3. T/S Highlight a control while in the OSD
( OSD Selection) Menu.

Select active video input or choose a

4. Input
selection while in the OSD menu.

5. Power Button Turn Power On or Off

6
2 INSTALLATION

English
1 SIDE CONNECTORS
1. HDMI
2 Connect to an external HDMI device such as a cable/satellite
receiver or DVD player.

2. DVI (HDCP) / Audio (Left / Right)

Connect to an external DVI-HDCP device such as a DVD,
3 4 cable/satellite receiver, or computer.

5 3. S-Video
Connect to an external video device such as a VCR.
6
4. AV Video
Connect the composite video to an external video device
7 such as a VCR.

5. S-Video & AV Audio (Left / Right)

8 Connect an external audio source to this jack. This
connection supports either S-Video or AV input.

9 6. Audio Out (Left / Right)

Connect this output to an external audio amplifier.

7. Service Port
For Factory Use only.

8. VGA
Using a 15-pin VGA cable, connect to a computer

9. VGA Audio-In
Using a 3.5mm mini-jack cable, connect to the Audio out
(Green) on a computer.

10 11 10. YPbPr1 / Audio1 (Left / Right)

Connect the component video to an external video device
such as a DVD player or gaming system.

11. YPbPr2 / Audio2 (Left / Right)

Connect the component video to an external video device
such as a DVD player or gaming system.
12
12. AC-IN (Power)
Connect the power cord from AC-IN to a power source.

7
 2 INSTALLATION
Remote Control
Use the Remote Control to adjust your Westinghouse W4207 HD Monitor.

English
1. POWER: 23. DVI:
Switch the power on/off Switch to DVI source
2. MUTE: 24. Video:
Turn the sound on/off Switch directly to Video source
3. PIP: 25. S-Video:
Display Picture-In-Picture Switch directly to S-Video source
4. SWAP:
Switch PIP between main and sub-screen
pictures
5. BACKLIGHT:
Shortcut to backlight adjustment 1
6. SLEEP: 3
Set sleep timer 2 4
7. FAVORITE:
For use with Westinghouse HDTVs only. 5 6
8. OSD SUB-MENU SELECTION:
Select OSD sub-menu option directly by 7
number
9. VOL - / +:
Volume Up/Down adjustment
10. INPUT:
8
Scroll input source list
11. CH/SOURCET / S:
Source selection up/down
12. SCALING: 10
Set screen to STANDARD or FILL
13. MENU: 9 11
Turn OSD Menu on/off
14. EXIT: 12
Exit the OSD Menu 14
15. W / X: 13
OSD Menu control; adjust settings 16
16. T / S: 15
Navigate within OSD Menu 17
17. ENTER:
To choose a selection 18 19
18. EPG: 20 21
For use with Westinghouse HDTVs only.
19. INFO:
Display main/sub-screen picture source 22 23
20. PC:
Switch directly to PC source 24 23
25
21. HDMI:
Switch directly to HDMI source
22. YPbPr:
Switch to YPbPr1/YPrPr2 source
8
 2 INSTALLATION

Installation

English
1. Insert Remote Control Batteries

1) Remove the battery cover.

2) Insert the batteries corresponding to the (+) and () marks on the battery
compartment.

3) Re-attach the battery cover.

CAUTION:
Only use AAA batteries.
Do not mix new and old batteries. This may result in cracking or leakage, which may pose a
fire risk or lead to personal injury.
Insert batteries according to (+) and () markings. Inserting the batteries incorrectly may
result in cracking or leakage, which may pose a fire risk or lead to personal injury.
Dispose of used batteries in accordance with local laws and regulations.
Keep batteries away from children and pets.
When the remote control will not be used for an extended period, remove the batteries.

9
 2 INSTALLATION
2. Connect the W4207 HD Monitor to a computer
Connect a VGA or DVI cable and an audio cable to the back of the W4207 HD Monitor.

English
IMPORTANT: Before you begin, make sure all devices are turned off.
VGA CONNECTION: Connect an analog VGA cable from your computer VGA OUT
port to the W4207 HD Monitor VGA IN port. Connect a stereo mini cable from the
computers AUDIO OUT port to the VGA AUDIO IN port on the W4207 HD Monitor.

DVI CONNECTION: Connect a Digital DVI cable from your computer to the W4207
HD Monitor DVI port. Using a 3.5mm mini cable to RCA Red/White (Left/Right) audio
converter cable, connect the 3.5mm cable plug into the computers AUDIO OUT port
and the RCA Red/White cable plug into the DVI AUDIO IN port on the W4207 HD
Monitor.

3. Connect the W4207 HD Monitor to AV Devices

Connect one or all of the following compatible devices into the back of the W4207 HD
Monitor.
For Component Video input used the from manufacturer supplied Video cable.

4. Connect power cable and power on the W4207 HD Monitor

Connect the power cord to the back of the W4207 HD Monitor then to a properly
grounded AC outlet and press the Power button to turn on the monitor.

NOTE: The monitor will take a few seconds to power up.

10
 2 INSTALLATION

English
5. Turn on your computer
The W4207 HD Monitor will auto adjust to the resolution of the computer.

For the best picture quality, set the PC timing mode to 1366 X 768 at 60Hz, then turn
off and reboot the computer. Refer to your computers graphic card user guide for
questions on how to set this timing mode.

6. Turn on the cable box or satellite receiver

If using a DVI or HDMI connection, the cable box or satellite receiver will need to be
restarted to complete HDCP authentication to view the picture.

7. Select an input source for the W4207 HD Monitor using the OSD menu
or remote control

To display the change the input source, press the Input button on the right side of the
W4207 HD Monitor or the Input key on the remote control.

11
 3 OSD FUNCTION
On-Screen Display (OSD) Function
To display the OSD main menu, press the Menu button on the right side of the W4207 HD

English
Monitor or the MENU key on the remote control. Use the / arrow keys to scroll up and
down the OSD main menu. Press the 4 arrow key to select the desired OSD sub-menu.

Main Menu
Using the main menu, you can adjust the Picture, PC, Audio, PIP, and General Setting
parameters. To select a sub-menu option, use the / arrow keys on the right side of the
W4207 HD Monitor or on the remote control. Then use the 3/4arrow keys to adjust the
sub-menu setting. Finally, press the Menu button on the side of the W4207 HD Monitor
or the Exit button on the remote control to exit the OSD menu.

OSD Main Menu OSD Sub-Menu

Help Menu

12
 3 OSD FUNCTION
Picture

English
Function Name Function
1. Brightness Adjust the black level of the display.
2. Contrast Adjust the white level of the display.
3. Saturation Adjust the intensity of the colors.
4. Hue Adjust the color towards either red or green.
5. Color Temp Color temperature adjustment (Warm, Neutral, Cool)
6. Sharpness Adjust the clarity of the picture.
Set display to STANDARD or FILL

Adjusts the ratio between the width of the picture and the height
of the picture. A 16:9 picture will be displayed in its original
format.
7. Aspect Ratio Standard conventional format used for viewing 4:3
programs in their normal format.
Fill format that horizontally stretches 4:3 pictures to the
edge of the screen (some programs will be broadcasted
with black or gray bars on the top and bottom or sides of
the picture).
Adjust the intensity of the lamp that illuminates the W4207 HD
8. Backlight
Monitor.
9. Reset Reset the video settings to the factory default.

13
 3 OSD FUNCTION
PC Parameters (VGA Only)

English
Function Name Function
Automatically re-centers the image to the middle of the screen
1. Auto Adjust by synchronizing both vertical and horizontal refresh rate and
resolution.
2. Clock Clock adjustment
3. Phase Adjust the Phase control to eliminate horizontal streaking.
4. Position Adjust the horizontal and vertical position of the screen image.

14
 3 OSD FUNCTION
Audio

English
Function Name Function
1. Volume Volume adjustment
2. Bass Bass adjustment
3. Treble Treble adjustment
4. Balance Balance adjustment
5. Mute Turn audio On or Off
6. Speaker Select internal or external speakers
7. Reset Reset audio settings

15
 3 OSD FUNCTION
Picture-in-Picture

English
Function Name Function
Select display options:
1. Display Mode
Off, PIP, PBP, POP
Select main screen source:
2. Main Source
VGA, HDMI, DVI, Video, S-Video, YPbPr1, YPbPr2
Select Sub-screen source:
3. Sub Source
VGA, HDMI, DVI, Video, S-Video, YPbPr1, YPbPr2
4. Swap Swap main screen and sub-screen source
5. PIP Position Sub-screen display horizontal/vertical position adjustment
Adjust sub-screen display size:
6. PIP Size
Small, Medium, Large
Select main screen or sub-screen audio source:
7. Audio Selection
Main, Sub

The table below shows the functional combinations for PIP and SWAP (O PIP and Swap
are functional).

INPUT/ PIP SOURCE CHART

Sub VGA Video S-Video YPbPr1 YPbPr2 DVI HDMI
Main
Video O X X O O O O
S-Video O X X O O O O
YPbPr1 X O O X X O O
YPbPr2 X O O X X O O
VGA X O O X X O O

HDMI O O O O O X X

DVI O O O O O X X

16
 3 OSD FUNCTION
General Settings

English
Function Name Function
1. Menu Position OSD Menu horizontal/vertical position adjustment
Set the amount of time before the OSD disappears.
10 seconds
2. Menu Timeout
30 seconds
60 seconds
Select the OSD language:
3. Menu Language
English, French, Spanish
Set the monitor to turn off after a specified amount of time:
Off, 30 minutes, 60 minutes, 120 minutes
4. Sleep Timer
NOTE: The W4207 HD Monitor will take a few seconds to turn
on from sleep mode.
Autosource will detect a new incoming signal and
5. Autosource automatically switch the input source to the connection of the
new sources device.
Power saving mode. Backlight will turn off automatically after
6. DPMS
No Signal is detected for 1, 5 or 10 minutes.
7 System Info Displays the system information
8. LED Turns the LED power indicator On or Off
Resets all OSD menu settings of the W4207 HD Monitor back to
9. Factory Reset
the factory default values

17
 4 APPENDIX
Troubleshooting
No Power

English
Make sure the power cord is securely connected to the AC In jack on the back of
the W4207 HD Monitor.
Make sure the AC power cord is securely connected to the AC socket.
Plug another electrical device (such as a radio) to the power outlet to verify that the
outlet is supplying the proper voltage.

Power is suddenly turned off

Check if Sleep Timer is set. If so, turn it off.

Remote Control Does Not Work

Press only one button at a time.
Make sure the batteries are inserted correctly.
Replace the batteries with new ones, if necessary.

Remote Control Code Not Found in a Universal Remote

Purchase a separate learning remote control.
Go to www.westinghousedigital.com for a list of remote codes.

No Picture
Check the video connection for the source input.
Make sure the video cable connected to the W4207 HD Monitor is tightly secured to
the video output port on the back of the computer. If the other end of the video
cable is not attached properly to the W4207 HD Monitor, secure it tightly.
Adjust the brightness and contrast level.
If you are using a Macintosh computer older than G3, you need a Macintosh
adapter.

No Picture or No Input Signal (VGA Source)

Check the VGA cable connection.
Lower the video resolution on the computer and try plugging in the cable again.

Picture is cut off/with sidebar screen.

Use Auto Adjust.
Make sure the aspect ratio is set correctly.

Wrong or Abnormal Colors

If any colors (red, green, or blue) are missing, check the video cable to make sure it
is connected securely. Loose or broken pins in the cable connector could cause an
improper connection.
Connect the W4207 HD Monitor to another computer.

18
 4 APPENDIX
Troubleshooting (contd)

English
AUDIO Interconnection Issues
Remember that the S-Video and Composite AV input share the same audio source.

No Sound
Check the audio connection.
Press MUTE on the remote control, so that MUTE disappears from the screen.
Press the Volume + (Up) key on the remote control.
.

How Can I Find More Help?

Log on to: www.westinghousedigital.com
Contact Westinghouse Customer Service at (866) 287-5555 or write us at
[email protected]

19
 4 APPENDIX

Cleaning the W4207 HD Monitor

English
MAKE SURE THE W4207 HD Monitor IS TURNED OFF
NEVER SPRAY OR POUR ANY LIQUID DIRECTLY ONTO THE SCREEN OR CASE

To clean the screen:

1. Wipe the screen with a clean, soft, lint-free cloth. This removes dust and other particles.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based glass cleaner
onto a clean, soft, lint-free cloth, and wipe the screen.

To clean the case:

1. Use a soft, dry cloth.
2. If still not clean, apply a small amount of non-ammonia, non-alcohol based, mild non-
abrasive detergent onto a clean, soft, lint-free cloth, then wipe the surface.

Disclaimer
Westinghouse Digital does not recommend the use of any ammonia or alcohol-based cleaners on
the W4207 HD Monitor screen or case. Some chemical cleaners have been reported to damage
the screen and or W4207 HD Monitor case. Westinghouse Digital will not be liable for damage
resulting from use of any ammonia or alcohol-based cleaners.

20
 4 APPENDIX

Specifications

English
Model Name W4207
42.02" TFT (Thin Film Transistor), Active Matrix LCD, 1366 x 768 vertical
Panel Type
stripe
Color Anti-glare coating
Viewing Angles 178 (H) / 178 (V) (typ.)
Input Signal Video/Audio RGB Analog * 1 (75 ohms, 0.7 Vp-p)/Mini-Stereo *1
- H/V separated (TTL) for PC
HDMI-HDCP x 1
DVI-D x1 (HDCP support) / RCA (L/R) x 1
- fh: 30-68 kHz, fv: 58-72 Hz
Component Video x 2 / RCA (L/R) Stereo x 2
Composite * 1 / SVideo * 1 / RCA (L/R) stereo * 1 (shared)
Output Signal Audio RCA (L/R)
Compatibility 480i, 480P, 720P, 1080i,

PC Compatible Recommended 1366 x 768 @ 60Hz

1280 x 1024 @ 60 Hz
Supported 1024 x 768 @ 60 Hz
1280 x 800 @ 60Hz
1280 x 720 @ 60 Hz 800 x 600 @ 60 Hz
1280 x 800 @ 60 Hz 640 x 480 @ 60 Hz
720 x 400 @ 70 Hz
1360 x 768 @ 60 Hz

Speaker Output 15W (x2 Channels)

Power Voltage ~100-264 VAC, 50-60Hz, 3.5A, universal.
Temperature Operating 5 to +35 C (Hum < 90%)
Storage -10 to +50o C (Hum < 35%)
Operating 20 to 80% non-condensing
Humidity (Relative)
Storage 20 to 90% non-condensing.
41.95 (W) x 27.34 (H) x 4.87 (D) without base
Dimensions Physical
41.95 (W) x 29.20 (H) x 8.90 (D) with base
Weight Net / Gross 62.83 lbs / 72.75 lbs
Regulations UL/C-UL, FCC-B
Power saving On <300W Typical (Blue LED)
Modes Active Off <1.4W (LED Off)
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result in
permanent damage to the W4207 HD Monitor.
Note: Product Specifications are subject to change without notice.

21