Distortion Less Line

Download as pdf or txt
Download as pdf or txt
You are on page 1of 6

3/1/2005 The Distortionless Line.

doc 1/6

The Distortionless Line


Recall that the phase velocity v p (i.e., propagation velocity) of a
wave in a transmission line is:

ω
vp =
β
where:

β = Im {γ }
= Im { ( R + j ω L)( G + j ωC ) }
Thus, for a lossy line, the phase velocity v p is a function of
frequency ω (i.e., v p (ω ) )—this is bad!

Any signal that carries significant information must has some


non-zero bandwidth. In other words, the signal energy (as well
as the information it carries) is spread across many frequencies.

If the different frequencies that comprise a signal travel at


different velocities, that signal will arrive at the end of a
transmission line distorted. We call this phenomenon signal
dispersion.

Recall for lossless lines, however, the phase velocity is


independent of frequency—no dispersion will occur!
3/1/2005 The Distortionless Line.doc 2/6

1
vp = [R = 0, G = 0 ]
LC

Of course, a perfectly lossless line is impossible, but we find


phase velocity is approximately constant if the line is low-loss.

Therefore, dispersion distortion on low-loss lines is most often


not a problem.

Q: You say “most often”


not a problem—that
phrase seems to imply
that dispersion
sometimes is a problem!

A: Even for low-loss transmission lines, dispersion can be


a problem if the lines are very long—just a small
difference in phase velocity can result in significant
differences in propagation delay if the line is very long!

Modern examples of long transmission lines include phone


lines and cable TV. However, the original long
transmission line problem occurred with the telegraph, a
device invented and implemented in the 19th century.

Telegraphy was the essentially the


first electrical engineering technology
ever implemented, and as a result, led
to the first ever electrical engineers!
3/1/2005 The Distortionless Line.doc 3/6

Early telegraph “engineers”


discovered that if they made their
telegraph lines too long, the dots and
dashes characterizing Morse code
turned into a muddled, indecipherable
mess. Although they did not realize
it, they had fallen victim to the
heinous effects of dispersion!

Thus, to send messages over long


distances, they were forced to
implement a series of
intermediate “repeater” stations,
wherein a human operator
received and then retransmitted
a message on to the next station.
This really slowed things down!

Q: Is there any way to prevent


dispersion from occurring?

A: You bet! Oliver Heaviside figured


out how in the 19th Century!

Heaviside found that a transmission line would be distortionless


(i.e., no dispersion) if the line parameters exhibited the
following ratio:
R G
=
L C
3/1/2005 The Distortionless Line.doc 4/6

Let’s see why this works. Note the complex propagation


constant γ can be expressed as:

γ = (R + j ω L )(G + j ωC )
= LC (R L + j ω )(G C + j ω )

Then IF:
R G
=
L C
we find:

γ = LC (R L + j ω )(G C + j ω )
= LC (R L + j ω )(R L + j ω )
= (R L + j ω ) LC
C
=R + j ω LC
L

Thus:
C
α = Re {γ } = R
L

β = Im {γ } = ω LC

The propagation velocity of the wave is thus:

ω 1
vp = =
β LC
3/1/2005 The Distortionless Line.doc 5/6

The propagation velocity is independent of frequency! This


lossy transmission line is not dispersive!

Q: Right. All the transmission


lines I use have the property
that R L > G C . I’ve never
found a transmission line with
this ideal property R L = G C !

A: It is true that typically R L > G C . But, we can reduce the


ratio R L (until it is equal to G C ) by adding series inductors
periodically along the transmission line.

This was Heaviside’s solution—and it worked! Long distance


transmission lines were made possible.

Q: Why don’t we increase G instead?

A:
3/1/2005 The Distortionless Line.doc 6/6

“Oliver Heaviside was born in the same London slums as Dickens. Scarlet fever left him partly
deaf. He compensated with shyness and sarcasm. Heaviside finished his only schooling in 1865. He was
16 and a top student, but he'd failed geometry. He loathed all that business of deducing one fact from
another. He meant to invent knowledge -- not to compute it.

Heaviside went to work as a telegrapher. That drew him into


the study of electricity. Then he read Maxwell's new Treatise
on Electricity and Magnetism, and it seemed to have mystical
beauty. It changed his life. He quit work and sealed himself in
a room in his family's house. There he reduced Maxwell's
whole field theory into two equations. He gave electric theory
its modern shape and form. Hertz got the credit for that. But
in the fine print Hertz admits his ideas came from Heaviside.

Next Heaviside picked up the radical new idea of vector


analysis. His most important ally was the reclusive American
genius J. Willard Gibbs. Vector analysis won out, but only
after Heaviside -- this shy man with his acid pen -- had
started a war. He brought that war to full pitch a few years
later with something called operational calculus.

He invented this strange new math by leaping over logic. It was a powerful tool, but it wasn't rigorous.
Only people like Kelvin, Rayleigh, and Hertz saw the brilliance that was driving Heaviside faster than
method could follow. He knew what he was doing. He growled at his detractors, "Shall I refuse my
dinner because I do not fully understand ... digestion?"

Like vector analysis, Heaviside's calculus stood the test of time. So did the rest of his work. He gave
us the theory for long distance telephones. His math has served and shaped engineering. Yet his
biographer, Paul Nahin, writes a sad ending. Heaviside grew sick of fighting and faded off to Torquay
in Southwest England. There he lived out his last 25 years in a bitter retreat. You don't see much of
Heaviside's name today. But his magnificent works have been woven into the fabric of our textbooks.
He deserved a better end. Yet his huge accomplishments force a happy ending on a sad life.” (Taken
from http://www.uh.edu/engines/epi426.htm)

You might also like